Product Specifications

DDW4
DDW4--6590D
6590D--R3
12-port multiband dualpol planar array antenna, 4x 814-894 and 8x 2300–2400 MHz,
65 | 90° HPBW, 3x RET
l 2 columns for 814-894 MHz and 4 columns for 2300-2400 MHz

l Integrated with a calibration board

l Three internal RET’s control the antenna arrays

l Optimized for Software Defined Split 6 Sector applications

Electrical Specifications
Frequency Band, MHz 814–894 2300–2400
Gain, dBi 16.5 16.5
Beamwidth, Horizontal,
64 104
degrees
Beamwidth, Vertical, degrees 7.4 5.1
Beam Tilt, degrees 2–12 0–10
Beam Tilt Tolerance, degrees ±0.4 ±0.4
USLS (First Lobe), dB 20 18
Front-to-Back Ratio at 180°, dB 32 31
Coupling level, Amp, Antenna
26
port to Cal port, dB
Coupling level, max Amp ?,
±2
Antenna port to Cal port, dB
Coupler, max Amp ?, Antenna
0.9
port to Cal port, dB
Coupler, max Phase ?, Antenna
7
port to Cal port, degrees
Isolation, dB 28 23
Isolation, Intersystem, dB 28 28
Isolation, Cross Polarization,
28 19
port to port, dB
Isolation, Cross Polarization,
port to port, between two 28 20
columns, dB
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150
Input Power per Port,
300 250
maximum, watts
Polarization ±45° ±45°
Impedance 50 ohm 50 ohm

Electrical Specifications, BASTA*

Frequency Band, MHz 814–894 2300–2400
Gain by all Beam Tilts, average,
16.2 16.2
dBi
Gain by all Beam Tilts
±0.4 ±0.5
Tolerance, dB
2 ° | 16.2 0 ° | 16.3

Gain by Beam Tilt, average, dBi 7 ° | 16.4 5 ° | 16.4

12 ° | 16.1 10 ° | 15.9

Beamwidth, Horizontal
±4.9 ±8.9
Tolerance, degrees
Beamwidth, Vertical Tolerance,
±0.4 ±0.3
degrees

©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 5
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: February 12, 2018 May 24, 2018
Product Specifications
DDW4
DDW4--6590D
6590D--R3

USLS, beampeak to 20° above

16 15
beampeak, dB
Front-to-Back Total Power at
22 24
180° ± 30°, dB
CPR at Boresight, dB 16 20
CPR at Sector, dB 9 10

* CommScope® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA,
download the whitepaper Time to Raise the Bar on BSAs.

Electrical Specifications, Single Column

Frequency Band, MHz 814–894 2300–2400
Gain, dBi 16.2 16.2
Beamwidth, Horizontal,
66 104
degrees
Beamwidth, Vertical, degrees 7.5 5.1
Beamwidth, Vertical Tolerance,
±0.4
degrees
CPR at Boresight, dB 16 20
CPR at Sector, dB 17 10
Front-to-Back Total Power at
22 24
180° ± 30°, dB
USLS (First Lobe), dB 20 18
Input Power per Port,
300 250
maximum, watts

Electrical Specifications, Broadcast 65°

Frequency Band, MHz 814–894 2300–2400
Gain, dBi 18.1
Beamwidth, Horizontal,
63
degrees
Beamwidth, Horizontal
±2.4
Tolerance, degrees
Beamwidth, Vertical, degrees 5.1
Beamwidth, Vertical Tolerance,
±0.3
degrees
Null Fill, dB 18

Electrical Specifications, Service Beam

Frequency Band, MHz 814–894 2300–2400
Steered 0° Gain, dBi 21.4
Steered 0° Gain Tolerance, dBi ±0.5
Steered 0° Beamwidth,
28
Horizontal, degrees
Steered 0° CPR at Beampeak,
21
dB
Steered 0° Front-to-Back Total
30
Power at 180° ± 30°, dB
Steered 0° Horizontal Sidelobe,
-13
dB
Steered 30° Gain, dBi 21.0
Steered 30° Beamwidth,
30
Horizontal, degrees
Steered 30° CPR at Beampeak,
20
dB
Steered 30° Front-to-Back
29
Total Power at 180° ± 30°, dB

©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 2 of 5
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: February 12, 2018 May 24, 2018
Product Specifications
DDW4
DDW4--6590D
6590D--R3

Steered 30° Horizontal

-10
Sidelobe, dB

Electrical Specifications, Soft Split

Beamwidth, Horizontal 33 °
CPR at Beampeak 18 dB
Front-to-Back Total Power at 180° ± 30° 30 dB
Horizontal Sidelobe 15 dB

Beam Forming Weights

General Specifications
Operating Frequency Band 2300 – 2400 MHz | 814 – 894 MHZ
Antenna Type Sector

©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 3 of 5
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: February 12, 2018 May 24, 2018
Product Specifications
DDW4
DDW4--6590D
6590D--R3

Band Multiband
Performance Note Outdoor usage
Total Input Power, maximum 900 W @ 50 °C

Mechanical Specifications
RF Connector Quantity, total 12
RF Connector Quantity, low band 4
RF Connector Quantity, high band 8
RF Connector Interface 4.3-10 Female
Calibration Connector Interface N Female
Calibration Connector Quantity 1
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and
mounting bracket
Radiator Material Low loss circuit board
Radome Material PVC, UV resistant
RF Connector Location Bottom
Wind Loading, frontal 1070.0 N @ 150 km/h
240.5 lbf @ 150 km/h
Wind Loading, lateral 375.0 N @ 150 km/h
84.3 lbf @ 150 km/h
Wind Loading, maximum 1385.0 N @ 150 km/h
311.4 lbf @ 150 km/h
Wind Speed, maximum 241 km/h | 150 mph

Dimensions
Length 2688.0 mm | 105.8 in
Width 498.0 mm | 19.6 in
Column Spacing 58 mm | 2 in
Depth 197.0 mm | 7.8 in
Net Weight, without mounting kit 50.0 kg | 110.2 lb

Remote Electrical Tilt (RET) Information

Input Voltage 10–30 Vdc
Internal RET High band (1) | Low band (2)
Power Consumption, idle state, maximum 1W
Power Consumption, normal conditions, maximum 10 W
Protocol 3GPP/AISG 2.0 (Single RET)
RET Interface RS-485 Male (input port, 2) | 8-pin DIN Female
RET Interface, quantity 1 female | 1 male

Packed Dimensions
Length 2880.0 mm | 113.4 in
Width 608.0 mm | 23.9 in
Depth 352.0 mm | 13.9 in
Shipping Weight 73.2 kg | 161.4 lb

©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 4 of 5
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: February 12, 2018 May 24, 2018
Product Specifications
DDW4
DDW4--6590D
6590D--R3

Regulatory Compliance/Certifications
Agency Classification
RoHS 2011/65/EU Compliant by Exemption
China RoHS SJ/T 11364-2006 Above Maximum Concentration Value (MCV)
ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system

Included Products
BSAMNT-4 — Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one
scissor top bracket set and one bottom bracket set.

* Footnotes
Performance Note Severe environmental conditions may degrade optimum performance

©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 5 of 5
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: February 12, 2018 May 24, 2018