Timken Solid Block HU Catalog

Timken® Spherical Roller Bearing Solid-Block Housed Units
TIMKEN® HOUSED UNIT

CATALOG INDEX
OVERVIEW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
SHELF LIFE POLICY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Ball Bearing Housed Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Tapered Roller Bearing Type E Housed Units. . . . . . . . . . . . . . . . . B-1
Spherical Roller Bearing Solid-Block Housed Units. . . . . . . . . . . C-1
Timken® SAF Split-Block Housed Units. . . . . . . . . . . . . . . . . . . . . . D-1
Timken® SNT Plummer Blocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-1
TIMKEN® HOUSED UNIT CATALOG 1

TIMKEN
OVERVIEW
GROW STRONGER WITH TIMKEN

Every day, people around the world count on the strength of
Timken. Our expertise in metallurgy, friction management and
mechanical power transmission helps them accelerate
improvements in productivity and uptime.
We supply products and services that can help keep your

operations moving forward, whether you need drive train kits
for commercial vehicles, durable housings for bearings in dirty
environments, couplings that avoid metal-to-metal contact
between motors and gearboxes, repair services for rail
bearings, steel for an aircraft engine shaft, or other products
and services for your applications.
When you choose Timken, you receive more than high-quality

products and services: You gain a worldwide team of highly
trained and experienced Timken people committed to working
collaboratively with you to improve your business.
Globally, our 20,000 people provide reliable answers for a wide

range of operations in manufacturing, mining, medical
equipment, aerospace, transportation, oil and gas – and other
diverse industries.
2 TIMKEN® HOUSED UNIT CATALOG

TIMKEN
OVERVIEW
INCREASE YOUR EQUIPMENT UPTIME

In addition to high-quality bearings, engineered steel and
mechanical power transmission components, we provide
valuable integrated products and services. For example, we
offer repair services and equipment monitoring equipment
that can alert you to problems before they impact your uptime.
Additionally, we offer a broad selection of seals, premium

lubricants, lubricators, couplings and chain to keep your
operations moving smoothly.
Our 10 technology centers in the United States, Europe and

Asia help pioneer tomorrow’s innovations with extensive
basic and applied scientific research programs. Through
internal development and strategic acquisition of innovative
companies, we continue to expand our portfolio of highly
engineered bearings, steel and components.

INTRODUCTION
HOUSED UNIT OVERVIEW
RUGGED TIMKEN® HOUSED UNITS

HELP PROTECT YOUR BEARINGS
When you choose sturdy Timken housings, your bearings can
keep rolling smoothly, even in harsh environments impacted by
dirt, debris, water and other contaminants. Timken engineers
designed special housings to withstand tough challenges on
the job.
Protected inside durable cast iron or steel, our highly
engineered Timken® ball and roller bearings work hard to
help you manufacture and transport materials, without
excessive maintenance due to contaminants.
Choose from our selection of housed units designed
with ball, tapered and spherical bearings. Select
enhancements like Timken® seals, lubricants and
housing covers best suited for each task. Our
engineers help you choose the right combination
of bearings and accessories to extend bearing life,
increase uptime and reduce maintenance costs.
Of course, you can interchange existing products
with Timken housed units because our bolt holes
and shaft centerline dimensions are designed to
conform to industry standards.
Timken® housed units reflect our strengths in
metallurgy, engineering and manufacturing. We produce
all our bearings in adherence with the Timken Quality
Management System for consistency in all our facilities
around the world.

INTRODUCTION
TIMKEN® BALL HOUSED UNITS OFFER EASY

INSTALLATION, FLEXIBLE OPTIONS
Timken® ball housed units, available in a variety of sizes and types, feature wide-inner-ring ball
bearings that provide additional shaft support and locking options. The Timken® wide-inner-ring
ball bearing is designed for straight shafts and can be positioned without shoulders, locknuts
or adapters.
For easy installation, our ball housed units can be ordered pre-assembled with bearings, housings,
seals and locking systems. Choose from pillow blocks, flanged cartridges, take-up units and
cylindrical cartridges. Our cast-iron, pressed-steel and other optional materials give you durable
choices for the exterior covers. Timken® locking options include set screws, self-locking collars
and concentric collars.
Timken® Shaft Guarding Technology™ deters set-screw damage to shafts by placing a hardened
band in the groove along the inner ring of the bearing. The set screws press against the band to
transfer gripping pressure onto the shaft, preventing nicks, as well as raised-metal or permanent
shaft damage. The stainless-steel band resists corrosion on the shaft. This system is particularly
helpful for applications where it would be expensive and time-consuming to replace shafts.
TYPICAL INDUSTRIES AND APPLICATIONS

Use Timken ball bearing housed units in agricultural applications, fans, blowers, food
processing devices and conveyors.

INTRODUCTION
TIMKEN® TYPE E HOUSED UNITS REPEL CONTAMINANTS,

ENHANCE PERFORMANCE
Timken® Type E tapered roller bearing housed units feature double-lip seals and locking collars
that protect against water and other contaminants. This double-lip seal design blocks debris and
retains grease better than single-lip or triple-lip seals, according to Timken 2012 laboratory tests.
Its cast-iron exterior includes a corrosion-resistant electro-coat finish for the housing and collar,
a more durable shield than industry-standard powder coating or black oxide. Set screws with
nylon patches reduce back-out, even in rigorous applications.
Premium Timken® tapered roller bearings inside Type E housings are manufactured with advanced
technology that results in longer predicted useful bearing life than other housed units with standard
bearings. Designed with optimized bearing profiles and improved surface finishes, Timken tapered
roller bearings operate efficiently within the housing.

Use Timken Type E housings for pulp and paper, power generation, mining, cement and aggregate
industries. Our Type E housed units also are widely used in equipment for air-handling and
treatment of water and waste water. Other common machine applications include mixers, washers,
shredders, mills and oven/furnace roller beds.

INTRODUCTION
TIMKEN® SPHERICAL ROLLER BEARING SOLID-BLOCK

HOUSED UNITS WITHSTAND HARSH CONDITIONS
Timken® spherical roller bearing solid-block housed units stand up to rugged conditions. Composed
of solid steel, they withstand most falling debris and handle up to ±1.5 degrees of misalignment.
The steel used in these products is up to two times stronger than cast iron, which may break or
pound out in tough applications.
Timken spherical roller bearing solid-block housed units come in five locking configurations:
single and double set screws, eccentric locks for reversing applications, tapered-adaptor locks
and double-tapered locks.
Choose from three sealing options: labyrinth seals (for high-speed, high-temperature applications)
and triple-lip seals made of either nitrile or urethane. Timken® steel auxiliary covers provide an
extra layer of protection, and they can be filled with Timken lubricants.

Use Timken spherical roller bearing solid-block housed units in metals mills, aggregate and
cement, mining, power generation, agriculture, pulp, paper, sawmills and other forest industries.

INTRODUCTION
TIMKEN® SAF SPLIT-BLOCK HOUSED UNITS BEAR

HEAVY LOADS
Timken® SAF split-block housed units are available in rugged cast iron, ductile iron or cast steel to
match a range of industrial environments. Our Timken SAF housed units have separate, matched
caps and bases. In larger sizes where housed units are heavier, this split-block design eases
installation. Remove the cap using a pry-tool slot for bearing inspection, service and replacement.
Available in a variety of shaft sizes, Timken SAF units offer the choice of tapered-bore design for
easy mounting or a straight-bore design for better axial location. The block can be converted from
fixed to float by removing the stabilizing ring. Several sealing options protect against contamination,
including a standard seal, which is a precision aluminum triple-ring labyrinth seal.

Use Timken SAF housed bearings in power generation, coal, mining, aggregate, cement, metals,
pulp, paper and other forestry operations, water treatment and food processing industries.
Applications include warehousing, conveyors, movable bridges/heavy structures, industrial
fans and blowers.

INTRODUCTION
TIMKEN® SNT SPLIT PLUMMER BLOCKS CARRY

HEAVY LOADS
Timken® SNT split plummer blocks are available in metric sizes. Their rugged cast iron, ductile
iron or cast steel designs stand up to a range of industrial environments. Our Timken SNT
plummer blocks have separate, matched caps and bases. In larger sizes where plummer blocks
are heavier, this split-block design eases installation. Remove the cap using a pry-tool slot for
bearing inspection, service and replacement.
Available in a variety of metric shaft sizes, Timken SNT plummer block units offer the choice
of tapered-bore design for easy mounting or straight-bore design for better axial location. The
block can be converted from fixed to float by adding or removing the locating rings. A variety
of sealing options help protect against contamination including all-purpose elastomer seals,
deflection-type V-ring seals, precision labyrinth seals and heavy-duty taconite seals for highly
contaminated environments.

Use Timken SNT plummer blocks in power generation (coal), mining, aggregate, cement, metals,
pulp, paper and other forestry operations, water treatment and food processing industries.
Applications include warehousing, conveyors, bulk material handling and industrial fans
and blowers.

TIMKEN
HOW TO USE THIS CATALOG
HOW TO USE THIS CATALOG

We designed this catalog to help you find
the Timken housed units best suited to your
specifications.
Timken offers an extensive range of bearings and
accessories in both imperial and metric sizes.
For your convenience, size ranges are indicated
in millimeters and inches. Contact your Timken
engineer to learn more about our complete line for the
special needs of your application.
This publication contains dimensions, tolerances and
load ratings, as well as engineering sections describing
fitting practices for shafts and housings, internal clearances,
materials and other bearing features. It provides valuable
assistance in the initial consideration of the type and
characteristics of the bearings that may best suit your
particular needs.
ISO and ANSI/ABMA, as used in this publication, refer to
the International Organization for Standardization and the
American National Standards Institute/American Bearing
Manufacturers Association.
Updates are made periodically to this catalog. Visit

www.timken.com for the most recent version of the Timken®
Housed Unit Catalog.
DISCLAIMER
This catalog is provided solely to give you analysis tools and data
to assist you in your product selection. Product performance is
affected by many factors beyond the control of Timken. Therefore,
you must validate the suitability and feasibility of all product
selections for your applications.
Timken products are sold subject to Timken terms and conditions
of sale, which include our limited warranty and remedy. You
can find these at http://www.timken.com/en-us/purchase/Pages/
TermsandConditionsofSale.aspx.
Please consult with your Timken engineer for more information
and assistance.
Every reasonable effort has been made to ensure the accuracy of
the information in this writing, but no liability is accepted for errors,
omissions or for any other reason.

TIMKEN
SHELF LIFE AND STORAGE OF GREASE-LUBRICATED BEARINGS AND COMPONENTS
SHELF LIFE AND STORAGE OF European REACH Compliance

GREASE-LUBRICATED BEARINGS Timken lubricants, greases and similar products sold in
AND COMPONENTS standalone containers or delivery systems are subject to the
European REACH (Registration, Evaluation, Authorization
To help you get the most value from our products, Timken and Restriction of CHemicals) directive. For import into the
provides guidelines for the shelf life of grease-lubricated European Union, Timken can sell and provide only those
ball and roller bearings, components and assemblies. Shelf lubricants and greases that are registered with ECHA
life information is based on Timken and industry test data (European CHemical Agency). For further information, please
and experience. contact your Timken engineer.
SHELF LIFE POLICY

Shelf life should be distinguished from lubricated bearing/
component design life as follows:
• Shelf life of the grease-lubricated bearing/component

represents the period of time prior to use or installation.
• The shelf life is a portion of the anticipated aggregate

design life. It is impossible to accurately predict design
life due to variations in lubricant bleed rates, oil migration,
operating conditions, installation conditions, temperature,
humidity and extended storage.
• Shelf life values, available from Timken, represent a

maximum limit and assume adherence to the storage
and handling guidelines suggested in this catalog or by a
Timken associate. Deviations from the Timken storage and
handling guidelines may reduce shelf life. Any specification
or operating practice that defines a shorter shelf life should
be used.
Timken cannot anticipate the performance of the grease
lubricant after the bearing or component is installed or placed
in service.
TIMKEN IS NOT RESPONSIBLE FOR THE SHELF LIFE

OF ANY BEARING/COMPONENT LUBRICATED BY
ANOTHER PARTY.

TIMKEN
STORAGE
Timken suggests the following storage guidelines for our
finished products (bearings, components and assemblies,
referred to as “products”):
• Unless directed otherwise by Timken, products should be

kept in their original packaging until they are ready to be
placed into service.
• Do not remove or alter any labels or stencil markings on the

packaging.
• Products should be stored in such a way that the packaging

is not pierced, crushed or otherwise damaged.
• After a product is removed from its packaging, it should be

placed into service as soon as possible.
• When removing a product that is not individually packaged

from a bulk pack container, the container should be
resealed immediately after the product is removed.

TIMKEN
• Do not use product that has exceeded its shelf life as

defined in the Timken shelf life guidelines statement.
• The storage area temperature should be maintained

between 0° C (32° F) and 40° C (104° F); temperature
fluctuations should be minimized.
• The relative humidity should be maintained below 60

percent and the surfaces should be dry.
• The storage area should be kept free from airborne

contaminants such as, but not limited to, dust, dirt,
harmful vapors, etc.
• The storage area should be isolated from undue vibration.

• Extreme conditions of any kind should be avoided.
Due to the fact that Timken is not familiar with your particular
storage conditions, we strongly suggest following these
guidelines. However, you may be required by circumstances
or applicable government requirements to adhere to stricter
storage requirements.
Most bearing components typically ship protected with
a corrosion-preventive compound that is not a lubricant.
These components may be used in oil-lubricated applications
without removal of the corrosion-preventive compound.
When using some specialized grease lubrications, we advise
you to remove the corrosion-preventive compound before
packing the bearing components with suitable grease.
We pre-pack most housed unit types in this catalog
with general-purpose grease suitable for their normal
applications. It may be necessary for you to frequently
replenish the grease for optimum performance.
Be careful in selecting lubrication, however, since different
lubricants are often incompatible. You may order housed units
pre-lubricated with a specified lubrication.
When you receive a bearing or housed unit shipment, do not
remove products from their packaging until they are ready for
mounting so they do not become corroded or contaminated.
Store bearings and housed units in an appropriate atmosphere
so they remain protected for the intended period.

TIMKEN
WARNINGS AND CAUTIONS
WARNING NOTE
Failure to observe the following warnings Do not use excessive force when mounting or
could create a risk of death or serious injury. dismounting the unit.
Follow all tolerance, fit, and torque recommendations.
Proper maintenance and handling practices are critical. Always follow the Original Equipment Manufacturer’s
Failure to follow selection recommendations and installation and maintenance guidelines.
installation instructions and to maintain proper lubrication
can result in equipment failure. Ensure proper alignment.
Never weld housed units.
Overheated bearings can ignite explosive atmospheres.
Special care must be taken to properly select, install, Do not heat components with an open flame.
maintain, and lubricate housed unit bearings that are Do not operate at bearing temperatures above 121° C (250° F).
used in or near atmospheres that may contain explosive
levels of combustible gases or accumulations of dust such
from grain, coal, or other combustible materials. Consult
your equipment designer or supplier for installation and
maintenance instructions.
CAUTION
Failure to follow these cautions
could create a risk of injury.
Do not use damaged housed units. The use of a damaged

housed unit can result in equipment damage and/or injury.
CAUTION
Failure to follow these cautions
may result in property damage.
If hammer and bar are used for installation or removal of a

part, use a mild steel bar (e.g., 1010 or 1020 grade). Mild steel
bars are less likely to cause release of high-speed fragments
from the hammer, bar or the part being removed.
Warnings for this product line are in this catalog and posted
on www.timken.com/en-us/products/warnings/Pages/
TimkenHousedUnitWarnings.aspx.

SPHERICAL ROLLER BEARING SOLID-BLOCK HOUSED UNITS
C
Spherical Roller Bearing
Solid-Block Housed Units
Timken® spherical roller bearing solid-block housed units provide
heavy-duty protection in harsh environments. Designed to handle
high temperatures, high speeds, heavy loads, misalignment,
and contaminated conditions, these solid-block housed units
are rugged enough to help protect bearings working in tough
conditions. With machined feet, tapped puller holes, black oxide
inner rings and multiple shaft locking options, these cast-steel
housed units are easy to install.
Updates are made periodically to this catalog. Visit www.timken.com
for the most recent version of the Timken® Housed Unit Catalog.
Typical Industries and Applications

Common industries include metal mills, aggregate and cement,
mining, power generation, agriculture, pulp and paper, and
sawmills and other forest industries. Applications include material
conveying, commercial and industrial building equipment,
sugar mill machinery, waste management and water treatment
equipment, off-highway and construction vehicles, fans, blowers,
cranes, lifts and hoists.
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2
Engineering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-7
Spherical Roller Bearing Solid-Block Housed Unit
Product Data Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-53
Timken® HOUSED UNIT CATALOG C-1

SPHERICAL ROLLER BEARING Solid-Block HOUSED UNItS
Introduction
INTRODUCTION
When your equipment faces harsh environments, you need roller Seals
bearing housed units that are rugged enough to withstand tough
conditions and deliver exceptional performance.
• Labyrinth seals – DuPont ™
Teflon® :
• High-speed applications.
You gain both with Timken spherical roller bearing solid-block
housed units. • Superior in dirty and wet conditions.
Designed specifically to perform under extreme conditions, • Able to operate at high temperatures.
Timken solid-block housed units are able to handle up to ±1.5 • Resistant to most chemicals.
degrees of misalignment and withstand the impact of falling
• Abrasion-resistant.
debris. Made of cast-steel housings and Timken® double-row
spherical roller bearings, their unique sealing design offers • Triple-lip seals – nitrile:
protection from contaminants.
• Self-purging.
Increased performance and durability helps decrease the overall
cost of ownership.
• Excellent in dirty and wet applications.
• Chemical- and corrosion-resistant.
Customizable Design Features to • Triple-lip seals – urethane:
Fit Your Equipment
• All the benefits of nitrile, plus resistance to abrasion.
With a full line of precision-made shaft-locking styles, seals
and housings, it’s easy to find the right housed unit to fit your
Secondary Seals
application. Timken spherical roller bearing solid-block housed
units interchange with a wide range of mounted roller bearings. • Closed-end covers.
Choose from many primary and secondary sealing mechanisms, • Open-end covers with:
and you decide how it’s built without paying custom charges.
• Triple-lip seal.
Housing Styles • DuPont Teflon.

• V-ring seal.
• Two-bolt pillow blocks.
• Four-bolt pillow blocks. • Piloted-flange cartridge backing plates with:
• Flange blocks. • Triple-lip seal.
• Piloted flanges. • Flange block backing plates with V-ring seal.

• Cartridges.
• Take-up blocks. Housing Coatings
• Cartridge units. • Powder coating – standard.
• Nickel plating – optional.
Locking Styles • Dykor coating – optional.
®
• Eccentric lock.
• Concentric lock (set screw) – single or double collar.
• Tapered adapter lock.
• V-Lock double tapered lock – single or double nut.
®
DuPontTM is a trademark of E.I. du Pont de Nemours and Company.

Teflon® is a registered trademark of E.I. du Pont de Nemours and Company.
Dykor® is a registered trademark of Whitford Corporation. Fig. C-1. Two-bolt pillow block. Fig. C-2. Four-bolt pillow block.
C-2 Timken® HOUSED UNIT CATALOG

SPHERICAL ROLLER BEARING Solid-Block HOUSED UNITS
Introduction
Outlasting the Competition INDUSTRIES AND APPLICATIONS

Timken solid-block housed units last a long time, yet you don’t • Metal mills.
pay extra for reliability. Experience an increase in performance
and durability and a decrease in your overall cost of ownership
• Aggregate and cement.
when you use a Timken solid-block housed unit. • Mining.
• Power generation.
Stands Up To Harsh Conditions • Sawmills and other forest process industries.
Protects Bearing. Harsh operating environments and lubrication
issues often lead to housed unit bearing damage. Timken solid-
• Pulp and paper.
block housed units multiply protection with primary and secondary • Material conveying.
seal options, as well as steel covers in sizes to fit these units. The • Commercial and industrial building equipment.
space between the primary and secondary seals offers a fillable
grease cavity for more protection.
• Sugar mills.
Handles Misalignment. Without a properly aligned shaft, the life
• Agriculture.
expectancy of most housed units decreases. However, Timken • Waste management and water treatment.
spherical roller bearing solid-block housed units run efficiently • Off-highway and construction vehicles.
on misaligned shafts up to ±1.5 degrees, thanks to their unique
design and Timken spherical roller bearings.
• HVAC, fans and blowers.
• Cranes, lifts and hoists.
Dependable Service
Every Timken spherical roller bearing solid-block housed unit is
backed by the service of our industry-leading experts who are
ready to assist you with product design, application knowledge
and field engineering support – anything you need to help improve
uptime and maximize equipment performance.
Fig. C-3. Flange block.
Fig. C-4. Take-up block.
Fig. C-5. Piloted-flange cartridge.
Fig. C-6. Cartridge block.

Introduction
Locking Styles
V-Lock® (DOUBLE-TAPERED lock) U.S. Pat. No. 7344313 Eccentric Lock – EC Series
The V-Lock locking mechanism is excellent in high-speed A reduced eccentric offset results in more mechanical advantage.
applications and designed to maximize shaft-holding power This series provides a secure lock that should not release from a
and minimize the time needed for installation and removal as properly prepared shaft even in reversing applications.
compared to conventional locking mechanisms. With no need for
feeler gages during installation, the V-Lock locking mechanism
offers superior holding power and is designed to eliminate
overtightening. Mechanical withdrawal is a feature of double-
nut units.
Fig. C-10. Eccentric lock.
Fig. C-7. V-Lock®.

Tapered Adapter Lock – TA/DV Series
Excellent in high-load applications, this design uses a longer
2300-series adapter for increased shaft contact. This design
offers the best shaft concentricity and highest capacity all while
Concentric Lock (set screw) – CL Series having the ability to accommodate undersized shafting.
Two set screws positioned at 60 degrees provide aggressive
holding power. When configured with a double-collared insert,
the bearing provides double the holding power compared to our
standard single-collared insert.
Fig. C-11. Tapered adapter lock.
Fig. C-8. Single set screw lock.

Housing Coatings
Powder coating – standard
All of our steel housings come powder-coated from the factory.
Powder coating gives a hard finish that is tough and durable.
Nickel plating – optional

Fig. C-9. Double set screw lock.
By nickel plating any of our housings, we are able to offer superior
resistance to wear and corrosion.
Dykor® coating – optional

Unaffected by most chemicals and solvents, Dykor coating is
designed to last in harsh chemical environments while having
extreme abrasion resistance.
Dykor® is a registered trademark of Whitford Corporation.

SPHERICAL ROLLER BEARING Solid-Block HOUSED UNITS
Introduction
SOLID-BLOCK housed unit Benefits

WARNING
Depending on how you configure your bearing for a specific
Failure to observe the following warnings
application, there’s a wide range of product benefits. could create a risk of death or serious injury.
• Multiple available sizes accommodate shaft diameters from
35 mm to 180 mm (1 ⁄ 16 in. to 7 in.).
7
Proper maintenance and handling practices are critical.
• Efficient built-to-order manufacturing. Quick delivery of Always follow installation instructions and maintain
customized configurations for specific applications. proper lubrication.
• Quicker installation. Machined feet, tapped puller holes, Overheated bearings can ignite explosive atmospheres.
Special care must be taken to properly select, install,
black oxide inner rings and multiple shaft-locking choices
make it simpler to install this heavy-duty unit. maintain, and lubricate housed unit bearings that are used
in or near atmospheres that may contain explosive levels
• Improved performance in high-contaminant environments. of combustible gases or accumulations of dust such as
Wide selection of primary and secondary seals, as well as from grain, coal, or other combustible materials. Consult
auxiliary covers. your equipment designer or supplier for installation and
• Bidirectional shaft expansion. Double-nut housing feature
allows expansion in both directions.
• Increased uptime. Robust steel housing, a wide variety of Caution
seal choices and a high-performance Timken spherical Failure to follow these cautions
roller bearing result in increased unit uptime. could create a risk of injury.
• Increased shaft holding power and reduced shaft damage.
Eccentric lock series is designed to stay tight in reversing Do not use damaged housed units. The use of a damaged
applications on precision-ground shafts. housed unit can result in equipment damage and/or injury.
• Fewer misalignment issues. Bearings accept up to ±1.5

degrees of misalignment. Caution
• Protection against over-lubrication. Pressure relief valves Failure to follow these cautions
come standard when unit is ordered with non-purgeable seals. may result in property damage.
• Dimensionally interchanges with a wide range of other
mounted roller bearing units. If hammer and bar are used for installation or removal of a
• One-time shaft alignment on all housing unit styles. part, use a mild steel bar (e.g., 1010 or 1020 grade). Mild steel
bars are less likely to cause release of high-speed fragments
Machined feet ends allow for precise installation and
from the hammer, bar or the part being removed.
blocking for faster future unit replacement.
• Easier removal with standard withdrawal holes on all
piloted-flange units. Warnings for this product line are in this catalog and posted
• Faster and easier changeover thanks to a comprehensive on www.timken.com/en-us/products/warnings/Pages/
TimkenHousedUnitWarnings.aspx.
product offering that interchanges with virtually all solid-
block roller bearing units.
Note DISCLAIMER
Do not use excessive force when mounting or This catalog is provided solely to give you analysis tools and data
dismounting the unit. to assist you in your product selection. Product performance is
affected by many factors beyond the control of Timken. Therefore,
Follow all tolerance, fit and torque recommendations.
you must validate the suitability and feasibility of all product
Always follow the Original Equipment Manufacturer’s selections for your applications.
installation and maintenance guidelines.
Timken products are sold subject to Timken terms and conditions
Ensure proper alignment. of sale, which include our limited warranty and remedy. You
Never weld housed units. can find these at http://www.timken.com/en-us/purchase/Pages/
TermsandConditionsofSale.aspx.
Do not heat components with an open flame.
Please consult with your Timken engineer for more information
Do not operate at bearing temperatures above 121°C (250°F). and assistance.
Every reasonable effort has been made to ensure the accuracy of
Updates are made periodically to this catalog. Visit the information in this writing, but no liability is accepted for errors,
www.timken.com for the most recent version of the Timken® omissions or for any other reason.
Housed Unit Catalog.

Introduction
Solid-Block Housed Unit Design

Flexibility through interchangeable components.
Double-row spherical roller bearing

Housing fit: J7, size-for-size
accepts misalignment.
to light interference.
Black oxide inner ring reduces shaft

fretting corrosion. Standard relief valve.
Optional bolt-on open and
Six primary seals in any combination: closed steel or urethane
• T seal standard labyrinth secondary seals.
(DuPont™ Teflon®).
• M seal standard lip (nitrile rubber).
• N seal optional (DuPont™ Viton®).
• O seal optional (urethane).
• B seal optional (nitrile rubber).
• C seal optional
(DuPont Viton).
Lubricated with premium Five shaft-locking styles:

industrial grease. • Single screw set.
• Double screw set.
• Eccentric.
• Tapered adapter.
• V-Lock®.
Easily converted to fixed or expansion

in the field.
Housing can be supplied with powder
(standard), nickel or Dykor® coatings.
Machined feet aid Housing manufactured from 75000 psi
in rapid installation tensile cast steel that retains the bearing-
and alignment. to-housing fit for those rough applications.

Fig. C-12. High performance plus superior ruggedness. Viton® is a registered trademark of E.I. du Pont de Nemours and Company.
Dykor® is a registered trademark of Whitford Corporation.

engineering
Engineering
The following topics are covered within this engineering section:
Bearing Load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-8

Normal Speed Ratings for Seals. . . . . . . . . . . . . . . . . . . . . . C-25
Seal Material Chemical Compatibility . . . . . . . . . . . . . . . . . C-28
Internal Radial Clearance. . . . . . . . . . . . . . . . . . . . . . . . . . . . C-30
Shafting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-32
Misalignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-33
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-33
Installation Guides. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-34
To view the complete engineering catalog, please visit

www.timken.com. To order the catalog, please contact your
Timken engineer and request a copy of the Timken Engineering
Manual, order number 10424.

Engineering • Bearing Load
Bearing Load
Solid-block housed unit bearings are excellent for many Belt Loads
applications including those with:
V-belt drives are common sources of drive loads. A good
• Heavy radial loads. approximation of drive load may be calculated from the formula:
• Heavy combined radial and thrust loads. Drive Load = (HP x 189000)/(Pulley Diameter x RPM)
• Shock loads. Drive Load = (KW x 189000)/(Pulley Diameter x RPM)
• Harsh contamination conditions. Load Sharing

• Low to moderate speeds. In some cases, bearings may share the load unequally, depending
• The possibility of misalignment. on their position in relationship to the load. Use the appropriate
Bearing loads generally come from one of three sources that formula below to determine the drive load on each bearing:
should all be evaluated and considered when selecting steel
housed unit bearings for your application. Contact your Timken
engineer for assistance in determining specific application loads b a
and for bearing recommendations.
• Static loads – weights of various components supported by

the bearings.
B A
• Drive loads – belts, chains or gears that exert forces on
the shaft. Load A = Drive Load x (a + b)/b
• Imposed loads – forces generated by equipment operation. Load B = Drive Load x a/b
Generally, bearing loads are described as being radial (load Fig. C-13. Overhung load.
perpendicular to the axis of the shaft) or axial (load parallel to
the axis of the shaft). Axial loads also are referred to as thrust
loads. Spherical roller bearings, by design, are very capable of b a
accepting heavy radial loads, even when combined with a thrust
load. Timken® Type E housed units are recommended for use in
applications when only thrust loads are present or when the
thrust component of the load is larger than the radial component. B A
To determine the allowable radial load at various RPMs for Load A = (Drive Load x b)/(a + b)
bearings supporting only radial loads, simply use the charts on Load B = (Drive Load x a)/(a + b)
pages C-10 – C-23. For bearings supporting both radial and thrust
Fig. C-14. Load between bearings.
loads, an equivalent radial load must first be calculated prior to
using these tables (see Dynamic Equivalent Radial Load
on page C-9).

Dynamic Equivalent Radial Load In addition, a service factor may be used where application
conditions are harsh. Extreme environmental conditions or heavy
Bearings that support a combination of radial load and thrust load shock or vibration will require the adjustment of load ratings
take an unequal load on one of the rows of rollers. The following before referring to the L10 tables. Please contact your Timken
formulas and bearing geometry factors are used to convert the engineer for additional information.
independent thrust and radial loads into a single equivalent
radial load. The calculated dynamic equivalent radial load (Pr) Standard spherical roller bearing life calculation:
will have the same effect on bearing life (L10) as a radial load of Bearing life = L10 = (C /Pr) 10 /3 x (16667/RPM)
the same magnitude.
where:
Pr = Fr + (Y1 x Fa) when Fa/Fr ≤ e
C = Dynamic capacity
Pr = (0.67 x Fr) + (Y2 x Fa) when Fa/Fr > e
(lbs., N)
where: Pr = Radial load/dynamic equivalent radial load
Pr = Dynamic equivalent radial load RPM = Revolutions per minute
Fr = Applied radial load (lbs., N)
Fa = Applied thrust (axial) load (lbs., N)
DISCLAIMER
Y1, Y2 and e are bearing geometry This catalog is provided solely to give you analysis tools and data
to assist you in your product selection. Product performance is
factors shown on pages C-10 and C-11. affected by many factors beyond the control of timken. Therefore,
the suitability and feasibility of all product selection must be
Bearing CALCULATED Life validated by you.
Customers select the bearing life of the bearings in equipment Terms and Conditions
they are building. In the absence of a customer bearing life target, Timken products are sold subject to our terms and conditions of
the following may be considered as a guideline: sale, which include its limited warranty and remedy, which terms
may be found at http://www.timken.com/en-us/purchase/pages/
• If the customers machinery operates eight hours a day, then termsandconditionsofsale.Aspx.
use a bearing life target of 20000 to 30000 hours. Please consult with your Timken engineer for more information
• If the customers machinery operates 24 hours a day, then and assistance.
use a bearing life target of 40000 to 60000 hours.
A note on minimum loads
In order for a spherical roller bearing to perform as designed,
some radial load should be present. This is particularly true if the
bearing is running at high speed. Although it is rarely an issue,
as the existing static loads (weights of the combined supported
components) usually provide an adequate radial load, there
are times when it may be necessary to use a shaft diameter
larger than the actual loads require. In these instances, the load
becomes a small percentage of the bearing’s capacity. Radial
loads less than 4 percent of C should be avoided.

Bearing Radial and Thrust Factors

TABLE C-1. V-Lock® Series (Tapered Bore, C3)
Equivalent Radial Load Factors
Bearing Dynamic Capacity Static Capacity
Shaft Dia. e Y1 Y2
No. C C0
mm kN kN
in. lbs. lbs.
50 140 142
22211 0.23 2.95 4.40
1 15 ⁄ 16 , 2 31400 31900
55 169 174
22212 0.24 2.84 4.23
2 3 ⁄ 16 , 2 1 ⁄ 4 38100 39000
55 206 216
22213 0.24 2.79 4.15
2 3 ⁄ 16 , 2 1 ⁄ 4 46400 48600
60, 65 213 231
22214 0.23 2.90 4.32
2 7 ⁄ 16 , 2 1 ⁄ 2 47800 52000
60, 65 222 240
22215 0.22 3.14 4.67
2 7 ⁄ 16 , 2 1 ⁄ 2 49900 54100
70, 75 254 278
22216 0.22 3.14 4.67
2 11 ⁄ 16 , 2 3 ⁄ 4, 2 15 ⁄ 16 , 3 57200 62500
70, 75 297 320
22217 0.22 3.07 4.57
2 11 ⁄ 16 , 2 3 ⁄ 4, 2 15 ⁄ 16 , 3 66900 71900
80, 85, 90 385 441
22219 0.23 2.88 4.29
3 3 ⁄ 16 , 3 1 ⁄ 4, 3 7 ⁄ 16 , 3 1 ⁄ 2 86600 99000
80, 85, 90 435 502
22220 0.24 2.85 4.24
3 3 ⁄ 16 , 3 1 ⁄ 4, 3 7 ⁄ 16 , 3 1 ⁄ 2 97700 113000
100 555 653
22222 0.25 2.73 4.06
3 11 ⁄ 16 , 3 3 ⁄ 4, 3 15 ⁄ 16 , 4 125000 147000
110 647 772
22224 0.25 2.70 4.02
– 145000 174000
110, 115 757 945
22226 0.26 2.62 3.90
4 7 ⁄ 16 , 4 1 ⁄ 2 170000 212000
125, 130 863 1060
22228 0.25 2.67 3.98
4 15 ⁄ 16 , 5 194000 237000
TABLE C-2. CL Series (Straight Bore, C normal)

Shaft Dia. e Y1 Y2
No. C C0
mm kN kN
in. lbs. lbs.
35 104 99.7
22208 0.27 2.47 3.67
1 7 ⁄ 16 , 1 1 ⁄ 2 23400 22400
40, 45 109 108
22209 0.26 2.64 3.93
1 11 ⁄ 16 , 1 3 ⁄ 4 24500 24200
50 117 118
22210 0.24 2.84 4.23
1 15 ⁄ 16 , 2 26300 26600
55 140 142
22211 0.23 2.95 4.40
2 3 ⁄ 16 , 2 1 ⁄ 4 31400 31900
60, 65 206 216
22213 0.24 2.79 4.15
2 7 ⁄ 16 , 2 1 ⁄ 2 46400 48600
70, 75 222 240
22215 0.22 3.14 4.67
2 11 ⁄ 16 , 2 3 ⁄ 4, 2 15 ⁄ 16 , 3 49900 54100
80, 85, 90 355 388
22218 0.23 2.90 4.31
3 3 ⁄ 16 , 3 1 ⁄ 4, 3 7 ⁄ 16 , 3 1 ⁄ 2 79700 87200
100 435 502
22220 0.24 2.85 4.24
3 15 ⁄ 16 , 4 97700 113000
110, 115 555 653
22222 0.25 2.73 4.06
4 7 ⁄ 16 , 4 1 ⁄ 2 125000 147000
125, 130 757 945
22226 0.26 2.62 3.90
4 15 ⁄ 16 , 5 170000 212000

TABLE C-3. EC Series (Straight Bore, C normal)

Shaft Dia. e Y1 Y2
No. C C0
mm kN kN
in. lbs. lbs.
35 104 99.7
22208 0.27 2.47 3.67
1 7 ⁄ 16 , 1 1 ⁄ 2 23400 22400
40, 45 109 108
22209 0.26 2.64 3.93
1 11 ⁄ 16 , 1 3 ⁄ 4 24500 24200
50 117 118
22210 0.24 2.84 4.23
1 15 ⁄ 16 , 2 26300 26600
55 140 142
22211 0.23 2.95 4.40
2 3 ⁄ 16 , 2 1 ⁄ 4 31400 31900
60, 65 206 216
22213 0.24 2.79 4.15
2 7 ⁄ 16 , 2 1 ⁄ 2 46400 48600
70, 75 220 240
22215 0.22 3.14 4.67
2 11 ⁄ 16 , 2 3 ⁄ 4, 2 15 ⁄ 16 , 3 49900 54100
80, 85, 90 355 388
22218 0.23 2.90 4.31
3 3 ⁄ 16 , 3 1 ⁄ 4, 3 7 ⁄ 16 , 3 1 ⁄ 2 79700 87200
100 435 502
22220 0.24 2.85 4.24
3 11 ⁄ 16 , 3 3 ⁄ 4, 3 15 ⁄ 16 , 4 97700 113000
110, 115 555 653
22222 0.25 2.73 4.06
4 7 ⁄ 16 , 4 1 ⁄ 2 125000 147000
125, 130 757 945
22226 0.26 2.62 3.90
4 15 ⁄ 16 , 5 170000 212000
140, 150 1270 1660
23230 0.32 2.08 3.10
5 7 ⁄ 16 , 5 1 ⁄ 2, 5 15 ⁄ 16 , 6 286000 372000
170, 180 1660 2200
23234 0.33 2.08 3.09
6 7 ⁄ 16 , 6 1 ⁄ 2, 6 15 ⁄ 16 , 7 373000 494000
TABLE C-4. TA/DV Series (Tapered Bore, C3)

Shaft Dia. e Y1 Y2
No. C C0
mm kN kN
in. lbs. lbs.
40 109 108
22209 0.26 2.64 3.93
1 7 ⁄ 16 , 1 1 ⁄ 2 24500 24200
45 117 118
22210 0.24 2.84 4.23
1 11⁄ 16 , 1 3 ⁄ 4 26300 26600
50 140 142
22211 0.23 2.95 4.40
1 15 ⁄ 16 , 2 31400 31900
55 169 174
22212 0.24 2.84 4.23
– 38100 39000
60 206 216
22213 0.24 2.79 4.15
2 3 ⁄ 16 , 2 1 ⁄ 4 46400 48600
65 222 240
22215 0.22 3.14 4.67
2 7 ⁄ 16 , 2 1 ⁄ 2 49900 54100
70 254 278
22216 0.22 3.14 4.67
2 11 ⁄ 16 , 2 3 ⁄ 4 57200 62500
75 297 320
22217 0.22 3.07 4.57
2 15 ⁄ 16 , 3 66900 71900
80 355 388
22218 0.23 2.90 4.31
3 3 ⁄ 16 , 3 1 ⁄ 4 79700 87200
85 385 441
22219 0.23 2.88 4.29
– 86600 99000
90 435 502
22220 0.24 2.85 4.24
3 7 ⁄ 16 , 3 1 ⁄ 2 97700 113000
100 555 653
22222 0.25 2.73 4.06
3 15 ⁄ 16 , 4 125000 147000
110 647 772
22224 0.25 2.70 4.02
4 3 ⁄ 16 , 4 1 ⁄ 4 145000 174000
115 757 945
22226 0.26 2.62 3.90
4 7 ⁄ 16 , 4 1 ⁄ 2 170000 212000
125 863 1060
22228 0.25 2.67 3.98
4 15 ⁄ 16 , 5 194000 237000

Load Ratings
TABLE C-5. V-LocK Series – Allowable radial load (kN/lbs.) at various RPM(1)
Shaft Bearing
C L10 Life Speed(2)
Diameter No.
mm kN
RPM
in. lbs.
50 100 200 500 1000 1200 1500 1800 2100 2400 2700 3000 3200 3500(1)
50.3 40.9 33.2 25.2 20.5 19.4 18.1 17.2 16.4 15.8 15.2 14.7 14.5 14.1
10000
11319 9194 7468 5673 4608 4362 4080 3863 3688 3543 3420 3314 3250 3164
36.2 29.4 23.9 18.1 14.7 14.0 13.1 12.4 11.8 11.3 10.9 10.6 10.4 10.1
30000
8141 6612 5371 4080 3314 3138 2934 2778 2653 2549 2460 2383 2338 2276
50 140 33.2 27.0 21.9 16.6 13.5 12.8 12.0 11.3 10.8 10.4 10.0 9.7 9.5 9.3
22211 40000
1 15 ⁄ 16 , 2 31400 7468 6066 4927 3743 3040 2878 2692 2549 2433 2338 2257 2186 2144 2088
29.4 23.9 19.4 14.7 12.0 11.3 10.6 10.0 9.6 9.2 8.9 8.6 8.4 8.2
60000
6612 5371 4362 3314 2692 2549 2383 2257 2155 2070 1998 1936 1899 1849
25.2 20.5 16.6 12.6 10.3 9.7 9.1 8.6 8.2 7.9 7.6 7.4 7.2 7.1
100000
5673 4608 3743 2843 2309 2186 2045 1936 1849 1776 1714 1661 1629 1586
50 100 200 500 1000 1200 1500 1800 2100 2400 2700 3000 3200 (1) 3500(1)
61.1 49.6 40.3 30.6 24.9 23.5 22.0 20.8 19.9 19.1 18.5 17.9 17.5 17.1
10000
13734 11155 9061 6883 5591 5293 4951 4687 4475 4300 4150 4021 3944 3839
43.9 35.7 29.0 22.0 17.9 16.9 15.8 15.0 14.3 13.8 13.3 12.9 12.6 12.3
30000
9878 8023 6517 4951 4021 3807 3561 3371 3219 3092 2985 2892 2837 2761
55 169 40.3 32.7 26.6 20.2 16.4 15.5 14.5 13.8 13.1 12.6 12.2 11.8 11.6 11.3
22212 40000
2 3 ⁄ 16 , 2 1 ⁄ 4 38100 9061 7360 5978 4541 3689 3492 3266 3092 2953 2837 2738 2653 2602 2533
35.7 29.0 23.5 17.9 14.5 13.8 12.9 12.2 11.6 11.2 10.8 10.4 10.2 10.0
60000
8023 6517 5293 4021 3266 3092 2892 2738 2614 2512 2425 2349 2304 2243
30.6 24.9 20.2 15.3 12.5 11.8 11.0 10.4 10.0 9.6 9.3 9.0 8.8 8.6
100000
6883 5591 4541 3450 2802 2653 2481 2349 2243 2155 2080 2015 1977 1924
50 100 200 500 1000 1200 1500 1800 2100 2400 2700 3000 (1) 3200(1) 3500(1)
74.4 60.4 49.1 37.3 30.3 28.7 26.8 25.4 24.2 23.3 22.5 21.8 21.4 20.8
10000
16726 13585 11035 8383 6809 6446 6029 5708 5450 5236 5054 4897 4803 4676
53.5 43.5 35.3 26.8 21.8 20.6 19.3 18.3 17.4 16.8 16.2 15.7 15.4 15.0
30000
12030 9771 7937 6029 4897 4636 4336 4105 3920 3766 3635 3522 3455 3363
55 206 49.1 39.9 32.4 24.6 20.0 18.9 17.7 16.8 16.0 15.4 14.8 14.4 14.1 13.7
22213 40000
2 3 ⁄ 16 , 2 1 ⁄ 4 46400 11035 8963 7280 5531 4492 4253 3978 3766 3596 3455 3335 3231 3169 3085
43.5 35.3 28.7 21.8 17.7 16.8 15.7 14.8 14.2 13.6 13.1 12.7 12.5 12.2
60000
9771 7937 6446 4897 3978 3766 3522 3335 3184 3059 2953 2861 2806 2732
37.3 30.3 24.6 18.7 15.2 14.4 13.4 12.7 12.2 11.7 11.3 10.9 10.7 10.4
100000
8383 6809 5531 4201 3413 3231 3022 2861 2732 2624 2533 2454 2407 2343
50 100 200 500 1000 1200 1500 1800 2100 2400 2700(1) 3000(1) 3200(1)
76.6 62.3 50.6 38.4 31.2 29.5 27.6 26.2 25.0 24.0 23.2 22.4 22.0
10000
17230 13995 11368 8636 7014 6641 6211 5880 5615 5394 5207 5045 4948
55.1 44.8 36.4 27.6 22.4 21.2 19.9 18.8 18.0 17.3 16.7 16.1 15.8
30000
12392 10066 8176 6211 5045 4776 4467 4229 4038 3880 3745 3628 3559
60, 65 213 50.6 41.1 33.4 25.3 20.6 19.5 18.2 17.3 16.5 15.8 15.3 14.8 14.5
22214 40000
2 7 ⁄ 16 , 2 1 ⁄ 2 47800 11368 9234 7500 5697 4628 4381 4098 3880 3704 3559 3435 3328 3265
44.8 36.4 29.5 22.4 18.2 17.3 16.1 15.3 14.6 14.0 13.5 13.1 12.9
60000
10066 8176 6641 5045 4098 3880 3628 3435 3280 3151 3042 2947 2891
38.4 31.2 25.3 19.3 15.6 14.8 13.8 13.1 12.5 12.0 11.6 11.2 11.0
100000
8636 7014 5697 4328 3515 3328 3113 2947 2814 2703 2610 2528 2480
Speeds referenced here may be higher than speed rating for seals. Please refer to the charts on pages C-25 and C-26.
(1)
Continued on next page.
For speeds greater than thermal reference speed, contact your Timken engineer.
(2)

Continued from previous page.
Shaft Bearing
C L10 Life Speed(2)
Diameter No.
mm kN
RPM
in. lbs.
50 100 200 500 1000 1200 1500 1800 2100 2400 2700(1) 3000(1) 3200(1)
80.0 65.0 52.8 40.1 32.6 30.8 28.8 27.3 26.1 25.0 24.2 23.4 23.0
10000
17987 14610 11867 9015 7322 6933 6484 6139 5861 5631 5436 5266 5166
57.5 46.7 38.0 28.8 23.4 22.2 20.7 19.6 18.8 18.0 17.4 16.8 16.5
30000
12937 10508 8535 6484 5266 4986 4663 4415 4216 4050 3909 3788 3715
60, 65 222 52.8 42.9 34.8 26.5 21.5 20.3 19.0 18.0 17.2 16.5 16.0 15.5 15.2
22215 40000
2 7 ⁄ 16 , 2 1 ⁄ 2 49900 11867 9639 7829 5948 4831 4574 4278 4050 3867 3715 3586 3475 3408
46.7 38.0 30.8 23.4 19.0 18.0 16.8 16.0 15.2 14.6 14.1 13.7 13.4
60000
10508 8535 6933 5266 4278 4050 3788 3586 3424 3290 3175 3077 3018
40.1 32.6 26.5 20.1 16.3 15.5 14.5 13.7 13.1 12.6 12.1 11.7 11.5
100000
9015 7322 5948 4518 3670 3475 3250 3077 2938 2822 2724 2639 2589
50 100 200 500 1000 1200 1500 1800 2100 2400 (1) 2700(1) 3000(1)
91.7 74.5 60.5 46.0 37.3 35.4 33.1 31.3 29.9 28.7 27.7 26.9
10000
20619 16748 13603 10334 8394 7947 7432 7037 6719 6455 6231 6037
66.0 53.6 43.5 33.1 26.9 25.4 23.8 22.5 21.5 20.7 19.9 19.3
30000
14829 12045 9784 7432 6037 5716 5346 5061 4832 4643 4481 4342
70, 75
254 60.5 49.1 39.9 30.3 24.6 23.3 21.8 20.7 19.7 18.9 18.3 17.7
2 11 ⁄ 16 , 2 3 ⁄ 4, 2 22216 40000
15 ⁄ 16 , 3
57200 13603 11049 8975 6818 5538 5243 4904 4643 4433 4259 4111 3983
53.6 43.5 35.4 26.9 21.8 20.7 19.3 18.3 17.5 16.8 16.2 15.7
60000
12045 9784 7947 6037 4904 4643 4342 4111 3925 3771 3640 3527
46.0 37.3 30.3 23.0 18.7 17.7 16.6 15.7 15.0 14.4 13.9 13.5
100000
10334 8394 6818 5179 4207 3983 3725 3527 3367 3235 3123 3026
50 100 200 500 1000 1200 1500 1800 2100(1) 2400(1) 2700(1)
107.3 87.1 70.8 53.8 43.7 41.3 38.7 36.6 35.0 33.6 32.4
10000
24115 19588 15910 12086 9817 9295 8693 8230 7858 7550 7287
77.1 62.7 50.9 38.7 31.4 29.7 27.8 26.3 25.1 24.2 23.3
30000
17344 14088 11443 8693 7061 6685 6252 5919 5652 5430 5241
70, 75
297 70.8 57.5 46.7 35.5 28.8 27.3 25.5 24.2 23.1 22.2 21.4
2 11 ⁄ 16 , 2 3 ⁄ 4, 2 22217 40000
15 ⁄ 16 , 3
66900 15910 12923 10497 7974 6477 6132 5735 5430 5184 4981 4808
62.7 50.9 41.3 31.4 25.5 24.2 22.6 21.4 20.4 19.6 18.9
60000
14088 11443 9295 7061 5735 5430 5078 4808 4591 4410 4257
53.8 43.7 35.5 26.9 21.9 20.7 19.4 18.3 17.5 16.8 16.2
100000
12086 9817 7974 6057 4920 4658 4357 4125 3938 3784 3652
50 100 200 500 1000 1200 1500 1800 2100(1) 2400(1) 2700(1)
138.9 112.8 91.6 69.6 56.5 53.5 50.1 47.4 45.2 43.5 42.0
10000
31216 25356 20595 15645 12708 12032 11252 10654 10172 9773 9433
99.9 81.1 65.9 50.1 40.7 38.5 36.0 34.1 32.5 31.3 30.2
30000
22452 18236 14813 11252 9140 8653 8093 7662 7316 7029 6785
80, 85, 90
385 91.6 74.4 60.4 45.9 37.3 35.3 33.0 31.3 29.9 28.7 27.7
3 3 ⁄ 16 , 3 1 ⁄ 4, 22219 40000
86600 20595 16729 13588 10322 8384 7938 7424 7029 6711 6448 6224
3 7 ⁄ 16 , 3 1 ⁄ 2
81.1 65.9 53.5 40.7 33.0 31.3 29.2 27.7 26.4 25.4 24.5
60000
18236 14813 12032 9140 7424 7029 6574 6224 5942 5709 5511
69.6 56.5 45.9 34.9 28.3 26.8 25.1 23.7 22.7 21.8 21.0
100000
15645 12708 10322 7841 6369 6030 5640 5339 5098 4898 4728
(1)
(2)

Load Ratings – continued

TABLE C-5. V-LocK Series – Allowable radial load (kN/lbs.) at various RPM(1) – continued
Shaft Bearing
C L10 Life Speed(2)
Diameter No.
mm kN
RPM
in. lbs.
50 100 200 500 1000 1200 1500 1800(1) 2100(1) 2400(1) 2700(1)
156.7 127.2 103.4 78.5 63.8 60.4 56.5 53.5 51.0 49.0 47.3
10000
35218 28606 23235 17651 14337 13574 12695 12019 11476 11025 10642
112.7 91.5 74.3 56.5 45.9 43.4 40.6 38.5 36.7 35.3 34.0
30000
25329 20574 16711 12695 10311 9762 9130 8644 8254 7930 7654
80, 85, 90
435 103.4 84.0 68.2 51.8 42.1 39.8 37.3 35.3 33.7 32.4 31.2
3 3 ⁄ 16 , 3 1 ⁄ 4, 22220 40000
97700 23235 18873 15329 11645 9459 8955 8375 7930 7571 7274 7021
3 7 ⁄ 16 , 3 1 ⁄ 2
91.5 74.3 60.4 45.9 37.3 35.3 33.0 31.2 29.8 28.7 27.7
60000
20574 16711 13574 10311 8375 7930 7416 7021 6704 6441 6217
78.5 63.8 51.8 39.3 32.0 30.3 28.3 26.8 25.6 24.6 23.7
100000
17651 14337 11645 8846 7185 6803 6362 6024 5752 5526 5334
50 100 200 500 1000 1200 1500(1) 1800(1) 2100(1) 2400(1)
200.4 162.8 132.2 100.5 81.6 77.3 72.2 68.4 65.3 62.7
10000
45058 36599 29727 22583 18343 17367 16242 15377 14683 14106
144.2 117.1 95.1 72.2 58.7 55.6 52.0 49.2 47.0 45.1
30000
32407 26323 21381 16242 13193 12490 11682 11060 10560 10145
100
555 132.2 107.4 87.2 66.3 53.8 51.0 47.7 45.1 43.1 41.4
3 11 ⁄ 16 , 3 3 ⁄ 4, 22222 40000
125000 29727 24146 19613 14899 12102 11458 10716 10145 9687 9306
3 15 ⁄ 16 , 4
117.1 95.1 77.3 58.7 47.7 45.1 42.2 40.0 38.2 36.7
60000
26323 21381 17367 13193 10716 10145 9488 8983 8577 8241
100.5 81.6 66.3 50.3 40.9 38.7 36.2 34.3 32.7 31.4
100000
22583 18343 14899 11318 9193 8704 8140 7707 7359 7070
50 100 200 500 1000 1200 1500 1800 2100 2400
232.5 188.8 153.4 116.5 94.6 89.6 83.8 79.3 75.8 72.8
10000
52268 42455 34484 26196 21278 20145 18841 17838 17032 16363
167.2 135.8 110.3 83.8 68.1 64.5 60.3 57.1 54.5 52.4
30000
37592 30534 24802 18841 15303 14489 13551 12829 12250 11769
110 647 153.4 124.6 101.2 76.9 62.4 59.1 55.3 52.4 50.0 48.0
22224 40000
– 145000 34484 28010 22751 17283 14038 13291 12430 11769 11237 10796
135.8 110.3 89.6 68.1 55.3 52.4 49.0 46.4 44.3 42.5
60000
30534 24802 20145 15303 12430 11769 11007 10421 9950 9559
116.5 94.6 76.9 58.4 47.4 44.9 42.0 39.8 38.0 36.5
100000
26196 21278 17283 13129 10664 10097 9443 8940 8536 8201
(1)
(2)

Shaft Bearing
C L10 Life Speed(2)
Diameter No.
mm kN
RPM
in. lbs.
50 100 200 500 1000 1200 (1)
1500 (1)
1800(1) 2100(1)
272.6 221.4 179.8 136.6 111.0 105.1 98.3 93.0 88.8
10000
61279 49774 40429 30712 24946 23618 22089 20913 19968
196.1 159.2 129.3 98.3 79.8 75.6 70.7 66.9 63.9

30000
44074 35799 29078 22089 17942 16987 15887 15041 14362
110, 115 757 179.8 146.1 118.6 90.1 73.2 69.3 64.8 61.4 58.6
22226 40000
4 7 ⁄ 16 , 4 1 ⁄ 2 170000 40429 32839 26673 20263 16458 15582 14573 13798 13174
159.2 129.3 105.1 79.8 64.8 61.4 57.4 54.3 51.9

60000
35799 29078 23618 17942 14573 13798 12904 12217 11665
136.6 111.0 90.1 68.5 55.6 52.7 49.2 46.6 44.5

100000
30712 24946 20263 15393 12503 11837 11071 10482 10008
50 100 200 500 1000(1) 1200(1) 1500(1) 1800(1)
311.1 252.7 205.2 155.9 126.6 119.9 112.1 106.2
10000
69931 56801 46137 35048 28468 26953 25208 23866
223.7 181.7 147.6 112.1 91.1 86.2 80.6 76.4

30000
50296 40853 33183 25208 20475 19385 18130 17165
125, 130 863 205.2 166.7 135.4 102.9 83.5 79.1 74.0 70.0
22228 40000
4 15 ⁄ 16 , 5 194000 46137 37475 30439 23123 18782 17782 16631 15746
181.7 147.6 119.9 91.1 74.0 70.0 65.5 62.0

60000
40853 33183 26953 20475 16631 15746 14726 13942
155.9 126.6 102.9 78.1 63.5 60.1 56.2 53.2

100000
35048 28468 23123 17566 14268 13508 12634 11961
(1)
(2)


TABLE C-6. CL SErIES – Allowable radial load (kN/lbs.) at various RPM(1)
Shaft Bearing
C L10 Life Speed(2)
Diameter No.
mm kN
RPM
in. lbs.
50 100 200 500 1000 1200 1500 1800 2100 2400 2700 3000 3200 3500
37.5 30.5 24.8 18.8 15.3 14.5 13.5 12.8 12.2 11.7 11.3 11.0 10.8 10.5
10000
8435 6851 5565 4227 3434 3251 3041 2879 2749 2641 2549 2470 2422 2358
27.0 21.9 17.8 13.5 11.0 10.4 9.7 9.2 8.8 8.4 8.2 7.9 7.7 7.5
30000
6067 4928 4002 3041 2470 2338 2187 2070 1977 1899 1833 1776 1742 1696
35 104 24.8 20.1 16.3 12.4 10.1 9.5 8.9 8.4 8.1 7.7 7.5 7.2 7.1 6.9
22208 40000
1 7 ⁄ 16 , 1 1 ⁄ 2 23400 5565 4520 3672 2789 2265 2145 2006 1899 1813 1742 1682 1629 1598 1556
21.9 17.8 14.5 11.0 8.9 8.4 7.9 7.5 7.1 6.9 6.6 6.4 6.3 6.1
60000
4928 4002 3251 2470 2006 1899 1776 1682 1606 1543 1489 1443 1415 1378
18.8 15.3 12.4 9.4 7.7 7.2 6.8 6.4 6.1 5.9 5.7 5.5 5.4 5.3
100000
4227 3434 2789 2119 1721 1629 1524 1443 1378 1323 1278 1238 1214 1182
50 100 200 500 1000 1200 1500 1800 2100 2400 2700 3000 3200 3500
39.3 31.9 25.9 19.7 16.0 15.1 14.2 13.4 12.8 12.3 11.9 11.5 11.3 11.0
10000
8831 7173 5827 4426 3595 3404 3183 3014 2878 2765 2669 2586 2536 2469
28.3 22.9 18.6 14.2 11.5 10.9 10.2 9.6 9.2 8.8 8.5 8.3 8.1 7.9
30000
6352 5159 4191 3183 2586 2448 2290 2168 2070 1988 1919 1860 1824 1776
40, 45 109 25.9 21.1 17.1 13.0 10.6 10.0 9.3 8.8 8.4 8.1 7.8 7.6 7.4 7.2
22209 40000
1 11 ⁄ 16 , 1 3 ⁄ 4 24500 5827 4733 3844 2920 2372 2246 2100 1988 1899 1824 1761 1706 1673 1629
22.9 18.6 15.1 11.5 9.3 8.8 8.3 7.8 7.5 7.2 6.9 6.7 6.6 6.4
60000
5159 4191 3404 2586 2100 1988 1860 1761 1681 1615 1559 1511 1482 1442
19.7 16.0 13.0 9.9 8.0 7.6 7.1 6.7 6.4 6.2 6.0 5.8 5.7 5.5
100000
4426 3595 2920 2218 1802 1706 1595 1511 1442 1386 1338 1296 1271 1237
50 100 200 500 1000 1200 1500 1800 2100 2400 2700 3000 3200 3500
42.2 34.3 27.8 21.1 17.2 16.3 15.2 14.4 13.7 13.2 12.7 12.3 12.1 11.8
10000
9480 7700 6255 4751 3859 3654 3417 3235 3089 2968 2865 2776 2723 2650
30.3 24.6 20.0 15.2 12.3 11.7 10.9 10.4 9.9 9.5 9.2 8.9 8.7 8.5
30000
6818 5538 4498 3417 2776 2628 2458 2327 2222 2135 2060 1996 1958 1906
50 117 27.8 22.6 18.4 13.9 11.3 10.7 10.0 9.5 9.1 8.7 8.4 8.1 8.0 7.8
22210 40000
1 15 ⁄ 16 , 2 26300 6255 5080 4127 3135 2546 2411 2255 2135 2038 1958 1890 1831 1796 1749
24.6 20.0 16.3 12.3 10.0 9.5 8.9 8.4 8.0 7.7 7.4 7.2 7.1 6.9
60000
5538 4498 3654 2776 2255 2135 1996 1890 1805 1734 1674 1622 1590 1548
21.1 17.2 13.9 10.6 8.6 8.1 7.6 7.2 6.9 6.6 6.4 6.2 6.1 5.9
100000
4751 3859 3135 2381 1934 1831 1713 1622 1548 1487 1436 1391 1364 1328
50 100 200 500 1000 1200 1500 1800 2100 2400 2700 3000 3200 3500 (1)
50.3 40.9 33.2 25.2 20.5 19.4 18.1 17.2 16.4 15.8 15.2 14.7 14.5 14.1
10000
11319 9194 7468 5673 4608 4362 4080 3863 3688 3543 3420 3314 3250 3164
36.2 29.4 23.9 18.1 14.7 14.0 13.1 12.4 11.8 11.3 10.9 10.6 10.4 10.1
30000
8141 6612 5371 4080 3314 3138 2934 2778 2653 2549 2460 2383 2338 2276
55 140 33.2 27.0 21.9 16.6 13.5 12.8 12.0 11.3 10.8 10.4 10.0 9.7 9.5 9.3
22211 40000
2 3 ⁄ 16 , 2 1 ⁄ 4 31400 7468 6066 4927 3743 3040 2878 2692 2549 2433 2338 2257 2186 2144 2088
29.4 23.9 19.4 14.7 12.0 11.3 10.6 10.0 9.6 9.2 8.9 8.6 8.4 8.2
60000
6612 5371 4362 3314 2692 2549 2383 2257 2155 2070 1998 1936 1899 1849
25.2 20.5 16.6 12.6 10.3 9.7 9.1 8.6 8.2 7.9 7.6 7.4 7.2 7.1
100000
5673 4608 3743 2843 2309 2186 2045 1936 1849 1776 1714 1661 1629 1586
50 100 200 500 1000 1200 1500 1800 2100 2400 2700 3000 (1) 3200(1) 3500(1)
74.4 60.4 49.1 37.3 30.3 28.7 26.8 25.4 24.2 23.3 22.5 21.8 21.4 20.8
10000
16726 13585 11035 8383 6809 6446 6029 5708 5450 5236 5054 4897 4803 4676
53.5 43.5 35.3 26.8 21.8 20.6 19.3 18.3 17.4 16.8 16.2 15.7 15.4 15.0
30000
12030 9771 7937 6029 4897 4636 4336 4105 3920 3766 3635 3522 3455 3363
60, 65 206 49.1 39.9 32.4 24.6 20.0 18.9 17.7 16.8 16.0 15.4 14.8 14.4 14.1 13.7
22213 40000
2 7 ⁄ 16 , 2 1 ⁄ 2 46400 11035 8963 7280 5531 4492 4253 3978 3766 3596 3455 3335 3231 3169 3085
43.5 35.3 28.7 21.8 17.7 16.8 15.7 14.8 14.2 13.6 13.1 12.7 12.5 12.2
60000
9771 7937 6446 4897 3978 3766 3522 3335 3184 3059 2953 2861 2806 2732
37.3 30.3 24.6 18.7 15.2 14.4 13.4 12.7 12.2 11.7 11.3 10.9 10.7 10.4
100000
8383 6809 5531 4201 3413 3231 3022 2861 2732 2624 2533 2454 2407 2343
(1)
(2)


Shaft Bearing
C L10 Life Speed(2)
Diameter No.
mm kN
RPM
in. lbs.
50 100 200 500 1000 1200 1500 1800 2100 2400 2700(1) 3000(1) 3200(1)
80.0 65.0 52.8 40.1 32.6 30.8 28.8 27.3 26.1 25.0 24.2 23.4 23.0
10000
17987 14610 11867 9015 7322 6933 6484 6139 5861 5631 5436 5266 5166
57.5 46.7 38.0 28.8 23.4 22.2 20.7 19.6 18.8 18.0 17.4 16.8 16.5
30000
12937 10508 8535 6484 5266 4986 4663 4415 4216 4050 3909 3788 3715
70, 75
220 52.8 42.9 34.8 26.5 21.5 20.3 19.0 18.0 17.2 16.5 16.0 15.5 15.2
2 11 ⁄ 16 , 2 3 ⁄ 4, 22215 40000
49900 11867 9639 7829 5948 4831 4574 4278 4050 3867 3715 3586 3475 3408
2 15 ⁄ 16 , 3
46.7 38.0 30.8 23.4 19.0 18.0 16.8 16.0 15.2 14.6 14.1 13.7 13.4
60000
10508 8535 6933 5266 4278 4050 3788 3586 3424 3290 3175 3077 3018
40.1 32.6 26.5 20.1 16.3 15.5 14.5 13.7 13.1 12.6 12.1 11.7 11.5
100000
9015 7322 5948 4518 3670 3475 3250 3077 2938 2822 2724 2639 2589
50 100 200 500 1000 1200 1500 1800 2100 (1) 2400(1) 2700(1)
127.8 103.8 84.3 64.0 52.0 49.3 46.1 43.6 41.6 40.0 38.6
10000
28729 23335 18954 14399 11695 11073 10356 9805 9362 8994 8682
91.9 74.7 60.6 46.1 37.4 35.4 33.1 31.4 29.9 28.8 27.8
30000
20663 16783 13632 10356 8412 7964 7448 7052 6733 6469 6244
80, 85, 90
355 84.3 68.5 55.6 42.3 34.3 32.5 30.4 28.8 27.5 26.4 25.5
3 3 ⁄ 16 , 3 1 ⁄ 4, 22218 40000
79700 18954 15396 12505 9500 7716 7305 6832 6469 6176 5934 5728
3 7 ⁄ 16 , 3 1 ⁄ 2
74.7 60.6 49.3 37.4 30.4 28.8 26.9 25.5 24.3 23.4 22.6
60000
16783 13632 11073 8412 6832 6469 6050 5728 5469 5254 5072
64.0 52.0 42.3 32.1 26.1 24.7 23.1 21.9 20.9 20.1 19.4
100000
14399 11695 9500 7216 5862 5550 5190 4914 4692 4508 4351
50 100 200 500 1000 1200 1500 1800 (1) 2100(1) 2400(1) 2700(1)
156.7 127.2 103.4 78.5 63.8 60.4 56.5 53.5 51.0 49.0 47.3
10000
35218 28606 23235 17651 14337 13574 12695 12019 11476 11025 10642
112.7 91.5 74.3 56.5 45.9 43.4 40.6 38.5 36.7 35.3 34.0
30000
25329 20574 16711 12695 10311 9762 9130 8644 8254 7930 7654
100 435 103.4 84.0 68.2 51.8 42.1 39.8 37.3 35.3 33.7 32.4 31.2
22220 40000
3 15 ⁄ 16 , 4 97700 23235 18873 15329 11645 9459 8955 8375 7930 7571 7274 7021
91.5 74.3 60.4 45.9 37.3 35.3 33.0 31.2 29.8 28.7 27.7
60000
20574 16711 13574 10311 8375 7930 7416 7021 6704 6441 6217
78.5 63.8 51.8 39.3 32.0 30.3 28.3 26.8 25.6 24.6 23.7
100000
17651 14337 11645 8846 7185 6803 6362 6024 5752 5526 5334
50 100 200 500 1000 1200 1500(1) 1800(1) 2100(1) 2400(1)
200.4 162.8 132.2 100.5 81.6 77.3 72.2 68.4 65.3 62.7
10000
45058 36599 29727 22583 18343 17367 16242 15377 14683 14106
144.2 117.1 95.1 72.2 58.7 55.6 52.0 49.2 47.0 45.1
30000
32407 26323 21381 16242 13193 12490 11682 11060 10560 10145
110, 115 555 132.2 107.4 87.2 66.3 53.8 51.0 47.7 45.1 43.1 41.4
22222 40000
4 7 ⁄ 16 , 4 1 ⁄ 2 125000 29727 24146 19613 14899 12102 11458 10716 10145 9687 9306
117.1 95.1 77.3 58.7 47.7 45.1 42.2 40.0 38.2 36.7
60000
26323 21381 17367 13193 10716 10145 9488 8983 8577 8241
100.5 81.6 66.3 50.3 40.9 38.7 36.2 34.3 32.7 31.4
100000
22583 18343 14899 11318 9193 8704 8140 7707 7359 7070
50 100 200 500 1000 1200 (1) 1500(1) 1800(1) 2100(1)
272.6 221.4 179.8 136.6 111.0 105.1 98.3 93.0 88.8
10000
61279 49774 40429 30712 24946 23618 22089 20913 19968
196.1 159.2 129.3 98.3 79.8 75.6 70.7 66.9 63.9
30000
44074 35799 29078 22089 17942 16987 15887 15041 14362
125, 130 757 179.8 146.1 118.6 90.1 73.2 69.3 64.8 61.4 58.6
22226 40000
4 15 ⁄ 16 , 5 170000 40429 32839 26673 20263 16458 15582 14573 13798 13174
159.2 129.3 105.1 79.8 64.8 61.4 57.4 54.3 51.9
60000
35799 29078 23618 17942 14573 13798 12904 12217 11665
136.6 111.0 90.1 68.5 55.6 52.7 49.2 46.6 44.5
100000
30712 24946 20263 15393 12503 11837 11071 10482 10008
(1)
(2)


TABLE C-7. EC SErIES – Allowable radial load (kN/lbs.) at various RPM(1)
Shaft Bearing
C L10 Life Speed(2)
Diameter No.
mm kN
RPM
in. lbs.
50 100 200 500 1000 1200 1500 1800 2100 2400 2700 3000 3200 3500
37.5 30.5 24.8 18.8 15.3 14.5 13.5 12.8 12.2 11.7 11.3 11.0 10.8 10.5
10000 8435 6851 5565 4227 3434 3251 3041 2879 2749 2641 2549 2470 2422 2358
27.0 21.9 17.8 13.5 11.0 10.4 9.7 9.2 8.8 8.4 8.2 7.9 7.7 7.5
30000 6067 4928 4002 3041 2470 2338 2187 2070 1977 1899 1833 1776 1742 1696
35 104 24.8 20.1 16.3 12.4 10.1 9.5 8.9 8.4 8.1 7.7 7.5 7.2 7.1 6.9
22208 40000 5565 4520 3672 2789 2265 2145 2006 1899 1813 1742 1682
1 7 ⁄ 16 , 1 1 ⁄ 2 23400 1629 1598 1556
21.9 17.8 14.5 11.0 8.9 8.4 7.9 7.5 7.1 6.9 6.6 6.4 6.3 6.1
60000 4928 4002 3251 2470 2006 1899 1776 1682 1606 1543 1489 1443 1415 1378
18.8 15.3 12.4 9.4 7.7 7.2 6.8 6.4 6.1 5.9 5.7 5.5 5.4 5.3
100000 4227 3434 2789 2119 1721 1629 1524 1443 1378 1323 1278 1238 1214 1182
50 100 200 500 1000 1200 1500 1800 2100 2400 2700 3000 3200 3500
39.3 31.9 25.9 19.7 16.0 15.1 14.2 13.4 12.8 12.3 11.9 11.5 11.3 11.0
10000 8831 7173 5827 4426 3595 3404 3183 3014 2878 2765 2669 2586 2536 2469
28.3 22.9 18.6 14.2 11.5 10.9 10.2 9.6 9.2 8.8 8.5 8.3 8.1 7.9
30000 6352 5159 4191 3183 2586 2448 2290 2168 2070 1988 1919 1860 1824 1776
40, 45 109 25.9 21.1 17.1 13.0 10.6 10.0 9.3 8.8 8.4 8.1 7.8 7.6 7.4 7.2
22209 40000 5827 4733 3844 2920 2372 2246 2100 1988 1899 1824 1761
1 11 ⁄ 16 , 1 3 ⁄ 4 24500 1706 1673 1629
22.9 18.6 15.1 11.5 9.3 8.8 8.3 7.8 7.5 7.2 6.9 6.7 6.6 6.4
60000 5159 4191 3404 2586 2100 1988 1860 1761 1681 1615 1559 1511 1482 1442
19.7 16.0 13.0 9.9 8.0 7.6 7.1 6.7 6.4 6.2 6.0 5.8 5.7 5.5
100000 4426 3595 2920 2218 1802 1706 1595 1511 1442 1386 1338 1296 1271 1237
50 100 200 500 1000 1200 1500 1800 2100 2400 2700 3000 3200 3500
42.2 34.3 27.8 21.1 17.2 16.3 15.2 14.4 13.7 13.2 12.7 12.3 12.1 11.8
10000 9480 7700 6255 4751 3859 3654 3417 3235 3089 2968 2865 2776 2723 2650
30.3 24.6 20.0 15.2 12.3 11.7 10.9 10.4 9.9 9.5 9.2 8.9 8.7 8.5
30000 6818 5538 4498 3417 2776 2628 2458 2327 2222 2135 2060 1996 1958 1906
50 117 27.8 22.6 18.4 13.9 11.3 10.7 10.0 9.5 9.1 8.7 8.4 8.1 8.0 7.8
22210 40000 6255 5080 4127 3135 2546 2411 2255 2135 2038 1958 1890
1 15 ⁄ 16 , 2 26300 1831 1796 1749
24.6 20.0 16.3 12.3 10.0 9.5 8.9 8.4 8.0 7.7 7.4 7.2 7.1 6.9
60000 5538 4498 3654 2776 2255 2135 1996 1890 1805 1734 1674 1622 1590 1548
21.1 17.2 13.9 10.6 8.6 8.1 7.6 7.2 6.9 6.6 6.4 6.2 6.1 5.9
100000 4751 3859 3135 2381 1934 1831 1713 1622 1548 1487 1436 1391 1364 1328
50 100 200 500 1000 1200 1500 1800 2100 2400 2700 3000 3200 3500 (1)
50.3 40.9 33.2 25.2 20.5 19.4 18.1 17.2 16.4 15.8 15.2 14.7 14.5 14.1
10000 11319 9194 7468 5673 4608 4362 4080 3863 3688 3543 3420 3314 3250 3164
36.2 29.4 23.9 18.1 14.7 14.0 13.1 12.4 11.8 11.3 10.9 10.6 10.4 10.1
30000 8141 6612 5371 4080 3314 3138 2934 2778 2653 2549 2460 2383 2338 2276
55 140 33.2 27.0 21.9 16.6 13.5 12.8 12.0 11.3 10.8 10.4 10.0 9.7 9.5 9.3
22211 40000 7468 6066 4927 3743 3040 2878 2692 2549 2433 2338 2257
2 3 ⁄ 16 , 2 1 ⁄ 4 31400 2186 2144 2088
29.4 23.9 19.4 14.7 12.0 11.3 10.6 10.0 9.6 9.2 8.9 8.6 8.4 8.2
60000 6612 5371 4362 3314 2692 2549 2383 2257 2155 2070 1998 1936 1899 1849
25.2 20.5 16.6 12.6 10.3 9.7 9.1 8.6 8.2 7.9 7.6 7.4 7.2 7.1
100000 5673 4608 3743 2843 2309 2186 2045 1936 1849 1776 1714 1661 1629 1586
50 100 200 500 1000 1200 1500 1800 2100 2400 2700 3000 (1) 3200(1) 3500(1)
74.4 60.4 49.1 37.3 30.3 28.7 26.8 25.4 24.2 23.3 22.5 21.8 21.4 20.8
10000 16726 13585 11035 8383 6809 6446 6029 5708 5450 5236 5054 4897 4803 4676
53.5 43.5 35.3 26.8 21.8 20.6 19.3 18.3 17.4 16.8 16.2 15.7 15.4 15.0
30000 12030 9771 7937 6029 4897 4636 4336 4105 3920 3766 3635 3522 3455 3363
60, 65 206 49.1 39.9 32.4 24.6 20.0 18.9 17.7 16.8 16.0 15.4 14.8 14.4 14.1 13.7
22213 40000 11035 8963 7280 5531 4492 4253 3978 3766 3596 3455 3335
2 7 ⁄ 16 , 2 1 ⁄ 2 46400 3231 3169 3085
43.5 35.3 28.7 21.8 17.7 16.8 15.7 14.8 14.2 13.6 13.1 12.7 12.5 12.2
60000 9771 7937 6446 4897 3978 3766 3522 3335 3184 3059 2953 2861 2806 2732
37.3 30.3 24.6 18.7 15.2 14.4 13.4 12.7 12.2 11.7 11.3 10.9 10.7 10.4
100000 8383 6809 5531 4201 3413 3231 3022 2861 2732 2624 2533 2454 2407 2343
(1)
(2)

Shaft Bearing
C L10 Life Speed(2)
Diameter No.
mm kN
RPM
in. lbs.
50 100 200 500 1000 1200 1500 1800 2100 2400 2700(1) 3000(1) 3200(1)
80.0 65.0 52.8 40.1 32.6 30.8 28.8 27.3 26.1 25.0 24.2 23.4 23.0
10000 17987 14610 11867 9015 7322 6933 6484 6139 5861 5631 5436 5266 5166
57.5 46.7 38.0 28.8 23.4 22.2 20.7 19.6 18.8 18.0 17.4 16.8 16.5
30000 12937 10508 8535 6484 5266 4986 4663 4415 4216 4050 3909 3788 3715
70, 75
222 52.8 42.9 34.8 26.5 21.5 20.3 19.0 18.0 17.2 16.5 16.0 15.5 15.2
2 11 ⁄ 16 , 2 3 ⁄ 4, 22215 40000 11867 9639 7829 5948 4831 4574 4278 4050 3867 3715 3586
49900 3475 3408
2 15 ⁄ 16 , 3
46.7 38.0 30.8 23.4 19.0 18.0 16.8 16.0 15.2 14.6 14.1 13.7 13.4
60000 10508 8535 6933 5266 4278 4050 3788 3586 3424 3290 3175 3077 3018
40.1 32.6 26.5 20.1 16.3 15.5 14.5 13.7 13.1 12.6 12.1 11.7 11.5
100000 9015 7322 5948 4518 3670 3475 3250 3077 2938 2822 2724 2639 2589
50 100 200 500 1000 1200 1500 1800 2100 (1) 2400(1) 2700(1)
127.8 103.8 84.3 64.0 52.0 49.3 46.1 43.6 41.6 40.0 38.6
10000 28729 23335 18954 14399 11695 11073 10356 9805 9362 8994 8682
91.9 74.7 60.6 46.1 37.4 35.4 33.1 31.4 29.9 28.8 27.8
30000 20663 16783 13632 10356 8412 7964 7448 7052 6733 6469 6244
80, 85, 90
355 84.3 68.5 55.6 42.3 34.3 32.5 30.4 28.8 27.5 26.4 25.5
3 3 ⁄ 16 , 3 1 ⁄ 4, 22218 40000 18954 15396 12505 9500 7716 7305 6832 6469 6176 5934 5728
79700
3 7 ⁄ 16 , 3 1 ⁄ 2
74.7 60.6 49.3 37.4 30.4 28.8 26.9 25.5 24.3 23.4 22.6
60000 16783 13632 11073 8412 6832 6469 6050 5728 5469 5254 5072
64.0 52.0 42.3 32.1 26.1 24.7 23.1 21.9 20.9 20.1 19.4
100000 14399 11695 9500 7216 5862 5550 5190 4914 4692 4508 4351
50 100 200 500 1000 1200 1500 1800 (1) 2100(1) 2400(1) 2700(1)
156.7 127.2 103.4 78.5 63.8 60.4 56.5 53.5 51.0 49.0 47.3
10000 35218 28606 23235 17651 14337 13574 12695 12019 11476 11025 10642
112.7 91.5 74.3 56.5 45.9 43.4 40.6 38.5 36.7 35.3 34.0
30000 25329 20574 16711 12695 10311 9762 9130 8644 8254 7930 7654
100
435 103.4 84.0 68.2 51.8 42.1 39.8 37.3 35.3 33.7 32.4 31.2
3 11 ⁄ 16 , 3 3 ⁄ 4, 3 22220 40000 23235 18873 15329 11645 9459 8955 8375 7930 7571 7274 7021
15 ⁄ 16 , 4
97700
91.5 74.3 60.4 45.9 37.3 35.3 33.0 31.2 29.8 28.7 27.7
60000 20574 16711 13574 10311 8375 7930 7416 7021 6704 6441 6217
78.5 63.8 51.8 39.3 32.0 30.3 28.3 26.8 25.6 24.6 23.7
100000 17651 14337 11645 8846 7185 6803 6362 6024 5752 5526 5334
50 100 200 500 1000 1200 1500 (1) 1800(1) 2100(1) 2400(1)
200.4 162.8 132.2 100.5 81.6 77.3 72.2 68.4 65.3 62.7
10000 45058 36599 29727 22583 18343 17367 16242 15377 14683 14106
144.2 117.1 95.1 72.2 58.7 55.6 52.0 49.2 47.0 45.1
30000 32407 26323 21381 16242 13193 12490 11682 11060 10560 10145
110, 115 555 132.2 107.4 87.2 66.3 53.8 51.0 47.7 45.1 43.1 41.4
22222 40000 29727 24146 19613 14899 12102 11458 10716 10145 9687 9306
4 7 ⁄ 16 , 4 1 ⁄ 2 125000
117.1 95.1 77.3 58.7 47.7 45.1 42.2 40.0 38.2 36.7
60000 26323 21381 17367 13193 10716 10145 9488 8983 8577 8241
100.5 81.6 66.3 50.3 40.9 38.7 36.2 34.3 32.7 31.4
100000 22583 18343 14899 11318 9193 8704 8140 7707 7359 7070
50 100 200 500 1000 1200 (1) 1500(1) 1800(1) 2100(1)
272.6 221.4 179.8 136.6 111.0 105.1 98.3 93.0 88.8
10000 61279 49774 40429 30712 24946 23618 22089 20913 19968
196.1 159.2 129.3 98.3 79.8 75.6 70.7 66.9 63.9
30000 44074 35799 29078 22089 17942 16987 15887 15041 14362
125, 130 757 179.8 146.1 118.6 90.1 73.2 69.3 64.8 61.4 58.6
22226 40000 40429 32839 26673 20263 16458 15582 14573 13798 13174
4 15 ⁄ 16 , 5 170000
159.2 129.3 105.1 79.8 64.8 61.4 57.4 54.3 51.9
60000 35799 29078 23618 17942 14573 13798 12904 12217 11665
136.6 111.0 90.1 68.5 55.6 52.7 49.2 46.6 44.5
100000 30712 24946 20263 15393 12503 11837 11071 10482 10008
(1)
(2)


TABLE C-7. EC SErIES – Allowable radial load (kN/lbs.) at various RPM(1) – continued
Shaft Bearing
C L10 Life Speed(2)
Diameter No.
mm kN
RPM
in. lbs.
50 100 200 500 1000(1) 1200(1)
458.6 372.5 302.6 229.8 186.7 176.8
10000 103094 83738 68016 51669 41968 39735
329.8 267.9 217.6 165.3 134.3 127.1
30000 74147 60226 48919 37162 30185 28578
140, 150
1270 302.6 245.8 199.6 151.6 123.2 116.6
5 7 ⁄ 16 , 5 1 ⁄ 2, 23230 40000 68016 55247 44874 34089 27689 26215
286000
5 15 ⁄ 16 , 6
267.9 217.6 176.8 134.3 109.1 103.3
60000 60226 48919 39735 30185 24518 23213
229.8 186.7 151.6 115.2 93.6 88.6
100000 51669 41968 34089 25896 21034 19914
50 100 200 500 1000(1)
598.1 485.8 394.6 299.8 243.5
10000 134454 109211 88707 67387 54735
430.2 349.4 283.8 215.6 175.1
30000 96703 78547 63800 48466 39367
170, 180
1660 394.6 320.5 260.3 197.8 160.6
6 7 ⁄ 16 , 6 1 ⁄ 2, 23234 40000 88707 72052 58525 44459 36112
373000
6 15 ⁄ 16 , 7
349.4 283.8 230.5 175.1 142.2
60000 78547 63800 51822 39367 31976
299.8 243.5 197.8 150.2 122.0
100000 67387 54735 44459 33773 27433
(1)
(2)

TABLE C-8. TA/Dv SErIES – Allowable radial load (kN/lbs.) at various RPM(1)
Shaft Bearing
C L10 Life Speed(2)
Diameter No.
mm kN
RPM
in. lbs.
50 100 200 500 1000 1200 1500 1800 2100 2400 2700 3000 3200 3500
39.3 31.9 25.9 19.7 16.0 15.1 14.2 13.4 12.8 12.3 11.9 11.5 11.3 11.0
10000
8831 7173 5827 4426 3595 3404 3183 3014 2878 2765 2669 2586 2536 2469
28.3 22.9 18.6 14.2 11.5 10.9 10.2 9.6 9.2 8.8 8.5 8.3 8.1 7.9
30000
6352 5159 4191 3183 2586 2448 2290 2168 2070 1988 1919 1860 1824 1776
40 109 25.9 21.1 17.1 13.0 10.6 10.0 9.3 8.8 8.4 8.1 7.8 7.6 7.4 7.2
22209 40000
1 7 ⁄ 16 , 1 1 ⁄ 2 24500 5827 4733 3844 2920 2372 2246 2100 1988 1899 1824 1761 1706 1673 1629
22.9 18.6 15.1 11.5 9.3 8.8 8.3 7.8 7.5 7.2 6.9 6.7 6.6 6.4
60000
5159 4191 3404 2586 2100 1988 1860 1761 1681 1615 1559 1511 1482 1442
19.7 16.0 13.0 9.9 8.0 7.6 7.1 6.7 6.4 6.2 6.0 5.8 5.7 5.5
100000
4426 3595 2920 2218 1802 1706 1595 1511 1442 1386 1338 1296 1271 1237
50 100 200 500 1000 1200 1500 1800 2100 2400 2700 3000 3200 3500
42.2 34.3 27.8 21.1 17.2 16.3 15.2 14.4 13.7 13.2 12.7 12.3 12.1 11.8
10000
9480 7700 6255 4751 3859 3654 3417 3235 3089 2968 2865 2776 2723 2650
30.3 24.6 20.0 15.2 12.3 11.7 10.9 10.4 9.9 9.5 9.2 8.9 8.7 8.5
30000
6818 5538 4498 3417 2776 2628 2458 2327 2222 2135 2060 1996 1958 1906
45 117 27.8 22.6 18.4 13.9 11.3 10.7 10.0 9.5 9.1 8.7 8.4 8.1 8.0 7.8
22210 40000
1 11⁄ 16 , 1 3 ⁄ 4 26300 6255 5080 4127 3135 2546 2411 2255 2135 2038 1958 1890 1831 1796 1749
24.6 20.0 16.3 12.3 10.0 9.5 8.9 8.4 8.0 7.7 7.4 7.2 7.1 6.9
60000
5538 4498 3654 2776 2255 2135 1996 1890 1805 1734 1674 1622 1590 1548
21.1 17.2 13.9 10.6 8.6 8.1 7.6 7.2 6.9 6.6 6.4 6.2 6.1 5.9
100000
4751 3859 3135 2381 1934 1831 1713 1622 1548 1487 1436 1391 1364 1328
50 100 200 500 1000 1200 1500 1800 2100 2400 2700 3000 3200 3500(1)
50.3 40.9 33.2 25.2 20.5 19.4 18.1 17.2 16.4 15.8 15.2 14.7 14.5 14.1
10000
11319 9194 7468 5673 4608 4362 4080 3863 3688 3543 3420 3314 3250 3164
36.2 29.4 23.9 18.1 14.7 14.0 13.1 12.4 11.8 11.3 10.9 10.6 10.4 10.1
30000
8141 6612 5371 4080 3314 3138 2934 2778 2653 2549 2460 2383 2338 2276
140
50 33.2 27.0 21.9 16.6 13.5 12.8 12.0 11.3 10.8 10.4 10.0 9.7 9.5 9.3
22211 31400 40000
1 15 ⁄ 16 , 2 7468 6066 4927 3743 3040 2878 2692 2549 2433 2338 2257 2186 2144 2088
29.4 23.9 19.4 14.7 12.0 11.3 10.6 10.0 9.6 9.2 8.9 8.6 8.4 8.2
60000
6612 5371 4362 3314 2692 2549 2383 2257 2155 2070 1998 1936 1899 1849
25.2 20.5 16.6 12.6 10.3 9.7 9.1 8.6 8.2 7.9 7.6 7.4 7.2 7.1
100000
5673 4608 3743 2843 2309 2186 2045 1936 1849 1776 1714 1661 1629 1586
50 100 200 500 1000 1200 1500 1800 2100 2400 2700 3000 3200(1) 3500(1)
61.1 49.6 40.3 30.6 24.9 23.5 22.0 20.8 19.9 19.1 18.5 17.9 17.5 17.1
10000
13734 11155 9061 6883 5591 5293 4951 4687 4475 4300 4150 4021 3944 3839
43.9 35.7 29.0 22.0 17.9 16.9 15.8 15.0 14.3 13.8 13.3 12.9 12.6 12.3
30000
9878 8023 6517 4951 4021 3807 3561 3371 3219 3092 2985 2892 2837 2761
55 169 40.3 32.7 26.6 20.2 16.4 15.5 14.5 13.8 13.1 12.6 12.2 11.8 11.6 11.3
22212 40000
– 38100 9061 7360 5978 4541 3689 3492 3266 3092 2953 2837 2738 2653 2602 2533
35.7 29.0 23.5 17.9 14.5 13.8 12.9 12.2 11.6 11.2 10.8 10.4 10.2 10.0
60000
8023 6517 5293 4021 3266 3092 2892 2738 2614 2512 2425 2349 2304 2243
30.6 24.9 20.2 15.3 12.5 11.8 11.0 10.4 10.0 9.6 9.3 9.0 8.8 8.6
100000
6883 5591 4541 3450 2802 2653 2481 2349 2243 2155 2080 2015 1977 1924
50 100 200 500 1000 1200 1500 1800 2100 2400 2700 3000(1) 3200(1) 3500(1)
74.4 60.4 49.1 37.3 30.3 28.7 26.8 25.4 24.2 23.3 22.5 21.8 21.4 20.8
10000
16726 13585 11035 8383 6809 6446 6029 5708 5450 5236 5054 4897 4803 4676
53.5 43.5 35.3 26.8 21.8 20.6 19.3 18.3 17.4 16.8 16.2 15.7 15.4 15.0
30000
12030 9771 7937 6029 4897 4636 4336 4105 3920 3766 3635 3522 3455 3363
60 206 49.1 39.9 32.4 24.6 20.0 18.9 17.7 16.8 16.0 15.4 14.8 14.4 14.1 13.7
22213 40000
2 3 ⁄ 16 , 2 1 ⁄ 4 46400 11035 8963 7280 5531 4492 4253 3978 3766 3596 3455 3335 3231 3169 3085
43.5 35.3 28.7 21.8 17.7 16.8 15.7 14.8 14.2 13.6 13.1 12.7 12.5 12.2
60000
9771 7937 6446 4897 3978 3766 3522 3335 3184 3059 2953 2861 2806 2732
37.3 30.3 24.6 18.7 15.2 14.4 13.4 12.7 12.2 11.7 11.3 10.9 10.7 10.4
100000
8383 6809 5531 4201 3413 3231 3022 2861 2732 2624 2533 2454 2407 2343
(1)
(2)


TABLE C-8. TA/Dv SErIES – Allowable radial load (kN/lbs.) at various RPM(1) – continued
Shaft Bearing
C L10 Life Speed(2)
Diameter No.
mm kN
RPM
in. lbs.
50 100 200 500 1000 1200 1500 1800 2100 2400 2700(1) 3000(1) 3200(1)
80.0 65.0 52.8 40.1 32.6 30.8 28.8 27.3 26.1 25.0 24.2 23.4 23.0
10000
17987 14610 11867 9015 7322 6933 6484 6139 5861 5631 5436 5266 5166
57.5 46.7 38.0 28.8 23.4 22.2 20.7 19.6 18.8 18.0 17.4 16.8 16.5
30000
12937 10508 8535 6484 5266 4986 4663 4415 4216 4050 3909 3788 3715
65 222 52.8 42.9 34.8 26.5 21.5 20.3 19.0 18.0 17.2 16.5 16.0 15.5 15.2
22215 40000
2 7 ⁄ 16 , 2 1 ⁄ 2 49900 11867 9639 7829 5948 4831 4574 4278 4050 3867 3715 3586 3475 3408
46.7 38.0 30.8 23.4 19.0 18.0 16.8 16.0 15.2 14.6 14.1 13.7 13.4
60000
10508 8535 6933 5266 4278 4050 3788 3586 3424 3290 3175 3077 3018
40.1 32.6 26.5 20.1 16.3 15.5 14.5 13.7 13.1 12.6 12.1 11.7 11.5
100000
9015 7322 5948 4518 3670 3475 3250 3077 2938 2822 2724 2639 2589
50 100 200 500 1000 1200 1500 1800 2100 2400(1) 2700(1) 3000(1)
91.7 74.5 60.5 46.0 37.3 35.4 33.1 31.3 29.9 28.7 27.7 26.9
10000
20619 16748 13603 10334 8394 7947 7432 7037 6719 6455 6231 6037
66.0 53.6 43.5 33.1 26.9 25.4 23.8 22.5 21.5 20.7 19.9 19.3
30000
14829 12045 9784 7432 6037 5716 5346 5061 4832 4643 4481 4342
70 254 60.5 49.1 39.9 30.3 24.6 23.3 21.8 20.7 19.7 18.9 18.3 17.7
22216 40000
2 11 ⁄ 16 , 2 3 ⁄ 4 57200 13603 11049 8975 6818 5538 5243 4904 4643 4433 4259 4111 3983
53.6 43.5 35.4 26.9 21.8 20.7 19.3 18.3 17.5 16.8 16.2 15.7
60000
12045 9784 7947 6037 4904 4643 4342 4111 3925 3771 3640 3527
46.0 37.3 30.3 23.0 18.7 17.7 16.6 15.7 15.0 14.4 13.9 13.5
100000
10334 8394 6818 5179 4207 3983 3725 3527 3367 3235 3123 3026
50 100 200 500 1000 1200 1500 1800 2100(1) 2400(1) 2700(1)
107.3 87.1 70.8 53.8 43.7 41.3 38.7 36.6 35.0 33.6 32.4
10000
24115 19588 15910 12086 9817 9295 8693 8230 7858 7550 7287
77.1 62.7 50.9 38.7 31.4 29.7 27.8 26.3 25.1 24.2 23.3
30000
17344 14088 11443 8693 7061 6685 6252 5919 5652 5430 5241
75 297 70.8 57.5 46.7 35.5 28.8 27.3 25.5 24.2 23.1 22.2 21.4
22217 40000
2 15 ⁄ 16 , 3 66900 15910 12923 10497 7974 6477 6132 5735 5430 5184 4981 4808
62.7 50.9 41.3 31.4 25.5 24.2 22.6 21.4 20.4 19.6 18.9
60000
14088 11443 9295 7061 5735 5430 5078 4808 4591 4410 4257
53.8 43.7 35.5 26.9 21.9 20.7 19.4 18.3 17.5 16.8 16.2
100000
12086 9817 7974 6057 4920 4658 4357 4125 3938 3784 3652
50 100 200 500 1000 1200 1500 1800 2100(1) 2400(1) 2700(1)
127.8 103.8 84.3 64.0 52.0 49.3 46.1 43.6 41.6 40.0 38.6
10000
28729 23335 18954 14399 11695 11073 10356 9805 9362 8994 8682
91.9 74.7 60.6 46.1 37.4 35.4 33.1 31.4 29.9 28.8 27.8
30000
20663 16783 13632 10356 8412 7964 7448 7052 6733 6469 6244
80 355 84.3 68.5 55.6 42.3 34.3 32.5 30.4 28.8 27.5 26.4 25.5
22218 40000
3 3 ⁄ 16 , 3 1 ⁄ 4 79700 18954 15396 12505 9500 7716 7305 6832 6469 6176 5934 5728
74.7 60.6 49.3 37.4 30.4 28.8 26.9 25.5 24.3 23.4 22.6
60000
16783 13632 11073 8412 6832 6469 6050 5728 5469 5254 5072
64.0 52.0 42.3 32.1 26.1 24.7 23.1 21.9 20.9 20.1 19.4
100000
14399 11695 9500 7216 5862 5550 5190 4914 4692 4508 4351
50 100 200 500 1000 1200 1500 1800 2100(1) 2400(1) 2700(1)
138.9 112.8 91.6 69.6 56.5 53.5 50.1 47.4 45.2 43.5 42.0
10000
31216 25356 20595 15645 12708 12032 11252 10654 10172 9773 9433
99.9 81.1 65.9 50.1 40.7 38.5 36.0 34.1 32.5 31.3 30.2
30000
22452 18236 14813 11252 9140 8653 8093 7662 7316 7029 6785
85 385 91.6 74.4 60.4 45.9 37.3 35.3 33.0 31.3 29.9 28.7 27.7
22219 40000
– 86600 20595 16729 13588 10322 8384 7938 7424 7029 6711 6448 6224
81.1 65.9 53.5 40.7 33.0 31.3 29.2 27.7 26.4 25.4 24.5
60000
18236 14813 12032 9140 7424 7029 6574 6224 5942 5709 5511
69.6 56.5 45.9 34.9 28.3 26.8 25.1 23.7 22.7 21.8 21.0
100000
15645 12708 10322 7841 6369 6030 5640 5339 5098 4898 4728
(1)
(2)

Shaft Bearing
C L10 Life Speed(2)
Diameter No.
mm kN
RPM
in. lbs.
50 100 200 500 1000 1200 1500 1800(1) 2100(1) 2400(1) 2700(1)
156.7 127.2 103.4 78.5 63.8 60.4 56.5 53.5 51.0 49.0 47.3
10000
35218 28606 23235 17651 14337 13574 12695 12019 11476 11025 10642
112.7 91.5 74.3 56.5 45.9 43.4 40.6 38.5 36.7 35.3 34.0
30000
25329 20574 16711 12695 10311 9762 9130 8644 8254 7930 7654
90 435 103.4 84.0 68.2 51.8 42.1 39.8 37.3 35.3 33.7 32.4 31.2
22220 40000
3 7 ⁄ 16 , 3 1 ⁄ 2 97700 23235 18873 15329 11645 9459 8955 8375 7930 7571 7274 7021
91.5 74.3 60.4 45.9 37.3 35.3 33.0 31.2 29.8 28.7 27.7
60000
20574 16711 13574 10311 8375 7930 7416 7021 6704 6441 6217
78.5 63.8 51.8 39.3 32.0 30.3 28.3 26.8 25.6 24.6 23.7
100000
17651 14337 11645 8846 7185 6803 6362 6024 5752 5526 5334
50 100 200 500 1000 1200 1500(1) 1800(1) 2100(1) 2400(1)
200.4 162.8 132.2 100.5 81.6 77.3 72.2 68.4 65.3 62.7
10000
45058 36599 29727 22583 18343 17367 16242 15377 14683 14106
144.2 117.1 95.1 72.2 58.7 55.6 52.0 49.2 47.0 45.1
30000
32407 26323 21381 16242 13193 12490 11682 11060 10560 10145
100 555 132.2 107.4 87.2 66.3 53.8 51.0 47.7 45.1 43.1 41.4
22222 40000
3 15 ⁄ 16 , 4 125000 29727 24146 19613 14899 12102 11458 10716 10145 9687 9306
117.1 95.1 77.3 58.7 47.7 45.1 42.2 40.0 38.2 36.7
60000
26323 21381 17367 13193 10716 10145 9488 8983 8577 8241
100.5 81.6 66.3 50.3 40.9 38.7 36.2 34.3 32.7 31.4
100000
22583 18343 14899 11318 9193 8704 8140 7707 7359 7070
50 100 200 500 1000 1200 1500(1) 1800(1) 2100(1) 2400(1)
232.5 188.8 153.4 116.5 94.6 89.6 83.8 79.3 75.8 72.8
10000
52268 42455 34484 26196 21278 20145 18841 17838 17032 16363
167.2 135.8 110.3 83.8 68.1 64.5 60.3 57.1 54.5 52.4
30000
37592 30534 24802 18841 15303 14489 13551 12829 12250 11769
110 647 153.4 124.6 101.2 76.9 62.4 59.1 55.3 52.4 50.0 48.0
22224 40000
4 3 ⁄ 16 , 4 1 ⁄ 4 145000 34484 28010 22751 17283 14038 13291 12430 11769 11237 10796
135.8 110.3 89.6 68.1 55.3 52.4 49.0 46.4 44.3 42.5
60000
30534 24802 20145 15303 12430 11769 11007 10421 9950 9559
116.5 94.6 76.9 58.4 47.4 44.9 42.0 39.8 38.0 36.5
100000
26196 21278 17283 13129 10664 10097 9443 8940 8536 8201
50 100 200 500 1000 1200(1) 1500(1) 1800(1) 2100(1)
272.6 221.4 179.8 136.6 111.0 105.1 98.3 93.0 88.8
10000
61279 49774 40429 30712 24946 23618 22089 20913 19968
196.1 159.2 129.3 98.3 79.8 75.6 70.7 66.9 63.9
30000
44074 35799 29078 22089 17942 16987 15887 15041 14362
115 757 179.8 146.1 118.6 90.1 73.2 69.3 64.8 61.4 58.6
22226 40000
4 7 ⁄ 16 , 4 1 ⁄ 2 170000 40429 32839 26673 20263 16458 15582 14573 13798 13174
159.2 129.3 105.1 79.8 64.8 61.4 57.4 54.3 51.9
60000
35799 29078 23618 17942 14573 13798 12904 12217 11665
136.6 111.0 90.1 68.5 55.6 52.7 49.2 46.6 44.5
100000
30712 24946 20263 15393 12503 11837 11071 10482 10008
50 100 200 500 1000(1) 1200(1) 1500(1) 1800(1)
311.1 252.7 205.2 155.9 126.6 119.9 112.1 106.2
10000
69931 56801 46137 35048 28468 26953 25208 23866
223.7 181.7 147.6 112.1 91.1 86.2 80.6 76.4
30000
50296 40853 33183 25208 20475 19385 18130 17165
125 863 205.2 166.7 135.4 102.9 83.5 79.1 74.0 70.0
22228 40000
4 15 ⁄ 16 , 5 194000 46137 37475 30439 23123 18782 17782 16631 15746
181.7 147.6 119.9 91.1 74.0 70.0 65.5 62.0
60000
40853 33183 26953 20475 16631 15746 14726 13942
155.9 126.6 102.9 78.1 63.5 60.1 56.2 53.2
100000
35048 28468 23123 17566 14268 13508 12634 11961
(1)
(2)

Housing Loads
Because solid-block housed unit bearings are made of cast steel,
they are built to last with high allowable load in multiple orientations.
Refer to tables below for allowable housing loads.
Fig. C-15. Allowable housing loads.
TABLE C-9. Housing Capacity Chart (222XX SERIES)

Static Timken Housing Timken Housing Timken Housing Timken Housing
Bearing No. Fs Ratio 1:5
Capacity Factor 180 Capacity 180 Factor 150 Capacity 150 Factor 120 Capacity 120 Factor 90 Capacity 90
kN kN kN kN kN
lbs. lbs. lbs. lbs. lbs.
99.7 20 17 20 34
22208 0.20 1 0.86 1 1.73
22400 4480 3850 4480 7750
108 22 18 22 37
22209 0.20 1 0.86 1 1.73
24200 4840 4160 4840 8370
118 24 20 24 41
22210 0.20 1 0.86 1 1.73
26600 5320 4570 5320 9200
142 28 24 28 49
22211 0.20 1 0.86 1 1.73
31900 6380 5490 6380 11040
174 35 30 35 60
22212 0.20 1 0.86 1 1.73
39000 7800 6710 7800 13490
216 43 37 43 75
22213 0.20 1 0.86 1 1.73
48600 9720 8360 9720 16820
231 46 40 46 800
22214 0.20 1 0.86 1 1.73
52000 10400 8940 10400 179990
240 48 41 48 83
22215 0.20 1 0.86 1 1.73
54100 10820 9310 10820 18720
278 56 48 56 96
22216 0.20 1 0.86 1 1.73
62500 12500 10750 12500 21630
320 64 55 64 111
22217 0.20 1 0.86 1 1.73
71900 14380 12370 14380 24880
388 78 67 78 134
22218 0.20 1 0.86 1 1.73
87200 17440 15000 17440 30170
441 88 76 88 152
22219 0.20 1 0.86 1 1.73
99000 19800 17030 19800 34250
502 100 86 100 174
22220 0.20 1 0.86 1 1.73
113000 22600 19440 22600 39100
653 131 112 131 226
22222 0.20 1 0.86 1 1.73
147000 29400 25290 29400 50860
772 155 133 155 268
22224 0.20 1 0.86 1 1.73
174000 34800 29930 34800 60200
945 188 162 188 326
22226 0.20 1 0.86 1 1.73
212000 42400 36460 42400 73350
1060 211 181 211 364
22228 0.20 1 0.86 1 1.73
237000 47400 40760 47400 82000
TABLE C-10. Housing Capacity Chart (232XX SERIES)

Static Timken Housing Timken Housing Timken Housing Timken Housing
Bearing Fs Ratio 1:5
Capacity Factor 180 Capacity 180 Factor 150 Capacity 150 Factor 120 Capacity 120 Factor 90 Capacity 90
kN kN kN kN kN
lbs. lbs. lbs. lbs. lbs.
1660 281 242 281 486
23230 0.17 1 0.86 1 1.73
372000 63240 54390 63240 109400
2200 373 321 373 646
23234 0.17 1 0.86 1 1.73
494000 83980 72220 83980 145290

Engineering • Normal Speed Ratings for Seals
Normal Speed Ratings for Seals

TABLE C-11. v-LOCK SErIES NOrMAL SEAL SPEED rATINGS (rPM)
Oil Lubrication Grease Lubrication
Shaft Dia. Bearing No.
M/N Seal(1) T Seal B/C/O Seal(1) M/N Seal(1) T Seal B/C/O Seal(1)
mm
in.
50
22211 2200 3800 1800 2200 3200 1600
1 15 ⁄ 16 , 2
55 22212 2000 3500 1650 2000 3000 1550
2 3 ⁄ 16 , 2 1 ⁄ 4 22213 1800 3200 1500 1800 2800 1500
60, 65 22214 1700 3050 1400 1700 2600 1400
2 7 ⁄ 16 , 2 1 ⁄ 2 22215 1600 2900 1300 1600 2400 1300
70, 75
22216 1500 2650 1200 1500 2200 1150
2 11 ⁄ 16 , 2 3 ⁄ 4
22217 1400 2400 1100 1400 2000 1100
2 15 ⁄ 16 , 3
80, 85, 90
22219 1300 2200 1000 1300 1800 950
3 3 ⁄ 16 , 3 1 ⁄ 4
22220 1200 2000 900 1200 1600 900
3 7 ⁄ 16 , 3 1 ⁄ 2
100
3 11 ⁄ 16 , 3 3 ⁄ 4 22222 900 1700 600 900 1200 600
3 15 ⁄ 16 , 4
110, 115 22224
700 1500 400 700 1000 400
4 7 ⁄ 16 , 4 1 ⁄ 2 22226
125, 130
22228 650 1200 350 650 900 350
4 15 ⁄ 16 , 5
(1)
Bearings with contact seals will have higher operating temperatures than bearings with labyrinth seals.
TABLE C-12. CL SErIES NOrMAL SEAL SPEED rATINGS (rPM)

Oil Lubrication Grease Lubrication
Shaft Dia. Bearing No.
M/N Seal (1)
T Seal B/C/O Seal (1)
M/N Seal (1)
T Seal B/C/O Seal(1)
mm
in.
35
22208 2700 4500 1950 2700 4000 1950
1 7 ⁄ 16 , 1 1 ⁄ 2
40, 45
22209 2700 4500 1950 2700 4000 1950
1 11 ⁄ 16 , 1 3 ⁄ 4
50
22210 2400 4200 1800 2400 3550 1800
1 15 ⁄ 16 , 2
55
22211 2200 3800 1600 2200 3200 1600
2 3 ⁄ 16 , 2 1 ⁄ 4
60, 65
22213 1800 3200 1500 1800 2800 1500
2 7 ⁄ 16 , 2 1 ⁄ 2
70, 75
2 11 ⁄ 16 , 2 3 ⁄ 4 22215 1600 2900 1300 1600 2400 1300
2 15 ⁄ 16 , 3
80, 85, 90
3 3 ⁄ 16 , 3 1 ⁄ 4 22218 1400 2400 1000 1400 2000 1000
3 7 ⁄ 16 , 3 1 ⁄ 2
100
22220 1200 2000 900 1200 1600 900
3 15 ⁄ 16 , 4
110, 115
22222 900 1700 600 900 1200 600
4 7 ⁄ 16 , 4 1 ⁄ 2
125, 130
22226 700 1500 400 700 1000 400
4 15 ⁄ 16 , 5
Bearings with contact seals will have higher operating temperatures than bearings with labyrinth seals.
(1)

TABLE C-13. EC SErIES NOrMAL SEAL SPEED rATINGS (rPM) TABLE C-14. TA/Dv SErIES NOrMAL SEAL SPEED rATINGS (rPM)
Oil Lubrication Grease Lubrication Oil Lubrication Grease Lubrication
Shaft Bearing Shaft Bearing
Dia. No. M/N B/C/O M/N B/C/O Dia. No. M/N B/C/O M/N B/C/O
Seal(1) T Seal Seal(1) Seal(1) T Seal Seal(1) Seal(1) T Seal Seal(1) Seal(1) T Seal Seal(1)
mm mm
in. in.
35 40
22208 2700 4500 1950 2700 4000 1950 22209 2700 4500 1950 2700 4000 1950
1 7 ⁄ 16 , 1 1 ⁄ 2 1 7 ⁄ 16 , 1 1 ⁄ 2
40, 45 45
22209 2700 4500 1950 2700 4000 1950 22210 2400 4200 1800 2400 3550 1800
1 11 ⁄ 16 , 1 3 ⁄ 4 1 11⁄ 16 , 1 3 ⁄ 4
50 50
22210 2400 4200 1800 2400 3550 1800 22211 2200 3800 1800 2200 3200 1600
1 15 ⁄ 16 , 2 1 15 ⁄ 16 , 2
55 55
22211 2200 3800 1600 2200 3200 1600 22212 2000 3500 1650 2000 3000 1550
2 3 ⁄ 16 , 2 1 ⁄ 4 –
60, 65 60
22213 1800 3200 1500 1800 2800 1500 22213 1800 3200 1500 1800 2800 1500
2 7 ⁄ 16 , 2 1 ⁄ 2 2 3 ⁄ 16 , 2 1 ⁄ 4
70, 75 65
2 11 ⁄ 16 , 2 3 ⁄ 4, 22215 1600 2900 1300 1600 2400 1300 22215 1600 2900 1300 1600 2400 1300
2 7 ⁄ 16 , 2 1 ⁄ 2
2 15 ⁄ 16 , 3
70
80, 85, 90 22216 1500 2650 1200 1500 2200 1150
2 11 ⁄ 16 , 2 3 ⁄ 4
3 3 ⁄ 16 , 3 1 ⁄ 4 22218 1400 2400 1000 1400 2000 1000
3 7 ⁄ 16 , 3 1 ⁄ 2
75
22217 1400 2400 1100 1400 2000 1100
2 15 ⁄ 16 , 3
100
3 11 ⁄ 16 , 3 3 ⁄ 4 22220 1200 2000 900 1200 1600 900
3 15 ⁄ 16 , 4 80
22218 1400 2400 1000 1400 2000 1000
3 3 ⁄ 16 , 3 1 ⁄ 4
110,115
22222 900 1700 600 900 1200 600 85
4 7 ⁄ 16 , 4 1 ⁄ 2 22219 1300 2200 1000 1300 1800 950
–
125, 130
22226 700 1500 400 700 1000 400 90
4 15 ⁄ 16 , 5 22220 1200 2000 900 1200 1600 900
3 7 ⁄ 16 , 3 1 ⁄ 2
140, 150
5 7 ⁄ 16 , 5 1 ⁄ 2 23230 650 950 350 600 800 350 100
22222 900 1700 600 900 1200 600
5 15 ⁄ 16 , 6 3 15 ⁄ 16 , 4
170, 180 110

6 7 ⁄ 16 , 6 1 ⁄ 2 23234 600 900 350 600 800 350 22224 800 1600 500 800 1100 500
4 3⁄ 16 , 4 1 ⁄ 4
6 15 ⁄ 16 , 7
115
Bearings with contact seals will have higher operating temperatures than
(1) 22226 700 1500 400 700 1000 400
4 7 ⁄ 16 , 4 1 ⁄ 2
bearings with labyrinth seals.
125
22228 650 1200 350 650 900 350
4 15 ⁄ 16 , 5
(1)
Bearings with contact seals will have higher operating temperatures than
bearings with labyrinth seals.

°C (°F)
260 C
(500 F)
260 (500)
204 C
(400 F)
204 (400)
149 (300)
127 C
(260 F)
93 C
(200 F)
93 (200)
38 (100)
0 (32)
-18 (0)
-34 C
-40 C (-30 F)
-46 C (-40 F)
(-50 F)
-73 (-100)
-73 C
(-100 F)
Nitrile Rubber Polyurethane DuPont™ Viton® DuPont™ Teflon®

(M, B) (O) (N, C) (T)
Fig. C-16. Seal temperature ratings based on analytics.
55
50
30
10
10 9
5
5
DuPontTM is a trademark of E.I. du Pont de

Nemours and Company. Nitrile Rubber DuPont DuPont Polyurethane
Teflon® is a registered trademark of E.I. du (M, B) Viton Teflon (O)
Pont de Nemours and Company. (N, C) (T)
Viton® is a registered trademark of E.I. du
Pont de Nemours and Company. Fig. C-17. Relative abrasion resistance ratings.

Engineering • Seal Material Chemical Compatibility
Seal Material Chemical Compatibility

A - Little to no effect A - Little to no effect
B - Minor to moderate effect Nitrile DuPont™ DuPont™ B - Minor to moderate effect Nitrile DuPont™ DuPont™
Urethane Urethane
C - Severe effect to destruction rubber Viton® Teflon® C - Severe effect to destruction rubber Viton® Teflon®
N - No data – test prior to use. N - No data – test prior to use.
Acetaldehyde C C C A Bleach Solutions N C A B
Acetamide N A B A Boric Acid A A A A
Acetic Acid C B B A Brake Fluid N C C N
Acetic Anhydride C C C A Bromine B C A C
Acetone C C C A Bunker Oil A A A A
Acetyl Bromide C N N N Butane A A A A
Acetyl Chloride C C A A Butyl Acetate C C C A
Acetylene C A A A Butyl Alcohol B A A A
Adipic Acid A A N A Calcium Carbonate B A A A
Aero Shell Grease B A-B A A Calcium Chloride A A A A
Aero Lubriplate A A A A Calcium Hydroxide A A A A
Aero Safe 2300 N C C A Calcium Nitrate B A A A
Aerozine 50 N C C A Calcium Sulfate B B B A
Aluminum Acetate N A C A Carbon Dioxide A A A A
Aluminum Bromide N A A A Carbon Disulfide B C A A
Aluminum Chloride B A A A Carbon Monoxide A A A A
Aluminum Sulfate B A A A Carbon Tetrachloride C C A A
Ammonia B B C A Chlorine N C A B
Ammonium Carbonate B C N A Chloroacetic Acid C C C N
Ammonium Chloride N A A A Chloroform C N N B
Ammonium Hydroxide B C A A Chromic Acid C C A B
Ammonium Nitrate B A N A Chromium Potassium Sulfate A N N N
Ammonium Persulfate B C N A Citric Acid B A A A
Ammonium Sulfate B A C A Corn Oil A A A A
Ammonium Sulfide B A C A Cottonseed Oil A A A A
Ammonium Thiocyanate B N N A Cresol C C A A
Ammonium Acetate C N N A Crude Oil B B A A
Amyl Acetate C C C A Cupric Chloride A B B A
Amyl Alcohol C B C A Cupric Nitrate B N N A
Aniline C C C A Cupric Sulfate B B B A
Aniline Hydrochloride C B B B Cutting Oil B A A A
Animal Fats and Oils B A A A Cyclohexane B A A A
Antimony Salts B N N A Cyclohexanone C C A A
Aqua Regia C C B A Dibutyl Phthalate C C C B
Arsenic Salts B N N A Dichlorobenzene C N N B
ASTM Oil #1 A A A A Diesel Fuel B A A A
ASTM Oil #2 B A A A Diester Oil B B A A
ASTM Oil #3 B A A A Dimethyl Acetamide C N N A
ASTM Reference Fuel A A A A A Dimethyl Formamide C B C A
ASTM Reference Fuel B B B A A Dodecyl Mercaptan B N N N
Atlantic Oil A A A A DTE Oil B A N N
Barium Carbonate B A A A Dubutyl Ether B C C N
Barium Hydroxide A A A A EP Lubes A A A A
Beer A A A A Esso #90 Lube Oil A A A A
Benzaldehyde B C C A Ether B N N A
Benzene C C B A Ethyl Acetate C C C A
Benzoic Acid B C A A Ethyl Alcohol (Ethanol) C A C A
Black Sulphate Liquors N B A A Formic Acid C B C A
Teflon® is a registered trademark of E.I. du Pont de Nemours and Company. Continued on next page.
Viton® is a registered trademark of E.I. du Pont de Nemours and Company.
DISCLAIMER: Every reasonable effort has been made to ensure the accuracy of the information in this writing,
but no liability is accepted for errors, omissions or for any other reason.

Engineering • Seal Material Chemical Compatibility
A - Little to no effect A - Little to no effect

B - Minor to moderate effect Nitrile DuPont™ DuPont™ B - Minor to moderate effect Nitrile DuPont™ DuPont™
Urethane Urethane
C - Severe effect to destruction rubber Viton® Teflon® C - Severe effect to destruction rubber Viton® Teflon®
N - No data – test prior to use. N - No data – test prior to use.
Freon, 12 or 113 A A B A Palmitic Acid A A A A
Fuel Oil B A A A Paint Thinner B C B A
Gasoline B B A A Peanut Oil A A A A
Glucose A A A A Perchloric Acid C C A A
Glue N A A A Perchloroethylene C B A A
Glycerin A A A A Petroleum B A A A
Heptane A N N A Phenol (Carbolic Acid) C C A A
Hexane A A A A Phosphoric Acid C C A A
Hydrazine C B C B Potassium Cyanide A A A A
Hydrobromic Acid B C A A Potassium Salts B A A A
Hydrocarbon Oil A A A A Propane B A A A
Hydrochloric Acid B C B A Propyl Alcohol B A A A
Hydrofluoric Acid B C C A Propylene Glycol B N N A
Hydrogen A A A A Pydraul Oil C C A A
Hydrogen Peroxide B C A B SAE #10 Oil A A A A
Hydrogen Sulfide C C C A Seawater A A A A
Hydrologic Acid B N N N Silicic Acid B N N A
Iodine A B A A Silver Nitrate B B A A
Isobutyl Alcohol N B A A Skydrol Oil C C C A
Isopropyl Chloride N C A A Soap B A A A
Isopropyl Ether B B C N Sodium Acetate A B C A
Isopropyl Alcohol (Propanol) B A A N Sodium Bicarbonate B A A A
JP4 Oil B A A A Sodium Borate B A A A
JP5 and 6 Oil C A A A Sodium Carbonate B A A A
Kerosene B A A A Sodium Chloride B A A A
Lactic Acid B B A A Sodium Cyanide B A A A
Lead Acetate B B C A Sodium Hydrosulfite B N N A
Linseed Oil B A A A Sodium Hydroxide B B B A
Liquefied Petroleum Gas A A A N Sodium Hypochlorite C B A A
Lubrication Oil B A A A Sodium Nitrate B B N A
Lye N B B A Sodium Silicate A A A A
Magnesium Chloride N A A A Sodium Sulfate B A A A
Magnesium Hydroxide A B A A Sodium Sulfide B A A A
Magnesium Salts B A A A Steam C C C A
Maleic Acid C C A A Styrene B C B A
Mercury B A A A Sulfur Dioxide B C A A
Methyl Alcohol (Methanol) A C A N Sulfuric Acid C C A A
Methyl Ethyl Ketone C C C A Tannic Acid A A A A
Methylene Chloride C C B A Tartaric Acid A A A A
MIL-D-5606 Oil C A A A Toluene C N N A
MIL-L7808 Oil B B A A Transformer Oil B N N A
Mineral Oil A A A A Turpentine C A A A
Mineral Spirits N B A A Urea B N N A
Naphthalene B C A A Varnish B B A A
Natural Gas B A A A Water B A A A
Nickel Salts C A A A
Oxygen A B A A
Ozone A C A A
Viton® is a registered trademark of E.I. du Pont de Nemours and Company.

Engineering • Internal Radial Clearances
Internal Radial Clearances

TABLE C-15. v-LOCK SErIES (TAPErED BOrE, C3) TABLE C-16. CL SErIES (STrAIGHT BOrE, C NOrMAL)
Clearance Clearance
Shaft Dia. Bearing No. Shaft Dia. Bearing No.
Min. Max. Min. Max.
mm mm mm mm mm mm
in. in. in. in. in. in.
50 0.075 0.095 35 0.030 0.045

22211 22208
1 15 ⁄ 16 , 2 0.003 0.0037 1 7 ⁄ 16 , 1 1 ⁄ 2 0.0012 0.0018
55 0.075 0.095 40, 45 0.035 0.055

22212 22209
2 3 ⁄ 16 , 2 1 ⁄ 4 0.003 0.0037 1 11 ⁄ 16 , 1 3 ⁄ 4 0.0014 0.0022
55 0.075 0.095 50 0.040 0.065

22213 22210
2 3 ⁄ 16 , 2 1 ⁄ 4 0.003 0.0037 1 15 ⁄ 16 , 2 0.0016 0.0026
60, 65 0.075 0.095 55 0.040 0.065

22214 22211
2 7 ⁄ 16 , 2 1 ⁄ 2 0.003 0.0037 2 3 ⁄ 16 , 2 1 ⁄ 4 0.0016 0.0026
60, 65 0.075 0.095 60, 65 0.040 0.065

22215 22213
2 7 ⁄ 16 , 2 1 ⁄ 2 0.003 0.0037 2 7 ⁄ 16 , 2 1 ⁄ 2 0.0016 0.0026
70, 75 70, 75
0.095 0.120 0.050 0.080
2 11 ⁄ 16 , 2 3 ⁄ 4, 22216 2 11 ⁄ 16 , 2 3 ⁄ 4, 22215
0.0037 0.0047 0.002 0.0031
2 15 ⁄ 16 , 3 2 15 ⁄ 16 , 3
70, 75 80, 85, 90

0.095 0.120 0.060 0.100
2 11 ⁄ 16 , 2 3 ⁄ 4, 22217 3 3 ⁄ 16 , 3 1 ⁄ 4, 22218
0.0037 0.0047 0.0024 0.0039
2 15 ⁄ 16 , 3 3 7 ⁄ 16 , 3 1 ⁄ 2
80, 85, 90
0.110 0.140 100 0.075 0.120
3 3 ⁄ 16 , 3 1 ⁄ 4, 22219 22220
0.0043 0.0055 3 15 ⁄ 16 , 4 0.003 0.0047
3 7 ⁄ 16 , 3 1 ⁄ 2
80, 85, 90
0.110 0.140 110, 115 0.075 0.120
3 3 ⁄ 16 , 3 1 ⁄ 4, 22220 22222
0.0043 0.0055 4 7 ⁄ 16 , 4 1 ⁄ 2 0.003 0.0047
3 7 ⁄ 16 , 3 1 ⁄ 2
100
0.135 0.170 125, 130 0.095 0.145
3 11 ⁄ 16 , 3 3 ⁄ 4, 22222 22226
0.0053 0.0067 4 15 ⁄ 16 , 5 0.0037 0.0057
3 15 ⁄ 16 , 4
110 0.135 0.170

22224
– 0.0053 0.0067
110, 115 0.135 0.170

22226
4 7 ⁄ 16 , 4 1 ⁄ 2 0.0053 0.0067
125, 130 0.160 0.200

22228
4 15 ⁄ 16 , 5 0.0063 0.0079

Engineering • Internal Radial Clearances
TABLE C-17. EC SErIES (STrAIGHT BOrE, C NOrMAL)

Clearance Clearance
Shaft Dia. Bearing No. Shaft Dia. Bearing No.
Min. Max. Min. Max.
mm mm mm mm mm mm
in. in. in. in. in. in.
80, 85, 90
35 0.030 0.045 0.060 0.100
7 ⁄ 16 ,
22208 3 3 ⁄ 16 , 3 1 ⁄ 4 22218
1 1 1⁄2 0.0012 0.0018 0.0024 0.0039
3 7 ⁄ 16 , 3 1 ⁄ 2
100
40, 45 0.0350 0.055 0.075 0.120
11 ⁄ 16 ,
22209 3 11 ⁄ 16 , 3 3 ⁄ 4 22220
1 1 3⁄4 0.0014 0.0022 0.003 0.0047
3 15 ⁄ 16 , 4
50 0.040 0.065 110, 115 0.075 0.120

22210 22222
1 15 ⁄ 16 , 2 0.0016 0.0026 4 7 ⁄ 16 , 4 1 ⁄ 2 0.003 0.0047
55 0.040 0.065 125, 130 0.095 0.145

22211 22226
2 3 ⁄ 16 , 2 1 ⁄ 4 0.0016 0.0026 4 15 ⁄ 16 , 5 0.0037 0.0057
140, 150
60, 65 0.040 0.065 0.110 0.170
22213 5 7 ⁄ 16 , 5 1 ⁄ 2 23230
2 7 ⁄ 16 , 2 1 ⁄ 2 0.0016 0.0026 0.0043 0.0067
5 15 ⁄ 16 , 6
70, 75 170, 180
0.050 0.080 0.120 0.180
2 11 ⁄ 16 , 2 3 ⁄ 4 22215 6 7 ⁄ 16 , 6 1 ⁄ 2, 23234
0.002 0.0031 0.0047 0.0071
2 15 ⁄ 16 , 3 6 15 ⁄ 16 , 7
TABLE C-18. TA/Dv SErIES (TAPErED BOrE, C3)

Recommended Reduction Of Recommended Axial Movement
Clearance Prior To Installation
Shaft Dia. Bearing No. Internal Radial Clearance Of Adapter Sleeve Minimum Internal
Min. Max. Min. Max. Min. Max.
mm mm mm mm mm mm mm mm
in. in. in. in. in. in. in. in.
40 0.061 0.079 0.025 0.030 0.381 0.457 0.030
22209
1 7 ⁄ 16 , 1 1 ⁄ 2 0.0024 0.0031 0.0010 0.0012 0.015 0.018 0.0012
45 0.061 0.079 0.025 0.030 0.381 0.457 0.030
22210
1 11 ⁄ 16 , 1 3 ⁄ 4 0.0024 0.0031 0.0010 0.0012 0.015 0.018 0.0012
50 0.076 0.094 0.030 0.038 0.457 0.559 0.038
22211
1 15 ⁄ 16 , 2 0.0030 0.0037 0.0012 0.0015 0.018 0.022 0.0015
55 0.076 0.094 0.030 0.038 0.457 0.559 0.038
22212
– 0.0030 0.0037 0.0012 0.0015 0.018 0.022 0.0015
60 0.076 0.094 0.030 0.038 0.457 0.559 0.038
22213
2 3 ⁄ 16 , 2 1 ⁄ 4 0.0030 0.0037 0.0012 0.0015 0.018 0.022 0.0015
65 0.094 0.119 0.038 0.051 0.559 0.762 0.043
22215
2 7 ⁄ 16 , 2 1 ⁄ 2 0.0037 0.0047 0.0015 0.0020 0.022 0.030 0.0017
70 0.094 0.119 0.038 0.051 0.559 0.762 0.043
22216
2 11 ⁄ 16 , 2 3 ⁄ 4 0.0037 0.0047 0.0015 0.0020 0.022 0.030 0.0017
75 0.109 0.140 0.046 0.064 0.686 0.965 0.051
22217
2 15 ⁄ 16 , 3 0.0043 0.0055 0.0018 0.0025 0.027 0.038 0.0020
80 0.109 0.140 0.046 0.064 0.686 0.965 0.051
22218
3 3 ⁄ 16 , 3 1 ⁄ 4 0.0043 0.0055 0.0018 0.0025 0.027 0.038 0.0020
85 0.109 0.140 0.046 0.064 0.686 0.965 0.051
22219
– 0.0043 0.0055 0.0018 0.0025 0.027 0.038 0.0020
90 0.109 0.140 0.046 0.064 0.686 0.965 0.051
22220
3 7 ⁄ 16 , 3 1 ⁄ 2 0.0043 0.0055 0.0018 0.0025 0.027 0.038 0.0020
100 0.135 0.170 0.051 0.071 0.762 1.067 0.064
22222
3 15 ⁄ 16 , 4 0.0053 0.0067 0.0020 0.0028 0.030 0.042 0.0025
110 0.135 0.170 0.051 0.071 0.762 1.067 0.064
22224
4 3 ⁄ 16 , 4 1 ⁄ 4 0.0053 0.0067 0.0020 0.0028 0.030 0.042 0.0025
115 0.160 0.201 0.064 0.089 0.889 1.270 0.076
22226
4 7 ⁄ 16 , 4 1 ⁄ 2 0.0063 0.0079 0.0025 0.0035 0.035 0.050 0.0030
125 0.160 0.201 0.064 0.089 0.889 1.270 0.076
22228
4 15 ⁄ 16 , 5 0.0063 0.0079 0.0025 0.0035 0.035 0.050 0.0030

Engineering • Shafting
Shafting
When installing and using housed unit bearings, all shafting framework will be minimal. In these conditions, fixed bearings
should be straight, clean, free from burrs and within the can be used on both ends of the shaft. However, if there is a
recommended shaft tolerances in tables C-19 and C-20 below. difference in material between the shaft and the framework, or
For applications that involve high speed or extreme vibration if the application involves different temperatures from the shaft
conditions, we recommend that all shafting be machined to one- to the frame, then only one fixed bearing should be used on each
half the recommended tolerances below. shaft. All other bearings on the same shaft should be converted
to floating to accommodate thermal expansion of the shaft.
Shaft Expansion
Steel expands or contracts 0.0000113 millimeter per millimeter
for each degree Celsius (0.0000063 inch per inch for each degree
Fahrenheit) relative temperature increase or decrease respectively.
Expansion bearings are used to accommodate thermal expansion
of steel. Where the shafting and the framework on which the
bearings and shafting are mounted are made from steel, the
relative difference in expansion between the shaft and the
TABLE C-19. v-LOCK, CL AND EC SErIES –

rECOMMENDED SHAFT TOLErANCES TABLE C-20. TA/Dv SErIES – rECOMMENDED SHAFT TOLErANCES
Shaft Dia. Shaft Tolerance Shaft Dia. Shaft Tolerance
mm mm mm mm
in. in. in. in.
35 +0.00/-0.025 40 +0.00/-0.025
1 7 ⁄ 16 , 1 1 ⁄ 2 +0.00/-0.0010 1 7 ⁄ 16 , 1 1 ⁄ 2 +0.00/-0.0010
40, 45 +0.00/-0.038 45 +0.00/-0.051
1 11 ⁄ 16 , 1 3 ⁄ 4 + 0.00/-0.0015 1 11 ⁄ 16 , 1 3 ⁄ 4 +0.00/-0.0020
50 +0.00/-0.038 50 +0.00/-0.076
1 15 ⁄ 16 , 2 + 0.00/-0.0015 1 15 ⁄ 16 , 2 + 0.00/-0.0030
55 +0.00/-0.038 55 +0.00/-0.076
2 3 ⁄ 16 , 2 1 ⁄ 4 + 0.00/-0.0015 – –
60, 65 +0.00/-0.038 60 +0.00/-0.076
2 7 ⁄ 16 , 2 1 ⁄ 2 + 0.00/-0.0015 2 3 ⁄ 16 , 2 1 ⁄ 4 + 0.00/-0.0030
70, 75 +0.00/-0.051 65 +0.00/-0.089
2 11 ⁄ 16 , 2 3 ⁄ 4, 2 15 ⁄ 16 , 3 + 0.00/-0.0020 2 7 ⁄ 16 , 2 1 ⁄ 2 + 0.00/-0.0035
80, 85, 90 +0.00/-0.076 70 +0.00/-0.102
3 3 ⁄ 16 , 3 1 ⁄ 4, 3 7 ⁄ 16 , 3 1 ⁄ 2 + 0.00/-0.0030 2 11 ⁄ 16 , 2 3 ⁄ 4 + 0.00/-0.0040
100 +0.00/-0.076 75 +0.00/-0.102
3 11 ⁄ 16 , 3 3 ⁄ 4, 3 15 ⁄ 16 , 4 + 0.00/-0.0030 2 15 ⁄ 16 , 3 + 0.00/-0.0040
110, 115 +0.00/-0.127 80 +0.00/-0.102
4 7 ⁄ 16 , 4 1 ⁄ 2 + 0.00/-0.0050 3 3 ⁄ 16 , 3 1 ⁄ 4 + 0.00/-0.0040
125, 130 +0.00/-0.127 85 +0.00/-0.102
4 15 ⁄ 16 , 5 + 0.00/-0.0050 – –
140, 150 +0.00/-0.127 90 +0.00/-0.102
5 7 ⁄ 16 , 5 1 ⁄ 2, 5 15 ⁄ 16 , 6 + 0.00/-0.0050 3 7 ⁄ 16 , 3 1 ⁄ 2 + 0.00/-0.0040
170, 180 +0.00/-0.127 100 +0.00/-0.102
6 7 ⁄ 16 , 6 1 ⁄ 2, 6 15 ⁄ 16 , 7 + 0.00/-0.0050 3 15 ⁄ 16 , 4 + 0.00/-0.0040
110 +0.00/-0.102
4 3 ⁄ 16 , 4 1 ⁄ 4 + 0.00/-0.0040
115 +0.00/-0.102
4 7 ⁄ 16 , 4 1 ⁄ 2 + 0.00/-0.0040
125 +0.00/-0.127
4 15 ⁄ 16 , 5 + 0.00/-0.0050

Engineering • SHAFTING • MISALIGNMENT • LUBRICATION
TABLE C-21. Amount of Float Per One Rotation

of External Housing NuT
Bearing
Float
Bearing
Float
Bearing
Float Conversion from Fixed
Number Number Number
mm mm mm
to Floating
in. in. in. Housed unit bearings are easily converted from fixed to floating
1.270 2.108 2.108
22208 22215 22224 in the field (see the appropriate installation guide in this catalog
0.050 0.083 0.083
1.270 2.108 2.108 for instructions). The following table will help you determine
22209 22216 22226
0.050 0.083 0.083 the amount of float for each bearing based on the number of
1.270 2.108 2.108 revolutions the external housing nut is backed out.
22210 22217 22228
0.050 0.083 0.083
1.270 2.108 2.108
22211 22218 23230
0.050 0.083 0.083
1.270 2.108 2.108
22212 22219 23234
0.050 0.083 0.083
2.108 2.108
22213 22220 – –
0.083 0.083
2.108 2.108
22214 22222 – –
0.083 0.083
Misalignment Table C-22. Misalignment scale at ±1.5 degrees

All spherical roller bearing housed units utilize self-aligning A B
double-row spherical roller bearings. Because of this, the m mm
in. in.
housed unit can accept up to ±1.5 degrees of misalignment. The
0.305 15.951
performance life of our housed unit is not reduced while under 1 0.628
misalignment conditions within these guidelines. It will accept 1.524 79.756
both radial and thrust loads under static, oscillatory or dynamic 5 3.140
load conditions.
A
Fig. C-18. Misalignment.

Lubrication
Timken is dedicated to using the highest quality components in European REACH Compliance
everything we do. This is why we use premium industrial grease
Timken lubricants, greases and similar products sold in stand-
in spherical roller bearing solid-block housed units. The lithium-
alone containers or delivery systems are subject to the European
complex extreme-pressure grease combines the benefits of wide
REACH (Registration, Evaluation, Authorization and Restriction
operating temperatures and broad compatibility. This grease offers
of CHemicals) directive. For import into the European Union,
excellent thermal stability through temperatures ranging from -34°
Timken can sell and provide only those lubricants and greases
C to 177° C (-30° F to 350° F). When dealing with temperatures
that are registered with ECHA (European CHemical Agency). For
above 149° C (300° F), consult your Timken engineer for optional
further information, please contact your Timken engineer.
grease recommendations. Application-specific lubrication
options are also available ranging from Timken Food Safe Grease
(aluminum-complex) to Timken Mill grease (calcium-sulfonate)
along with many others.

Engineering • Installation Guides • V-Lock® SERIES
Installation Guides
V-Lock® Series
Timken® solid-block housed unit V-Lock® bearings are easy to • Slide the housed unit into place over the sleeve.
install and remove because of their unique adapters.
• Loosely install the housed unit mounting bolts. Check the
Please complete the following steps to install and/or remove housed unit alignment. Verify that the mounting surfaces
Timken steel housed unit V-Lock bearings. are in the same flat plane to help achieve good alignment.
(Refer to fig. C-19.) If shimming is required to minimize misalignment, use full
shims across the entire housing base where possible (fig.
• Ensure that the shaft is clean, free from nicks and burrs, C-20). Washers should be properly sized to bolt diameter
straight and of proper diameter. See table C-24 for
and should not be an SAE grade, which is smaller.
recommended shaft tolerances. The housed unit should not
be mounted on a worn section of the shaft. Using shafts • Seat the sleeve as best as possible into the mounted unit.
with hardness greater than HRC 45 will reduce the
effectiveness of locking devices.
• Tighten the wedge assembly by turning the wedge nut
clockwise until tight. Please note that it is designed to
• If using an open-end cover, slide the open-end cover/seal prevent overtightening.
combination into position on the shaft.
• If installing a double-nut housed unit, tighten the sleeve
• Remove the wedge assembly from the sleeve by assembly by turning the sleeve nut clockwise until snug.
unscrewing the wedge nut. See fig. C-19.
• Tighten both the wedge nut and sleeve nut set screws
• Clean oil off of the sleeve and wedge. alternately according to fig. C-19.
• Apply a thin oil film to the shaft only. • Install the housed unit mounting bolts. Check the housed
unit alignment. Verify that the mounting surfaces are in the
• For QV single-nut housed units:
same flat plane to achieve good alignment. If shimming is
• Slide the sleeve, non-threaded end first, into position required to minimize misalignment, use full shims across
on the shaft. the entire housing base where possible (fig. C-20). The
• For QVV double-nut housed units: bolts then need to be alternately torqued securely to their
mounting supports.
• Make sure the sleeve nut is flush with the end of the
sleeve. • Tighten the housing mounting bolts.
• Slide the sleeve/nut assembly, nut end first, into
position on the shaft.
WEDGE NUT
WEDGE NUT
WEDGE
WEDGE
HOUSING
HOUSING
INSERT
SLEEVE
INSERT
SLEEVE NUT
* ONLY SUPPLIED
SLEEVE WITH DOUBLE-NUT
SET SCREWS
SET SCREWS UNITS
Set screws
Single-Nut QV Double-Nut QVV
Fig. C-19. V-Lock® insert components.

Engineering • Installation Guides • V-Lock SERIES
Table C-23. Set screw Torque Values Removal

Bearing Size Set Screw Size Torque
Nm
• Remove covers, if applicable, by removing cover hardware
in. - lbs. and disengaging the cover from the housed unit retaining nut.
SLV11 to SLV20 3⁄8 - 24 TPI
32.8
290
• Loosen the set screws on the wedge nut.
SLV22 7 ⁄ 16 - 20 TPI
47.5
420
• Turn the wedge nut counterclockwise to remove the wedge
70.1
from the locked position.
SLV24 to SLV28 1⁄2 - 20 TPI
620
• Completely remove the wedge/wedge nut assembly.
• For QV housed units:
• Remove the bearing and sleeve from the shaft.
• For QVV housed units:
If using covers:
• Loosen the set screws on the sleeve nut.
• Make sure the mating surface of the cover and retaining • Turn the sleeve nut clockwise to un-seat the sleeve.
nuts are clean and dry.
• Remove the bearing and sleeve/sleeve nut from
• Urethane cover: slightly roughen the mating surface
the shaft.
of the cover, place a 3 mm – 6 mm (1⁄8 in. – 1⁄4 in.) bead
of polyurethane adhesive sealant on the roughened
surface.
• Steel cover: place a 3 mm – 6 mm (1⁄8 in. – 1⁄4 in.) bead
of silicone adhesive sealant on the mating surface of
the cover.
• Align the cover mounting holes with the mounting holes on

the retaining housing nut (make sure that the grease fitting
on the cover is accessible when doing so). TABLE C-24. Recommended shaft tolerances
• Apply and tighten the cover mounting hardware. Shaft Dia. Bearing No. Tolerance
mm mm
in. in.
50
22211
1 15 ⁄ 16 , 2
WASHER 55 22212 +0.00/0.038
2 3 ⁄ 16 , 2 1 ⁄ 4 22213 +0.00/-0.0015
60, 65 22214
2 7 ⁄ 16 , 2 1 ⁄ 2 22215
70, 75 22216 +0.00/-0.051
2 11 ⁄ 16 , 2 3 ⁄ 4, 2 15 ⁄ 16 , 3 22217 +0.00/-0.0020
SHIM 80, 85, 90 22219 +0.00/-0.076

3 3 ⁄ 16 , 3 1 ⁄ 4, 3 7 ⁄ 16 , 3 1 ⁄ 2 22220 +0.00/-0.0030
100 +0.00/-0.076
22222
3 11 ⁄ 16 , 3 15 ⁄ 16 , 4 +0.00/-0.0030
WASHER
110, 115 22224
4 7 ⁄ 16 , 4 1 ⁄ 2 22226 +0.00/-0.127
125, 130 +0.00/-0.0050
22228
4 15 ⁄ 16 , 5
SHIM
Fig. C-20. Use washers and full shims.

How to Convert a SOLID-BLOCK housed How to Convert a SOLID-BLOCK housed

unit from Fixed to Expansion (floating) unit from Expansion (floating) to Fixed
Flange Cartridge and Flange Block Flange Cartridge and Flange Block
• Make a reference mark on the housing and retaining nut. • Loosen the Teflon-tipped set screw that locks the retaining
nut in place.
• Loosen the Teflon-tipped set screw that locks the retaining
nut in place. • Tighten the retaining nut by tapping it with a hammer and
punch, rotating the retaining nut clockwise until it’s tight. It
• Loosen the retaining nut by tapping it with a hammer and is not possible to overtighten the retaining nut.
punch, rotating the retaining nut counterclockwise one
complete revolution. • Tighten the Teflon-tipped set screw.
• Tighten the Teflon-tipped set screw. NOTE
When converting a solid-block housed unit bearing from fixed
Pillow Block to expansion, it is imperative that the unit that is going to be
converted is correctly oriented. Since the insert in a steel housed
• Decide the amount and direction of expansion that’s needed. unit flange bearing is held against either a shoulder or snap ring
If unidirectional expansion is required, follow the directions opposite the housing retaining nut, a flange bearing that has been
converted to expansion can only float in the direction of the retain-
outlined in the previous page for flange housed units on the
ing nut. Based on this, the retaining nut must be on the side of the
nut that is on the side you want the expansion. housing opposite the fixed bearing.
• If multi-directional expansion is required, follow the directions
outlined in the previous section for both nuts on flange Pillow Block
housed units.
• Follow the directions above for flange housed units on both
nuts on either side of the housing.
NOTE
WARNING When converting a solid-block housed unit from expansion to
fixed on a mounted bearing, the locking-collar set screws
Failure to observe the following warnings must be released to allow the insert to move both in the
could create a risk of death or serious injury. housing and on the shaft.
Proper maintenance and handling practices are critical. LUBRICATION

Always follow installation instructions and
maintain proper lubrication. This information is to aid in the proper lubrication of Timken
Overheated bearings can ignite explosive atmospheres. spherical roller bearing solid-block housed units for the majority
Special care must be taken to properly select, install, of applications.
maintain, and lubricate housed unit bearings that are used
in or near atmospheres that may contain explosive levels Housed units have been factory-prelubricated with an NLGI
of combustible gases or accumulations of dust such as No. 2 lithium-complex, extreme-pressure synthetic grease that
from grain, coal, or other combustible materials. Consult combines the benefits of wide operating temperatures and broad
maintenance instructions. compatibility with varied materials. This grease offers excellent
thermal stability through temperatures ranging from -40° C to
177° C (-40° F to 350° F). Housed units should be relubricated with
this grease or one that is compatible and made for roller bearings.
It is vital that the greases used are compatible. Please consult
with your Timken engineer for the grease specifications if the use
of a grease other than the grease mentioned above is needed.
Normal service is considered as operation in a clean, dry
environment at temperatures between -34° C to +82° C (-30° F
to +180° F). If service is beyond normal conditions due to speed,
temperature, or exposure to moisture, dirt or corrosive chemicals,

more frequent relubrication may be necessary. For extreme Relubrication

conditions or conditions in which special chemicals are used,
Adequate lubrication is an essential element to the housed unit
consult with your Timken engineer.
bearing life. Use table C-25 as a suggested initial point of reference.
After extended storage or periods when the housed unit is not in Relubrication frequency and quantity intervals are best determined
operation, fresh grease should be added. through experience for each application, based on types of service,
It’s important to have the right amount of lubrication, because it which may differ from the suggestions in the table.
affects the housed unit bearing operating temperature as well. When the housed unit is not in operation for an extended period
An inadequate amount of grease could lead to higher operating of time, grease should be added to prevent corrosion.
temperatures due to inadequate lubrication film thickness.
Table C-25 shows general lubrication suggested starting points
Excessive grease also will lead to higher operating temperatures
only. Please read the entire installation instructions prior to
due to grease churning, which can cause bearing overheating. It
using these tables. Applications should be regularly reviewed
is best to observe the bearing and its temperature and adjust the
and lubrication amounts and intervals modified as needed to
lubrication as needed. If necessary, use the purge valve or seals
ensure best results.
that purge to reduce the amount of grease.
NOTE
Please check with the manufacturer of your grease
delivery system for specific information.
TABLE C-25. Relubrication Intervals

Relubrication Interval (Hours of Service based on RPM and Temperature deg. F)
Shaft Bearing Initial Relubrication
100 RPM 250 RPM 500 RPM 1000 RPM 2000 RPM 3000 RPM
Diameter No. Weight Weight
<160° >160° <160° >160° <160° >160° <160° >160° <160° >160° <160° >160°
mm g g
in. oz. oz.
50 28.4 8.5
22211 1200 600 800 400 440 220 160 80 100 50 60 30
1 15 ⁄ 16 , 2 1 0.3
34.0 8.5
22212 1150 580 750 380 400 200 140 70 90 50 50 20
55 1.2 0.3
2 3 ⁄ 16 , 2 1 ⁄ 4 36.9 11.3
22213 1130 570 740 370 380 190 130 65 85 45 45 20
1.3 0.4
39.7 11.3
22214 1120 560 720 360 360 180 120 60 80 40 40 20
60, 65 1.4 0.4
2 7 ⁄ 16 , 2 1 ⁄ 2 56.7 14.2
22215 1080 540 700 350 350 175 110 55 70 35
2 0.5
76.5 19.9
70, 75 22216 1040 520 680 340 340 170 100 50 60 30
2.7 0.7
2 11 ⁄ 16 , 2 3 ⁄ 4
2 15 ⁄ 16 , 3 96.4 25.5
22217 1000 500 640 320 320 160 100 50 60 30
3.4 0.9
104.9 25.5
80, 85, 90 22219 960 480 600 300 300 150 80 40 40 20
3.7 0.9
3 3 ⁄ 16 , 3 1 ⁄ 4
3 7 ⁄ 16 , 3 1 ⁄ 2 184.3 45.4
22220 840 420 520 260 240 120 70 35 30 18
6.5 1.6
100
209.8 53.9
3 11 ⁄ 16 , 3 3 ⁄ 4 22222 680 340 440 220 200 100 60 30 20 16
7.4 1.9
3 15 ⁄ 16 , 4
260.8 68.0
22224 640 320 400 200 180 90 50 25
110, 115 9.2 2.4
4 7 ⁄ 16 , 4 1 ⁄ 2 300.5 76.5
22226 560 280 360 180 160 80
10.6 2.7
125, 130 396.9 99.2
22228 520 260 340 170 140 75
4 15 ⁄ 16 , 5 14 3.5

Engineering • Installation Guides • CL Series
CL Series TABLE C-26. Recommended shaft tolerances

Shaft Dia. Bearing No. Tolerance
Please complete the following steps to install Timken solid-block
housed unit CL Series bearings. mm mm
in. in.
• Ensure that the shaft is clean, free from nicks and burrs, 35
1 7 ⁄ 16 , 1 1 ⁄ 2
22208
+0.00/-0.025
+0.00/0.0010
straight and of proper diameter. See table C-26 for
40, 45 +0.00/-0.038
recommended shaft tolerances. The housed unit should 1 11 ⁄ 16 , 1 3 ⁄ 4
22209
+0.00/0.0015
not be mounted on a worn section of the shaft. Using 50 +0.00/-0.038
22210
shafts with hardness greater than HRC 45 will reduce the 1 15 ⁄ 16 , 2 +0.00/-0.0015
effectiveness of locking devices. 55
22211
+0.00/-0.038
2 3 ⁄ 16 , 2 1 ⁄ 4 +0.00/-0.0015
• If using an open-end cover, slide the open-end cover/seal 60, 65
22213
+0.00/-0.038
combination into position on the shaft. 2 7 ⁄ 16 , 2 1 ⁄ 2 +0.00/-0.0015
• Apply a thin oil film to the shaft and bearing bore. 70, 75
2 11 ⁄ 16 , 2 3 ⁄ 4 22215
+0.00/-0.51
+0.00/-0.0020
• Slide the housed unit into position on the shaft. 2 15 ⁄ 16 , 3
80, 85, 90
• Install the housed unit mounting bolts. Check the housed 3 3 ⁄ 16 , 3 1 ⁄ 4 22218
+0.00/-0.076
+0.00/-0.0030
unit alignment. Verify mounting surfaces are in the same 3 7 ⁄ 16 , 3 1 ⁄ 2
flat plane to help achieve good alignment. If shimming is 100
22220
+0.00/-0.076
3 15 ⁄ 16 , 4 +0.00/-0.0030
required to minimize misalignment, use full shims across
110, 115 +0.00/-0.127
the entire housing base where possible (fig. C-22). The 4 7 ⁄ 16 , 4 1 ⁄ 2
22222
+0.00/-0.0050
bolts then need to be alternately torqued securely to their 125, 130 +0.00/-0.127
22226
mounting supports. 4 15 ⁄ 16 , 5 +0.00/-0.0050
• Tighten set screws alternately as per table C-27. Set screws

in multiple units should be aligned to each other (fig. C-21).
If using covers:
• Make sure the mating surface of the cover and retaining

of the cover, place a 3 mm – 6 mm (1 ⁄ 8 in. – 1 ⁄ 4 in.) bead
surface.
• Steel cover: place a 3 mm – 6 mm (1 ⁄ 8 in. – 1 ⁄ 4 in.) bead
the cover. Fig. C-21. Line up set screws in multiple units.
• Align the cover mounting holes with the mounting holes on

the retaining housing nut (make sure that the grease fitting
on the cover is accessible when doing so).
• Apply and tighten the cover WASHER

mounting hardware.
WASHER
Fig. C-22. Use washers

and full shims. SHIM SHIM

TABLE C-27. Set screw torque values After extended storage or periods when the housed unit is not in
Shaft Dia. Bearing No. Set Screw Size Torque operation, fresh grease should be added.
mm Nm It’s important to have the right amount of lubrication, because it
in. in. - lbs.
affects the housed unit bearing operating temperature as well.
35 32.8
1 7 ⁄ 16 , 1 1 ⁄ 2
22208 3⁄8 - 24TPI
290
An inadequate amount of grease could lead to higher operating
40 32.8 temperatures due to inadequate lubrication film thickness.
22209 3⁄8 - 24TPI
1 11 ⁄ 16 , 1 3 ⁄ 4 290 Excessive grease also will lead to higher operating temperatures
50
22210 3⁄8 in. - 24TPI
32.8 due to grease churning, which can cause bearing overheating.
1 15 ⁄ 16 , 2 290
It is best to observe the bearing and its temperature and adjust
55 32.8
2 3 ⁄ 16 , 2 1 ⁄ 4
22211 3⁄8 in. - 24TPI
290
the lubrication as needed. If necessary, use the purge valve or
60, 65 70.1 seals that purge to reduce the amount of grease.
22213 1⁄2 in. - 20TPI
2 7 ⁄ 16 , 2 1 ⁄ 2 620
70, 75
2 11 ⁄ 16 , 2 3 ⁄ 4 22215 1⁄2 in. - 20TPI
70.1 NOTE
620
2 15 ⁄ 16 , 3 Please check with the manufacturer of your grease
80, 85, 90
70.1
3 3 ⁄ 16 , 3 1 ⁄ 4 22218 1⁄2 in. - 20TPI
620
3 7 ⁄ 16 , 3 1 ⁄ 2
100 5⁄8
149.7
22220 in. - 18TPI
3 15 ⁄ 16 , 4 1325
WARNING
110, 115 149.7
4 7 ⁄ 16 , 4 1 ⁄ 2
22222 5⁄8 in. - 18TPI
1325 Failure to observe the following warnings
could create a risk of death or serious injury.
125, 130 5⁄8
149.7
22226 in. - 18TPI
4 15 ⁄ 16 , 5 1325
Proper maintenance and handling practices are critical.
maintain proper lubrication.
Overheated bearings can ignite explosive atmospheres.
LUBRICATION maintain, and lubricate housed unit bearings that are used
This information is to aid in the proper lubrication of Timken of combustible gases or accumulations of dust such as
spherical roller bearing solid-block housed units for the majority from grain, coal, or other combustible materials. Consult
of applications. maintenance instructions.
Housed units have been factory-prelubricated with an NLGI
No. 2 lithium-complex, extreme pressure synthetic grease that
combines the benefits of wide operating temperatures and broad
compatibility with varied materials. This grease offers excellent
thermal stability through temperatures ranging from -40° C to
177° C (-40° F to 350° F). Housed units should be relubricated with
It is vital that the greases used are compatible. Please consult
with your Timken engineer for the grease specifications if the use
of a grease other than the grease mentioned above is needed.
environment at temperatures between -34° C to +82° C (-30° F
temperature, or exposure to moisture, dirt or corrosive chemicals,
periodic relubrication may be necessary. For extreme conditions
or conditions in which special chemicals are used, consult with
your Timken engineer.

Relubrication
Adequate lubrication is an essential element to the housed these tables. Applications should be regularly reviewed and
unit bearing life. Use table C-28 as a suggested initial point of lubrication amounts and intervals modified as needed to ensure
reference. Relubrication frequency and quantity intervals are the best results.
best determined through experience for each application based
on types of service, which may differ from the suggestions in
the table.
When the housed unit is not in operation for an extended period
of time, grease should be added to prevent corrosion.
Table C-28 shows general lubrication suggested starting points
only. Please read the entire installation instructions prior to using
TABLE C-28. ReLubrication Intervals

Dia. No. Weight Weight
<160° >160° <160° >160° <160° >160° <160° >160° <160° >160° <160° >160°
mm g g
in. oz. oz.
35 14.2 2.4
22208 2200 1000 1400 700 1000 500 240 120 120 60 40 20
1 7 ⁄ 16 , 1 1 ⁄ 2 0.5 0.1
40, 45 317.5 5.7

22209 2000 1000 1200 600 800 400 320 160 160 80 80 40
1 11 ⁄ 16 , 1 3 ⁄ 4 0.7 0.2
50 22.7 5.7
22210 1600 800 1000 500 640 320 240 120 120 60 60 30
1 15 ⁄ 16 , 2 0.8 0.2
55 28.4 8.5
22211 1200 600 800 400 440 220 160 80 100 50 60 30
2 3 ⁄ 16 , 2 1 ⁄ 4 1 0.3
60, 65 39.7 11.3

22213 1120 560 720 360 360 180 120 60 80 40 40 20
2 7 ⁄ 16 , 2 1 ⁄ 2 1.4 0.4
70, 75
76.5 19.4
2 11 ⁄ 16 , 2 3 ⁄ 4 22215 1040 520 680 340 340 170 100 50 60 30
2.7 0.7
2 15 ⁄ 16 , 3
80, 85, 90
104.9 25.5
3 3 ⁄ 16 , 3 1 ⁄ 4 22218 960 480 600 300 300 150 80 40 40 20
3.7 0.9
3 7 ⁄ 16 , 3 1 ⁄ 2
100 184.3 45.4

22220 840 420 520 260 240 120 60 30 20 16
3 15 ⁄ 16 , 4 6.5 1.6
110, 115 209.8 53.9

22222 680 340 440 220 200 100 60 30 20 16
4 7 ⁄ 16 , 4 1 ⁄ 2 7.4 1.9
125, 130 300.5 76.5

22226 560 280 360 180 160 80
4 15 ⁄ 16 , 5 10.6 2.7


unit from Fixed to Expansion (floating) unit from Expansion (floating)
Flange Cartridge and Flange Block to Fixed
• Make a reference mark on the housing and retaining nut. Flange Cartridge and Flange Block
• Loosen the Teflon-tipped set screw that locks the retaining • Loosen the Teflon-tipped set screw that locks the retaining
nut in place. nut in place.
• Loosen the retaining nut by tapping it with a hammer and • Tighten the retaining nut by tapping it with a hammer and
punch, rotating the retaining nut counterclockwise one punch, rotating the retaining nut clockwise until it’s tight. It
complete revolution. is not possible to overtighten the retaining nut.
• Tighten the Teflon-tipped set screw. • Tighten the Teflon-tipped set screw.
NOTE Pillow Block
When converting a solid-block housed unit bearing from fixed to • Follow the directions above for flange bearings on both nuts
expansion, it is imperative that the unit that is going to be con- on either side of the housing.
verted is correctly oriented. Since the insert in a steel housed
unit flange bearing is held against either a shoulder or snap ring
opposite the housing retaining nut, a flange bearing that has been NOTE
converted to expansion can only float in the direction of the retain-
ing nut. Based on this, the retaining nut must be on the side of the When converting a solid-block housed unit from expansion to
housing opposite the fixed bearing. fixed on a mounted bearing, the locking-collar set screws
must be released to allow the insert to move both in the
housing and on the shaft.
Pillow Block
• Decide the amount and direction of expansion that’s needed.
If unidirectional expansion is required, follow the directions
outlined above for flange bearings on the nut that is on the
side you want the expansion.

as outlined above for both nuts on flange housed units.

Engineering • Installation Guides • EC Series
EC Series
Please complete the following steps to install Timken EC series • Slide the eccentric locking collar along shaft and onto the
spherical roller bearing solid-block housed units. extended portion of the bearing’s inner ring.
• Ensure that the shaft is clean, free from nicks and burrs, • Rotate the eccentric locking collar until it is hand-tight (the
straight and of proper diameter. See table C-29 for direction of rotation does not matter).
recommended shaft tolerances. The housed unit should
not be mounted on a worn section of the shaft. Using
• Lock the eccentric locking collar firmly in place by using a
spanner wrench or a hammer and drift.
shafts with hardness greater than HRC 45 will reduce the
effectiveness of locking devices. When using a hammer and drift, one or two firm, but not too
hard, blows will be sufficient due to the shallow eccentric
• If using an open-end cover, slide the open-end cover/seal ramp on EC series housed units. Make sure you drive the
combination into position on the shaft. collar in the same direction in which you hand-tightened it so
• Apply a thin oil film to the shaft and bearing bore. as to turn it to a tighter position on the bearing’s inner ring.
• Slide the housed unit into position on the shaft. • Tighten the eccentric locking collar set screws alternately
as per table C-30.
• Install the housed unit mounting bolts. Check the housed
unit alignment. Verify that the mounting surfaces are in the
same flat plane to help achieve good alignment. If shimming
is required to minimize misalignment, use full shims across
the entire housing base where possible (fig. C-23). The
bolts then need to be alternately torqued securely to their
mounting supports.
WASHER
WASHER
SHIM SHIM

If using covers:
• Make sure the mating surface of the cover and retaining • Align the cover mounting holes with the mounting holes on
nuts are clean and dry. the retaining housing nut (make sure that the grease fitting
of the cover, place a 3 mm – 6 mm (1⁄8 in. – 1⁄4 in.) bead • Apply and tighten the cover mounting hardware.
surface.
• Steel cover: place a 3 mm – 6 mm (1⁄8 in. – 1⁄4 in.) bead
the cover.
TABLE C-29. Recommended shaft tolerances TABLE C-30. Set screw torque values
Shaft Dia. Bearing No. Tolerance Shaft Dia. Bearing No. Set Screw Size Torque
mm mm mm Nm
in. in. in. in. - lbs.
35 +0.00/-0.025 35 3 ⁄ 8-24TPI
32.8
22208 22208
1 7 ⁄ 16 , 1 1 ⁄ 2 +0.00/-0.0010 1 7 ⁄ 16 , 1 1 ⁄ 2 290
40, 45 +0.00/-0.038 40, 45 3 ⁄ 8-24TPI

32.8
22209 22209
1 11 ⁄ 16 , 1 3 ⁄ 4 +0.00/-0.0015 1 11 ⁄ 16 , 1 3 ⁄ 4 290
50 +0.00/-0.038 50 3 ⁄ 8-24TPI
32.8
22210 22210
1 15 ⁄ 16 , 2 +0.00/-0.0015 1 15 ⁄ 16 , 2 290
55 +0.00/-0.038 55 3 ⁄ 8-24TPI
32.8
22211 22211
2 3 ⁄ 16 , 2 1 ⁄ 4 +0.00/-0.0015 2 3 ⁄ 16 , 2 1 ⁄ 4 290
60, 65 +0.00/-0.038 60, 65 7 ⁄ 16 -20TPI

48.6
22213 22213
2 7 ⁄ 16 , 2 1 ⁄ 2 +0.00/-0.0015 2 7 ⁄ 16 , 2 1 ⁄ 2 430
70, 75 70, 75
+0.00/-0.051 48.6
2 11 ⁄ 16 , 2 3 ⁄ 4 22215 2 11 ⁄ 16 , 2 3 ⁄ 4 22215 7 ⁄ 16 -20TPI
+0.00/-0.0020 430
2 15 ⁄ 16 , 3 2 15 ⁄ 16 , 3
80, 85, 90 80, 85, 90
+0.00/-0.076 48.6
3 3 ⁄ 16 , 3 1 ⁄ 4 22218 3 3 ⁄ 16 , 3 1 ⁄ 4 22218 7 ⁄ 16 -20TPI
+0.00/-0.0030 430
3 7 ⁄ 16 , 3 1 ⁄ 2 3 7 ⁄ 16 , 3 1 ⁄ 2
100 100
+0.00/-0.076 70.1
3 11 ⁄ 16 , 3 3 ⁄ 4 22220 3 11 ⁄ 16 , 3 3 ⁄ 4 22220 9 ⁄ 16 -18TPI
+0.00/-0.0030 620
3 15 ⁄ 16 , 4 3 15 ⁄ 16 , 4
110, 115 +0.00/-0.127 110, 115 5 ⁄ 8-18TPI

149.7
22222 22222
4 7 ⁄ 16 , 4 1 ⁄ 2 +0.00/-0.0050 4 7 ⁄ 16 , 4 1 ⁄ 2 1325
125, 130 +0.00/-0.127 125, 130 5 ⁄ 8-18TPI

149.7
22226 22226
4 15 ⁄ 16 , 5 +0.00/-0.0050 4 15 ⁄ 16 , 5 1325
140, 150 140, 150

+0.00/-0.127 149.7
5 7 ⁄ 16 , 5 1 ⁄ 2 23230 5 7 ⁄ 16 , 5 1 ⁄ 2 23230 5 ⁄ 8-18TPI
+0.00/-0.0050 1325
5 15 ⁄ 16 , 6 5 15 ⁄ 16 , 6
170, 180 170, 180
+0.00/-0.127 149.7
6 7 ⁄ 16 , 6 1 ⁄ 2 23234 6 7 ⁄ 16 , 6 1 ⁄ 2 23234 5 ⁄ 8-18TPI
+0.00/-0.0050 1325
6 15 ⁄ 16 , 7 6 15 ⁄ 16 , 7

LUBRICATION Relubrication
This information is to aid in the proper lubrication of Timken Adequate lubrication is an essential element to the housed
spherical roller bearing solid-block housed units for the majority unit bearing life. Use table C-31 as a suggested initial point of
of applications. reference. Relubrication frequency and quantity intervals are
Housed units have been factory-prelubricated with an NLGI best developed through experience for each application based
No. 2 lithium-complex, extreme-pressure synthetic grease that on types of service, which may differ from the suggestions in
combines the benefits of wide operating temperatures and broad the table.
compatibility with varied materials. This grease offers excellent When the housed unit is not in operation for an extended period
thermal stability through temperatures ranging from -40° C to of time, grease should be added to prevent corrosion.
177° C (-40° F to 350° F). Housed units should be relubricated with Table C-31 shows general lubrication suggested starting points
this grease or one that is compatible and made for roller bearings. only. Please read the entire installation instructions prior to using
It is vital that the greases used are compatible. Please consult these tables. Applications should be regularly reviewed and
with your Timken engineer for the grease specifications if the use lubrication amounts and intervals modified as needed to ensure
of a grease other than the grease mentioned above is needed. the best results.
environment at temperatures between -34° C to +82° C (-30° F to
+180° F). If service is beyond normal conditions due to speed,
temperature, or exposure to moisture, dirt or corrosive chemicals, WARNING
periodic relubrication may be necessary. For extreme conditions Failure to observe the following warnings
or conditions in which special chemicals are used, consult with could create a risk of death or serious injury.
After extended storage or periods when the housed unit is not Proper maintenance and handling practices are critical.
in operation, fresh grease should be added. maintain proper lubrication.
It’s important to have the right amount of lubrication, because it Overheated bearings can ignite explosive atmospheres.
affects the housed unit bearing operating temperature as well. Special care must be taken to properly select, install,
An inadequate amount of grease could lead to higher operating maintain, and lubricate housed unit bearings that are used
temperatures due to inadequate lubrication film thickness. of combustible gases or accumulations of dust such as
Excessive grease also will lead to higher operating temperatures from grain, coal, or other combustible materials. Consult
due to grease churning, which can cause bearing overheating. your equipment designer or supplier for installation and
It is best to observe the bearing and its temperature and adjust
the lubrication as needed. If necessary, use the purge valve or
seals that purge to reduce the amount of grease.
NOTE DISCLAIMER
Please check with the manufacturer of your grease Every reasonable effort has been made to ensure the accuracy of
delivery system for specific information. the information in this writing, but no liability is accepted for errors,
omissions or for any other reason.


Initial Relubrication
Shaft Dia. Bearing No. 100 RPM 250 RPM 500 RPM 1000 RPM 2000 RPM 3000 RPM
Weight Weight
<160° >160° <160° >160° <160° >160° <160° >160° <160° >160° <160° >160°
mm g g
in. oz. oz.
35 14.2 2.8
22208 2200 1000 1400 700 1000 500 240 120 120 60 40 20
1 7 ⁄ 16 , 1 1 ⁄ 2 0.5 0.1
40, 45 19.9 5.7

22209 2000 1000 1200 600 800 400 320 160 160 80 80 40
1 11 ⁄ 16 , 1 3 ⁄ 4 0.7 0.2
50 22.7 5.7
22210 1600 800 1000 500 640 320 240 120 120 60 60 30
1 15 ⁄ 16 , 2 0.8 0.2
55 28.4 8.5
22211 1200 600 800 400 440 220 160 80 100 50 60 30
2 3 ⁄ 16 , 2 1 ⁄ 4 1 0.3
60, 65 39.7 11.3

22213 1120 560 720 360 360 180 120 60 80 40 40 20
2 7 ⁄ 16 , 2 1 ⁄ 2 1.4 0.4
70, 75
76.5 19.8
2 11 ⁄ 16 , 2 3 ⁄ 4 22215 1040 520 680 340 340 170 100 50 60 30
2.7 0.7
2 15 ⁄ 16 , 3
80, 85, 90
104.9 25.5
3 3 ⁄ 16 , 3 1 ⁄ 4 22218 960 480 600 300 300 150 80 40 40 20
3.7 0.9
3 7 ⁄ 16 , 3 1 ⁄ 2
100
184.3 45.4
3 11 ⁄ 16 , 3 3 ⁄ 4 22220 840 420 520 260 240 120 60 30 20 16
6.5 1.6
3 15 ⁄ 16 , 4
110, 115 209.8 53.9

22222 680 340 440 220 200 100 60 30 20 16
4 7 ⁄ 16 , 4 1 ⁄ 2 7.4 1.9
125, 130 300.5 76.5

22226 560 280 360 180 160 80
4 15 ⁄ 16 , 5 10.6 2.7
140, 150
589.7 147.4
5 7 ⁄ 16 , 5 1 ⁄ 2 23230 480 240 320 160 120 68
20.8 5.2
5 15 ⁄ 16 , 6
170,180
85.0 241.0
6 7 ⁄ 16 , 6 1 ⁄ 2 23234 400 160 240 160 110 60
30.0 8.5
6 15 ⁄ 16 , 7

How to Convert A SOLID-BLOCK housed How to Convert A SOLID-BLOCK housed

nut in place.
punch, rotating the retaining nut clockwise until it’s tight. It
• Loosen the retaining nut by tapping it with a hammer and is not possible to overtighten the retaining nut.
• Tighten the Teflon-tipped set screw.
Pillow Block
NOTE • Follow the directions above for flange bearings on both
When converting a solid-block housed unit bearing from fixed nuts on either side of the housing.
to expansion, it is imperative that the unit that is going to be
unit flange bearing is held against either a shoulder or snap ring NOTE
opposite the housing retaining nut, a flange bearing that has When converting a solid-block housed unit from expansion to
been converted to expansion can only float in the direction of the fixed on a mounted bearing, the locking collar set screws
retaining nut. Based on this, the retaining nut must be on the side must be released to allow the insert to move both in the
of the housing opposite the fixed bearing. housing and on the shaft.
Pillow Block
• Decide the amount and direction of expansion that’s needed.
If unidirectional expansion is required, follow the directions
outlined above for flange bearings on the nut that is on the
side you want the expansion.

outlined above for both nuts on flange housed units.

Engineering • Installation Guides • TA/DV Series
TA/DV Series
Choose one of the following two methods for installing your If using covers:
housed unit depending on your situation. Timken recommends the
axial drive-up method for most applications. If your application is
not as critical, the simpler tang counting method is fine.
of the cover, place a 3 mm – 6 mm (1⁄8 in. – 1⁄4 in.) bead
Axial Drive-Up Method of polyurethane adhesive sealant on the roughened
• Clean all components of any debris and apply a thin oil film surface.
to all mating surfaces to ensure proper seating. • Steel cover: place a 3 mm – 6 mm (1⁄8 in. – 1⁄4 in.) bead
• If using an open-end cover, slide the open-end cover/seal of silicone adhesive sealant on the mating surface of
combination into position on the shaft. the cover.
• Slide the adapter sleeve into position on the shaft, then put • Align the cover mounting holes with the mounting holes on
the housed unit into place on the adapter sleeve. the retaining housing nut (make sure that the grease fitting
• Loosely install the housed unit mounting bolts. Check the on the cover is accessible when doing so).
housed unit alignment. Verify mounting surfaces are in the • Apply and tighten the cover mounting hardware.
the entire housing base where possible (fig. C-24). Washers
should be properly sized to the bolt diameter and should not
be an SAE grade, which is smaller. TABLE C-32. Axial Movement of Tapered Adapter
• Put the lockwasher on and thread the locknut onto the Sleeve Relative to Inner Ring
Minimum Maximum Axial
adapter sleeve leaving approximately 6.350 mm (¼ in.) Shaft Dia. Bearing No.
Axial Movement Movement
between the lockwasher and the inner ring of the bearing. mm mm mm
in. in. in.
• Use a large screwdriver or pry bar to lever the sleeve into 40
22209
0.38 0.46
position until there is no relative movement between the 1 7 ⁄ 16 , 1 1 ⁄ 2 0.015 0.018
shaft, the adapter sleeve, and the bearing’s inner ring. 45 0.38 0.46
22210
1 11 ⁄ 16 , 1 3 ⁄ 4 0.015 0.018
• Rotate the locknut until hand-tight. 50
1 15 ⁄ 16 , 2
22211
0.46
0.018
0.56
0.022
• Tighten the locknut while using a dial indicator to measure 55
22212
0.46 0.56
the axial movement of the tapered adapter sleeve relative – 0.018 0.022
60 0.46 0.56
to the bearing’s inner ring (see table C-32). 2 3 ⁄ 16 , 2 1 ⁄ 4
22213
0.018 0.022
• Bend a tang on the lockwasher into a slot on the locknut to 65

2 7 ⁄ 16 , 2 1 ⁄ 2
22215
0.64
0.025
0.76
0.030
prevent the locknut from loosening. 70 0.64 0.76
22216
• Tighten the housed unit mounting bolts. 2 11 ⁄ 16 , 2 3 ⁄ 4
75
22217
0.025
0.69
0.030
0.97
2 15 ⁄ 16 , 3 0.027 0.038
80 0.69 0.97
22218
3 3 ⁄ 16 , 3 1 ⁄ 4 0.027 0.038
85 0.69 0.97
22219
– 0.027 0.038
90 0.69 0.97
22220
3 7 ⁄ 16 , 3 1 ⁄ 2 0.027 0.038
100 0.76 1.07
22222
3 15 ⁄ 16 , 4 0.030 0.042
110 0.76 1.07
22224
4 3 ⁄ 16 , 4 1 ⁄ 4 0.030 0.042
115 0.89 1.27
22226
4 7 ⁄ 16 , 4 1 ⁄ 2 0.035 0.050
125 0.89 1.27
22228
4 15 ⁄ 16 , 5 0.035 0.050

Tang Counting Method

• Clean all components of any debris and apply a thin oil film • Note which tang is in line with one slot on the locknut.
to all mating surfaces to ensure proper seating.
• Tighten the locknut until the slot on the locknut passes the
• If using an open-end cover, slide the open-end cover/seal number of tangs shown in table C-33.
combination into position on the shaft.
• Bend a tang on the lockwasher into a slot on the locknut to
• Slide the adapter sleeve into the correct position on the shaft, prevent the locknut from loosening.
then put the housed unit into place on the adapter sleeve.
• Tighten the housed unit mounting bolts.
• Loosely install the housed unit mounting bolts. Check the
housed unit alignment. Verify mounting surfaces are in the If using covers:
the entire housing base where possible (fig. C-24). Washers
should be properly sized to the bolt diameter and should not • Urethane cover: slightly roughen the mating surface
be an SAE grade, which is smaller. of the cover, place a 3 mm – 6 mm (1⁄8 in. – 1⁄4 in.) bead
• Put the lockwasher on and thread the locknut onto the surface.
adapter sleeve, leaving approximately ¼ in. between the
lockwasher and the inner ring of the bearing. • Steel cover: place a 3 mm – 6 mm (1⁄8 in. – 1⁄4 in.) bead
• Use a large screwdriver or pry bar to lever the sleeve into the cover.
position until there is no relative movement between the
shaft, the adapter sleeve and the bearing’s inner ring. • Align the cover mounting holes with the mounting holes on
• Rotate the locknut until hand-tight. the retaining housing nut (make sure that the grease fitting
• Apply and tighten the cover mounting hardware.
WASHER
WASHER
SHIM SHIM

TABLE C-33. Number of Tangs to Locking LUBRICATION

Shaft Dia. Bearing No. Number of Tangs This information is to aid in the proper lubrication of Timken
mm spherical roller bearing solid-block housed units for the majority
in. of applications.
40 Housed units have been factory-prelubricated with an NLGI
22209 3-4
1 7 ⁄ 16 , 1 1 ⁄ 2
No. 2 lithium-complex, extreme-pressure synthetic grease that
45
22210 3-4
combines the benefits of wide operating temperatures and broad
1 11 ⁄ 16 , 1 3 ⁄ 4
compatibility with varied materials. This grease offers excellent
50 thermal stability through temperatures ranging from -40° C to
22211 4-5
1 15 ⁄ 16 , 2 177° C (-40° F to 350° F). Housed units should be relubricated with
55
22212 4-5 It is vital that the greases used are compatible. Please consult with
–
your Timken engineer for the grease specifications if the use of a
60
2 3 ⁄ 16 , 2 1 ⁄ 4
22213 4-5 grease other than the grease mentioned above is needed.
65
2 7 ⁄ 16 , 2 1 ⁄ 2
22215 5-6 environment at temperatures between -34° C to +82° C (-30° F
70 temperature or exposure to moisture, dirt or corrosive chemicals,
22216 5-6
2 11 ⁄ 16 , 2 3 ⁄ 4
periodic relubrication may be necessary. For extreme conditions
75
22217 8-9
or conditions in which special chemicals are used, consult with
2 15 ⁄ 16 , 3
80 After extended storage or periods when the housed unit is not
22218 8-9
3 3 ⁄ 16 , 3 1 ⁄ 4
in operation, fresh grease should be added.
85
22219 8-9 It’s important to have the right amount of lubrication, because it
–
affects the housed unit bearing operating temperature as well.
90
22220 8-9 An inadequate amount of grease could lead to higher operating
3 7 ⁄ 16 , 3 1 ⁄ 2
temperatures due to inadequate lubrication film thickness.
100 Excessive grease will lead to higher operating temperatures due
22222 10-11
3 15 ⁄ 16 , 4 to grease churning, which can cause bearing overheating. It is
110
best to observe the bearing and its temperature and adjust the
22224 10-11
4 3 ⁄ 16 , 4 1 ⁄ 4 lubrication as needed. If necessary, use the purge valve or seals
that purge to reduce the amount of grease.
115
22226 10-11
4 7 ⁄ 16 , 4 1 ⁄ 2
NOTE
125
22228 10-11
4 15 ⁄ 16 , 5 Please check with the manufacturer of your grease

WARNING
Relubrication Failure to observe the following warnings
Adequate lubrication is an essential element to the housed could create a risk of death or serious injury.
unit bearing life. Use table C-34 as a suggested initial point of
reference. Relubrication frequency and quantity intervals are Proper maintenance and handling practices are critical.
best determined through experience for each application based Always follow installation instructions and
maintain proper lubrication.
on types of service, which may differ from the suggestions in
the table. Overheated bearings can ignite explosive atmospheres.
When the housed unit is not in operation for an extended period maintain, and lubricate housed unit bearings that are used
of time, grease should be added to prevent corrosion. in or near atmospheres that may contain explosive levels
of combustible gases or accumulations of dust such as
Table C-34 shows general lubrication suggested starting points from grain, coal, or other combustible materials. Consult
only. Please read the entire installation instructions prior to using your equipment designer or supplier for installation and
these tables. Applications should be regularly reviewed and
lubrication amounts and intervals modified as needed to ensure
the best results.
Dia. No. Weight Weight
<160° >160° <160° >160° <160° >160° <160° >160° <160° >160° <160° >160°
mm g g
in. oz. oz.
40 19.8 5.7
22209 2000 1000 1200 600 800 400 320 160 160 80 80 40
1 7 ⁄ 16 , 1 1 ⁄ 2 0.7 0.2
45 22.7 5.7
22210 1600 800 1000 500 640 320 240 120 120 60 60 30
1 11 ⁄ 16 , 1 3 ⁄ 4 0.8 0.7
50 28.4 8.5
22211 1200 600 800 400 440 220 160 80 100 50 60 30
1 15 ⁄ 16 , 2 1.0 0.3
55 34.0 8.5
22212 1150 580 750 380 400 200 140 70 90 50 50 20
– 1.2 0.3
60 39.7 11.3
22213 1120 560 720 360 360 180 120 60 80 40 40 20
2 3 ⁄ 16 , 2 1 ⁄ 4 1.4 0.4
65 76.5 19.8
22215 1040 520 680 340 340 170 100 50 60 30
2 7 ⁄ 16 , 2 1 ⁄ 2 2.7 0.7
70 76.5 19.8
22216 1040 520 680 340 340 170 10 50 60 30
2 11 ⁄ 16 , 2 3 ⁄ 4 2.7 0.7
75 96.4 25.5
22217 1000 500 640 320 320 160 100 50 60 30
2 15 ⁄ 16 , 3 3.4 0.9
80 104.9 25.5
22218 960 480 600 300 300 150 80 40 40 20
3 3 ⁄ 16 , 3 1 ⁄ 4 3.7 0.9
85 104.9 25.5
22219 960 480 600 300 300 150 80 40 40 20
– 3.7 0.9
90 184.3 45.4
22220 840 420 520 260 240 120 60 30
3 7 ⁄ 16 , 3 1 ⁄ 2 6.5 1.6
100 209.8 53.9
22222 680 340 440 220 200 100 60 30
3 15 ⁄ 16 , 4 7.4 1.9
110 260.8 68.0
22224 640 320 400 200 180 90 50 25
4 3 ⁄ 16 , 4 1 ⁄ 4 9.2 2.4
115 340.2 85.0
22226 600 300 360 180 160 80 40 20
4 7 ⁄ 16 , 4 1 ⁄ 2 12.0 3.0
125 396.9 99.2
22228 520 260 340 170 140 75
4 15 ⁄ 16 , 5 14.0 3.5


nut in place.
punch, rotating the retaining nut clockwise until tight. It is
• Loosen the retaining nut by tapping it with a hammer and not possible to overtighten the retaining nut.
• Tighten the Teflon-tipped set screw.
Pillow Block
NOTE
When converting a solid-block housed unit bearing from fixed
• Follow the directions above for flange bearings on both
nuts on either side of the housing.
to expansion, it is imperative that the unit that is going to be
unit flange bearing is held against either a shoulder or snap ring NOTE
opposite the housing retaining nut, a flange bearing that has
been converted to expansion can only float in the direction of the When converting a solid-block housed unit from expansion to
retaining nut. Based on this, the retaining nut must be on the side fixed on a mounted bearing, the locking-collar set screws
of the housing opposite the fixed bearing. must be released to allow the insert to move both in the
housing and on the shaft.
Pillow Block
• Decide the amount and direction of expansion that’s
needed. If unidirectional expansion is required, follow the
directions outlined above for flange bearings on the nut that
is on the side you want the expansion.
• If multi-directional expansion is required, follow the

directions above for both nuts on flange housed units.


SPHERICAL ROLLER BEARING Solid-Block
SOLID-BLOCK Housed
HOUSED units
UNITS
SPHERICAL ROLLER BEARING

SOLID-BLOCK HOUSED UNITS
PRODUCT DATA TABLES
When your equipment faces harsh environments, you need
spherical roller bearing solid-block housed units rugged
enough to withstand tough conditions and deliver exceptional
performance. You gain both with Timken® spherical roller
bearing solid-block housed units.
Nomenclatures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-54
Seal and Cover Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-59
V-Lock® Series (double taper lock). . . . . . . . . . . . . . . . . . . . . C-73
CL Series (concentric [set screw] lock). . . . . . . . . . . . . . . . . C-99
EC Series (eccentric lock) . . . . . . . . . . . . . . . . . . . . . . . . . . . C-129
TA/DV Series (tapered adapter lock). . . . . . . . . . . . . . . . . . C-153
Take-Up Frames. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-169

SPHERICAL ROLLER BEARING SOLID-BLOCK HOUSED UNIT nomenclature
SPHERICAL ROLLER BEARING SOLID-BLOCK

HOUSED UNIT Nomenclature
QM P 13 J 207 S E M
Locking Style
Qm – eccentric lock
qa – concentric (set screw) lock, single-collar
qaa – concentric (set screw) lock, double-collar
qv – V-Lock®, single-nut
Qvv – V-Lock, double-nut
Dv – tapered adapter lock (heavy-duty block)
Ta – tapered adapter lock (extreme-duty block)
Housing Style
P – Type E dimension two-bolt pillow block PX – 5000 series four-bolt pillow block
PL – two-bolt pillow block, S2000 style f – square flange block
PA – SAF-style two-bolt pillow block fb – square flange block
PN – SN-style two-bolt pillow block fl – square flange block
SN – SN-style two-bolt pillow block fx – 5000 series flange block
PKT – 9000 series two-bolt pillow block fy – round flange block
PXT – 5000 series two-bolt pillow block fk – 9000 series flange block
PR – Type E dimension four-bolt pillow block c – piloted flange cartridge
PF – four-bolt pillow block, S2000 style cw – piloted flange cartridge
PH – SAF-style four-bolt pillow block fc – piloted flange cartridge
PG – SN-style four-bolt pillow block mc – cartridge block
PK – 9000 series four-bolt pillow block tu – take-up block
Bearing Insert BORE Series

222XX (i.e., 13 = 22213)
232XX (for size 30 and 34 bearing only)
Bearing Insert LOCKING Type

J – EC series
A and AA – CL series
V – V-Lock series
K – TA/DV series
Shaft Diameter
In inch (i.e., 207 = 2 7 ⁄ 16 in.) and metric (i.e., 050 = 50 mm) sizes
CAST-STEEL HOUSING
Expansion or Non-expansion
BLANK (No letter) – Non-expansion (fixed)
E – Expansion (floating)
Seal Type
M – M seal (triple-lip nitrile rubber) C – C seal (double-lip Viton)
N – N seal (triple-lip DuPont™ Viton®) T – T seal (DuPont™ Teflon® labyrinth) DuPont™ is a trademark of E.I. du Pont de Nemours and Company.
O – O seal (triple-lip urethane) ydr – flange cartridge backing plate Teflon® is a registered trademark of E.I. du Pont de Nemours and Company.
B – B seal (double-lip nitrile rubber) with dr triple-lip seal Viton® is a registered trademark of E.I. du Pont de Nemours and Company.

Steel Cover Nomenclature
Steel Cover Nomenclature

CJ 18 T 085 S
Open-End Steel Cover

Locking Style
CA – concentric lock
CJ – eccentric lock
CV – V-Lock
CK – tapered adapter lock
Bearing Insert Series

222XX (i.e., 13 = 22213)
Seal Type
T seal only
Shaft size
Steel Cover
CS 18 STEEL
Closed-End Steel Cover
Bearing insert series

222XX (i.e., 13 = 22213)
Steel Cover

urethane cover nomenclature
Urethane Cover Nomenclature

CJ DR 207
Open-End Cover with DR Seal
Locking Style
Triple-Lip Secondary seal
Shaft size
CJ VR 13
Open-End Cover with VR Seal
Locking Style
CV – V-Lock
SEAL TYPE
VR ring

222XX (i.e., 13 = 22213)
CV DR 13 – 085
V-Lock® Open-End Cover with DR Seal
Locking Style
CV – V-Lock
Triple-Lip Secondary seal

222XX (i.e., 13 = 22213)
Shaft size
CS 13
Closed-End Cover
222XX (i.e., 13 = 22213)

Backing plate Nomenclature
Backing Plate Nomenclature

UFP 207
Backing Plate
(Only Available for CA and CJ Series Bearings)
Square Flange Block with VR Seal
Shaft size
HSY 085
Backing Plate
(Only Available for CA and CJ Series Bearings)
Round piloted flange cartridge with DR seal
Shaft size

ordering SOLID-BLOCK HOUSED UNITS
Ordering SOLID-BLOCK housed UNITS

Every solid-block housed unit is made of cast steel for greater strength (compared to cast iron). All bearings
feature a double-row, spherical roller bearing design for a high load-carrying capacity, misalignment tolerance
and reduced friction.
Starting with these standard design advantages, you can choose from a wide range of sizes, locking styles,
seal options and housing styles suited precisely for your application.
There are many ways to determine the correct solid-block housed unit part number for ordering purposes:
• Once you determine the best locking style, housing and seal options for your application, you can easily
find the correct part number in the tables included in the following sections.
• If you are ordering a replacement for an existing housed unit, locate the part number for that housed
unit on the housing tag.
• If none of the above apply, or if you have additional questions or concerns about ordering the correct
housed unit, contact your Timken engineer.

Seal AND COVER OPTIONS • primary seals
Seal AND COVER OPTIONS

Primary Seals
Primary seals are installed between the inner ring of the bearing and the housing. They are held
securely in place by the external housing nut. Primary seals can be contacting or non-contacting,
purging or non-purging and are available in several material compounds for a variety of applications.
Triple-Lip Seals – contacting, self-purging,

low to moderate speeds(1)
Timken offers three kinds of medium-contact triple-lip seals. Choose from
seals made of nitrile synthetic rubber (acrylonitrile butadiene), DuPont™ Viton®
fluoroelastomer or urethane.
• M Seal – This seal, made of nitrile rubber, offers superior sealing in moist
and dirty applications. It is chemical- and corrosion-resistant and provides
excellent lubrication retention. It also allows excess grease to purge from
the bearing cavity. Fig. C-25. Triple-lip seals.
• N Seal – Made of DuPont Viton, this seal provides excellent chemical

resistance and can operate at higher temperatures than nitrile rubber.
• O Seal – Made of high-strength urethane for superior abrasion resistance.

Labyrinth Seals – non-contacting, non-purging,
all speeds(2)
Instead of trying to form a seal with a single strong barrier, a labyrinth seal uses
a winding passageway to accomplish the same reduction in flow. Not only is
seal friction reduced, but so is seal wear.
• T Seal – This seal consists of a DuPont Teflon® ring pressed onto the
™
inner ring of the bearing that floats between two pieces of formed steel
to accommodate misalignment. When using this seal, the housing comes
with a vent fitting. Developed for higher-speed applications involving Fig.C-26. T seal.
dirty conditions or moisture-affected areas, it is able to operate at higher
temperatures and is impervious to most chemicals.
Double-Lip Seals – contacting, non-purging,

low speeds(1) (2)
These seals incorporate a double-lip seal, a garter spring for maximum contact,
and a heavy-duty steel shield that protects the seal from large pieces of debris
that could damage the seal itself.
• B Seal – Made of nitrile rubber, this seal offers superior protection in

applications with oil lubrication and is designed for extreme moisture,
fine dust or extremely dirty applications. When using this seal, the housing
Fig. C-27. Double-lip seals.
comes with a vent fitting.
• C Seal – Made of DuPont Viton, this seal provides excellent chemical and
abrasion resistance and can operate at higher temperatures than nitrile DuPont™ is a trademark of
E.I. du Pont de Nemours and Company.
rubber. When using this seal, the housing comes with a vent fitting. Teflon® is a registered trademark of
Temperature limit -40° C to 121° C (-40° F to 250° F) continuous, 149° C (300° F) intermittent. Constant seal-lip pressure
(1) E.I. du Pont de Nemours and Company.
on the inner ring results in higher operating temperatures of the complete unit. (See pages C-25 and C-26). Viton® is a registered trademark of
Relief valve is standard.
(2) E.I. du Pont de Nemours and Company.

seal AND COVER options • Secondary Seals
Secondary Seals
In many circumstances, bearings become damaged in housed units due to premature primary seal
wear. This is usually the result of harsh operating environments or lubrication issues. Timken offers
secondary sealing options that provide an additional barrier to protect the primary seal. These
economical secondary seals and covers are easily outfitted on virtually all solid-block housed units.
Steel Covers
Labyrinth Seals – Non-Contacting, Non-Purging, All Speeds
A labyrinth seal uses a winding passageway to accomplish a reduction in
flow instead of trying to form a seal with a single strong barrier. Seal friction
and wear is reduced.
• T Seal – This seal, which is used in the open-end steel covers, consists Fig. C-28. Open-end steel cover
with T seal.
of a DuPont Teflon ring pressed onto the shaft that floats between two
pieces of formed steel to accommodate misalignment. Developed for
higher-speed applications involving dirty conditions or moisture-affected
areas, it is able to operate at higher temperatures and is impervious to
most chemicals, while avoiding shaft damage.
Urethane Covers
Fig. C-29. Open-end urethane cover
DR Triple-Lip Secondary Seal – low speeds with DR seal.
The DR seal is the standard triple-lip seal adapted for use on the open-end
covers and piloted flange cartridge backing plates (HSY). This seal can move
within the cover or backing plate opening to accommodate misalignment while
maintaining full contact to the shaft for positive sealing.
VR V-Ring Secondary Seal – high speeds

The VR seal, made of nitrile rubber, rides on the shaft and seals against the
Fig. C-30. Open-end urethane cover
open-end covers and flange block backing plates (UFP). with VR seal.
Fig. C-31. HSY backing plate

with DR seal.
Fig. C-32. UFP backing plate

with VR seal.

Seal AND COVER OPTIONS • Secondary Seals
Steel Auxiliary Covers Piloted Flange Cartridge Backing

Steel auxiliary covers bolt directly onto spherical roller bearing Plates (HSY)
solid-block housed units. A DuPont Teflon labyrinth seal on the The HSY backing plate is designed to work in conjunction with
open-ended covers guards against shaft damage and gives the piloted flange cartridge housed units. Made of structural
protection at high running speeds. Made from steel to withstand urethane, these plates are fitted to the back side of the pilot for extra
the toughest applications, the covers are black-oxide treated for protection. The HSY plate comes supplied with a triple-lip seal (DR)
improved corrosion protection. or a contamination collar (optional) to form an additional barrier
These covers are available in both open-ended and closed- against contamination for the most demanding applications.
ended designs for standard and custom configurations of Timken
spherical roller bearing solid-block housed units.
Closed-End Covers (CS)

These bolt-on covers are designed to be virtually indestructible
and extremely convenient. They are made from structural steel
or urethane and are easy to install. The cover completely seals
the bearing, preventing contamination from reaching the primary
seal. Every cover is outfitted with a grease fitting to fill the cover
cavity for an added barrier against contamination.
Fig. C-35. Piloted flange cartridge backing plates.
Flange Block Backing Plates (UFP)

These backing plates are made from structural urethane and are
uniquely designed to work with our flange block housed units.
Made to fit flush against the back of the housing, these plates
create a labyrinth over the inner ring for additional contamination
protection. The UFP plate, when used with an optional V-ring seal
Fig. C-33. Closed-end covers.
(VR), provides an extra barrier against extreme contamination.
Open-End Covers (CJ/CK/CV)

These bolt-on covers are made from structural steel or urethane
for repeated and continuous use. The covers are used with either
a DuPont Teflon (T seal), triple-lip seal (DR) or a V-ring seal (VR) to
help prevent contamination from reaching the primary seal. Every
cover is outfitted with a grease fitting to fill the cover cavity for
an added barrier against contamination.
Fig. C-36. Flange block backing plates.
Fig. C-34. Open-end covers.

Seal AND COVER OPTIONS • STEEL COVER DIMENSIONS
Steel COVER DIMENSIONS

Table C-35. V-LOCK® Series – Straight bore equivalents
A
Steel Cover Dimensions
E E Cover Part Shaft Bearing
No. Dia. No.
A B C D E F
mm mm mm mm mm mm mm
in. in. in. in. in. in. in.
CS11STEEL CLOSED
F F
CV11T115S 1 15 ⁄ 16 in. 128.5 143.3 79.2 75.2 64.3 89.7
22211
CV11T050S 50 mm 5.06 5.64 3.12 2.96 2.53 3.53
CV11T200S 2 in.
Fig. C-37. Double open-end cover.(1) CS12STEEL CLOSED
CV12T055S 55 mm 129.0 141.5 77.0 72.9 64.5 98.6
22212
CV12T203S 2 3 ⁄ 16 in. 5.08 5.57 3.03 2.87 2.54 3.88
CV12T204S 2 1 ⁄ 4 in.
CS14STEEL CLOSED
E
CV14T060S 60 mm
135.4 159.3 91.4 87.4 67.8 103.6
CV14T207S 2 7 ⁄ 16 in. 22214
5.33 6.27 3.60 3.44 2.67 4.08
CV14T208S 2 1 ⁄ 2 in.
CV14T065S 65 mm
CS16STEEL CLOSED
F CV16T211S 2 11 ⁄ 16 in.
CV16T212S 2 3 ⁄ 4 in.
150.1 167.6 92.5 88.4 75.2 116.1
CV16T070S 70 mm 22216
5.91 6.60 3.64 3.48 2.96 4.57
CV16T215S 2 15 ⁄ 16 in.
Fig. C-38. Single open-end cover.
CV16T075S 75 mm
CV16T300S 3 in.
CS19STEEL CLOSED
CV19T080S 80 mm
C
CV19T303S 3 3 ⁄ 16 in.
D
CV19T304S 3 1 ⁄ 4 in. 167.9 191.0 106.9 102.9 84.1 139.4
22219
CV19T085S 85 mm 6.61 7.52 4.21 4.05 3.31 5.49
CV19T307S 3 7 ⁄ 16 in.
CV19T308S 3 1 ⁄ 2 in.
CV19T090S 90 mm
F
CS22STEEL CLOSED
CV22T311S 3 11 ⁄ 16 in.
CV22T312S 3 3 ⁄ 4 in. 217.7 241.8 133.1 129.0 109.0 180.1
22222
Fig. C-39. Single closed-end cover. CV22T100S 100 mm 8.57 9.52 5.24 5.08 4.29 7.09
CV22T315S 3 15 ⁄ 16 in.
CV22T400S 4 in.
CS26STEEL CLOSED
B CV26T110S 110 mm
219.7 242.8 133.1 129.0 110.0 209.3
C E CV26T407S 4 7 ⁄ 16 in. 22226
8.65 9.56 5.24 5.08 4.33 8.24
D CV26T408S 4 1 ⁄ 2 in.
CV26T115S 115 mm
CS28STEEL CLOSED
CV28T125S 125 mm
223.5 246.9 135.1 131.1 111.8 209.3
F F CV28T415S 4 15 ⁄ 16 in. 22228
8.80 9.72 5.32 5.16 4.40 8.24
CV28T500S 5 in.
CV28T130S 130 mm
Fig. C-40. Single closed-end cover and single
open-end cover.(1)
(1)
Double covers available only on pillow block and take-up
style bearings.

Table C-36. V-LOCK Series – Tapered bore equivalents Table C-37. CL SERIES – SINGLE AND DOUBLE SET SCREW LOCKS
Steel Cover Dimensions Steel Cover Dimensions

Cover Part Shaft Bearing Cover Part Shaft Bearing
No. Dia. No. No. Dia. No.
A B C D E F A B C D E F
mm mm mm mm mm mm mm mm mm mm mm mm mm
in. in. in. in. in. in. in. in. in. in. in. in. in.
CS11STEEL CLOSED CS08STEEL CLOSED
CV11T115S 1 15 ⁄ 16 in. 124.2 139.2 77.0 72.9 62.2 89.7 CA08T035S 35 mm 115.6 127.8 69.9 65.8 57.9 69.6
22211 22208
CV11T050S 50 mm 4.89 5.48 3.03 2.87 2.45 3.53 CA08T107S 1 7 ⁄ 16 in. 4.55 5.03 2.75 2.59 2.28 2.74
CV11T200S 2 in. CA08T108S 1 1 ⁄ 2 in.
CS13STEEL CLOSED CS09STEEL Closed
CV13T055S 55 mm 130.3 154.2 88.9 84.8 65.3 103.6 CA09T040S 40 mm
22213 121.7 130.8 69.9 65.8 61.0 74.7
CV13T203S 2 3 ⁄ 16 in. 5.13 6.07 3.50 3.34 2.57 4.08 CA09T111S 1 11 ⁄ 16 in. 22209
4.79 5.15 2.75 2.59 2.40 2.94
CV13T204S 2 1 ⁄ 4 in. CA09T112S 1 3 ⁄ 4 in.
CS15STEEL CLOSED CA09T045S 45 mm
CV15T060S 60 mm CS10STEEL CLOSED
142.7 160.3 88.9 84.8 71.4 116.1
CV15T207S 2 7 ⁄ 16 in. 22215 CA10T115S 1 15 ⁄ 16 in. 122.7 132.8 73.2 69.1 61.5 79.8
5.62 6.31 3.50 3.34 2.81 4.57 22210
CV15T208S 2 1 ⁄ 2 in. CA10T050S 50 mm 4.83 5.23 2.88 2.72 2.42 3.14
CV15T065S 65 mm CA10T200S 2 in.
CV17T211S 2 11 ⁄ 16 in. CA11T055S 55 mm 128.5 143.3 79.2 75.2 64.3 89.7
22211
CV17T212S 2 3 ⁄ 4 in. CA11T203S 2 3 ⁄ 16 in. 5.06 5.64 3.12 2.96 2.53 3.53
133.9 156.0 88.9 84.8 67.1 132.1
CV17T070S 70 mm 22217 CA11T204S 2 1 ⁄ 4 in.
5.27 6.14 3.50 3.34 2.64 5.2
CV17T215S 2 15 ⁄ 16 in. CS13STEEL CLOSED
CV17T075S 75 mm CA13T060S 60 mm
135.4 159.3 91.4 87.4 67.8 103.6
CV17T300S 3 in. CA13T207S 2 7 ⁄ 16 in. 22213
5.33 6.27 3.60 3.44 2.67 4.08
CS20STEEL CLOSED CA13T208S 2 1 ⁄ 2 in.
CV20T080S 80 mm CA13T065S 65 mm
CV20T304S 3 1 ⁄ 4 in. 170.4 193.0 108.0 103.9 85.3 160.3 CA15T211S 2 11 ⁄ 16 in.
22220
CV20T085S 85 mm 6.71 7.60 4.25 4.09 3.36 6.31 CA15T212S 2 3 ⁄ 4 in.
148.1 165.6 91.4 87.4 74.2 116.1
CV20T307S 3 7 ⁄ 16 in. CA15T070S 70 mm 22215
5.83 6.52 3.60 3.44 2.92 4.57
CV20T308S 3 1 ⁄ 2 in. CA15T215S 2 15 ⁄ 16 in.
CV20T090S 90 mm CA15T075S 75 mm
CS22STEEL CLOSED CA15T300S 3 in.
CV22T312S 3 3 ⁄ 4 in. 208.5 232.9 128.5 124.5 104.4 180.1 CA18T080S 80 mm
22222
CV22T100S 100 mm 8.21 9.17 5.06 4.90 4.11 7.09 CA18T303S 3 3 ⁄ 16 in.
CV22T315S 3 15 ⁄ 16 in. CA18T304S 3 1 ⁄ 4 in. 164.8 188.0 105.7 101.6 82.6 139.4
22218
CV22T400S 4 in. CA18T085S 85 mm 6.49 7.40 4.16 4.00 3.25 5.49
CS24STEEL CLOSED 213.6 237.7 131.1 127.0 106.7 180.1 CA18T307S 3 7 ⁄ 16 in.
22224
CV24T110S 110 mm 8.41 9.36 5.16 5.00 4.20 7.09 CA18T308S 3 1 ⁄ 2 in.
CS26STEEL CLOSED CA18T090S 90 mm
CV26T110S 110 mm CS20STEEL CLOSED
210.6 233.9 128.5 124.5 105.4 209.3
CV26T407S 4 7 ⁄ 16 in. 22226 CA20T311S 3 11 ⁄ 16 in.
8.29 9.21 5.06 4.90 4.15 8.24
CV26T408S 4 1 ⁄ 2 in. CA20T312S 3 3 ⁄ 4 in. 179.6 202.2 112.5 108.5 89.9 160.3
22220
CV26T115S 115 mm CA20T100S 100 mm 7.07 7.96 4.43 4.27 3.54 6.31
CS28STEEL CLOSED CA20T315S 3 15 ⁄ 16 in.
CV28T125S 125 mm CA20T400S 4 in.
214.6 238.0 130.6 126.5 107.2 209.3
CV28T415S 4 15 ⁄ 16 in. 22228 CS22STEEL CLOSED
8.45 9.37 5.14 4.98 4.22 8.24
CV28T500S 5 in. CA22T110S 110 mm
217.7 241.8 133.1 129.0 109.0 180.1
CV28T130S 130 mm CA22T407S 4 7 ⁄ 16 in. 22222
8.57 9.52 5.24 5.08 4.29 7.09
CA22T408S 4 1 ⁄ 2 in.
CA22T115S 115 mm
CS26STEEL CLOSED
CA26T125S 125 mm
219.7 242.8 133.1 129.0 110.0 209.3
CA26T415S 4 15 ⁄ 16 in. 22226
8.65 9.56 5.24 5.08 4.33 8.24
CA26T500S 5 in.
CA26T130S 130 mm

Table C-38. EC Series – Eccentric Lock
Steel Cover Dimensions Steel Cover Dimensions

Cover Part Shaft Bearing Cover Part Shaft Bearing
No. Dia. No. No. Dia. No.
A B C D E F A B C D E F
mm mm mm mm mm mm mm mm mm mm mm mm mm mm
in. in. in. in. in. in. in. in. in. in. in. in. in. in.
CJ08T035S 35 mm 115.6 127.8 69.9 65.8 57.9 69.6 CJ20T311S 3 11 ⁄ 16 in.
22208
CJ08T107S 1 7 ⁄ 16 in. 4.55 5.03 2.75 2.59 2.28 2.74 CJ20T312S 3 3 ⁄ 4 in. 179.6 202.2 112.5 108.5 89.9 160.3
22220
CJ08T108S 1 1 ⁄ 2 in. CJ20T100S 100 mm 7.07 7.96 4.43 4.27 3.54 6.31
CS09STEEL Closed CJ20T315S 3 15 ⁄ 16 in.
CJ09T040S 40 mm CJ20T400S 4 in.
121.7 130.8 69.9 65.8 61.0 74.7
CJ09T111S 1 11 ⁄ 16 in. 22209 CS22STEEL CLOSED
4.79 5.15 2.75 2.59 2.40 2.94
CJ09T112S 1 3 ⁄ 4 in. CJ22T110S 110 mm
217.7 241.8 133.1 129.0 109.0 180.1
CJ09T045S 45 mm CJ22T407S 4 7 ⁄ 16 in. 22222
8.57 9.52 5.24 5.08 4.29 7.09
CS10STEEL CLOSED CJ22T408S 4 1 ⁄ 2 in.
CJ10T115S 1 15 ⁄ 16 in. 122.7 132.8 73.2 69.1 61.5 79.8 CJ22T115S 115 mm
22210
CJ10T050S 50 mm 4.83 5.23 2.88 2.72 2.42 3.14 CS26STEEL CLOSED
CJ10T200S 2 in. CJ26T125S 125 mm
219.7 242.8 133.1 129.0 110.0 209.3
CS11STEEL CLOSED CJ26T415S 4 15 ⁄ 16 in. 22226
8.65 9.56 5.24 5.08 4.33 8.24
CJ11T055S 55 mm 128.5 143.3 79.2 75.2 64.3 89.7 CJ26T500S 5 in.
22211
CJ11T203S 2 3 ⁄ 16 in. 5.06 5.64 3.12 2.96 2.53 3.53 CJ26T130S 130 mm
CJ11T204S 2 1 ⁄ 4 in. CS30STEEL CLOSED
CS13STEEL CLOSED CJ30T507S 5 7 ⁄ 16 in.
CJ13T060S 60 mm CJ30T508S 5 1 ⁄ 2 in.
135.4 159.3 91.4 87.4 67.8 103.6 270.3 283.2 148.1 144.0 135.1 239.5
CJ13T207S 2 7 ⁄ 16 in. 22213 CJ30T140S 140 mm 23230
5.33 6.27 3.60 3.44 2.67 4.08 10.64 11.15 5.83 5.67 5.32 9.43
CJ13T208S 2 1 ⁄ 2 in. CJ30T515S 5 15 ⁄ 16 in.
CJ13T065S 65 mm CJ30T600S 6 in.
CS15STEEL CLOSED CJ30T150S 150 mm
CJ15T211S 2 11 ⁄ 16 in. CS34STEEL CLOSED
CJ15T212S 2 3 ⁄ 4 in. CJ34T607S 6 7 ⁄ 16 in.
148.1 165.6 91.4 87.4 74.2 116.1
CJ15T070S 70 mm 22215 CJ34T608S 6 1 ⁄ 2 in.
5.83 6.52 3.60 3.44 2.92 4.57 300.5 305.3 155.2 151.1 150.1 279.4
CJ15T215S 2 15 ⁄ 16 in. CJ34T170S 170 mm 23234
11.83 12.02 6.11 5.95 5.91 11.00
CJ15T075S 75 mm CJ34T615S 6 15 ⁄ 16 in.
CJ15T300S 3 in. CJ34T700S 7 in.
CS18STEEL CLOSED CJ34T180S 180 mm
CJ18T080S 80 mm
CJ18T303S 3 3 ⁄ 16 in.
CJ18T304S 3 1 ⁄ 4 in. 164.8 188.0 105.7 101.6 82.6 139.4
22218
CJ18T085S 85 mm 6.49 7.40 4.16 4.00 3.25 5.49
CJ18T307S 3 7 ⁄ 16 in.
CJ18T308S 3 1 ⁄ 2 in.
CJ18T090S 90 mm

Table C-39. TA/DV Series – Tapered Adapter Lock
Steel Cover Dimensions

Cover Part Shaft Bearing
No. Dia. No.
A B C D E F
mm mm mm mm mm mm mm
in. in. in. in. in. in. in.
CS09STEEL CLOSED
CK09T107S 1 7 ⁄ 16 in. 118.4 127.5 68.3 64.3 59.2 74.7
22209
CK09T108S 1 1 ⁄ 2 in. 4.66 5.02 2.69 2.53 2.33 2.94
CK09T040S 40 mm
CS10STEEL CLOSED
CK10T111S 1 11 ⁄ 16 in. 118.4 130.0 70.9 66.8 59.2 79.8
22210
CK10T112S 1 3 ⁄ 4 in. 4.66 5.12 2.79 2.63 2.33 3.14
CK10T045S 45 mm
CS11STEEL CLOSED
CK11T115S 1 15 ⁄ 16 in. 124.2 139.2 77.0 72.9 62.2 89.7
22211
CK11T050S 50 mm 4.89 5.48 3.03 2.87 2.45 3.53
CK11T200S 2 in.
CS12STEEL CLOSED 123.7 136.4 74.4 70.4 62.0 98.6
22212
CK12T055S 55 mm 4.87 5.37 2.93 2.77 2.44 3.88
CS13STEEL CLOSED
CK13T203S 2 3 ⁄ 16 in. 130.3 154.2 88.9 84.8 65.3 103.6
22213
CK13T204S 2 1 ⁄ 4 in. 5.13 6.07 3.50 3.34 2.57 4.08
CK13T060S 60 mm
CS15STEEL CLOSED
CK15T207S 2 7 ⁄ 16 in. 142.7 160.3 88.9 84.8 71.4 116.1
22215
CK15T208S 2 1 ⁄ 2 in. 5.62 6.31 3.50 3.34 2.81 4.57
CK15T065S 65 mm
CS16STEEL CLOSED
CK16T211S 2 11 ⁄ 16 in. 144.8 162.3 89.9 85.9 72.4 116.1
22216
CK16T212S 2 3 ⁄ 4 in. 5.70 6.39 3.54 3.38 2.85 4.57
CK16T070S 70 mm
CS17STEEL CLOSED
CK17T215S 2 15 ⁄ 16 in. 133.9 156.0 88.9 84.8 67.1 132.1
22217
CK17T075S 75 mm 5.27 6.14 3.50 3.34 2.64 5.20
CK17T300S 3 in.
CS18STEEL CLOSED
CK18T080S 80 mm 159.5 182.9 102.9 98.8 79.8 139.4
22218
CK18T303S 3 3 ⁄ 16 in. 6.28 7.20 4.05 3.89 3.14 5.49
CK18T304S 3 1 ⁄ 4 in.
CS19STEEL CLOSED 162.6 185.7 104.4 100.3 81.3 139.4
22219
CK19T085S 85 mm 6.40 7.31 4.11 3.95 3.20 5.49
CS20STEEL CLOSED
CK20T307S 3 7 ⁄ 16 in. 170.4 193.0 108.0 103.9 85.3 160.3
22220
CK20T308S 3 1 ⁄ 2 in. 6.71 7.60 4.25 4.09 3.36 6.31
CK20T090S 90 mm
CS22STEEL CLOSED
CK22T315S 3 15 ⁄ 16 in. 208.5 232.9 128.5 124.5 104.4 180.1
22222
CK22T400S 4 in. 8.21 9.17 5.06 4.90 4.11 7.09
CK22T100S 100 mm
CS24STEEL CLOSED
CK24T403S 4 3 ⁄ 16 in. 213.6 237.7 131.1 127.0 106.7 180.1
22224
CK24T404S 4 1 ⁄ 4 in. 8.41 9.36 5.16 5.00 4.20 7.09
CK24T110S 110 mm
CS26STEEL CLOSED
CK26T407S 4 7 ⁄ 16 in. 210.6 233.9 128.5 124.5 105.4 209.3
22226
CK26T408S 4 1 ⁄ 2 in. 8.29 9.21 5.06 4.90 4.15 8.24
CK26T115S 115 mm
CS28STEEL CLOSED
CK28T415S 4 15 ⁄ 16 in. 214.6 238.0 130.6 126.5 107.2 209.3
22228
CK28T500S 5 in. 8.45 9.37 5.14 4.98 4.22 8.24
CK28T125S 125 mm

Seal AND COVER Options • URETHANE • Closed-end cover dimensions
URETHANE
Closed-end Cover Dimensions
C1
Table C-40. Closed-end Cover Dimensions

Cover Part No.(1) A B C1(2)
mm mm mm
in. in. in.
97.0 76.7 31.8
CS08
3.82 3.02 1.25
101.8 81.5 31.8
CS09
4.01 3.21 1.25
106.9 86.6 31.8
CS10
4.21 3.41 1.25
117.1 96.8 31.8
CS11
4.61 3.81 1.25
126.0 105.7 31.8
CS12V
4.96 4.16 1.25
132.1 116.1 31.8
CS13/CS14V
5.20 4.57 1.08
142.0 122.9 33.0
CS15/CS16V
5.59 4.84 1.30
160.5 141.5 31.0
CS17
6.32 5.57 1.22
168.1 149.1 38.9
CS18/CS19V
6.62 5.87 1.53
192.0 174.7 44.5
CS20
7.56 6.88 1.75
212.1 194.8 52.6
CS22
8.35 7.67 2.07
212.1 194.8 52.6
CS24
8.35 7.67 2.07
241.3 223.8 56.9
CS26/CS28V
9.50 8.81 2.24
271.5 254.0 56.9
CS30
10.69 10.00 2.24
304.8 287.3 56.9
CS34
12.00 11.31 2.24
(1)
Cover part number, CSXX, is determined by the bearing insert series of unit on
which cover will be installed. See nomenclature guide on page C-54 to determine
bearing insert series.
(2)
Extended covers available upon request.

Seal AND COVER Options • URETHANE • OPEN-end coverS with DR SEALS
Open-end Covers with DR Seals
C1C1
C2C2
Table C-41. V-LOCK SERIES – STRAIGHT BORE EQUIVALENT – Table C-42. V-LOCK SERIES – TAPERED ADAPTER EQUIVALENT –
OPEN-END COVER WITH DR SEAL – OPEN-END COVER WITH DR SEAL –
(QV[V]...P, PL, SN, PF, PR, C, CW, F, FL, FY, FX, TU) (QV[V]...PA, PN, PKT, PK, PH, PG, FC, FB, MC)
Cover Part Shaft Cover Part Shaft
A B C1 C2 A B C1 C2
No. Dia. No. Dia.
mm mm mm mm mm mm mm mm mm mm
in. in. in. in. in. in. in. in. in. in.
CVDR115 1 15 ⁄ 16 in. CKDR115 1 15 ⁄ 16 in.
117.1 96.8 31.8 34.3 117.1 96.8 31.8 34.3
CVDR200 2 in. CKDR200 2 in.
4.61 3.81 1.25 1.35 4.61 3.81 1.25 1.35
CVDR050MM 50 mm CKDR050MM 50 mm
CVDR203 2 3 ⁄ 16 in. CKDR203 2 3 ⁄ 16 in.
126.0 105.7 31.8 34.3 132.1 116.1 27.4 30.0
CVDR204 2 1 ⁄ 4 in. CKDR204 2 1 ⁄ 4 in.
4.96 4.16 1.25 1.35 5.20 4.57 1.08 1.18
CVDR207 2 7 ⁄ 16 in. 132.1 116.1 27.4 30.0 CKDR207 2 7 ⁄ 16 in. 142.0 122.9 33.0 35.6
CVDR208 2 1 ⁄ 2 in. 5.20 4.57 1.08 1.18 CKDR208 2 1 ⁄ 2 in. 5.59 4.84 1.30 1.40
CVDR211 2 11 ⁄ 16 in. CKDR211 2 11 ⁄ 16 in.
CVDR212 2 3 ⁄ 4 in. CKDR212 2 3 ⁄ 4 in.
CVDR070MM 70 mm 142.0 122.9 33.0 35.6 CKDR070MM 70 mm 160.5 141.5 31.0 33.5
CVDR215 2 15 ⁄ 16 in. 5.59 4.84 1.30 1.40 CKDR215 2 15 ⁄ 16 in. 6.32 5.57 1.22 1.32
CVDR303 3 3 ⁄ 16 in. CKDR303 3 3 ⁄ 16 in.
CVDR304 3 1 ⁄ 4 in. CKDR304 3 1 ⁄ 4 in.
168.1 149.1 38.9 41.4 192.0 174.8 44.5 47.0
6.62 5.87 1.53 1.63 7.56 6.88 1.75 1.85
CVDR307 3 7 ⁄ 16 in. CKDR307 3 7 ⁄ 16 in.
CVDR308 3 1 ⁄ 2 in. CKDR308 3 1 ⁄ 2 in.
CVDR311 3 11 ⁄ 16 in. CKDR311 3 11 ⁄ 16 in.
CVDR312 3 3 ⁄ 4 in. CKDR312 3 3 ⁄ 4 in.
212.1 194.8 52.6 55.1 212.1 194.8 52.6 55.1
8.35 7.67 2.07 2.17 8.35 7.67 2.07 2.17
CVDR315 3 15 ⁄ 16 in. CKDR315 3 15 ⁄ 16 in.
CVDR407 4 7 ⁄ 16 in. 241.3 223.8 56.9 59.4 CKDR407 4 7 ⁄ 16 in. 241.3 223.8 56.9 59.4
CVDR408 4 1 ⁄ 2 in. 9.50 8.81 2.24 2.34 CKDR408 4 1 ⁄ 2 in. 9.50 8.81 2.24 2.34
CVDR415 4 15 ⁄ 16 in. 241.3 223.8 56.9 59.4 CKDR415 4 15 ⁄ 16 in. 241.3 223.8 56.9 59.4
CVDR500 5 in. 9.50 8.81 2.24 2.34 CKDR500 5 in. 9.50 8.81 2.24 2.34

Seal AND COVER Options • URETHANE • OPEN-end coverS with DR SEALS
Table C-43. CL and EC Series – Open-end Cover with DR Seal

Cover Part Shaft
A B C1 C2
No. Dia.
mm mm mm mm mm
in. in. in. in. in.
CJDR035MM 35 mm
97.0 76.7 31.8 34.3
CJDR107 1 7 ⁄ 16 in. C1C1
3.82 3.02 1.25 1.35
CJDR108 1 1 ⁄ 2 in. C2C2
CJDR040MM 40 mm
CJDR111 1 11 ⁄ 16 in. 101.9 81.6 31.8 34.3
CJDR112 1 3 ⁄ 4 in. 4.01 3.21 1.25 1.35 Table C-44. TA/DV Series – Open-end Cover with DR Seal
CJDR045MM 45 mm Cover Part Shaft
A B C1 C2
CJDR115 1 15 ⁄ 16 in. No. Dia.
106.9 86.6 31.8 34.3
CJDR200 2 in. mm mm mm mm mm
4.21 3.41 1.25 1.35
CJDR050MM 50 mm in. in. in. in. in.
CJDR203 2 3 ⁄ 16 in. CKDR107 1 7 ⁄ 16 in.
117.1 96.8 31.8 34.3 101.9 81.5 31.8 34.3
CJDR204 2 1 ⁄ 4 in. CKDR108 1 1 ⁄ 2 in.
4.61 3.81 1.25 1.35 4.01 3.21 1.25 1.35
CJDR055MM 55 mm CKDR040MM 40 mm
CJDR060MM 60 mm CKDR111 1 11 ⁄ 16 in.
106.9 86.6 31.8 34.3
CJDR207 2 7 ⁄ 16 in. 132.1 116.1 27.4 30.0 CKDR112 1 3 ⁄ 4 in.
4.21 3.41 1.25 1.35
CJDR208 2 1 ⁄ 2 in. 5.20 4.57 1.08 1.18 CKDR045MM 45mm
CJDR065MM 65 mm CKDR115 1 15 ⁄ 16 in.
117.1 96.8 31.8 34.3
CJDR211 2 11 ⁄ 16 in. CKDR200 2 in.
4.61 3.81 1.25 1.35
CJDR212 2 3 ⁄ 4 in. 142 122.9 33.0 35.6 126.0 105.7 31.8 34.3
CKDR055MM 55 mm
CJDR215 2 15 ⁄ 16 in. 5.59 4.84 1.30 1.40 4.96 4.16 1.25 1.35
CJDR300 3 in. CKDR203 2 3 ⁄ 16 in.
132.1 116.1 27.4 30.0
CJDR075MM 75 mm CKDR204 2 1 ⁄ 4 in.
5.20 4.57 1.08 1.18
CJDR303 3 3⁄ 16 in. CKDR060MM 60 mm
CJDR304 3 1 ⁄ 4 in. CKDR207 2 7 ⁄ 16 in.
142.0 122.9 33.0 35.6
CJDR080MM 80 mm CKDR208 2 1 ⁄ 2 in.
168.1 149.1 38.9 41.4 5.59 4.84 1.30 1.40
6.62 5.87 1.53 1.63
CJDR307 3 7⁄ 16 in. CKDR211 2 11 ⁄ 16 in.
142.0 122.9 33.0 35.6
CJDR308 3 1 ⁄ 2 in. CKDR212 2 3 ⁄ 4 in.
5.59 4.84 1.30 1.40
CJDR315 3 15 ⁄ 16 in. CKDR215 2 15 ⁄ 16 in.
192 174.8 44.5 47.0 160.5 141.5 31.0 33.5
CJDR400 4 in. CKDR300 3 in.
7.56 6.88 1.75 1.85 6.32 5.57 1.22 1.32
168.1 149.1 38.9 41.4
CJDR407 4 7 ⁄ 16 in. 212.1 194.8 52.6 55.1 CKDR303 3 3 ⁄ 16 in.
6.62 5.87 1.53 1.63
CJDR408 4 1 ⁄ 2 in. 8.35 7.67 2.07 2.17 CKDR304 3 1 ⁄ 4 in.
CJDR115MM 115 mm 168.1 149.1 38.9 41.4
CKDR085MM 85 mm
CJDR125MM 125 mm 6.62 5.87 1.53 1.63
CJDR415 4 15 ⁄ 16 in. 241.3 223.8 56.9 59.4 CKDR307 3 7 ⁄ 16 in.
192.0 174.8 44.5 47.0
CJDR500 5 in. 9.50 8.81 2.24 2.34 CKDR308 3 1 ⁄ 2 in.
7.56 6.88 1.75 1.85
CJDR507 5 7 ⁄ 16 in. CKDR315 3 15 ⁄ 16 in.
212.1 194.8 52.6 55.1
CJDR508 5 1 ⁄ 2 in. CKDR400 4 in.
8.35 7.67 2.07 2.17
CJDR140MM 140 mm 271.6 254.0 56.9 59.4 CKDR100MM 100 mm
CJDR515 5 15 ⁄ 16 in. 10.69 10.00 2.24 2.34 CKDR403 4 3 ⁄ 16 in.
212.1 194.8 52.6 55.1
CJDR600 6 in. CKDR404 4 1 ⁄ 4 in.
8.35 7.67 2.07 2.17
CJDR607 6 7 ⁄ 16 in. CKDR407 4 7 ⁄ 16 in.
241.3 223.8 56.9 59.4
CJDR608 6 1 ⁄ 2 in. CKDR408 4 1 ⁄ 2 in.
9.50 8.81 2.24 2.34
CJDR170MM 170 mm 304.8 287.3 56.9 59.4 CKDR115MM 115 mm
CJDR615 6 15 ⁄ 16 in. 12.00 11.31 2.24 2.34 CKDR415 4 15 ⁄ 16 in.
241.3 223.8 56.9 59.4
CJDR700 7 in. CKDR500 5 in.
9.50 8.81 2.24 2.34

Seal AND COVER Options • URETHANE • open-end covers with VR seals
Open-end Covers with VR Seals
C1
C2
Table C-45. V-LOCK SERIES – STRAIGHT BORE EQUIVALENT – Table C-46. V-LOCK SERIES – TAPERED ADAPTER EQUIVALENT –
OPEN-END COVER WITH VR SEAL – OPEN-END COVER WITH VR SEAL –
(QV[V)]...P, PL, SN, PF, PR, PX, PXT, C, CW, F, FL, FY, FX, TU) (QV[V]...PA, PN, PKT, PK, PH, PG, FC, FB, MC)
A B C1 C2 A B C1 C2
No.(1) Dia. No. Dia.
1 15 ⁄ 16 in. 1 15 ⁄ 16 in.
117.1 96.8 31.8 40.6 117.1 96.8 31.8 40.6
CVVR11 2 in. CKVR11 2 in.
4.61 3.81 1.25 1.60 4.61 3.81 1.25 1.60
50 mm 50 mm
2 3 ⁄ 16 in. 2 3 ⁄ 16 in.
126.0 105.7 31.8 40.6 132.1 116.1 27.4 36.3
CVVR12 2 1 ⁄ 4 in. CKVR13 2 1 ⁄ 4 in.
4.96 4.16 1.25 1.60 5.20 4.57 1.08 1.43
55 mm 55 mm
60 mm 60 mm
2 7 ⁄ 16 in. 132.1 116.1 27.4 36.3 2 7 ⁄ 16 in. 142.0 122.9 33.0 41.9
CVVR14 CKVR15
2 1 ⁄ 2 in. 5.20 4.57 1.08 1.43 2 1 ⁄ 2 in. 5.59 4.84 1.30 1.65
65 mm 65 mm
2 11 ⁄ 16 in. 2 11 ⁄ 16 in.
2 3 ⁄ 4 in. 2 3 ⁄ 4 in.
70 mm 142.0 122.9 33.0 44.0 70 mm 160.6 141.5 31.0 41.9
CVVR16 CKVR17
2 15 ⁄ 16 in. 5.59 4.84 1.30 1.73 2 15 ⁄ 16 in. 6.32 5.57 1.22 1.65
3 in. 3 in.
75 mm 75 mm
3 3 ⁄ 16 in. 3 3 ⁄ 16 in.
3 1 ⁄ 4 in. 3 1 ⁄ 4 in.
80 mm 80 mm
168.1 149.1 38.9 50.0 192.0 174.8 44.4 55.4
CVVR19 85 mm CKVR20 85 mm
6.62 5.87 1.53 1.96 7.56 6.88 1.75 2.18
3 7 ⁄ 16 in. 3 7 ⁄ 16 in.
3 1 ⁄ 2 in. 3 1 ⁄ 2 in.
90 mm 90 mm
3 11 ⁄ 16 in. 3 11 ⁄ 16 in.
3 3 ⁄ 4 in. 3 3 ⁄ 4 in.
212.1 194.8 52.6 63.5 212.1 194.8 52.6 63.5
CVVR22 100 mm CKVR22 100 mm
8.35 7.67 2.07 2.50 8.35 7.67 2.07 2.50
3 15 ⁄ 16 in. 3 15 ⁄ 16 in.
4 in. 4 in.
110 mm 212.1 194.8 52.6 63.5
CKVR24 110 mm
4 7 ⁄ 16 in. 241.3 223.8 56.9 69.6 8.35 7.67 2.07 2.5
CVVR26
4 1 ⁄ 2 in. 9.50 8.81 2.24 2.74 110 mm
115 mm 4 7 ⁄ 16 in. 241.3 223.8 56.9 69.6
CKVR26
125 mm 4 1 ⁄ 2 in. 9.50 8.81 2.24 2.74
4 15 ⁄ 16 in. 241.3 223.8 56.9 69.6 115 mm
CVVR28
5 in. 9.50 8.81 2.24 2.74 125 mm
130 mm 4 15 ⁄ 16 in. 241.3 223.8 56.9 69.6
CKVR28
Please refer to bore size when choosing cover for straight-bore V-Lock®.
(1) 5 in. 9.50 8.81 2.24 2.74
130 mm

Seal AND COVER Options • URETHANE • open-end covers with VR seals
C1
C2
Table C-47. CL and EC Series – Open-end Cover with VR Seal Table C-48. TA/DV Series – Open-end Cover with VR Seal
A B C1 C2 A B C1 C2
No. Dia. No. Dia.
35 mm 1 7 ⁄ 16 in.
97.0 76.7 31.8 39.4 101.9 81.5 31.8 39.4
CJVR08 1 7 ⁄ 16 in. CKVR09 1 1 ⁄ 2 in.
3.82 3.02 1.25 1.55 4.01 3.21 1.25 1.55
1 1 ⁄ 2 in. 40 mm
40 mm 1 11 ⁄ 16 in.
106.9 86.6 31.8 40.6
1 11 ⁄ 16 in. 101.9 81.5 31.8 40.6 CKVR10 1 3 ⁄ 4 in.
CJVR09 4.21 3.41 1.25 1.6
1 3 ⁄ 4 in. 4.01 3.21 1.25 1.60 45 mm
45 mm 1 15 ⁄ 16 in.
117.1 96.8 31.8 40.6
1 15 ⁄ 16 in. CKVR11 2 in.
106.9 86.6 31.8 40.6 4.61 3.81 1.25 1.60
CJVR10 2 in. 50 mm
4.21 3.41 1.25 1.60
50 mm 126.0 105.7 31.8 40.6
CKVR12 55 mm
2 3 ⁄ 16 in. 4.96 4.16 1.25 1.6
117.1 96.8 31.8 40.6
CJVR11 2 1 ⁄ 4 in. 2 3 ⁄ 16 in.
4.61 3.81 1.25 1.60 132.1 116.1 27.4 36.3
55 mm CKVR13 2 1 ⁄ 4 in.
5.20 4.57 1.08 1.43
60 mm 60 mm
2 7 ⁄ 16 in. 132.1 116.1 27.4 36.3 2 7 ⁄ 16 in.
CJVR13 142.0 122.9 33.0 41.9
2 1 ⁄ 2 in. 5.20 4.57 1.08 1.43 CKVR15 2 1 ⁄ 2 in.
5.59 4.84 1.30 1.65
65 mm 65 mm
2 11 ⁄ 16 in. 2 11 ⁄ 16 in.
142.0 122.9 33.0 41.9
70 mm CKVR16 2 3 ⁄ 4 in.
5.59 4.84 1.30 1.65
2 3 ⁄ 4 in. 142.0 122.9 33.0 44.0 70 mm
CJVR15
2 15 ⁄ 16 in. 5.59 4.84 1.30 1.73 2 15 ⁄ 16 in.
160.5 141.5 31.0 41.9
3 in. CKVR17 3 in.
6.32 5.57 1.22 1.65
75 mm 75 mm
3 3 ⁄ 16 in. 80 mm
168.1 149.1 38.9 49.8
3 1 ⁄ 4 in. CKVR18 3 3 ⁄ 16 in.
6.62 5.87 1.53 1.96
80 mm 3 1 ⁄ 4 in.
168.1 149.1 38.9 49.8
CJVR18 85 mm 168.1 149.1 38.9 49.8
6.62 5.87 1.53 1.96 CKVR19 85 mm
3 7 ⁄ 16 in. 6.62 5.87 1.53 1.96
3 1 ⁄ 2 in. 3 7 ⁄ 16 in.
192.0 174.8 44.5 55.4
90 mm CKVR20 3 1 ⁄ 2 in.
7.56 6.88 1.75 2.18
3 15 ⁄ 16 in. 90 mm
192.0 174.8 44.5 55.4
CJVR20 4 in. 3 15 ⁄ 16 in.
7.56 6.88 1.75 2.18 212.1 194.8 52.6 63.5
100 mm CKVR22 4 in.
8.35 7.67 2.07 2.50
110 mm 100 mm
4 7 ⁄ 16 in. 212.1 194.8 52.6 65.3 4 3 ⁄ 16 in.
CJVR22 212.1 194.8 52.6 63.5
4 1 ⁄ 2 in. 8.35 7.67 2.07 2.57 CKVR24 4 1 ⁄ 4 in.
8.35 7.67 2.07 2.50
115 mm 110 mm
125 mm 4 7 ⁄ 16 in.
241.3 223.8 56.9 69.6 241.3 223.8 56.9 69.6
CJVR26 4 15 ⁄ 16 in. CKVR26 4 1 ⁄ 2 in.
9.50 8.81 2.24 2.74 9.50 8.81 2.24 2.74
5 in. 115 mm
4 15 ⁄ 16 in.
241.3 223.8 56.9 69.6
CKVR28 5 in.
9.50 8.81 2.24 2.74
125 mm

Seal AND COVER Options • UFP and HSY Flange Block Backing Plate Dimensions
UFP and HSY Flange Block Backing Plate Dimensions

A
E
C
Table C-49. UFP Backing Plate Dimensions(1)

Cover Part No. A C E
mm mm mm
in. in. in.
5.1 95.3 39.4
UFP08
0.20 3.75 1.55
5.1 105.9 44.7
UFP09
0.20 4.17 1.76
3.8 106.4 51.8
UFP10
0.15 4.19 2.04
6.4 114.6 59.7
UFP11
0.25 4.51 2.35
5.1 146.1 64.8
UFP13
0.20 5.75 2.55
5.1 146.6 78.0
UFP15
0.20 5.77 3.07
5.1 187.5 90.4
UFP18
0.20 7.38 3.56
5.1 206.5 104.1
UFP20
0.20 8.13 4.10
5.1 215.9 130.3
UFP22
0.20 8.50 5.13
5.1 299 128.3
UFP26
0.20 11.77 5.05
Actual backing plate may differ from drawing.
(1)

Seal AND COVER Options • UFP and HSY Flange Block Backing Plate Dimensions
E
C
Table C-50. HSY Backing Plate Dimensions

Cover Part No. A C E
mm mm mm
in. in. in.
5.1 108.0 68.3
HSY10
0.20 4.25 2.69
5.1 120.1 74.7
HSY11
0.20 4.73 2.94
6.4 133.4 81.0
HSY13
0.25 5.25 3.19
6.4 133.4 81.0
HSY14
0.25 5.25 3.19
6.4 155.7 93.7
HSY15
0.25 6.13 3.69
8.9 155.7 93.7
HSY16
0.35 6.13 3.69
5.1 181.1 106.4
HSY18
0.20 7.13 4.19
7.6 181.1 106.4
HSY19
0.30 7.13 4.19
5.1 199.9 119.1
HSY20
0.20 7.87 4.69
7.6 254.0 131.8
HSY22
0.30 10.00 5.19

V-Lock® SERIES
V-LOCK® SERIES
The V-Lock ® locking mechanism (U.S. Pat. No. 7344313) You Have Choices
evenly distributes force on the shaft, helping eliminate fretting
For the V-Lock series, you can select either single-nut or double-
corrosion. V-Lock provides maximum holding power and
nut versions and choose from many seal configurations and
prevents overtightening.
housing styles, which are shown on page C-74.
In response to customer input, V-Lock was specifically designed
to address common spherical roller bearing solid-block housed
Housings
unit problems:
• Reliable mechanical withdrawal. • Two-bolt pillow blocks.

• Preset spherical inner ring radial internal clearances (feeler • Four-bolt pillow blocks.
gages are not required). • Flange blocks.
• Quick installation (typically 10 minutes or less). • Piloted flange cartridges.
• Highest shaft-holding power. • Cartridge blocks.
• Works well in high-speed applications where shaft • Take-up blocks.
centering is an issue.
Seals
• Labyrinth: DuPont Teflon (T).
• Triple-lip: nitrile rubber (M), urethane (O) and
DuPont Viton (N).
• Double-lip: nitrile rubber (B) and DuPont Viton (C).

• Steel and urethane closed-end covers (CS).
• Steel and urethane open-end covers (CV) with:
• DuPont Teflon (T).
• Triple-lip seal (DR).
Fig. C-41. V-Lock® series insert. • V-ring seal (VR).
Relief Valve Double-Tapered Inner Ring

Wedge
Grease Fitting
Clamping Nut
Sleeve
Fig. C-42. V-Lock series cutaway view shown

with double-nut (QVV) insert.

V-Lock SERIES
V-Lock Series (Adapter Lock) U.S. Pat. No. 7344313

Primary Seals Secondary Seals and Covers
Open-End HSY Flange Cartridge
Cover Backing Plate
Closed-End UFP
Housing Type M N O B C T DR VR T Cover DR Backing Plate
Pillow Block • • • • • • • • • •
Flange Block • • • • • • • • • •
V-Lock®
(Timken Exclusive Piloted Flange
Double Taper Cartridge • • • • • • • • • •
Lock)
Take-Up Block • • • • • • • • • •
Cartridge Block • • • • • • • • • •
Pillow Block • • • • • • • • • •
Flange Block • • • • • • • • • • •
Piloted Flange
CL Series Cartridge • • • • • • • • • • •
(Set Screw Lock)
Take-Up Block • • • • • • • • • •
Hangar Block • • • • • • • • • •
Pillow Block • • • • • • • • • •
Flange Block • • • • • • • • • • •
Piloted Flange
EC Series Cartridge • • • • • • • • • • •
(Eccentric Lock)
Take-Up Block • • • • • • • • • •
Hangar Block • • • • • • • • • •
Pillow Block • • • • • • • • • •
TA Series Flange Block • • • • • • • • • •

(Tapered Adapter
Lock) Piloted Flange
Cartridge • • • • • • • • • •
Pillow Block • • • • • • • • • •
DV Series
(Tapered Adapter Flange Block • • • • • • • • • •
Lock)
Piloted Flange
Cartridge • • • • • • • • • •

V-Lock SERIES • QVVP Two-Bolt Pillow Blocks – Straight Bore Equivalent
QVVP Two-Bolt Pillow Blocks – Straight Bore Equivalent
Bearing Shaft Bearing

A B C D min. D max. F G H J L Rvv Svv Wt.
Part No.(1) Dia. No.
mm mm mm mm mm mm mm mm mm mm mm mm mm kg
in. in. in. in. in. in. in. in. in. in. in. in. in. lbs.
QVVP11V115S 1 15 ⁄ 16 in.
57.2 122.2 75.9 152.4 181.1 225.6 62.0 31.8 16 82.0 20.1 102.1 6.4
QVVP11V200S 2 in. 22211 5⁄8
2.25 4.81 2.99 6.00 7.13 8.88 2.44 1.25 3.23 0.79 4.02 14
QVVP11V050S 50 mm
QVVP12V203S 2 3 ⁄ 16 in.
63.5 133.4 80.3 165.1 200.2 244.6 66.8 31.8 16 84.6 17.8 102.1 7.7
QVVP12V204S 2 1 ⁄ 4 in. 22212 5⁄8
2.50 5.25 3.16 6.50 7.88 9.63 2.63 1.25 3.33 0.70 4.02 17
QVVP12V055S 55 mm
QVVP14V060S 60 mm
QVVP14V207S 2 7 ⁄ 16 in. 69.9 147.3 94.0 174.8 219.2 260.4 73.7 35.1 16 88.9 15.2 103.9 10.0
22214 5⁄8
QVVP14V208S 2 1 ⁄ 2 in. 2.75 5.80 3.70 6.88 8.63 10.25 2.90 1.38 3.50 0.60 4.09 22
QVVP14V065S 65 mm
QVVP16V211S 2 11 ⁄ 16 in.
QVVP16V212S 2 3 ⁄ 4 in.
QVVP16V070S 70 mm 79.5 164.3 106.4 200.2 244.6 295.4 76.2 35.1 20 91.2 15.0 106.2 12.7
22216 3⁄4
QVVP16V215S 2 15 ⁄ 16 in. 3.13 6.47 4.19 7.88 9.63 11.63 3.00 1.38 3.59 0.59 4.18 28
QVVP16V300S 3 in.
QVVP16V075S 75 mm
QVVP19V303S 3 3 ⁄ 16 in.
QVVP19V304S 3 1 ⁄ 4 in.
QVVP19V080S 80 mm
95.3 195.3 124.5 238.3 285.8 342.9 86.6 47.8 24 102.1 15.5 117.6 20.4
QVVP19V085S 85 mm 22219 7⁄8
3.75 7.69 4.90 9.38 11.25 13.50 3.41 1.88 4.02 0.61 4.63 45
QVVP19V307S 3 7 ⁄ 16 in.
QVVP19V308S 3 1 ⁄ 2 in.
QVVP19V090S 90 mm
QVVP22V311S 3 11 ⁄ 16 in.
QVVP22V312S 3 3 ⁄ 4 in.
104.9 219.7 139.7 255.0 320.0 362.0 102.6 50.8 24 116.6 14.0 130.3 26.8
QVVP22V100S 100 mm 22222
4.13 8.65 5.50 10.04 12.60 14.25 4.04 2.00 1 4.59 0.55 5.13 59
QVVP22V315S 3 15 ⁄ 16 in.
QVVP22V400S 4 in.
Double-nut (QVV) part number shown. Single-nut (QV) version available upon request.
(1)

V-Lock SERIES • QVVPL Two-Bolt Pillow Blocks – Straight Bore Equivalent
QVVPL Two-Bolt Pillow Blocks – Straight Bore Equivalent

QVVPL11V115S 1 15 ⁄ 16 in.
57.2 122.2 75.9 150.6 161.5 212.9 62.0 31.8 16 82.0 20.1 102.1 6.4
QVVPL11V200S 2 in. 22211 5⁄8
2.25 4.81 2.99 5.93 6.36 8.38 2.44 1.25 3.23 0.79 4.02 14
QVVPL11V050S 50 mm
QVVPL12V203S 2 3 ⁄ 16 in.
63.5 133.4 80.3 165.1 179.3 225.6 65.5 31.8 16 83.8 18.3 102.1 7.7
QVVPL12V204S 2 1 ⁄ 4 in. 22212 5⁄8
2.50 5.25 3.16 6.50 7.06 8.88 2.58 1.25 3.30 0.72 4.02 17
QVVPL12V055S 55 mm
QVVPL14V060S 60 mm
QVVPL14V207S 2 7 ⁄ 16 in. 69.9 147.3 94.0 173 189.0 235.0 73.7 35.1 16 88.9 15.2 103.9 10.0
22214 5⁄8
QVVPL14V208S 2 1 ⁄ 2 in. 2.75 5.80 3.70 6.81 7.44 9.25 2.90 1.38 3.50 0.60 4.09 22
QVVPL14V065S 65 mm
QVVPL16V211S 2 11 ⁄ 16 in.
QVVPL16V212S 2 3 ⁄ 4 in.
QVVPL16V070S 70 mm 82.6 167.4 106.4 195.6 213.4 265.2 76.2 35.1 20 91.2 15.0 106.2 12.7
22216 3⁄4
QVVPL16V215S 2 15 ⁄ 16 in. 3.25 6.59 4.19 7.70 8.40 10.44 3.00 1.38 3.59 0.59 4.18 28
QVVPL16V300S 3 in.
QVVPL16V075S 75 mm
QVVPL19V303S 3 3 ⁄ 16 in.
QVVPL19V304S 3 1 ⁄ 4 in.
QVVPL19V080S 80 mm
95.3 195.3 124.5 235.0 273.1 330.2 86.6 47.8 24 102.1 15.5 117.6 20.4
QVVPL19V085S 85 mm 22219 7⁄8
3.75 7.69 4.90 9.25 10.75 13.00 3.41 1.88 4.02 0.61 4.63 45
QVVPL19V307S 3 7 ⁄ 16 in.
QVVPL19V308S 3 1 ⁄ 2 in.
QVVPL19V090S 90 mm
QVVPL22V311S 3 11 ⁄ 16 in.
QVVPL22V312S 3 3 ⁄ 4 in.
108 223 139.7 255.0 320.0 362.0 102.6 53.8 24 116.6 14.0 130.3 26.8
QVVPL22V100S 100 mm 22222
4.25 8.78 5.50 10.04 12.60 14.25 4.04 2.12 1 4.59 0.55 5.13 59
QVVPL22V315S 3 15 ⁄ 16 in.
QVVPL22V400S 4 in.
(1)

V-Lock SERIES • QVVPA SAF Two-Bolt Pillow Blocks – Tapered Bore Equivalent
QVVPA SAF Two-Bolt Pillow Blocks – Tapered Bore Equivalent

QVVPA13V203S 2 3 ⁄ 16 in.
76.2 151.1 80.3 182.9 233.7 261.9 68.6 31.2 16 85.3 16.8 102.1 10.4
QVVPA13V204S 2 1 ⁄ 4 in. 22213 5⁄8
3.00 5.95 3.16 7.20 9.20 10.31 2.70 1.23 3.36 0.66 4.02 23
QVVPA13V055S 55 mm
QVVPA15V060S 60 mm
QVVPA15V207S 2 7 ⁄ 16 in. 82.6 163.3 94.0 200.2 244.6 276.4 68.6 31.8 16 86.4 17.8 103.9 12.2
22215 5⁄8
QVVPA15V208S 2 1 ⁄ 2 in. 3.25 6.43 3.70 7.88 9.63 10.88 2.70 1.25 3.40 0.70 4.09 27
QVVPA15V065S 65 mm
QVVPA17V211S 2 11 ⁄ 16 in.
QVVPA17V212S 2 3 ⁄ 4 in.
QVVPA17V070S 70 mm 95.3 186 106.4 241.3 279.4 320.8 76.2 33.8 20 91.2 15.0 106.2 15.0
22217 3⁄4
QVVPA17V215S 2 15 ⁄ 16 in. 3.75 7.32 4.19 9.50 11.00 12.63 3.00 1.33 3.59 0.59 4.18 33
QVVPA17V300S 3 in.
QVVPA17V075S 75 mm
QVVPA20V303S 3 3 ⁄ 16 in.
QVVPA20V304S 3 1 ⁄ 4 in.
QVVPA20V080S 80 mm
114.3 219.2 124.5 276.4 327.2 368.3 86.9 41.4 24 102.4 15.5 117.6 29.5
QVVPA20V085S 85 mm 22220 7⁄8
4.50 8.63 4.90 10.88 12.88 14.50 3.42 1.63 4.03 0.61 4.63 65
QVVPA20V307S 3 7 ⁄ 16 in.
QVVPA20V308S 3 1 ⁄ 2 in.
QVVPA20V090S 90 mm
QVVPA22V311S 3 11 ⁄ 16 in.
QVVPA22V312S 3 3 ⁄ 4 in.
125.5 240.5 139.7 317.5 368.3 406.4 100.6 50.8 24 115.6 15.0 130.3 38.1
QVVPA22V100S 100 mm 22222 7⁄8
4.94 9.47 5.50 12.50 14.50 16.00 3.96 2.00 4.55 0.59 5.13 84
QVVPA22V315S 3 15 ⁄ 16 in.
QVVPA22V400S 4 in.
QVVPA26V110S 110 mm
QVVPA26V407S 4 7 ⁄ 16 in. 152.4 284.0 174.8 362.0 400.1 444.5 128 51.8 24 153.2 25.1 178.3 61.7
22226
QVVPA26V408S 4 1 ⁄ 2 in. 6.00 11.18 6.88 14.25 15.75 17.50 5.04 2.04 1 6.03 0.99 7.02 136
QVVPA26V115S 115 mm
QVVPA28V125S 125 mm
QVVPA28V415S 4 15 ⁄ 16 in. 152.4 290.8 190.0 384.3 447.8 499.9 85.6 51.8 30 132.0 46.5 178.3 61.8
22228
QVVPA28V500S 5 in. 6.00 11.45 7.48 15.13 17.63 19.68 3.37 2.04 1 1⁄4 5.20 1.83 7.02 136
QVVPA28V130S 130 mm
(1)

V-Lock SERIES • QVVPN SN-STYLE Two-Bolt Pillow Blocks – Tapered Bore Equivalent
QVVPN SN-STYLE Two-Bolt Pillow Blocks – Tapered Bore Equivalent

QVVPN11V115S 1 15 ⁄ 16 in.
69.9 135.4 75.9 165.1 221.0 251.0 60.5 31.8 16 81.3 20.8 102.1 7.7
QVVPN11V200S 2 in. 22211 5⁄8
2.750 5.33 2.99 6.50 8.70 9.88 2.38 1.25 3.20 0.82 4.02 17
QVVPN11V050S 50 mm
70.0 140.5 80.0 177.8 219.2 254.0 60.5 31.8 16 81.3 20.8 102.1 9.1
QVVPN12V055S 55 mm 22212 5⁄8
2.756 5.53 3.15 7.00 8.63 10.00 2.38 1.25 3.20 0.82 4.02 20
QVVPN13V203S 2 3 ⁄ 16 in. 80.0 154.9 80.3 182.9 233.7 261.9 68.6 35.1 16 85.3 16.8 102.1 10.4
22213 5⁄8
QVVPN13V204S 2 1 ⁄ 4 in. 3.150 6.10 3.16 7.20 9.20 10.31 2.70 1.38 3.36 0.66 4.02 23
80.0 154.9 94.0 182.9 233.7 261.9 68.6 35.1 16 86.4 17.8 104.0 10.4
QVVPN14V060S 60 mm 22214 5⁄8
3.150 6.10 3.70 7.20 9.20 10.31 2.70 1.38 3.40 0.70 4.09 23
QVVPN15V207S 2 7 ⁄ 16 in.
80.0 160.8 94.0 200.2 244.6 276.4 68.6 29.2 16 86.4 17.8 103.9 12.2
QVVPN15V208S 2 1 ⁄ 2 in. 22215 5⁄8
3.150 6.33 3.70 7.88 9.63 10.88 2.70 1.15 3.40 0.70 4.09 27
QVVPN15V065S 65 mm
QVVPN16V211S 2 11 ⁄ 16 in.
95.0 180.3 106.0 235.0 266.7 315.0 72.6 31.8 20 89.4 16.8 106.0 13.6
QVVPN16V212S 2 3 ⁄ 4 in. 22216 3⁄4
3.74 7.10 4.17 9.25 10.50 12.40 2.86 1.25 3.52 0.66 4.17 30
QVVPN16V070S 70 mm
QVVPN17V215S 2 15 ⁄ 16 in.
95.3 185.9 106.4 241.3 279.4 320.8 76.2 33.8 20 91.2 15.0 106.2 15.0
QVVPN17V300S 3 in. 22217 3⁄4
3.750 7.32 4.19 9.50 11.00 12.63 3.00 1.33 3.59 0.59 4.18 33
QVVPN17V075S 75 mm
QVVPN19V303S 3 3 ⁄ 16 in.
100.0 195.3 124.0 285.8 295.4 346.2 79.8 38.9 20 99.1 19.3 118.1 22.2
QVVPN19V304S 3 1 ⁄ 4 in. 22219 3⁄4
3.937 7.69 4.88 11.25 11.63 13.63 3.14 1.53 3.90 0.76 4.65 49
QVVPN19V080S 80 mm
112.0 212.3 124.0 285.8 295.4 346.2 82.8 38.9 20 100.6 17.8 118.1 23.1
QVVPN19V085S 85 mm 22219 3⁄4
4.409 8.36 4.88 11.25 11.63 13.63 3.26 1.53 3.96 0.70 4.65 51
QVVPN20V307S 3 7 ⁄ 16 in.
112.0 216.9 124.5 276.4 327.2 368.3 86.9 38.9 24 102.4 15.5 117.6 29.5
QVVPN20V308S 3 1 ⁄ 2 in. 22220 7⁄8
4.409 8.54 4.90 10.88 12.88 14.50 3.42 1.53 4.03 0.61 4.63 65
QVVPN20V090S 90 mm
QVVPN22V311S 3 11 ⁄ 16 in.
QVVPN22V312S 3 3 ⁄ 4 in.
125.0 240.5 139.7 317.5 368.3 406.4 100.6 50.8 24 115.6 15.0 130.3 38.1
QVVPN22V100S 100 mm 22222 7⁄8
4.921 9.47 5.50 12.50 14.50 16.00 3.96 2.00 4.55 0.59 5.13 84
QVVPN22V315S 3 15 ⁄ 16 in.
QVVPN22V400S 4 in.
140.0 262.9 174.8 344.4 355.6 409.7 97.8 50.8 24 138.2 40.4 178.3 49.9
QVVPN24V110S 110 mm 22224 7⁄8
5.512 10.35 6.88 13.56 14.00 16.13 3.85 2.00 5.44 1.59 7.02 110
QVVPN26V407S 4 7 ⁄ 16 in.
150.0 281.7 174.8 367.3 400.1 444.5 128.0 49.3 24 153.2 25.1 178.3 61.7
QVVPN26V408S 4 1 ⁄ 2 in. 22226
5.906 11.09 6.88 14.46 15.75 17.50 5.04 1.94 1 6.03 0.99 7.02 136
QVVPN26V115S 115 mm
QVVPN28V125S 125 mm
QVVPN28V415S 4 15 ⁄ 16 in. 150.0 288.5 190.0 384.3 447.8 499.9 85.6 49.3 30 132.0 46.5 178.3 61.8
22228
QVVPN28V500S 5 in. 5.906 11.36 7.48 15.13 17.63 19.68 3.37 1.94 1 1⁄4 5.20 1.83 7.02 136
QVVPN28V130S 130 mm
(1)

V-Lock SERIES • QVVSN SN-STYLE Two-Bolt Pillow Blocks – Pure Metric Design
QVVSN SN-STYLE Two-Bolt Pillow Blocks – Pure Metric Design

QVVSN11V115S 1 15 ⁄ 16 in.
70 136 76 183 216 254 68 25 16 85 17 102 13.2
QVVSN11V200S 2 in. 22211 5⁄8
2.76 5.35 2.99 7.20 8.50 10.00 2.68 1.00 3.35 0.67 4.02 29
QVVSN11V050S 50 mm
QVVSN12V203S 2 3 ⁄ 16 in.
70 141 80 183 216 254 68 25 16 85 17 102 13.2
QVVSN12V204S 2 1 ⁄ 4 in. 22212 5⁄8
2.76 5.55 3.15 7.20 8.50 10.00 2.68 1.00 3.35 0.67 4.02 29
QVVSN12V055S 55 mm
QVVSN14V060S 60 mm
QVVSN14V207S 2 7 ⁄ 16 in. 80 157 94 196 235 275 74 35 16 89 15 104 16.8
22214 5⁄8
QVVSN14V208S 2 1 ⁄ 2 in. 3.15 6.18 3.70 7.72 9.25 10.83 2.91 1.38 3.50 0.59 4.09 37
QVVSN14V065S 65 mm
QVVSN16V211S 2 11 ⁄ 16 in.
QVVSN16V212S 2 3 ⁄ 4 in.
QVVSN16V070S 70 mm 95 183 106 241 279 316 76 34 20 91 15 106 20.9
22216 3⁄4
QVVSN16V215S 2 15 ⁄ 16 in. 3.74 7.2 4.17 9.49 10.98 12.44 2.99 1.33 3.58 0.59 4.17 46
QVVSN16V300S 3 in.
QVVSN16V075S 75 mm
QVVSN19V303S 3 3 ⁄ 16 in.
100 200 124 279 292 345 86 39 20 102 16 118 25.4
QVVSN19V304S 3 1 ⁄ 4 in. 22219 3⁄4
3.94 7.87 4.88 10.98 11.50 13.58 3.39 1.53 4.02 0.63 4.65 56
QVVSN19V080S 80 mm
112 212 124 279 292 345 86 39 20 102 16 118 25.4
QVVSN19V085S 85 mm 22219 3⁄4
4.41 8.34 4.88 10.98 11.50 13.58 3.39 1.53 4.02 0.63 4.65 56
QVVSN19V307S 3 7 ⁄ 16 in.
112 212 124 290 327 380 86 39 24 102 16 118 25.4
QVVSN19V308S 3 1 ⁄ 2 in. 22219 7⁄8
4.41 8.34 4.88 11.42 12.87 14.96 3.39 1.53 4.02 0.63 4.65 56
QVVSN19V090S 90 mm
QVVSN22V311S 3 11 ⁄ 16 in.
QVVSN22V312S 3 3 ⁄ 4 in.
125 241 140 319 366 410 101 50 24 116 15 130 35.8
QVVSN22V100S 100 mm 22222 7⁄8
4.92 9.49 5.51 12.56 14.41 16.14 3.98 2.00 4.57 0.59 5.12 79
QVVSN22V315S 3 15 ⁄ 16 in.
QVVSN22V400S 4 in.
140 270 175 332 365 410 113 39 24 146 33 178 39.9
QVVSN26V110S 110 mm 22226 7⁄8
5.51 10.63 6.89 13.07 14.37 16.14 4.45 1.53 5.75 1.30 7.01 88
QVVSN26V407S 4 7 ⁄ 16 in.
150 280 175 367 400 445 113 49 24 146 33 178 39.9
QVVSN26V408S 4 1 ⁄ 2 in. 22226 7⁄8
5.91 11.02 6.89 14.45 15.75 17.52 4.45 1.92 5.75 1.30 7.01 88
QVVSN26V115S 115 mm
QVVSN28V125S 125 mm
QVVSN28V415S 4 15 ⁄ 16 in. 150 290 190 402 435 500 117 49 30 148 31 178 39.9
22228
QVVSN28V500S 5 in. 5.91 11.41 7.48 15.83 17.13 19.68 4.61 1.92 1 1⁄4 5.83 1.22 7.01 88
QVVSN28V130S 130 mm
(1)

V-Lock SERIES • QVVPKT 9000 SERIES Two-Bolt Pillow Blocks – Tapered Bore Equivalent
QVVPKT 9000 SERIES Two-Bolt Pillow Blocks – Tapered Bore Equivalent

QVVPKT13V203S 2 3 ⁄ 16 in.
76.2 153.7 80.3 194.6 223.0 285.8 73.7 35.1 20 87.9 14.2 102.1 10.0
QVVPKT13V204S 2 1 ⁄ 4 in. 22213 3⁄4
3.00 6.05 3.16 7.66 8.78 11.25 2.90 1.38 3.46 0.56 4.02 22
QVVPKT13V055S 55 mm
QVVPKT15V060S 60 mm
QVVPKT15V207S 2 7 ⁄ 16 in. 88.9 173.7 94.0 230.1 265.2 330.2 75.7 35.1 24 89.9 14.2 103.9 12.7
22215 7⁄8
QVVPKT15V208S 2 1 ⁄ 2 in. 3.50 6.84 3.70 9.06 10.44 13.00 2.98 1.38 3.54 0.56 4.09 28
QVVPKT15V065S 65 mm
(1)

V-Lock SERIES • QVVPF Four-Bolt Pillow Blocks – Straight Bore Equivalent
QVVPF Four-Bolt Pillow Blocks – Straight Bore Equivalent

A B C D min. D max. E F G H J L Rvv Svv Wt.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm kg
in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs.
QVVPF14V060S 60 mm
QVVPF14V207S 2 7 ⁄ 16 in. 69.9 147.3 94.0 174.8 193.8 44.5 235.0 76.2 24.9 16 90.2 15.2 103.9 9.1
22214 5⁄8
QVVPF14V208S 2 1 ⁄ 2 in. 2.75 5.80 3.70 6.88 7.63 1.75 9.25 3.00 0.98 3.55 0.60 4.09 20
QVVPF14V065S 65 mm
QVVPF16V211S 2 11 ⁄ 16 in.
QVVPF16V212S 2 3 ⁄ 4 in.
QVVPF16V070S 70 mm 82.6 167.4 106.4 193.0 231.1 47.8 265.2 79.5 32.8 16 93.0 15.2 106.2 12.2
22216 5⁄8
QVVPF16V215S 2 15 ⁄ 16 in. 3.25 6.59 4.19 7.60 9.10 1.88 10.44 3.13 1.29 3.66 0.60 4.18 27
QVVPF16V300S 3 in.
QVVPF16V075S 75 mm
QVVPF19V303S 3 3 ⁄ 16 in.
QVVPF19V304S 3 1 ⁄ 4 in.
QVVPF19V080S 80 mm
95.3 195.3 124.5 225.6 276.4 50.8 312.4 95.3 39.6 20 106.4 14.5 117.6 22.2
QVVPF19V085S 85 mm 22219 3⁄4
3.75 7.69 4.90 8.88 10.88 2.00 12.30 3.75 1.56 4.19 0.57 4.63 49
QVVPF19V307S 3 7 ⁄ 16 in.
QVVPF19V308S 3 1 ⁄ 2 in.
QVVPF19V090S 90 mm
QVVPF22V311S 3 11 ⁄ 16 in.
QVVPF22V312S 3 3 ⁄ 4 in.
108.0 223.0 139.7 276.4 339.9 57.2 378.0 109.5 35.6 20 119.9 14.7 130.3 30.4
QVVPF22V100S 100 mm 22222 3⁄4
4.25 8.78 5.50 10.88 13.38 2.25 14.88 4.31 1.40 4.72 0.58 5.13 67
QVVPF22V315S 3 15 ⁄ 16 in.
QVVPF22V400S 4 in.
QVVPF26V110S 110 mm
QVVPF26V407S 4 7 ⁄ 16 in. 120.7 250.7 174.8 301.8 368.3 63.5 409.7 120.7 40.1 20 149.6 32.8 178.3 37.2
22226 3⁄4
QVVPF26V408S 4 1 ⁄ 2 in. 4.75 9.87 6.88 11.88 14.50 2.50 16.13 4.75 1.58 5.89 1.29 7.02 82
QVVPF26V115S 115 mm
QVVPF28V125S 125 mm
QVVPF28V415S 4 15 ⁄ 16 in. 139.7 279.7 190.0 349.3 403.4 69.9 444.5 128.0 39.1 24 153.2 31.5 178.3 60.8
22228 7⁄8
QVVPF28V500S 5 in. 5.50 11.01 7.48 13.75 15.88 2.75 17.50 5.04 1.54 6.03 1.24 7.02 134
QVVPF28V130S 130 mm
(1)

V-Lock SERIES • QVVPR Four-Bolt Pillow Blocks – Straight Bore Equivalent
QVVPR Four-Bolt Pillow Blocks – Straight Bore Equivalent

QVVPR14V060S 60 mm
QVVPR14V207S 2 7 ⁄ 16 in. 69.9 147.3 94.0 181.1 222.2 47.8 260.4 82.6 24.9 16 93.2 15.2 103.9 9.1
22214 5⁄8
QVVPR14V208S 2 1 ⁄ 2 in. 2.75 5.80 3.70 7.13 8.75 1.88 10.25 3.25 0.98 3.67 0.60 4.09 20
QVVPR14V065S 65 mm
QVVPR16V211S 2 11 ⁄ 16 in.
QVVPR16V212S 2 3 ⁄ 4 in.
QVVPR16V070S 70 mm 79.5 164.3 106.4 203.2 243.8 54.1 275.1 85.9 29.5 16 96.0 15.2 106.2 12.2
22216 5⁄8
QVVPR16V215S 2 15 ⁄ 16 in. 3.13 6.47 4.19 8.00 9.60 2.13 10.83 3.38 1.16 3.78 0.60 4.18 27
QVVPR16V300S 3 in.
QVVPR16V075S 75 mm
QVVPR19V303S 3 3 ⁄ 16 in.
QVVPR19V304S 3 1 ⁄ 4 in.
QVVPR19V080S 80 mm
95.3 195.3 124.5 235.0 285.8 60.5 346.2 95.3 39.6 20 106.4 14.5 117.6 22.2
QVVPR19V085S 85 mm 22219 3⁄4
3.75 7.69 4.90 9.25 11.25 2.38 13.63 3.75 1.56 4.19 0.57 4.63 49
QVVPR19V307S 3 7 ⁄ 16 in.
QVVPR19V308S 3 1 ⁄ 2 in.
QVVPR19V090S 90 mm
(1)

V-Lock SERIES • QVVPX 5000 SERIES Four-Bolt Pillow Blocks – Straight Bore Equivalent
QVVPX 5000 SERIES Four-Bolt Pillow Blocks – Straight Bore Equivalent

QVVPX14V060S 60 mm
QVVPX14V207S 2 7 ⁄ 16 in. 76.2 153.7 94.0 176.3 242.8 66.8 285.8 98.6 31.0 16 101.3 15.2 103.9 10.4
22214 5⁄8
QVVPX14V208S 2 1 ⁄ 2 in. 3.00 6.05 3.70 6.94 9.56 2.63 11.25 3.88 1.22 3.99 0.60 4.09 23
QVVPX14V065S 65 mm
QVVPX16V211S 2 11 ⁄ 16 in.
QVVPX16V212S 2 3 ⁄ 4 in.
QVVPX16V070S 70 mm 88.9 173.5 106.4 230.1 265.2 69.9 330.2 108.0 39.1 20 107.2 14.2 106.2 12.7
22216 3⁄4
QVVPX16V215S 2 15 ⁄ 16 in. 3.50 6.83 4.19 9.06 10.44 2.75 13.00 4.25 1.54 4.22 0.56 4.18 28
QVVPX16V300S 3 in.
QVVPX16V075S 75 mm
QVVPX19V303S 3 3 ⁄ 16 in.
QVVPX19V304S 3 1 ⁄ 4 in.
QVVPX19V080S 80 mm
101.6 201.2 124.5 274.6 309.6 76.2 381.0 120.7 38.1 20 119.1 14.5 117.6 22.2
QVVPX19V085S 85 mm 22219 3⁄4
4.00 7.92 4.90 10.81 12.19 3.00 15.00 4.75 1.50 4.69 0.57 4.63 49
QVVPX19V307S 3 7 ⁄ 16 in.
QVVPX19V308S 3 1 ⁄ 2 in.
QVVPX19V090S 90 mm
QVVPX22V311S 3 11 ⁄ 16 in.
QVVPX22V312S 3 3 ⁄ 4 in.
127.0 239.8 139.7 317.5 355.6 88.9 425.5 139.7 41.4 24 135.1 15.2 130.3 30.4
QVVPX22V315S 3 15 ⁄ 16 in. 22222 7⁄8
5.00 9.44 5.50 12.50 14.00 3.50 16.75 5.50 1.63 5.32 0.60 5.13 67
QVVPX22V400S 4 in.
QVVPX22V100S 100 mm
QVVPX26V110S 110 mm
QVVPX26V407S 4 7 ⁄ 16 in. 146.1 273.8 174.8 354.1 395.2 101.6 469.9 158.8 45.7 24 168.7 38.4 178.3 37.2
22226
QVVPX26V408S 4 1 ⁄ 2 in. 5.75 10.78 6.88 13.94 15.56 4.00 18.50 6.25 1.80 1 6.64 1.51 7.02 82
QVVPX26V115S 115 mm
QVVPX28V125S 125 mm
QVVPX28V415S 4 15 ⁄ 16 in. 155.6 293.4 190.0 387.4 452.5 108.0 514.4 171.5 50.8 24 175.0 30.7 178.3 61.7
22228
QVVPX28V500S 5 in. 6.125 11.55 7.48 15.25 16.75 4.25 20.25 6.75 2.00 1 1⁄8 6.89 1.21 7.02 136
QVVPX28V130S 130 mm
(1)

V-Lock SERIES • QVVPXT 5000 SERIES Two-Bolt Pillow Blocks – Straight Bore Equivalent
QVVPXT 5000 SERIES Two-Bolt Pillow Blocks – Straight Bore Equivalent

Part No.(1) Size No.
mm mm mm mm mm mm mm mm mm mm mm mm kg
in. in. in. in. in. in. in. in. in. in. in. in. lbs.
QVVPXT14V060S 60 mm
QVVPXT14V207S 2 7 ⁄ 16 in. 76.2 153.7 94.0 194.6 233.0 285.8 73.7 35.1 20 88.9 15.2 103.9 10.0
22214 3⁄4
QVVPXT14V208S 2 1 ⁄ 2 in. 3.00 6.05 3.70 7.66 8.78 11.25 2.90 1.38 3.50 0.60 4.09 22
QVVPXT14V065S 65 mm
QVVPXT16V211S 2 11 ⁄ 16 in.
QVVPXT16V212S 2 3 ⁄ 4 in.
QVVPXT16V070S 70 mm 88.9 173.7 106.4 230.1 265.2 330.2 75.7 35.1 24 90.9 15.2 106.2 12.7
22216 7⁄8
QVVPXT16V215S 2 15 ⁄ 16 in. 3.50 6.84 4.19 9.06 10.44 13.00 2.98 1.38 3.58 0.60 4.18 28
QVVPXT16V300S 3 in.
QVVPXT16V075S 75 mm
(1)

V-Lock SERIES • QVVPG SN-STYLE Four-Bolt Pillow Blocks – Tapered Bore Equivalent
QVVPG SN-STYLE Four-Bolt Pillow Blocks – Tapered Bore Equivalent

QVVPG11V115S 1 15 ⁄ 16 in.
69.9 134.9 75.9 182.4 217.4 39.9 251.0 68.6 31.8 16 85.3 20.8 102.1 8.6
QVVPG11V200S 2 in. 22211 5⁄8
2.75 5.31 2.99 7.18 8.56 1.57 9.88 2.70 1.25 3.36 0.82 4.02 19
QVVPG11V050S 50 mm
70.0 140.5 80.0 177.8 219.2 35.1 254.0 69.9 31.8 12 86.1 20.8 102.1 9.9
QVVPG12V055S 55 mm 22212 1⁄2
2.756 5.53 3.15 7.00 8.63 1.38 10.00 2.75 1.25 3.39 0.82 4.02 22
QVVPG13V203S 2 3 ⁄ 16 in. 80.0 154.9 80.3 182.4 217.4 48.0 261.9 82.6 35.1 16 92.5 17.0 102.1 11.3
22213 5⁄8
QVVPG13V204S 2 1 ⁄ 4 in. 3.15 6.10 3.16 7.18 8.56 1.89 10.31 3.25 1.38 3.64 0.67 4.02 25
80.0 154.9 94.0 182.4 217.4 48.0 261.9 82.6 35.1 16 93.2 86.1 103.9 11.3
QVVPG14V060S 60 mm 22214 5⁄8
3.15 6.10 3.70 7.18 8.56 1.89 10.31 3.25 1.38 3.67 3.39 4.09 25
QVVPG15V207S 2 7 ⁄ 16 in.
80.0 162.1 94.0 201.7 246.1 39.6 276.4 79.5 30.2 16 91.7 15.7 103.9 13.2
QVVPG15V208S 2 1 ⁄ 2 in. 22215 5⁄8
3.15 6.38 3.70 7.94 9.69 1.56 10.88 3.13 1.19 3.61 0.62 4.09 29
QVVPG15V065S 65 mm
QVVPG16V211S 2 11 ⁄ 16 in.
95.0 180.3 105.9 235.0 266.7 50.0 315.0 89.9 31.8 16 98.0 16.8 105.9 14.9
QVVPG16V212S 2 3 ⁄ 4 in. 22216 5⁄8
3.74 7.10 4.17 9.25 10.50 1.97 12.4 3.54 1.25 3.86 0.66 4.17 33
QVVPG16V070S 70 mm
QVVPG17V215S 2 15 ⁄ 16 in.
95.0 182.9 106.4 240.0 287.3 52.3 320.8 92.2 31.8 20 99.3 15.0 106.2 16.8
QVVPG17V300S 3 in. 22217 3⁄4
3.74 7.20 4.19 9.44 11.31 2.06 12.63 3.63 1.25 3.91 0.59 4.18 37
QVVPG17V075S 75 mm
QVVPG19V303S 3 3 ⁄ 16 in.
100.0 195.3 124.0 282.7 298.5 50.0 344.9 100.1 39.6 16 109.2 19.3 118.1 24.5
QVVPG19V304S 3 1 ⁄ 4 in. 22219 5⁄8
3.937 7.69 4.88 11.13 11.75 1.97 13.58 3.94 1.56 4.30 0.76 4.65 54
QVVPG19V080S 80 mm
112.0 212.3 124.0 282.7 298.5 50.0 344.9 100.1 39.6 16 109.2 17.8 118.1 25.4
QVVPG19V085S 85 mm 22219 5⁄8
4.409 8.36 4.88 11.13 11.75 1.97 13.58 3.94 1.56 4.30 0.70 4.65 56
QVVPG20V307S 3 7 ⁄ 16 in.
112.0 214.6 124.5 276.4 339.9 60.5 381.0 109.5 39.6 20 113.5 11.2 117.6 31.8
QVVPG20V308S 3 1 ⁄ 2 in. 22220 3⁄4
4.409 8.45 4.90 10.88 13.38 2.38 15.00 4.31 1.56 4.47 0.44 4.63 70
QVVPG20V090S 90 mm
QVVPG22V311S 3 11 ⁄ 16 in.
QVVPG22V312S 3 3 ⁄ 4 in.
125.0 238.3 139.7 301.8 368.3 69.9 409.7 120.7 44.5 20 125.5 14.5 130.3 39.5
QVVPG22V100S 100 mm 22222 3⁄4
4.921 9.38 5.50 11.88 14.50 2.75 16.13 4.75 1.75 4.94 0.57 5.13 87
QVVPG22V315S 3 15 ⁄ 16 in.
QVVPG22V400S 4 in.
140.0 262.9 174.8 342.9 355.6 70.1 410.0 120.7 50.8 16 149.6 40.4 178.3 49.9
QVVPG24V110S 110 mm 22224 5⁄8
5.512 10.35 6.88 13.50 14.00 2.76 16.14 4.75 2.00 5.89 1.59 7.02 110
QVVPG26V407S 4 7 ⁄ 16 in.
150.0 281.7 174.8 367.3 400.1 81.0 444.5 128.0 49.3 24 153.2 36.6 178.3 61.7
QVVPG26V408S 4 1 ⁄ 2 in. 22226
5.906 11.09 6.88 14.46 15.75 3.19 17.50 5.04 1.94 1 6.03 1.44 7.02 136
QVVPG26V115S 115 mm
QVVPG28V125S 125 mm
QVVPG28V415S 4 15 ⁄ 16 in. 150.0 288.5 190.0 384.3 447.8 80.0 500.4 128.0 49.3 24 152.9 31.8 178.3 61.7
22228
QVVPG28V500S 5 in. 5.906 11.36 7.48 15.13 17.63 3.15 19.70 5.04 1.94 1 6.02 1.25 7.02 136
QVVPG28V130S 130 mm
(1)

V-Lock SERIES • QVVPH SAF-STYLE Four-Bolt Pillow Blocks – Tapered Bore Equivalent
QVVPH SAF-STYLE Four-Bolt Pillow Blocks – Tapered Bore Equivalent

QVVPH11V115S 1 15 ⁄ 16 in.
69.9 134.9 75.9 182.4 217.4 39.9 251.0 68.6 31.8 16 85.3 20.8 102.1 8.6
QVVPH11V200S 2 in. 22211 5⁄8
2.75 5.31 2.99 7.18 8.56 1.57 9.88 2.70 1.25 3.36 0.82 4.02 19
QVVPH11V050S 50 mm
QVVPH13V203S 2 3 ⁄ 16 in.
76.2 151.1 80.3 182.4 217.4 50.8 261.9 82.6 31.2 12 92.5 17.0 102.1 11.3
QVVPH13V204S 2 1 ⁄ 4 in. 22213 1⁄2
3.00 5.95 3.16 7.18 8.56 2.00 10.31 3.25 1.23 3.64 0.67 4.02 25
QVVPH13V055S 55 mm
QVVPH15V060S 60 mm
QVVPH15V207S 2 7 ⁄ 16 in. 82.6 162.1 94.0 201.7 246.1 47.8 276.4 79.5 32.8 12 91.7 18.0 103.9 13.2
22215 1⁄2
QVVPH15V208S 2 1 ⁄ 2 in. 3.25 6.38 3.70 7.94 9.69 1.88 10.88 3.13 1.29 3.61 0.71 4.09 29
QVVPH15V065S 65 mm
QVVPH17V211S 2 11 ⁄ 16 in.
QVVPH17V212S 2 3 ⁄ 4 in.
QVVPH17V070S 70 mm 95.3 182.9 106.4 240.0 287.3 54.1 320.8 92.2 32.0 16 99.3 15.0 106.2 16.8
22217 5⁄8
QVVPH17V215S 2 15 ⁄ 16 in. 3.75 7.20 4.19 9.44 11.31 2.13 12.63 3.63 1.26 3.91 0.59 4.18 37
QVVPH17V300S 3 in.
QVVPH17V075S 75 mm
QVVPH20V303S 3 3 ⁄ 16 in.
QVVPH20V304S 3 1 ⁄ 4 in.
QVVPH20V080S 80 mm
114.3 216.9 124.5 276.4 339.9 60.5 381.0 109.5 41.9 20 113.5 11.2 117.6 31.8
QVVPH20V085S 85 mm 22220 3⁄4
4.50 8.54 4.90 10.88 13.38 2.38 15.00 4.31 1.65 4.47 0.44 4.63 70
QVVPH20V307S 3 7 ⁄ 16 in.
QVVPH20V308S 3 1 ⁄ 2 in.
QVVPH20V090S 90 mm
QVVPH22V311S 3 11 ⁄ 16 in.
QVVPH22V312S 3 3 ⁄ 4 in.
125.5 238.3 139.7 301.8 368.3 69.9 406.4 120.7 45.0 20 125.5 14.5 130.3 39.5
QVVPH22V100S 100 mm 22222 3⁄4
4.94 9.38 5.50 11.88 14.50 2.75 16.00 4.75 1.77 4.94 0.57 5.13 87
QVVPH22V315S 3 15 ⁄ 16 in.
QVVPH22V400S 4 in.
QVVPH26V110S 110 mm
QVVPH26V407S 4 7 ⁄ 16 in. 152.4 284.0 174.8 362.0 400.1 82.6 444.5 128.0 51.8 20 153.2 36.6 178.3 61.7
22226 3⁄4
QVVPH26V408S 4 1 ⁄ 2 in. 6.00 11.18 6.88 14.25 15.75 3.25 17.50 5.04 2.04 6.03 1.44 7.02 136
QVVPH26V115S 115 mm
QVVPH28V125S 125 mm
QVVPH28V415S 4 15 ⁄ 16 in. 152.4 290.8 190.0 406.4 435.1 85.9 500.4 128.0 51.8 24 152.9 31.8 178.3 61.7
22228
QVVPH28V500S 5 in. 6.00 11.45 7.48 16.00 17.13 3.38 19.70 5.04 2.04 1 6.02 1.25 7.02 136
QVVPH28V130S 130 mm
(1)

V-Lock SERIES • QVVPK 9000 SERIES Four-Bolt Pillow Blocks – Tapered Bore Equivalent
QVVPK 9000 SERIES Four-Bolt Pillow Blocks – Tapered Bore Equivalent

QVVPK15V060S 60 mm
QVVPK15V207S 2 7 ⁄ 16 in. 88.9 176.0 94.0 230.1 265.2 69.9 330.2 108.0 39.1 20 105.9 12.6 103.9 13.2
22215 3⁄4
QVVPK15V208S 2 1 ⁄ 2 in. 3.50 6.83 3.70 9.06 10.44 2.75 13.00 4.25 1.54 4.17 0.51 4.09 29
QVVPK15V065S 65 mm
QVVPK17V211S 2 11 ⁄ 16 in.
QVVPK17V212S 2 3 ⁄ 4 in.
QVVPK17V070S 70 mm 101.6 201.2 106.4 274.6 309.6 76.2 381.0 120.7 38.1 20 113.5 8.64 106.2 16.8
22217 3⁄4
QVVPK17V215S 2 15 ⁄ 16 in. 4.00 7.92 4.19 10.81 12.19 3.00 15.00 4.75 1.50 4.47 0.34 4.18 37
QVVPK17V300S 3 in.
QVVPK17V075S 75 mm
QVVPK20V303S 3 3 ⁄ 16 in.
QVVPK20V304S 3 1 ⁄ 4 in.
QVVPK20V080S 80 mm
127.0 240.0 124.5 317.5 355.6 88.9 425.5 139.7 41.4 24 128.8 8.9 117.6 31.8
QVVPK20V085S 85 mm 22220 7⁄8
5.00 9.44 4.90 12.50 14.00 3.50 16.75 5.50 1.63 5.07 0.35 4.63 70
QVVPK20V307S 3 7 ⁄ 16 in.
QVVPK20V308S 3 1 ⁄ 2 in.
QVVPK20V090S 90 mm
QVVPK22V311S 3 11 ⁄ 16 in.
QVVPK22V312S 3 3 ⁄ 4 in.
146.1 273.8 139.7 354.1 395.2 101.6 469.9 158.8 45.7 24 138.4 14.5 130.3 39.5
QVVPK22V100S 100 mm 22222
5.75 10.78 5.50 13.94 15.56 4.00 18.50 6.25 1.80 1 5.45 0.57 5.13 87
QVVPK22V315S 3 15 ⁄ 16 in.
QVVPK22V400S 4 in.
QVVPK26V110S 110 mm
QVVPK26V407S 4 7 ⁄ 16 in. 155.7 283.2 174.8 387.4 425.5 108.0 514.4 171.5 50.8 24 175.3 31.5 178.3 61.7
22226
QVVPK26V408S 4 1 ⁄ 2 in. 6.13 11.15 6.88 15.25 16.75 4.25 20.25 6.75 2.00 1 6.90 1.24 7.02 136
QVVPK26V115S 115 mm
(1)

V-Lock SERIES • QVF and QVVF Square Flange Blocks – Straight Bore Equivalent
QVF and QVVF Square Flange Blocks – Straight Bore Equivalent
QV Single-Nut Unit (1) QVV Double-Nut Unit (1)
Bearing Shaft Bearing L L

C D E B.C. F H J N Rv(1) Rvv Sv (1) Svv Wt.
Part No.(1)(2) Dia. No. FIX EXP
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm kg
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs.
QVF11V115S 1 15 ⁄ 16 in.
75.9 120.7 111.3 157.0 139.7 22.4 12 84.1 86.1 65.0 4.1 18.3 79.8 102.1 5.0
QVF11V200S 2 in. 22211 1⁄2
2.99 4.75 4.38 6.18 5.50 0.88 3.31 3.39 2.56 0.16 0.72 3.14 4.02 11
QVF11V050S 50 mm
QVF12V203S 2 3 ⁄ 16 in.
80.3 130.3 124.0 175.0 157.2 25.4 16 84.3 86.4 66.8 4.6 17.8 79.8 102.1 6.4
QVF12V204S 2 1 ⁄ 4 in. 22212 5⁄8
3.16 5.13 4.88 6.89 6.19 1.00 3.32 3.40 2.63 0.18 0.70 3.14 4.02 14
QVF12V055S 55 mm
QVF14V060S 60 mm
QVF14V207S 2 7 ⁄ 16 in. 94.0 146.1 136.7 193.0 168.4 25.4 16 85.1 87.1 72.4 4.1 16.0 81.0 101.3 7.7
22214 5⁄8
QVF14V208S 2 1 ⁄ 2 in. 3.70 5.75 5.38 7.60 6.63 1.00 3.35 3.43 2.85 0.16 0.63 3.19 3.99 17
QVF14V065S 65 mm
QVF16V211S 2 11 ⁄ 16 in.
QVF16V212S 2 3 ⁄ 4 in.
QVF16V070S 70 mm 106.4 168.9 152.4 215.4 189.0 26.9 20 87.6 89.7 75.7 4.1 16.3 83.6 103.6 10.4
22216 3⁄4
QVF16V215S 2 15 ⁄ 16 in. 4.19 6.65 6.00 8.48 7.44 1.06 3.45 3.53 2.98 0.16 0.64 3.29 4.08 23
QVF16V300S 3 in.
QVF16V075S 75 mm
QVF19V303S 3 3 ⁄ 16 in.
QVF19V304S 3 1 ⁄ 4 in.
QVF19V080S 80 mm
124.5 193.8 177.8 251.7 219.2 33.3 20 98.3 100.3 84.1 4.6 15.7 93.7 114.0 15.9
QVF19V085S 85 mm 22219 3⁄4
4.90 7.63 7.00 9.91 8.63 1.31 3.87 3.95 3.31 0.18 0.62 3.69 4.49 35
QVF19V307S 3 7 ⁄ 16 in.
QVF19V308S 3 1 ⁄ 2 in.
QVF19V090S 90 mm
QVF22V311S 3 11 ⁄ 16 in.
QVF22V312S 3 3 ⁄ 4 in.
139.7 224.0 196.9 278.4 253.2 38.1 24 114.0 116.1 103.1 9.1 12.7 104.9 126.7 24.9
QVF22V100S 100 mm 22222 7⁄8
5.50 8.82 7.75 10.96 9.97 1.50 4.49 4.57 4.06 0.36 0.50 4.13 4.99 55
QVF22V315S 3 15 ⁄ 16 in.
QVF22V400S 4 in.
QVF26V110S 110 mm
QVF26V407S 4 7 ⁄ 16 in. 174.8 256.8 222.3 314.5 276.4 38.1 24 140.5 142.7 106.9 7.4 37.8 147.8 178.3 28.6
22226 7⁄8
QVF26V408S 4 1 ⁄ 2 in. 6.88 10.11 8.75 12.38 10.88 1.50 5.53 5.62 4.21 0.29 1.49 5.82 7.02 63
QVF26V115S 115 mm
Bearing part numbers use QV to designate single-nut units (uses Rv and Sv dimensions) and QVV to designate double-nut units (uses Rvv and Svv dimensions).
(1)
Single-nut (QV) part number shown. Double-nut (QVV) version available upon request.
(2)

V-Lock SERIES • QVFB and QVVFB Flange Blocks – Tapered Adapter Equivalent
QVFB and QVVFB Flange Blocks – Tapered Adapter Equivalent

A B.C. C D E F G H J L N Rv (1) Rvv Sv (1) Svv Wt.
Part No.(1)(2) Dia. No.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm kg
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs.
QVFB15V060S 60 mm
QVFB15V207S 2 7 ⁄ 16 in. 255.0 215.1 94.0 169.9 152.4 192.0 25.4 23.9 16 81.5 64.8 0.8 22.4 82.6 103.9 11.3
22215 5⁄8
QVFB15V208S 2 1 ⁄ 2 in. 10.04 8.47 3.70 6.69 6.00 7.56 1.00 0.94 3.21 2.55 0.03 0.88 3.25 4.09 25
QVFB15V065S 65 mm
QVFB17V211S 2 11 ⁄ 16 in.
QVFB17V212S 2 3 ⁄ 4 in.
QVFB17V070S 70 mm 282.4 240.0 106.4 190.0 169.7 212.1 25.4 25.4 16 83.8 69.9 1.0 22.4 84.6 106.2 13.6
22217 5⁄8
QVFB17V215S 2 15 ⁄ 16 in. 11.12 9.45 4.19 7.48 6.68 8.35 1.00 1.00 3.30 2.75 0.04 0.88 3.33 4.18 30
QVFB17V300S 3 in.
QVFB17V075S 75 mm
QVFB20V303S 3 3 ⁄ 16 in.
QVFB20V304S 3 1 ⁄ 4 in.
QVFB20V080S 80 mm
330.2 279.9 124.5 230.1 197.9 247.9 31.8 28.7 20 106.7 94.2 11.4 10.9 95.3 117.3 18.1
QVFB20V085S 85 mm 22220 3⁄4
13.00 11.02 4.90 9.06 7.79 9.76 1.25 1.13 4.20 3.71 0.45 0.43 3.75 4.62 40
QVFB20V307S 3 7 ⁄ 16 in.
QVFB20V308S 3 1 ⁄ 2 in.
QVFB20V090S 90 mm
QVFB22V311S 3 11 ⁄ 16 in.
QVFB22V312S 3 3 ⁄ 4 in.
367.0 309.9 139.7 255.0 219.2 274.3 44.5 26.4 20 112.0 101.1 7.4 14.7 104.9 126.7 27.2
QVFB22V100S 100 mm 22222 3⁄4
14.45 12.20 5.50 10.04 8.63 10.80 1.75 1.04 4.41 3.98 0.29 0.58 4.13 4.99 60
QVFB22V315S 3 15 ⁄ 16 in.
QVFB22V400S 4 in.
QVFB26V110S 110 mm
QVFB26V407S 4 7 ⁄ 16 in. 416.1 355.1 174.8 290.1 251.0 298.5 41.9 32.0 24 148.3 114.3 0.5 30.0 147.8 178.3 42.6
22226 7⁄8
QVFB26V408S 4 1 ⁄ 2 in. 16.38 13.98 6.88 11.42 9.88 11.75 1.65 1.26 5.84 4.50 0.02 1.18 5.82 7.02 94
QVFB26V115S 115 mm
(1)
(2)

V-Lock SERIES • QVFC and QVVFC Piloted Flange Cartridges – Tapered Adapter Equivalent
QVFC and QVVFC Piloted Flange Cartridges –

Tapered Adapter Equivalent

A B.C. C D(3) E F G H J L N Rv (1) Rvv Sv (1) Svv Wt.
Part No.(1)(2) Dia. No.
QVFC15V060S 60 mm
QVFC15V207S 2 7 ⁄ 16 in. 255.0 215.1 94.0 169.9 152.4 192.0 25.4 23.9 16 87.1 64.8 4.6 16.8 82.6 103.9 11.3
22215 5⁄8
QVFC15V208S 2 1 ⁄ 2 in. 10.04 8.47 3.70 6.690 6.00 7.56 1.00 0.94 3.43 2.55 0.18 0.66 3.25 4.09 25
QVFC15V065S 65 mm
QVFC17V211S 2 11 ⁄ 16 in.
QVFC17V212S 2 3 ⁄ 4 in.
QVFC17V070S 70 mm 282.4 240.0 106.4 190.0 169.7 212.1 25.4 25.4 16 91.7 69.9 6.6 14.5 84.6 106.2 13.6
22217 5⁄8
QVFC17V215S 2 15 ⁄ 16 in. 11.12 9.45 4.19 7.480 6.68 8.35 1.00 1.00 3.61 2.75 0.26 0.57 3.33 4.18 30
QVFC17V300S 3 in.
QVFC17V075S 75 mm
QVFC20V303S 3 3 ⁄ 16 in.
QVFC20V304S 3 1 ⁄ 4 in.
QVFC20V080S 80 mm
330.2 279.9 124.5 230.1 197.9 247.9 31.8 28.7 20 105.2 94.2 9.7 12.4 95.3 117.3 18.1
QVFC20V085S 85 mm 22220 3⁄4
13.00 11.02 4.90 9.060 7.79 9.76 1.25 1.13 4.14 3.71 0.38 0.49 3.75 4.62 40
QVFC20V307S 3 7 ⁄ 16 in.
QVFC20V308S 3 1 ⁄ 2 in.
QVFC20V090S 90 mm
QVFC22V311S 3 11 ⁄ 16 in.
QVFC22V312S 3 3 ⁄ 4 in.
367.0 309.9 139.7 255.0 219.2 274.3 44.5 26.4 20 112.8 101.1 8.1 5.8 104.9 126.7 27.2
QVFC22V100S 100 mm 22222 3⁄4
14.45 12.20 5.50 10.040 8.63 10.80 1.75 1.04 4.44 3.98 0.32 0.23 4.13 4.99 60
QVFC22V315S 3 15 ⁄ 16 in.
QVFC22V400S 4 in.
QVFC26V110S 110 mm
QVFC26V407S 4 7 ⁄ 16 in. 416.1 355.1 174.8 290.0 251.0 298.5 41.9 32.0 24 144.3 114.3 3.6 34.0 147.8 178.3 42.6
22226 7⁄8
QVFC26V408S 4 1 ⁄ 2 in. 16.38 13.98 6.88 11.417 9.88 11.75 1.65 1.26 5.68 4.50 0.14 1.34 5.82 7.02 94
QVFC26V115S 115 mm
(1)
(2)
Pilot tolerance: +0/-0.05 mm (+0/-0.002 in.).

(3)

V-Lock SERIES • QVFL and QVVFL Square Flange Blocks – Straight Bore Equivalent
QVFL and QVVFL Square Flange Blocks – Straight Bore Equivalent

C D E B.C. F G(3) (4) (5) H J N Rv (1) Rvv Sv (1) Svv Wt.
QVFL11V115S 1 15 ⁄ 16 in.
75.9 115.3 103.4 146.1 131.8 23.1 12 82.6 84.6 61.2 2.5 19.8 79.8 102.1 5.0
QVFL11V200S 2 in. 22211 N/A 1⁄2
2.99 4.54 4.07 5.75 5.19 0.91 3.25 3.33 2.41 0.10 0.78 3.14 4.02 11
QVFL11V050S 50 mm
QVFL12V203S 2 3 ⁄ 16 in.
80.3 130.3 114.6 162.1 149.4 19.1 16 84.3 86.4 66.8 4.6 17.8 79.8 102.1 6.4
QVFL12V204S 2 1 ⁄ 4 in. 22212 N/A 5⁄8
3.16 5.13 4.51 6.38 5.88 0.75 3.32 3.40 2.63 0.18 0.70 3.14 4.02 14
QVFL12V055S 55 mm
QVFL14V060S 60 mm
QVFL14V207S 2 7 ⁄ 16 in. 94.0 146.1 121.2 171.5 157.2 25.4 16 86.1 88.1 72.6 5.1 15.2 81.0 101.3 7.7
22214 N/A 5⁄8
QVFL14V208S 2 1 ⁄ 2 in. 3.70 5.75 4.77 6.75 6.19 1.00 3.39 3.47 2.86 0.20 0.60 3.19 3.99 17
QVFL14V065S 65 mm
QVFL16V211S 2 11 ⁄ 16 in.
QVFL16V212S 2 3 ⁄ 4 in.
QVFL16V070S 70 mm 106.4 168.4 141.2 200.2 182.6 26.9 20 86.9 88.9 74.4 3.3 17.0 83.6 103.6 10.4
22216 N/A 3⁄4
QVFL16V215S 2 15 ⁄ 16 in. 4.19 6.63 5.56 7.88 7.19 1.06 3.42 3.50 2.93 0.13 0.67 3.29 4.08 23
QVFL16V300S 3 in.
QVFL16V075S 75 mm
QVFL19V303S 3 3 ⁄ 16 in.
QVFL19V304S 3 1 ⁄ 4 in.
QVFL19V080S 80 mm
124.5 193.8 170.7 241.3 212.9 187.33 32.5 20 97.3 99.3 86.4 3.6 17.0 93.7 114.0 15.9
QVFL19V085S 85 mm 22219 3⁄4
4.90 7.63 6.72 9.50 8.38 7.375 1.28 3.83 3.91 3.40 0.14 0.67 3.69 4.49 35
QVFL19V307S 3 7 ⁄ 16 in.
QVFL19V308S 3 1 ⁄ 2 in.
QVFL19V090S 90 mm
QVFL22V311S 3 11 ⁄ 16 in.
QVFL22V312S 3 3 ⁄ 4 in.
139.7 229.6 193.0 273.1 241.3 215.90 38.1 24 116.8 118.9 104.6 11.9 9.9 104.9 126.7 24.9
QVFL22V100S 100 mm 22222
5.50 9.04 7.60 10.75 9.50 8.500 1.50 1 4.60 4.68 4.12 0.47 0.39 4.13 4.99 55
QVFL22V315S 3 15 ⁄ 16 in.
QVFL22V400S 4 in.
(1)
(2)

(3)
Add (p) to the end of the housing designation in the part number to order with pilot using G dimension.
(4)
Piloted flange blocks will be quoted (price and delivery) upon request. For optional spigot on flange side, insert the letter P as seen in the following example: QMFP**J***S.
(5)

V-Lock SERIES • QVFX and QVVFX 5000 SERIES Square Flange Blocks – Straight Bore Equivalent
QVFX and QVVFX 5000 SERIES Square Flange Blocks –

Straight Bore Equivalent

QVFX11V115S 1 15 ⁄ 16 in.
75.9 120.7 103.6 146.1 134.9 111.13 22.4 12 84.1 86.1 65.0 4.1 18.3 79.8 102.1 5.0
QVFX11V200S 2 in. 22211 1⁄2
2.99 4.75 4.08 5.75 5.31 4.375 0.88 3.31 3.39 2.56 0.16 0.72 3.14 4.02 11
QVFX11V050S 50 mm
QVFX12V203S 2 3 ⁄ 16 in.
80.3 130.3 114.3 161.5 149.4 127.00 25.4 16 84.3 86.4 66.8 4.6 17.5 79.8 102.1 6.4
QVFX12V204S 2 1 ⁄ 4 in. 22212 5⁄8
3.16 5.13 4.50 6.36 5.88 5.000 1.00 3.32 3.40 2.63 0.18 0.69 3.14 4.02 14
QVFX12V055S 55 mm
QVFX14V060S 60 mm
QVFX14V207S 2 7 ⁄ 16 in. 94.0 146.1 127.8 180.8 157.2 138.13 25.4 16 85.1 87.4 72.4 4.1 16.0 81.0 101.3 7.7
22214 5⁄8
QVFX14V208S 2 1 ⁄ 2 in. 3.70 5.75 5.03 7.12 6.19 5.438 1.00 3.35 3.44 2.85 0.16 0.63 3.19 3.99 17
QVFX14V065S 65 mm
QVFX16V211S 2 11 ⁄ 16 in.
QVFX16V212S 2 3 ⁄ 4 in.
QVFX16V070S 70 mm 106.4 168.9 152.7 215.9 189.0 160.35 26.9 20 87.6 89.7 76.2 4.1 16.3 83.6 103.6 10.4
22216 3⁄4
QVFX16V215S 2 15 ⁄ 16 in. 4.19 6.65 6.01 8.50 7.44 6.313 1.06 3.45 3.53 3.00 0.16 0.64 3.29 4.08 23
QVFX16V300S 3 in.
QVFX16V075S 75 mm
QVFX19V303S 3 3 ⁄ 16 in.
QVFX19V304S 3 1 ⁄ 4 in.
QVFX19V080S 80 mm
124.5 193.8 170.7 241.3 212.6 187.33 33.3 20 98.3 100.6 84.1 4.8 15.7 93.7 114.0 15.9
QVFX19V085S 85 mm 22219 3⁄4
4.90 7.63 6.72 9.50 8.37 7.375 1.31 3.87 3.96 3.31 0.19 0.62 3.69 4.49 35
QVFX19V307S 3 7 ⁄ 16 in.
QVFX19V308S 3 1 ⁄ 2 in.
QVFX19V090S 90 mm
QVFX22V311S 3 11 ⁄ 16 in.
QVFX22V312S 3 3 ⁄ 4 in.
139.7 215.9 211.1 298.5 268.2 225.43 38.1 24 114.0 116.3 100.6 9.4 12.7 104.9 126.7 24.9
QVFX22V100S 100 mm 22222
5.50 8.50 8.31 11.75 10.56 8.875 1.50 1 4.49 4.58 3.96 0.37 0.50 4.13 4.99 55
QVFX22V315S 3 15 ⁄ 16 in.
QVFX22V400S 4 in.
QVFX26V110S(6) 110 mm
QVFX26V407S(6) 4 7 ⁄ 16 in. 174.8 256.5 163.6 327.2 384.3 263.53 38.1 24 140.5 142.7 106.9 7.4 37.8 147.8 178.3 49.0
22226
QVFX26V408S(6) 4 1 ⁄ 2 in. 6.88 10.10 6.44(6) 12.88(6) 15.13 10.375 1.50 1(6) 5.53 5.62 4.21 0.29 1.49 5.82 7.02 108
QVFX26V115S(6) 115 mm
QVFX28V125S(6) 125 mm
QVFX28V415S(6) 4 15 ⁄ 16 in. 189.7 284.2 177.8 355.6 419.1 284.18 38.1 24 166.1 168.1 138.4 18.3 12.2 147.8 178.3 52.2
22228
QVFX28V500S(6) 5 in. 7.47 11.19 7.00(6) 14.00(6) 16.50 11.188 1.50 1 1 ⁄ 8 (6) 6.54 6.62 5.45 0.72 0.48 5.82 7.02 115
QVFX28V130S(6) 130 mm
(1)
(2)

(3)
(4)
(5)
(6) Six-bolt round housing.

V-Lock SERIES • QVFK and QVVFK 9000 SERIES Square Flange Blocks – Tapered Bore Equivalent
QVFK and QVVFK 9000 SERIES Square Flange Blocks –

Tapered Bore Equivalent

QVFK11V115S 1 15 ⁄ 16 in.
75.9 130.3 114.3 161.5 149.4 127.00 25.4 16 87.1 88.4 66.8 7.4 15.0 79.8 102.1 5.0
QVFK11V200S 2 in. 22211 5⁄8
2.99 5.13 4.50 6.36 5.88 5.000 1.00 3.43 3.48 2.63 0.29 0.59 3.14 4.02 11
QVFK11V050S 50 mm
QVFK13V203S 2 3 ⁄ 16 in.
80.3 146.1 127.8 180.8 157.2 138.13 25.4 16 92.2 94.2 72.4 6.9 15.5 85.3 107.7 6.4
QVFK13V204S 2 1 ⁄ 4 in. 22213 5⁄8
3.16 5.75 5.03 7.12 6.19 5.438 1.00 3.63 3.71 2.85 0.27 0.61 3.36 4.24 14
QVFK13V055S 55 mm
QVFK15V060S 60 mm
QVFK15V207S 2 7 ⁄ 16 in. 94.0 168.9 152.7 215.9 189.0 160.35 26.9 20 92.5 94.5 76.2 9.9 11.4 82.6 103.9 7.7
22215 3⁄4
QVFK15V208S 2 1 ⁄ 2 in. 3.70 6.65 6.01 8.50 7.44 6.313 1.06 3.64 3.72 3.00 0.39 0.45 3.25 4.09 17
QVFK15V065S 65 mm
QVFK17V211S 2 11 ⁄ 16 in.
QVFK17V212S 2 3 ⁄ 4 in.
QVFK17V070S 70 mm 106.4 193.8 170.7 241.3 212.9 187.33 33.3 20 92.5 101.1 84.1 14.5 7.1 84.6 106.2 10.4
22217 3⁄4
QVFK17V215S 2 15 ⁄ 16 in. 4.19 7.63 6.72 9.50 8.38 7.375 1.31 3.64 3.98 3.31 0.57 0.28 3.33 4.18 23
QVFK17V300S 3 in.
QVFK17V075S 75 mm
QVFK20V303S 3 3 ⁄ 16 in.
QVFK20V304S 3 1 ⁄ 4 in.
QVFK20V080S 80 mm
124.5 215.9 211.1 298.5 268.2 225.43 38.1 24 113.3 115.3 103.1 18.0 4.1 95.3 117.3 15.9
QVFK20V085S 85 mm 22220 7⁄8
4.90 8.50 8.31 11.75 10.56 8.875 1.50 4.46 4.54 4.06 0.71 0.16 3.75 4.62 35
QVFK20V307S 3 7 ⁄ 16 in.
QVFK20V308S 3 1 ⁄ 2 in.
QVFK20V090S 90 mm
QVFK22V311S(6) 3 11 ⁄ 16 in.
QVFK22V312S(6) 3 3 ⁄ 4 in.
139.7 256.5 168.7 327.2 384.3 263.53 31.8 24 117.3 119.4 106.9 12.4 9.7 104.9 126.7 24.9
QVFK22V100S(6) 100 mm 22222
5.50 10.10 6.64(6) 12.88(6) 15.13 10.375 1.25 1(6) 4.62 4.70 4.21 0.49 0.38 4.13 4.99 55
QVFK22V315S(6) 3 15 ⁄ 16 in.
QVFK22V400S(6) 4 in.
QVFK26V110S(6) 110 mm
QVFK26V407S(6) 4 7 ⁄ 16 in. 174.8 284.2 177.8 355.6 419.1 124.18 38.1 28.6 164.6 166.6 135.1 11.7 13.7 147.8 178.3 49.0
22226
QVFK26V408S(6) 4 1 ⁄ 2 in. 6.88 11.19 7.00(6) 14.00(6) 16.50 4.89 1.50 1 1 ⁄ 8 (6) 6.48 6.56 5.32 0.46 0.54 5.82 7.02 108
QVFK26V115S(6) 115 mm
(1)
(2)

(3)
(4)
(5)
Six-bolt round housing.

(6)

V-Lock SERIES • QVFY and QVVFY Round Flange Blocks – Straight Bore Equivalent
QVFY and QVVFY Round Flange Blocks – Straight Bore Equivalent

QVFY11V115S 1 15 ⁄ 16 in.
75.9 115.3 103.4 146.1 177.8 111.13 19.1 12 78.5 80.5 58.4 1.5 23.9 79.8 102.1 5.4
QVFY11V200S 2 in. 22211 1⁄2
2.99 4.54 4.07 5.75 7.00 4.375 0.75 3.09 3.17 2.30 0.06 0.94 3.14 4.02 12
QVFY11V050S 50 mm
QVFY12V203S 2 3 ⁄ 16 in.
80.3 130.3 114.6 162.1 196.9 127.00 19.1 16 80.0 82.0 62.0 0.3 22.1 79.8 102.1 6.8
QVFY12V204S 2 1 ⁄ 4 in. 22212 5⁄8
3.16 5.13 4.51 6.38 7.75 5.000 0.75 3.15 3.23 2.44 0.01 0.87 3.14 4.02 15
QVFY12V055S 55 mm
QVFY14V060S 60 mm
QVFY14V207S 2 7 ⁄ 16 in. 94.0 146.1 121.2 171.5 206.5 138.13 23.9 16 84.8 86.9 72.4 3.8 16.5 81.0 101.3 8.6
22214 5⁄8
QVFY14V208S 2 1 ⁄ 2 in. 3.70 5.75 4.77 6.75 8.13 5.438 0.94 3.34 3.42 2.85 0.15 0.65 3.19 3.99 19
QVFY14V065S 65 mm
QVFY16V211S 2 11 ⁄ 16 in.
QVFY16V212S 2 3 ⁄ 4 in.
QVFY16V070S 70 mm 106.4 168.4 141.2 200.2 241.3 160.35 23.9 20 88.4 90.4 76.2 4.8 15.2 83.6 103.6 12.7
22216 3⁄4
QVFY16V215S 2 15 ⁄ 16 in. 4.19 6.63 5.56 7.88 9.50 6.313 0.94 3.48 3.56 3.00 0.19 0.60 3.29 4.08 28
QVFY16V300S 3 in.
QVFY16V075S 75 mm
QVFY19V303S 3 3 ⁄ 16 in.
QVFY19V304S 3 1 ⁄ 4 in.
QVFY19V080S 80 mm
124.5 193.8 170.7 241.3 282.7 187.33 28.7 24 98.3 116.1 85.3 4.8 15.7 93.7 114.0 19.1
QVFY19V085S 85 mm 22219 7⁄8
4.90 7.63 6.72 9.50 11.13 7.375 1.13 3.87 4.57 3.36 0.19 0.62 3.69 4.49 42
QVFY19V307S 3 7 ⁄ 16 in.
QVFY19V308S 3 1 ⁄ 2 in.
QVFY19V090S 90 mm
QVFY22V311S 3 11 ⁄ 16 in.
QVFY22V312S 3 3 ⁄ 4 in.
139.7 222.5 193.0 273.1 320.8 28.7 24 115.3 117.3 103.1 10.4 11.4 104.9 126.7 29.9
QVFY22V100S 100 mm 22222 N/A
5.50 8.76 7.60 10.75 12.63 1.13 1 4.54 4.62 4.06 0.41 0.45 4.13 4.99 66
QVFY22V315S 3 15 ⁄ 16 in.
QVFY22V400S 4 in.
QVFY26V110S(6) 110 mm
QVFY26V407S(6) 4 7 ⁄ 16 in. 174.8 230.1 163.6 327.2 384.3 38.1 24 140.5 142.7 106.9 7.4 37.8 147.8 178.3 49.0
22226 N/A
QVFY26V408S(6) 4 1 ⁄ 2 in. 6.88 9.06 6.44(6) 12.88(6) 15.13 1.50 1(6) 5.53 5.62 4.21 0.29 1.49 5.82 7.02 108
QVFY26V115S(6) 115 mm
QVFY28V125S(6) 125 mm
QVFY28V415S(6) 4 15 ⁄ 16 in. 190.0 284.2 177.8 355.6 419.1 38.1 24 166.1 168.1 138.4 18.3 12.2 147.8 178.3 52.2
22228 N/A
QVFY28V500S(6) 5 in. 7.48 11.19 7.00(6) 14.00(6) 16.50 1.50 1 1 ⁄ 8 (6) 6.54 6.62 5.45 0.72 0.48 5.82 7.02 115
QVFY28V130S(6) 130 mm
(1)
(2)

(3)
(4)
(5)

(6)

V-Lock SERIES • QVC and QVVC Piloted Flange Cartridges – Straight Bore Equivalent
QVC and QVVC Piloted Flange Cartridges – Straight Bore Equivalent
Bearing Shaft Bearing B B

C D B.C. E F G(3) H J L N Rv (1) Rvv Sv (1) Svv Wt.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm kg
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs.
QVC11V115S 1 15 ⁄ 16 in.
53.8 55.9 75.9 113.5 136.7 96.5 162.1 114.3 16.0 10 80.8 26.9 0.8 21.6 79.8 102.1 4.5
QVC11V200S 2 in. 22211 7 ⁄ 16
2.12 2.20 2.99 4.47 5.38 3.80 6.38 4.500 0.63 3.18 1.06 0.03 0.85 3.14 4.02 10
QVC11V050S 50 mm
QVC12V203S 2 3 ⁄ 16 in.
51.3 53.3 80.3 127.0 152.4 107.7 185.4 127.0 14.7 12 80.0 28.7 0.3 22.1 79.8 102.1 5.9
QVC12V204S 2 1 ⁄ 4 in. 22212 1⁄2
2.02 2.10 3.16 5.00 6.00 4.24 7.30 5.000 0.58 3.15 1.13 0.01 0.87 3.14 4.02 13
QVC12V055S 55 mm
QVC14V060S 60 mm
QVC14V207S 2 7 ⁄ 16 in. 56.1 58.2 94.0 139.7 165.1 116.8 193.8 139.7 17.5 12 84.6 28.7 3.8 16.5 81.0 101.3 7.3
22214 1⁄2
QVC14V208S 2 1 ⁄ 2 in. 2.21 2.29 3.70 5.50 6.50 4.60 7.63 5.500 0.69 3.33 1.13 0.15 0.65 3.19 3.99 16
QVC14V065S 65 mm
QVC16V211S 2 11 ⁄ 16 in.
QVC16V212S 2 3 ⁄ 4 in.
QVC16V070S 70 mm 52.8 54.9 106.4 162.1 190.5 134.6 222.3 161.9 20.6 16 84.6 31.8 1.0 19.3 83.6 103.6 10.0
22216 5⁄8
QVC16V215S 2 15 ⁄ 16 in. 2.08 2.16 4.19 6.38 7.50 5.30 8.75 6.375 0.81 3.33 1.25 0.04 0.76 3.29 4.08 22
QVC16V300S 3 in.
QVC16V075S 75 mm
QVC19V303S 3 3 ⁄ 16 in.
QVC19V304S 3 1 ⁄ 4 in.
QVC19V080S 80 mm
62.5 64.5 124.5 185.2 219.2 154.9 262.6 187.3 25.4 20 95.8 33.3 2.0 18.5 93.7 114.0 14.5
QVC19V085S 85 mm 22219 3⁄4
2.46 2.54 4.90 7.29 8.63 6.10 10.34 7.375 1.00 3.77 1.31 0.08 0.73 3.69 4.49 32
QVC19V307S 3 7 ⁄ 16 in.
QVC19V308S 3 1 ⁄ 2 in.
QVC19V090S 90 mm
QVC22V311S 3 11 ⁄ 16 in.
QVC22V312S 3 3 ⁄ 4 in.
60.2 62.2 139.7 222.5 238.3 168.4 276.4 206.4 25.4 20 115.3 54.1 10.4 11.7 104.9 126.7 19.5
QVC22V100S 100 mm 22222 3⁄4
2.37 2.45 5.50 8.76 9.38 6.63 10.88 8.125 1.00 4.54 2.13 0.41 0.46 4.13 4.99 43
QVC22V315S 3 15 ⁄ 16 in.
QVC22V400S 4 in.
QVC26V110S(4) 110 mm
QVC26V407S(4) 4 7 ⁄ 16 in. 86.4 88.4 174.8 260.4 298.5 149.4 342.9 260.4 25.4 20 134.6 48.3 13.2 43.7 147.8 178.3 32.7
22226 3 ⁄ 4 (4)
QVC26V408S(4) 4 1 ⁄ 2 in. 3.40 3.48 6.88 10.25 11.75(4) 5.88(4) 13.50 10.250 1.00 5.30 1.90 0.52 1.72 5.82 7.02 72
QVC26V115S(4) 115 mm
(1)
(2)

(3)

(4)

V-Lock SERIES • QVCW and QVVCW Piloted Flange Cartridges – Straight Bore Equivalent
QVCW and QVVCW Piloted Flange Cartridges –

Straight Bore Equivalent
Bearing Shaft Bearing B B

C D B.C. E F G(3) H J L N Rv (1) Rvv Sv (1) Svv Wt.
QVCW11V115S 1 15 ⁄ 16 in.
42.2 44.2 75.9 113.5 136.7 96.5 162.1 114.3 9.7 10 80.3 38.1 0.8 21.8 79.8 102.1 4.5
QVCW11V200S 2 in. 22211 7 ⁄ 16
1.66 1.74 2.99 4.47 5.38 3.80 6.38 4.500 0.38 3.16 1.50 0.03 0.86 3.14 4.02 10
QVCW11V050S 50 mm
QVCW12V203S 2 3 ⁄ 16 in.
43.2 45.5 80.3 127.0 152.4 107.7 181.1 127.0 14.2 12 84.6 41.4 4.8 17.5 79.8 102.1 5.9
QVCW12V204S 2 1 ⁄ 4 in. 22212 1⁄2
1.70 1.79 3.16 5.00 6.00 4.24 7.13 5.000 0.56 3.33 1.63 0.19 0.69 3.14 4.02 13
QVCW12V055S 55 mm
QVCW14V060S 60 mm
QVCW14V207S 2 7 ⁄ 16 in. 41.9 43.9 94.0 139.7 165.1 116.8 193.8 139.7 12.7 12 86.4 42.9 5.3 15.0 81.0 101.3 7.3
22214 1⁄2
QVCW14V208S 2 1 ⁄ 2 in. 1.65 1.73 3.70 5.50 6.50 4.60 7.63 5.500 0.50 3.40 1.69 0.21 0.59 3.19 3.99 16
QVCW14V065S 65 mm
QVCW16V211S 2 11 ⁄ 16 in.
QVCW16V212S 2 3 ⁄ 4 in.
QVCW16V070S 70 mm 37.6 39.6 106.4 162.1 190.5 134.6 222.3 161.9 12.7 16 85.1 47.8 1.8 18.5 83.6 103.6 10.0
22216 5⁄8
QVCW16V215S 2 15 ⁄ 16 in. 1.48 1.56 4.19 6.38 7.50 5.30 8.75 6.375 0.50 3.35 1.88 0.07 0.73 3.29 4.08 22
QVCW16V300S 3 in.
QVCW16V075S 75 mm
QVCW19V303S 3 3 ⁄ 16 in.
QVCW19V304S 3 1 ⁄ 4 in.
QVCW19V080S 80 mm
49.8 51.8 124.5 187.5 219.2 154.9 260.4 187.3 22.4 20 97.5 47.8 3.8 16.8 93.7 114.0 14.5
QVCW19V085S 85 mm 22219 3⁄4
1.96 2.04 4.90 7.38 8.63 6.10 10.25 7.375 0.88 3.84 1.88 0.15 0.66 3.69 4.49 32
QVCW19V307S 3 7 ⁄ 16 in.
QVCW19V308S 3 1 ⁄ 2 in.
QVCW19V090S 90 mm
QVCW22V311S 3 11 ⁄ 16 in.
QVCW22V312S 3 3 ⁄ 4 in.
51.6 53.6 139.7 222.5 238.3 168.4 276.4 206.4 25.4 20 109.7 57.2 4.8 17.3 104.9 126.7 19.5
QVCW22V100S 100 mm 22222 3⁄4
2.03 2.11 5.50 8.76 9.38 6.63 10.88 8.125 1.00 4.32 2.25 0.19 0.68 4.13 4.99 43
QVCW22V315S 3 15 ⁄ 16 in.
QVCW22V400S 4 in.
QVCW26V110S(4) 110 mm
QVCW26V407S(4) 4 7 ⁄ 16 in. 72.4 74.4 174.8 260.4 298.5 149.4 342.9 260.4 25.4 20 140.5 68.3 7.4 37.8 147.8 178.3 32.7
22226 3⁄4
QVCW26V408S(4) 4 1 ⁄ 2 in. 2.85 2.93 6.88 10.25 11.75(4) 5.88(4) 13.50 10.250 1.00(4) 5.53 2.69 0.29 1.49 5.82 7.02 72
QVCW26V115S(4) 115 mm
QVCW28V125S(4) 125 mm
QVCW28V415S(4) 4 15 ⁄ 16 in. 66.5 68.6 190.0 266.7 323.9 162.1 374.7 279.4 26.2 24 144.5 78.0 3.3 33.8 147.8 178.3 46.3
22228 7⁄8
QVCW28V500S(4) 5 in. 2.62 2.70 7.48 10.50 12.75(4) 6.38(4) 14.75 11.000 1.03(4) 5.69 3.07 0.13 1.33 5.82 7.02 102
QVCW28V130S(4) 130 mm
(1)
(2)

(3)

(4)

V-Lock SERIES • QVMC and QVVMC Cartridge Blocks – Tapered Bore Equivalent
QVMC and QVVMC Cartridge Blocks – Tapered Bore Equivalent

A B C D F G Rv (1) Rvv Sv (1) Svv Wt.
QVMC11V115S 1 15 ⁄ 16 in. 115.09
13.5 23.0 75.9 4.8 (+0/-0.05) 55.4 79.0 81.0 0.8 23.1 79.8 102.1 4.5
QVMC11V200S 2 in. 22211
0.530 0.906 2.99 0.188 4.531 2.180 3.11 3.19 0.03 0.91 3.14 4.02 10
QVMC11V050S 50 mm (+0/-0.002)
QVMC13V203S 2 3 ⁄ 16 in. 127.00
1⁄4
13.5 23.0 80.3 4.8 (+0/-0.05) 67.1 85.9 87.9 0.5 21.8 85.3 107.7 5.4
QVMC13V204S 2 in. 22213
0.530 0.906 3.16 0.188 5.000 2.640 3.38 3.46 0.02 0.86 3.36 4.24 12
QVMC13V055S 55 mm (+0/-0.002)
QVMC15V060S 60 mm 149.23
QVMC15V207S 2 7 ⁄ 16 in. 15.1 26.2 94.0 6.4 (+0/-0.05) 70.6 87.4 89.4 5.1 16.5 82.6 103.9 8.2
22215
QVMC15V208S 2 1 ⁄ 2 in. 0.594 1.032 3.70 0.250 5.875 2.780 3.44 3.52 0.20 0.65 3.25 4.09 18
QVMC15V065S 65 mm (+0/-0.002)
QVMC17V211S 2 11 ⁄ 16 in.
QVMC17V212S 2 3 ⁄ 4 in. 171.45
QVMC17V070S 70 mm 15.1 27.5 106.4 7.1 (+0/-0.05) 74.9 91.2 93.2 6.4 15.0 84.6 106.2 11.8
22217
QVMC17V215S 2 15 ⁄ 16 in. 0.594 1.083 4.19 0.281 6.75 2.950 3.59 3.67 0.25 0.59 3.33 4.18 26
QVMC17V300S 3 in. (+0/-0.002)
QVMC17V075S 75 mm
QVMC20V303S 3 3 ⁄ 16 in.
QVMC20V304S 3 1 ⁄ 4 in.
QVMC20V080S 80 mm 206.38
19.8 32.5 124.5 8.0 (+0/-0.05) 85.6 102.1 104.1 6.9 15.2 95.3 117.3 14.5
QVMC20V085S 85 mm 22220
0.781 1.281 4.90 0.313 8.125 3.370 4.02 4.10 0.27 0.60 3.75 4.62 32
QVMC20V307S 3 7 ⁄ 16 in. (+0/-0.002)
QVMC20V308S 3 1 ⁄ 2 in.
QVMC20V090S 90 mm
QVMC22V311S 3 11 ⁄ 16 in.
QVMC22V312S 3 3 ⁄ 4 in. 222.25
19.8 32.5 139.7 8.0 (+0/-0.08) 97.8 113.0 115.1 8.1 14.0 104.9 126.7 18.1
QVMC22V100S 100 mm 22222
0.781 1.281 5.50 0.313 8.75 3.850 4.45 4.53 0.32 0.55 4.13 4.99 40
QVMC22V315S 3 15 ⁄ 16 in. (+0/-0.003)
QVMC22V400S 4 in.
QVMC26V110S 110 mm 265.10
QVMC26V407S 4 7 ⁄ 16 in. 19.8 38.1 174.8 8.0 (+0/-0.08) 104.4 141.5 143.5 6.4 36.8 147.8 178.3 23.6
22226
QVMC26V408S 4 1 ⁄ 2 in. 0.780 1.500 6.88 0.313 10.437 4.110 5.57 5.65 0.25 1.45 5.82 7.02 52
QVMC26V115S 115 mm (+0/-0.003)
(1)
(2)

V-Lock SERIES • QVVTU Take-Up Blocks – Straight Bore Equivalent
QVVTU Take-Up Blocks – Straight Bore Equivalent
QV Single-Nut Unit QVV Double-Nut Unit

A C D E F G J L N P S Rv (1) Rvv Tv (1) Tvv Wt.
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in.
QVVTU14V060S 60 mm
QVVTU14V207S 2 7 ⁄ 16 in. 69.9 22.4 149.4 130.3 33.3 33.3 95.3 193.8 88.4 120.7 26.9 3.3 15.5 85.1 103.9 7.7
22214
QVVTU14V208S 2 1 ⁄ 2 in. 2.75 0.88 5.88 5.13 1.31 1.31 3.75 7.63 3.48 4.75 1.06 0.13 0.61 3.35 4.09 17
QVVTU14V065S 65 mm
QVVTU16V211S 2 11 ⁄ 16 in.
QVVTU16V212S 2 3 ⁄ 4 in.
QVVTU16V070S 70 mm 76.2 25.4 171.5 150.9 39.6 39.6 108.0 219.7 90.2 120.7 46.0 2.3 16.3 87.6 106.2 15.9
22216
QVVTU16V215S 2 15 ⁄ 16 in. 3.00 1.00 6.75 5.94 1.56 1.56 4.25 8.65 3.55 4.75 1.81 0.09 0.64 3.45 4.18 35
QVVTU16V300S 3 in.
QVVTU16V075S 75 mm
QVVTU19V303S 3 3 ⁄ 16 in.
QVVTU19V304S 3 1 ⁄ 4 in.
QVVTU19V080S 80 mm
92.2 25.4 193.8 173.0 46.0 47.8 124.0 257.0 99.6 158.8 46.0 0.5 18.0 99.1 117.6 20.0
QVVTU19V085S 85 mm 22219
3.63 1.00 7.63 6.81 1.81 1.88 4.88 10.12 3.92 6.25 1.81 0.02 0.71 3.90 4.63 44
QVVTU19V307S 3 7 ⁄ 16 in.
QVVTU19V308S 3 1 ⁄ 2 in.
QVVTU19V090S 90 mm
QVVTU22V311S 3 11 ⁄ 16 in.
QVVTU22V312S 3 3 ⁄ 4 in.
104.9 28.7 239.8 219.2 54.1 52.3 143.0 296.9 111.3 177.8 52.3 1.5 18.8 110.0 130.3 26.3
QVVTU22V100S 100 mm 22222
4.13 1.13 9.44 8.63 2.13 2.06 5.63 11.69 4.38 7.00 2.06 0.06 0.74 4.33 5.13 58
QVVTU22V315S 3 15 ⁄ 16 in.
QVVTU22V400S 4 in.
(1)

CL Series
CL Series
Available in both single-collar (QA) and double-collar (QAA) You Have Choices
versions, the CL bearing series features a concentric locking
collar with two set screws at 60 degrees to provide maximum For the CL series, you can select either single-collar or double-
positive locking power with minimal run out. collar versions and choose from many seal configurations and
housing styles, which are shown on page C-100.
Housings
• Four-bolt pillow blocks.
• Flange blocks.
• Piloted flange cartridges.
• Take-up blocks.
• Cartridge blocks.
• Hanger blocks.
Seals
Fig. C-43. CL series single-collar (QA) insert available • Labyrinth: DuPont Teflon (T).
up to 100 mm (4 in.).
DuPont Viton (N).

• Steel and urethane open-end covers (CJ) with:
• V-ring seal (VR).
• Piloted flange cartridge backing plates (HSY) with:

• Flange block backing plates (UFP).

• V-ring (VR).
Fig. C-44. CL series double-collar (QAA) insert for size

ranges 50 mm – 130 mm (1 15 ⁄ 16 in. – 5 in.).

CL Series
CL Series
Cover Backing Plate
Closed-End UFP
Pillow Block • • • • • • • • • •
Flange Block • • • • • • • • • •
V-Lock
Lock)
Take-Up Block • • • • • • • • • •
Pillow Block • • • • • • • • • •
Flange Block • • • • • • • • • • •
Piloted Flange
(Set Screw Lock)
Take-Up Block • • • • • • • • • •
Hangar Block • • • • • • • • • •
Pillow Block • • • • • • • • • •
Flange Block • • • • • • • • • • •
Piloted Flange
(Eccentric Lock)
Take-Up Block • • • • • • • • • •
Hangar Block • • • • • • • • • •
Pillow Block • • • • • • • • • •

(Tapered Adapter
Cartridge • • • • • • • • • •
Pillow Block • • • • • • • • • •
DV Series
Lock)
Piloted Flange
Cartridge • • • • • • • • • •

CL Series • QAP and QAAP Two-Bolt Pillow Blocks
QAP and QAAP Two-Bolt Pillow Blocks
QA Single-Collar Unit QAA Double-Collar Unit

A B C D min. D max. F G H J KA L M RA R AA SA S AA Wt.
QAP08A035S 35 mm 47.8 94.7 60.5 119.1 152.4 174.8 57.2 25.4 12 25.4 73.2 44.5 3.3 69.9 4.1
22208 1⁄2
– –
QAP08A107S 1 7 ⁄ 16 in. 1.88 3.73 2.38 4.69 6.00 6.88 2.25 1.00 1.00 2.88 1.75 0.13 2.75 9
54.1 101.1 60.5 119.1 165.1 200.2 57.2 25.4 12 25.4 73.2 44.5 3.3 69.9 4.1
QAP08A108S 1 1 ⁄ 2 in. 22208 1⁄2
– –
2.13 3.98 2.38 4.69 6.50 7.88 2.25 1.00 1.00 2.88 1.75 0.13 2.75 9
54.1 104.9 66.8 144.8 165.1 200.2 60.2 31.8 12 25.4 78.0 47.8 4.8 73.2 4.5
QAP09A111S 1 11 ⁄ 16 in. 22209 1⁄2
– –
2.13 4.13 2.63 5.70 6.50 7.88 2.37 1.25 1.00 3.07 1.88 0.19 2.88 10
QAP09A040S 40 mm
57.2 108.0 66.8 158.8 180.8 225.6 62.0 31.8 16 25.4 78.7 47.8 5.6 73.2 4.5
QAP09A112S 1 3 ⁄ 4 in. 22209 5⁄8
– –
2.25 4.25 2.63 6.25 7.12 8.88 2.44 1.25 1.00 3.10 1.88 0.22 2.88 10
QAP09A045S 45mm
QAP10A115S
1 15 ⁄ 16 in.
QAAP10A115S
QAP10A200S 57.2 122.2 73.2 152.4 181.1 225.6 62.0 31.8 16 25.4 79.0 47.5 6.1 17.0 72.9 95.3 5.9
2 in. 22210 5⁄8
QAAP10A200S 2.25 4.81 2.88 6.00 7.13 8.88 2.44 1.25 1.00 3.11 1.87 0.24 0.67 2.87 3.75 13
QAP10A050S
50 mm
QAAP10A050S
QAP11A203S
2 3 ⁄ 16 in.
QAAP11A203S
QAP11A204S 63.5 133.4 82.6 165.1 200.2 244.6 66.8 31.8 16 28.7 84.3 50.8 4.8 17.5 79.5 101.6 7.7
2 1 ⁄ 4 in. 22211 5⁄8
QAAP11A204S 2.50 5.25 3.25 6.50 7.88 9.63 2.63 1.25 1.13 3.32 2.00 0.19 0.69 3.13 4.00 17
QAP11A055S
55 mm
QAAP11A055S
QAP13A060S
60 mm
QAAP13A060S
QAP13A207S
2 7 ⁄ 16 in.
QAAP13A207S 69.9 147.3 96.8 174.8 219.2 260.4 73.7 35.1 16 31.5 91.4 54.6 5.3 17.8 86.1 109.2 10.0
22213 5⁄8
QAP13A208S 2.75 5.80 3.81 6.88 8.63 10.25 2.90 1.38 1.24 3.60 2.15 0.21 0.70 3.39 4.30 22
2 1 ⁄ 2 in.
QAAP13A208S
QAP13A065S
65 mm
QAAP13A065S
Bearing part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate
(1)
double-collar units (use S AA and R AA dimensions).

CL Series • QAP and QAAP Two-Bolt Pillow Blocks

QAP15A211S
2 11 ⁄ 16 in.
QAAP15A211S
QAP15A212S
2 3 ⁄ 4 in.
QAAP15A212S
QAP15A070S
70 mm
QAAP15A070S 79.5 164.3 109.0 200.2 244.6 295.4 76.2 35.1 20 31.8 98.3 60.2 6.4 22.1 91.9 120.4 12.7
22215 3⁄4
QAP15A215S 3.13 6.47 4.29 7.88 9.63 11.63 3.00 1.38 1.25 3.87 2.37 0.25 0.87 3.62 4.74 28
2 15 ⁄ 16 in.
QAAP15A215S
QAP15A300S
3 in.
QAAP15A300S
QAP15A075S
75 mm
QAAP15A075S
QAP18A303S
3 3 ⁄ 16 in.
QAAP18A303S
QAP18A304S
3 1 ⁄ 4 in.
QAAP18A304S
QAP18A080S
80 mm
QAAP18A080S
QAP18A085S 95.3 195.3 130.3 238.3 285.8 342.9 86.6 47.8 24 36.6 109.2 65.8 6.9 22.6 102.4 131.6 20.4
85 mm 22218 7⁄8
QAAP18 A085S 3.75 7.69 5.13 9.38 11.25 13.50 3.41 1.88 1.44 4.30 2.59 0.27 0.89 4.03 5.18 45
QAP18A307S
3 7 ⁄ 16 in.
QAAP18A307S
QAP18A308S
3 1 ⁄ 2 in.
QAAP18A308S
QAP18A090S
90 mm
QAAP18A090S
QAP20A315S
3 15 ⁄ 16 in.
QAAP20A315S
QAP20A400S 104.9 209.8 152.4 255.0 320.0 362.0 94.7 50.8 24 41.4 122.9 75.4 6.1 28.2 116.8 150.9 26.8
4 in. 22220
QAAP20A400S 4.13 8.26 6.00 10.04 12.60 14.25 3.73 2.00 1 1.63 4.84 2.97 0.24 1.11 4.60 5.94 59
QAP20A100S
100 mm
QAAP20A100S
Bearing part numbers use QA to designate single-collar units (use S A and R A dimensions) and QAA to designate double-collar units (use S AA and R AA dimensions).
(1)

CL Series • QAPL and QAAPL Two-Bolt Pillow Blocks
QAPL and QAAPL Two-Bolt Pillow Blocks

QAPL08A035S 35 mm
47.8 94.7 60.5 119.1 152.4 174.8 57.2 25.4 12 25.4 73.2 44.5 3.3 69.9 4.1
QAPL08A107S 1 7 ⁄ 16 in. 22208 1⁄2
– –
1.88 3.73 2.38 4.69 6.00 6.88 2.25 1.00 1.00 2.88 1.75 0.13 2.75 9
QAPL08A108S 1 1 ⁄ 2 in.
QAPL09A040S 40 mm
QAPL09A111S 1 11 ⁄ 16 in.
54.1 104.9 66.8 133.4 146.1 181.1 60.2 31.8 12 25.4 78.0 47.8 4.8 73.2 4.5
22209 1⁄2
– –
2.13 4.13 2.63 5.25 5.75 7.13 2.37 1.25 1.00 3.07 1.88 0.19 2.88 10
QAPL09A112S 1 3 ⁄ 4 in.
QAPL09A045S 45 mm
QAPL10A115S
1 15 ⁄ 16 in.
QAAPL10A115S
QAPL10A200S 57.2 122.2 73.2 150.6 161.5 212.9 62.0 31.8 16 25.4 79.0 47.5 6.1 17.0 72.9 95.3 5.9
2 in. 22210 5⁄8
QAAPL10A200S 2.25 4.81 2.88 5.93 6.36 8.38 2.44 1.25 1.00 3.11 1.87 0.24 0.67 2.87 3.75 13
QAPL10A050S
50 mm
QAAPL10A050S
QAPL11A203S
2 3 ⁄ 16 in.
QAAPL11A203S
QAPL11A204S 63.5 133.4 82.6 165.1 179.3 225.6 65.5 31.8 16 28.7 83.6 50.8 4.1 18.0 79.5 101.6 7.7
2 1 ⁄ 4 in. 22211 5⁄8
QAAPL11A204S 2.50 5.25 3.25 6.50 7.06 8.88 2.58 1.25 1.13 3.29 2.00 0.16 0.71 3.13 4.00 17
QAPL11A055S
55 mm
QAAPL11A055S
QAPL13A060S
60 mm
QAAPL13A060S
QAPL13A207S
2 7 ⁄ 16 in.
QAAPL13A207S 69.9 147.3 96.8 173.0 189.0 235.0 73.7 35.1 16 31.5 91.4 54.6 5.3 17.8 86.1 109.2 10.0
22213 5⁄8
QAPL13A208S 2.75 5.80 3.81 6.81 7.44 9.25 2.90 1.38 1.24 3.60 2.15 0.21 0.70 3.39 4.30 22
2 1 ⁄ 2 in.
QAAPL13A208S
QAPL13A065S
65 mm
QAAPL13A065S
(1)

CL Series • QAPL and QAAPL Two-Bolt Pillow Blocks

QAPL15A211S
2 11 ⁄ 16 in.
QAAPL15A211S
QAPL15A212S
2 3 ⁄ 4 in.
QAAPL15A212S
QAPL15A070S
70 mm
QAAPL15A070S 82.6 167.4 109.0 195.6 213.4 265.2 76.2 35.1 20 31.8 98.3 60.2 6.4 22.1 91.9 120.4 12.7
22215 3⁄4
QAPL15A215S 3.25 6.59 4.29 7.70 8.40 10.44 3.00 1.38 1.25 3.87 2.37 0.25 0.87 3.62 4.74 28
2 15 ⁄ 16 in.
QAAPL15A215S
QAPL15A300S
3 in.
QAAPL15A300S
QAPL15A075S
75 mm
QAAPL15A075S
QAPL18A303S
3 3 ⁄ 16 in.
QAAPL18A303S
QAPL18A304S
3 1 ⁄ 4 in.
QAAPL18A304S
QAPL18A080S
80 mm
QAAPL18A080S
QAPL18A085S 95.3 195.3 130.3 235.0 273.1 330.2 86.6 47.8 24 36.6 109.2 65.8 6.9 22.6 102.4 131.6 20.4
85 mm 22218 7⁄8
QAAPL18A085S 3.75 7.69 5.13 9.25 10.75 13.00 3.41 1.88 1.44 4.30 2.59 0.27 0.89 4.03 5.18 45
QAPL18A307S
3 7 ⁄ 16 in.
QAAPL18A307S
QAPL18A308S
3 1 ⁄ 2 in.
QAAPL18A308S
QAPL18A090S
90 mm
QAAPL18A090S
QAPL20A315S
3 15 ⁄ 16 in.
QAAPL20A315S
QAPL20A400S 108.0 212.9 152.4 255.0 320.0 362.0 94.7 54.1 24 41.4 122.9 75.4 6.1 28.2 116.8 150.9 26.8
4 in. 22220
QAAPL20A400S 4.25 8.38 6.00 10.04 12.60 14.25 3.73 2.13 1 1.63 4.84 2.97 0.24 1.11 4.60 5.94 59
QAPL20A100S
100 mm
QAAPL20A100S
(1)

CL Series • QASN and QAASN SN-Style Two-Bolt Pillow Blocks – Pure Metric Design
QASN and QAASN SN-Style Two-Bolt Pillow Blocks –

Pure Metric Design

QASN08A035S 35 mm
60 111 60.5 159 175 205 62 35 12 25 75 44 5 70 10.5
QASN08A107S 1 7 ⁄ 16 in. 22208 1⁄2
– –
2.36 4.37 2.38 6.26 6.89 8.07 2.44 1.38 1.00 2.95 1.75 0.20 2.75 23
QASN08A108S 1 1 ⁄ 2 in.
QASN09A040S 40 mm
QASN09A111S 1 11 ⁄ 16 in. 60 111 66.8 159 175 205 62 35 12 25 79 48 6 73 10.5
22209 1⁄2
– –
QASN09A112S 1 3 ⁄ 4 in. 2.36 4.37 2.63 6.26 6.89 8.07 2.44 1.38 1.00 3.10 1.88 0.22 2.88 23
QASN09A045S 45mm
QASN10A115S
1 15 ⁄ 16 in.
QAASN10A115S
QASN10A200S 70 136 73 183 216 254 68 25 16 25.4 82 48 9 14 73 95 12.7
2 in. 22210 5⁄8
QAASN10A200S 2.76 5.35 2.87 7.20 8.50 10.00 2.68 0.98 1 3.23 1.87 0.35 0.55 2.87 3.75 28
QASN10A050S
50 mm
QAASN10A050S
QASN11A203S
2 3 ⁄ 16 in.
QAASN11A203S
QASN11A204S 70 141 83 183 216 254 68 25 16 29 85 51 5 17 80 102 13.2
2 1 ⁄ 4 in. 22211 5⁄8
QAASN11A204S 2.76 5.55 3.27 7.20 8.50 10.00 2.68 0.98 1.14 3.35 2.01 0.20 0.67 3.15 4.02 29
QASN11A055S
55 mm
QAASN11A055S
QASN13A060S
60 mm
QAASN13A060S
QASN13A207S
2 7 ⁄ 16 in.
QAASN13A207S 80 157 96.8 196 235 275 74 35 16 31 92 55 6 18 86 110 15.9
22213 5⁄8
QASN13A208S 1⁄2
3.15 6.18 3.81 7.72 9.25 10.83 2.91 1.38 1.22 3.62 2.17 0.24 0.71 3.39 4.33 35
2 in.
QAASN13A208S
QASN13A065S
65 mm
QAASN13A065S
QASN15A211S
2 11 ⁄ 16 in.
QAASN15A211S
QASN15A212S
2 3 ⁄ 4 in.
QAASN15A212S
QASN15A070S
70 mm
QAASN15A070S 95 183 109.0 241 279 316 76 34 20 32 98 60 6 22 92 120 20.9
22215 3⁄4
QASN15A215S 15 ⁄ 16
3.74 7.20 4.29 9.49 10.98 12.44 2.99 1.34 1.26 3.86 2.36 0.24 0.87 3.62 4.72 46
2 in.
QAASN15A215S
QASN15A300S
3 in.
QAASN15A300S
QASN15A075S
75 mm
QAASN15A075S
(1)

CL Series • QASN and QAASN SN-Style Two-Bolt Pillow Blocks – Pure Metric Design


QASN18A303S
3 3 ⁄ 16 in.
QAASN18A303S
QASN18A304S 100 200 130 279 292 345 86 39 20 37 109 66 6 23 102 132 25.5
3 1 ⁄ 4 in. 22218 3⁄4
QAASN18A304S 3.94 7.87 5.12 10.98 11.50 13.58 3.39 1.54 1.46 4.29 2.60 0.24 0.91 4.02 5.20 56
QASN18A080S
80 mm
QAASN18A080S
QASN18A085S 112 212 130 279 292 345 86 39 20 37 109 66 6 23 102 132 25.5
85 mm 22218 3⁄4
QAASN18A085S 4.41 8.35 5.12 10.98 11.50 13.58 3.39 1.54 1.46 4.29 2.60 0.24 0.91 4.02 5.20 56
QASN18A307S
3 7 ⁄ 16 in.
QAASN18A307S
QASN18A308S 112 212 130 290 327 380 86 39 24 37 109 66 6 23 102 132 25.5
3 1 ⁄ 2 in. 22218 7⁄8
QAASN18A308S 4.41 8.35 5.12 11.42 12.87 14.96 3.39 1.54 1.46 4.29 2.60 0.24 0.91 4.02 5.20 56
QASN18A090S
90 mm
QAASN18A090S
QASN20A315S
3 15 ⁄ 16 in.
QAASN20A315S
QASN20A400S 125 241 152 319 366 410 101 50 24 41 126 75 10 25 117 150 35.9
4 in. 22220 7⁄8
QAASN20A400S 4.92 9.49 5.98 12.56 14.41 16.14 3.98 1.97 1.61 4.96 2.95 0.39 0.98 4.61 5.91 79
QASN20A100S
100 mm
QAASN20A100S
140 255 160 332 365 410 105 39 24 133 80 28 160 35.9
QAASN22A110S 110 mm 22222 7⁄8
– – –
5.51 10.04 6.30 13.07 14.37 16.14 4.13 1.54 5.24 3.15 1.10 6.30 79
QAASN22A407S 4 7 ⁄ 16 in.
150 265 160 367 400 445 105 49 24 133 80 28 160 40.0
QAASN22A408S 4 1 ⁄ 2 in. 22222 7⁄8
– – –
5.91 10.43 6.30 14.45 15.75 17.52 4.13 1.93 5.24 3.15 1.10 6.30 88
QAASN22A115S 115 mm
QAASN26A125S 125 mm
QAASN26A415S 4 15 ⁄ 16 in. 150 282 175 402 435 500 113 49 30 151 94 38 188 40.0
22226 – – –
QAASN26A500S 5 in. 5.91 11.1 6.89 15.83 17.13 19.69 4.45 1.93 1 1⁄4 5.94 3.7 1.5 7.4 88
QAASN26A130S 130 mm
(1)

CL Series • QAAPXT 5000 Series Two-Bolt Pillow Blocks
QAAPXT 5000 Series Two-Bolt Pillow Blocks

A B C D min. D max. F G H J L M R S Wt.
Part No. Dia. No.
QAAPXT13A060S 60 mm
QAAPXT13A207S 2 7 ⁄ 16 in. 76.2 153.7 96.8 194.6 223.0 285.8 73.7 35.1 20 91.4 54.6 17.8 109.2 10.0
22213 3⁄4
QAAPXT13A208S 2 1 ⁄ 2 in. 3.00 6.05 3.81 7.66 8.78 11.25 2.90 1.38 3.60 2.15 0.70 4.30 22
QAAPXT13A065S 65 mm
QAAPXT15A211S 2 11 ⁄ 16 in.
QAAPXT15A212S 2 3 ⁄ 4 in.
QAAPXT15A070S 70 mm 88.9 173.7 109.0 230.1 265.2 330.2 75.7 35.1 24 98.0 60.2 22.4 120.4 12.7
22215 7⁄8
QAAPXT15A215S 2 15 ⁄ 16 in. 3.50 6.84 4.29 9.06 10.44 13.00 2.98 1.38 3.86 2.37 0.88 4.74 28
QAAPXT15A300S 3 in.
QAAPXT15A075S 75 mm

CL Series • QAPF and QAAPF Four-Bolt Pillow Blocks
QAPF and QAAPF Four-Bolt Pillow Blocks

A B C D min. D max. E F G H J KA L M RA R AA SA S AA Wt.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm kg
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs.
QAPF13A060S
60 mm
QAAPF13A060S
QAPF13A207S
2 7 ⁄ 16 in.
QAAPF13A207S 69.9 147.3 96.8 174.8 193.8 44.5 235.0 76.2 24.9 16 31.5 92.7 54.6 5.3 17.8 86.1 109.2 9.1
22213 5⁄8
QAPF13A208S 2.75 5.80 3.81 6.88 7.63 1.75 9.25 3.00 0.98 1.24 3.65 2.15 0.21 0.70 3.39 4.30 20
2 1⁄2 in.
QAAPF13A208S
QAPF13A065S
65 mm
QAAPF13A065S
QAPF15A211S
2 11 ⁄ 16 in.
QAAPF15A211S
QAPF15A212S
2 3 ⁄ 4 in.
QAAPF15A212S
QAPF15A070S
70 mm
QAAPF15A070S 82.6 167.6 109.0 193.0 231.1 47.8 265.2 79.5 32.8 16 31.8 100.1 60.2 6.1 22.4 91.9 120.4 12.2
22215 5⁄8
QAPF15A215S 3.25 6.60 4.29 7.60 9.10 1.88 10.44 3.13 1.29 1.25 3.94 2.37 0.24 0.88 3.62 4.74 27
2 15 ⁄ 16 in.
QAAPF15A215S
QAPF15A300S
3 in.
QAAPF15A300S
QAPF15A075S
75 mm
QAAPF15A075S
(1)

CL Series • QAPF and QAAPF Four-Bolt Pillow Blocks

A B C D min. D max. E F G H J KA L M RA R AA SA S AA Wt.
QAPF18A303S
3 3 ⁄ 16 in.
QAAPF18A303S
QAPF18A304S
3 1 ⁄ 4 in.
QAAPF18A304S
QAPF18A080S
80 mm
QAAPF18A080S
QAPF18A085S 95.3 195.3 130.3 225.6 276.4 50.8 312.4 95.3 39.6 20 36.6 113.5 65.8 7.9 21.3 102.4 131.6 22.2
85 mm 22218 3⁄4
QAAPF18A085S 3.75 7.69 5.13 8.88 10.88 2.00 12.30 3.75 1.56 1.44 4.47 2.59 0.31 0.84 4.03 5.18 49
QAPF18A307S
3 7 ⁄ 16 in.
QAAPF18A307S
QAPF18A308S
3 1 ⁄ 2 in.
QAAPF18A308S
QAPF18A090S
90 mm
QAAPF18A090S
QAPF20A315S
3 15 ⁄ 16 in.
QAAPF20A315S
QAPF20A400S 108.0 223.0 152.4 276.4 339.9 57.2 378.0 109.5 35.6 20 41.4 130.3 75.4 8.9 25.1 116.6 150.9 30.4
4 in. 22220 3⁄4
QAAPF20A400S 4.25 8.78 6.00 10.88 13.38 2.25 14.88 4.31 1.40 1.63 5.13 2.97 0.35 0.99 4.59 5.94 67
QAPF20A100S
100 mm
QAAPF20A100S
QAAPF22A110S 110 mm
QAAPF22A407S 4 7 ⁄ 16 in. 120.7 233.4 160.0 301.8 368.3 63.5 409.7 120.7 40.1 20 140.0 79.5 28.7 158.8 37.2
22222 3⁄4
– – –
QAAPF22A408S 4 1 ⁄ 2 in. 4.75 9.19 6.30 11.88 14.50 2.50 16.13 4.75 1.58 5.51 3.13 1.13 6.25 82
QAAPF22A115S 115 mm
QAAPF26A125S 125 mm
QAAPF26A415S 4 15 ⁄ 16 in. 139.7 279.7 175.0 349.3 403.4 69.9 444.5 128.0 39.1 24 158.5 94.5 36.8 189.0 60.8
22226 7⁄8
– – –
QAAPF26A500S 5 in. 5.50 11.01 6.89 13.75 15.88 2.75 17.50 5.04 1.54 6.24 3.72 1.45 7.44 134
QAAPF26A130S 130 mm
(1)

CL Series • QAPR and QAAPR Four-Bolt Pillow Blocks
QAPR and QAAPR Four-Bolt Pillow Blocks

A B C D min. D max. E F G H J KA L M RA RAA SA S AA Wt.
QAPR13A060S
60 mm
QAAPR13A060S
QAPR13A207S
2 7 ⁄ 16 in.
QAAPR13A207S 69.9 147.3 96.8 181.1 222.3 47.8 260.4 82.6 24.9 16 31.5 95.8 54.6 5.3 17.8 86.1 109.2 9.1
22213 5⁄8
QAPR13A208S 2.75 5.80 3.81 7.13 8.75 1.88 10.25 3.25 0.98 1.24 3.77 2.15 0.21 0.70 3.39 4.30 20
2 1⁄2 in.
QAAPR13A208S
QAPR13A065S
65 mm
QAAPR13A065S
QAPR15A211S
2 11 ⁄ 16 in.
QAAPR15A211S
QAPR15A212S
2 3 ⁄ 4 in.
QAAPR15A212S
QAPR15A070S
70 mm
QAAPR15A070S 79.5 164.3 109.0 203.2 243.8 54.1 275.1 85.9 29.5 16 31.8 102.1 60.2 6.1 22.4 91.9 120.4 12.2
22215 5⁄8
QAPR15A215S 3.13 6.47 4.29 8.00 9.60 2.13 10.83 3.38 1.16 1.25 4.02 2.37 0.24 0.88 3.62 4.74 27
2 15 ⁄ 16 in.
QAAPR15A215S
QAPR15A300S
3 in.
QAAPR15A300S
QAPR15A075S
75 mm
QAAPR15A075S
QAPR18A303S
3 3 ⁄ 16 in.
QAAPR18A303S
QAPR18A304S
3 1 ⁄ 4 in.
QAAPR18A304S
QAPR18A080S
80 mm
QAAPR18A080S
QAPR18A085S 95.3 195.3 130.3 235.0 285.8 60.5 346.2 95.3 39.6 20 36.6 113.5 65.8 7.9 21.3 102.4 131.6 22.2
85 mm 22218 3⁄4
QAAPR18A085S 3.75 7.69 5.13 9.25 11.25 2.38 13.63 3.75 1.56 1.44 4.47 2.59 0.31 0.84 4.03 5.18 49
QAPR18A307S
3 7 ⁄ 16 in.
QAAPR18A307S
QAPR18A308S
3 1 ⁄ 2 in.
QAAPR18A308S
QAPR18A090S
90 mm
QAAPR18A090S
(1)

CL Series • QAAPX 5000 Series Four-Bolt Pillow Blocks
QAAPX 5000 Series Four-Bolt Pillow Blocks

A B C D min. D max. E F G H J L M R S Wt.
QAAPX13A060S 60 mm
QAAPX13A207S 2 7 ⁄ 16 in. 76.2 153.7 96.8 176.3 242.8 66.8 285.8 98.6 31.0 20 103.9 54.6 17.8 109.2 13.2
22213 3⁄4
QAAPX13A208S 2 1 ⁄ 2 in. 3.00 6.05 3.81 6.94 9.56 2.63 11.25 3.88 1.22 4.09 2.15 0.70 4.30 29
QAAPX13A065S 65 mm
QAAPX15A211S 2 11 ⁄ 16 in.
QAAPX15A212S 2 3 ⁄ 4 in.
QAAPX15A070S 70 mm 88.9 173.5 109.0 230.1 265.2 69.9 330.2 108.0 39.1 20 114.3 60.2 21.3 120.4 20.4
22215 3⁄4
QAAPX15A215S 2 15 ⁄ 16 in. 3.50 6.83 4.29 9.06 10.44 2.75 13.00 4.25 1.54 4.50 2.37 0.84 4.74 45
QAAPX15A300S 3 in.
QAAPX15A075S 75 mm
QAAPX18A303S 3 3 ⁄ 16 in.
QAAPX18A304S 3 1 ⁄ 4 in.
QAAPX18A080S 80 mm
101.6 201.2 130.3 274.6 309.6 76.2 381.0 120.7 38.1 20 126.2 65.8 21.3 131.6 29.0
QAAPX18A085S 85 mm 22218 3⁄4
4.00 7.92 5.13 10.81 12.19 3.00 15.00 4.75 1.50 4.97 2.59 0.84 5.18 64
QAAPX18A307S 3 7 ⁄ 16 in.
QAAPX18A308S 3 1 ⁄ 2 in.
QAAPX18A090S 90 mm
QAAPX20A315S 3 15 ⁄ 16 in.
127.0 239.8 152.4 317.5 355.6 88.9 425.5 139.7 41.4 24 145.0 75.2 25.4 150.4 44.9
QAAPX20A400S 4 in. 22220 7⁄8
5.00 9.44 6.00 12.50 14.00 3.50 16.75 5.50 1.63 5.71 2.96 1.00 5.92 99
QAAPX20A100S 100 mm
QAAPX22A110S 110 mm
QAAPX22A407S 4 7 ⁄ 16 in. 146.1 273.8 159.8 354.1 395.2 101.6 469.9 158.8 45.7 24 158.8 79.5 28.7 158.8 63.0
22222
QAAPX22A408S 4 1 ⁄ 2 in. 5.75 10.78 6.29 13.94 15.56 4.00 18.50 6.25 1.80 1 6.25 3.13 1.13 6.25 139
QAAPX22A115S 115 mm
QAAPX26A125S 125 mm
QAAPX26A415S 4 15 ⁄ 16 in. 155.7 283.2 174.8 387.4 425.5 108.0 514.4 171.5 50.8 28.6 180.3 94.5 37.3 189.0 67.6
22226
QAAPX26A500S 5 in. 6.13 11.15 6.88 15.25 16.75 4.25 20.25 6.75 2.00 1 1⁄8 7.10 3.72 1.47 7.44 149
QAAPX26A130S 130 mm
(1)

CL Series • QAC and QAAC Piloted Flange Cartridges
QAC and QAAC Piloted Flange Cartridges
Bearing Shaft Bearing B B L L

B.C. C D E F G(2) H J KA M N RA R AA SA S AA Wt.
Part No.(1) Dia. No. Fix Exp FIX EXP
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm kg
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs.
QAC08A035S 35 mm
49.8 51.8 111.3 60.5 92.2 78.5 133.4 92.1 12.7 10 25.4 73.7 75.7 44.5 23.9 3.8 69.9 3.6
QAC08A107S 1 7 ⁄ 16 in. 22208 7 ⁄ 16
– –
1.96 2.04 4.38 2.38 3.63 3.09 5.25 3.625 0.50 1.00 2.90 2.98 1.75 0.94 0.15 2.75 8
QAC08A108S 1 1 ⁄ 2 in.
QAC09A040S 40 mm
QAC09A111S 1 11 ⁄ 16 in. 54.6 56.6 130.3 66.8 111.3 91.9 155.7 108.0 12.7 10 25.4 77.0 78.2 47.8 22.4 3.8 73.2 4.1
22209 7 ⁄ 16
– –
QAC09A112S 1 3 ⁄ 4 in. 2.15 2.23 5.13 2.63 4.38 3.62 6.13 4.250 0.50 1.00 3.03 3.08 1.88 0.88 0.15 2.88 9
QAC09A045S 45 mm
QAC10A115S
1 15 ⁄ 16 in.
QAAC10A115S
QAC10A200S 50.5 52.6 136.7 73.2 113.5 96.5 162.1 114.3 16.0 10 25.4 77.5 79.5 47.5 26.9 4.6 18.5 72.9 95.3 4.5
2 in. 22210 7 ⁄ 16
QAAC10A200S 1.99 2.07 5.38 2.88 4.47 3.80 6.38 4.500 0.63 1.00 3.05 3.13 1.87 1.06 0.18 0.73 2.87 3.75 10
QAC10A050S
50 mm
QAAC10A050S
QAC11A203S
2 3 ⁄ 16 in.
QAAC11A203S
QAC11A204S 54.4 56.4 152.4 82.6 127.0 107.7 185.4 127.0 14.7 12 28.7 83.1 85.1 50.8 28.7 3.6 18.5 79.5 101.6 5.9
2 1 ⁄ 4 in. 22211 1⁄2
QAAC11A204S 2.14 2.22 6.00 3.25 5.00 4.24 7.30 5.000 0.58 1.13 3.27 3.35 2.00 1.13 0.14 0.73 3.13 4.00 13
QAC11A055S
55 mm
QAAC11A055S
QAC13A060S
60 mm
QAAC13A060S
QAC13A207S
2 7 ⁄ 16 in.
QAAC13A207S 60.5 62.5 165.1 96.8 139.7 116.8 193.8 139.7 17.5 12 31.5 88.9 90.9 54.6 28.7 3.0 20.3 86.1 109.2 7.3
22213 1⁄2
2.38 2.46 6.50 3.81 5.50 4.60 7.63 5.500 0.69 1.24 3.50 3.58 2.15 1.13 0.12 0.80 3.39 4.30 16
QAC13A208S
2 1 ⁄ 2 in.
QAAC13A208S
QAC13A065S
65 mm
QAAC13A065S
(1)
(2)
Six-bolt housing.
(3)

CL Series • QAC and QAAC Piloted Flange Cartridges


Part No.(1) Dia. No. Fix Exp FIX EXP
QAC15A211S
2 11 ⁄ 16 in.
QAAC15A211S
QAC15A212S
2 3 ⁄ 4 in.
QAAC15A212S
QAC15A070S
70 mm
QAAC15A070S 62.5 64.5 190.5 109.0 162.1 134.6 222.3 161.9 20.6 16 31.8 94.2 96.3 60.2 31.8 2.3 21.6 91.9 120.4 10.0
22215 5⁄8
QAC15A215S 2.46 2.54 7.50 4.29 6.38 5.30 8.75 6.375 0.81 1.25 3.71 3.79 2.37 1.25 0.09 0.85 3.62 4.74 22
2 15 ⁄ 16 in.
QAAC15A215S
QAC15A300S
3 in.
QAAC15A300S
QAC15A075S
75 mm
QAAC15A075S
QAC18A303S
3 3 ⁄ 16 in.
QAAC18A303S
QAC18A304S
3 1 ⁄ 4 in.
QAAC18A304S
QAC18A080S
80 mm
QAAC18A080S
QAC18A085S 73.2 75.2 219.2 130.3 187.5 154.9 262.6 187.3 25.4 20 36.6 106.4 108.5 65.8 33.3 4.1 25.1 102.4 131.6 14.5
85 mm 22218 3⁄4
QAAC18A085S 2.88 2.96 8.63 5.13 7.38 6.10 10.34 7.375 1.00 1.44 4.19 4.27 2.59 1.31 0.16 0.99 4.03 5.18 32
QAC18A307S
3 7 ⁄ 16 in.
QAAC18A307S
QAC18A308S
3 1 ⁄ 2 in.
QAAC18A308S
QAC18A090S
90 mm
QAAC18A090S
QAC20A315S
3 15 ⁄ 16 in.
QAAC20A315S
QAC20A400S 72.1 74.2 238.3 152.4 206.5 168.4 276.4 206.4 25.4 20 41.4 126.0 128.0 75.4 54.1 9.4 24.9 116.6 150.9 19.5
4 in. 22220 3⁄4
QAAC20A400S 2.84 2.92 9.38 6.00 8.13 6.63 10.88 8.125 1.00 1.63 4.96 5.04 2.97 2.13 0.37 0.98 4.59 5.94 43
QAC20A100S
100 mm
QAAC20A100S
QAAC22A110S 110 mm
QAAC22A407S(3) 4 7 ⁄ 16 in. 78.0 80.0 298.5 160.0 254.0 149.4 342.9 260.4 25.4 20 126.2 128.3 79.5 48.3 32.8 158.8 32.7
22222 3 ⁄ 4 (3)
– – –
QAAC22A408S(3) 4 1 ⁄ 2 in. 3.07 3.15 11.75(3) 6.30 10.00 5.88(3) 13.50 10.250 1.00 4.97 5.05 3.13 1.90 1.29 6.25 72
QAAC22A115S(3) 115 mm
(1)

(2)
Six-bolt housing.
(3)

CL Series • QACW and QAACW Piloted Flange Cartridges
QACW and QAACW Piloted Flange Cartridges

Part No.(1) Dia. No. FIX EXP FIX EXP
QACW08A035S 35 mm
38.9 40.9 111.3 60.5 92.2 78.5 133.4 92.1 12.7 10 25.4 73.7 75.7 44.5 35.1 3.8 69.9 3.6
QACW08A107S 1 7 ⁄ 16 in. 22208 7 ⁄ 16
– –
1.53 1.61 4.38 2.38 3.63 3.09 5.25 3.625 0.50 1.00 2.90 2.98 1.75 1.38 0.15 2.75 8
QACW08A108S 1 1 ⁄ 2 in.
QACW09A040S 40 mm
QACW09A111S 1 11 ⁄ 16 in. 38.9 40.1 130.3 66.8 111.3 91.9 155.7 108.0 10.2 10 25.4 77.0 78.2 47.8 38.1 4.1 73.2 4.1
22209 7 ⁄ 16
– –
QACW09A112S 1 3 ⁄ 4 in. 1.53 1.58 5.13 2.63 4.38 3.62 6.13 4.250 0.40 1.00 3.03 3.08 1.88 1.5 0.16 2.88 9
QACW09A045S 45 mm
QACW10A115S
1 15 ⁄ 16 in.
QAACW10A115S
QACW10A200S 35.3 37.3 136.7 73.2 113.5 96.5 162.1 114.3 9.7 10 25.4 73.4 75.4 47.5 38.1 0.5 22.6 72.9 95.3 4.5
2 in. 22210 7 ⁄ 16
QAACW10A200S 1.39 1.47 5.38 2.88 4.47 3.80 6.38 4.500 0.38 1.00 2.89 2.97 1.87 1.50 0.02 0.89 2.87 3.75 10
QACW10A050S
50 mm
QAACW10A050S
QACW11A203S
2 3 ⁄ 16 in.
QAACW11A203S
QACW11A204S 38.9 40.9 152.4 82.6 126.7 107.7 181.1 127.0 14.2 12 28.7 80.3 82.3 50.8 41.4 0.8 14.7 79.5 101.6 5.9
2 1 ⁄ 4 in. 22211 1⁄2
QAACW11A204S 1.53 1.61 6.00 3.25 4.99 4.24 7.13 5.000 0.56 1.13 3.16 3.24 2.00 1.63 0.03 0.58 3.13 4.00 13
QACW11A055S
55 mm
QAACW11A055S
QACW13A060S
60 mm
QAACW13A060S
QACW13A207S
2 7 ⁄ 16 in.
QAACW13A207S 47.2 49.3 165.1 96.8 139.7 116.8 193.8 139.7 12.7 12 31.5 90.2 92.2 54.6 42.9 4.3 19.1 86.1 109.2 7.3
22213 1⁄2
QACW13A208S 1.86 1.94 6.50 3.81 5.50 4.60 7.63 5.500 0.50 1.24 3.55 3.63 2.15 1.69 0.17 0.75 3.39 4.30 16
2 1 ⁄ 2 in.
QAACW13A208S
QACW13A065S
65 mm
QAACW13A065S
QACW15A211S
2 11 ⁄ 16 in.
QAACW15A211S
QACW15A212S
2 3 ⁄ 4 in.
QAACW15A212S
QACW15A070S
70 mm
QAACW15A070S 46.0 48.0 190.5 109.0 162.1 134.6 222.3 161.9 12.7 16 31.8 93.5 95.5 60.2 47.8 1.5 26.9 91.9 120.4 10.0
22215 5⁄8
QACW15A215S 1.81 1.89 7.50 4.29 6.38 5.30 8.75 6.375 0.50 1.25 3.68 3.76 2.37 1.88 0.06 1.06 3.62 4.74 22
2 15 ⁄ 16 in.
QAACW15A215S
QACW15A300S
3 in.
QAACW15A300S
QACW15A075S
75 mm
QAACW15A075S
(1)
(2)
Six-bolt housing.
(3)

CL Series • QACW and QAACW Piloted Flange Cartridges


Part No.(1) Dia. No. FIX EXP FIX EXP
QACW18A303S
3 3 ⁄ 16 in.
QAACW18A303S
QACW18A304S
3 1 ⁄ 4 in.
QAACW18A304S
QACW18A080S
80 mm
QAACW18A080S
QACW18A085S 58.2 60.2 219.2 130.3 187.5 154.9 260.4 187.3 22.4 20 36.6 105.9 108.0 65.8 47.8 3.3 21.3 102.4 131.6 14.5
85 mm 22218 3⁄4
QAACW18A085S 2.29 2.37 8.63 5.13 7.38 6.10 10.25 7.375 0.88 1.44 4.17 4.25 2.59 1.88 0.13 0.84 4.03 5.18 32
QACW18A307S
3 7 ⁄ 16 in.
QAACW18A307S
QACW18A308S
3 1 ⁄ 2 in.
QAACW18A308S
QACW18A090S
90 mm
QAACW18A090S
QACW20A315S
3 15 ⁄ 16 in.
QAACW20A315S
QACW20A400S 65.5 67.6 238.3 152.4 206.5 168.4 276.4 206.4 25.4 20 41.4 123.4 125.5 75.4 57.9 6.9 30.2 116.6 150.9 19.5
4 in. 22220 3⁄4
QAACW20A400S 2.58 2.66 9.38 6.00 8.13 6.63 10.88 8.125 1.00 1.63 4.86 4.94 2.97 2.28 0.27 1.19 4.59 5.94 43
QACW20A100S
100 mm
QAACW20A100S
QAACW22A110S 110 mm
QAACW22A407S(3) 4 7 ⁄ 16 in. 62.0 64.0 298.5 160.0 254.0 149.4 342.9 260.4 25.4 20 130.0 132.1 79.5 68.3 28.7 158.8 32.7
22222 3 ⁄ 4 (3)
– – –
QAACW22A408S(3) 4 1 ⁄ 2 in. 2.44 2.52 11.75(3) 6.30 10.00 5.88(3) 13.50 10.250 1.00 5.12 5.20 3.13 2.69 1.13 6.25 72
QAACW22A115S(3) 115 mm
QAACW26A415S(3) 4 15 ⁄ 16 in. 73.7 75.7 323.9 175.0 266.7 162.1 374.7 279.4 26.2 24 153.2 155.2 94.5 78.0 35.8 189.0 46.3
22226 7 ⁄ 8 (3)
– – –
QAACW26A500S(3) 5 in. 2.90 2.98 12.75(3) 6.89 10.50 6.38(3) 14.75 11.000 1.03 6.03 6.11 3.72 3.07 1.41 7.44 102
(1)
(2)
Six-bolt housing.
(3)

CL Series • QAF and QAAF Square Flange Blocks
QAF and QAAF Square Flange Blocks

B.C. C D E F H J KA M N RA R AA SA S AA Wt.
Part No.(1) Dia. No. FIX EXP
QAF08A035S 35 mm 125.7 60.5 93.7 88.9 117.6 22.4 12 25.4 72.9 74.9 44.5 57.2 3.0 69.9 4.5
22208 1⁄2
– –
QAF08A107S 1 7 ⁄ 16 in. 4.95 2.38 3.69 3.50 4.63 0.88 1.00 2.87 2.95 1.75 2.25 0.12 2.75 10
148.3 60.5 108.0 104.9 136.7 22.4 12 25.4 73.7 75.7 44.5 59.4 3.8 69.9 4.5
QAF08A108S 1 1 ⁄ 2 in. 22208 1⁄2
– –
5.84 2.38 4.25 4.13 5.38 0.88 1.00 2.90 2.98 1.75 2.34 0.15 2.75 10
QAF09A040S 40 mm 148.3 66.8 118.4 104.9 136.7 22.4 12 25.4 79.5 81.5 47.8 63.5 6.4 73.2 5.0
22209 1⁄2
– –
QAF09A111S 1 11 ⁄ 16 in. 5.84 2.63 4.66 4.13 5.38 0.88 1.00 3.13 3.21 1.88 2.50 0.25 2.88 11
QAF09A112S 1 3 ⁄ 4 in. 157.2 66.8 118.4 111.3 143.0 22.4 12 25.4 79.5 81.5 47.8 63.5 6.4 73.2 5.0
22209 1⁄2
– –
QAF09A045S 45 mm 6.19 2.63 4.66 4.38 5.63 0.88 1.00 3.13 3.21 1.88 2.50 0.25 2.88 11
QAF10A115S
1 15 ⁄ 16 in.
QAAF10A115S
QAF10A200S 157.2 73.2 120.7 111.3 139.7 22.4 12 25.4 80.8 82.8 47.5 65.0 7.9 15.2 72.9 95.3 5.0
2 in. 22210 1⁄2
QAAF10A200S 6.19 2.88 4.75 4.38 5.50 0.88 1.00 3.18 3.26 1.87 2.56 0.31 0.60 2.87 3.75 11
QAF10A050S
50 mm
QAAF10A050S
QAF11A203S
2 3 ⁄ 16 in.
QAAF11A203S
QAF11A204S 175.0 82.6 130.3 124.0 157.2 25.4 16 28.7 83.1 85.1 50.8 66.8 3.8 18.5 79.5 101.6 6.4
2 1 ⁄ 4 in. 22211 5⁄8
QAAF11A204S 6.89 3.25 5.13 4.88 6.19 1.00 1.13 3.27 3.35 2.00 2.63 0.15 0.73 3.13 4.00 14
QAF11A055S
55 mm
QAAF11A055S
QAF13A060S
60 mm
QAAF13A060S
QAF13A207S
2 7 ⁄ 16 in.
QAAF13A207S 193.0 96.8 146.1 136.7 168.4 25.4 16 31.5 89.2 91.2 54.6 72.4 3.0 20.1 86.1 109.2 7.7
22213 5⁄8
QAF13A208S 7.60 3.81 5.75 5.38 6.63 1.00 1.24 3.51 3.59 2.15 2.85 0.12 0.79 3.39 4.30 17
2 1 ⁄ 2 in.
QAAF13A208S
QAF13A065S
65 mm
QAAF13A065S
(1)
double-collar units (use S AA and R AA dimensions). Continued on next page.

CL Series • QAF and QAAF Square Flange Blocks


B.C. C D E F H J KA M N RA R AA SA S AA Wt.
QAF15A211S
2 11 ⁄ 16 in.
QAAF15A211S
QAF15A212S
2 3 ⁄ 4 in.
QAAF15A212S
QAF15A070S
70 mm
QAAF15A070S 215.4 109.0 168.9 152.4 189.0 26.9 20 31.8 95.8 97.8 60.2 76.2 3.8 24.6 91.9 120.4 10.4
22215 3⁄4
QAF15A215S 8.48 4.29 6.65 6.00 7.44 1.06 1.25 3.77 3.85 2.37 3.00 0.15 0.97 3.62 4.74 23
2 15 ⁄ 16 in.
QAAF15A215S
QAF15A300S
3 in.
QAAF15A300S
QAF15A075S
75 mm
QAAF15A075S
QAF18A303S
3 3 ⁄ 16 in.
QAAF18A303S
QAF18A304S
3 1 ⁄ 4 in.
QAAF18A304S
QAF18A080S
80 mm
QAAF18A080S
QAF18A085S 251.7 130.3 193.8 177.8 219.2 33.3 20 36.6 107.2 109.2 65.8 84.1 4.8 24.4 102.4 131.6 15.9
85 mm 22218 3⁄4
QAAF18A085S 9.91 5.13 7.63 7.00 8.63 1.31 1.44 4.22 4.30 2.59 3.31 0.19 0.96 4.03 5.18 35
QAF18A307S
3 7 ⁄ 16 in.
QAAF18A307S
QAF18A308S
3 1 ⁄ 2 in.
QAAF18A308S
QAF18A090S
90 mm
QAAF18A090S
QAF20A315S
3 15 ⁄ 16 in.
QAAF20A315S
QAF20A400S 278.4 152.4 224.0 196.9 253.2 38.1 24 41.4 126.0 128.0 75.4 103.1 9.4 24.1 116.6 150.4 24.9
4 in. 22220 7⁄8
QAAF20A400S 10.96 6.00 8.82 7.75 9.97 1.50 1.63 4.96 5.04 2.97 4.06 0.37 0.95 4.59 5.92 55
QAF20A100S
100 mm
QAAF20A100S
QAAF22A110S 110 mm
QAAF22A407S 4 7 ⁄ 16 in. 314.5 160.0 222.3 222.3 276.4 38.1 24 135.6 137.7 79.5 106.9 23.4 158.8 28.6
22222 7⁄8
– – –
QAAF22A408S 4 1 ⁄ 2 in. 12.38 6.30 8.75 8.75 10.88 1.50 5.34 5.42 3.13 4.21 0.92 6.25 63
QAAF22A115S 115 mm
(1)

CL Series • QAFL and QAAFL Square Flange Blocks
QAFL and QAAFL Square Flange Blocks

B.C. C D E F G(2) (3) (4) H J KA M N RA R AA SA S AA Wt.
QAFL08A035S 35 mm
127.0 60.5 93.7 89.9 117.6 N/A 22.4 12 25.4 72.9 74.9 44.5 57.2 3.0 69.9 4.5
QAFL08A107S 1 7 ⁄ 16 in. 22208 1⁄2
– –
5.00 2.38 3.69 3.54 4.63 N/A 0.88 1.00 2.87 2.95 1.75 2.25 0.12 2.75 10
QAFL08A108S 1 1 ⁄ 2 in.
QAFL09A040S 40 mm
QAFL09A111S 1 11 ⁄ 16 in. 139.7 66.8 118.4 98.8 136.7 N/A 22.4 12 25.4 79.5 81.5 47.8 63.5 6.6 73.2 5.0
22209 1⁄2
– –
QAFL09A112S 1 3 ⁄ 4 in. 5.50 2.63 4.66 3.89 5.38 N/A 0.88 1.00 3.13 3.21 1.88 2.50 0.26 2.88 11
QAFL09A045S 45 mm
QAFL10A115S
1 15 ⁄ 16 in.
QAAFL10A115S
QAFL10A200S 146.1 73.2 120.7 103.4 131.8 23.1 12 25.4 80.8 82.8 47.5 62.5 7.9 15.2 72.9 95.3 5.0
2 in. 22210 N/A 1⁄2
QAAFL10A200S 5.75 2.88 4.75 4.07 5.19 0.91 1.00 3.18 3.26 1.87 2.46 0.31 0.60 2.87 3.75 11
QAFL10A050S
50 mm
QAAFL10A050S
QAFL11A203S
2 3 ⁄ 16 in.
QAAFL11A203S
QAFL11A204S 162.1 82.6 131.8 114.3 149.4 19.1 16 28.7 83.3 85.3 50.8 66.8 3.8 18.3 79.5 101.6 6.4
2 1 ⁄ 4 in. 22211 N/A 5⁄8
QAAFL11A204S 6.38 3.25 5.19 4.50 5.88 0.75 1.13 3.28 3.36 2.00 2.63 0.15 0.72 3.13 4.00 14
QAFL11A055S
55 mm
QAAFL11A055S
QAFL13A060S
60 mm
QAAFL13A060S
QAFL13A207S
2 7 ⁄ 16 in.
QAAFL13A207S 171.5 96.8 146.1 121.2 157.2 25.4 16 31.5 89.2 91.2 54.6 72.6 3.0 20.1 86.1 109.2 7.7
22213 N/A 5⁄8
QAFL13A208S 6.75 3.81 5.75 4.77 6.19 1.00 1.24 3.51 3.59 2.15 2.86 0.12 0.79 3.39 4.30 17
2 1 ⁄ 2 in.
QAAFL13A208S
QAFL13A065S
65 mm
QAAFL13A065S
(1)
(2)
(3)
Piloted flange blocks will be quoted (price and delivery) upon request. For optional spigot on flange side, insert
(4)
the letter P as seen in the following example: QMFP**J***S.

CL Series • QAFL and QAAFL Square Flange Blocks

B.C. C D E F G(2) (3) (4) H J KA M N RA R AA SA S AA Wt.
QAFL15A211S
2 11 ⁄ 16 in.
QAAFL15A211S
QAFL15A212S
2 3 ⁄ 4 in.
QAAFL15A212S
QAFL15A070S
70 mm
QAAFL15A070S 200.2 109.0 168.4 141.2 182.6 26.9 20 31.8 95.8 97.8 60.2 74.4 3.8 24.6 91.9 120.4 10.4
22215 N/A 3⁄4
QAFL15A215S 7.88 4.29 6.63 5.56 7.19 1.06 1.25 3.77 3.85 2.37 2.93 0.15 0.97 3.62 4.74 23
2 15 ⁄ 16 in.
QAAFL15A215S
QAFL15A300S
3 in.
QAAFL15A300S
QAFL15A075S
75 mm
QAAFL15A075S
QAFL18A303S
3 3 ⁄ 16 in.
QAAFL18A303S
QAFL18A304S
3 1 ⁄ 4 in.
QAAFL18A304S
QAFL18A080S
80 mm
QAAFL18A080S
QAFL18A085S 241.3 130.3 193.8 170.7 212.9 187.33 32.5 20 36.6 106.4 108.5 65.8 86.4 4.1 25.1 102.4 131.6 15.9
85 mm 22218 3⁄4
QAAFL18A085S 9.50 5.13 7.63 6.72 8.38 7.375 1.28 1.44 4.19 4.27 2.59 3.40 0.16 0.99 4.03 5.18 35
QAFL18A307S
3 7 ⁄ 16 in.
QAAFL18A307S
QAFL18A308S
3 1 ⁄ 2 in.
QAAFL18A308S
QAFL18A090S
90 mm
QAAFL18A090S
QAFL20A315S
3 15 ⁄ 16 in.
QAAFL20A315S
QAFL20A400S 273.1 152.4 229.6 193.0 241.3 215.90 38.1 24 41.4 132.3 134.4 75.4 104.6 15.7 18.0 116.6 150.4 24.9
4 in. 22220
QAAFL20A400S 10.75 6.00 9.04 7.60 9.50 8.500 1.50 1 1.63 5.21 5.29 2.97 4.12 0.62 0.71 4.59 5.92 55
QAFL20A100S
100 mm
QAAFL20A100S
(1)

(2)
(3)
(4)

CL Series • QAAFX 5000 Series Flange Blocks
QAAFX 5000 Series Flange Blocks

B.C. C D E F G (1) (2) (3) H J M N R S Wt.
Part No. Dia. No. FIX EXP
QAAFX10A115S 1 15 ⁄ 16 in.
146.1 73.2 120.7 103.1 134.9 111.13 22.4 12 80.8 82.8 47.5 65.0 15.2 95.3 5.4
QAAFX10A200S 2 in. 22210 1⁄2
5.75 2.88 4.75 4.06 5.31 4.375 0.88 3.18 3.26 1.87 2.56 0.60 3.75 12
QAAFX10A050S 50 mm
QAAFX11A203S 2 3 ⁄ 16 in.
161.5 82.6 130.3 114.3 149.4 127.00 25.4 16 83.1 85.1 50.5 66.8 18.5 101.6 6.8
QAAFX11A204S 2 1 ⁄ 4 in. 22211 5⁄8
6.36 3.25 5.13 4.50 5.88 5.000 1.00 3.27 3.35 1.99 2.63 0.73 4.00 15
QAAFX11A055S 55 mm
QAAFX13A060S 60 mm
QAAFX13A207S 2 7 ⁄ 16 in. 180.8 96.8 146.1 127.8 157.2 138.13 25.4 16 89.2 91.2 54.6 72.4 19.6 109.2 8.6
22213 5⁄8
QAAFX13A208S 2 1 ⁄ 2 in. 7.12 3.81 5.75 5.03 6.19 5.438 1.00 3.51 3.59 2.15 2.85 0.77 4.30 19
QAAFX13A065S 65 mm
QAAFX15A211S 2 11 ⁄ 16 in.
QAAFX15A212S 2 3 ⁄ 4 in.
QAAFX15A070S 70 mm 215.9 109.0 168.9 152.7 189.0 160.35 26.9 20 96.0 98.0 60.2 76.2 24.4 120.4 12.7
22215 3⁄4
QAAFX15A215S 2 15 ⁄ 16 in. 8.50 4.29 6.65 6.01 7.44 6.313 1.06 3.78 3.86 2.37 3.00 0.96 4.74 28
QAAFX15A300S 3 in.
QAAFX15A075S 75 mm
QAAFX18A303S 3 3 ⁄ 16 in.
QAAFX18A304S 3 1 ⁄ 4 in.
QAAFX18A080S 80 mm
241.3 130.3 193.8 170.7 212.9 187.33 33.3 20 107.2 109.2 65.8 84.1 24.6 131.6 19.1
QAAFX18A085S 85 mm 22218 3⁄4
9.50 5.13 7.63 6.72 8.38 7.375 1.31 4.22 4.30 2.59 3.31 0.97 5.18 42
QAAFX18A307S 3 7 ⁄ 16 in.
QAAFX18A308S 3 1 ⁄ 2 in.
QAAFX18A090S 90 mm
QAAFX20A315S 3 15 ⁄ 16 in.
298.5 152.4 215.9 211.1 268.2 225.43 38.1 24 126.0 128.0 75.4 103.1 24.6 150.4 29.9
QAAFX20A400S 4 in. 22220 7⁄8
11.75 6.00 8.50 8.31 10.56 8.875 1.50 4.96 5.04 2.97 4.06 0.97 5.92 66
QAAFX20A100S 100 mm
QAAFX22A110S 110 mm
QAAFX22A407S(4) 4 7 ⁄ 16 in. 327.2 160.0 256.5 163.6 384.3 263.53 31.8 24 143.8 145.8 94.0 106.9 15.0 158.8 46.3
22222 7⁄8
QAAFX22A408S(4) 4 1 ⁄ 2 in. 12.88 (4) 6.30 10.10 6.44 (4) 15.13 10.375 1.25 5.66 5.74 3.70 4.21 0.59 6.25 102
QAAFX22A115S(4) 115 mm
QAAFX26A415S(4) 4 15 ⁄ 16 in. 355.6 175.0 284.2 177.8 419.1 284.18 38.1 24 174.8 176.8 94.5 135.1 14.2 189.0 52.2
22226
QAAFX26A500S(4) 5 in. 14.00 (4) 6.89 11.19 7.00 (4) 16.50 11.188 1.50 1 6.88 6.96 3.72 5.32 0.56 7.44 115
(1)
(2)
(3)
(4)

CL Series • QAFY and QAAFY Round Flange Blocks
QAFY and QAAFY Round Flange Blocks

B.C. C D E F G(2)(3)(4) H J KA M N RA R AA SA S AA Wt.
QAFY08A035S(6) 35 mm
127.0 60.5 108.0 89.9 158.8 90.50 19.1 12 25.4 73.2 75.2 44.5 57.4 3.3 69.9 4.5
QAFY08A107S(6) 1 7 ⁄ 16 in. 22208 1⁄2
– –
5.00 2.38 4.25 3.54 6.25 3.563 0.75 1.00 2.88 2.96 1.75 2.26 0.13 2.75 10
QAFY08A108S(6) 1 1 ⁄ 2 in.
QAFY09A040S 40 mm
QAFY09A111S 1 11 ⁄ 16 in. 139.7 66.8 104.9 98.8 171.5 103.20 20.6 12 25.4 76.2 78.2 47.8 60.5 3.0 73.2 5.0
22209 1⁄2
– –
QAFY09A112S 1 3 ⁄ 4 in. 5.50 2.63 4.13 3.89 6.75 4.063 0.81 1.00 3.00 3.08 1.88 2.38 0.12 2.88 11
QAFY09A045S 45 mm
QAFY10A115S
1 15 ⁄ 16 in.
QAAFY10A115S
QAFY10A200S 146.1 73.2 115.3 103.4 177.8 111.13 19.1 12 25.4 75.9 78.0 47.5 57.2 3.0 20.1 72.9 95.3 5.4
2 in. 22210 1⁄2
QAAFY10A200S 5.75 2.88 4.54 4.07 7.00 4.375 0.75 1.00 2.99 3.07 1.87 2.25 0.12 0.79 2.87 3.75 12
QAFY10A050S
50 mm
QAAFY10A050S
QAFY11A203S
2 3 ⁄ 16 in.
QAAFY11A203S
QAFY11A204S 162.1 82.6 130.3 114.3 196.9 127.00 19.1 16 28.7 82.3 84.3 50.8 62.0 3.0 19.3 79.5 101.6 6.8
2 1 ⁄ 4 in. 22211 5⁄8
QAAFY11A204S 6.38 3.25 5.13 4.50 7.75 5.000 0.75 1.13 3.24 3.32 2.00 2.44 0.12 0.76 3.13 4.00 15
QAFY11A055S
55 mm
QAAFY11A055S
QAFY13A060S
60 mm
QAAFY13A060S
QAFY13A207S
2 7 ⁄ 16 in.
QAAFY13A207S 171.5 96.8 146.1 121.2 206.5 138.13 23.9 16 31.5 91.2 93.2 54.6 72.4 5.1 20.6 86.1 109.2 8.6
22213 5⁄8
QAFY13A208S 6.75 3.81 5.75 4.77 8.13 5.438 0.94 1.24 3.59 3.67 2.15 2.85 0.20 0.81 3.39 4.30 19
2 1⁄2 in.
QAAFY13A208S
QAFY13A065S
65 mm
QAAFY13A065S
(1)
(2)
(3)
(4)

Six-bolt housing.
(5)
Three-bolt housing.
(6)

CL Series • QAFY and QAAFY Round Flange Blocks
QAFY and QAAFY Round

Flange Blocks – continued


B.C. C D E F G(2)(3)(4) H J KA M N RA R AA SA S AA Wt.
QAFY15A211S
2 11 ⁄ 16 in.
QAAFY15A211S
QAFY15A212S
2 3 ⁄ 4 in.
QAAFY15A212S
QAFY15A070S
70 mm
QAAFY15A070S 200.2 109.0 168.4 141.5 241.3 160.35 23.9 20 31.8 98.3 100.3 60.2 74.4 6.4 21.8 91.9 120.4 12.7
22215 3⁄4
QAFY15A215S 7.88 4.29 6.63 5.57 9.50 6.313 0.94 1.25 3.87 3.95 2.37 2.93 0.25 0.86 3.62 4.74 28
2 15 ⁄ 16 in.
QAAFY15A215S
QAFY15A300S
3 in.
QAAFY15A300S
QAFY15A075S
75 mm
QAAFY15A075S
QAFY18A303S
3 3 ⁄ 16 in.
QAAFY18A303S
QAFY18A304S
3 1 ⁄ 4 in.
QAAFY18A304S
QAFY18A080S
80 mm
QAAFY18A080S
QAFY18A085S 241.3 130.3 193.8 170.7 282.7 28.7 24 36.6 108.7 110.7 65.8 85.3 6.4 22.9 102.4 131.6 19.1
85 mm 22218 N/A 7⁄8
QAAFY18A085S 9.50 5.13 7.63 6.72 11.13 1.13 1.44 4.28 4.36 2.59 3.36 0.25 0.90 4.03 5.18 42
QAFY18A307S
3 7 ⁄ 16 in.
QAAFY18A307S
QAFY18A308S
3 1 ⁄ 2 in.
QAAFY18A308S
QAFY18A090S
90 mm
QAAFY18A090S
QAFY20A315S
3 15 ⁄ 16 in.
QAAFY20A315S
QAFY20A400S 273.1 152.4 212.9 193.0 320.8 28.7 24 41.4 123.7 125.7 75.4 96.8 6.9 26.7 116.6 150.4 29.9
4 in. 22220 N/A
QAAFY20A400S 10.75 6.00 8.38 7.60 12.63 1.13 1 1.63 4.87 4.95 2.97 3.81 0.27 1.05 4.59 5.92 66
QAFY20A100S
100 mm
QAAFY20A100S
QAAFY22A110S(5) 110 mm
QAAFY22A407S(5) 4 7 ⁄ 16 in. 327.2 160.0 254.0 163.6 384.3 31.8 24 129.0 131.1 79.5 100.3 30.0 158.8 46.3
22222 N/A – – –
QAAFY22A408S(5) 4 1 ⁄ 2 in. 12.88(5) 6.30 10.00 6.44(5) 15.13 1.25 1(5) 5.08 5.16 3.13 3.95 1.18 6.25 102
QAAFY26A415S(5) 4 15 ⁄ 16 in. 355.6 175.0 284.2 177.8 419.1 38.1 27 169.9 172.0 94.5 139.7 19.1 189.0 52.2
22226 N/A – – –
QAAFY26A500S(5) 5 in. 14.00(5) 6.89 11.19 7.00(5) 16.50 1.50 1 1 ⁄ 8 (5) 6.69 6.77 3.72 5.50 0.75 7.44 115
(1)

(2)
(3)
(4)
Six-bolt housing.
(5)
Three-bolt housing.
(6)

CL Series • QAMC and QAAMC Cartridge Blocks
QAMC and QAAMC Cartridge Blocks

A B C D F G KA M RA R AA SA S AA Wt.
QAMC10A115S
1 15 ⁄ 16 in.
QAAMC10A115S 104.78
QAMC10A200S 13.5 23.1 73.2 4.8 (+0/-0.05) 62.2 25.4 79.2 81.3 47.5 6.1 16.8 72.9 95.3 3.6
2 in. 22210
QAAMC10A200S 0.53 0.91 2.88 0.19 4.125 2.45 1.00 3.12 3.20 1.87 0.24 0.66 2.87 3.75 8
QAMC10A050S (+0/-0.002)
50 mm
QAAMC10A050S
QAMC11A203S
2 3 ⁄ 16 in.
QAAMC11A203S 115.09
QAMC11A204S 1⁄4
13.5 23.1 82.6 4.8 (+0/-0.05) 65.5 28.7 83.8 85.9 50.8 4.1 18.0 79.5 101.6 4.5
2 in. 22211
QAAMC11A204S 0.53 0.91 3.25 0.19 4.531 2.58 1.13 3.30 3.38 2.00 0.16 0.71 3.13 4.00 10
QAMC11A055S (+0/-0.002)
55 mm
QAAMC11A055S
QAMC13A060S
60 mm
QAAMC13A060S
QAMC13A207S 127.00
2 7 ⁄ 16 in.
QAAMC13A207S 13.5 23.1 96.8 3.6 (+0/-0.05) 69.3 31.5 85.9 87.9 54.6 0.0 14.0 86.1 109.2 5.4
22213
QAMC13A208S 0.53 0.91 3.81 0.14 5.000 2.73 1.24 3.38 3.46 2.15 0.00 0.55 3.39 4.30 12
2 1 ⁄ 2 in. (+0/-0.002)
QAAMC13A208S
QAMC13A065S
65 mm
QAAMC13A065S
QAMC15A211S
2 11 ⁄ 16 in.
QAAMC15A211S
QAMC15A212S
2 3 ⁄ 4 in.
QAAMC15A212S
QAMC15A070S 149.225
70 mm
QAAMC15A070S 15.0 26.2 109.0 6.4 (+0/-0.05) 79.8 31.8 100.6 102.6 60.2 8.1 19.8 91.9 120.4 8.2
22215
QAMC15A215S 0.59 1.03 4.29 0.25 5.875 3.14 1.25 3.96 4.04 2.37 0.32 0.78 3.62 4.74 18
2 15 ⁄ 16 in.
QAAMC15A215S (+0/-0.002)
QAMC15A300S
3 in.
QAAMC15A300S
QAMC15A075S
75 mm
QAAMC15A075S
(1)

CL Series • QAMC and QAAMC Cartridge Blocks
QAMC and QAAMC Cartridge Blocks – continued


A B C D F G KA M RA R AA SA S AA Wt.
QAMC18A303S
3 3 ⁄ 16 in.
QAAMC18A303S
QAMC18A304S
3 1 ⁄ 4 in.
QAAMC18A304S
QAMC18A080S
80 mm
QAAMC18A080S 171.45
QAMC18A085S 15.0 26.9 130.3 5.8 (+0/-0.05) 87.6 36.6 110.2 112.3 65.8 7.4 21.3 102.4 131.6 11.8
85 mm 22218
QAAMC18A085S 0.59 1.06 5.13 0.23 6.750 3.45 1.44 4.34 4.42 2.59 0.29 0.84 4.03 5.18 26
QAMC18A307S (+0/-0.002)
3 7 ⁄ 16 in.
QAAMC18A307S
QAMC18A308S
3 1 ⁄ 2 in.
QAAMC18A308S
QAMC18A090S
90 mm
QAAMC18A090S
QAMC20A315S
3 15 ⁄ 16 in.
QAAMC20A315S 206.375
QAMC20A400S 19.8 32.5 152.4 7.9 (+0/-0.05) 105.2 41.4 128.3 130.3 75.4 11.4 22.6 116.6 150.9 14.5
4 in. 22220
QAAMC20A400S 0.78 1.28 6.00 0.31 8.125 4.14 1.63 5.05 5.13 2.97 0.45 0.89 4.59 5.94 32
QAMC20A100S (+0/-0.002)
100 mm
QAAMC20A100S
QAAMC22A110S 110 mm
222.25
QAAMC22A407S 4 7⁄ 16 in. 19.8 38.1 160.0 7.9 (+0/-0.08) 108.5 133.6 135.6 79.5 25.1 158.8 18.1
22222 – – –
QAAMC22A408S 4 1 ⁄ 2 in. 0.78 1.50 6.30 0.31 8.75 4.27 5.26 5.34 3.13 0.99 6.25 40
(+0/-0.003)
QAAMC22A115 115 mm
QAAMC26A125S 125 mm
265.13
QAAMC26A415S 4 15 ⁄ 16 in. 19.8 38.1 175.0 7.9 (+0/-0.08) 141.7 165.4 167.4 94.5 23.6 189.0 18.1
22226 – – –
QAAMC26A500S 5 in. 0.78 1.50 6.89 0.31 10.438 5.58 6.51 6.59 3.72 0.93 7.44 40
(+0/-0.003)
QAAMC26A130S 130 mm
(1)

CL Series • QATU and QAATU Take-Up Blocks
QATU and QAATU Take-Up Blocks

A C D E F G J KA L M N P S Wt.
QATU10A115S
1 15 ⁄ 16 in.
QAATU10A115S
QATU10A200S 54.1 19.1 120.7 101.6 26.9 26.9 73.2 25.4 153.4 47.5 75.7 88.9 17.5 7.7
2 in. 22210
QAATU10A200S 2.13 0.75 4.75 4.00 1.06 1.06 2.88 1.00 6.04 1.87 2.98 3.50 0.69 17
QATU10A050S
50 mm
QAATU10A050S
QATU11A203S
2 3 ⁄ 16 in.
QAATU11A203S
QATU11A204S 60.5 19.1 133.4 114.3 28.7 30.2 88.9 28.7 167.9 50.8 81.8 95.3 20.6 9.5
2 1 ⁄ 4 in. 22211
QAATU11A204S 2.38 0.75 5.25 4.50 1.13 1.19 3.50 1.13 6.61 2.00 3.22 3.75 0.81 21
QATU11A055S
55 mm
QAATU11A055S
QATU13A060S
60 mm
QAATU13A060S
QATU13A207S
2 7 ⁄ 16 in.
QAATU13A207S 69.9 22.4 149.4 130.3 33.3 33.3 95.3 31.5 193.8 54.6 91.2 120.7 26.9 12.2
22213
QATU13A208S 2.75 0.88 5.88 5.13 1.31 1.31 3.75 1.24 7.63 2.15 3.59 4.75 1.06 27
2 1 ⁄ 2 in.
QAATU13A208S
QATU13A065S
65 mm
QAATU13A065S
QATU15A211S
2 11 ⁄ 16 in.
QAATU15A211S
QATU15A212S
2 3 ⁄ 4 in.
QAATU15A212S
QATU15A070S
70 mm
QAATU15A070S 76.2 25.4 171.5 150.9 39.6 39.6 108.0 31.8 219.7 60.2 97.0 120.7 46.0 15.9
22215
QATU15A215S 3.00 1.00 6.75 5.94 1.56 1.56 4.25 1.25 8.65 2.37 3.82 4.75 1.81 35
2 15 ⁄ 16 in.
QAATU15A215S
QATU15A300S
3 in.
QAATU15A300S
QATU15A075S
75 mm
QAATU15A075S
Bearing part numbers use QA to designate single-collar units and QAA to designate double-collar units.
(1)
NOTE: Please refer to page C-169 for take-up frames.

CL Series • QATU and QAATU Take-Up Blocks
QATU and QAATU Take-Up Blocks – continued

A C D E F G J KA L M N P S Wt.
QATU18A303S
3 3 ⁄ 16 in.
QAATU18A303S
QATU18A304S
3 1 ⁄ 4 in.
QAATU18A304S
QATU18A080S
80 mm
QAATU18A080S
QATU18A085S 92.2 25.4 193.8 173.0 46.0 47.8 124.0 36.6 257.0 65.8 107.2 158.8 46.0 20.0
85 mm 22218
QAATU18A085S 3.63 1.00 7.63 6.81 1.81 1.88 4.88 1.44 10.12 2.59 4.22 6.25 1.81 44
QATU18A307S
3 7 ⁄ 16 in.
QAATU18A307S
QATU18A308S
3 1 ⁄ 2 in.
QAATU18A308S
QATU18A090S
90 mm
QAATU18A090S
QATU20A315S
3 15 ⁄ 16 in.
QAATU20A315S
QATU20A400S 104.9 28.7 239.8 219.2 54.1 52.3 143.0 41.4 296.9 75.4 121.7 177.8 52.3 26.3
4 in. 22220
QAATU20A400S 4.13 1.13 9.44 8.63 2.13 2.06 5.63 1.63 11.69 2.97 4.79 7.00 2.06 58
QATU20A100S
100 mm
QAATU20A100S
QAATU22A110S 110 mm
QAATU22A407S 4 7 ⁄ 16 in. 128.5 38.1 263.7 241.3 54.1 54.1 162.1 341.4 79.5 143.8 199.9 52.3 36.4
22222 –
QAATU22A408S 4 1 ⁄ 2 in. 5.06 1.50 10.38 9.50 2.13 2.13 6.38 13.44 3.13 5.66 7.87 2.06 80
QAATU22A115S 115 mm
QAATU26A125S 125 mm
QAATU26A415S 4 15 ⁄ 16 in. 134.9 63.5 285.8 260.4 63.5 60.5 177.8 396.7 94.5 150.9 228.6 52.3 60.8
22226 –
QAATU26A500S 5 in. 5.31 2.50 11.25 10.25 2.50 2.38 7.00 15.62 3.72 5.94 9.00 2.06 134
QAATU26A130S 130 mm
Bearing part numbers use QA to designate single-collar units and QAA to designate double-collar units.
(1)

CL Series • QAMH and QAAMH Hanger Blocks
QAMH and QAAMH Hanger Blocks

A B C D E F G J KA L M RA R AA SA S AA Wt.
Part No. Dia. No.
in.
QAMH15A211S
2 11 ⁄ 16 in.
QAAMH15A211S
QAMH15A212S
2 3 ⁄ 4 in.
QAAMH15A212S
QAMH15A070S
70 mm
QAAMH15A070S 131.8 212.9 109.0 162.1 50.8 50.8 69.9 1 - 8UNC 31.8 91.9 60.2 0.0 28.4 91.9 120.7 10.0
22215
QAMH15A215S 5.19 8.38 4.29 6.38 2.00 2.00 2.75 1.25 3.62 2.37 0.00 1.12 3.62 4.75 22
2 15 ⁄ 16 in.
QAAMH15A215S
QAMH15A300S
3 in.
QAAMH15A300S
QAMH15A075S
75 mm
QAAMH15A075S
QAMH18A303S
3 3 ⁄ 16 in.
QAAMH18A303S
QAMH18A304S
3 1 ⁄ 4 in.
QAAMH18A304S
QAMH18A080S
80 mm
QAAMH18A080S
QAMH18A085S 160.3 260.4 130.3 200.2 63.5 76.2 76.2 1 1 ⁄ 4 - 7UNC 36.6 99.3 65.8 3.0 32.3 102.4 131.6 16.3
85 mm 22218
QAAMH18A085S 6.31 10.25 5.13 7.88 2.50 3.00 3.00 1.44 3.91 2.59 0.12 1.27 4.03 5.18 36
QAMH18A307S
3 7 ⁄ 16 in.
QAAMH18A307S
QAMH18A308S
3 1 ⁄ 2 in.
QAAMH18A308S
QAMH18A090S
90 mm
QAAMH18A090S

EC Series

EC Series
EC Series
The reduced eccentric offset of our EC series locking collar You Have Choices
results in a secure shaft lock that is designed not to release from
a properly prepared shaft. EC series housed units also are suitable For the EC series, you can select from many seal configurations
for reversing applications. and housing styles, which are shown on page C-130.
Housings
• Four-bolt pillow blocks.
• Flange blocks.
• Take-up blocks.
• Hanger blocks.
Seals
DuPont Viton (N).
Fig. C-45. EC series eccentric lock.
• Steel and urethane open-end covers (CJ) with:
• Piloted flange cartridge backing plates (HSY) with:

• Flange block backing plates (UFP).

• V-ring (VR).

EC Series
EC Series
Cover Backing Plate
Closed-End UFP
Pillow Block • • • • • • • • • •
Flange Block • • • • • • • • • •
V-Lock
Lock)
Take-Up Block • • • • • • • • • •
Pillow Block • • • • • • • • • •
Flange Block • • • • • • • • • • •
Piloted Flange
(Set Screw Lock)
Take-Up Block • • • • • • • • • •
Hangar Block • • • • • • • • • •
Pillow Block • • • • • • • • • •
Flange Block • • • • • • • • • • •
Piloted Flange
(Eccentric Lock)
Take-Up Block • • • • • • • • • •
Hangar Block • • • • • • • • • •
Pillow Block • • • • • • • • • •

(Tapered Adapter
Cartridge • • • • • • • • • •
Pillow Block • • • • • • • • • •
DV Series
Lock)
Piloted Flange
Cartridge • • • • • • • • • •

EC Series • QMP Two-Bolt Pillow Blocks
QMP Two-Bolt Pillow Blocks

A B C D min. D max. F G H J K L M R S Wt.
Part No. Dia. No.
QMP08J035S 35 mm 47.8 94.7 60.5 119.1 152.4 174.8 57.2 25.4 12 25.4 73.2 44.5 3.3 69.9 4.1
22208 1⁄2
QMP08J107S 1 7 ⁄ 16 in. 1.88 3.73 2.38 4.69 6.00 6.88 2.25 1.00 1.00 2.88 1.75 0.13 2.75 9
54.1 101.1 60.5 119.1 165.1 200.2 57.2 25.4 12 25.4 73.2 44.5 3.3 69.9 4.1
QMP08J108S 1 1 ⁄ 2 in. 22208 1⁄2
2.13 3.98 2.38 4.69 6.50 7.88 2.25 1.00 1.00 2.88 1.75 0.13 2.75 9
54.1 104.9 66.5 144.8 165.1 200.2 60.2 31.8 12 25.4 77.7 47.8 4.8 73.2 4.5
QMP09J111S 1 11 ⁄ 16 in. 22209 1⁄2
2.13 4.13 2.62 5.70 6.50 7.88 2.37 1.25 1.00 3.06 1.88 0.19 2.88 10
QMP09J040S 40 mm
57.2 108.0 66.5 158.8 180.8 225.6 62.0 31.8 16 25.4 78.7 47.8 5.8 73.2 4.5
QMP09J112S 1 3 ⁄ 4 in. 22209 5⁄8
2.25 4.25 2.62 6.25 7.12 8.88 2.44 1.25 1.00 3.10 1.88 0.23 2.88 10
QMP09J045S 45 mm
QMP10J115S 1 15 ⁄ 16 in.
57.2 122.2 71.4 152.4 181.1 225.6 62.0 31.8 16 25.4 79.0 47.5 6.1 72.9 5.9
QMP10J200S 2 in. 22210 5⁄8
2.25 4.81 2.81 6.00 7.13 8.88 2.44 1.25 1.00 3.11 1.87 0.24 2.87 13
QMP10J050S 50 mm
QMP11J203S 2 3 ⁄ 16 in.
63.5 133.4 75.9 165.1 200.2 244.6 66.8 31.8 16 28.7 84.1 50.8 4.8 79.5 7.7
QMP11J204S 2 1 ⁄ 4 in. 22211 5⁄8
2.50 5.25 2.99 6.50 7.88 9.63 2.63 1.25 1.13 3.31 2.00 0.19 3.13 17
QMP11J055S 55 mm
QMP13J060S 60 mm
QMP13J207S 2 7 ⁄ 16 in. 69.9 147.3 91.9 174.8 219.2 260.4 73.7 35.1 16 31.5 91.2 54.1 5.3 85.6 10.0
22213 5⁄8
QMP13J208S 2 1 ⁄ 2 in. 2.75 5.80 3.62 6.88 8.63 10.25 2.90 1.38 1.24 3.59 2.13 0.21 3.37 22
QMP13J065S 65 mm
QMP15J211S 2 11 ⁄ 16 in.
QMP15J212S 2 3 ⁄ 4 in.
QMP15J070S 70 mm 79.5 164.3 101.9 200.2 244.6 295.4 76.2 35.1 20 31.8 98.3 60.2 6.4 91.9 12.7
22215 3⁄4
QMP15J215S 2 15 ⁄ 16 in. 3.13 6.47 4.01 7.88 9.63 11.63 3.00 1.38 1.25 3.87 2.37 0.25 3.62 28
QMP15J300S 3 in.
QMP15J075S 75 mm
QMP18J303S 3 3 ⁄ 16 in.
QMP18J304S 3 1 ⁄ 4 in.
QMP18J080S 80 mm
95.3 195.3 120.9 238.3 285.8 342.9 86.6 47.8 24 36.6 109.2 65.8 7.1 102.4 20.4
QMP18J085S 85 mm 22218 7⁄8
3.75 7.69 4.76 9.38 11.25 13.50 3.41 1.88 1.44 4.30 2.59 0.28 4.03 45
QMP18J307S 3 7 ⁄ 16 in.
QMP18J308S 3 1 ⁄ 2 in.
QMP18J090S 90 mm
QMP20J311S 3 11 ⁄ 16 in.
QMP20J312S 3 3 ⁄ 4 in.
104.9 209.8 152.4 255.0 320.0 362.0 94.7 50.8 24 41.4 122.9 75.2 6.1 116.6 26.8
QMP20J315S 3 15 ⁄ 16 in. 22220
4.13 8.26 6.00 10.04 12.60 14.25 3.73 2.00 1 1.63 4.84 2.96 0.24 4.59 59
QMP20J400S 4 in.
QMP20J100S 100 mm

EC Series • QMPL Two-Bolt Pillow Blocks
QMPL Two-Bolt Pillow Blocks

Part No. Dia. No.
QMPL08J035S 35 mm
47.8 94.7 60.5 119.1 152.4 174.8 57.2 25.4 12 25.4 73.2 44.5 3.3 69.9 4.1
QMPL08J107S 1 7 ⁄ 16 in. 22208 1⁄2
1.88 3.73 2.38 4.69 6.00 6.88 2.25 1.00 1.00 2.88 1.75 0.13 2.75 9
QMPL08J108S 1 1 ⁄ 2 in.
QMPL09J040S 40 mm
QMPL09J111S 1 11 ⁄ 16 in. 54.1 104.9 66.5 133.4 146.1 181.1 60.2 31.8 12 25.4 77.7 47.8 4.8 73.2 4.5
22209 1⁄2
QMPL09J112S 1 3 ⁄ 4 in. 2.13 4.13 2.62 5.25 5.75 7.13 2.37 1.25 1.00 3.06 1.88 0.19 2.88 10
QMPL09J045S 45 mm
QMPL10J115S 1 15 ⁄ 16 in.
57.2 122.2 71.4 150.6 161.5 212.9 62.0 31.8 16 25.4 79.0 47.5 6.1 72.9 5.9
QMPL10J200S 2 in. 22210 5⁄8
2.25 4.81 2.81 5.93 6.36 8.38 2.44 1.25 1.00 3.11 1.87 0.24 2.87 13
QMPL10J050S 50 mm
QMPL11J203S 2 3 ⁄ 16 in.
63.5 133.4 75.9 165.1 179.3 225.6 65.5 31.8 16 28.4 83.3 50.8 4.3 79.2 7.7
QMPL11J204S 2 1 ⁄ 4 in. 22211 5⁄8
2.50 5.25 2.99 6.50 7.06 8.88 2.58 1.25 1.12 3.28 2.00 0.17 3.12 17
QMPL11J055S 55 mm
QMPL13J060S 60 mm
QMPL13J207S 2 7 ⁄ 16 in. 69.9 147.3 91.9 173.0 189.0 235.0 73.7 35.1 16 31.5 90.9 54.1 5.3 85.6 10.0
22213 5⁄8
QMPL13J208S 2 1 ⁄ 2 in. 2.75 5.80 3.62 6.81 7.44 9.25 2.90 1.38 1.24 3.58 2.13 0.21 3.37 22
QMPL13J065S 65 mm
QMPL15J211S 2 11 ⁄ 16 in.
QMPL15J212S 2 3 ⁄ 4 in.
QMPL15J070S 70 mm 82.6 167.4 101.9 195.6 213.4 265.2 76.2 35.1 20 31.8 98.3 60.2 6.4 91.9 12.7
22215 3⁄4
QMPL15J215S 2 15 ⁄ 16 in. 3.25 6.59 4.01 7.70 8.40 10.44 3.00 1.38 1.25 3.87 2.37 0.25 3.62 28
QMPL15J300S 3 in.
QMPL15J075S 75 mm
QMPL18J303S 3 3 ⁄ 16 in.
QMPL18J304S 3 1 ⁄ 4 in.
QMPL18J080S 80 mm
95.3 195.3 120.9 235.0 273.1 330.2 86.6 47.8 24 36.6 109.2 65.8 7.1 102.4 20.4
QMPL18J085S 85 mm 22218 7⁄8
3.75 7.69 4.76 9.25 10.75 13.00 3.41 1.88 1.44 4.30 2.59 0.28 4.03 45
QMPL18J307S 3 7 ⁄ 16 in.
QMPL18J308S 3 1 ⁄ 2 in.
QMPL18J090S 90 mm
QMPL20J311S 3 11 ⁄ 16 in.
QMPL20J312S 3 3 ⁄ 4 in.
108.0 212.9 152.4 255.0 320.0 362.0 94.7 53.8 24 41.4 122.9 75.2 6.1 116.6 26.8
QMPL20J315S 3 15 ⁄ 16 in. 22220
4.25 8.38 6.00 10.04 12.60 14.25 3.73 2.12 1 1.63 4.84 2.96 0.24 4.59 59
QMPL20J400S 4 in.
QMPL20J100S 100 mm

EC Series • QMPF Four-Bolt Pillow Blocks
QMPF Four-Bolt
Pillow Blocks

A B C D min. D max. E F G H J K L M R S Wt.
Part No. Dia. No.
in. in. in. in. in. in. in. in. in. in. in.. in. in. in. in. in. lbs.
QMPF13J060S 60 mm
QMPF13J207S 2 7 ⁄ 16 in. 69.9 147.3 91.9 174.8 193.8 44.5 235.0 76.2 24.9 16 31.5 92.2 54.1 5.3 85.6 9.1
22213 5⁄8
QMPF13J208S 2 1 ⁄ 2 in. 2.75 5.80 3.62 6.88 7.63 1.75 9.25 3.00 0.98 1.24 3.63 2.13 0.21 3.37 20
QMPF13J065S 65 mm
QMPF15J211S 2 11 ⁄ 16 in.
QMPF15J212S 2 3 ⁄ 4 in.
QMPF15J070S 70 mm 82.6 167.6 101.9 193.0 231.1 47.8 265.2 79.5 32.8 16 31.8 99.8 60.2 6.1 91.9 12.2
22215 5⁄8
QMPF15J215S 2 15 ⁄ 16 in. 3.25 6.60 4.01 7.60 9.10 1.88 10.44 3.13 1.29 1.25 3.93 2.37 0.24 3.62 27
QMPF15J300S 3 in.
QMPF15J075S 75 mm
QMPF18J303S 3 3 ⁄ 16 in.
QMPF18J304S 3 1 ⁄ 4 in.
QMPF18J080S 80 mm
95.3 195.3 120.9 225.6 276.4 50.8 312.4 95.3 39.6 20 36.6 113.3 65.8 8.1 102.4 22.2
QMPF18J085S 85 mm 22218 3⁄4
3.75 7.69 4.76 8.88 10.88 2.00 12.30 3.75 1.56 1.44 4.46 2.59 0.32 4.03 49
QMPF18J307S 3 7 ⁄ 16 in.
QMPF18J308S 3 1 ⁄ 2 in.
QMPF18J090S 90 mm
QMPF20J311S 3 11 ⁄ 16 in.
QMPF20J312S 3 3 ⁄ 4 in.
108.0 223.0 152.4 276.4 339.9 57.2 378.0 109.5 35.6 20 41.4 130.3 75.2 9.1 116.6 30.4
QMPF20J315S 3 15 ⁄ 16 in. 22220 3⁄4
4.25 8.78 6.00 10.88 13.38 2.25 14.88 4.31 1.40 1.63 5.13 2.96 0.36 4.59 67
QMPF20J400S 4 in.
QMPF20J100S 100 mm
QMPF22J110S 110 mm
QMPF22J407S 4 7 ⁄ 16 in. 120.7 233.4 160.0 301.8 368.3 63.5 409.7 120.7 40.1 20 46.5 154.4 94.0 4.3 140.5 37.2
22222 3⁄4
QMPF22J408S 4 1 ⁄ 2 in. 4.75 9.19 6.30 11.88 14.50 2.50 16.13 4.75 1.58 1.83 6.08 3.70 0.17 5.53 82
QMPF22J115S 115 mm
QMPF26J125S 125 mm
QMPF26J415S 4 15 ⁄ 16 in. 139.7 279.7 175.0 349.3 403.4 69.9 444.5 128.0 39.1 24 58.7 158.8 94.7 -0.8 153.4 60.8
22226 7⁄8
QMPF26J500S 5 in. 5.50 11.01 6.89 13.75 15.88 2.75 17.5 5.04 1.54 2.31 6.25 3.73 -0.03 6.04 134
QMPF26J130S 130 mm
QMPF30J507S 5 7 ⁄ 16 in.
QMPF30J508S 5 1 ⁄ 2 in.
QMPF30J140S 140 mm 169.9 330.2 205.0 441.5 485.9 95.3 558.8 171.5 76.2 24 75.9 201.7 116.1 6.6 192.0 113.4
23230
QMPF30J515S 5 15 ⁄ 16 in. 6.69 13.00 8.07 17.38 19.13 3.75 22.00 6.75 3.00 1 2.99 7.94 4.57 0.26 7.56 250
QMPF30J600S 6 in.
QMPF30J150S 150 mm
QMPF34J607S 6 7 ⁄ 16 in.
QMPF34J608S 6 1 ⁄ 2 in.
QMPF34J170S 170 mm 190.5 390.7 235.0 530.4 600.2 117.5 660.4 190.5 63.5 24 85.1 224.3 129.0 5.6 214.1 170.1
23234
QMPF34J615S 6 15 ⁄ 16 in. 7.50 15.38 9.25 20.88 23.63 4.625 26.00 7.50 2.50 1 3.35 8.83 5.08 0.22 8.43 375
QMPF34J700S 7 in.
QMPF34J180S 180 mm

EC Series • QMPR Four-Bolt Pillow Blocks
QMPR Four-Bolt Pillow Blocks

Part No. Dia. No.
QMPR13J060S 60 mm
QMPR13J207S 2 7 ⁄ 16 in. 69.9 147.3 91.9 181.1 222.3 47.8 260.4 82.6 24.9 16 31.5 95.5 54.1 5.3 85.6 9.1
22213 5⁄8
QMPR13J208S 2 1 ⁄ 2 in. 2.75 5.80 3.62 7.13 8.75 1.88 10.25 3.25 0.98 1.24 3.76 2.13 0.21 3.37 20
QMPR13J065S 65 mm
QMPR15J211S 2 11 ⁄ 16 in.
QMPR15J212S 2 3 ⁄ 4 in.
QMPR15J070S 70 mm 79.5 164.3 101.9 203.2 243.8 54.1 275.1 85.9 29.5 16 31.8 103.1 60.2 6.1 91.9 12.2
22215 5⁄8
QMPR15J215S 2 15 ⁄ 16 in. 3.13 6.47 4.01 8.00 9.60 2.13 10.83 3.38 1.16 1.25 4.06 2.37 0.24 3.62 27
QMPR15J300S 3 in.
QMPR15J075S 75 mm
QMPR18J303S 3 3 ⁄ 16 in.
QMPR18J304S 3 1 ⁄ 4 in.
QMPR18J080S 80 mm
95.3 195.3 120.9 235.0 285.8 60.5 346.2 95.3 39.6 20 36.6 113.3 65.8 8.1 102.4 22.2
QMPR18J085S 85 mm 22218 3⁄4
3.75 7.69 4.76 9.25 11.25 2.38 13.63 3.75 1.56 1.44 4.46 2.59 0.32 4.03 49
QMPR18J307S 3 7 ⁄ 16 in.
QMPR18J308S 3 1 ⁄ 2 in.
QMPR18J090S 90 mm

EC Series • QMPH/QMPG Four-Bolt Pillow Blocks
QMPH/QMPG Four-Bolt
Pillow Blocks
QMPH SAF Style Four-Bolt Pillow Block Dimensions

Part No. Dia. No.
QMPH26J125S 125 mm
QMPH26J415S 4 15 ⁄ 16 in. 152.4 284 175 406.4 435.1 85.9 500.4 128 51.8 24 58.7 158.5 94.5 -0.7 153.4 60.8
22226
QMPH26J500S 5 in. 6.00 11.18 6.89 16.00 17.13 3.38 19.70 5.04 2.04 1 2.31 6.24 3.72 -0.028 6.04 134
QMPH26J130S 130 mm
QMPH30J507S 5 7 ⁄ 16 in.
169.9 330.7 205.0 441.5 485.9 95.3 558.8 171.5 76.2 24 75.9 199.1 116.1 5.1 192.0 113.4
QMPH30J508S 5 1 ⁄ 2 in. 23230
6.688 13.02 8.07 17.38 19.13 3.75 22.00 6.75 3.00 1 2.99 7.84 4.57 0.20 7.56 250
QMPH30J140S 140 mm
QMPH30J515S 5 15 ⁄ 16 in.
179.4 339.9 205.0 492.3 549.4 108.0 628.7 171.5 85.9 24 75.9 201.7 116.1 6.6 192.0 113.4
QMPH30J600S 6 in. 23230
7.063 13.38 8.07 19.38 21.63 4.25 24.75 6.75 3.38 1 2.99 7.94 4.57 0.26 7.56 250
QMPH30J150S 150 mm
QMPH34J607S 6 7 ⁄ 16 in.
190.5 390.7 235.0 530.4 600.2 117.5 711.2 190.5 63.5 24 85.1 224.3 129.0 5.6 214.1 170.1
QMPH34J608S 6 1 ⁄ 2 in. 23234
7.50 15.38 9.25 20.88 23.63 4.625 28.00 7.50 2.50 1 3.35 8.83 5.08 0.22 8.43 375
QMPH34J170S 170 mm
QMPH34J615S 6 15 ⁄ 16 in.
200.0 400.1 235.0 549.4 619.3 114.3 711.2 190.5 73.2 30 85.1 224.3 129.0 5.6 214.1 170.1
QMPH34J700S 7 in. 23234
7.875 15.75 9.25 21.63 24.38 4.50 28.00 7.50 2.88 1 1⁄4 3.35 8.83 5.08 0.22 8.43 375
QMPH34J180S 180 mm
QMPG SN Style Four-Bolt Pillow Block Dimensions

Part No. Dia. No.
QMPG26J125S 125 mm
QMPG26J415S 4 15 ⁄ 16 in. 150.0 281.4 175.0 384.3 447.8 80.0 500.1 128 49.3 24 58.7 158.5 94.5 -6.9 153.4 60.8
22226
QMPG26J500S 5 in. 5.906 11.08 6.89 15.13 17.63 3.15 19.69 5.04 1.94 1 2.31 6.24 3.72 -0.27 6.04 134
QMPG26J130S 130 mm
QMPG30J507S 5 7 ⁄ 16 in.
QMPG30J508S 5 1 ⁄ 2 in.
QMPG30J140S 140 mm 170.0 332.2 205.0 438.2 482.6 89.9 547.6 171.5 76.2 24 75.9 198.6 116.1 9.7 192.0 113.4
23230
QMPG30J515S 5 15 ⁄ 16 in. 6.693 13.08 8.07 17.25 19.00 3.54 21.65 6.75 3.00 1 2.99 7.82 4.57 0.38 7.56 250
QMPG30J600S 6 in.
QMPG30J150S 150 mm
QMPG34J607S 6 7 ⁄ 16 in.
190.5 390.7 235.0 530.4 600.2 117.5 711.2 190.5 63.5 24 85.1 224.3 129.0 5.6 214.1 170.1
QMPG34J608S 6 1 ⁄ 2 in. 23234
7.50 15.38 9.25 20.88 23.63 4.625 28.00 7.50 2.50 1 3.35 8.83 5.08 0.22 8.43 375
QMPG34J170S 170 mm
QMPG34J615S 6 15 ⁄ 16 in.
200.0 400.1 235.0 549.4 619.3 114.3 711.2 190.5 73.2 30 85.1 224.3 129.0 5.6 214.1 170.1
QMPG34J700S 7 in. 23234
7.875 15.75 9.25 21.63 24.38 4.50 28.00 7.50 2.88 1 1⁄4 3.35 8.83 5.08 0.22 8.43 375
QMPG34J180S 180 mm

EC Series • QMPX 5000 SERIES Four-Bolt Pillow Blocks
QMPX 5000 SERIES

Four-Bolt Pillow
Blocks

Part No. Dia. No.
QMPX13J060S 60 mm
QMPX13J207S 2 7 ⁄ 16 in. 76.2 153.7 91.9 176.3 242.8 66.8 285.8 98.6 31.0 16 31.5 103.4 54.1 5.3 85.6 10.4
22213 5⁄8
QMPX13J208S 2 1 ⁄ 2 in. 3.00 6.05 3.62 6.94 9.56 2.63 11.25 3.88 1.22 1.24 4.07 2.13 0.21 3.37 23
QMPX13J065S 65 mm
QMPX15J211S 2 11 ⁄ 16 in.
QMPX15J212S 2 3 ⁄ 4 in.
QMPX15J070S 70 mm 88.9 173.5 101.9 230.1 265.2 68.9 330.2 108.0 39.1 20 31.8 114.3 60.2 7.1 91.9 12.7
22215 3⁄4
QMPX15J215S 2 15 ⁄ 16 in. 3.50 6.83 4.01 9.06 10.44 2.75 13.00 4.25 1.54 1.25 4.50 2.37 0.28 3.62 28
QMPX15J300S 3 in.
QMPX15J075S 75 mm
QMPX18J303S 3 3 ⁄ 16 in.
QMPX18J304S 3 1 ⁄ 4 in.
QMPX18J080S 80 mm
101.6 201.2 120.9 274.6 309.6 76.2 381.0 120.7 38.1 20 36.6 126.0 65.8 8.1 102.4 22.2
QMPX18J085S 85 mm 22218 3⁄4
4.00 7.92 4.76 10.81 12.19 3.00 15.00 4.75 1.50 1.44 4.96 2.59 0.32 4.03 49
QMPX18J307S 3 7 ⁄ 16 in.
QMPX18J308S 3 1 ⁄ 2 in.
QMPX18J090S 90 mm
QMPX20J311S 3 11 ⁄ 16 in.
QMPX20J312S 3 3 ⁄ 4 in.
127.0 239.8 152.4 317.5 355.6 88.9 425.5 139.7 41.4 24 41.4 145.3 75.2 8.6 116.6 30.4
QMPX20J315S 3 15 ⁄ 16 in. 22220 7⁄8
5.00 9.44 6.00 12.50 14.00 3.50 16.75 5.50 1.63 1.63 5.72 2.96 0.34 4.59 67
QMPX20J400S 4 in.
QMPX20J100S 100 mm
QMPX22J110S 110 mm
QMPX22J407S 4 7 ⁄ 16 in. 146.1 273.8 160.0 354.1 395.2 101.6 469.9 158.8 45.7 24 46.5 171.2 94.0 2.3 140.5 37.2
22222
QMPX22J408S 4 1 ⁄ 2 in. 5.75 10.78 6.30 13.94 15.56 4.00 18.50 6.25 1.80 1 1.83 6.74 3.70 0.09 5.53 82
QMPX22J115S 115 mm
QMPX26J125S 125 mm
QMPX26J415S 4 15 ⁄ 16 in. 155.6 283.2 175.0 387.4 425.5 108.0 514.4 171.5 50.8 24 58.7 180.3 94.5 -1.5 153.4 60.8
22226
QMPX26J500S 5 in. 6.125 11.15 6.89 15.25 16.75 4.25 20.25 6.75 2.00 1 1⁄8 2.31 7.10 3.72 -0.06 6.04 134
QMPX26J130S 130 mm
QMPX30J507S 5 7 ⁄ 16 in.
169.9 330.2 205.0 439.9 485.8 93.5 558.8 171.5 76.2 24 75.9 201.7 116.1 6.6 192.0 113.4
QMPX30J508S 5 1 ⁄ 2 in. 23230
6.688 13.00 8.07 17.32 19.125 3.68 22.00 6.75 3.00 1 1⁄8 2.99 7.94 4.57 0.26 7.56 250
QMPX30J140S 140 mm
QMPX30J515S(1) 5 15 ⁄ 16 in.
179.4 339.9 205.0 489.0 552.5 106.4 625.7 171.5 85.6 24 75.9 196.9 116.1 4.8 192.0 113.4
QMPX30J600S(1) 6 in. 23230
7.063 13.38 8.07 19.25 21.75 4.188 24.75 6.75 3.37 1 1⁄8 2.99 7.75 4.57 0.19 7.56 250
QMPX30J150S(1) 150 mm
QMPX34J607S(1) 6 7 ⁄ 16 in.
QMPX34J608S(1) 6 1 ⁄ 2 in.
QMPX34J170S(1) 170 mm 200.0 400.1 235.0 549.4 619.3 112.8 711.2 190.5 73.2 30 80.1 224.3 129.0 5.6 214.1 179.2
23234
QMPX34J615S(1) 6 15 ⁄ 16 in. 7.875 15.75 9.25 21.63 24.38 4.44 28.00 7.50 2.88 1 1⁄4 3.35 8.83 5.08 0.22 8.43 395
QMPX34J700S(1) 7 in.
QMPX34J180S(1) 180 mm
No gussets on outside housing.
(1)

EC Series • QMPXT 5000 SERIES Two-Bolt Pillow Blocks
QMPXT 5000 SERIES Two-Bolt Pillow Blocks

Part No. Dia. No.
QMPXT13J060S 60 mm
QMPXT13J207S 2 7 ⁄ 16 in. 76.2 153.7 91.9 194.6 223.0 285.8 73.7 35.1 20 31.5 91.4 54.1 5.3 85.6 10.0
22213 3⁄4
QMPXT13J208S 2 1 ⁄ 2 in. 3.00 6.05 3.62 7.66 8.78 11.25 2.90 1.38 1.24 3.60 2.13 0.21 3.37 22
QMPXT13J065S 65 mm
QMPXT15J211S 2 11 ⁄ 16 in.
QMPXT15J212S 2 3 ⁄ 4 in.
QMPXT15J070S 70 mm 88.9 173.7 101.9 230.1 265.2 330.2 75.7 35.1 24 31.8 98.0 60.2 6.1 91.9 12.7
22215 7⁄8
QMPXT15J215S 2 15 ⁄ 16 in. 3.50 6.84 4.01 9.06 10.44 13.00 2.98 1.38 1.25 3.86 2.37 0.24 3.62 28
QMPXT15J300S 3 in.
QMPXT15J075S 75 mm

EC Series • QMSN SN-STYLE Two-Bolt Pillow Blocks – Pure Metric Design
QMSN SN-STYLE Two-Bolt Pillow Blocks – Pure Metric Design

Part No. Dia. No.
QMSN08J035S 35 mm
60 111 60.5 159 175 205 62 35 12 25 75 44 5 70 10.5
QMSN08J107S 1 7 ⁄ 16 in. 22208 1⁄2
2.36 4.37 2.38 6.26 6.89 8.07 2.44 1.38 1.00 2.95 1.75 0.20 2.75 23
QMSN08J108S 1 1 ⁄ 2 in.
QMSN09J040S 40 mm
QMSN09J111S 1 11 ⁄ 16 in. 60 111 67 159 175 205 62 35 12 25 79 48 6 73 10.5
22209 1⁄2
QMSN09J112S 1 3 ⁄ 4 in. 2.36 4.37 2.64 6.26 6.89 8.07 2.44 1.38 0.98 3.11 1.89 0.24 2.87 23
QMSN09J045S 45 mm
QMSN10J115S 1 15 ⁄ 16 in.
70 136 70 183 216 254 68 25 16 25 82 48 9 73 12.7
QMSN10J200S 2 in. 22210 5⁄8
2.76 5.35 2.76 7.20 8.50 10.00 2.68 0.98 0.98 3.23 1.89 0.35 2.87 28
QMSN10J050S 50 mm
QMSN11J203S 2 3 ⁄ 16 in.
70 141 76 183 216 254 68 25 16 29 85 51 6 80 13.2
QMSN11J204S 2 1 ⁄ 4 in. 22211 5⁄8
2.76 5.55 2.99 7.20 8.50 10.00 2.68 0.98 1.14 3.35 2.01 0.24 3.15 29
QMSN11J055S 55 mm
QMSN13J060S 60 mm
QMSN13J207S 2 7 ⁄ 16 in. 80 157 92 196 235 275 74 35 16 31 91 55 5 86 15.9
22213 5⁄8
QMSN13J208S 2 1 ⁄ 2 in. 3.15 6.18 3.62 7.72 9.25 10.83 2.91 1.38 1.22 3.58 2.17 0.20 3.39 35
QMSN13J065S 65 mm
QMSN15J211S 2 11 ⁄ 16 in.
QMSN15J212S 2 3 ⁄ 4 in.
QMSN15J070S 70 mm 95 183 102 241 279 316 76 34 20 32 98 60 6 92 20.9
22215 3⁄4
QMSN15J215S 2 15 ⁄ 16 in. 3.74 7.20 4.02 9.49 10.98 12.44 2.99 1.34 1.26 3.86 2.36 0.24 3.62 46
QMSN15J300S 3 in.
QMSN15J075S 75 mm
QMSN18J303S 3 3 ⁄ 16 in.
100 200 121 279 292 345 86 39 20 37 109 66 7 103 25.5
QMSN18J304S 3 1 ⁄ 4 in. 22218 3⁄4
3.94 7.87 4.76 10.98 11.50 13.58 3.39 1.54 1.46 4.29 2.60 0.28 4.06 56
QMSN18J080S 80 mm

EC Series • QMSN SN-STYLE Two-Bolt Pillow Blocks – Pure Metric Design

Part No. Dia. No.
112 212 121 279 292 345 86 39 20 37 109 66 7 103 25.5
QMSN18J085S 85 mm 22218 3⁄4
4.41 8.35 4.76 10.98 11.50 13.58 3.39 1.54 1.46 4.29 2.60 0.28 4.06 56
QMSN18J307S 3 7 ⁄ 16 in.
112 212 121 290 327 380 86 39 24 37 109 66 7 103 25.5
QMSN18J308S 3 1 ⁄ 2 in. 22218 7 ⁄8
4.41 8.35 4.76 11.42 12.87 14.96 3.39 1.54 1.46 4.29 2.60 0.28 4.06 56
QMSN18J090S 90 mm
QMSN20J311S 3 11 ⁄ 16 in.
QMSN20J312S 3 3 ⁄ 4 in.
125 241 152 319 366 410 101 50 24 41 126 75 9 116 35.9
QMSN20J315S 3 15 ⁄ 16 in. 22220 7 ⁄8
4.92 9.49 5.98 12.56 14.41 16.14 3.98 1.97 1.61 4.96 2.95 0.35 4.57 79
QMSN20J400S 4 in.
QMSN20J100S 100 mm
140 255 160 332 365 410 105 39 24 47 147 94 6 141 35.9
QMSN22J110S 110 mm 22222 7 ⁄8
5.51 10.04 6.30 13.07 14.37 16.14 4.13 1.54 1.85 5.79 3.70 0.24 5.55 79
QMSN22J407S 4 7 ⁄ 16 in.
150 265 160 367 400 445 105 49 24 47 147 94 6 141 35.5
QMSN22J408S 4 1 ⁄ 2 in. 22222 7 ⁄8
5.91 10.43 6.30 14.45 15.75 17.52 4.13 1.93 1.85 5.79 3.70 0.24 5.55 78
QMSN22J115S 115 mm
QMSN26J125S 125 mm
QMSN26J415S 4 15 ⁄ 16 in. 150 282 175 402 435 500 113 49 30 58 151 95 2 153 40.0
22226
QMSN26J500S 5 in. 5.91 11.10 6.89 15.83 17.13 19.69 4.45 1.93 1 1⁄4 2.28 5.94 3.74 0.08 6.02 88
QMSN26J130S 130 mm

EC Series • QMC Piloted Flange Cartridges
QMC Piloted Flange Cartridges

B.C. C D E F G(1) H J K M N R S Wt.
Part No. Dia. No. FIX EXP FIX EXP
QMC08J035S 35 mm
49.8 51.8 111.3 60.5 92.2 78.5 133.4 92.1 12.7 10 25.4 73.7 75.7 44.5 23.9 3.81 69.9 3.6
QMC08J107S 1 7 ⁄ 16 in. 22208 7 ⁄ 16
1.96 2.04 4.38 2.38 3.63 3.09 5.25 3.625 0.50 1.00 2.90 2.98 1.75 0.94 0.15 2.75 8
QMC08J108S 1 1 ⁄ 2 in.
QMC09J040S 40 mm
QMC09J111S 1 11 ⁄ 16 in. 54.6 56.6 130.3 66.8 111.3 91.9 155.7 108.0 12.7 10 25.4 77.0 79.0 47.5 22.4 3.81 72.9 4.1
22209 7 ⁄ 16
QMC09J112S 1 3 ⁄ 4 in. 2.15 2.23 5.13 2.63 4.38 3.62 6.13 4.250 0.50 1.00 3.03 3.11 1.87 0.88 0.15 2.87 9
QMC09J045S 45 mm
QMC10J115S 1 15 ⁄ 16 in.
50.4 52.6 136.7 70.1 113.5 96.5 162.1 114.3 16.0 10 25.4 77.5 79.5 47.5 26.9 4.6 72.9 4.5
QMC10J200S 2 in. 22210 7 ⁄ 16
1.99 2.07 5.38 2.76 4.47 3.80 6.38 4.500 0.63 1.00 3.05 3.13 1.87 1.06 0.18 2.87 10
QMC10J050S 50 mm
QMC11J203S 2 3 ⁄ 16 in.
54.4 56.4 152.4 75.9 127.0 107.7 185.4 127.0 14.7 12 28.7 83.1 85.1 50.5 28.7 3.6 79.2 5.9
QMC11J204S 2 1 ⁄ 4 in. 22211 1⁄2
2.14 2.22 6.00 2.99 5.00 4.24 7.30 5.000 0.58 1.13 3.27 3.35 1.99 1.13 0.14 3.12 13
QMC11J055S 55 mm
QMC13J060S 60 mm
QMC13J207S 2 7 ⁄ 16 in. 59.4 61.5 165.1 91.9 139.7 116.8 193.8 139.7 17.5 12 31.5 87.9 91.2 54.1 28.7 2.3 85.6 7.3
22213 1⁄2
QMC13J208S 2 1 ⁄ 2 in. 2.34 2.42 6.50 3.62 5.50 4.60 7.63 5.500 0.69 1.24 3.46 3.59 2.13 1.13 0.09 3.37 16
QMC13J065S 65 mm
QMC15J211S 2 11 ⁄ 16 in.
QMC15J212S 2 3 ⁄ 4 in.
QMC15J070S 70 mm 62.5 64.5 190.5 101.9 162.1 134.6 222.3 161.9 20.6 16 31.8 94.5 96.5 60.2 31.8 2.3 91.9 10.0
22215 5⁄8
QMC15J215S 2 15 ⁄ 16 in. 2.46 2.54 7.50 4.01 6.38 5.30 8.75 6.375 0.81 1.25 3.72 3.80 2.37 1.25 0.09 3.62 22
QMC15J300S 3 in.
QMC15J075S 75 mm
QMC18J303S 3 3 ⁄ 16 in.
QMC18J304S 3 1 ⁄ 4 in.
QMC18J080S 80 mm
73.2 75.2 219.2 120.9 187.5 154.9 262.6 187.3 25.4 20 36.6 106.4 108.5 65.8 33.3 4.1 102.4 14.5
QMC18J085S 85 mm 22218 3⁄4
2.88 2.96 8.63 4.76 7.38 6.10 10.34 7.375 1.00 1.44 4.19 4.27 2.59 1.31 0.16 4.03 32
QMC18J307S 3 7 ⁄ 16 in.
QMC18J308S 3 1 ⁄ 2 in.
QMC18J090S 90 mm
QMC20J311S 3 11 ⁄ 16 in.
QMC20J312S 3 3 ⁄ 4 in.
72.1 74.2 238.3 152.4 206.5 168.4 276.4 206.4 25.4 20 41.4 126.0 128.0 75.2 54.1 9.4 115.8 19.5
QMC20J315S 3 15 ⁄ 16 in. 22220 3⁄4
2.84 2.92 9.38 6.00 8.13 6.63 10.88 8.125 1.00 1.63 4.96 5.04 2.96 2.13 0.37 4.56 43
QMC20J400S 4 in.
QMC20J100S 100 mm
QMC22J110S(2) 110 mm
QMC22J407S(2) 4 7 ⁄ 16 in. 92.5 94.5 298.5 160.0 254.0 149.4 342.9 260.4 25.4 20 46.5 140.7 142.7 94.0 48.3 0.3 140.5 32.7
22222 3 ⁄ 4 (2)
QMC22J408S(2) 4 1 ⁄ 2 in. 3.64 3.72 11.75(2) 6.30 10.00 5.88(2) 13.50 10.250 1.00 1.83 5.54 5.62 3.70 1.90 0.01 5.53 72
QMC22J115S(2) 115 mm
(1)
Six-bolt housing.
(2)

EC Series • QMCW Piloted Flange Cartridges
QMCW Piloted Flange Cartridges

Part No. Dia. No. FIX Exp FIX EXP
QMCW08J035S 35 mm
38.6 40.9 111.3 59.9 92.2 78.5 133.4 92.1 12.7 10 25.4 73.7 75.7 44.5 35.1 3.8 69.9 3.6
QMCW08J107S 1 7 ⁄ 16 in. 22208 7 ⁄ 16
1.53 1.61 4.38 2.36 3.63 3.09 5.25 3.625 0.50 1.00 2.90 2.98 1.75 1.38 0.15 2.75 8
QMCW08J108S 1 1 ⁄ 2 in.
QMCW09J040S 40 mm
QMCW09J111S 1 11 ⁄ 16 in. 38.9 40.1 130.3 66.8 111.3 91.9 155.7 108.0 10.2 10 25.1 77.0 78.2 47.8 38.1 4.1 72.9 4.1
22209 7 ⁄ 16
QMCW09J112S 1 3 ⁄ 4 in. 1.53 1.58 5.13 2.63 4.38 3.62 6.13 4.250 0.40 0.99 3.03 3.08 1.88 1.50 0.16 2.87 9
QMCW09J045S 45 mm
QMCW10J115S 1 15 ⁄ 16 in.
39.1 41.1 136.7 70.1 113.5 96.5 162.1 114.3 9.7 10 24.9 77.2 79.2 48.0 38.1 4.3 72.9 4.5
QMCW10J200S 2 in. 22210 7 ⁄ 16
1.54 1.62 5.38 2.76 4.47 3.80 6.38 4.500 0.38 0.98 3.04 3.12 1.89 1.50 0.17 2.87 10
QMCW10J050S 50 mm
QMCW11J203S 2 3 ⁄ 16 in.
45.7 47.8 152.4 75.9 127.0 107.7 181.1 127.0 14.2 12 28.7 86.9 88.9 50.5 41.4 7.62 79.2 5.9
QMCW11J204S 2 1 ⁄ 4 in. 22211 1⁄2
1.80 1.88 6.00 2.99 5.00 4.24 7.13 5.000 0.56 1.13 3.42 3.50 1.99 1.63 0.30 3.12 13
QMCW11J055S 55 mm
QMCW13J060S 60 mm
QMCW13J207S 2 7 ⁄ 16 in. 47.5 49.5 165.1 91.9 139.7 116.8 193.8 139.7 12.7 12 31.5 90.2 92.2 54.1 42.9 4.31 85.6 7.3
22213 1⁄2
QMCW13J208S 2 1 ⁄ 2 in. 1.87 1.95 6.50 3.62 5.50 4.60 7.63 5.500 0.50 1.24 3.55 3.63 2.13 1.69 0.17 3.37 16
QMCW13J065S 65 mm
QMCW15J211S 2 11 ⁄ 16 in.
QMCW15J212S 2 3 ⁄ 4 in.
QMCW15J070S 70 mm 46.0 48.0 190.5 101.9 162.1 134.6 222.3 161.9 12.7 16 31.8 93.5 95.5 60.2 47.8 1.5 91.9 10.0
22215 5⁄8
QMCW15J215S 2 15 ⁄ 16 in. 1.81 1.89 7.50 4.01 6.38 5.30 8.75 6.375 0.50 1.25 3.68 3.76 2.37 1.88 0.06 3.62 22
QMCW15J300S 3 in.
QMCW15J075S 75 mm
QMCW18J303S 3 3 ⁄ 16 in.
QMCW18J304S 3 1 ⁄ 4 in.
QMCW18J080S 80 mm
62.5 64.5 219.2 120.9 187.5 154.9 260.4 187.3 22.4 20 36.6 110.2 112.3 65.8 47.8 7.9 102.4 14.5
QMCW18J085S 85 mm 22218 3⁄4
2.46 2.54 8.63 4.76 7.38 6.10 10.25 7.375 0.88 1.44 4.34 4.42 2.59 1.88 0.31 4.03 32
QMCW18J307S 3 7 ⁄ 16 in.
QMCW18J308S 3 1 ⁄ 2 in.
QMCW18J090S 90 mm
(1)
Six-bolt housing.
(2)

EC Series • QMCW Piloted Flange Cartridges
QMCW Piloted Flange Cartridges – continued

Part No. Dia. No. FIX Exp FIX EXP
QMCW20J311S 3 11 ⁄ 16 in.
QMCW20J312S 3 3 ⁄ 4 in.
63.5 65.5 238.3 152.4 206.5 168.4 276.4 206.4 25.4 20 41.4 120.7 122.7 75.2 57.2 4.1 116.6 19.5
QMCW20J315S 3 15 ⁄ 16 in. 22220 3⁄4
2.50 2.58 9.38 6.00 8.13 6.63 10.88 8.125 1.00 1.63 4.75 4.83 2.96 2.25 0.16 4.59 43
QMCW20J400S 4 in.
QMCW20J100S 100 mm
QMCW22J110S(2) 110 mm
QMCW22J407S(2) 4 7 ⁄ 16 in. 76.5 78.5 298.5 160.0 254.0 149.4 342.9 260.4 25.4 20 46.5 144.8 146.8 94.0 68.3 4.3 140.5 32.7
22222 3 ⁄ 4 (2)
QMCW22J408S(2) 4 1 ⁄ 2 in. 3.01 3.09 11.75(2) 6.30 10.00 5.88(2) 13.50 10.250 1.00 1.83 5.70 5.78 3.70 2.69 0.17 5.53 72
QMCW22J115S(2) 115 mm
QMCW26J125S(2) 125 mm
QMCW26J415S(2) 4 15 ⁄ 16 in. 73.7 75.7 323.9 175.0 266.7 162.1 374.7 279.4 26.2 24 58.7 151.4 153.4 94.7 77.9 -1.8 153.4 46.3
22226 7 ⁄ 8 (2)
QMCW26J500S(2) 5 in. 2.90 2.98 12.75(2) 6.89 10.50 6.38(2) 14.75 11.000 1.03 2.31 5.96 6.04 3.73 3.065 -0.07 6.04 102
QMCW26J130S(2) 130 mm
QMCW30J507S(2) 5 7 ⁄ 16 in.
82.8 84.8 368.3 205.0 304.8 184.2 431.8 330.2 26.2 24 75.9 204.2 206.2 116.1 121.4 12.2 192.0 102.5
QMCW30J508S(2) 5 1 ⁄ 2 in. 23230 7 ⁄ 8 (2)
3.26 3.34 14.50(2) 8.07 12.00 7.25(2) 17.00 13.000 1.03 2.99 8.04 8.12 4.57 4.78 0.48 7.56 226
QMCW30J140S(2) 140 mm
QMCW30J515S(2) 5 15 ⁄ 16 in.
82.8 84.8 419.1 205.0 304.8 209.6 482.6 355.6 26.2 24 75.9 211.3 213.4 116.1 128.5 19.3 192.0 101.6
QMCW30J600S(2) 6 in. 23230 7 ⁄ 8 (2)
3.26 3.34 16.50(2) 8.07 12.00 8.25(2) 19.00 14.000 1.03 2.99 8.32 8.40 4.57 5.06 0.76 7.56 224
QMCW30J150S(2) 150 mm
QMCW34J607S(2) 6 7 ⁄ 16 in.
QMCW34J608S(2) 6 1 ⁄ 2 in.
QMCW34J170S(2) 170 mm 85.9 87.9 431.8 235.0 355.6 215.9 482.6 381.0 28.7 24 85.1 216.2 218.2 129.0 130.3 2.0 214.1 152.4
23234
QMCW34J615S(2) 6 15 ⁄ 16 in. 3.38 3.46 17.00 9.25 14.00 8.50 19.00 15.000 1.13 1(2) 3.35 8.51 8.59 5.08 5.13 0.08 8.43 336
QMCW34J700S(2) 7 in.
QMCW34J180S(2) 180 mm
(1)
Six-bolt housing.
(2)

EC Series • QMF Four-Bolt Square Flange Blocks
QMF Four-Bolt Square Flange Blocks

B.C. C D E F H J K M N R S Wt.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm lbs.
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. kg
QMF08J035S 35 mm 127.7 60.5 93.7 88.9 117.6 22.4 12 25.4 72.9 74.9 44.5 57.2 3.0 69.9 4.5
22208 1⁄2
QMF08J107S 1 7 ⁄ 16 in. 4.95 2.38 3.69 3.50 4.63 0.88 1.00 2.87 2.95 1.75 2.25 0.12 2.75 10
148.3 60.5 108.0 104.9 136.7 22.4 12 25.4 73.7 75.7 44.5 59.4 3.8 69.9 4.5
QMF08J108S 1 1 ⁄ 2 in. 22208 1⁄2
5.84 2.38 4.25 4.13 5.38 0.88 1.00 2.90 2.98 1.75 2.34 0.15 2.75 10
QMF09J111S 1 11 ⁄ 16 in. 148.3 66.8 118.4 104.9 136.7 22.4 12 25.4 79.5 81.5 47.8 63.5 6.4 73.2 5.0
22209 1⁄2
QMF09J040S 40 mm 5.84 2.63 4.66 4.13 5.38 0.88 1.00 3.13 3.21 1.88 2.50 0.25 2.88 11
QMF09J112S 1 3 ⁄ 4 in. 157.2 66.8 118.4 111.3 143.0 22.4 12 25.4 79.5 81.5 47.8 63.5 6.4 72.9 5.0
22209 1⁄2
QMF09J045S 45 mm 6.19 2.63 4.66 4.38 5.63 0.88 1.00 3.13 3.21 1.88 2.50 0.25 2.87 11
QMF10J115S 1 15 ⁄ 16 in.
157.2 70.1 120.7 111.3 139.7 22.4 12 24.4 80.8 82.8 48.0 65.0 7.9 72.9 5.0
QMF10J200S 2 in. 22210 1⁄2
6.19 2.76 4.75 4.38 5.50 0.88 0.98 3.18 3.26 1.89 2.56 0.31 2.87 11
QMF10J050S 50 mm
QMF11J203S 2 3 ⁄ 16 in.
175.0 75.9 130.3 124.0 157.2 25.4 16 28.7 82.8 84.8 50.5 66.8 3.3 79.2 6.4
QMF11J204S 2 1 ⁄ 4 in. 22211 5⁄8
6.89 2.99 5.13 4.88 6.19 1.00 1.13 3.26 3.34 1.99 2.63 0.13 3.12 14
QMF11J055S 55 mm
QMF13J060S 60 mm
QMF13J207S 2 7 ⁄ 16 in. 193.0 91.9 146.1 136.7 168.4 25.4 16 31.5 88.6 90.7 54.1 72.4 3.0 85.6 7.7
22213 5⁄8
QMF13J208S 2 1 ⁄ 2 in. 7.60 3.62 5.75 5.38 6.63 1.00 1.24 3.49 3.57 2.13 2.85 0.12 3.37 17
QMF13J065S 65 mm
QMF15J211S 2 11 ⁄ 16 in.
QMF15J212S 2 3 ⁄ 4 in.
QMF15J070S 70 mm 215.6 101.9 168.9 152.4 189.0 26.9 20 31.8 96.0 98.0 60.2 76.2 4.1 91.9 10.4
22215 3⁄4
QMF15J215S 2 15 ⁄ 16 in. 8.49 4.01 6.65 6.00 7.44 1.06 1.25 3.78 3.86 2.37 3.00 0.16 3.62 23
QMF15J300S 3 in.
QMF15J075S 75 mm
QMF18J303S 3 3 ⁄ 16 in.
QMF18J304S 3 1 ⁄ 4 in.
QMF18J080S 80 mm
251.7 120.9 193.8 177.8 219.2 33.3 20 36.6 107.2 109.2 66.8 84.1 4.8 102.4 15.9
QMF18J085S 85 mm 22218 3⁄4
9.91 4.76 7.63 7.00 8.63 1.31 1.44 4.22 4.30 2.59 3.31 0.19 4.03 35
QMF18J307S 3 7 ⁄ 16 in.
QMF18J308S 3 1 ⁄ 2 in.
QMF18J090S 90 mm
QMF20J311S 3 11 ⁄ 16 in.
QMF20J312S 3 3 ⁄ 4 in.
278.4 152.4 224.0 196.9 253.2 38.1 24 41.4 126.2 128.3 75.2 103.1 9.4 116.6 24.9
QMF20J315S 3 15 ⁄ 16 in. 22220 7⁄8
10.96 6.00 8.82 7.75 9.97 1.50 1.63 4.97 5.05 2.96 4.06 0.37 4.59 55
QMF20J400S 4 in.
QMF20J100S 100 mm
QMF22J110S 110 mm
QMF22J407S 4 7 ⁄ 16 in. 314.5 160.0 256.8 222.3 276.4 38.1 24 46.5 150.1 152.1 94.0 106.9 9.7 140.5 28.6
22222 7⁄8
QMF22J408S 4 1 ⁄ 2 in. 12.38 6.30 10.11 8.75 10.88 1.50 1.83 5.91 5.99 3.70 4.21 0.38 5.53 63
QMF22J115S 115 mm

EC Series • QMFL Four-Bolt Square Flange Blocks
QMFL Four-Bolt Square Flange Blocks

B.C. C D E F G(1) (2) (3) H J K M N R S Wt.
QMFL08J035S 35 mm
127.0 60.5 93.7 89.9 117.6 22.4 12 25.4 72.9 74.9 44.5 57.2 3.0 69.9 4.5
QMFL08J107S 1 7 ⁄ 16 in. 22208 N/A 1⁄2
5.00 2.38 3.69 3.54 4.63 0.88 1.00 2.87 2.95 1.75 2.25 0.12 2.75 10
QMFL08J108S 1 1 ⁄ 2 in.
QMFL09J111S 1 11 ⁄ 16 in.
QMFL09J040S 40 mm 139.7 66.8 118.4 98.8 136.7 22.4 12 25.1 79.5 81.5 47.8 63.5 6.6 72.9 5.0
22209 N/A 1⁄2
QMFL09J112S 1 3 ⁄ 4 in. 5.50 2.63 4.66 3.89 5.38 0.88 0.99 3.13 3.21 1.88 2.50 0.26 2.87 11
QMFL09J045S 45 mm
QMFL10J115S 1 15 ⁄ 16 in.
146.1 70.1 115.3 103.4 131.8 23.1 12 24.9 80.8 82.8 48.0 62.5 7.9 72.9 5.0
QMFL10J200S 2 in. 22210 N/A 1⁄2
5.75 2.76 4.54 4.07 5.19 0.91 0.98 3.18 3.26 1.89 2.46 0.31 2.87 11
QMFL10J050S 50 mm
QMFL11J203S 2 3 ⁄ 16 in.
162.1 76.0 130.3 114.3 149.4 19.1 16 28.7 83.3 85.3 50.5 66.8 3.8 79.2 6.4
QMFL11J204S 2 1 ⁄ 4 in. 22211 N/A 5⁄8
6.38 2.99 5.13 4.50 5.88 0.75 1.13 3.28 3.36 1.99 2.63 0.15 3.12 14
QMFL11J055S 55 mm
QMFL13J060S 60 mm
QMFL13J207S 2 7 ⁄ 16 in. 171.5 91.9 146.1 121.2 157.2 25.4 16 31.5 88.9 90.7 54.1 72.6 3.0 85.6 7.7
22213 N/A 5⁄8
QMFL13J208S 2 1 ⁄ 2 in. 6.75 3.62 5.75 4.77 6.19 1.00 1.24 3.50 3.57 2.13 2.86 0.12 3.37 17
QMFL13J065S 65 mm
QMFL15J211S 2 11 ⁄ 16 in.
QMFL15J212S 2 3 ⁄ 4 in.
QMFL15J070S 70 mm 200.2 101.9 168.4 141.2 182.6 26.9 20 31.8 95.8 97.8 60.2 74.4 3.8 91.9 10.4
22215 N/A 3⁄4
QMFL15J215S 2 15 ⁄ 16 in. 7.88 4.01 6.63 5.56 7.19 1.06 1.25 3.77 3.85 2.37 2.93 0.15 3.62 23
QMFL15J300S 3 in.
QMFL15J075S 75 mm
QMFL18J303S 3 3 ⁄ 16 in.
QMFL18J304S 3 1 ⁄ 4 in.
QMFL18J080S 80 mm
241.3 120.9 193.8 170.7 212.9 187.33 32.5 20 36.6 106.4 108.5 65.8 86.4 4.1 102.4 15.9
QMFL18J085S 85 mm 22218 3⁄4
9.50 4.76 7.63 6.72 8.38 7.375 1.28 1.44 4.19 4.27 2.59 3.40 0.16 4.03 35
QMFL18J307S 3 7 ⁄ 16 in.
QMFL18J308S 3 1 ⁄ 2 in.
QMFL18J090S 90 mm
QMFL20J311S 3 11 ⁄ 16 in.
QMFL20J312S 3 3 ⁄ 4 in.
273.1 152.4 229.6 193.0 241.3 215.90 38.1 24 41.4 132.3 134.4 75.2 104.6 15.7 116.6 24.9
QMFL20J315S 3 15 ⁄ 16 in. 22220
10.75 6.00 9.04 7.60 9.50 8.500 1.50 1 1.63 5.21 5.29 2.96 4.12 0.62 4.59 55
QMFL20J400S 4 in.
QMFL20J100S 100 mm
(1)
(2)
(3)

EC Series • QMFY Round Flange Blocks
QMFY Round Flange Blocks

QMFY08J035S(4) 35 mm
127.0 60.5 108.0 88.9 158.8 90.50 19.1 12 25.4 73.2 75.2 44.5 57.4 3.3 69.9 4.5
QMFY08J107S(4) 1 7 ⁄ 16 in. 22208 1 ⁄ 2 (4)
5.00 (4) 2.38 4.25 3.54 (4) 6.25 3.563 0.75 1.00 2.88 2.96 1.75 2.26 0.13 2.75 10
QMFY08J108S(4) 1 1 ⁄ 2 in.
QMFY09J040S 40 mm
QMFY09J111S 1 11 ⁄ 16 in. 139.7 66.8 104.9 98.8 171.5 103.20 20.6 12 25.1 76.2 78.2 47.8 60.5 3.0 72.9 5.0
22209 1⁄2
QMFY09J112S 1 3 ⁄ 4 in. 5.50 2.63 4.13 3.89 6.75 4.063 0.81 0.99 3.00 3.08 1.88 2.38 0.12 2.87 11
QMFY09J045S 45 mm
QMFY10J115S 1 15 ⁄ 16 in.
146.1 70.1 115.3 103.4 177.8 111.13 19.1 12 24.9 75.9 78.0 48.0 58.4 3.0 72.9 5.4
QMFY10J200S 2 in. 22210 1⁄2
5.75 2.76 4.54 4.07 7.00 4.375 0.75 0.98 2.99 3.07 1.89 2.30 0.12 2.87 12
QMFY10J050S 50 mm
QMFY11J203S 2 3 ⁄ 16 in.
162.1 75.9 130.3 114.3 196.9 127.00 19.1 16 28.7 82.3 84.3 75.9 62.0 3.0 79.2 6.8
QMFY11J204S 2 1 ⁄ 4 in. 22211 5⁄8
6.38 2.99 5.13 4.50 7.75 5.000 0.75 1.13 3.24 3.32 2.99 2.44 0.12 3.12 15
QMFY11J055S 55 mm
QMFY13J060S 60 mm
QMFY13J207S 2 7 ⁄ 16 in. 171.5 91.9 146.1 121.2 206.5 138.13 23.9 16 31.5 88.1 90.4 54.1 72.4 2.3 85.6 8.6
22213 5⁄8
QMFY13J208S 2 1 ⁄ 2 in. 6.75 3.62 5.75 4.77 8.13 5.438 0.94 1.24 3.47 3.56 2.13 2.85 0.09 3.37 19
QMFY13J065S 65 mm
QMFY15J211S 2 11 ⁄ 16 in.
QMFY15J212S 2 3 ⁄ 4 in.
QMFY15J070S 70 mm 199.9 101.9 168.4 141.2 241.3 160.35 23.9 20 31.8 98.6 100.6 60.2 76.2 6.4 91.9 12.7
22215 3⁄4
QMFY15J215S 2 15 ⁄ 16 in. 7.87 4.01 6.63 5.56 9.50 6.313 0.94 1.25 3.88 3.96 2.37 3.00 0.25 3.62 28
QMFY15J300S 3 in.
QMFY15J075S 75 mm
(1)Pilot tolerance: +0/-0.05 mm (+0/-0.002 in.). Continued on next page.
(2)
(3)
Three-bolt housing.
(4)
Six-bolt housing.
(5)
NOTE: Housings also are available with a 3 ⁄ 16 in. machined pilot. Please contact your Timken engineer for more information.

EC Series • QMFY Round Flange Blocks
QMFY Round Flange Blocks – continued

QMFY18J303S 3 3 ⁄ 16 in.
QMFY18J304S 3 1 ⁄ 4 in.
QMFY18J080S 80 mm
241.3 120.9 193.8 170.7 282.7 28.7 24 36.6 108.7 110.7 65.8 85.3 6.4 102.4 19.1
QMFY18J085S 85 mm 22218 N/A 7⁄8
9.50 4.76 7.63 6.72 11.13 1.13 1.44 4.28 4.36 2.59 3.36 0.25 4.03 42
QMFY18J307S 3 7 ⁄ 16 in.
QMFY18J308S 3 1 ⁄ 2 in.
QMFY18J090S 90 mm
QMFY20J311S 3 11 ⁄ 16 in.
QMFY20J312S 3 3 ⁄ 4 in.
273.1 152.4 212.9 193.0 320.8 28.7 24 41.4 123.7 125.7 75.2 96.8 6.9 116.6 29.9
QMFY20J315S 3 15 ⁄ 16 in. 22220 N/A
10.75 6.00 8.38 7.60 12.63 1.13 1 1.63 4.87 4.95 2.96 3.81 0.27 4.59 66
QMFY20J400S 4 in.
QMFY20J100S 100 mm
QMFY22J110S(5) 110 mm
QMFY22J407S(5) 4 7 ⁄ 16 in. 327.2 160.0 254.0 163.6 384.3 31.8 24 46.5 143.5 145.5 94.0 100.3 3.0 140.5 46.3
22222 N/A
QMFY22J408S(5) 4 1 ⁄ 2 in. 12.88(5) 6.30 10.00 6.44(5) 15.13 1.25 1(5) 1.83 5.65 5.73 3.70 3.95 0.12 5.53 102
QMFY22J115S(5) 115 mm
QMFY26J125S(5) 125 mm
QMFY26J415S(5) 4 15 ⁄ 16 in. 355.6 175.0 284.2 177.8 419.1 38.1 24 58.7 170.2 172.2 94.7 138.4 16.8 153.4 52.2
22226 N/A
QMFY26J500S(5) 5 in. 14.00(5) 6.89 11.19 7.00(5) 16.50 1.50 1 1 ⁄ 8 (5) 2.31 6.70 6.78 3.73 5.45 0.66 6.04 115
QMFY26J130S(5) 130 mm
(1)
(2)
(3)
Three-bolt housing.
(4)
Six-bolt housing.
(5)
NOTE: Housings also are available with a 3 ⁄ 16 in. machined pilot. Please contact your Timken engineer for more information.

EC Series • QMFX 5000 SERIES Square Flange Blocks
QMFX 5000 SERIES Square Flange Blocks

QMFX08J035S 35 mm 133.6 59.9 93.7 94.5 117.6 90.50 22.1 12 25.4 72.9 74.9 44.5 57.2 3.0 69.9 4.5
22208 1⁄2
QMFX08J107S 1 7 ⁄ 16 in. 5.26 2.36 3.69 3.72 4.63 3.563 0.88 1.00 2.87 2.95 1.75 2.25 0.12 2.75 10
139.7 59.9 108.0 98.8 130.3 103.20 22.1 12 25.4 73.7 75.7 44.5 59.4 3.81 69.9 4.5
QMFX08J108S 1 1 ⁄ 2 in. 22208 1⁄2
5.50 2.36 4.25 3.89 5.13 4.063 0.88 1.00 2.90 2.98 1.75 2.34 0.15 2.75 10
QMFX09J040S 40 mm
QMFX09J111S 1 11 ⁄ 16 in. 139.7 66.8 108.0 98.8 130.3 103.20 22.1 12 25.1 79.5 81.5 47.8 63.5 6.4 72.9 5.0
22209 1⁄2
QMFX09J112S 1 3 ⁄ 4 in. 5.50 2.63 4.25 3.89 5.13 4.063 0.88 0.99 3.13 3.21 1.88 2.50 0.25 2.87 11
QMFX09J045S 45 mm
QMFX10J115S 1 15 ⁄ 16 in.
146.1 70.1 120.7 103.1 134.9 111.13 22.1 12 24.9 80.8 82.8 48.0 65.0 7.9 72.9 5.0
QMFX10J200S 2 in. 22210 1⁄2
5.75 2.76 4.75 4.06 5.31 4.375 0.88 0.98 3.18 3.26 1.89 2.56 0.31 2.87 11
QMFX10J050S 50 mm
QMFX11J203S 2 3 ⁄ 16 in.
161.5 75.9 130.3 114.3 149.4 127.00 25.4 16 28.7 83.1 85.1 50.5 66.8 3.3 79.2 5.0
QMFX11J204S 2 1 ⁄ 4 in. 22211 5⁄8
6.36 2.99 5.13 4.50 5.88 5.000 1.00 1.13 3.27 3.35 1.99 2.63 0.13 3.12 11
QMFX11J055S 55 mm
QMFX13J060S 60 mm
QMFX13J207S 2 7 ⁄ 16 in. 180.8 91.9 146.1 127.8 157.2 138.13 25.4 16 31.5 89.2 91.2 54.1 72.4 3.0 85.6 6.4
22213 5⁄8
QMFX13J208S 2 1 ⁄ 2 in. 7.12 3.62 5.75 5.03 6.19 5.438 1.00 1.24 3.51 3.59 2.13 2.85 0.12 3.37 14
QMFX13J065S 65 mm
QMFX15J211S 2 11 ⁄ 16 in.
QMFX15J212S 2 3 ⁄ 4 in.
QMFX15J070S 70 mm 215.9 102.1 168.9 152.7 189.0 160.35 26.9 20 31.8 96.0 98.0 60.2 76.2 4.1 91.9 7.7
22215 3⁄4
QMFX15J215S 2 15 ⁄ 16 in. 8.50 4.02 6.65 6.01 7.44 6.313 1.06 1.25 3.78 3.86 2.37 3.00 0.16 3.62 17
QMFX15J300S 3 in.
QMFX15J075S 75 mm
(1)
(2)
(3)

(4)

EC Series • QMFX 5000 SERIES Square Flange Blocks
QMFX 5000 SERIES Square Flange Blocks – continued

QMFX18J303S 3 3 ⁄ 16 in.
QMFX18J304S 3 1 ⁄ 4 in.
QMFX18J080S 80 mm
241.3 120.9 193.8 170.7 212.9 187.33 33.3 20 36.6 107.2 109.2 65.8 84.1 4.8 102.4 10.4
QMFX18J085S 85 mm 22218 3⁄4
9.50 4.76 7.63 6.72 8.38 7.375 1.31 1.44 4.22 4.30 2.59 3.31 0.19 4.03 23
QMFX18J307S 3 7 ⁄ 16 in.
QMFX18J308S 3 1 ⁄ 2 in.
QMFX18J090S 90 mm
QMFX20J311S 3 11 ⁄ 16 in.
QMFX20J312S 3 3 ⁄ 4 in.
298.5 152.4 215.9 211.1 268.2 225.43 38.1 24 41.4 126.0 128.0 75.2 103.1 9.4 116.8 15.9
QMFX20J315S 3 15 ⁄ 16 in. 22220 7⁄8
11.75 6.00 8.50 8.31 10.56 8.875 1.50 1.63 4.96 5.04 2.96 4.06 0.37 4.60 35
QMFX20J400S 4 in.
QMFX20J100S 100 mm
QMFX22J110S(4) 110 mm
QMFX22J407S(4) 4 7 ⁄ 16 in. 327.2 160.0 256.5 163.6 384.3 263.53 31.8 24 46.5 143.8 145.8 94.0 106.9 3.3 140.5 46.3
22222
QMFX22J408S(4) 4 1 ⁄ 2 in. 12.88(1) 6.30 10.10 6.44(1) 15.13 10.375 1.25 1(1) 1.83 5.66 5.74 3.70 4.21 0.13 5.53 102
QMFX22J115S(4) 115 mm
QMFX26J125S(4) 125 mm
QMFX26J415S(4) 4 15 ⁄ 16 in. 355.6 175.0 284.2 177.8 419.1 284.18 38.1 24 58.7 172.2 174.2 94.7 135.1 17.3 153.4 52.2
22226
QMFX26J500S(4) 5 in. 14.00(1) 6.89 11.19 7.00(1) 16.50 11.188 1.50 1 1 ⁄ 8 (1) 2.31 6.78 6.86 3.73 5.32 0.68 6.04 115
QMFX26J130S(4) 130 mm
(1)
(2)
(3)

(4)

EC Series • QMTu Take-up Blocks
QMTU Take-Up Blocks

A C D E F G J K L M N P S Wt.
Part No. Dia. No.
QMTU10J115S 1 15 ⁄ 16 in.
54.1 19.1 120.7 101.6 26.9 26.9 73.2 24.9 153.4 48.0 76.7 88.9 17.5 7.7
QMTU10J200S 2 in. 22210
2.13 0.75 4.75 4.00 1.06 1.06 2.88 0.98 6.04 1.89 3.02 3.50 0.69 17
QMTU10J050S 50 mm
QMTU11J203S 2 3 ⁄ 16 in.
60.5 19.1 133.4 114.3 30.2 30.2 88.9 28.7 167.9 50.5 82.8 95.3 20.6 9.5
QMTU11J204S 2 1 ⁄ 4 in. 22211
2.38 0.75 5.25 4.50 1.19 1.19 3.50 1.13 6.61 1.99 3.26 3.75 0.81 21
QMTU11J055S 55 mm
QMTU13J060S 60 mm
QMTU13J207S 2 7 ⁄ 16 in. 69.9 22.4 149.4 130.3 33.3 33.3 95.3 31.5 193.8 54.1 90.7 120.7 26.9 12.2
22213
QMTU13J208S 2 1 ⁄ 2 in. 2.75 0.88 5.88 5.13 1.31 1.31 3.75 1.24 7.63 2.13 3.57 4.75 1.06 27
QMTU13J065S 65 mm
QMTU15J211S 2 11 ⁄ 16 in.
QMTU15J212S 2 3 ⁄ 4 in.
QMTU15J070S 70 mm 76.2 25.4 171.5 150.9 39.6 39.6 108.0 31.8 219.7 60.2 97.0 120.7 46.0 15.9
22215
QMTU15J215S 2 15 ⁄ 16 in. 3.00 1.00 6.75 5.94 1.56 1.56 4.25 1.25 8.65 2.37 3.82 4.75 1.81 35
QMTU15J300S 3 in.
QMTU15J075S 75 mm
QMTU18J303S 3 3 ⁄ 16 in.
QMTU18J304S 3 1 ⁄ 4 in.
QMTU18J080S 80 mm
92.2 25.4 193.8 173.0 46.0 47.8 124.0 36.6 257.0 65.8 106.4 158.8 46.0 20.0
QMTU18J085S 85 mm 22218
3.63 1.00 7.63 6.81 1.81 1.88 4.88 1.44 10.12 2.59 4.19 6.25 1.81 44
QMTU18J307S 3 7 ⁄ 16 in.
QMTU18J308S 3 1 ⁄ 2 in.
QMTU18J090S 90 mm
QMTU20J311S 3 11 ⁄ 16 in.
QMTU20J312S 3 3 ⁄ 4 in.
104.9 28.7 239.8 219.2 54.1 52.3 143.0 41.4 296.9 75.4 120.4 177.8 52.3 26.3
QMTU20J315S 3 15 ⁄ 16 in. 22220
4.13 1.13 9.44 8.63 2.13 2.06 5.63 1.63 11.69 2.97 4.74 7.00 2.06 58
QMTU20J400S 4 in.
QMTU20J100S 100 mm
QMTU22J110S 110 mm
QMTU22J407S 4 7 ⁄ 16 in. 128.5 38.1 263.7 241.3 54.1 54.1 162.1 46.5 341.4 94.0 143.8 199.9 52.3 36.4
22222
QMTU22J408S 4 1 ⁄ 2 in. 5.06 1.50 10.38 9.50 2.13 2.13 6.38 1.83 13.44 3.70 5.66 7.87 2.06 80
QMTU22J115S 115 mm
QMTU26J125S 125 mm
QMTU26J415S 4 15 ⁄ 16 in. 134.9 63.5 285.8 260.4 63.5 60.5 177.8 58.7 396.7 94.7 151.1 228.6 52.3 60.8
22226
QMTU26J500S 5 in. 5.31 2.50 11.25 10.25 2.50 2.38 7.00 2.31 15.62 3.73 5.95 9.00 2.06 134
QMTU26J130S 130 mm

EC Series • QMMC Cartridge Blocks
QMMC Cartridge Blocks

A B C D F G K M R S Wt.
QMMC10J115S 1 15 ⁄ 16 in. 104.78
13.5 23.1 70.1 4.8 (+0/-0.05) 62.2 24.9 79.2 81.3 48.0 6.1 72.9 3.6
QMMC10J200S 2 in. 22210
0.53 0.91 2.76 0.19 4.125 2.45 0.98 3.12 3.20 1.89 0.24 2.87 8
QMMC10J050S 50 mm (+0/-0.002)
QMMC11J203S 2 3 ⁄ 16 in. 115.09
13.5 23.1 75.9 4.8 (+0/-0.05) 65.5 28.7 83.6 85.6 50.5 4.1 79.2 4.5
QMMC11J204S 2 1 ⁄ 4 in. 22211
0.53 0.91 2.99 0.19 4.531 2.58 1.13 3.29 3.37 1.99 0.16 3.12 10
QMMC11J055S 55 mm (+0/-0.002)
QMMC13J060S(1) 60 mm 127.00
QMMC13J207S(1) 2 7 ⁄ 16 in. 13.5 23.1 91.9 4.8 (+0/-0.05) 69.3 31.5 85.6 87.6 54.1 0.0 85.6 5.4
22213
QMMC13J208S(1) 2 1 ⁄ 2 in. 0.53 0.91 3.62 0.19 5.000 2.73 1.24 3.37 3.45 2.13 0.00 3.37 12
QMMC13J065S(1) 65 mm (+0/-0.002)
QMMC15J211S 2 11 ⁄ 16 in.
QMMC15J212S 2 3 ⁄ 4 in. 149.225
QMMC15J070S 70 mm 15.0 26.2 101.9 6.4 (+0/-0.05) 79.8 31.8 100.1 102.1 60.2 8.1 91.9 8.2
22215
QMMC15J215S 2 15 ⁄ 16 in. 0.59 1.03 4.01 0.25 5.875 3.14 1.25 3.94 4.02 2.37 0.32 3.62 18
QMMC15J300S 3 in. (+0/-0.002)
QMMC15J075S 75 mm
QMMC18J303S 3 3 ⁄ 16 in.
QMMC18J304S 3 1 ⁄ 4 in.
QMMC18J080S 80 mm 171.45
15.0 26.9 120.9 5.8 (+0/-0.05) 87.6 36.6 109.7 111.8 65.0 7.4 102.4 11.8
QMMC18J085S 85 mm 22218
0.59 1.06 4.76 0.23 6.750 3.45 1.44 4.32 4.40 2.56 0.29 4.03 26
QMMC18J307S 3 7 ⁄ 16 in. (+0/-0.002)
QMMC18J308S 3 1 ⁄ 2 in.
QMMC18J090S 90 mm
QMMC20J311S 3 11 ⁄ 16 in.
QMMC20J312S 3 3 ⁄ 4 in. 206.375
19.8 32.5 152.4 7.9 (+0/-0.05) 105.2 41.4 128.0 130.0 75.2 11.4 116.6 14.5
QMMC20J315S 3 15 ⁄ 16 in. 22220
0.78 1.28 6.00 0.31 8.125 4.14 1.63 5.039 5.12 2.96 0.45 4.59 32
QMMC20J400S 4 in. (+0/-0.002)
QMMC20J100S 100 mm
The grub screw is located in the external housing nut to secure to the housing.
(1)

EC Series • QMMC Cartridge Blocks

A B C D F G K M R S Wt.
QMMC22J110S 110 mm 222.25
QMMC22J407S 4 7 ⁄ 16 in. 19.8 38.1 160.0 7.9 (+0/-0.08) 108.5 46.5 148.0 150.1 94.0 7.6 140.5 18.1
22222
QMMC22J408S 4 1 ⁄ 2 in. 0.78 1.50 6.30 0.31 8.75 4.27 1.83 5.83 5.91 3.70 0.30 5.53 40
QMMC22J115S 115 mm (+0/-0.003)
QMMC26J125S 125 mm 265.13
QMMC26J415S 4 15 ⁄ 16 in. 19.8 38.1 175.0 7.9 (+0/-0.08) 141.7 58.7 165.4 167.4 94.7 11.9 153.4 31.8
22226
QMMC26J500S 5 in. 0.78 1.50 6.89 0.31 10.438 5.58 2.31 6.51 6.59 3.73 0.47 6.04 70
QMMC26J130S 130 mm (+0/-0.003)
QMMC30J507S 5 7 ⁄ 16 in. 292.10
19.8 38.1 205.0 5.6 (+0/-0.08) 154.4 75.9 188.2 190.2 116.1 -3.8 192.0 88.0
QMMC30J508S 5 1 ⁄ 2 in. 23230
0.78 1.50 8.07 0.22 11.500 6.08 2.99 7.41 7.49 4.57 -0.15 7.56 194
QMMC30J140S 140 mm (+0/-0.003)
QMMC30J515S 5 15 ⁄ 16 in. 311.15
19.8 38.1 205.0 5.6 (+0/-0.08) 154.4 75.9 188.2 190.2 116.1 -3.8 192.0 87.1
QMMC30J600S 6 in. 23230
0.78 1.50 8.07 0.22 12.250 6.08 2.99 7.41 7.49 4.57 -0.15 7.56 192
QMMC30J150S 150 mm (+0/-0.003)
QMMC34J607S 6 7 ⁄ 16 in.
QMMC34J608S 6 1 ⁄ 2 in. 344.50
QMMC34J170S 170 mm 19.8 38.1 235.0 5.6 (+0/-0.08) 181.1 85.1 219.5 221.5 129.0 5.33 214.1 155.6
23234
QMMC34J615S 6 15 ⁄ 16 in. 0.78 1.50 9.25 0.22 13.563 7.13 3.35 8.64 8.72 5.08 0.21 8.43 343
QMMC34J700S 7 in. (+0/-0.003)
QMMC34J180S 180 mm
The grub screw is located in the external housing nut to secure to the housing.
(1)

EC Series • QMMH Hanger Blocks
QMMH Hanger Blocks

A B C D E F G J K L M R S Wt.
Part No. Dia. No.
in.
QMMH15J211S 2 11 ⁄ 16 in.
QMMH15J212S 2 3 ⁄ 4 in.
QMMH15J070S 70 mm 131.8 212.9 101.9 162.1 50.8 50.8 69.9 31.8 91.9 60.2 0.0 91.9 10.0
22215 1 -8UNC
QMMH15J215S 2 15 ⁄ 16 in. 5.19 8.38 4.01 6.38 2.00 2.00 2.75 1.25 3.62 2.37 0.00 3.62 22
QMMH15J300S 3 in.
QMMH15J075S 75 mm
QMMH18J303S 3 3 ⁄ 16 in.
QMMH18J304S 3 1 ⁄ 4 in.
QMMH18J080S 80 mm
160.3 260.4 120.9 200.2 63.5 76.2 76.2 36.6 99.3 65.8 3.0 102.4 16.3
QMMH18J085S 85 mm 22218 1 1 ⁄ 4 -7UNC
6.31 10.25 4.76 7.88 2.50 3.00 3.00 1.44 3.91 2.59 0.12 4.03 36
QMMH18J307S 3 7 ⁄ 16 in.
QMMH18J308S 3 1 ⁄ 2 in.
QMMH18J090S 90 mm

TA/DV series
TA/DV Series
The TA and DV series feature a 2300-series tapered adapter You Have Choices
sleeve for increased shaft contact. This design offers the best
For the TA and DV series, you can select from many seal options
shaft concentricity and highest capacity all the while having the
and housing styles, which are shown on page C-154.
ability to accommodate undersized shafting.
TA Series Housings
TA series housed unit bearings are a direct drop-in replacement • Two-bolt pillow blocks.
for SAF/SN split-cap housing dimensions. • Four-bolt pillow blocks.
• Flange blocks.
DV Series
DV series housed units are a drop-in replacement for common
American set screw mounted units.
Seals
DuPont Viton (N).

• Steel and urethane open-end covers (CK) with:
Fig. C-46. TA/DV series taper adapter insert.

TA/DV series
TA/DV Series
Cover Backing Plate
Closed-End UFP
Pillow Block • • • • • • • • • •
Flange Block • • • • • • • • • •
V-Lock
Lock)
Take-Up Block • • • • • • • • • •
Pillow Block • • • • • • • • • •
Flange Block • • • • • • • • • • •
Piloted Flange
(Set Screw Lock)
Take-Up Block • • • • • • • • • •
Hangar Block • • • • • • • • • •
Pillow Block • • • • • • • • • •
Flange Block • • • • • • • • • • •
Piloted Flange
(Eccentric Lock)
Take-Up Block • • • • • • • • • •
Hangar Block • • • • • • • • • •
Pillow Block • • • • • • • • • •

(Tapered Adapter
Cartridge • • • • • • • • • •
Pillow Block • • • • • • • • • •
DV Series
Lock)
Piloted Flange
Cartridge • • • • • • • • • •

TA/DV series • DVP Two-Bolt Pillow Blocks
DVP Two-Bolt Pillow Blocks

A B C D min. D max. F G H J L M S Wt.
Part No. Dia. No.
47.8 98.6 65.0 119.1 152.4 174.8 53.3 25.4 12 57.4 30.7 50.3 4.5
DVP09K107S 1 7 ⁄ 16 in. 22209 1⁄2
1.88 3.88 2.56 4.69 6.00 6.88 2.10 1.00 2.26 1.21 1.98 10
DVP09K108S 1 1 ⁄ 2 in. 54.1 104.9 65.0 119.1 165.1 200.2 53.3 25.4 12 57.4 30.7 50.3 4.5
22209 1⁄2
DVP09K040S 40 mm 2.13 4.13 2.56 4.69 6.50 7.88 2.10 1.00 2.26 1.21 1.98 10
54.1 114.3 70.1 144.8 165.1 200.2 54.9 31.8 12 61.0 33.5 55.1 5.0
DVP10K111S 1 11 ⁄ 16 in. 22210 1⁄2
2.13 4.50 2.76 5.70 6.50 7.88 2.16 1.25 2.40 1.32 2.17 11
DVP10K112S 1 3 ⁄ 4 in. 57.2 117.3 70.1 158.8 180.8 225.6 54.9 31.8 16 61.0 33.5 55.1 5.0
22210 5⁄8
DVP10K045S 45 mm 2.25 4.62 2.76 6.25 7.12 8.88 2.16 1.25 2.40 1.32 2.17 11
DVP11K115S 1 15 ⁄ 16 in.
57.2 123.4 74.9 152.4 181.1 225.6 61.7 31.8 16 66.5 35.6 58.9 5.9
DVP11K200S 2 in. 22211 5⁄8
2.25 4.86 2.95 6.00 7.13 8.88 2.43 1.25 2.62 1.40 2.32 13
DVP11K050S 50 mm
DVP13K203S 2 3 ⁄ 16 in.
63.5 138.9 85.1 165.1 200.0 244.6 70.6 32.8 16 74.9 39.6 65.0 9.1
DVP13K204S 2 1 ⁄ 4 in. 22213 5⁄8
2.50 5.47 3.35 6.50 7.87 9.63 2.78 1.29 2.95 1.56 2.56 20
DVP13K060S 60 mm
DVP15K207S 2 7 ⁄ 16 in.
69.9 149.9 98.0 174.8 219.2 260.4 68.6 35.1 16 78.2 43.9 73.4 11.3
DVP15K208S 2 1 ⁄ 2 in. 22215 5⁄8
2.75 5.90 3.86 6.88 8.63 10.25 2.70 1.38 3.08 1.73 2.89 25
DVP15K065S 65 mm
DVP17K215S 2 15 ⁄ 16 in.
82.6 173.2 110.0 200.2 244.3 295.4 76.2 35.1 20 88.1 49.8 82.0 14.5
DVP17K300S 3 in. 22217 3⁄4
3.25 6.82 4.33 7.88 9.62 11.63 3.00 1.38 3.47 1.96 3.23 32
DVP17K075S 75 mm
DVP20K307S 3 7 ⁄ 16 in.
95.3 202.7 130.0 238.3 285.8 342.9 85.9 47.8 24 101.3 58.4 97.0 25.9
DVP20K308S 3 1 ⁄ 2 in. 22220 7⁄8
3.75 7.98 5.12 9.38 11.25 13.50 3.38 1.88 3.99 2.30 3.82 57
DVP20K090S 90 mm
DVP22K315S 3 15 ⁄ 16 in.
108.0 223.5 145.0 255.5 317.5 362.0 100.6 38.1 24 113.3 63.0 104.9 30.4
DVP22K400S 4 in. 22222
4.25 8.80 5.71 10.06 12.50 14.25 3.96 1.50 1 4.46 2.48 4.13 67
DVP22K100S 100 mm

TA/DV series • TAPA SAF-STYLE Two-Bolt Pillow Blocks
TAPA SAF-STYLE Two-Bolt Pillow Blocks

Part No. Dia. No.
TAPA09K107S 1 7 ⁄ 16 in.
57.2 108.0 65.0 158.8 177.8 209.6 53.3 29.0 12 57.4 30.7 50.3 4.5
TAPA09K108S 1 1 ⁄ 2 in. 22209 1⁄2
2.25 4.25 2.56 6.25 7.00 8.25 2.10 1.14 2.26 1.21 1.98 10
TAPA09K040S 40 mm
TAPA10K111S 1 11 ⁄ 16 in.
63.5 123.7 70.1 165.1 177.8 209.6 54.9 31.8 12 61.0 33.5 55.1 5.9
TAPA10K112S 1 3 ⁄ 4 in. 22210 1⁄2
2.50 4.87 2.76 6.50 7.00 8.25 2.16 1.25 2.40 1.32 2.17 13
TAPA10K045S 45 mm
TAPA11K115S 1 15 ⁄ 16 in.
69.9 135.4 74.9 165.1 221.0 251.0 60.5 31.8 16 65.8 35.6 58.9 7.7
TAPA11K200S 2 in. 22211 5⁄8
2.75 5.33 2.95 6.50 8.70 9.88 2.38 1.25 2.59 1.40 2.32 17
TAPA11K050S 50 mm
TAPA13K203S 2 3 ⁄ 16 in.
76.2 151.1 85.1 182.9 233.7 261.9 68.6 31.2 16 73.9 39.6 65.0 10.4
TAPA13K204S 2 1 ⁄ 4 in. 22213 5⁄8
3.00 5.95 3.35 7.20 9.20 10.31 2.70 1.23 2.91 1.56 2.56 23
TAPA13K060S 60 mm
TAPA15K207S 2 7 ⁄ 16 in.
82.6 163.3 98.0 200.2 244.6 276.4 68.6 31.8 16 78.2 43.9 72.9 12.2
TAPA15K208S 2 1 ⁄ 2 in. 22215 5⁄8
3.25 6.43 3.86 7.88 9.63 10.88 2.70 1.25 3.08 1.73 2.87 27
TAPA15K065S 65 mm
TAPA17K215S 2 15 ⁄ 16 in.
95.3 185.9 110.0 241.3 279.4 320.8 76.2 33.8 20 88.1 49.8 82.0 15.0
TAPA17K300S 3 in. 22217 3⁄4
3.75 7.32 4.33 9.50 11.00 12.63 3.00 1.33 3.47 1.96 3.23 33
TAPA17K075S 75 mm
TAPA20K307S 3 7 ⁄ 16 in.
114.3 219.2 130.0 276.4 327.2 368.3 86.9 41.4 24 102.4 58.4 97.0 29.5
TAPA20K308S 3 1 ⁄ 2 in. 22220 7⁄8
4.50 8.63 5.12 10.88 12.88 14.50 3.42 1.63 4.03 2.30 3.82 65
TAPA20K090S 90 mm
TAPA22K315S 3 15 ⁄ 16 in.
125.5 240.5 145.0 317.5 368.3 406.4 100.6 50.8 24 113.5 63.0 104.9 38.1
TAPA22K400S 4 in. 22222 7⁄8
4.94 9.47 5.71 12.50 14.50 16.00 3.96 2.00 4.47 2.48 4.13 84
TAPA22K100S 100 mm
TAPA26K407S 4 7 ⁄ 16 in.
152.4 284.0 165.1 362.0 400.1 444.5 128.0 51.8 24 135.9 71.9 120.9 61.7
TAPA26K408S 4 1 ⁄ 2 in. 22226
6.00 11.18 6.50 14.25 15.75 17.50 5.04 2.04 1 5.35 2.83 4.76 136
TAPA26K115S 115 mm
TAPA28K415S 4 15 ⁄ 16 in.
152.4 290.8 180.1 384.3 447.8 499.9 85.6 51.8 30 120.4 77.5 131.1 61.8
TAPA28K500S 5 in. 22228
6.00 11.45 7.09 15.13 17.63 19.68 3.37 2.04 1 1⁄4 4.74 3.05 5.16 136
TAPA28K125S 125 mm

TA/DV series • TAPN SN-STYLE Two-Bolt Pillow Blocks
TAPN SN-STYLE Two-Bolt

Pillow Blocks

Part No. Dia. No.
TAPN09K107S 1 7 ⁄ 16 in.
60.0 108.0 65.0 158.8 177.8 209.6 53.3 29.0 12 57.4 30.7 50.3 4.5
TAPN09K108S 1 1 ⁄ 2 in. 22209 1⁄2
2.362 4.25 2.56 6.25 7.00 8.25 2.10 1.14 2.26 1.21 1.98 10
TAPN09K040S 40 mm
TAPN10K111S 1 11 ⁄ 16 in.
60.0 120.1 70.1 165.1 177.8 209.6 54.9 28.2 12 61.0 33.5 55.1 5.9
TAPN10K112S 1 3 ⁄ 4 in. 22210 1⁄2
2.362 4.73 2.76 6.50 7.00 8.25 2.16 1.11 2.40 1.32 2.17 13
TAPN10K045S 45 mm
TAPN11K115S 1 15 ⁄ 16 in.
69.9 135.4 74.9 165.1 221.0 251.0 60.5 31.8 16 65.8 35.6 58.9 7.7
TAPN11K200S 2 in. 22211 5⁄8
2.75 5.33 2.95 6.50 8.70 9.88 2.38 1.25 2.59 1.40 2.32 17
TAPN11K050S 50 mm
70.0 140.5 79.8 177.8 219.2 254.0 60.5 31.8 16 67.6 37.6 62.0 9.1
TAPN12K055S 55 mm 22212 5⁄8
2.756 5.53 3.14 7.00 8.63 10.00 2.38 1.25 2.66 1.48 2.44 20
TAPN13K203S 2 3 ⁄ 16 in.
80.0 154.9 85.1 182.9 233.7 261.9 68.6 35.1 16 73.9 39.6 65.0 10.4
TAPN13K204S 2 1 ⁄ 4 in. 22213 5⁄8
3.15 6.10 3.35 7.20 9.20 10.31 2.70 1.38 2.91 1.56 2.56 23
TAPN13K060S 60 mm
TAPN15K207S 2 7 ⁄ 16 in.
80.0 160.8 98.0 200.2 244.6 276.4 68.6 29.2 16 78.2 43.9 72.9 12.2
TAPN15K208S 2 1 ⁄ 2 in. 22215 5⁄8
3.15 6.33 3.86 7.88 9.63 10.88 2.70 1.15 3.08 1.73 2.87 27
TAPN15K065S 65 mm
TAPN16K211S 2 11 ⁄ 16 in.
95.0 180.3 104.6 235.0 266.7 315.0 72.6 31.8 20 83.8 47.5 78.0 13.6
TAPN16K212S 2 3 ⁄ 4 in. 22216 3⁄4
3.74 7.10 4.12 9.25 10.50 12.40 2.86 1.25 3.30 1.87 3.07 30
TAPN16K070S 70 mm
TAPN17K215S 2 15 ⁄ 16 in.
95.3 185.9 110.0 241.3 279.4 320.8 76.2 33.8 20 88.1 49.8 82.0 15.0
TAPN17K300S 3 in. 22217 3⁄4
3.75 7.32 4.33 9.50 11.00 12.63 3.00 1.33 3.47 1.96 3.23 33
TAPN17K075S 75 mm
TAPN18K080S 80 mm
100.0 195.3 119.6 285.8 295.4 346.2 79.8 38.9 20 91.7 52.1 86.1 22.2
TAPN18K303S 3 3 ⁄ 16 in. 22218 3⁄4
3.937 7.69 4.71 11.25 11.63 13.63 3.14 1.53 3.61 2.05 3.39 49
TAPN18K304S 3 1 ⁄ 4 in.
112.0 212.3 124.7 285.8 295.4 346.2 82.8 38.9 20 96.0 54.6 89.9 23.1
TAPN19K085S 85 mm 22219 3⁄4
4.409 8.36 4.91 11.25 11.63 13.63 3.26 1.53 3.78 2.15 3.54 51
TAPN20K307S 3 7 ⁄ 16 in.
112.0 216.9 130.0 276.4 327.2 368.3 86.9 38.9 24 102.4 58.4 97.0 29.5
TAPN20K308S 3 1 ⁄ 2 in. 22220 7⁄8
4.409 8.54 5.12 10.88 12.88 14.50 3.42 1.53 4.03 2.30 3.82 65
TAPN20K090S 90 mm
TAPN22K315S 3 15 ⁄ 16 in.
125.0 240.5 145.0 317.5 368.3 406.4 100.6 50.8 24 113.5 63.0 104.9 38.1
TAPN22K400S 4 in. 22222 7⁄8
4.921 9.47 5.71 12.50 14.50 16.00 3.96 2.00 4.47 2.48 4.13 84
TAPN22K100S 100 mm
TAPN24K403S 4 3 ⁄ 16 in.
140.0 262.9 154.4 344.4 355.6 409.7 97.8 50.8 24 116.1 67.1 112.0 49.9
TAPN24K404S 4 1 ⁄ 4 in. 22224 7⁄8
5.512 10.35 6.08 13.56 14.00 16.13 3.85 2.00 4.57 2.64 4.41 110
TAPN24K110S 110 mm
TAPN26K407S 4 7 ⁄ 16 in.
150.0 281.7 165.1 367.3 400.1 444.5 128.0 49.3 24 135.9 71.9 120.9 61.7
TAPN26K408S 4 1 ⁄ 2 in. 22226
5.906 11.09 6.50 14.46 15.75 17.50 5.04 1.94 1 5.35 2.83 4.76 136
TAPN26K115S 115 mm
TAPN28K415S 4 15 ⁄ 16 in.
150.0 288.5 180.1 384.3 447.8 499.9 85.6 49.3 30 120.4 77.5 131.1 61.8
TAPN28K500S 5 in. 22228
5.906 11.36 7.09 15.13 17.63 19.68 3.37 1.94 1 1⁄4 4.74 3.05 5.16 136
TAPN28K125S 125 mm

TA/DV series • TAPKT 9000 SERIES Two-Bolt Pillow Blocks
TAPKT 9000 SERIES TWO-BOLT PILLOW BLOCKS

Part No. Dia. No.
TAPKT13K203S 2 3 ⁄ 16 in.
76.2 153.7 85.1 194.6 223.0 285.8 73.7 35.1 20 76.5 36.6 65.0 10.0
TAPKT13K204S 2 1 ⁄ 4 in. 22213 3⁄4
3.00 6.05 3.35 7.66 8.78 11.25 2.90 1.38 3.01 1.56 2.56 22
TAPKT13K060S 60 mm
TAPKT15K207S 2 7 ⁄ 16 in.
88.9 173.7 98.0 230.1 265.2 330.2 75.7 35.1 24 81.8 43.9 72.9 12.7
TAPKT15K208S 2 1 ⁄ 2 in. 22215 7⁄8
3.50 6.84 3.86 9.06 10.44 13.00 2.98 1.38 3.22 1.73 2.87 28
TAPKT15K065S 65 mm

TA/DV series • DVPF Four-Bolt Pillow Blocks
DVPF Four-Bolt Pillow Blocks

A B C D min. D max. E F G H J L M S Wt.
Part No. Dia. No.
DVPF17K215S 2 15 ⁄ 16 in.
82.6 172.5 110.0 193.0 231.1 47.8 265.2 79.5 32.8 16 86.6 49.8 82.0 23.1
DVPF17K300S 3 in. 22217 5⁄8
3.25 6.79 4.33 7.60 9.10 1.88 10.44 3.13 1.29 3.41 1.96 3.23 51
DVPF17K075S 75 mm
DVPF20K307S 3 7 ⁄ 16 in.
95.3 200.2 130.0 225.6 276.4 50.8 312.4 95.3 39.6 20 101.3 58.4 97.0 31.8
DVPF20K308S 3 1 ⁄ 2 in. 22220 3⁄4
3.75 7.88 5.12 8.88 10.88 2.00 12.30 3.75 1.56 3.99 2.30 3.82 70
DVPF20K090S 90 mm
DVPF22K315S 3 15 ⁄ 16 in.
108.0 223.0 145.0 276.4 339.9 57.2 378.0 109.5 35.6 20 110.7 63.0 104.9 38.6
DVPF22K400S 4 in. 22222 3⁄4
4.25 8.78 5.71 10.88 13.38 2.25 14.88 4.31 1.40 4.36 2.48 4.13 85
DVPF22K100S 100 mm
DVPF26K407S 4 7 ⁄ 16 in.
120.7 250.7 165.1 302.3 368.3 63.5 409.7 120.7 40.1 20 123.7 71.9 120.1 62.1
DVPF26K408S 4 1 ⁄ 2 in. 22226 3⁄4
4.75 9.87 6.50 11.90 14.50 2.50 16.13 4.75 1.58 4.87 2.83 4.73 137
DVPF26K115S 115 mm

TA/DV series • TAPK 9000 SERIES Four-Bolt Pillow Blocks
TAPK 9000 SERIES Four-Bolt Pillow Blocks

Part No. Dia. No.
TAPK15K207S 2 7 ⁄ 16 in.
88.9 173.5 98.0 230.1 265.2 69.9 330.2 108.0 39.1 20 98.0 43.9 72.9 13.2
TAPK15K208S 2 1 ⁄ 2 in. 22215 3⁄4
3.50 6.83 3.86 9.06 10.44 2.75 13.00 4.25 1.54 3.86 1.73 2.87 29
TAPK15K065S 65 mm
TAPK17K215S 2 15 ⁄ 16 in.
101.6 201.2 110.0 274.6 309.6 76.2 381.0 120.7 38.1 20 110.2 49.8 82.0 16.8
TAPK17K300S 3 in. 22217 3⁄4
4.00 7.92 4.33 10.81 12.19 3.00 15.00 4.75 1.50 4.34 1.96 3.23 37
TAPK17K075S 75 mm
TAPK20K307S 3 7 ⁄ 16 in.
127.0 239.8 130.0 317.5 355.6 88.9 425.5 139.7 41.4 24 128.3 58.4 97.0 31.8
TAPK20K308S 3 1 ⁄ 2 in. 22220 7⁄8
5.00 9.44 5.12 12.50 14.00 3.50 16.75 5.50 1.63 5.05 2.30 3.82 70
TAPK20K090S 90 mm
TAPK22K315S 3 15 ⁄ 16 in.
146.1 273.8 145.0 354.1 395.2 101.6 469.9 158.8 45.7 24 138.2 63.0 104.9 39.5
TAPK22K400S 4 in. 22222
5.75 10.78 5.71 13.94 15.56 4.00 18.50 6.25 1.80 1 5.44 2.48 4.13 87
TAPK22K100S 100 mm
TAPK26K407S 4 7 ⁄ 16 in.
155.6 283.2 165.1 387.4 425.5 108.0 514.4 171.5 50.8 24 157.5 71.9 120.9 61.7
TAPK26K408S 4 1 ⁄ 2 in. 22226
6.125 11.15 6.50 15.25 16.75 4.25 20.25 6.75 2.00 1 1⁄8 6.20 2.83 4.76 136
TAPK26K115S 115 mm

TA/DV series • TAPH SAF-STYLE Four-Bolt Pillow Blocks
TAPH SAF-STYLE Four-Bolt Pillow Blocks

Part No. Dia. No.
TAPH11K115S 1 15 ⁄ 16 in.
69.9 134.9 74.9 182.4 217.4 39.9 251.0 68.6 31.8 16 69.9 35.6 58.9 8.6
TAPH11K200S 2 in. 22211 5⁄8
2.75 5.31 2.95 7.18 8.56 1.57 9.88 2.70 1.25 2.75 1.40 2.32 19
TAPH11K050S 50 mm
TAPH13K203S 2 3 ⁄ 16 in.
76.2 151.1 85.1 182.4 217.4 50.8 261.9 82.6 31.2 12 81.0 39.6 65.0 11.3
TAPH13K204S 2 1 ⁄ 4 in. 22213 1⁄2
3.00 5.95 3.35 7.18 8.56 2.00 10.31 3.25 1.23 3.19 1.56 2.56 25
TAPH13K060S 60 mm
TAPH15K207S 2 7 ⁄ 16 in.
82.6 162.1 98.0 201.7 246.1 47.8 276.4 79.5 32.8 12 83.6 43.9 72.9 13.2
TAPH15K208S 2 1 ⁄ 2 in. 22215 1⁄2
3.25 6.38 3.86 7.94 9.69 1.88 10.88 3.13 1.29 3.29 1.73 2.87 29
TAPH15K065S 65 mm
TAPH17K215S 2 15 ⁄ 16 in.
95.3 182.9 110.0 239.8 287.3 54.1 320.8 92.2 32.0 16 96.0 49.8 82.0 16.8
TAPH17K300S 3 in. 22217 5⁄8
3.75 7.20 4.33 9.44 11.31 2.13 12.63 3.63 1.26 3.78 1.96 3.23 37
TAPH17K075S 75 mm
TAPH20K307S 3 7 ⁄ 16 in.
114.3 216.9 130.0 276.4 339.9 60.5 381 109.5 41.9 20 113.3 58.4 97.0 31.8
TAPH20K308S 3 1 ⁄ 2 in. 22220 3⁄4
4.50 8.54 5.12 10.88 13.38 2.38 15.00 4.31 1.65 4.46 2.30 3.82 70
TAPH20K090S 90 mm
TAPH22K315S 3 15 ⁄ 16 in.
125.5 238.3 145.0 301.8 368.3 69.9 406.4 120.7 45.0 20 123.4 63.0 104.9 39.5
TAPH22K400S 4 in. 22222 3⁄4
4.94 9.38 5.71 11.88 14.50 2.75 16.00 4.75 1.77 4.86 2.48 4.13 87
TAPH22K100S 100 mm
TAPH26K407S 4 7 ⁄ 16 in.
152.4 284.0 165.1 362.0 400.1 82.6 444.5 128.0 51.8 24 135.9 71.9 120.9 61.7
TAPH26K408S 4 1 ⁄ 2 in. 22226 3⁄4
6.00 11.18 6.50 14.25 15.75 3.25 17.50 5.04 2.04 5.35 2.83 4.76 136
TAPH26K115S 115 mm
TAPH28K415S 4 15 ⁄ 16 in.
152.4 290.8 180.1 406.4 435.1 85.9 500.4 128.0 51.8 24 141.5 77.5 131.1 61.8
TAPH28K500S 5 in. 22228
6.00 11.45 7.09 16.00 17.13 3.38 19.70 5.04 2.04 1 5.57 3.05 5.16 136
TAPH28K125S 125 mm

TA/DV series • TAPG SN-STYLE Four-Bolt Pillow Blocks
TAPG SN-STYLE Four-Bolt

Pillow Blocks

Part No. Dia. No.
TAPG11K115S 1 15 ⁄ 16 in.
69.9 134.9 74.9 182.4 217.4 39.9 251.0 68.6 31.8 16 69.9 35.6 58.9 8.6
TAPG11K200S 2 in. 22211 5⁄8
2.75 5.31 2.95 7.18 8.56 1.57 9.88 2.70 1.25 2.75 1.40 2.32 19
TAPG11K050S 50 mm
70.0 140.5 79.8 177.8 219.2 35.1 254.0 69.9 31.8 12 72.6 37.6 62.0 9.9
TAPG12K055S 55 mm 22212 1⁄2
2.756 5.53 3.14 7.00 8.63 1.38 10.00 2.75 1.25 2.86 1.48 2.44 22
TAPG13K203S 2 3 ⁄ 16 in.
80.0 154.9 85.1 182.4 217.4 48.0 261.9 82.6 35.1 16 81.0 39.6 65.0 11.3
TAPG13K204S 2 1 ⁄ 4 in. 22213 5⁄8
3.15 6.10 3.35 7.18 8.56 1.89 10.31 3.25 1.38 3.19 1.56 2.56 25
TAPG13K060S 60 mm
TAPG15K207S 2 7 ⁄ 16 in.
80.0 162.1 98.0 201.7 246.1 39.6 276.4 79.5 30.2 16 83.8 43.9 72.9 13.2
TAPG15K208S 2 1 ⁄ 2 in. 22215 5⁄8
3.15 6.38 3.86 7.94 9.69 1.56 10.88 3.13 1.19 3.30 1.73 2.87 29
TAPG15K065S 65 mm
TAPG16K211S 2 11 ⁄ 16 in.
95.0 180.3 104.6 235.0 266.7 50.0 315.0 89.9 31.8 16 92.5 47.5 78.0 14.9
TAPG16K212S 2 3 ⁄ 4 in. 22216 5⁄8
3.74 7.10 4.12 9.25 10.50 1.97 12.40 3.54 1.25 3.64 1.87 3.07 33
TAPG16K070S 70 mm
TAPG17K215S 2 15 ⁄ 16 in.
95.0 182.9 110.0 239.8 287.3 52.3 320.8 92.2 31.8 20 96.0 49.8 82.0 16.8
TAPG17K300S 3 in. 22217 3⁄4
3.74 7.20 4.33 9.44 11.31 2.06 12.63 3.63 1.25 3.78 1.96 3.23 37
TAPG17K075S 75 mm
TAPG18K080S 80 mm
100.0 195.3 119.6 282.7 298.5 50.0 344.9 100.1 39.6 16 102.1 52.1 86.1 24.5
TAPG18K303S 3 3 ⁄ 16 in. 22218 5⁄8
3.937 7.69 4.71 11.13 11.75 1.97 13.58 3.94 1.56 4.02 2.05 3.39 54
TAPG18K304S 3 1 ⁄ 4 in.
112.0 212.3 124.7 282.7 298.5 50.0 344.9 100.1 39.6 16 104.6 54.6 89.9 25.4
TAPG19K085S 85 mm 22219 5⁄8
4.409 8.36 4.91 11.13 11.75 1.97 13.58 3.94 1.56 4.12 2.15 3.54 56
TAPG20K307S 3 7 ⁄ 16 in.
112.0 214.6 130.0 276.4 339.9 60.5 381.0 109.5 39.6 20 113.3 58.4 97.0 31.8
TAPG20K308S 3 1 ⁄ 2 in. 22220 3⁄4
4.409 8.45 5.12 10.88 13.38 2.38 15.00 4.31 1.56 4.46 2.30 3.82 70
TAPG20K090S 90 mm
TAPG22K315S 3 15 ⁄ 16 in.
112.0 238.3 145.0 301.8 368.3 69.9 406.4 120.7 44.5 20 123.4 63.0 104.9 39.5
TAPG22K400S 4 in. 22222 3⁄4
4.921 9.38 5.71 11.88 14.50 2.75 16.00 4.75 1.75 4.86 2.48 4.13 87
TAPG22K100S 100 mm
TAPG24K403S 4 3 ⁄ 16 in.
140.0 262.9 154.4 342.9 355.6 70.1 410.0 120.7 50.8 16 127.5 67.1 112.0 49.9
TAPG24K404S 4 1 ⁄ 4 in. 22224 5⁄8
5.512 10.35 6.08 13.50 14.00 2.76 16.14 4.75 2.00 5.02 2.64 4.41 110
TAPG24K110S 110 mm
TAPG26K407S 4 7 ⁄ 16 in.
150.0 281.7 165.1 367.28 400.1 81.0 444.5 128.0 49.3 24 135.9 71.88 120.9 61.7
TAPG26K408S 4 1 ⁄ 2 in. 22226
5.906 11.09 6.50 14.46 15.75 3.19 17.50 5.04 1.94 1 5.35 2.83 4.76 136
TAPG26K115S 115 mm
TAPG28K415S 4 15 ⁄ 16 in.
150.0 288.4 180.1 384.3 447.8 80.0 500.4 128.0 49.3 24 141.5 77.5 131.1 61.8
TAPG28K500S 5 in. 22228
5.906 11.36 7.09 15.13 17.63 3.15 19.70 5.04 1.94 1 5.57 3.05 5.16 136
TAPG28K125S 125 mm

TA/DV series • DVC Piloted Flange Cartridges
DVC Piloted Flange Cartridges

B.C. C E F G(1) H I J L M N R S Wt.
Part No. Dia. No.
DVC09K107S 1 7 ⁄ 16 in.
111.3 65.0 78.5 133.4 92.1 26.7 48.3 10 55.4 30.7 23.9 5.1 50.3 4.1
DVC09K108S 1 1 ⁄ 2 in. 22209 7 ⁄ 16
4.38 2.56 3.09 5.25 3.625 1.05 1.90 2.18 1.21 0.94 0.20 1.98 9
DVC09K040S 40 mm
DVC10K111S 1 11 ⁄ 16 in.
130.3 70.1 91.9 155.7 107.95 26.7 58.9 10 60.1 33.5 25.4 5.1 55.1 4.5
DVC10K112S 1 3 ⁄ 4 in. 22210 7 ⁄ 16
5.13 2.76 3.62 6.13 4.250 1.05 2.32 2.37 1.32 1.00 0.20 2.17 10
DVC10K045S 45 mm
DVC11K115S 1 15 ⁄ 16 in.
136.7 74.9 96.5 162.1 114.3 31.5 62.2 10 63.2 35.6 25.4 4.1 58.9 5.0
DVC11K200S 2 in. 22211 7 ⁄ 16
5.38 2.95 3.80 6.38 4.500 1.24 2.45 2.49 1.40 1.00 0.16 2.32 11
DVC11K050S 50 mm
DVC13K203S 2 3 ⁄ 16 in.
152.4 82.6 107.7 181.1 127.0 37.3 84.8 12 65.5 39.6 25.4 -2.8 65.0 7.3
DVC13K204S 2 1 ⁄ 4 in. 22213 1⁄2
6.00 3.35 4.24 7.13 5.000 1.47 3.34 2.58 1.56 1.00 -0.11 2.56 16
DVC13K060S 60 mm
DVC15K207S 2 7 ⁄ 16 in.
165.1 98.0 116.8 193.8 139.7 32.3 79.0 12 69.9 43.9 31.8 3.6 72.9 8.2
DVC15K208S 2 1 ⁄ 2 in. 22215 1⁄2
6.50 3.86 4.60 7.63 5.500 1.27 3.11 2.75 1.73 1.25 0.14 2.87 18
DVC15K065S 65 mm
DVC17K215S 2 15 ⁄ 16 in.
190.5 110.0 134.6 222.3 161.9 32.5 90.2 16 79.8 49.8 35.1 2.3 82.0 11.3
DVC17K300S 3 in. 22217 5⁄8
7.50 4.33 5.30 8.75 6.375 1.28 3.55 3.14 1.96 1.38 0.09 3.23 25
DVC17K075S 75 mm
DVC20K307S 3 7 ⁄ 16 in.
219.2 130.0 154.9 260.4 187.3 41.1 106.2 20 91.9 58.4 35.1 5.1 97.0 16.8
DVC20K308S 3 1 ⁄ 2 in. 22220 3⁄4
8.63 5.12 6.10 10.25 7.375 1.62 4.18 3.62 2.30 1.38 0.20 3.82 37
DVC20K090S 90 mm
DVC22K315S 3 15 ⁄ 16 in.
238.3 145.0 168.4 276.4 206.4 48.0 116.8 20 100.1 63.0 38.1 4.6 104.9 26.3
DVC22K400S 4 in. 22222 3⁄4
9.38 5.71 6.63 10.88 8.125 1.89 4.60 3.94 2.48 1.50 0.18 4.13 58
DVC22K100S 100 mm
DVC26K407S(2) 4 7 ⁄ 16 in.
298.5 165.1 149.4 342.9 260.4 47.0 137.9 20 116.8 71.9 48.3 4.1 120.9 34.5
DVC26K408S(2) 4 1 ⁄ 2 in. 22226 3 ⁄ 4 (2)
11.75(2) 6.50 5.88(2) 13.50 10.250 1.85 5.43 4.60 2.83 1.90 0.16 4.76 76
DVC26K115S(2) 115 mm
(1)
Six-bolt housing.
(2)

TA/DV series • TAFC Square Piloted Flange Cartridges
TAFC Square Piloted Flange Cartridges

A B.C. C D(1) E F G H J L M N S Wt.
Part No. Dia. No.
TAFC15K207S 2 7 ⁄ 16 in.
255.0 215.1 98.0 169.9 152.4 192.0 25.4 23.9 16 79.5 43.9 64.8 72.9 11.3
TAFC15K208S 2 1 ⁄ 2 in. 22215 5⁄8
10.04 8.47 3.86 6.690 6.00 7.56 1.00 0.94 3.13 1.73 2.55 2.87 25
TAFC15K065S 65 mm
TAFC17K215S 2 15 ⁄ 16 in.
282.4 240.0 110.0 190.0 169.7 212.1 25.4 25.4 16 88.6 49.8 69.9 82.0 13.6
TAFC17K300S 3 in. 22217 5⁄8
11.12 9.45 4.33 7.480 6.68 8.35 1.00 1.00 3.49 1.96 2.75 3.23 30
TAFC17K075S 75 mm
TAFC20K307S 3 7 ⁄ 16 in.
330.2 279.9 130.0 230.1 197.9 247.9 31.8 28.7 20 105.7 58.4 94.2 97.0 18.1
TAFC20K308S 3 1 ⁄ 2 in. 22220 3⁄4
13.00 11.02 5.12 9.060 7.79 9.76 1.25 1.13 4.16 2.30 3.71 3.82 40
TAFC20K090S 90 mm
TAFC22K315S 3 15 ⁄ 16 in.
367.0 309.9 145.0 255.0 219.2 274.3 44.5 26.4 20 113.0 63.0 101.1 104.9 27.2
TAFC22K400S 4 in. 22222 3⁄4
14.45 12.20 5.71 10.039 8.63 10.80 1.75 1.04 4.45 2.48 3.98 4.13 60
TAFC22K100S 100 mm
TAFC26K407S 4 7 ⁄ 16 in.
411.5 355.1 165.1 290.0 251.0 298.5 41.9 32.0 24 130.6 71.9 114.3 120.9 42.6
TAFC26K408S 4 1 ⁄ 2 in. 22226 7⁄8
16.20 13.98 6.50 11.417 9.88 11.75 1.65 1.26 5.14 2.83 4.50 4.76 94
TAFC26K115S 115 mm
(1)

TA/DV series • TAFB Square Flange Blocks
TAFB Square Flange Blocks

A B.C. C D E F G H J L M N S Wt.
Part No. Dia. No.
TAFB15K207S 2 7 ⁄ 16 in.
255.0 215.1 98.0 169.9 152.4 192.0 25.4 23.9 16 73.7 43.9 64.8 72.9 11.3
TAFB15K208S 2 1 ⁄ 2 in. 22215 5⁄8
10.04 8.47 3.86 6.69 6.00 7.56 1.00 0.94 2.90 1.73 2.55 2.87 25
TAFB15K065S 65 mm
TAFB17K215S 2 15 ⁄ 16 in.
282.4 240.0 110.0 190.0 169.7 212.1 25.4 25.4 16 88.6 49.8 69.9 82.0 13.6
TAFB17K300S 3 in. 22217 5⁄8
11.12 9.45 4.33 7.48 6.68 8.35 1.00 1.00 3.49 1.96 2.75 3.23 30
TAFB17K075S 75 mm
TAFB20K307S 3 7 ⁄ 16 in.
330.2 280.0 130.0 230.1 197.9 247.9 31.8 28.7 20 105.7 58.4 94.2 97.0 18.1
TAFB20K308S 3 1 ⁄ 2 in. 22220 3⁄4
13.00 11.02 5.12 9.06 7.79 9.76 1.25 1.13 4.16 2.30 3.71 3.82 40
TAFB20K090S 90 mm
TAFB22K315S 3 15 ⁄ 16 in.
367.0 309.9 145.0 255.0 219.2 279.4 44.5 26.4 20 113.0 63.0 101.1 104.9 27.2
TAFB22K400S 4 in. 22222 3⁄4
14.45 12.20 5.71 10.04 8.63 11.00 1.75 1.04 4.45 2.48 3.98 4.13 60
TAFB22K100S 100 mm
TAFB26K407S 4 7 ⁄ 16 in.
411.5 354.8 165.1 290.0 251.0 298.5 41.9 32.0 24 130.6 71.9 114.3 120.9 42.6
TAFB26K408S 4 1 ⁄ 2 in. 22226 7⁄8
16.20 13.97 6.50 11.42 9.88 11.75 1.65 1.26 5.14 2.83 4.50 4.76 94
TAFB26K115S 115 mm

TA/DV series • DVF Square Flange Blocks
DVF Square Flange Blocks

B.C. C D E F H J M N S Wt.
Part No. Dia. No.
mm mm mm mm mm mm mm mm mm mm mm kg
in. in. in. in. in. in. in. in. in. in. in. lbs.
125.7 65.0 101.6 88.9 117.6 19.1 12 30.7 56.1 50.3 5.0
DVF09K107S 1 7 ⁄ 16 in. 22209 1⁄2
4.95 2.56 4.00 3.50 4.63 0.75 1.21 2.21 1.98 11
DVF09K108S 1 1 ⁄ 2 in. 148.3 65.0 107.8 104.9 136.7 19.1 12 30.7 56.1 50.3 5.0
22209 1⁄2
DVF09K040S 40 mm 5.84 2.56 4.25 4.13 5.38 0.75 1.21 2.21 1.98 11
148.3 70.1 118.4 104.9 136.7 22.4 12 33.5 52.3 55.1 5.5
DVF10K111S 1 11 ⁄ 16 in. 22210 1⁄2
5.84 2.76 4.66 4.13 5.38 0.88 1.32 2.06 2.17 12
DVF10K112S 1 3 ⁄ 4 in. 157.2 70.1 118.4 111.3 143.0 22.4 12 33.5 52.3 55.1 5.5
22210 1⁄2
DVF10K045S 45 mm 6.19 2.76 4.66 4.38 5.63 0.88 1.32 2.06 2.17 12
DVF11K115S 1 15 ⁄ 16 in.
157.2 74.9 121.9 111.3 139.7 22.4 12 35.6 65.0 58.9 5.44
DVF11K200S 2 in. 22211 1⁄2
6.19 2.95 4.80 4.38 5.50 0.88 1.40 2.56 2.32 12
DVF11K050S 50 mm
DVF13K203S 2 3 ⁄ 16 in.
175.0 85.1 137.9 124.0 157.2 25.4 16 39.6 66.8 65.0 6.8
DVF13K204S 2 1 ⁄ 4 in. 22213 5⁄8
6.89 3.35 5.43 4.88 6.19 1.00 1.56 2.63 2.56 15
DVF13K060S 60 mm
DVF15K207S 2 7 ⁄ 16 in.
193.0 98.0 146.0 136.7 168.4 25.4 16 43.9 72.4 72.9 8.2
DVF15K208S 2 1 ⁄ 2 in. 22215 5⁄8
7.60 3.86 5.75 5.38 6.63 1.00 1.73 2.85 2.87 18
DVF15K065S 65 mm
DVF17K215S 2 15 ⁄ 16 in.
215.4 110.0 170.7 152.4 189.0 26.9 20 49.8 77.0 82.0 12.7
DVF17K300S 3 in. 22217 3⁄4
8.48 4.33 6.72 6.00 7.44 1.06 1.96 3.03 3.23 28
DVF17K075S 75 mm
DVF20K307S 3 7 ⁄ 16 in.
251.5 130.0 193.8 177.8 219.2 33.3 20 58.4 84.1 97.0 17.7
DVF20K308S 3 1 ⁄ 2 in. 22220 3⁄4
9.90 5.12 7.63 7.00 8.63 1.31 2.30 3.31 3.82 39
DVF20K090S 90 mm
DVF22K315S 3 15 ⁄ 16 in.
278.4 145.0 215.9 196.9 253.2 38.1 24 63.0 103.1 104.9 24.0
DVF22K400S 4 in. 22222 7⁄8
10.96 5.71 8.50 7.75 9.97 1.50 2.48 4.06 4.13 53
DVF22K100S 100 mm
DVF26K407S 4 7 ⁄ 16 in.
314.5 165.1 263.7 222.3 276.4 38.1 24 71.9 106.9 120.9 34.0
DVF26K408S 4 1 ⁄ 2 in. 22226 7⁄8
12.38 6.50 10.38 8.75 10.88 1.50 2.83 4.21 4.76 75
DVF26K115S 115 mm

TA/DV series • TAFK 9000 SERIES Square Flange Blocks
TAFK 9000 SERIES Square Flange Blocks

B.C. C D E F G(1) (2) (3) H J M N R S Wt.
TAFK11K115S 1 15 ⁄ 16 in.
161.5 74.9 130.3 114.3 149.4 127.00 25.4 16 71.6 72.9 35.6 66.8 12.7 58.9 5.0
TAFK11K200S 2 in. 22211 5⁄8
6.36 2.95 5.13 4.50 5.88 5.000 1.00 2.82 2.87 1.40 2.63 0.50 2.32 11
TAFK11K050S 50 mm
TAFK13K203S 2 3 ⁄ 16 in.
180.8 85.1 146.1 127.8 157.2 138.13 25.4 16 77.7 79.8 39.6 72.4 12.7 65.0 6.4
TAFK13K204S 2 1 ⁄ 4 in. 22213 5⁄8
7.12 3.35 5.75 5.03 6.19 5.438 1.00 3.06 3.14 1.56 2.85 0.50 2.56 14
TAFK13K060S 60 mm
TAFK15K207S 2 7 ⁄ 16 in.
215.9 98.0 168.9 152.7 189.0 160.35 26.9 20 84.8 86.9 43.9 76.2 11.9 72.9 7.7
TAFK15K208S 2 1 ⁄ 2 in. 22215 3⁄4
8.50 3.86 6.65 6.01 7.44 6.313 1.06 3.34 3.42 1.73 3.00 0.47 2.87 17
TAFK15K065S 65 mm
TAFK17K215S 2 15 ⁄ 16 in.
41.3 110.0 193.8 170.7 212.9 187.33 33.3 20 96.3 98.3 49.8 84.1 14.2 82.0 10.4
TAFK17K300S 3 in. 22217 3⁄4
9.50 4.33 7.63 6.72 8.38 7.375 1.31 3.79 3.87 1.96 3.31 0.56 3.23 23
TAFK17K075S 75 mm
TAFK20K307S 3 7 ⁄ 16 in.
298.5 130.0 215.9 211.1 268.2 225.43 38.1 24 114.6 116.6 58.4 103.1 17.5 97.0 15.9
TAFK20K308S 3 1 ⁄ 2 in. 22220 7⁄8
11.75 5.12 8.50 8.31 10.56 8.875 1.50 4.51 4.59 2.30 4.06 0.69 3.82 35
TAFK20K090S 90 mm
TAFK22K315S(4) 3 15 ⁄ 16 in.
327.2 145.0 256.5 163.6 384.3 263.53 38.1 24 117.3 119.4 63.0 106.9 12.4 104.9 24.9
TAFK22K400S(4) 4 in. 22222
12.88(4) 5.71 10.10 6.44(4) 15.13 10.375 1.50 1(4) 4.62 4.70 2.48 4.21 0.49 4.13 55
TAFK22K100S(4) 100 mm
TAFK26K407S(4) 4 7 ⁄ 16 in.
355.6 165.1 284.2 177.8 419.1 284.18 38.1 27 147.3 149.4 71.9 135.1 26.4 120.9 49.0
TAFK26K408S(4) 4 1 ⁄ 2 in. 22226
14.00(4) 6.50 11.19 7.00(4) 16.50 11.188 1.50 1 1 ⁄ 8 (4) 5.80 5.88 2.83 5.32 1.04 4.76 108
TAFK26K115S(4) 115 mm
(1)
(2)
(3)
Six-bolt housing.
(4)

TA/DV series • TAMC Cartridge Blocks
TAMC Cartridge Blocks

A B C D F G M S Wt.
mm mm mm mm mm mm mm mm mm mm mm kg
in. in. in. in. in. in. in. in. in. in. in. lbs.
TAMC11K115S 1 15 ⁄ 16 in.
13.5 23.0 74.9 4.8 115.09 (+0/-0.05) 55.4 63.2 64.5 35.6 58.9 4.5
TAMC11K200S 2 in. 22211
0.530 0.906 2.95 0.188 4.531 (+0/-0.002) 2.18 2.49 2.54 1.40 2.32 10
TAMC11K050S 50 mm
TAMC13K203S 2 3 ⁄ 16 in.
13.5 23.0 85.1 4.8 127.00 (+0/-0.05) 67.1 70.9 72.9 39.6 65.0 5.4
TAMC13K204S 2 1 ⁄ 4 in. 22213
0.530 0.906 3.35 0.188 5.000 (+0/-0.002) 2.64 2.79 2.87 1.56 2.56 12
TAMC13K060S 60 mm
TAMC15K207S 2 7 ⁄ 16 in.
15.1 26.2 98.0 6.4 149.23 (+0/-0.05) 70.6 78.2 80.3 43.9 72.9 8.2
TAMC15K208S 2 1 ⁄ 2 in. 22215
0.594 1.032 3.86 0.250 5.875 (+0/-0.002) 2.78 3.08 3.16 1.73 2.87 18
TAMC15K065S 65 mm
TAMC17K215S 2 15 ⁄ 16 in.
15.1 27.5 110.0 7.1 171.45 (+0/-0.05) 74.9 87.4 89.4 49.8 82.0 11.8
TAMC17K300S 3 in. 22217
0.594 1.083 4.33 0.281 6.750 (+0/-0.002) 2.95 3.44 3.52 1.96 3.23 26
TAMC17K075S 75 mm
TAMC20K307S 3 7 ⁄ 16 in.
19.8 32.5 130.0 8.0 206.38 (+0/-0.05) 85.6 101.3 103.4 58.4 97.0 14.5
TAMC20K308S 3 1 ⁄ 2 in. 22220
0.781 1.281 5.12 0.313 8.125 (+0/-0.002) 3.37 3.99 4.07 2.30 3.82 32
TAMC20K090S 90 mm
TAMC22K315S 3 15 ⁄ 16 in.
19.8 32.5 145.0 8.0 222.25 (+0/-0.08) 97.8 112.0 114.0 63.0 104.9 18.1
TAMC22K400S 4 in. 22222
0.781 1.281 5.71 0.313 8.750 (+0/-0.003) 3.85 4.41 4.49 2.48 4.13 40
TAMC22K100S 100 mm
TAMC26K407S 4 7 ⁄ 16 in.
19.8 38.1 165.1 8.0 265.10 (+0/-0.08) 104.4 124.2 126.2 71.9 120.9 23.6
TAMC26K408S 4 1 ⁄ 2 in. 22226
0.780 1.500 6.50 0.313 10.437 (+0/-0.003) 4.11 4.89 4.97 2.83 4.76 52
TAMC26K115S 115 mm

TAKE-UP FRAMES • QMTF TAKE-UP FRAMES
Take-Up Frames (1)
QMTF Take-Up Frames
No. of
Frame Part Travel Travel
A B D E G H J K L M P S U V W Bolts Wt.
No. Nom. Adj.
Req.
419.1 100.1 698.5 25.4 210.3 101.6 31.8 16 749.3 47.8 31.8 1-5 136.7 143.0 27.216
QMTF12-115 12 5⁄8
– – 2
16.50 3.94 27.50 1.00 8.28 4.00 1.25 29.50 1.88 1.25 ACME 5.38 5.63 60
431.8 106.4 698.5 25.4 220.0 101.6 35.1 16 749.3 50.8 41.4 1.125-5 115.8 150.9 29.484
QMTF12-203 12 5⁄8
– – 2
17.00 4.19 27.50 1.00 8.66 4.00 1.38 29.50 2.00 1.63 ACME 4.56 5.94 65
421.6 111.3 723.9 25.4 233.4 101.6 28.7 20 774.7 54.1 44.5 1.25-5 134.9 166.6 32.205
QMTF12-207 12 3⁄4
– – 2
16.60 4.38 28.50 1.00 9.19 4.00 1.13 30.50 2.13 1.75 ACME 5.31 6.56 71
393.7 129.3 774.7 25.4 272.8 127.0 28.7 16 38.1 825.5 60.5 12.7 1.5-4 165.1 50.8 215.9 49.442
QMTF12-215 12 5⁄8
4
15.50 5.09 30.50 1.00 10.74 5.00 1.13 1.50 32.50 2.38 0.50 ACME 6.50 2.00 8.50 109
393.7 143.0 812.8 28.7 295.4 127.0 26.2 20 38.1 870.0 65.5 25.4 1.75-4 185.7 50.8 233.4 62.596
QMTF12-307 12 3⁄4
4
15.50 5.63 32.00 1.13 11.63 5.00 1.03 1.50 34.25 2.58 1.00 ACME 7.31 2.00 9.19 138
457.2 177.8 914.4 31.8 367.5 152.4 36.6 20 44.5 977.9 75.2 41.4 2-4 190.5 63.5 265.2 86.636
QMTF12-315 12 3⁄4
4
18.00 7.00 36.00 1.25 14.47 6.00 1.44 1.75 38.50 2.96 1.63 ACME 7.50 2.50 10.44 191
574.0 111.3 876.3 25.4 234.2 101.6 26.9 20 927.1 54.1 44.5 1.25-5 139.7 162.6 36.741
QMTF18-207 18 3⁄4
– – 2
22.60 4.38 34.50 1.00 9.22 4.00 1.06 36.50 2.13 1.75 ACME 5.50 6.40 81
546.1 129.3 927.1 25.4 272.8 127.0 28.7 16 38.1 977.9 60.5 12.7 1.5-4 165.1 50.8 215.9 54.431
QMTF18-215 18 5⁄8
4
21.50 5.09 36.50 1.00 10.74 5.00 1.13 1.50 38.50 2.38 0.50 ACME 6.50 2.00 8.50 120
546.1 143.0 965.2 28.7 295.4 127.0 26.2 20 38.1 1022.4 65.5 25.4 1.75-4 185.7 50.8 233.4 70.760
QMTF18-307 18 3⁄4
4
21.50 5.63 38.00 1.13 11.63 5.00 1.03 1.50 40.25 2.58 1.00 ACME 7.31 2.00 9.19 156
609.6 177.8 1066.8 31.8 366.8 152.4 36.6 20 44.5 1130.3 75.2 41.4 2-4 190.5 63.5 265.2 101.150
QMTF18-315 18 3⁄4
4
24.00 7.00 42.00 1.25 14.44 6.00 1.44 1.75 44.50 2.96 1.63 ACME 7.50 2.50 10.44 223
726.4 111.3 1028.7 25.4 233.4 101.6 28.7 20 1079.5 54.1 44.5 1.25-5 115.8 166.6 41.277
QMTF24-207 24 3⁄4
– – 2
28.60 4.38 40.50 1.00 9.19 4.00 1.13 42.50 2.13 1.75 ACME 4.56 6.56 91
698.5 129.3 1079.5 25.4 271.5 127.0 24.6 16 38.1 1130.3 60.5 12.7 1.5-4 165.1 50.8 215.9 63.957
QMTF24-215 24 5⁄8
4
27.50 5.09 42.50 1.00 10.69 5.00 0.97 1.50 44.50 2.38 0.50 ACME 6.50 2.00 8.50 141
698.5 143.0 1117.6 28.7 295.4 127.0 26.2 20 38.1 1174.8 65.5 25.4 1.75-4 185.7 50.8 233.4 81.193
QMTF24-307 24 3⁄4
4
27.50 5.63 44.00 1.13 11.63 5.00 1.03 1.50 46.25 2.58 1.00 ACME 7.31 2.00 9.19 179
762.0 177.8 1219.2 31.8 367.5 152.4 36.6 20 44.5 1282.7 75.2 41.4 2-4 190.5 63.5 265.2 112.940
QMTF24-315 24 3⁄4
4
30.00 7.00 48.00 1.25 14.47 6.00 1.44 1.75 50.50 2.96 1.63 ACME 7.50 2.50 10.44 249
Frame only. Bearing unit must be ordered separately. See pages C-98 (V-Lock), C-125 , C-120 (CL) and C-149 (EC) for information on take-up bearing units.
(1)
NOTE: All take-up frames come with Acme threaded rod.

TAKE-UP FRAMES • QMT Pillow Block Take-Up Frames
QMT Pillow Block Take-Up Frames (1)
Frame Bearing
Travel A B C D E F G H I Wt.
Part No. Size
mm mm mm mm mm mm mm mm mm kg
in. in. in. in. in. in. in. in. in. lbs.
1 7 ⁄ 16 in. – 330.2 187.3 92.1 289.1 41.4 76.2 20 127.0 25.4 11.793
QMT1 X 9 9
2 15 ⁄ 16 in. 13.0 7.375 3.625 11.38 1.63 3.00 3⁄4 5.0 1.0 26
1 7 ⁄ 16 in. – 330.2 187.3 92.1 289.1 41.4 76.2 20 127.0 25.4 13.608
QMT1 X 12 12
2 15 ⁄ 16 in. 13.0 7.375 3.625 11.38 1.63 3.00 3⁄4 5.0 1.0 30
1 7 ⁄ 16 in. – 330.2 187.3 92.1 289.1 41.4 76.2 20 127.0 25.4 16.329
QMT1 X 18 18
2 15 ⁄ 16 in. 13.0 7.375 3.625 11.38 1.63 3.00 3⁄4 5.0 1.0 36
1 7 ⁄ 16 in. – 330.2 187.3 92.1 289.1 41.4 76.2 20 127.0 25.4 19.051
QMT1 X 24 24
2 15 ⁄ 16 in. 13.0 7.375 3.625 11.38 1.63 3.00 3⁄4 5.0 1.0 42
2 15 ⁄ 16 in. – 482.6 311.2 125.4 431.8 50.8 106.4 24 203.2 38.1 33.566
QMT2 X 18 18
4 7 ⁄ 16 in. 19.0 12.25 4.938 17.00 2.00 4.19 1 8.0 1.5 74
2 15 ⁄ 16 in. – 482.6 311.2 125.4 431.8 50.8 106.4 24 203.2 38.1 40.823
QMT2 X 24 24
4 7 ⁄ 16 in. 19.0 12.25 4.938 17.00 2.00 4.19 1 8.0 1.5 90
2 15 ⁄ 16 in. – 482.6 311.2 125.4 431.8 50.8 106.4 24 203.2 38.1 43.545
QMT2 X 36 36
4 7 ⁄ 16 in. 19.0 12.25 4.938 17.00 2.00 4.19 1 8.0 1.5 96
Frame only. Bearing unit must be ordered separately.
(1)
NOTE: All take-up frames come with Acme threaded rod.

INDEX
Index
DVC Piloted Flange Cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . C-163 QVFB and QVVFB Flange Blocks – Tapered Bore Equivalent. . . C-89
DVF Square Flange Blocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-166 QVFC and QVVFC Piloted Flange Cartridges –
DVP Two-Bolt Pillow Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-155 Tapered Adapter Equivalent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-90
DVPF Four-Bolt Pillow Blocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . C-159 QVFK and QVVFK 9000 Series Square Flange Blocks –
Tapered Bore Equivalent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-93
Engineering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-7
QVFL and QVVFL Square Flange Blocks –
QAAFX 5000 Series Flange Blocks . . . . . . . . . . . . . . . . . . . . . . . . C-120 Straight Bore Equivalent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-91
QAAPX 5000 Series Four-Bolt Pillow Blocks. . . . . . . . . . . . . . . . C-111 QVFX and QVVFX 5000 Series Square Flange Blocks –
QAAPXT 5000 Series Two-Bolt Pillow Blocks. . . . . . . . . . . . . . . C-107 Straight Bore Equivalent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-92
QAC and QAAC Piloted Flange Cartridges. . . . . . . . . . . . . . . . . . C-112 QVFY and QVVFY Round Flange Blocks –
QACW and QAACW Piloted Flange Cartridges. . . . . . . . . . . . . . C-114 Straight Bore Equivalent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-94
QAF and QAAF Square Flange Blocks. . . . . . . . . . . . . . . . . . . . . C-116 QVMC and QVVMC Cartridge Blocks –
QAFL and QAAFL Square Flange Blocks. . . . . . . . . . . . . . . . . . . C-118
QVVP Two-Bolt Pillow Blocks – Straight Bore Equivalent. . . . . C-75
QAFY and QAAFY Round Flange Blocks. . . . . . . . . . . . . . . . . . . . C-121
QVVPA SAF Two-Bolt Pillow Blocks –
QAMC and QAAMC Cartridge Blocks . . . . . . . . . . . . . . . . . . . . . C-123 Tapered Bore Equivalent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-77
QAMH and QAAMH Hanger Blocks. . . . . . . . . . . . . . . . . . . . . . . C-127 QVVPF Four-Bolt Pillow Blocks – Straight Bore Equivalent. . . . C-81
QAP and QAAP Two-Bolt Pillow Blocks. . . . . . . . . . . . . . . . . . . . C-101 QVVPG SN-Style Four-Bolt Pillow Blocks
QAPF and QAAPF Four-Bolt Pillow Blocks . . . . . . . . . . . . . . . . . C-108 Tapered Bore Equivalent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-85
QAPL and QAAPL Two-Bolt Pillow Blocks. . . . . . . . . . . . . . . . . . C-103 QVVPH SAF-Style Four-Bolt Pillow Blocks –
QAPR and QAAPR Four-Bolt Pillow Blocks. . . . . . . . . . . . . . . . . C-110 Tapered Bore Equivalent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-86
QASN and QAASN SN-Style Two-Bolt Pillow Blocks – QVVPK 9000 Series Four-Bolt Pillow Blocks –
Pure Metric Design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-105 Tapered Bore Equivalent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-87
QATU and QAATU Take-Up Blocks. . . . . . . . . . . . . . . . . . . . . . . . C-125 QVVPKT 9000 Series Two-Bolt Pillow Blocks –
QMC Piloted Flange Cartridges. . . . . . . . . . . . . . . . . . . . . . . . . . . C-140
QVVPL Two-Bolt Pillow Blocks – Straight Bore Equivalent. . . . C-76
QMCW Piloted Flange Cartridges. . . . . . . . . . . . . . . . . . . . . . . . . C-141
QVVPN SN-Style Two-Bolt Pillow Blocks –
QMF Four-Bolt Square Flange Blocks . . . . . . . . . . . . . . . . . . . . . C-143 Tapered Bore Equivalent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-78
QMFL Four-Bolt Square Flange Blocks . . . . . . . . . . . . . . . . . . . . C-144 QVVPR Four-Bolt Pillow Blocks – Straight Bore Equivalent. . . . C-82
QMFX 5000 Series Square Flange Blocks. . . . . . . . . . . . . . . . . . C-147 QVVPX 5000 Series Four-Bolt Pillow Blocks –
QMFY Round Flange Blocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-145 Straight Bore Equivalent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-83
QMMC Cartridge Blocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-150 QVVPXT 5000 Series Two-Bolt Pillow Blocks –
QMMH Hanger Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-152 Straight Bore Equivalent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-84
QMP Two-Bolt Pillow Blocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-131 QVVSN SN-Style Two-Bolt Pillow Blocks –
Pure Metric Design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-79
QMPF Four-Bolt Pillow Blocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . C-133
QVVTU Take-Up Blocks – Straight Bore Equivalent. . . . . . . . . . . C-98
QMPH/QMPG Four-Bolt Pillow Blocks. . . . . . . . . . . . . . . . . . . . . C-135
Seal and Cover Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-59
QMPL Two-Bolt Pillow Blocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . C-132
Spherical Roller Bearing Solid-Block Housed Units. . . . . . . . . . . C-1
QMPR Four-Bolt Pillow Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . C-134
Spherical Roller Bearing Solid-Block Housed Unit
QMPX 5000 Series Four-Bolt Pillow Blocks. . . . . . . . . . . . . . . . . C-136 Product Data Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-53
QMPXT 5000 Series Two-Bolt Pillow Blocks. . . . . . . . . . . . . . . . C-137 TAFB Square Flange Blocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-165
QMSN SN-Style Two-Bolt Pillow Blocks – TAFC Square Piloted Flange Cartridges. . . . . . . . . . . . . . . . . . . . C-164
Pure Metric Design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-138
TAFK 9000 Series Square Flange Blocks. . . . . . . . . . . . . . . . . . . C-167
QMT Pillow Block Take-Up Frames . . . . . . . . . . . . . . . . . . . . . . . C-170
Take-Up Frames. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-169
QMTF Take-Up Frames. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-169
TAMC Cartridge Blocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-168
QMTU Take-Up Blocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-149
TAPA SAF-Style Two-Bolt Pillow Blocks. . . . . . . . . . . . . . . . . . . C-156
QVC and QVVC Piloted Flange Cartridges –
TAPG SN-Style Four-Bolt Pillow Blocks. . . . . . . . . . . . . . . . . . . . C-162
Straight Bore Equivalent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-95
TAPH SAF-Style Four-Bolt Pillow Blocks. . . . . . . . . . . . . . . . . . . C-161
QVCW and QVVCW Piloted Flange Cartridges –
Straight Bore Equivalent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-96 TAPK 9000 Series Four-Bolt Pillow Blocks . . . . . . . . . . . . . . . . . C-160
QVF and QVVF Square Flange Blocks – TAPKT 9000 Series Two-Bolt Pillow Blocks. . . . . . . . . . . . . . . . . C-158
Straight Bore Equivalent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-88 TAPN SN-Style Two-Bolt Pillow Blocks. . . . . . . . . . . . . . . . . . . . C-157

7-13: 29 Order No. 10591 | Timken is a registered trademark of The Timken Company. | © 2013 The Timken Company | Printed in U.S.A.
®
15M 8-13:
10M
The Timken team applies their know-how to improve the reliability and performance of machinery in diverse www.timken.com
markets worldwide. The company designs, makes and markets high-performance steel as well as mechanical
components, including bearings, gears, chain and related mechanical power transmission products and services.
Price: USD $75

Timken Solid Block HU Catalog

Uploaded by

Document Informationclick to expand document informationTimken Solid Block HU Catalog

Document Informationclick to expand document information

Copyright:

Available Formats

Timken Solid Block HU Catalog

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Timken Solid Block HU Catalog

Uploaded by

Copyright:

Available Formats

Timken® Spherical Roller Bearing Solid-Block Housed Units

TIMKEN® HOUSED UNIT

Ball Bearing Housed Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

TIMKEN® HOUSED UNIT CATALOG 1

GROW STRONGER WITH TIMKEN

We supply products and services that can help keep your

When you choose Timken, you receive more than high-quality

Globally, our 20,000 people provide reliable answers for a wide

2 TIMKEN® HOUSED UNIT CATALOG

INCREASE YOUR EQUIPMENT UPTIME

Additionally, we offer a broad selection of seals, premium

Our 10 technology centers in the United States, Europe and

TIMKEN® HOUSED UNIT CATALOG 3

RUGGED TIMKEN® HOUSED UNITS

4 TIMKEN® HOUSED UNIT CATALOG

TIMKEN® BALL HOUSED UNITS OFFER EASY

TYPICAL INDUSTRIES AND APPLICATIONS

TIMKEN® HOUSED UNIT CATALOG 5

TIMKEN® TYPE E HOUSED UNITS REPEL CONTAMINANTS,

TYPICAL INDUSTRIES AND APPLICATIONS

6 TIMKEN® HOUSED UNIT CATALOG

TIMKEN® SPHERICAL ROLLER BEARING SOLID-BLOCK

TYPICAL INDUSTRIES AND APPLICATIONS

TIMKEN® HOUSED UNIT CATALOG 7

TIMKEN® SAF SPLIT-BLOCK HOUSED UNITS BEAR

TYPICAL INDUSTRIES AND APPLICATIONS

8 TIMKEN® HOUSED UNIT CATALOG

TIMKEN® SNT SPLIT PLUMMER BLOCKS CARRY

TYPICAL INDUSTRIES AND APPLICATIONS

TIMKEN® HOUSED UNIT CATALOG 9

HOW TO USE THIS CATALOG

Updates are made periodically to this catalog. Visit

10 TIMKEN® HOUSED UNIT CATALOG

SHELF LIFE AND STORAGE OF European REACH Compliance

SHELF LIFE POLICY

• Shelf life of the grease-lubricated bearing/component

• The shelf life is a portion of the anticipated aggregate

• Shelf life values, available from Timken, represent a

TIMKEN IS NOT RESPONSIBLE FOR THE SHELF LIFE

TIMKEN® HOUSED UNIT CATALOG 11

• Unless directed otherwise by Timken, products should be

• Do not remove or alter any labels or stencil markings on the

• Products should be stored in such a way that the packaging

• After a product is removed from its packaging, it should be

• When removing a product that is not individually packaged

12 TIMKEN® HOUSED UNIT CATALOG

• Do not use product that has exceeded its shelf life as

• The storage area temperature should be maintained

• The relative humidity should be maintained below 60

• The storage area should be kept free from airborne

• The storage area should be isolated from undue vibration.

TIMKEN® HOUSED UNIT CATALOG 13

Do not use damaged housed units. The use of a damaged

If hammer and bar are used for installation or removal of a

14 TIMKEN® HOUSED UNIT CATALOG

Typical Industries and Applications

Timken® HOUSED UNIT CATALOG C-1