Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Specifications: Array Series 4890A, 4891A 4892A, 4892A-90 4893A 4894A, 4894A-90

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

SPECIFICATIONS

ARRAY SERIES 4890A,4891A 4892A,4892A-90 4893A 4894A,4894A-90

Frequency Response (±3 dB)1: 70 Hz - 18 kHz 50 Hz - 18 kHz 38 Hz - 400 Hz 46 Hz - 18 kHz


Sensitivity: 98 dB (1 W, 1m) 98 dB (1 W, 1m) 98 dB (1 W, 1m) 100 dB (1 W, 1m)
Recommended Amplifier Power 2:
High Frequency: 300 W at 8 ohms 300 W at 8 ohms N/A 300 W at 8 ohms
Low Frequency: 600 W at 8 ohms 600 W at 8 ohms 600 W at 8 ohms each transducer, 1200 W total 600 W at 8 ohms each transducer (x2)
Nominal Coverage: 4890A: 60° horizontal, 40° vertical or 40° horizontal, 60° vertical 4892A: 45° horizontal, 35° vertical Array Dependent 4894A: 45° horizontal, 35° vertical
4891A: 60° horizontal, 40° vertical 4892A-90: 90° horizontal, 35° vertical 4894A-90: 90° horizontal, 35° vertical
LOW FREQUENCY TRANSDUCERS:
Nominal Diameter: 355 mm (14 in) 355 mm (14 in) (Two) 355 mm (14 in) (Two) 355 mm (14 in)
Nominal Impedance: 8 ohms 8 ohms Two Transducers with separate pinouts, 8 ohms each Two Transducers with separate pinouts, 8 ohms each
Power Rating: 600 W AES, 50 Hz to 500 Hz, 2400 W peak 600 W AES, 50 Hz to 500 Hz, 2400 W peak 600 W AES, each transducer 50 Hz to 500 Hz, 600 W AES, 50 Hz to 500 Hz, 2400 W peak
1200 W AES total system; 2400 W peak each 1200 W AES total system; 2400 W peak each
transducer, 4800 W peak total system transducer, 4800 W peak total system
HIGH FREQUENCY TRANSDUCER:
Throat Diameter: 38 mm (1 1/2 in) exit 38 mm (1 1/2 in) exit N/A 38 mm (1 1/2 in) exit
Nominal Impedance: 8 ohms 8 ohms N/A 8 ohms
Power Rating: 75 W AES, 1 kHz to 10 kHz, 300 W peak 75 W AES, 1 kHz to 10 kHz, 300 W peak N/A 75 W AES, 1 kHz to 10 kHz, 300 W peak
HIGH FREQUENCY HORN:
Type: Optimized Aperture Flat-Front Bi-Radial®, die cast aluminum Optimized Aperture Flat-Front Bi-Radial® N/A Optimized Aperture Flat-Front Bi-Radial®
ENCLOSURE:
Flying System: None S.A.F.E. - JBL proprietary, modular, certified S.A.F.E. - JBL proprietary, modular, certified S.A.F.E. - JBL proprietary, modular, certified
Finish: DuraFlex™ Black Textured Paint DuraFlex™ Black Textured Paint DuraFlex™ Black Textured Paint DuraFlex™ Black Textured Paint
Grille: 16 ga. perforated steel, foam backed 16 ga. perforated steel, foam backed 16 ga. perforated steel, foam backed 16 ga. perforated steel, foam backed
Dimensions H x W x D: 4890A: 376 x 686 x 376 mm (14.8 x 27 x 14.8 in) 628 x 394 x 362 mm (24 3/4 x 15 1/2 x 14 1/4 in) 1066 x 394 x 362 mm (42 x 15 1/2 x 14 1/4 in) 1066 x 394 x 362 mm (42 x 15 1/2 x 14 1/4 in)
4891A: 470 x 394 x 559 mm (18.5 x 15.5 x 22 in)
1 Halfspace measurement
2 Recommended Power Amplifier ratings are a guide for amplifier selection considering normal program material and line voltage available to amplifiers, although lower power amplifiers may be utilized. The Array Series systems are capable of greater peak power input.

ARRAY SERIES CONTROLLERS DSC260 DSC280

Frequency Response 1: 20 Hz - 20 kHz (<+/- 0.5 dB) 15 Hz - 20 kHz ±0.25 dB

Configuration: Mono 4, 5 and 6-way 2 Channels; 1, 2, 3, 4-way out

Inputs (Balanced): 2 Channels, +20 dBu max level 10 kOhms Analog: 2 Ch, Max level +20 dBu, Pin 2+

Electronically balanced XLR connectors Digital Option, AES/EBU

Outputs (Balanced): 6 Channels, +10 dBu into 600 Ohms max level Electronically 8 Bands, Max level 20 dBu, Pin 2+

balanced XLR connectors

Front Panel Controls: Mute for each output band, Function, Parameter, Memory Mute for each output band, Function, Parameter, Memory

Rear Panel Controls: AC voltage selection, +10 dB input switch

Display: 2 x16 character backlit LCD LEDS for; meters, mute, switch enable, LCD screen for programming functions

Dynamic Range: >100 dB >105 dB

Total Harmonic Distortion: <0.05%, 20 Hz-20 kHz, @+10 dBu <.001%, 20- 20 kHz, @ +10 dBu

Nominal Gain: -10 dB 0 dB (Unity Gain)

Limiters: User adjustable threshold User adjustable threshold

Sampling Rate: 46.875 kHz 48 kHz

Input/Output Converters: 20 bit 20 bit

Crossover Frequency: 1 kHz 1 kHz

Dimensions (H x W x D): 44.4 x 483 x 203 mm (1.75 x 19 x 8 in) 89 x 483 x 357 mm (3.5 x 19 x 14 in)

Weight: 2.8 kg (6.2 lbs) 6.8 kg (15 lbs)


1 Equalization, infrasonic filters disabled
For detailed technical and architectural specifications, contact JBL Professional.

JBL Professional
8500 Balboa Boulevard, Northridge, CA 91329
(818) 894-8850
www.jblpro.com CAT ARRAY 2000
2/00/15M
©2000 JBL Professional

See more at http://safe-manuals.com


The Array Series: Loudspeaker Systems That Reaffirm JBL’s Commitment To Total Engineering.
The Array Series Solution: The Sum Of Its Parts 60% compared to competitive products, allowing
Array Series systems to deliver higher sound
Upgraded Enclosures Now
A Compact, Flexible Feature DuraFlex™ 13-ply, 19 mm (3/4 in) void-free, cross-grain hardwood construction for maximum
Low Frequency Transducers pressure levels at full dynamic range. durability in fixed or portable applications.
Long term enclosure durability is assured by
System For Professionals For Array Series, JBL engineers developed A glass fiber/paper composite cone is used
13-ply birch hardwood construction, proven
100 mm (4 in) pure titanium diaphragm features JBL’s patented diamond sur-
round to reduce membrane stresses in the support structure. Aquaplas damping
the first-ever neodymium-based pro audio low to achieve a greater stiffness-to-weight ratio. reduces break-up modes and smoothes overall response.
Array Series is an optimized system which joinery techniques and JBL’s rugged DuraFlex™
frequency transducer. This 335 mm (14 in.) The new cone formulation, along with its ribbed- VGC™ (Vented Gap Cooling) uses normal cone excursion to force air across the
combines precision engineered transducers exterior coating. Structural integrity is enhanced voice coil for maximum heat dissipation, resulting in higher power handling and
device features an advanced magnet structure, wall geometry, greatly reduces distortion by
and advanced control technology for a level by internal steel braces which double as attach- reduced power compression.
used for high flux density and low overall minimizing cone break-up.
of performance second to none. Since its ment points for S.A.F.E.™ flying hardware Dual shorting rings, aluminum and copper, greatly reduce 2nd and 3rd order
weight. Harmonic distortion is reduced through harmonic distortion.
introduction these system products have found accessories. The enclosure’s sidewalls taper at
the use of dual shorting rings High Frequency Compression Driver 22.5° angles, matching horn coverage angles
Neodymium magnet structure for light weight and high flux density. Black motor
structure is pressed into diecast aluminum frame which acts as heatsink for
favor around the world in a wide variety of (one aluminum and the Array Series products use a 38 mm (1 1/2 in.) for effective array construction. effective convection cooling.
applications: musical theater, concert audio, other copper). Linearity is exit compression driver that features a For easy transport, two comfortable handles Large diameter vents prevent compression for linear output during high SPL
corporate A/V rental work, dance music club maintained, even at high- usage.
neodymium magnet assembly for maximum are installed on the side walls. The 4892A
installations and broadcast/film special event excursion extremes, with Integral steel braces accept S.A.F.E.™ (Secure Array Flying Hardware) for quick,
magnetic energy and minimal weight. A damped features a 35 mm (1 3/8 in.) pole mount cup safe rigging.
support, to name but a few. the use of a 100 mm 100 mm (4 in.) diameter pure titanium on the bottom surface, for use with Tripod
(4 in.) diameter edgewound diaphragm is positioned over JBL’s Coherent Speaker Stands. The grille is 16 gauge perforated
Optimized System Engineering aluminum ribbon voice coil. The audible result Wave™ phasing plug for phase-correct and user convenience available only in the clusters quickly and with absolute safety.
steel, lined with open-cell reticulate foam to pro-
To optimize transducer integration, JBL is absolute clarity and definition in the summing at the exit throat. digital domain. Either choice will provide Designed, engineered and certified with a
tect against moisture damage and dust. Input is
engineers turned to advanced signal processing bass/low mid frequency region. superior, high level sound quality. 6:1 safety factor, S.A.F.E. flying hardware
through two paralleled 8-pole Speakon™
technology to assure smooth response and JBL’s exclusive VGC™ (Vented Gap Cooling) Optimized Aperture™ Bi-RadiaI© Horns easily meets and
connectors, which access each transducer
phase integrity. Crossover filters, transducer technology is part of an optimized Thermal DSC280 exceeds the most
To achieve smooth, even dispersion at low component individually.
alignment, system equalization and protective Management System which makes efficient use stringent safety
distortion in both the horizontal and vertical
limiting are implemented to be completely of both forced air and convective cooling.
planes, Optimized Aperture Flat-Front Bi-Radial Advanced Control Electronics requirements for
transparent, allowing the transducers to Convection cooling is maximized by encasing sound system rig-
horns were developed for Array Series systems. Sophisticated control electronics allow
perform to their maximum potential. Available the compact, powerful neodymium magnet ging. A complete
The family includes a 45° model with a uniform, Array Series transducers to perform to their
digital controllers offer the user a choice of within the diecast aluminum frame, engineered DSC260
narrow coverage pattern segment that combines maximum capability. Careful consideration line of hardware is
features and performance to complement any to act as a large, efficient heatsink. This design available to allow
well in arrays. 60° and 90° horns provide has been given to the overall circuit topology
installation or portable touring system. reduces thermal compression by as much as cluster construction
accurate, consistent coverage of crossover filters, transducer alignment,
125
for non-arraying applications. system equalization and protective limiting. for any
Low Frequency Transducer: Maximum Continuous SPL JBL 1400PRO
Competition 120
The optimized Thermal Management System magnet structure 115 The DSC26O provides cost-effective S.A.F.E.™ Flying Hardware appli-
dB SPL

substantially increases continuous power handling for greater 110 signal processing with simple setup. The An important aspect of Array Series is cation.
total acoustic output and dynamic range compared to conven- 105 DSC28O offers additional precision, flexibility the ability to assemble loudspeaker
tional designs. 1 10 100 200 400 600
100
800

There’s An Array System


Designed For The
Only Application
That Matters- Yours.
4890A,4891A 4892A,4892A-90 4894A,4894A-90 4893A
Two-Way Single 355 mm (14 in) Two-Way Single 355 mm (14 in) Two-Way Dual 355 mm (14 in) Dual 355 mm (14 in)
Full Range System Full Range System Full Range System Subwoofer System
These stage monitors use two configurations; These compact packages exhibit outstanding In situations where greater low energy is Delivers sub-bass support for the Array
vertical format for minimal footprint, and hori- full range output and are capable of very high sound required, the 4894A and 4894A-90 deliver. Series full range systems. Its compact,
zontal for minimal height to allow unobtrusive pressure levels. Both deliver impressive performance, the 4892A as a They are the ideal system choice for outdoor solidly constructed enclosure houses two
presence on stage. A 600 x 400 horn that dedicated array component and the 4892A-90 for single system and larger venue applications where maximum advanced VGC low frequency transducers
rotates in the 4890A and 45° cabinet angles applications. A 35 mm (1 3/8 in) pole mount adapter is standard. sound pressure level is required without for tight, solid and dynamic bass.
provide optimum coverage for any application. compromising fidelity. The 4894A can be used
Linear response at high level satisfies even the as an array element and for side fill applications.
most demanding artist. The 4892A, 4893A, & 4894A can be arrayed together making it The 4894A-90 provides wider coverage from a
possible to custom tailor clusters for virtually any desired coverage. single enclosure.
See more at http://safe-manuals.com

You might also like