TRANSPORT DIMENSIONS PC 1270 I Impact Crusher PC 1270: Side conveyor belt: Inlet opening: 49” x 28” Construction: sectional steel construction Diameter of rotor: 39.7” Belt width: 25.5” Width of rotor: 47.2” Discharge height: 8’ 7” Rotorequipment: 4 pcs. hammer Drive: hydraulic .
Crushing grade: 1:10 – 1:50
. .
Gap adjustment: hydraulic For transportation the belt can be folded.
Crushing capacity: up to 250 t/h Rotorevoulution: 780 min-1 Crawler unit: Track chain width: 15” . Driving unit: Wheelbase: 10’ 1” . Engine: CAT C11 Design: 3-rib bottom plates Performance: 385 hp Climbing ability: max. 20° . Number of cylinders: 6 cylinders in line Drive: hydraulic Cooling system: water, circulation with pump
Permanent magnetic separator:
Feedhopper: Belt width: 29.5” Construction: Hardox steel Wheelbase: 6’ 5” . Charging volume: appr. 4.5 m³ Drive: hydraulic Charging length: 10’ 11” . Charging width: 7’ 9” . Charging height: 10’ 7” Remote control: The system consists of a receiving set which is mounted on the machine, a wireless transmitting Vibrating chute with pre-screening: set with two accumulators and a charging unit. With the Length without rost: 8’ 2” radio control unit the crawler unit and the vibration chute .
Width: 4’ 1” can be moved.
Length of rost: 36” .
Drive: hydraulic Standard equipment: Dimensions: Straight grid: 2” Working dimensions: or Length: 42’ Zig-Zag grid: 2” Width: 19’ 1” . Height: 10’ 7” .
Main conveyor belt: Transport dimensions:
Construction: sectional steel construction Length: 42’ Belt width: 47.2” Width: 8’ 4” Discharge height: 9’ 2” Height: 10’ 7” Drive: hydraulic Weight: approximately 34 t 74,957 lb
34 t 74,957 lb Transport dimensions 42’ x 8’ 4” x 10’ 7” L x W x H
w w w. m i l t o n c a t . c o m Technical Description All information in this publication is based on the latest product development information which is available at time of printing. Hartl Anlagenbau GmbH reserve all rights on changes at any time and without advance notice, without undertaking any obligation. No part of this publication can be reproduced without written Hopkinton, NH Richmond, VT Scarborough, ME Brewer, ME Milford, MA Wareham, MA Cranston, RI POWERCRUSHER PC 1270 I grant of HARTL Anlagenbau GmbH. CRUSHING & SCREENING 603-746-4611 802-434-4228 207-883-9586 207-989-1890 508-634-3400 508-291-1200 401-946-6350 Last modification: 9-2007 MChartlesheets.1270.qxd 8/21/07 1:48 PM Page 4
® ®
< Impact Crusher PC 1270 < Feedhopper < Main conveyor belt < Crawler unit
Inlet opening: 49” x 28” Construction: Hardox steel Construction: sectional steel construction Track chain width: 15” Diameter of rotor: 39.7” Charging volume: appr. 4.5 m³ Belt width: 47.2” Wheelbase: 10’ 1” Width of rotor: 47.2” Charging length: 10’ 11” Discharge height: 9’ 2” Design: 3-rib bottom plates Rotor equipment: 4 pcs. hammer Charging width: 7’ 9” Drive: hydraulic Climbing ability: max. 20° Crushing grade: 1:10 – 1:50 Charging height: 10’ 7” Drive: hydraulic Gap adjustment: hydraulic Crushing capacity: up to 250 t/h < Permanent magnetic separator Rotorevoulution: 780 min-1 < Vibrating chute with pre-screening Belt width: 29.5” The impact crusher is a high powered machine with a very Length without rost: 8’ 2” Wheelbase: 6’ 5” very high crushing grade. The installed hammers can be Width: 4’ 1” Drive: hydraulic chosen individually depending on the type of crushing ma- Length of rost: 36” terial, so you can reach the best output with the least am- Drive: hydraulic ount of wearing. The hammers can be used on both sides. Standard equipment: Applications: Crushing of rocks, concrete, rubble, asphalt, wood... Straight grid: 2”
or Crawler unit Zig-Zag grid: 2” < Remote control
The system consists of a receiving set which is
mounted on the machine, a wireless transmitting Main conveyor belt & permanent magnetic separator set with two accumulators and a charging unit. With the remote control unit the crawler unit and < Side conveyor belt the vibration chute can be moved.
Construction: sectional steel construction
Belt width: 25.5” Impact Crusher PC 1270 Discharge height: 8’ 7” In the vibrating chute, pre-screening is integrated. The Drive: hydraulic < Driving unit prescreened material from the vibrating chute can be dis- charged to the main conveyor belt or can be dumped with For transportation, the conveyor belt can be folded. Engine: CAT C11 the side conveyor belt of there is one mounted. Performance: 385 hp Number of cylinders: 6 cylinders in line Cooling system: water, circulation with pump
The impact crusher is driven directly with v-belts from
the engine. All other drives, e.g. for the conveyor belts and the crawler unit, work hydraulically. The central hydraulic pump is close coupled to the engine.
