There are two departments

1- Fans Department
2- Panel Department
BILAL Switchgear Engineering Pvt. Ltd. (formely known as BILAL
ENGINEERING COMPANY) was established in 1978.
As you know that in our country, the weather / environment Disturbs i.e. Cold,
Hot, Dry Hot, Hot Humid are the main factors which disturb the ratio of production
in the Industrial Sector.
We are glad to introduce ourselves in the field of Enviornment & Weather Control
as manufacturer of Cooling & Ventilation Systems. We have left a long list of out
satisfied clients,
in Industrial & Commercial Sectors i.e. Textile, Stitching, Weaving, Knitting Units,
Power Houses, Boiler Houses, Sugar, Cement, Glass, Packages, Plastic, Steel,
Beverages/Food, Fertilizer Industries, CNG Stations, Poultry Forms, Dairies etc.

We have introduced following two advance technologies to control the above

said Weather Disturbs, which increase the production capacity and labour
efficiency.

1) Ventilation System
2) Evaporative Air Cooling System

All above promotes the new reform of Evaporative Air Comforts and contibute to Energy
Saving and Environment Protection.
If you are interested for installation of above systems at your work premises, you may
contact us for any information, we shall be pleased to serve you.

PRODUCT QUALITY & STANDARDS:

BILAL Products meet the National & International Standards. Our products are tailor
made according to specific requirment of our customers.
Before delivery of our products, they must pass through Quality Tests, as following:

i) Noise Testing
ii) Vibration Testing
iii) Rotational Care Performance Testing
iv) Speed of Fan Leaf/Blower Testing
v) Overall Machine Efficiency Testing
vi) High-Performance Test, 400, 220 Volts Special Motor

A complete & satisfactory set of factory Test Reports is prepared before dispatch of
equipments.

AFTER SALE SERVICES & WARRANTY:

The secret of our comaony`s success lies in timely and satisfactorily 24 hours After
Sales Services and 01 (One) Year Mechanical Warranty through our technical experts.

CEO MESSAGE
"Quality" is our watchword on the production line ensuring that the products you
receive are of consistently high standard. We can give you that quality at a price that
represents real value for money. By the Grace of Almighty Allah-Tallah Bilal
Switchgear Engineering (Pvt) Limited have earned the confidence of their valued
customers due to its prompt service & quality products. There is a long list of our
satisfied industrial customers. You can also rely upon us. We shall welcome your
visit to our Factory to discuss your Electrical requirements.

Mr. Muhammad Nazir 

Chief Executive Officer

BOARD OF DIRECTORS/MANAGEMENT 

Mr. Muhammad Nazir            Chief Executive

Mr. Ahmed Bilal                     Director (Procurement & Implementation)

Mr. Ahmed Salman                Director (Business Development)

Mr. Ahmed Imran                  Director (Production & Processing)

Mr. Qasim Nazir                    Director (Sales & Marketing)

 
 THE BEGINNING
BILAL SWITCHGEAR ENGINEERING (PVT) LTD (formely known as BILAL
SWITCHGEAR ENGINEERING COMPANY) was established in 1978.
We have got ISO-9001:2000 Certification in our particular industry. It's over 30 years
company history, the BILAL Switchgear Engineering (PVT) LTD is Pakistan's leading
Engineering Company in design and manufacturing of Medium Voltage & Low
Voltage Electrical Switchgear Cubicles and Distribution Transformers for Industrial
Plants, Commercial Buildings and Domestic Market in Pakistan.

We took start with the manufacturing of Power Distribution Boards and Light Sub-
Distribution Boards. After a successful start, the company started manufacturing of
Low Tension Sub-Station Cubicles in 1982 including ACB Cubicles, Distribution
Cubicles, Bus Tie Duct and Power Factor Improvement Plant.
For the convenience of esteemed clients for one window shopping, the company
started manufacturing of Medium Switchgear Cubicles in 1996 and Distribution
Transformers in 2000. 

 MOST MODERN PRODUCTION FACILITIES, QUALITY & STANDARDS

We, with the blessing of ALLAH Almighty, have a new factory premises equipped
with modern production facilities, vast accommodation, spacious production halls,
skilled manpower and engineering equipements.
All this help us to accelerate the production output, better quality, quick delivery and
efficient services under a healthy and pleasent environment. Our valued clients are
invited to visit our New Factory at RAIWIND ROAD, Lahore by Pre-Appoinment.

BILAL Products meet the National & International Standards like IEC, BSS & ISO-
9001:2000. To verify and ensure the same, all our manufactured products
equipment are checked strictly by Quality Assurance Department. 
All this has brought BILAL in the line of multi-National Switchgear Manufacturing
Companies in the Pakistan.

Strict quality control is maintained throughout the manufacturing process by our

Quality Assurance & Control Department.

 MODERN TESTING FACILITIES

Our products have to pass through chain quality tests before leaving our works. We
affirm our commitment to produce quality equipment with a trouble-free performance
and longer life expectancy through a team of highly qualified and experienced
engineers who supervise all stages of Design, Production and Quality Control. A
Complete set of factory Test Reports is prepared before dispatch of the
equipments. 
  Product Range:-
 HT Panel LT+PFI Panel PFI

MCC PANEL POWER DB AMF PANEL

POWER / DIST
INDUSTRIAL LIGHT LIGHTENING ARRESTER
TRANSFORMER

EVAPORATIVE COOLING INDUSTRIALEVAPORATIVE ELECTRIC WATER

PADS COOLING UNITS COOLER

(DIRECT AXIAL FANS) (DIRECT AXIAL FANS) (DIRECT AXIAL FANS)

HEAVY DUTY DIRECT HEAVY DUTY DIRECT INDUSTRIAL
 DRIVEN VENTILATION DRIVEN VENTILATION BRACKETS &
FANS (Exhaust & Supply) FANS (Exhaust & Supply) PEDESTAL FANS

ENERGY SAVING FANS ENERGY SAVING FANS

HEAVY DUTY BELT HEAVY DUTY BELT
Mist Fan 
DRIVEN VENTILATION DRIVEN INDUSTRIAL
Outdoor Cooling System
FANS SUPPLY FANS
(Exhaust & Supply) (Exhaust & Supply)
 
 

Heavy Duty Direct Driven Ventilation Heavy Duty Direct Industrial Bracket &
Fans Driven Ventilation Fans Pedestal Fans 
(Exhaust & Supply) (Exhaust & Supply) (Direct Axial)

Energy Saving Automatic Louver Belt Driven Fans

Heavy Duty Belt Driven Ventilation Fans Heavy Duty Belt Driven Industrial Supply
(Exhaust & Supply) Fans
 (Roof & Floor Mounting)

Mist Fans (Outdoor Mist Cooling System)

Mobile Type Series  Wall Type Series 

Evaporative cooling is one way to reduce temperature inside the

building. As water evaporates, it absorbs energy from the
surrounding, drops temperature of incoming air from 10 to 20°F
using mists sprays, or wetted pads. It significantly improves working
conditions for labours.

SALIENT FEATURES & MOTIVES FOR PURCHASE OF OUR

COOLING UNITS

Extremely Strong Effect in Dropping Temperature:

In central Pakistan, the temperature can be dropped from 45°C to
30°C with a single Evaporative AIr Cooling unit quickly.

Fine Air Quality: BILAL Evaporative Air Cooling Unit is combination

of different features like ventilation, purification, removing odor,
dropping temperature and improving Oxygen in the Air.
All these features in turn improve working efficiency of labour and
they feel comfortable.
Low Cost, Hige Effect: The total investment on Evaporative Air Cooling Unit is 60% less than
the Central Air Conditioner in the same area.
Low Power Consumption: As compared to traditional Air Conditioner, the unit consumes 60%
less power than the A.C..

High Refrigerating Amount & Powerful Blowing:

Stable Performance, Reliable Quality:

(i) Automatic
(ii) Electronic Control
(iii) Automatic Cleaning Function
(iv) Strong Temperature Dropping
(v) Low Noise
(vi) High Efficiency

Cooling Pads:-
Uses: For lowering indoor air temperature
Evaporative Cooling System lowers air temperature using mists, sprays, or wetted pads by
introducing water. 
The typical evaporative pads system draws outside air into the building through wet vertical
pads.
As air passes through the moist pads surface, some of moisture evaporates and heat is withdrawn
and the temperature of air is lowered down.
The major components of this system are:
1) Pad Media
2) Water Supply Pump 
3) Distribution Pipes 
4) Gutter 
5) Bleed off Line. 
 
CABINET: Made of pre-painted galvanzied sheet or stainless steel for life long durability, specially designed for hot
climate, back side easily removable for cleaning and servicing.
COMPRESSOR: High back pressure Condenser and fan motor slightly of over capacity to ensure efficient and
smooth working in all conditions.
THERMOSTAT: Adjustable from 9°C to 12°C (48°F to 54°F) fitted inside to prevent freezing.
INSTALATION: Moisture proof and highly effictive thermopore.
WATER TANK: Made of 18 guage non-magnetic stainless steel sheet tested of leakage and safety @ 10 kg/cm2
(142 PSI) with recommended maximam working pressure of 5 kg/cm(71PSI).
COPPER PIPE: Rounded to outside of water tank complete system thematically with R134A or R12.
TAPE: Spring loads push button in chromium finish.
DRAIN POT: Made of ABS Plastic, covered with stainless steel tray.

About Technology:-
Basic Concept 
Most loads on an electrical distribution system can be placed in one of three categories:

 Ø       Resistive
 Ø       Inductive 
 Ø       Capacity

The most common of these three on modern systems is the inductive load. Typical examples of
which include transformers, fluorescent lighting and AC induction motors.
The common characteristic of these inductive loads is that they utilize a winding in order to
operate. This winding produces electromagnetic field which allows the motor or transformer to
function and requires a certain amount of electrical power in order to maintain this field.
All inductive loads require two kinds of power to function properly:
1) Active power (kW) – actually performs the work
2) Reactive power (kvar) – sustains the electromagnetic field
One common example of reactive power can be seen in an unloaded AC motor. When all load
is removed from the motor, one might expect the no-load current to drop near zero. In truth,
however, the no-load current will generally show a value between 25% and 30% of full load
current. This is because of the continuous demand for magnetizing current by any induction
load.

Active power is the total power that would be read on a watt meter. Apparent power is the
combination of reactive and active power.

WHAT IS POWER FACTOR?

Power factor is the relationship between working (active) power and total power consumed
(apparent power).
Essentially, power factor is a measurement of how effectively electrical power is being used.
The higher the power factor, the more effectively electrical power is being used and vise versa.
A distribution system’s operating power is composed of two parts: Active (working) power and
Reactive (non-working) magnetizing power. The Active Power performs the useful work ….. the
Reactive Power does not, as its only function is to develop magnetic fields required by inductive
devices.
Generally, power factor decreases (Q increases) with increased motor loads. Therefore, when
more inductive reactive power is needed, more apparent power is also needed. This geometric
relationship of apparent power to Active power is traditionally expected by the right triangle
relationship of:

Cos Ø = P.F. = kW  

                      KVA

WHY IMPROVE LOW POWER FACTOR?

Low power factor means poor electricity efficiency. The lower the power factor, the higher the
apparent power drawn from the distribution network.
When low power factor is not corrected, the utility must provide the non-working reactive power
in addition to the working active power. This results in the use of larger generators,
transformers, bus bars, cables and other distribution system devices, that otherwise would not
be necessary. As the utilities capital expenditure and operating costs are going to be higher,
they are going to pass these higher expenses down the line to industrial users in the form of
power factor penalties.

ADVANTAGES OF IMPOVING LOW POWER FACTOR:

 Ø       High power factor eliminates utility power factor penalties.

 Ø       High power factor reduce the /2R losses of transformers and distribution
equipment.
 Ø       High power factor stabilizes voltage levels.

As the power factor drops from 1.0 to 0.9, power is used less effectively. Therefore, 10% more
current is required than when the power factor was 1.0 to handle the same load.
A power factor of 0.7 requires approximately 43% more current; and a power factor of 0.5
requires approximately 100% (twice as much) as required when the power factor was 1.0 to
handle the same load.

HOW L.V. POWER CAPACITORS SOLVE THE PROBLEM OF LOW POWER FACTOR
Low power factor is a problem that can be solved by adding power factor correction capacitors
to the plant distribution system. As illustrated the power factor correction capacitors work as
reactive current generators “providing” needed reactive power (kvar) into the power supply. By
supplying their own source of reactive power, the industrial user frees the utility from having to
supply it; therefore the total amount of apparent power supplied by the utility will be less.

Power factor correction capacitors reduce the total current drawn from the distribution system
and subsequently increase system capacity by raising the power factor level.

CAPACITOR RATINGS
Power factor correction capacitors are rated in electrical units called “Vars”. Once var is
equivalent to one volt-ampere of reactive power. Vars then are units of measurement for
indicating just how much reactive power the capacitor will supply. As reactive power is usually
measured in thousands of Vars, the letter “k” (abbreviation for “kilo”, meaning thousands)
precedes the var creating the more familiar “kvar” term.
The Capacitor kvar rating then shows how much reactive power the capacitor will supply. Each
unit of the capacitors kvar will decrease the inductive reactive power demand (magnetizing
demand) by the same amount.