Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 113 views

    Control Number Fan Powered: Psc/Ecm (Manual) - PWM Heat, Incremental T-Stat

    Uploaded by

    Ryn YahuF
    This document provides wiring instructions for a fan powered PSC/ECM control system with PWM heat and incremental thermostat. It includes a diagram labeling the wire connections from the controller to the transformer, fan relay, damper actuator and thermostat. Installation notes specify the proper procedure for linking the damper to the actuator.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Control Number Fan Powered: Psc/Ecm (Manual) - PWM Heat, Incremental T-Stat

    Uploaded by

    Ryn YahuF
    113 views1 page
    This document provides wiring instructions for a fan powered PSC/ECM control system with PWM heat and incremental thermostat. It includes a diagram labeling the wire connections from the controller to the transformer, fan relay, damper actuator and thermostat. Installation notes specify the proper procedure for linking the damper to the actuator.

    Original Title

    AlertonVAViH-SD

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides wiring instructions for a fan powered PSC/ECM control system with PWM heat and incremental thermostat. It includes a diagram labeling the wire connections from the controller to the transformer, fan relay, damper actuator and thermostat. Installation notes specify the proper procedure for linking the damper to the actuator.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    113 views1 page

    Control Number Fan Powered: Psc/Ecm (Manual) - PWM Heat, Incremental T-Stat

    Uploaded by

    Ryn YahuF
    This document provides wiring instructions for a fan powered PSC/ECM control system with PWM heat and incremental thermostat. It includes a diagram labeling the wire connections from the controller to the transformer, fan relay, damper actuator and thermostat. Installation notes specify the proper procedure for linking the damper to the actuator.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    FAN POWERED

    PSC/ECM (MANUAL) -
    CONTROL NUMBER
    PWM HEAT, INCREMENTAL T-STAT AL40

    AIR FLOW

    HI LO
    BLUE #18

    24VAC
    { TO TRANSFORMER
    GREEN (LO) YELLOW #18

    RED (HI) IN OUT


    GREEN #18
    G
    FILTER
    ONLY ORANGE #18 TO FAN RELAY OR TO "24VAC" TERMINAL
    BY OTHERS
    ON UNITS WITH ECM MOTOR (MANUAL PWM)
    GREEN (LO)

    RED (HI)

    RED #18
    TO "INC" TERMINAL ON EHM BOARD

    11

    16
    6

    9
    10

    12
    13

    15
    3

    7
    8

    14
    4

    LO HI
    GND

    COM

    COM

    COM
    IN-1
    BO-1
    24VAC

    IN-2

    IN-3

    IN-4
    BO-0

    BO-2
    BO-5

    IN O/MSET

    Alerton VAViH-SD
    COM +
    COM -
    +
    -

    ACTUATOR NOTE: PRIOR TO LINKING DAMPER DEPRESS CLUTCH RELEASE BUTTON AND ROTATE ACTUATOR COLLAR FULLY CLOCKWISE. LINK DAMPER OPEN. MOTOR TURNS COUNTER
    CLOCKWISE TO CLOSE.

    PROJECT: DATE:

    ENGINEER:
    SPEC. SYM.:
    CUSTOMER:

    You might also like