Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

RMG Data Sheet Web Singles

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Kalmar

RMG.
Data sheet.
Technical data
Feature Specification / options Notes

Safe working load (SWL) under


Single 41t / Twin 50t*/ Twin 60t*/ Twin 65t* *Check availability from your Kalmar contact
the spreader

Trolley arrangement Rotating / Low-profile fixed

20-55m
Gantry rail span -
66-164ft

Up to 18m
Cantilever outreach Without lattice structure
Up to 59ft

Hoisting height Up to 1 over 6 -

Rope reeving Max Stable 8-rope stiff reeving

15m*/ 18m
Clearance between legs *With low-profile fixed trolley
49ft* / 59ft

25,3m* / 26,19m - 28,19m Buffers uncompressed, varied as required


Overall length (buffer to buffer)
83ft* / 86ft - 92ft 6in *With low-profile fixed trolley

50 or 60Hz, 3-phase, 4-wire, Typical voltage: 10-20kV


Main power supply
voltage as required Typical transformer size: 1000-1200kVA

Power supply method Cable reel/ busbar* *Check availability from your Kalmar contact

Kalmar / Brieda / Merford / no cabin (remote


Cabin The cabin rotates with the trolley, optionally fixed
control)

All automation levels possible


- factory-installed or retrofit
Intelligent features -
Kalmar Key
Kalmar Insight
Baseline in bold
Metric units primary
North America
ISO Trailers & Swap
Spreader options Pallet wides WTP containers Notes
containers bodies
(48ft, 53ft)

Bromma - fully electric X X* - - -

Check twin availability


Bromma - hydraulic X (also twin) X* - X*
from your Kalmar contact

Piggypack spreader (US type) X - X X -

Piggypack spreader
X X* X - -
(European type)

Baseline in bold
*Optional feature

Trim and micro motion


Range Options
options

Trim ±5° No trim / electric

±250mm / ±250mm / ±5°


Micro motions (headblock) No micro motions / electric / hydraulic
±10in / ±10in / ±5°

Baseline in bold
Metric units primary
Typical performance values Speed options Acceleration / Deceleration

20 / 35 / 45m/min
Hoisting with SWL under spreader 0.35 m/s²
65 / 114 / 147ft/min

40 / 70 / 90m/min
Hoisting with empty spreader 0.50 m/s²
131 / 229 / 295ft/min

60 / 100 / 120 / 150m/min


Trolley travel 0.40 - 0.50 m/s²
197 / 328 / 394 / 492 ft/min

120 / 150m/min
Gantry travel 0.30 - 0.40 m/s²
4,5 / 5,5mph

Trolley rotation 2rpm -

Baseline in bold
Metric units primary

Design classifications
Baseline Optional
(F.E.M)

Crane classification U7/Q2/A7 U8/Q3/A8

Hoist mechanism T7/L2/M7 T8/L3/M8

Trolley traversing mechanism T7/L2/M7 T8/L3/M8

Gantry travelling mechanism T7/L2/M7 T8/L3/M8

Trolley rotation mechanism T5/L2/M5 T6/L3/M6

Classifications varied as required

Gantry rail requirements Baseline Optional

Rail type A100 AS86/A120

Railslope 0,5% Over 0,5% case-by-case

Rail tolerance (ISO 12488-1) Class 1 (installation) / Class 3 (operation) Class 2 / Class 4
Published by Kalmar, part of Cargotec. Copyright © Cargotec 2019.
All rights reserved. No part of this publication may be copied or
reproduced without permission of the copyright owner. The content
of this document is provided “as is”, without warranties of any kind
with regards to its accuracy or reliability and excluding all implied
warranties. We reserve the rights to make changes to any of the
items described in this document without prior notice. The content
of each service and availability of particular services may vary.

You might also like