Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 51 views

    Fuel Injection Pump: Specifications

    Uploaded by

    sxturbo
    This document provides specifications and instructions for a C2.2 marine generator set engine, including details about the fuel injection pump, torque specifications for installation, and shim thickness for adjusting pump timing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Fuel Injection Pump: Specifications

    Uploaded by

    sxturbo
    51 views2 pages
    This document provides specifications and instructions for a C2.2 marine generator set engine, including details about the fuel injection pump, torque specifications for installation, and shim thickness for adjusting pump timing.

    Original Description:

    cat c2.2

    Original Title

    Fuel Pump

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications and instructions for a C2.2 marine generator set engine, including details about the fuel injection pump, torque specifications for installation, and shim thickness for adjusting pump timing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    51 views2 pages

    Fuel Injection Pump: Specifications

    Uploaded by

    sxturbo
    This document provides specifications and instructions for a C2.2 marine generator set engine, including details about the fuel injection pump, torque specifications for installation, and shim thickness for adjusting pump timing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    C2.2 Marine-Generator Set Engine JAW00001-UP POWERED BY C2.2 Engine(SEB...

    Page 1 of 2

    Shutdown SIS

    Previous Screen

    Product: GENERATOR SET


    Model: C2.2 GENERATOR SET JAW
    Configuration: C2.2 Marine-Generator Set Engine JAW00001-UP POWERED BY C2.2 Engine

    Specifications
    C1.5 and C2.2 Engines for Caterpillar Built Marine Generator Sets
    Media Number -RENR2442-02 Publication Date -01/01/2006 Date Updated -23/01/2006

    i01576125

    Fuel Injection Pump


    SMCS - 1251; 1290

    S/N - JAW1-UP

    S/N - SAG1-UP

    S/N - SAK1-UP

    S/N - TAF1-UP

    S/N - TAG1-UP

    Illustration 1 g00819040

    Type of fuel injection pump ... In-line cassette

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 30/07/2020
    C2.2 Marine-Generator Set Engine JAW00001-UP POWERED BY C2.2 Engine(SEB... Page 2 of 2

    Direction of rotation of the camshaft for the fuel injection pump ... Clockwise from the drive end

    (1) Tighten the union nut that connects the low pressure fuel line to the fuel injection pump to the
    following torque. ... 2.5 N·m (22 lb in)

    (2) Tighten the mounting nuts to the following torque. ... 15 N·m (11 lb ft)

    (3) Tighten the four delivery valve holders to the following torque. ... 42 N·m (31 lb ft)

    (4) Shim

    (5) Tighten the mounting bolts to the following torque. ... 15 N·m (11 lb ft)

    The shim adjusts the timing of the fuel injection pump. A thicker shim retards the timing. A
    thinner shim advances the timing. The timing changes one degree for each 0.10 mm (0.004 inch)
    difference in the thickness of the shim. More than one shim can be used. If the fuel injection pump
    is reinstalled, a new shim, which is the same thickness as the original shim, must be installed.

    If any of the following new components are installed, a new shim which has a thickness of 0.5 mm
    (0.020 inch) must be used in order to correctly adjust the timing of fuel injection.

    • Camshaft

    • Cylinder block

    The following thicknesses of shims are available:

    • 0.10 mm (0.004 inch)

    • 0.20 mm (0.008 inch)

    • 0.30 mm (0.012 inch)

    • 0.40 mm (0.016 inch)

    • 0.50 mm (0.020 inch)

    Copyright 1993 - 2020 Caterpillar Inc. Thu Jul 30 09:45:34 UTC+0100 2020
    All Rights Reserved.
    Private Network For SIS Licensees.

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 30/07/2020

    You might also like