WCC US

The World Class Brand

A complete range of quality high-pressure tools for all Always at the leading edge of technology, Enerpac has
industrial applications, with local availability and after continued to develop its range of time and cost-savings
sales service anywhere in the world…this is what has tools, utilizing modern engineered materials to improve
made Enerpac the undisputed global market leader in productivity and minimize operator fatigue.
high pressure hydraulics.
Enerpac’s commitment to the continued development of
Our focus is to provide our customers with the most quality high-pressure tools ensures that the products you
extensive line of products and accessories that maximize purchase are the best tools in the industry. We will
force to increase productivity and make work safer and continue to lead the way in the development of quality
easier to perform. high-pressure tools for all industrial applications.

Experience and Expertise Safety

At Enerpac, we
are committed
to safety.
Unfortunately, serious
incidents can happen on a
job site. Nevertheless, such
mishaps may be avoidable
if workers pay attention to the hazards and potential risks,
and know how to use tools correctly. Whether you work in
maintenance or production, power plant, shipyard, mine,
shop floor or construction site; learning to use hydraulic
With over 1,500 distributors and a network of service
tools safely is mandatory.
and engineering support across the globe, Enerpac
has become the product of choice in industries such Our Goal Zero initiative is part of our global commitment
as infrastructure, power generation, mining, oil & gas, to improve workplace safety. We are committed to
manufacturing, shipbuilding and railroads. achieve the Goal of Zero harm to customers and
end-users of our products.

This World Class Collection catalog is

only a selection of the products we offer.
To see the full line of products, please
refer to the Enerpac Industrial Tools
catalog or visit www.enerpac.com.

2 © 2015 Enerpac, All Rights Reserved

 Enerpac Academy - The Power of Knowledge
The Enerpac Academy is our in-house training program,
offering Enerpac end users and distributors the
opportunity to be trained in the use and maintenance of
high-pressure hydraulic tools.

Operating these tools requires sound knowledge of how

they work and how they should be maintained. Correct
use of these tools increases safety and reduces risk –
both for the operator and for the environment in which
the tools are used. Having the right training enables the
operator to use the tools safely and properly.

In-house Training Centers Training Center Locations

The training courses are designed to be highly interactive • Columbus, Wisconsin (USA)
with a strong hands-on element. Each training course is • Ede (The Netherlands)
led by a qualified trainer, an Enerpac specialist capable of
providing high quality training. A written or practical exam • Hosur, Bangalore area (India)
is part of certain training courses.
Enerpac Academy offers a meticulously compiled
training program covering tool knowledge, repairs and
maintenance, and safe operation of Enerpac hydraulic
tools. If you would like to schedule a training course,
please contact Enerpac for a training calendar,
application form, and brochure at www.enerpac.com.

www.enerpac.com ® 3
 Enerpac Hydraulic Cylinders
World Class SINGLE-ACTING, SPRING RETURN

Cylinders
All over the world, Enerpac cylinders
provide force to major industries—
construction, shipbuilding, mining, wind,
manufacturing and more.
Enerpac cylinders lift naval vessels for
repair, level heavy bridge sections and pull
parts together for welding. They also allow
for controlled positioning of heavy loads RC-DUO GENERAL PURPOSE CYLINDERS LOW HEIGHT CYLINDERS
and provide power and precision as part • The GR2 Bearing System absorbs eccentric • Compact and portable
loading to prevent galling cylinder parts • Large plunger contact area with grooved end
of specialized hydraulic presses. • Heavy-duty return spring for fast retraction
• Collar threads, plunger threads and base
Enerpac hydraulic cylinders are available mounting holes enable easy fixturing on
in more than 100 standard configurations. most models
Whatever the application, whatever the
needed capacity, size, or stroke, there’s
Model Cylinder Stroke Collapsed Model Cylinder Stroke Collapsed
a single- or double-acting, solid or hollow Number Class Height Number Class Height
plunger, lightweight or heavy-duty Enerpac (tons) (in) (in) (tons) (in) (in)
cylinder to do the job for you. RC-50 5 .63 1.63 RCS-101 10 1.50 3.47
RC-51 5 1.00 4.34 RCS-201 20 1.75 3.88
RC-53 5 3.00 6.50 RCS-302 30 2.44 4.63
RC-55 5 5.00 8.50 RCS-502 50 2.38 4.81
RC-57 5 7.00 10.75 RCS-1002 100 2.25 5.56
RC-59 5 9.13 12.75 RSM-50 5 .25 1.28
HOLLOW PLUNGER RC-101 10 1.00 3.53 RSM-100 10 .44 1.69
RC-102 10 2.13 4.78 RSM-200 20 .44 2.03
RC-104 10 4.13 6.75 RSM-300 30 .50 2.31
RC-106 10 6.13 9.75 RSM-500 50 .63 2.63
RC-108 10 8.00 11.75 RSM-750 75 .63 3.13
RC-1010 10 10.13 13.75 RSM-1000 100 .63 3.38
RC-1012 10 12.00 15.75 RSM-1500 150 .63 3.94
RC-1014 10 14.00 17.75
RC-151 15 1.00 4.88
RC-152 15 2.00 5.88
RC-154 15 4.00 7.88
RC-156 15 6.00 10.69
RC-158 15 8.00 12.69
PULL CYLINDERS
RC-1510 15 10.00 14.69
RC-1512 15 12.00 16.69
RC-1514 15 14.00 18.69
RC-251 25 1.00 5.50
SPRING OR HYDRAULIC RETURN 25 2.00 6.50
RC-252
• Hollow plunger design for both push
RC-254 25 4.00 8.50
and pull forces
RC-256 25 6.25 10.75
• Safety valve in double-acting models
prevents over pressurizing RC-258 25 8.25 12.75
RC-2510 25 10.25 14.75
RC-2512 25 12.25 16.75
Model Cylinder Capacity Stroke Collapsed RC-2514 25 14.25 18.75
Number (tons) Height RC-308 30 8.25 15.25
Push Pull (in) (in) RC-502 50 2.00 6.94
RCH-120 12 – .31 2.19 RC-504 50 4.00 8.94
RCH-121 12 – 1.63 4.75 RC-506 50 6.25 11.13
RCH-1211 12 – 1.63 4.75 RC-5013 50 13.25 18.13 PULL CYLINDERS
RCH-123 12 – 3.00 7.25 RC-756 75 6.13 11.25 • Chrome plated plunger
RCH-202 20 – RC-7513 75 13.13 19.38 • Replaceable links on BRP models
2.00 6.38
RCH-206 20 – 6.10 12.05 RC-1006 100 6.63 14.06
RCH-302 30 – 2.50 7.03 RC-10010 100 10.25 17.69 Model Cylinder Stroke Extended
RCH-306 30 – 6.13 13.00 Number Class Height
RCH-603 60 – 3.00 9.75 (tons) (in) (in)
RCH-606 60 – 6.00 12.75 BRC-25 2.5 5.00 15.44
RCH-1003 100 – 3.00 10.00 BRC-46 5.0 5.50 17.38
RRH-307 30 24 7.00 13.00 BRC-106 10.0 5.95 17.33
RRH-606 60 42 6.50 12.75 BRP-106C* 10.0 5.90 28.50
RRH-6010 60 42 10.12 17.25 BRP-106L* 10.0 5.90 28.50
RRH-1001 100 68 1.50 6.50 BRP-306* 30.0 6.00 48.82
RRH-1006 100 68 6.00 13.50 BRP-606* 60.0 6.00 34.32
*Fitted with rubber bellows for rod protection.

4 © 2015 Enerpac, All Rights Reserved

 Enerpac Hydraulic Cylinders
ALUMINUM CYLINDERS - LIGHTWEIGHT DOUBLE-ACTING CYLINDERS

SINGLE-ACTING, SPRING RETURN WITH LOCK NUT, SPRING RETURN HEAVY-DUTY, LONG-STROKE CYLINDERS
• Lightweight, easy to carry and position • With lock nut to secure loads mechanically • Plunger and collar threads, base mounting holes
• Handles standard on all models • Lightweight, easy to carry and position for easy fixturing
• Handles standard on all models • Solid plunger design; built-in safety valve
• For industrial, construction and high-cycling
production applications
Model Cylinder Stroke Collapsed Model Cylinder Stroke Collapsed Model Cylinder Capacity Stroke Collapsed
Number Class Height Number Class Height Number (tons) Height
(tons) (in) (in) (tons) (in) (in) Push Pull (in) (in)
RAC-202 20 1.97 6.85 RACL-302 30 1.97 9.10 RR-1010 10 4 10.00 16.13
RAC-204 20 3.94 8.82 RACL-304 30 3.94 11.07 RR-1012 10 4 12.00 18.00
RAC-206 20 5.91 10.79 RACL-306 30 5.91 13.04 RR-308 30 5 8.25 15.25
RAC-302 30 1.97 7.13 RACL-502 50 1.97 9.29 RR-3014 30 5 14.50 21.63
RAC-304 30 3.94 9.09 RACL-504 50 3.94 11.26 RR-506 50 10 6.13 13.06
RAC-306 30 5.91 11.06 RACL-506 50 5.91 13.23 RR-5013 50 10 13.13 20.06
RAC-502 50 1.97 7.32 RACL-1002 100 1.97 11.65 RR-1006 100 48 6.63 14.06
RAC-504 50 3.94 9.29 RACL-1004 100 3.94 13.62 RR-10013 100 48 13.13 20.63
RAC-506 50 5.91 11.26 RACL-1006 100 1.97 15.59 RR-1506 150 74 6.13 15.19
RAC-1004 100 3.94 10.67 RACL-1502 150 5.91 12.72 RR-15013 150 74 13.13 22.20
RAC-1006 100 5.91 12.64 RACL-1504 150 3.94 14.69 RR-2006 200 112 6.00 16.94
RAC-1008 100 7.87 14.61 RACL-1506 150 5.91 16.65 RR-20013 200 112 13.00 23.94
RAC-1506 150 5.91 13.49 * Custom strokes available.
* Custom strokes available.

HOLLOW PLUNGER, SINGLE-ACTING SOLID PLUNGER, DOUBLE-ACTING PRECISION PRODUCTION CYLINDERS

• Hollow plunger design allows for both pull and • Double-acting for rapid plunger retraction • Double-acting operation provides force in both
push forces • Safety valve prevents overpressurization directions for maximum versatility
• Lightweight, easy to carry and position • Lightweight, easy to carry and position • Unique mounting configurations simplify fixturing
• Designed for long life; the best choice
for production applications

Model Cylinder Stroke Collapsed Model Cyl. Capacity Stroke Collapsed Model Cylinder Capacity Stroke Collapsed
Number Class Height Number (tons) Height Number (tons) Height
(tons) (in) (in) Push Pull (in) (in) Push Pull (in) (in)
RACH-202 20 1.97 7.41 RAR-202 24.2 14.4 1.97 7.45 RD-41 3.93 1.72 1.13 7.31
RACH-206 20 5.91 12.41 RAR-206 24.2 14.4 5.91 11.29 RD-43 3.93 1.72 3.13 9.31
RACH-302 30 1.97 8.20 RAR-302 34.2 19 1.97 7.92 RD-46 3.93 1.72 6.13 12.31
RACH-306 30 5.91 13.12 RAR-306 34.2 19 5.91 11.86
RD-91 8.84 4.91 1.13 8.75
RACH-604 60 3.94 12.41 RAR-502 55 21 1.97 7.92
RD-93 8.84 4.91 3.13 10.78
RACH-606 60 5.91 14.97 RAR-504 55 21 3.94 9.89
RACH-1002 100 1.97 10.16 RAR-506 55 21 5.91 11.86 RD-96 8.84 4.91 6.13 13.78
RACH-1006 100 5.91 15.40 RAR-1004 111 62 3.94 11.86 RD-910 8.84 4.91 10.13 17.78
RACH-1502 150 1.97 11.03 RAR-1006 111 62 5.91 13.83 RD-166 15.71 8.28 6.25 15.31
RACH-1506 150 5.91 16.93 RAR-1008 111 62 7.87 15.80 RD-1610 15.71 8.28 10.25 19.31
* Custom strokes available. RAR-1506 176 102 5.91 13.71 RD-256 24.54 10.74 6.25 16.69
* Custom strokes available. RD-2510 24.54 10.74 10.25 20.69

www.enerpac.com ® 5
 Enerpac 10,000 psi Cylinders and Jacks
SINGLE-ACTING, HIGH TONNAGE DOUBLE-ACTING, HIGH TONNAGE LOCK NUT, HIGH TONNAGE

SINGLE-ACTING, LOAD RETURN* DOUBLE-ACTING, HYDRAULIC RETURN* SINGLE-ACTING, LOAD RETURN*

• Integral stop ring provides piston blow-out • Safety valve in retract side of cylinder helps to • Safety Lock Nut for mechanical load holding
protection prevent damage in case of over-pressurization • Interchangeable, hardened grooved saddles
• Plunger wiper reduces contamination ingress, • Plunger wiper reduces contamination ingress,
extending cylinder life extending cylinder life

Model Cylinder Stroke Collapsed Model Cylinder Stroke Collapsed Model Cylinder Stroke Collapsed
Number Class Height Number Class Height Number Class Height
(tons) (in) (in) (tons) (in) (in) (tons) (in) (in)
CLSG-502 50 1.97 6.38 CLRG-1002 100 1.97 7.16 CLL-502 50 1.97 6.46
CLSG-506 50 5.91 10.31 CLRG-1006 100 5.91 11.09 CLL-506 50 5.91 10.39
CLSG-5010 50 9.84 14.25 CLRG-10010 100 9.84 15.03 CLL-5010 50 9.84 14.33
CLSG-1002 100 1.97 7.16 CLRG-1502 150 1.97 7.72 CLL-1002 100 1.97 7.36
CLSG-1006 100 5.91 11.09 CLRG-1506 150 5.91 11.65 CLL-1006 100 5.91 11.30
CLSG-10010 100 9.84 15.03 CLRG-15010 150 9.84 15.59 CLL-10010 100 9.84 15.24
CLSG-1502 150 1.97 7.72 CLRG-2002 200 1.97 8.50 CLL-1502 150 1.97 8.23
CLSG-1506 150 5.91 11.65 CLRG-2006 200 5.91 12.44 CLL-1506 150 5.91 12.17
CLSG-15010 150 9.84 15.59 CLRG-20012 200 11.81 18.35 CLL-15010 150 9.84 16.10
CLSG-2002 200 1.97 8.50 CLRG-2502 250 1.97 9.25 CLL-2002 200 1.97 9.57
CLSG-2006 200 5.91 12.44 CLRG-2506 250 5.91 13.19 CLL-2006 200 5.91 13.50
CLSG-20012 200 11.81 18.35 CLRG-25012 250 11.81 19.09 CLL-20012 200 11.81 19.41
CLSG-25012 250 11.81 19.09 CLRG-30012 300 11.81 22.13 CLL-2502 250 1.97 9.80
CLSG-30012 300 11.81 22.13 CLRG-40012 400 11.81 24.59 CLL-25012 250 11.81 19.65
CLSG-40012 400 11.81 24.59 CLRG-50012 500 11.81 26.34 CLL-3002 300 1.97 11.61
CLSG-50012 500 11.81 26.34 CLRG-60012 600 11.81 26.73 CLL-30012 300 11.81 21.46
CLSG-60012 600 11.81 26.73 CLRG-80012 800 11.81 28.50 CLL-40012 400 11.81 23.03
CLSG-80012 800 11.81 28.50 CLRG-100012 1000 11.81 32.05 CLL-50012 500 11.81 24.61
CLSG-100012 1000 11.81 32.05 * All models available in 2" stroke increments from 2" to 12". CLL-60012 600 11.81 25.39
* All models available in 2" stroke increments from 2" to 12". NOTE: All cylinders meet ASME B30.1 and ISO 10100 standards. CLL-80012 800 11.81 27.76
NOTE: All cylinders meet ASME B30.1 and ISO 10100 standards. CLL-100012 1000 11.81 29.33
* All models available in 2" stroke increments from 2" to12".

LOW PROFILE, HIGH TONNAGE SPREADER CYLINDERS

CLP SERIES PANCAKE LOCK NUT CYLINDERS
• Single-acting, load return
• Extremely low profile for use in confined areas
• Lock nut for mechanical load holding safety
• Includes integral swivel saddle

SERIES A, WR, HYDRAULIC WEDGIE AND

SPREAD CYLINDERS
Model Cylinder Stroke Collapsed
• WR-5: for use in very confined areas
• WR-15: for long stroke spreading
Number Class Height
• A-92: spreader attachment; threads onto RC-Series
(tons) (in) (in) 10 ton cylinders (except RC-101)
CLP-602 60 1.97 4.92
CLP-1002 100 1.97 5.39 Model Capacity Tip Max. Oil
CLP-1602 160 1.77 5.83 Number Clearance Spread Capacity
CLP-2002 200 1.77 6.10 (ton) (in) (in) (in3)
CLP-2502 250 1.77 6.26 WR-5 1.00 .50 3.70 0.61
CLP-4002 400 1.77 7.01 WR-15 .75 1.26 11.50 3.91
CLP-5002 500 1.77 7.56 A-92 1.00 1.38 6.25 –
* Screws onto RC-Series 10 ton cylinders (except RC-101).

6 © 2015 Enerpac, All Rights Reserved

 Enerpac 10,000 psi Cylinders and Jacks
JACKS POW'R-RISER® Pow'R-LOCK®

JHA-SERIES SAF-T-LITE® ALUMINUM JACKS POW'R-RISER® LIFTING JACKS Pow'R-LOCK® PORTABLE LIFT SYSTEM
•  All-directional operation on 7, 15 and 35 ton • 60, 100, 150 and 200-ton capacities with pneu- • Provides continuous locking protection during lift,
•  Two-directional operation (vertical and horizontal) matic or electric pumps for the toughest jobs lower and hold functions
on 75 and 150 ton models • 3-pos. handle provides easy tilt and transport • Simple 2-button pendant allows operation of raise
JH-SERIES PREMIUM STEEL JACKS • Complies with ASME B30.1 specifications and lower functions from up to 20 feet away
•  Chrome plated plungers • Meets ANSI B30.1-2009, AS/NZS‑2538, AS/
• Machined flat front and bottom surfaces permit NZS‑2693 certification criteria
flush alignment in tight corners

Model Capacity Stroke Collapsed Model Capacity Stroke Collapsed Model Capacity Stroke Collapsed
Number Height Number Height Number Height
(tons) (in) (in) (tons) (in) (in) (tons) (in) (in)
JHA-73 7 3.00 5.25 PREMB06014L 60 14 24 PL20014-ASA 200 14.0 34
JHA-156 15 6.06 9.75 PRAMA06014L 60 14 24 PL20025-ASA 200 24.5 45.5
JHA-356 35 6.13 10.13 PREMB06027L 60 27 37
JHA-756 75 6.06 11.25 PRAMA06027L 60 27 37
JHA-1506 150 6.13 12.88 PREMB10016L 100 16 26
JH-306 30 6.13 10.00 PRASA10016L 100 16 26
JH-506 50 6.09 10.25 PREMB10027L 100 27 37
JH-1006 100 6.06 11.31 PRASA10027L 100 27 37
PREMB15016L 150 15.5 26
PRASA15016L 150 15.5 26
PREMB15027L 150 26.5 37
PRASA15027L 150 26.5 37
PRASA20016L 200 15.5 26
PRASA20027L 200 26.5 37
* PRAMA with air pump; PREME with electric pump.

SPECIALTY LIFTING TOOLS CYLINDER PUMP SETS

HYDRAULIC MACHINE LIFTS VERTICAL LIFTING WEDGE SINGLE-ACTING CYLINDER PUMP SETS

• For lifting heavy equipment with minimal access •  Requires .39 inch access gap •  Optimum component match
• Separate hydraulic pump enhances safety • .83 inch of vertical lift from each step (max. lift to •  6 ft. hose, gauge, adaptor
• Adjustable toe starting height 2.72 inches with optional LWB-1 stepped block) •  2-speed hand pumps
• Extendible support feet provide extra stability • Automatic mechanical retraction (single-acting)
• Includes RC-DUO Series cylinder
with CR-400 coupler
Model Capacity Cylinder Stroke
Number Model No.
(tons) (in)
Model Capacity Stroke Toe Position Oil
Model Capacity Max. Lift Min. Oil SCR106H 10 RC-106 6.13
Number (in) Capacity
Number per Stage Clearance Capacity SCR252H 25 RC-252 2.00
(tons) (in) min central max (in3) Gap SCL101H 10 RCS-101 1.50
SOH-10-6 8.5 5.39 0.79 3.74 6.69 13.7 (ton) (in) (in) (in3) SCL302H 30 RCS-302 2.44
SOH-23-6 20 6.18 1.18 4.33 7.48 32.0 LW-16 16 .83 .39 4.75 SCH202H 20 RCH-202 2.00

www.enerpac.com ® 7
 Enerpac Hydraulic Pumps
World Class Pumps HYDRAULIC HAND PUMPS

When it comes to increasing productivity, labor

efficiency and speed of operations, Enerpac
high-pressure tools and components provide a
significant hydraulic advantage.
With a 100-year history of quality and
innovation and the broadest line of hydraulic
tools and components in the business,
Enerpac leads the industry by setting new
standards in design, strength and durability.
COMPOSITE HYDRAULIC HAND PUMPS STEEL HYDRAULIC HAND PUMPS
Strict quality programs, zero tolerance for • Lightweight design; impact and corrosion resistant • Reduced handle effort and ergonomic grip for less
defects, and ISO-9001 certification are your • Single- and two-speed operation operator fatigue
assurance of safe, trouble-free operation. • Handle lock and lightweight construction for • Two-speed operation for fast and easy operation
easy carrying (except P-39)
• Quick grip handle allows for easy transport
• All steel construction, chrome plated plunger and
wiper system for durable, long lasting performance

Model For Maximum Displacement Usable Model For Maximum Displacement Usable
Number Cylinder Pressure per Stroke Oil Number Cyl. Pressure per Stroke Oil
(in3) Capacity (in3) Capacity
(psi) 1st 2nd (in3) (psi) 1st 2nd (in3)
P-141 S/A 10,000 N/A .055 20 P-39 S/A 10,000 N/A .15 47
P-142 S/A 10,000 .221 .055 20 P-77 S/A 10,000 1.00 .15 47
P-202 S/A 10,000 .221 .055 55 P-80 S/A 10,000 1.00 .15 134
P-391 S/A 10,000 N/A .151 55 P-801 S/A 10,000 1.00 .15 250
P-392 S/A 10,000 .687 .151 55 P-84 D/A 10,000 1.00 .15 134
P-802 S/A 10,000 2.40 .151 155 P-462 S/A 10,000 7.69 .29 453
P-842 D/A 10,000 2.40 .151 155 P-464 D/A 10,000 7.69 .29 453
S/A = single-acting; D/A = double-acting. S/A = single-acting; D/A = double-acting.

CORDLESS PUMPS LOW PRESSURE HAND PUMPS HIGH PRESSURE HAND PUMPS

• Lightweight design with integrated handle and • Bi-directional pumping (P-25 and P-50) • Two-speed operation for faster fill, reducing cycle
carrying strap for portability • For single-acting tools and cylinders times for many testing operations (P-2282)
• Bladder reservoir prevents contamination and allows • Single-speed operation • 303 stainless steel construction for use with
pump usage in any position distilled water, diesters, silicones, soluble oils and
• Powerful ½ horsepower motor and 28 volt Lithium-Ion petroleum (11-100, 11-400)
battery deliver exceptional speed and run time

Model Charger Output Flow Rate Usable

Number Voltage (in3/min) Oil Cap.
No 2000 10,000 Maximum Displacement Usable Model
(VAC) Load psi psi (in3) Model Maximum Displacement Usable
Number Pressure per stroke Oil Capacity Number Pressure per stroke Oil Capacity
XC-1201MB 115 125 30 15 60
XC-1202MB 115 125 30 15 120 (psi) (in3) (in3) (in3)
XC-1201ME 230 125 30 15 60 P-18 2,850 .16 18 (psi) 1st 2nd (in3)
XC-1202ME 230 125 30 15 120 P-25 2,500 .58 200 P-2282 40,000 .99 .037 60
XC-1201M* – 125 30 15 60 P-50 5,000 .29 200 11-100 10,000 – .152 45
XC-1202M* – 125 30 15 120 P-51 3,000 .25 50 11-400 40,000 – .038 45
Note: All models for single-acting tools and cylinders.
* Batteries and charger not included.

8 © 2015 Enerpac, All Rights Reserved

 Enerpac Hydraulic Pumps
Z-CLASS ELECTRIC HYDRAULIC PUMPS Z-CLASS AIR HYDRAULIC PUMPS

ZU4 ELECTRIC PUMPS ZE ELECTRIC PUMPS ZA4 AIR HYDRAULIC PUMPS

• High-efficiency pump has higher oil flow and • High-efficiency pump has higher oil flow and • Features Z-Class high efficiency pump design;
bypass pressure, runs cooler and requires 18% bypass pressure, runs cooler and requires 18% higher oil flow and bypass pressure than
less current draw than comparable pumps less current draw than comparable pumps comparable pumps
• Powerful 1.7 hp universal electric motor provides • ZE3: 1 hp, 40 cu in/min flow rate • Two speed operation and high by-pass pressure
high power-to-weight ratio and excellent low- ZE4: 1.5 hp, 60 cu in/min flow rate reduces cycle time for improved productivity
voltage operating characteristics ZE5: 3 hp, 120 cu in/min flow rate • ATEX rated
ZE6: 7.5 hp, 200 cu in/min flow

Model LCD For Valve Usable Model LCD For Valve Usable Model For Valve Usable
Number Cyl. Type Oil Cap. Number Cylinder Type Oil Cap. Number Cylinder Type Oil Cap.
(gal) (gal) (gal)
ZU4108DB S/A Elec. Dump VE-32D 2.0 ZE3108DB • S/A Elec. Dump VE-32D 2.0 ZA4204MX S/A Manual VM-32 1.0
ZU4308MB S/A Manual VM-33 2.0 ZE3208MB S/A Manual VM-32 2.0 ZA4208MX S/A Manual VM-32 2.0
ZU4320MB S/A Manual VM-33 5.0 ZE4308MB S/A Manual VM-33 2.0 ZA4220MX S/A Manual VM-32 5.0
ZU4208SB • S/A Electric VE-32 2.0 ZE4420LB • D/A Manual VM-43 5.0 ZA4404MX D/A Manual VM-43 1.0
ZU4408SB • D/A Electric VE-43 2.0 ZE4308SB • S/A Electric VE-33 2.0 ZA4408MX D/A Manual VM-43 2.0
ZU4308JB S/A Electric VE-33 2.0 ZE5410SG D/A Electric VE-43 2.5 ZA4410MX D/A Manual VM-43 2.5
ZU44408JB D/A Electric VE-43 2.0 ZE5420SG • D/A Electric VE-43 5.0 ZA4420MX D/A Manual VM-43 5.0
ZU4 Pumps are 115 volt, 1 ph. motor, output flow: ZE6440SG D/A Electric VE-43 10.0 ZA4440MX D/A Manual VM-43 10.0
60 in3/min @ 10,000 psi. S/A = single-acting; D/A = double-acting. S/A = single-acting; D/A = double-acting.
S/A = single-acting; D/A = double-acting.

ELECTRIC HYDRAULIC PUMPS AIR HYDRAULIC PUMPS GASOLINE HYDRAULIC PUMPS

ECONOMY PUMPS TURBO II ZG5 AND ZG6 GAS HYDRAULIC PUMPS

• Lightweight and compact • Operating air pressure: 25 – 125 psi • Features high efficiency pump design; higher
• Highest oil-flow-to-weight ratio: 200 in3/min up to • Quiet, only 76 dba with low air consumption oil flow and bypass pressure than comparable
200 psi; 20 in3/min up to 10,000 psi of 12 scfm pumps
• Single-phase 50/60-cycle universal motor XA -SERIES PGM2 ATLAS GAS HYDRAULIC PUMPS
• Ergonomic design for less operator fatigue • Available in 3 hp Honda®
• Variable oil flow and fine metering for
precise control

Model For Oil Flow Oil Flow Model For Engine Oil Valve Usable Oil
Model For Valve Usable Number Cylinder @ 0 psi @ 10,000 psi Number Cyl.* Flow** Type Capacity
Number* Cylinder Type Oil Cap. (in3/min) (in3/min) (hp) (in3/min) (gal)
(gal) PATG-1102N* S/A 60 10 PGM-2304R S/A 3.0 40 3/3 1.0
PUD-1100B S/A Dump valve .50 PAMG-1402N* D/A 60 10 PGM-2404R D/A 3.0 40 4/3 1.0
PUJ-1200B S/A Manual 3/2 .50 PARG-1102N** S/A 48 5 ZG5410MX-R D/A 5.5 100 4/3 2.5
PUJ-1201B S/A Manual 3/2 1.00 XA11 S/A 120 15 ZG5410MX-BR D/A 6.5 100 4/3 2.5
PUJ-1400B D/A Manual 4/3 .50 XA11G S/A 120 15 ZG6440MX-BCFH D/A 13.0 200 4/3 10.0
S/A = single-acting; D/A = double-acting. * 305 in3 (5 liter) reservoir available: PATG-1105N, PAMG-1105N. * S/A = single-acting; D/A = double-acting.
** Remote pendant controlled. ** Oil flow at 10,000 psi

www.enerpac.com ® 9
 Enerpac Industrial Tools
PIPE BENDERS PULLERS

QUICK, SAFE AND WRINKLE-FREE BENDING POSI LOCK® PULLERS MULTI-PURPOSE PULLER SETS
• Set includes pump, cylinder, hose, bender • Patented “safety cage” jaw retention system • Set comes with pump, hose, cylinder,
frame and bending shoes • Roll-threaded shafts for less effort gauge, adaptor and case
• Pipe range ½ - 4 inch nominal bore size when applying high torque • Also includes: grip puller, cross bearing
• With bending angle indicator for accuracy • Available in 2- and 3-jaw designs as well as puller, bearing cup and bearing puller
and convenience inside and outside pulling configurations attachments
• Available in 100-ton hydraulic grip puller • Quick set-up for a variety of jobs

Set Model Pipe Range Model Capacity Spread of Operation Set Model Cap. Grip Cross Bearing
Number * nominal bore (in) Number* jaws Number* Pullers* Bearing* Cup*
one shot sweep (tons) (in)
(tons) R S R S R S
STB-101B 0.50 – 2.00 – EP-106 10 .5-7 manual
BHP-1752 8 9.92 9.80 18.19 10.47 4.33 4.33
STB-221H 1.00 – 2.00 2.50 – 4.00 EP-110 20 1.0-15 manual
BHP-2751G 20 11.81 19.65 22.48 13.82 5.51 3.54
STB-202B 1.25 – 4.00 – EPH-110 15 1.0-15 hydraulic
BHP-3751G 30 15.24 31.50 27.99 17.87 5.71 6.77
* B = with electric pump; H = with hand pump. EPH-113 25 2.5-18 hydraulic
BHP-5751G 50 27.56 43.31 33.98 22.44 5.71 11.73
* 3 jaw models.
* R = max. reach in inches; S = max. spread in inches.

HYDRAULIC PUNCH MAINTENANCE SETS HYDRAULIC CUTTERS

MUCH FASTER THAN DRILLING THE UNIVERSAL HYDRAULIC TOOL BOX IDEAL FOR A WIDE RANGE OF MATERIALS
• Punches mild steel up to .50 inch thickness • Power to push, pull, lift, press, straighten, • Spring return for easy operation
• Durable steel case keeps tools and dies spread and clamp • Self-contained (WMC) and pump powered
together and provides for easy carrying • Sets include Enerpac lightweight hand (WHC) models available
and storage pump, 6 ft. hose, cylinder(s), gauge • Guillotine action for easy operation
• Round, oblong and square punches and and adaptor • Rotating head for operator convenience
dies available • Numerous attachments permit quick
• Available as Tool-Pump Set SP35SP configuration of specialized tools
Model Capacity Cutting Capacity
Number Ø (in)
Model Capac- Round Punch & Die Sets Model Capacity* No. of Single-Acting (ton) Bar* Bolt* Wire*
Number ity Included Hole Size Bolt Size Number Attachments Cylinder Model WMC-750 4 .70 .70 .75
(ton) (in) (mm) (in) (mm) (tons) No. Included WMC-1250 20 1.10 1.10 –
SPD-438 .44 11,1 ⅜ M10 MS2-4 2.5 28 RC-55 WMC-2000 13 1.22 .87 1.97
SPD-563 .56 14,3 ½ – MS2-10 5.0 31 RC-106 WHC-750* 4 .75 .75 –
SP-35S 35
SPD-688 .69 17,5 ⅝ M10 MS2-20 12.5 14 RC-256 WHC-1250* 20 1.10 1.10 –
SPD-813 .81 20,6 ¾ – MS2-1020 5.0-12.5 42 RC-102, 106, 256 WHC-2000* 13 1.22 .87 1.97
*W
 hen cylinders are used with attachments, the * Recommended pump P-392 hand pump.
maximum system pressure must be limited to half
the rated pressure (5,000 psi).

10 © 2015 Enerpac, All Rights Reserved

 Enerpac Industrial Tools
PRESSES

IP SERIES H-FRAME PRESSES IPR SERIES ROLL-FRAME PRESSES C-CLAMP PRESSes

• Capacities from 10 to 200 tons • Capacities from 50 to 200 tons • 5, 10 and 20 ton capacites
• Welded steel frames and powerful high- • Welded steel frames and powerful HP hydraulics • Operational in all positions
pressure hydraulics • Frame rolls easily on four steel roller bearings BENCH FRAME PRESS
• Exclusive Hydra-Lift™ for effortless adjustment • Cylinder mounting adapter allows lateral
positioning along rails
• Mounting holes for easy anchoring

Model Pump Cyl. Cyl. Daylight Model Pump Cyl. Cyl. Daylight Model Press Press Max. Bed
Number Type* Cap. Stroke HxW Number Type Cap. Stroke Height x Width Number Type Capacity Daylight
H E A (tons) (in) (in) (tons) (in)
IPH-1240 • 10 10 40.00 x 18.63 (tons) (in) (in) A-205 C-clamp 5 6.5
IPA-1244 • 10 10 40.00 x 18.63 IPR-5075 Electric 50 13.13 37.12 x 28.75 A-210 C-clamp 10 9.0
IPE-2505 • 25 6 54.50 x 29.00 IPR-10075 Electric 100 13.13 41.28 x 35.00 A-220 C-clamp 20 11.9
IPA-2520 • 25 14 54.50 x 29.00 IPR-20075 Electric 200 13.00 51.00 x 48.00 A-258 Bench 10 15.4
IPH-5030 • 50 6 48.56 x 28.75
IPA-5021 • 50 6 48.56 x 28.75
IPE-5005 • 50 6 48.56 x 28.75
IPE-5060 • 50 13 48.56 x 28.75
IPH-10030 • 100 10 42.50 x 35.00 SYSTEM COMPONENTS
IPA-10023 • 100 10 42.50 x 35.00
IPE-10060 • 100 13 42.50 x 35.00
* H = Hand; E = Electric; A = Air.

PRESSURE GAUGES

HOSES FLOW CONTROL VALVES

• Thermo-plastic hoses (700-series) for demanding • All valves are rated for 10,000 psi operating
applications, featuring 4:1 design factor pressure
• Heavy duty rubber hoses (900-series); the most • All valves feature NPTF porting to insure
complete offering: 34 different models up to against leakage at rated pressure
50 feet in length • All valves are painted, coated, or plated for
• High flow coupler with 3/8"-18 NPTF oil corrosion resistance
GLYCERINE FILLED PRESSURE GAUGES
• Dual scale reading in psi and bar connection, 1040 in3/min. maximum oil flow
• All pressure sensing parts sealed and • Use premium Enerpac HF hydraulic oil: prevents
dampened by glycerine for long life pump cavitation, additives help prevent rust,
• Includes safety blow-out disk and pressure oxidation and sludge
equalizing membrane Model Description
• GA45GC includes gauge, coupler and Model Description Number
45° adaptor Number
V-82 Needle valve
H-7220 Hose length 20 ft., 3/8" NPTF V-182 Needle valve
HC-9206 Hose length 6 ft., 3/8" NPTF, includes CH-604 V-8F Needle valve
HC-9210 Hose length 10 ft., 3/8" NPTF, includes CH-604 V-91 Snubber valve
Model Face Ø Connection Pressure Range V-10 Auto damper valve
HC-7206 Hose length 6 ft., 3/8" NPTF, includes CH-604
Number (in) V-17 Check valve
HC-7210 Hose length 10 ft., 3/8" NPTF, includes CH-604
(NPTF) (psi) (bar) C-604 3/8" High flow coupler complete V-42 Pilot operated check valve
G-2531R 2.5 1/4" Center Rear 0-1,000 0-70 CR-400 3/8" Female high flow coupler half V-66 Manually operated check valve
G-4088L 4 1/4" Lower Mount 0-10,000 0-700 CH-604 3/8" Male high flow coupler half V-66F Manually operated check valve
G-4039L 4 1/2" Lower Mount 0-10,000 0-700 HF-100 Premium hydraulic oil, one quart V-152 Pressure relief valve
GA45GC 2.5 3/8" Lower Mount 0-10,000 0-700 HF-101 Premium hydraulic oil, one gallon V-161 Sequence valve

www.enerpac.com ® 11
 Enerpac Professional Bolting Tools
World Class FLANGE MAINTENANCE TOOLS

Bolting Solutions
ENERPAC'S Bolting Solutions caters to the
complete bolting work-flow, ensuring joint
integrity in a variety of applications
throughout industry:

Joint Assembly
Enerpac's comprehensive line of joint
assembly products range from hydraulic and
mechanical alignment tools to PLC-controlled PARALLEL WEDGE SPREADERS FLANGE ALIGNMENT TOOLS
multi-point positioning systems. • Lightweight, portable, easy to use, • Easy to use, one person operation
one person operation • Corrects twist and rotational
• FSM-8 mechanical version misalignment without additional stress
Controlled Tightening • FSH-14 hydraulic version also available in pipelines
From mechanical torque multipliers to as set STF-14H including pump, hose • For most commonly used ANSI, API, BS
hydraulically driven square drive wrenches, and gauge and DIN flanges
and from low profile torque wrenches to inter-
connectable bolt tensioning tools; Enerpac
offers the products you need for accurate and
simultaneous tightening of multiple bolts.
Model Maximum Tip Max. 1) Oil Model Max. Minimum Flange Wall
Joint Separation Number Spreading Clearance Spread Capacity Number Lifting Bolt Size Thickness
Enerpac also provides hydraulic nut Force Force* (including gap between flanges)
splitters and a variety of mechanical and (ton) (in) (in) (in3) (ton) (in) (mm) (in) (mm)
hydraulic spreading tools for joint separation FSM-8 8 .24 3.16 – ATM-2 1 0.63 16 .55 - 3.29 14 - 82
during inspection, maintenance and FSH-14 14 .24 3.16 4.76 ATM-4 4 0.95 24 1.18 - 5.23 30 - 133
decommissioning operations. 1)
Using optional stepped block FSB-1. ATM-9** 10 1.24 31,5 3.66 - 9.00 93 - 228
* At 10,000 psi maximum operating pressure.
** ATM-9 includes an Enerpac hand pump and
hydraulic hose

HYDRAULIC NUT SPLITTERS HYDRAULIC FLANGE SPREADERS MANUAL TORQUE MULTIPLIERS

NC NUT CUTTERS PIN TYPE HYDRAULIC FLANGE SPREADERS ACCURATE TORQUE MULTIPLICATION
• Compact, ergonomic, lightweight design • Lightweight and ergonomic design for • Reversible, tighten or loosen nuts
NS NUT SPLITTERS ease of use and bolts
• Designed to suit ANSI B16.5/BS1560 flanges • Adjustable jaw widths from 2.75 - 8.50" for • Provides high output torque for accurate
• Interchangable heads provide maximum a wide range of applications make-up or break-out of fasteners
nut range flexibility • Available as a complete set including tool, • 1/2 inch female input square drive
pump, hose, coupler, gauge and adaptor:
STF-56H set with P-392 hand pump
Model Capacity Bolt Hexagon Oil STF-109H set with P-392 hand pump
Number Range Nut Sizes Cap.
STF-109A set with PATG-1102N Turbo II
air hydraulic pump
(ton) (in) (in) (in3)
NC-1319 5 .31 - .50 .50 - .75 .92
NC-1924 10 .50 - .63 .75 - .94 1.22 Model Output Input Torque Output Male
NC-2432 15 .63 - .88 .94 - 1.13 3.66 Number Capacity Torque Ratio Square Drive
NC-3241 20 .88 - 1.13 1.13 - 1.56 4.88 (Ft-lbs) (Ft-lbs) (in)
NC-4150 35 1.13 - 1.38 1.56 - 2.00 9.46 E391 1200 200 6:1 ¾
NC-5060 50 1.38 - 1.50 2.00 - 2.25 14.64 Model Capacity Max. Stud Stroke E392 2200 162 13.6 : 1 1
NC-6075 90 1.50 - 1.88 2.38 - 2.88 30.00 Number Flange Size E393 3200 173 18.5 : 1 1
NS-7080 103.2 1.75 - 2.00 2.75 - 3.13 23.00 Thickness E492 2200 162 13.6 : 1 1
NS-70105 103.2 1.75 - 2.75 2.75 - 4.25 23.00 (ton) (in) (in) (in) E493 3200 173 18.5 : 1 1
NS-110115 192.5 2.75 - 3.00 4.25 - 4.63 50.00 FS-56 5 2 x 2.25 .75 - 1.13 1.50 E494 5000 189 26.5 : 1 1½
NS-110130 192.5 2.75 - 3.50 4.25 - 5.38 50.00 FS-109 10 2 x 3.63 1.25 - 1.63 2.13 E495 8000 154 52 : 1 1½

12 © 2015 Enerpac, All Rights Reserved

 Enerpac Professional Bolting Tools
RIGID STEEL HYDRAULIC TORQUE WRENCHES
Torque
Calculation Engine
ENERPAC'S Bolting Calculator is our free
web-based calculator designed to technically
support our products. The software will
calculate as well as recommend bolt load/
stresses for your bolted applications. You may
choose between torque or tension as your
tightening method and all calculations
include hydraulic tool pressures based on
SQUARE DRIVE TORQUE WRENCHES LOW-PROFILE HEXAGON WRENCHES tool selection.
• Compact, high-strength uni-body • Superior strength to size ratio provides easy
construction provides a small operating access to difficult to reach applications Calculation Features
radius without sacrificing endurance without sacrificing endurance
• 35° rotation angle and rapid return stroke • Fast release drive unit enables rapid • ANSI B16.5 & B16.47 Flanges
for fast operation exchange of cassettes, no tools required
• Constant torque output provides accuracy • Constant torque output provides accuracy • API 6A & 17D Flanges
of +/-3% across full stroke of +/-3% across full stroke • Custom Calculations
• All X-Edition tools are CE-ATEX declared • All X-Edition tools are CE-ATEX declared
Customer Support Features
• Access to Technical Documents
Model Socket Size Square Max. Drive Unit Hexagon Maximum
• Engineering Inquiry Section
Number Range * Drive Torque Model No. Cassette Range Torque
(in) (mm) (in) (Ft-lbs) (in) (mm) (Ft-lbs) • Procedures and Guidance
S1500X ¾- 2 19 - 50 ¾ 1440 W2000X 11⁄16 - 2⅜ 30 - 60 2040
S3000X ¾ - 3⅞ 19 - 100 1 3225 W4000X 15•16- 3⅜ 36 - 85 4175
S6000X 17•16 - 4⅝ 36 - 115 1½ 6150 W8000X 1⅞ - 4⅛ 50 - 105 8470
S11000X 17•16 - 4⅝ 36 - 115 1½ 11,175 W15000X 27/16 - 4⅝ 65 - 115 15,330
Log on to the bolting calculator
S25000X 27•16 - 6⅛ 65 - 155 2½ 25,150 W22000X 215/16- 5⅜ 75 - 135 22,500 at www.enerpac.com
* See our BSH-Series heavy-duty sockets at www.enerpac.com. W35000X 3⅛ - 6⅛ 80 - 155 35,000

PNEUMATIC TORQUE WRENCHES ULTRASLIM CASSETTES BOLT TENSIONERS

PTW-SERIES, PNEUMATIC TORQUE WRENCHES W-SERIES, ULTRASLIM BI-HEXAGONAL CASSETTES HYDRAULIC BOLT TENSIONERS
• High speed continuous rotation for constant • Lean, stepped width design allows tool to be • Maximum operating pressure: 21,750 psi
torque output mounted over bolts where other tools won’t fit (1500 bar)
• Ergonomic, low vibration design reduces • Premium components provide best-in-class • Twin ports for quick connection of multiple tools
fatigue and the risk of vibration related injuries endurance compared to other limited • For available adapter kits and additional
for the operator access tools technical details visit www.enerpac.com
• Provided with standard reaction arm; wide • Uses same drive unit as standard cassettes
assortment of custom arms and accessories
are available

Cassette Hexagon Size Maximum Torque

Model @ 10,000 psi Threaded Load Cell Cylinder Load
Number (in) (mm) (Ft-lbs) Fastener and Effective Cap.
Range Bridge Area
Model Max. Square RPM W2113SL 113/16 46 2000
(in) (mm) Reference (in2) (ton)
Number* Torque Drive W2203SL 23/16 55 2000
(Ft-lbs) (in) W2206SL 2⅜ 60 2000 ⅝-1 M16-M30 GT1-LCB 2.32 25.2
W4203SL 23/16 55 4300 1⅛-1½ M30-M39 GT2-LCB 4.15 45.1
PTW1000C 1000 1 12.6
W4206SL 2⅜ 60 4300 1½-2 M39-M52 GT3-LCB 7.95 86.4
PTW2000C 2000 1 8.0 2-2½ M52-M68 15.16 164.9
W4209SL 29/16 65 4300 GT4-LCB
PTW3000C 3000 1 3.1 W4212SL 2¾ 70 4300 2½-3¼ M68-M80 GT5-LCB 23.37 254.1
PTW6000C 6000 1½ 2.5 W4215SL 215/16 75 4300 3¼- 3¾ M80-M95 GT6-LCB 29.41 319.8
* To order without FRL and hose, remove “C” Suffix (e.g. PTW3000).

www.enerpac.com ® 13
 Enerpac Professional Bolting Tools
TORQUE WRENCH PUMPS

Enerpac
Bolting Service ZU4 ELECTRIC TORQUE WRENCH PUMPS TQ700 ELECTRIC TORQUE WRENCH PUMP
• High efficiency Universal Motor draws lower • Optimized flow technology delivers up to
• On-site demonstrations of Enerpac amps for superior performance in remote 50% faster bolting than competing pumps
bolting tools locations • Compact and lightweight design fits
• Two-speed operation and high by-pass pressure through tight openings and provides easy
• Repair and calibration services reduces cycle time for improved productivity handling
• Composite shroud with integrated carrying • Built-in protection for controls and gauge
• Training for the safe and efficient use handle for easy transportation for job-site durability
of Enerpac bolting tools • IP55 rating for superior dust and water
ZA4 AIR DRIVEN TORQUE WRENCH PUMP protection
• Two-speed operation and high by-pass pressure
Offering full bolting tool service and maintenance reduces cycle time for improved productivity
wherever you need it. We provide you with • Heat exchanger cools oil and warms exhaust air
personalized bolting demonstrations and to prevent freezing
training, and the bolting service vehicle is
equipped to perform torque wrench and other Model Max. Useable Motor Air
equipment calibrations and repairs on site. We Number Pressure Oil Cap. Voltage Pressure
(psi) (gal) (VAC) (psi) Model Max. Useable Motor Motor
can give you advice on the best solutions and
ZU4204BB-QH 10,000 1.00 115 — Number Pressure Oil Cap. Voltage Power
the bolting tools that are most suited to your
ZU4208BB-QH 10,000 2.00 115 — (psi) (gal) (V - Ph - Hz) (hp)
application, thus enabling safe and controlled
ZA4204TX-Q 10,000 1.00 — 60-100 TQ700B 10,000 1.00 115-1-50/60 1
performance of your bolting activities. TQ700I 10,000 1.00 230-1-60 1
ZA4208TX-Q 10,000 1.75 — 60-100
* ZU4: 1.7 hp universal motor, 115 V-1 phase.
Schedule a Bolting Service ZA4: Air consumption 20-100 scfm.

Van Demonstration
TORQUE WRENCH PUMPS TENSIONER PUMPS
Use the distributor search on the web
at www.enerpac.com to find the nearest
Enerpac bolting service van to schedule a
demonstration. These distributors display
the bolting service icon.

PORTABLE ELECTRIC TORQUE WRENCH PUMP ZUTP ELECTRIC TENSIONER PUMP

• Powerful two-speed pump is lightweight • High efficiency Universal Motor draws
and easy to carry lower amps for superior performance in
• Standard heat exchanger package keeps remote locations
pump cool under extreme use • Panel mounted 6-inch pressure gauge,
• Universal motor for a high power-to- with polycarbonate cover for improved
weight ratio; generates full pressure on visibility and safety
as little as 50% of the rated line voltage • User adjustable valve for safe and precise
pressure control
ATP AIR DRIVEN TENSIONER PUMP
• Compact, lightweight, rugged steel frame for
protection and easy handling
• User adjustable valve for safe and precise
pressure control
Model Number Max. Useable Motor
Pressure Oil Cap. Voltage Model Max. Useable Motor Air
(psi) (gal) (VAC) Number Pressure Oil Cap. Voltage Pressure
PMU-10427-Q 10,000 .50 115 (psi) (gal) (VAC) (psi)
PMU-10447-Q 10,000 1.0 115 ZUTP-1500B 21,750 1.00 115 —
PMU-10422-Q 10,000 .50 230 ZUTP-1500I 21,750 1.00 230 —
PMU-10442-Q 10,000 1.0 230 ATP-1500 21,750 1.00 — 80-90
* ATP air consumption 70 sfcm.
14 © 2015 Enerpac, All Rights Reserved
 Integrated Solutions ­– Heavy Lifting­­
Integrated Solutions
Heavy Lifting
Enerpac's Integrated Solutions provide high
force system solutions to meet customer
requirements for safe, precise control of
movement and positioning.

With more than 50 years of experience,

Enerpac has gained unique expertise in
delivering hydraulic solutions for the controlled
movement and positioning of structures.

Contact Enerpac on Integrated Solutions Hydraulic Gantries Strand Jacks

at www.enerpac.com. Heavy lifting systems that offer control and Strand jack systems that provide fully
stability, even in confined spaces. controlled precise lifting.

Skidding System Self-Propelled Modular Trailer (SPMT)

A system comprised of a series of skid-shoes A trailer with a slim design to transport large
powered by hydraulic push-pull cylinders, and heavy objects.
traveling over a pre-constructed track.

BLS-Series, Hydraulic Stage-Lift Cylinders SHS-Series, SyncHoist EVO-Series Synchronous Lifting Systems
Double-acting cylinders with solid plunger Accurate hoisting and load positioning system High-pressure hydraulics combined with
design allows for a load to be lifted many to enhance a crane's capability. computer-controlled monitoring systems for
times the stroke of the cylinder. precise lifting applications.

www.enerpac.com ® 15
 Australia and New Zealand Southeast Asia, Hong Kong and Taiwan
Actuant Australia Ltd. Actuant Asia Pte Ltd.
T +61 297 438 988 – F +61 297 438 648 T +65 68 63 0611 – F +65 64 84 5669
Toll Free:
Brazil T +1800 363 7722
Power Packer do Brasil Ltda.
T +55 11 5687 2211 South Korea
Toll Free: 0800 891 5770 Actuant Korea Ltd.
T +82 31 434 4506 – F +82 31 434 4507
China
Actuant (China) Industries Co.Ltd. Spain and Portugal
T +86 0512 5328 7500 ENERPAC SPAIN, S.L.
F +86 0512 5335 9690 T +34 91 884 86 06 – F +34 91 884 86 11
Toll Free:
T +86 400 885 0369 Sweden, Denmark, Norway,
Finland and Iceland
France, Switzerland, North Africa and Enerpac Scandinavia AB
French speaking African countries T +46 (0) 771 415000
ENERPAC
Une division d’ACTUANT France S.A.S. The Netherlands, Belgium, Luxembourg,
T +33 1 60 13 68 68 – F +33 1 69 20 37 50 Central and Eastern Europe, Baltic States,
Greece, Turkey and CIS countries
Germany and Austria ENERPAC B.V.
ENERPAC GmbH T +31 318 535 911 – F +31 318 535 848
T +49 211 471 490 – F +49 211 471 49 28
Enerpac Integrated Solutions B.V.
India T +31 74 242 20 45 – F +31 74 243 03 38
Enerpac Hydraulics (India) Pvt. Ltd.
T +91 80 3928 9000 South Africa and other
English speaking African countries
Italy ENERPAC AFRICA ( PTY ) Ltd.
ENERPAC S.p.A. T 0027 (0) 12 940 0656
T +39 02 4861 111 – F +39 02 4860 1288
United Kingdom and Ireland
Japan ENERPAC Ltd.
Applied Power Japan LTD KK T +44 11670 5016 50 – F +44 1670 5016 51
T +81 48 662 4911 – F +81 48 662 4955
USA, Latin America and Caribbean
Middle East, Egypt and Libya ENERPAC
ENERPAC Middle East FZE T +1 262 293 1600 – F +1 262 293 7036
T +971 4 8872686 – F +971 4 8872687
User inquiries: +1 800 433 2766
Russia Distributor inquiries/orders:
Rep. office Enerpac T +1 800 558 0530
T +7 495 98090 91 – F +7 495 98090 92 F +1 800 628 0490

030109710-429_US © 2015 Enerpac - Subject to change without notice.