Gasoline Guidelines-1 PDF
Gasoline Guidelines-1 PDF
Gasoline Guidelines-1 PDF
Gasoline plays an important role in everyday life, powering everything from your automobile to your outdoor power
equipment. However, all gasoline is not the same. Knowing a few facts about your fuel can keep the engines in
your STIHL equipment running strong.
What’s the difference between my car’s engine and engines used in small power equipment?
Automobiles have comprehensive fuel and engine management systems controlled by electronics and numerous
sensors. You may not feel or hear anything going on when your car is running, but there are many measurements
and automatic adjustments being made to account for things like humidity, altitude, temperature and the quality of
the gasoline being used.
On the other hand, yard and garden power equipment like your STIHL tools are designed to be compact and
lightweight. These tools don’t have the space available for the equipment found in automobiles and so are much
more sensitive to issues like fuel quality.
Gasoline Guidelines
Any gasoline remaining in your storage can or left in your power equipment
for more than 2-3 months can lead to expensive damage to your
equipment’s fuel system and engine. This is why STIHL recommends always
using fresh fuel or specially formulated fuel mixes like STIHL MotoMix® in
your equipment. STIHL MotoMix® is a high-grade, high-octane, ethanol-free
premixed fuel containing STIHL HP Ultra synthetic oil. It is a pure and stable
fuel mixture that can be stored for up to two years in the original container
and is ideal for machines that are used infrequently.
What you need to know about Ethanol: Carburetor damage from stale fuel
Ethanol gasoline blends have different characteristics that need
to be considered when fueling your STIHL power equipment.
• Much of the gasoline sold throughout the United States contains ethanol.
The maximum ethanol content allowed by law for use in outdoor power
equipment is limited to 10% (E10). Most small power equipment engines
are designed to use no more than a 10% ethanol gasoline blend.
If you are not sure of the ethanol content in the gasoline you are
purchasing, ask the station attendant. If they are unsure, purchase
your fuel from another station that offers gasoline with no more
than 10% ethanol.
Damage to carburetor diaphragm
• Ethanol is a stronger solvent than gasoline and can soften, swell and
damage some rubber and plastic components that gasoline alone would
not harm.
The solvent properties of ethanol can also dissolve varnish and gum
deposits that have previously formed inside fuel storage cans, fuel tanks
or the equipment’s fuel system. When these deposits become dislodged,
they can mix with the fuel and plug small openings and filters within the Left: Plugged fuel filter screen
fuel system and cause costly damage to your equipment. Right: Clean fuel filter screen
Gasoline Guidelines
• Ethanol easily attracts and mixes with water, so any moisture in the air
can be absorbed by the ethanol gasoline blend. This moisture can corrode
metal components in the fuel system leading to expensive repairs.
If enough water is absorbed, the ethanol and water will settle out of the
gasoline blend. The resulting ethanol and water mixture is heavier than
the gasoline and settles to the bottom of the equipment’s tank or your
storage can, leaving a layer of gasoline floating on top.
Corrosion inside carburetor
With the ethanol separated from the gasoline, the layer of gasoline now
has a lower octane level than the original ethanol gasoline blend. If you
originally bought 87 or 89 octane fuel, the gasoline layer in your storage
container now has a lower octane than what the engine manufacturer
intended to be used, resulting in unstable engine operation, power loss
and major engine failures.
This separation of ethanol and gasoline can also occur inside the fuel tank
of your equipment. Since the fuel is often drawn from the bottom of the
fuel tank, the engine is drawing in a mixture of ethanol and water with
no gasoline and, in the case of 2-cycle engines, also has no lubricating
oil. This ethanol/water mix is thicker than gasoline and cannot easily pass
through the fuel system. This can result in hard starting, unsafe high idle
speeds, stalling and can ultimately lead to engine damage or fuel system
failure, resulting in costly repairs.
• For air-cooled, two-cycle engines, use a quality mix oil that meets the
engine manufacturer’s recommendations. All STIHL oils are designed to
readily mix with gasoline containing 10% ethanol. STIHL HP Ultra Oil is
especially suited for use with E10 gasoline.
• Shake your gas can well when first mixing the oil to thoroughly disperse Corrosion from water inside carburetor
the oil in the fuel mixture.
Gasoline Guidelines