Load Bearing Wall Members SigmaStud® Product Profile

Important Notes
1. Section properties and capacities are calculated in accordance with
AISI S100-16 Specification. 3.5-4" Depths
2. Tabulated gross properties are based on the full-unreduced cross (flat web configuration)
section of the studs, away from punchouts.
3. Effective section properties incorporate the strength increase from the
cold- work of forming as applicable per AISI S100-16 Spec, Sec. A3.3.2 (3).
4. Net effective section properties are calculated at a cross section
through the punchout.
5. Allowable moment is the lesser of Mal and Mad. Stud distortional
buckling is based on an assumed k = 0.
6. For deflection calculations, use the effective moment of inertia.
7. The effective moment of inertia for deflection is calculated at a stress which results in a section modulus such that the stress
times the section modulus at that stress is equal to the allowable moment. AISI S100-16 Specification Procedure I for serviceability
determination has been used.
®
SigmaStud Product Profile: 3.5” - 4” Stud Depths
Overall Flange Web Web Return Return Inside Bend Design
Web Flat Web Inside
Section Depth Width Return Return Lip 1 Lip 2 Radius Thickness Unit Weight
(All 50 ksi) D B A C E N d1 d2 R t
(in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (lb/ft)
350SG200-33 3.5 2 3.5 N/A N/A N/A 0.5892 0.5 0.105 0.0346 1.078
350SG200-43 3.5 2 3.5 N/A N/A N/A 0.6102 0.5 0.105 0.0451 1.400
350SG200-54 3.5 2 3.5 N/A N/A N/A 0.6332 0.5 0.105 0.0566 1.749
350SG200-68 3.5 2 3.5 N/A N/A N/A 0.6626 0.5 0.105 0.0713 2.192
350SG200-97 3.5 2 3.5 N/A N/A N/A 0.7234 0.5 0.105 0.1017 3.092
350SG250-33 3.5 2.5 3.5 N/A N/A N/A 0.5892 0.5 0.105 0.0346 1.196
350SG250-43 3.5 2.5 3.5 N/A N/A N/A 0.6102 0.5 0.105 0.0451 1.553
350SG250-54 3.5 2.5 3.5 N/A N/A N/A 0.6332 0.5 0.105 0.0566 1.942
350SG250-68 3.5 2.5 3.5 N/A N/A N/A 0.6626 0.5 0.105 0.0713 2.435
350SG250-97 3.5 2.5 3.5 N/A N/A N/A 0.7234 0.5 0.105 0.1017 3.438
350SG350-68 3.5 3.5 3.5 N/A N/A N/A 0.6626 0.5 0.105 0.0713 2.920
362SG200-33 3.625 2 3.625 N/A N/A N/A 0.5892 0.5 0.105 0.0346 1.093
362SG200-43 3.625 2 3.625 N/A N/A N/A 0.6102 0.5 0.105 0.0451 1.419
362SG200-54 3.625 2 3.625 N/A N/A N/A 0.6332 0.5 0.105 0.0566 1.773
362SG200-68 3.625 2 3.625 N/A N/A N/A 0.6626 0.5 0.105 0.0713 2.222
362SG200-97 3.625 2 3.625 N/A N/A N/A 0.7234 0.5 0.105 0.1017 3.135
362SG250-33 3.625 2.5 3.625 N/A N/A N/A 0.5892 0.5 0.105 0.0346 1.210
362SG250-43 3.625 2.5 3.625 N/A N/A N/A 0.6102 0.5 0.105 0.0451 1.572
362SG250-54 3.625 2.5 3.625 N/A N/A N/A 0.6332 0.5 0.105 0.0566 1.966
362SG250-68 3.625 2.5 3.625 N/A N/A N/A 0.6626 0.5 0.105 0.0713 2.465
362SG250-97 3.625 2.5 3.625 N/A N/A N/A 0.7234 0.5 0.105 0.1017 3.481
362SG350-68 3.625 3.5 3.625 N/A N/A N/A 0.6626 0.5 0.105 0.0713 2.950
400SG200-33 4 2 4 N/A N/A N/A 0.5892 0.5 0.105 0.0346 1.137
400SG200-43 4 2 4 N/A N/A N/A 0.6102 0.5 0.105 0.0451 1.477
400SG200-54 4 2 4 N/A N/A N/A 0.6332 0.5 0.105 0.0566 1.846
400SG200-68 4 2 4 N/A N/A N/A 0.6626 0.5 0.105 0.0713 2.313
400SG200-97 4 2 4 N/A N/A N/A 0.7234 0.5 0.105 0.1017 3.265
400SG250-33 4 2.5 4 N/A N/A N/A 0.5892 0.5 0.105 0.0346 1.255
400SG250-43 4 2.5 4 N/A N/A N/A 0.6102 0.5 0.105 0.0451 1.630
400SG250-54 4 2.5 4 N/A N/A N/A 0.6332 0.5 0.105 0.0566 2.038
400SG250-68 4 2.5 4 N/A N/A N/A 0.6626 0.5 0.105 0.0713 2.556
400SG250-97 4 2.5 4 N/A N/A N/A 0.7234 0.5 0.105 0.1017 3.611
400SG350-68 4 3.5 4 N/A N/A N/A 0.6626 0.5 0.105 0.0713 3.041
400SG350-97 4 3.5 4 N/A N/A N/A 0.7234 0.5 0.105 0.1017 4.303
400SG350-118 4 3.5 4 N/A N/A N/A 0.7684 0.5 0.105 0.1242 5.216

Page 3 | Load Bearing Wall Members www.steelnetwork.com | 1-888-474-4876 032020 | The Steel Network, Inc.
Load Bearing Wall Members SigmaStud® Product Profile
Important Notes
1. Section properties and capacities are calculated in accordance with AISI
S100-16 Specification. 5.5-8" Depths
2. Tabulated gross properties are based on the full-unreduced cross section (bent web configuration)
of the studs, away from punchouts.
3. Effective section properties incorporate the strength increase from the
cold-work of forming as applicable per AISI S100-16 Spec, Sec. A3.3.2 (3).
4. Net effective section properties are calculated at a cross section through
the punchout.
5. Allowable moment is the lesser of Mal and Mad. Stud distortional buckling
is based on an assumed k = 0.
6. For deflection calculations, use the effective moment of inertia.
7. The effective moment of inertia for deflection is calculated at a stress
which results in a section modulus such that the stress times the section modulus at that stress is equal to the allowable moment.
AISI S100-16 Specification Procedure I for serviceability determination has been used.
®
SigmaStud Product Profile: 5.5” - 8” Stud Depths 5.5” - 8”
Overall Flange Web Web Return Return Inside Bend Design
Web Flat Web Inside
Section Depth Width Return Return Lip 1 Lip 2 Radius Thickness Unit Weight
(All 50 ksi) D B A C E N d1 d2 R t
(in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (lb/ft)
550SG162-33 5.5 1.625 1 1 0.625 2.25 0.5 0 0.105 0.0346 1.232
550SG162-43 5.5 1.625 1 1 0.625 2.25 0.5 0 0.105 0.0451 1.598
550SG200-33 5.5 2 1 1 0.625 2.25 0.5892 0.5 0.105 0.0346 1.438
550SG200-43 5.5 2 1 1 0.625 2.25 0.6102 0.5 0.105 0.0451 1.869
550SG200-54 5.5 2 1 1 0.625 2.25 0.6332 0.5 0.105 0.0566 2.338
550SG200-68 5.5 2 1 1 0.625 2.25 0.6626 0.5 0.105 0.0713 2.933
550SG200-97 5.5 2 1 1 0.625 2.25 0.7234 0.5 0.105 0.1017 4.147
550SG250-33 5.5 2.5 1 1 0.625 2.25 0.5892 0.5 0.105 0.0346 1.556
550SG250-43 5.5 2.5 1 1 0.625 2.25 0.6102 0.5 0.105 0.0451 2.023
550SG250-54 5.5 2.5 1 1 0.625 2.25 0.6332 0.5 0.105 0.0566 2.531
550SG250-68 5.5 2.5 1 1 0.625 2.25 0.6626 0.5 0.105 0.0713 3.176
550SG250-97 5.5 2.5 1 1 0.625 2.25 0.7234 0.5 0.105 0.1017 4.493
550SG300-43 5.5 3 1 1 0.625 2.25 0.6102 0.5 0.105 0.0451 2.176
550SG300-54 5.5 3 1 1 0.625 2.25 0.6332 0.5 0.105 0.0566 2.723
550SG300-68 5.5 3 1 1 0.625 2.25 0.6626 0.5 0.105 0.0713 3.418
550SG300-97 5.5 3 1 1 0.625 2.25 0.7234 0.5 0.105 0.1017 4.839
550SG300-118 5.5 3 1 1 0.625 2.25 0.7684 0.5 0.105 0.1242 5.867
600SG162-33 6 1.625 1.25 1 0.625 2.25 0.5 0 0.105 0.0346 1.291
600SG162-43 6 1.625 1.25 1 0.625 2.25 0.5 0 0.105 0.0451 1.674
600SG200-33 6 2 1.25 1 0.625 2.25 0.5892 0.5 0.105 0.0346 1.497
600SG200-43 6 2 1.25 1 0.625 2.25 0.6102 0.5 0.105 0.0451 1.946
600SG200-54 6 2 1.25 1 0.625 2.25 0.6332 0.5 0.105 0.0566 2.435
600SG200-68 6 2 1.25 1 0.625 2.25 0.6626 0.5 0.105 0.0713 3.054
600SG200-97 6 2 1.25 1 0.625 2.25 0.7234 0.5 0.105 0.1017 4.320
600SG250-33 6 2.5 1.25 1 0.625 2.25 0.5892 0.5 0.105 0.0346 1.615
600SG250-43 6 2.5 1.25 1 0.625 2.25 0.6102 0.5 0.105 0.0451 2.100
600SG250-54 6 2.5 1.25 1 0.625 2.25 0.6332 0.5 0.105 0.0566 2.627
600SG250-68 6 2.5 1.25 1 0.625 2.25 0.6626 0.5 0.105 0.0713 3.297
600SG250-97 6 2.5 1.25 1 0.625 2.25 0.7234 0.5 0.105 0.1017 4.666
600SG300-43 6 3 1.25 1 0.625 2.25 0.6102 0.5 0.105 0.0451 2.253
600SG300-54 6 3 1.25 1 0.625 2.25 0.6332 0.5 0.105 0.0566 2.820
600SG300-68 6 3 1.25 1 0.625 2.25 0.6626 0.5 0.105 0.0713 3.540
600SG300-97 6 3 1.25 1 0.625 2.25 0.7234 0.5 0.105 0.1017 5.012
600SG300-118 6 3 1.25 1 0.625 2.25 0.7684 0.5 0.105 0.1242 6.078
800SG162-33 8 1.625 2.25 1 0.625 2.25 0.5 0 0.105 0.0346 1.526
800SG162-43 8 1.625 2.25 1 0.625 2.25 0.5 0 0.105 0.0451 1.981
800SG200-33 8 2 2.25 1 0.625 2.25 0.5892 0.5 0.105 0.0346 1.733
800SG200-43 8 2 2.25 1 0.625 2.25 0.6102 0.5 0.105 0.0451 2.253
800SG200-54 8 2 2.25 1 0.625 2.25 0.6332 0.5 0.105 0.0566 2.820
800SG200-68 8 2 2.25 1 0.625 2.25 0.6626 0.5 0.105 0.0713 3.540
800SG200-97 8 2 2.25 1 0.625 2.25 0.7234 0.5 0.105 0.1017 5.012
800SG250-33 8 2.5 2.25 1 0.625 2.25 0.5892 0.5 0.105 0.0346 1.851
800SG250-43 8 2.5 2.25 1 0.625 2.25 0.6102 0.5 0.105 0.0451 2.406
800SG250-54 8 2.5 2.25 1 0.625 2.25 0.6332 0.5 0.105 0.0566 3.012
800SG250-68 8 2.5 2.25 1 0.625 2.25 0.6626 0.5 0.105 0.0713 3.782
800SG250-97 8 2.5 2.25 1 0.625 2.25 0.7234 0.5 0.105 0.1017 5.358
800SG300-43 8 3 2.25 1 0.625 2.25 0.6102 0.5 0.105 0.0451 2.560
800SG300-54 8 3 2.25 1 0.625 2.25 0.6332 0.5 0.105 0.0566 3.205
800SG300-68 8 3 2.25 1 0.625 2.25 0.6626 0.5 0.105 0.0713 4.025
800SG300-97 8 3 2.25 1 0.625 2.25 0.7234 0.5 0.105 0.1017 5.704
800SG300-118 8 3 2.25 1 0.625 2.25 0.7684 0.5 0.105 0.1242 6.922

The Steel Network, Inc. | 032020 www.steelnetwork.com | 1-888-474-4876 Load Bearing Wall Members | Page 4
Load Bearing Wall Members SigmaStud® Section Properties
Important Notes
1. Section properties and capacities are calculated in accordance with AISI S100-16 Spec, "North American Specification for the Design
of Cold-Formed Steel Structural Members".
2. Tabulated gross properties are based on the full-unreduced cross section of the studs, away from punchouts.
3. Effective section properties incorporate the strength increase from the cold-work of forming as applicable per AISI S100-16 Spec,
Sec. A3.3.2 (3).
4. Allowable moment is the lesser of Mal and Mad. Stud distortional buckling is based on an assumed k = 0.
5. For deflection calculations, use the effective moment of inertia.
6. The effective moment of inertia for deflection is calculated at a stress which results in a section modulus such that the stress times the
section modulus at that stress is equal to the allowable moment. AISI S100-16 Procedure I for serviceability determination has been used.
®
SigmaStud Section Properties
Gross Properties Torsional Properties Effective Properties 50 ksi
Section
Area Ix Sx Rx Iy Ry Jx10 3
Cw Xo m Xo Ae (net) Ixe Sxe Sxe (net) Mal Mal (net) Mad Mad (net) Va Va (net)
(All 50 ksi) ß
(in )
2
(in ) 4
(in )
3
(in) (in ) 4
(in) (in )
4
(in )
6
(in) (in) (in) (in )2
(in )
4
(in )
3
(in ) (in-k) (in-k) (in-k) (in-k) (lbs) (lbs)
3

350SG200-33 0.317 0.630 0.360 1.410 0.194 0.782 0.126 0.718 -1.975 1.178 2.549 0.400 0.201 0.615 0.310 0.283 9.295 8.479 8.570 8.332 1144 527
350SG200-43 0.411 0.810 0.463 1.404 0.249 0.779 0.279 0.929 -1.969 1.176 2.541 0.399 0.293 0.810 0.430 0.406 12.878 12.161 12.176 11.825 2141 747
350SG200-54 0.514 1.003 0.573 1.397 0.309 0.775 0.549 1.158 -1.963 1.173 2.531 0.398 0.384 1.003 0.550 0.530 16.470 15.871 16.295 15.825 3371 925
350SG200-68 0.644 1.241 0.709 1.388 0.382 0.770 1.091 1.444 -1.955 1.169 2.519 0.397 0.529 1.241 0.709 0.696 23.531 20.831 23.373 20.636 4208 900
350SG200-97 0.909 1.705 0.974 1.370 0.525 0.760 3.132 2.017 -1.938 1.160 2.492 0.395 0.756 1.705 0.974 0.958 33.387 32.831 33.387 32.827 5886 850
350SG250-33 0.351 0.734 0.419 1.445 0.329 0.967 0.140 1.206 -2.476 1.448 3.025 0.330 0.210 0.693 0.331 0.300 9.904 8.995 9.106 8.870 1144 527
350SG250-43 0.456 0.945 0.540 1.439 0.424 0.964 0.309 1.565 -2.471 1.445 3.017 0.329 0.292 0.933 0.447 0.418 13.371 12.505 13.045 12.687 2141 747
350SG250-54 0.571 1.171 0.669 1.432 0.526 0.960 0.609 1.953 -2.465 1.442 3.008 0.329 0.383 1.171 0.571 0.545 17.099 16.324 17.616 17.120 3371 925
350SG250-68 0.715 1.450 0.829 1.424 0.653 0.955 1.212 2.443 -2.457 1.439 2.996 0.328 0.519 1.450 0.748 0.728 22.400 21.809 23.676 23.014 4208 900
350SG250-97 1.010 1.999 1.142 1.406 0.904 0.946 3.483 3.431 -2.441 1.430 2.972 0.325 0.835 1.999 1.125 1.107 37.597 37.006 38.177 37.438 5886 850
350SG350-68 0.858 1.870 1.068 1.476 1.471 1.309 1.454 5.401 -3.456 1.965 3.980 0.246 0.535 1.812 0.804 0.774 24.073 23.179 26.651 25.932 4208 900
362SG200-33 0.321 0.683 0.377 1.459 0.196 0.782 0.128 0.759 -1.954 1.168 2.561 0.418 0.202 0.668 0.326 0.295 9.754 8.842 8.919 8.673 1102 544
362SG200-43 0.417 0.879 0.485 1.452 0.253 0.779 0.283 0.983 -1.948 1.166 2.552 0.417 0.293 0.879 0.451 0.424 13.504 12.690 12.685 12.320 2141 802
362SG200-54 0.521 1.089 0.601 1.445 0.313 0.775 0.556 1.224 -1.942 1.163 2.542 0.416 0.385 1.089 0.577 0.553 17.261 16.571 16.994 16.504 3372 994
362SG200-68 0.653 1.348 0.744 1.437 0.388 0.770 1.107 1.526 -1.934 1.159 2.530 0.415 0.532 1.348 0.744 0.728 24.678 21.799 24.401 21.653 4375 1007
362SG200-97 0.921 1.854 1.023 1.419 0.533 0.761 3.176 2.130 -1.918 1.150 2.504 0.413 0.769 1.854 1.023 1.007 35.050 34.514 35.050 34.509 6124 954
362SG250-33 0.356 0.795 0.438 1.495 0.333 0.968 0.142 1.277 -2.453 1.437 3.031 0.345 0.210 0.751 0.347 0.313 10.387 9.375 9.461 9.217 1102 544
362SG250-43 0.462 1.024 0.565 1.489 0.430 0.964 0.313 1.656 -2.447 1.435 3.023 0.344 0.293 1.011 0.468 0.435 14.012 13.038 13.565 13.194 2141 802
362SG250-54 0.578 1.269 0.700 1.482 0.533 0.961 0.617 2.066 -2.442 1.432 3.014 0.344 0.385 1.269 0.598 0.569 17.908 17.031 18.335 17.821 3372 994
362SG250-68 0.724 1.573 0.868 1.474 0.662 0.956 1.227 2.583 -2.434 1.428 3.002 0.342 0.522 1.573 0.783 0.761 23.449 22.775 24.670 23.982 4375 1007
362SG250-97 1.023 2.169 1.197 1.456 0.916 0.946 3.527 3.625 -2.418 1.420 2.977 0.340 0.848 2.169 1.178 1.161 39.389 38.814 40.011 39.252 6124 954
362SG350-68 0.867 2.023 1.116 1.528 1.491 1.311 1.469 5.715 -3.430 1.954 3.977 0.256 0.538 1.961 0.841 0.808 25.186 24.190 27.689 26.946 4375 1007
400SG200-33 0.334 0.859 0.429 1.603 0.204 0.782 0.133 0.895 -1.894 1.139 2.602 0.470 0.202 0.842 0.373 0.332 11.168 9.928 9.971 9.701 991 589
400SG200-43 0.434 1.107 0.553 1.597 0.263 0.778 0.294 1.157 -1.889 1.136 2.593 0.469 0.295 1.107 0.515 0.477 15.429 14.276 14.220 13.817 2141 967
400SG200-54 0.542 1.371 0.686 1.590 0.325 0.775 0.579 1.440 -1.883 1.133 2.583 0.469 0.389 1.371 0.658 0.624 19.693 18.673 19.109 18.563 3372 1201
400SG200-68 0.680 1.700 0.850 1.581 0.403 0.770 1.152 1.794 -1.875 1.129 2.571 0.468 0.540 1.700 0.850 0.825 28.202 24.708 27.517 24.756 4876 1360
400SG200-97 0.959 2.344 1.172 1.563 0.555 0.760 3.308 2.498 -1.858 1.121 2.544 0.467 0.806 2.344 1.172 1.158 40.162 34.664 40.162 34.659 6839 1299
400SG250-33 0.369 0.995 0.497 1.643 0.346 0.969 0.147 1.506 -2.386 1.407 3.055 0.390 0.211 0.944 0.397 0.351 11.873 10.514 10.530 10.264 991 589
400SG250-43 0.479 1.283 0.641 1.637 0.446 0.965 0.325 1.951 -2.381 1.404 3.046 0.389 0.294 1.268 0.534 0.489 15.981 14.635 15.133 14.726 2141 967
400SG250-54 0.599 1.591 0.796 1.630 0.554 0.962 0.640 2.432 -2.375 1.401 3.037 0.388 0.388 1.591 0.681 0.640 20.397 19.150 20.506 19.938 3372 1201
400SG250-68 0.751 1.975 0.987 1.622 0.688 0.957 1.273 3.038 -2.368 1.398 3.025 0.387 0.530 1.975 0.891 0.858 26.669 25.675 27.679 26.913 4876 1360
400SG250-97 1.061 2.730 1.365 1.604 0.953 0.948 3.658 4.255 -2.352 1.390 3.000 0.386 0.908 2.730 1.343 1.351 44.884 40.448 45.635 40.443 6839 1299
400SG350-68 0.894 2.525 1.263 1.681 1.547 1.316 1.514 6.736 -3.354 1.922 3.976 0.288 0.545 2.447 0.955 0.909 28.602 27.223 30.818 30.002 4876 1360
400SG350-97 1.265 3.503 1.751 1.664 2.158 1.306 4.360 9.488 -3.339 1.915 3.953 0.286 0.917 3.483 1.502 1.473 44.961 44.092 49.104 47.809 6839 1299
400SG350-118 1.533 4.184 2.092 1.652 2.587 1.299 7.855 11.458 -3.328 1.909 3.936 0.285 1.235 4.184 1.980 1.955 59.268 58.533 62.640 61.275 8235 1256

Page 5 | Load Bearing Wall Members www.steelnetwork.com | 1-888-474-4876 032020 | The Steel Network, Inc.
Load Bearing Wall Members SigmaStud® Section Properties
Refer to Important Table Notes on Page 5
®
SigmaStud Section Properties
Gross Properties Torsional Properties Effective Properties 50 ksi
Section
Area Ix Sx Rx Iy Ry Jx10 3
Cw Xo m Xo Ae (net) Ixe Sxe Sxe (net) Mal Mal (net) Mad Mad (net) Va Va (net)
(All 50 ksi) ß
(in )
2
(in ) 4
(in )
3
(in) (in ) 4
(in) (in )
4
(in )
6
(in) (in) (in) (in )2
(in )
4
(in ) (in ) (in-k) (in-k) (in-k) (in-k) (lbs) (lbs)
3 3

550SG162-33 0.362 1.522 0.554 2.051 0.096 0.514 0.144 0.864 -0.203 0.495 2.124 0.991 0.261 1.522 0.498 0.492 14.920 14.716 11.731 11.263 996 586
550SG162-43 0.469 1.963 0.714 2.045 0.122 0.510 0.318 1.097 -0.191 0.504 2.116 0.992 0.364 1.963 0.663 0.655 19.843 19.611 16.926 16.198 2141 953
550SG200-33 0.423 1.882 0.684 2.110 0.175 0.643 0.169 1.783 -0.716 0.160 2.319 0.905 0.315 1.858 0.609 0.602 18.234 18.016 14.840 14.464 996 586
550SG200-43 0.549 2.432 0.884 2.104 0.225 0.640 0.372 2.294 -0.708 0.165 2.310 0.906 0.447 2.432 0.833 0.826 24.934 24.718 21.359 20.787 2141 953
550SG200-54 0.687 3.023 1.099 2.097 0.278 0.636 0.734 2.838 -0.700 0.172 2.301 0.907 0.577 3.023 1.058 1.050 31.665 31.425 28.982 28.186 3372 1176
550SG200-68 0.862 3.761 1.368 2.089 0.344 0.631 1.460 3.510 -0.689 0.180 2.289 0.909 0.755 3.761 1.368 1.361 45.387 45.149 42.130 40.928 4793 1298
550SG200-97 1.219 5.229 1.901 2.072 0.471 0.622 4.201 4.816 -0.667 0.197 2.263 0.913 1.066 5.229 1.901 1.891 65.164 64.815 65.164 64.762 6657 1207
550SG250-33 0.457 2.140 0.778 2.163 0.302 0.813 0.182 2.936 -1.157 0.109 2.584 0.800 0.324 2.055 0.644 0.634 19.272 18.975 15.414 15.050 996 586
550SG250-43 0.594 2.767 1.006 2.158 0.389 0.809 0.403 3.788 -1.149 0.104 2.575 0.801 0.446 2.750 0.860 0.848 25.735 25.384 22.319 21.755 2141 953
550SG250-54 0.744 3.442 1.252 2.151 0.483 0.806 0.794 4.701 -1.141 0.098 2.565 0.802 0.576 3.442 1.092 1.078 32.686 32.274 30.488 29.686 3372 1176
550SG250-68 0.933 4.286 1.559 2.143 0.599 0.801 1.581 5.835 -1.131 0.090 2.552 0.804 0.745 4.286 1.418 1.403 42.443 42.007 41.569 40.458 4793 1298
550SG250-97 1.320 5.970 2.171 2.126 0.826 0.791 4.552 8.069 -1.108 0.073 2.525 0.807 1.143 5.970 2.133 2.121 71.321 70.907 71.151 69.241 6657 1207
550SG300-43 0.639 3.103 1.128 2.203 0.622 0.987 0.434 5.742 -1.597 0.369 2.894 0.695 0.443 2.993 0.876 0.859 26.214 25.729 23.034 22.484 2141 953
550SG300-54 0.800 3.861 1.404 2.197 0.773 0.983 0.855 7.139 -1.589 0.363 2.884 0.696 0.580 3.736 1.128 1.110 33.781 33.222 31.625 30.830 3372 1176
550SG300-68 1.004 4.812 1.750 2.189 0.960 0.978 1.702 8.883 -1.579 0.355 2.870 0.697 0.756 4.765 1.476 1.455 44.180 43.572 43.406 42.278 4793 1298
550SG300-97 1.422 6.711 2.440 2.172 1.332 0.968 4.902 12.348 -1.557 0.340 2.843 0.700 1.187 6.711 2.310 2.293 69.159 68.650 69.483 67.704 6657 1207
550SG300-118 1.724 8.048 2.927 2.161 1.590 0.960 8.837 14.766 -1.541 0.328 2.822 0.702 1.462 8.048 2.812 2.793 93.863 93.245 96.698 94.218 7956 1142
600SG162-33 0.379 1.854 0.618 2.211 0.104 0.523 0.151 1.090 -0.234 0.432 2.284 0.990 0.279 1.854 0.558 0.551 16.702 16.505 12.720 12.230 878 634
600SG162-43 0.492 2.392 0.797 2.205 0.133 0.519 0.334 1.386 -0.222 0.441 2.276 0.990 0.386 2.392 0.741 0.734 22.192 21.969 18.413 17.644 1959 1073
600SG200-33 0.440 2.291 0.764 2.282 0.187 0.653 0.176 2.203 -0.744 0.097 2.487 0.910 0.333 2.266 0.682 0.675 20.417 20.203 16.201 15.800 878 634
600SG200-43 0.572 2.962 0.987 2.276 0.241 0.650 0.388 2.837 -0.737 0.102 2.479 0.912 0.470 2.962 0.931 0.924 27.880 27.673 23.374 22.760 1959 1073
600SG200-54 0.715 3.683 1.228 2.269 0.299 0.646 0.764 3.513 -0.729 0.108 2.469 0.913 0.605 3.683 1.182 1.174 35.379 35.150 31.797 30.937 3372 1452
600SG200-68 0.898 4.586 1.529 2.261 0.370 0.642 1.521 4.350 -0.719 0.116 2.457 0.914 0.791 4.586 1.529 1.522 50.735 50.518 46.332 45.025 5352 1797
600SG200-97 1.269 6.386 2.129 2.243 0.508 0.633 4.376 5.980 -0.697 0.133 2.432 0.918 1.117 6.386 2.129 2.119 72.948 72.629 72.948 72.305 7610 1726
600SG250-33 0.475 2.599 0.866 2.340 0.320 0.822 0.189 3.590 -1.180 0.170 2.747 0.815 0.341 2.501 0.720 0.710 21.563 21.269 16.810 16.422 878 634
600SG250-43 0.617 3.362 1.121 2.334 0.413 0.818 0.418 4.633 -1.173 0.165 2.737 0.816 0.469 3.345 0.961 0.949 28.760 28.412 24.389 23.785 1959 1073
600SG250-54 0.772 4.183 1.394 2.328 0.513 0.815 0.824 5.752 -1.165 0.160 2.728 0.818 0.604 4.183 1.219 1.206 36.501 36.093 33.384 32.520 3372 1452
600SG250-68 0.969 5.213 1.738 2.320 0.636 0.810 1.642 7.145 -1.155 0.152 2.715 0.819 0.780 5.213 1.582 1.567 47.351 46.922 45.633 44.428 5352 1797
600SG250-97 1.371 7.270 2.423 2.303 0.879 0.800 4.727 9.893 -1.133 0.137 2.688 0.822 1.195 7.270 2.381 2.369 79.592 79.202 78.437 76.343 7610 1726
600SG300-43 0.662 3.761 1.254 2.384 0.655 0.995 0.449 6.972 -1.616 0.429 3.047 0.719 0.466 3.639 0.979 0.962 29.297 28.809 25.131 24.543 1959 1073
600SG300-54 0.829 4.683 1.561 2.377 0.814 0.991 0.885 8.670 -1.608 0.424 3.036 0.720 0.608 4.539 1.260 1.241 37.713 37.153 34.564 33.711 3372 1452
600SG300-68 1.040 5.840 1.947 2.369 1.012 0.986 1.763 10.793 -1.598 0.417 3.023 0.721 0.791 5.790 1.646 1.625 49.272 48.663 47.543 46.327 5352 1797
600SG300-97 1.473 8.155 2.718 2.353 1.404 0.976 5.078 15.015 -1.577 0.402 2.996 0.723 1.238 8.155 2.572 2.556 77.021 76.525 76.434 74.491 7610 1726
600SG300-118 1.786 9.789 3.263 2.341 1.678 0.969 9.154 17.967 -1.562 0.391 2.976 0.725 1.525 9.789 3.134 3.116 104.620 104.024 106.616103.892 9118 1649
800SG162-33 0.448 3.631 0.908 2.845 0.130 0.538 0.179 2.193 -0.302 0.261 2.912 0.989 0.298 3.631 0.754 0.744 22.576 22.270 16.445 15.895 595 595
800SG162-43 0.582 4.691 1.173 2.839 0.166 0.534 0.395 2.796 -0.292 0.269 2.903 0.990 0.439 4.691 1.056 1.047 31.604 31.335 24.107 23.217 1324 1268
800SG200-33 0.509 4.453 1.113 2.957 0.230 0.672 0.203 4.278 -0.791 0.064 3.134 0.936 0.352 4.431 0.930 0.919 27.843 27.525 21.591 21.107 595 595
800SG200-43 0.662 5.765 1.441 2.951 0.296 0.669 0.449 5.516 -0.784 0.059 3.126 0.937 0.522 5.765 1.325 1.317 39.673 39.425 31.423 30.667 1324 1268
800SG200-54 0.829 7.181 1.795 2.944 0.367 0.666 0.885 6.840 -0.777 0.054 3.117 0.938 0.701 7.181 1.731 1.724 51.819 51.620 43.141 42.055 2632 1994
800SG200-68 1.040 8.960 2.240 2.935 0.455 0.662 1.763 8.484 -0.767 0.047 3.105 0.939 0.933 8.960 2.240 2.235 74.340 74.180 63.400 61.713 5300 3156
800SG200-97 1.473 12.530 3.133 2.917 0.629 0.653 5.078 11.713 -0.748 0.033 3.081 0.941 1.320 12.530 3.133 3.126 107.352 107.117 104.064101.327 10888 4452
800SG250-33 0.544 5.002 1.250 3.033 0.382 0.838 0.217 6.837 -1.202 0.321 3.368 0.873 0.360 4.856 0.980 0.967 29.352 28.942 22.427 21.953 595 595
800SG250-43 0.707 6.478 1.620 3.027 0.493 0.835 0.479 8.833 -1.196 0.317 3.360 0.873 0.522 6.478 1.363 1.349 40.806 40.395 32.761 32.012 1324 1268
800SG250-54 0.885 8.074 2.019 3.020 0.612 0.832 0.945 10.975 -1.189 0.312 3.350 0.874 0.701 8.074 1.782 1.769 53.363 52.965 45.165 44.076 2632 1994
800SG250-68 1.111 10.081 2.520 3.012 0.761 0.827 1.883 13.649 -1.179 0.305 3.339 0.875 0.923 10.081 2.304 2.291 68.996 68.586 62.282 60.729 5300 3156
800SG250-97 1.575 14.116 3.529 2.994 1.055 0.818 5.428 18.950 -1.160 0.292 3.314 0.877 1.402 14.116 3.466 3.456 115.861 115.535 108.627105.815 10888 4452
800SG300-43 0.752 7.192 1.798 3.092 0.767 1.010 0.510 13.119 -1.617 0.573 3.633 0.802 0.518 7.028 1.387 1.368 41.519 40.945 33.663 32.933 1324 1268
800SG300-54 0.942 8.967 2.242 3.086 0.954 1.006 1.006 16.324 -1.610 0.568 3.623 0.802 0.705 8.804 1.839 1.820 55.068 54.497 46.575 45.502 2632 1994
800SG300-68 1.183 11.202 2.800 3.078 1.187 1.002 2.004 20.337 -1.601 0.562 3.611 0.803 0.934 11.176 2.394 2.373 71.673 71.061 64.531 62.977 5300 3156
800SG300-97 1.676 15.702 3.926 3.061 1.651 0.993 5.779 28.342 -1.582 0.549 3.586 0.805 1.441 15.702 3.719 3.703 111.337 110.877 105.253102.673 10888 4452
800SG300-118 2.034 18.902 4.725 3.048 1.976 0.986 10.426 33.962 -1.568 0.540 3.567 0.807 1.775 18.902 4.539 4.523 151.547 151.009 147.942144.251 13768 4546

The Steel Network, Inc. | 032020 www.steelnetwork.com | 1-888-474-4876 Load Bearing Wall Members | Page 6