®

brands you trust.

CRANE® REVO® - Pneumatic Rack and Pinion Actuators

www.craneenergy.com
Design Features and Benefits

1) Standardized actuator to valve interface per DIN ISO 5211 (not visible)
2) Standardized accessory interfaces per VDI/VDE 3845 (NAMUR)
3) Position indicator per NAMUR standard
4) Torque capability exceeding 100,000 in-lbs
5) Aluminum body with anodized surfaces for superior corrosion protection inside and out
6) Blowout-proof pinion and bushings, no exterior corrosion-susceptible snap rings
7) Self-lubricating piston guide bands are positioned to prevent piston movement while providing minimal
side friction and higher actuator efficiencies
8) Clustered springs are designed for easy and safe conversion (springs not shown)
9) Stainless steel end cap fasteners
10) Maximized gear tooth engagement
11) Large air passages provide for a maximized speed of operation
12) Most popular sizes have travel stops in both clockwise and counterclockwise positions as standard
13) Complete rebuild capability with soft-part replacement (not visible)

5 10 3 6 2 7

12 12

9 7 1 2 11

www.craneenergy.com
 Double Acting Torques

Crane® Revo® DOUBLE ACTING TORQUE (in-lbs)

Model 40 psig 60 psig 80 psig 100 psig 120 psig
CRD001 25 37 49 61 N/A*
CRD002 64 96 128 160 N/A*
CRD006 152 227 303 378 N/A*
CRD012 301 451 602 752 903
CRD025 586 878 1171 1464 1757
CRD050 1082 1622 2163 2704 3245
CRD090 2058 3086 4115 5144 6173
CRD130 3131 4697 6263 7828 9394
CRD180 4116 6173 8231 10289 12347
CRD205 6167 9251 12334 15418 18501
CRD380 9256 13883 18511 23139 27767
CRD630 15418 23127 30836 38545 46254
CRD960 23416 35124 46832 58540 70248
CRDH15 35844 53765 71687 89609 107531
Notes:
All torque values are inch-pounds for pressure supply listed.
Recommended Safety Factor = 10% for double acting actuators.
* Max Pressure 100 psig.
Crane® Revo® SPRING RETURN TORQUE (in-lbs)
Spring 40 psig 60 psig 80 psig 100 psig 120 psig
Spring Quantity
Start End Start End Start End Start End Start End Start End
02 18 9 56 47 88 79 120 111 152 143 N/A* N/A*
CRS/CRA002

04 35 18 47 30 79 62 111 94 143 126 N/A* N/A*

06 53 26 71 49 103 76 135 108 N/A* N/A*
08 69 34 63 27 95 59 127 91 N/A* N/A*
10 87 43 54 10 86 42 118 74 N/A* N/A*
12 104 52 77 25 109 57 N/A* N/A*

02 39 20 132 113 208 188 283 264 359 340 N/A* N/A*
CRS/CRA006

04 78 39 113 74 188 149 264 225 340 301 N/A* N/A*

06 121 61 167 107 243 182 318 258 N/A* N/A*
08 162 81 147 66 222 142 298 217 N/A* N/A*
10 200 100 203 103 278 178 N/A* N/A*
12 239 120 183 64 259 140 N/A* N/A*

02 73 36 265 228 415 379 565 529 716 680 866 830
CRS/CRA012

04 145 73 228 156 379 306 529 457 680 607 830 757
06 218 109 192 83 342 234 493 384 643 534 794 685
08 290 145 306 161 457 311 607 462 757 612
10 363 181 207 88 420 239 571 389 721 540
12 435 218 384 166 534 317 685 467
14 508 254 348 94 498 244 649 395
02 142 71 515 444 808 737 1100 1030 1393 1322 1686 1615
CRS/CRA025

04 283 142 444 302 737 595 1030 888 1322 1181 1615 1474
06 425 212 373 161 666 454 959 746 1252 1039 1544 1332
08 566 283 595 312 888 605 1181 898 1474 1190
10 708 354 524 170 817 463 1110 756 1403 1049
12 850 425 746 322 1039 614 1332 907
14 991 496 676 180 968 473 1261 766
02 259 130 952 822 1493 1363 2034 1904 2574 2445 3115 2985
CRS/CRA050

04 519 259 822 563 1363 1104 1904 1644 2445 2185 2985 2726
06 778 389 692 303 1233 844 1774 1385 2315 1926 2856 2467
08 1038 519 1104 585 1644 1125 2185 1666 2726 2207
10 1297 649 974 325 1515 866 2055 1407 2596 1948
12 1557 778 1385 606 1926 1147 2467 1688
14 1816 908 1255 347 1796 888 2337 1429
Notes:
All torque values are inch-pounds for pressure supply listed.
Torque values are the same for both Spring Fail Clockwise, FCW (REVO® style S) and Counterclockwise, FCCW (REVO® style A).
Recommended Safety Factor = 20% for single acting actuators.
* Max Pressure 100 psig.

www.craneenergy.com
Spring Return Torques

Crane® Revo® SPRING RETURN TORQUE (in-lbs) continued

Spring 40 psig 60 psig 80 psig 100 psig 120 psig
Spring Quantity
Start End Start End Start End Start End Start End Start End
02 474 237 1820 1583 2849 2612 3878 3641 4907 4670 5936 5699
CRS/CRA090

04 949 474 1583 1109 2612 2138 3641 3167 4670 4195 5699 5224
06 1423 712 1346 635 2375 1663 3404 2692 4433 3721 5461 4750
08 1897 949 2138 1189 3167 2218 4195 3247 5224 4276
10 2372 1186 1901 715 2929 1744 3958 2772 4987 3801
12 2846 1423 2692 1269 3721 2298 4750 3327
14 3321 1660 2455 795 3484 1824 4513 2852

02 719 359 2772 2413 4338 3978 5903 5544 7469 7110 9034 8675
CRS/CRA130

04 1437 719 2413 1694 3978 3260 5544 4825 7110 6391 8675 7957
06 2156 1078 2053 975 3619 2541 5185 4107 6750 5672 8316 7238
08 2847 1437 3260 1822 4825 3388 6391 4954 7957 6519
10 3593 1797 2900 1104 4466 2669 6032 4235 7597 5801
12 4312 2156 4107 1951 5672 3516 7238 5082
14 5030 2515 3747 1232 5313 2798 6879 4363

02 945 473 3643 3170 5701 5228 7759 7286 9816 9344 11874 11401
CRS/CRA180

04 1890 945 3170 2225 5228 4283 7286 6341 9344 8399 11401 10456
06 2836 1418 2698 1280 4756 3338 6813 5396 8871 7453 10929 9511
08 3781 1890 4283 2393 6341 4450 8399 6508 10456 8566
10 4726 2363 3810 1447 5868 3505 7926 5563 9984 7621
12 5671 2836 5396 2560 7453 4618 9511 6676
14 6616 3308 4923 1615 6981 3673 9039 5730

02 1490 745 5422 4677 8505 7760 11589 10844 14673 13927 17756 17011
CRS/CRA205

04 2981 1490 4677 3186 7760 6270 10844 9354 13927 12437 17011 15521
06 4471 2236 3932 1696 7015 4780 10099 7863 13182 10947 16266 14030
08 5961 2981 6270 3289 9354 6373 12437 9456 15521 12540
10 7452 3726 5525 1799 8608 4883 11692 7966 14775 11050
12 8942 4471 7863 3392 10947 6476 14030 9559
14 10432 5216 7118 1902 10202 4985 13285 8069

02 2237 1119 8137 7018 12765 11646 17393 16274 22020 20902 26648 25530
CRS/CRA380

04 4475 2237 7018 4781 11646 9409 16274 14037 20902 18665 25530 23292
06 6712 3356 5900 2544 10528 7172 15155 11799 19783 16427 24411 21055
08 8949 4475 9409 4934 14037 9562 18665 14190 23292 18818
10 11186 5593 8290 2697 12918 7325 17546 11953 22174 16581
12 13424 6712 11799 5088 16427 9715 21055 14343
14 15661 7830 10681 2850 15309 7478 19936 12106

02 3728 1864 13554 11690 21263 19400 28972 27109 36681 34818 44391 42527
CRS/CRA630

04 7455 3728 11690 7963 19400 15672 27109 23381 34818 31090 42527 38799
06 11183 5591 9827 4235 17536 11944 25245 19653 32954 27362 40663 35071
08 14910 7455 15672 8217 23381 15926 31090 23635 38799 31344
10 18638 9319 13808 4489 21517 12198 29226 19907 36935 27616
12 22366 11183 19653 8471 27362 16180 35071 23889
14 26093 13047 17790 4743 25499 12452 33208 20161
03 5591 2796 20620 17825 32328 29532 44036 41240 55744 52948 67452 64656
CRS/CRA960

06 11183 5591 17825 12233 29532 23941 41240 35649 52948 47357 64656 59065
09 16774 8387 15029 6642 26737 18350 38445 30058 50153 41766 61861 53474
12 22366 11183 23941 12758 35649 24466 47357 36174 59065 47882
15 27957 13979 21145 7167 32853 18875 44561 30583 56269 42291
18 33549 16774 30058 13283 41766 24991 53474 36699

02 8663 4331 31512 27181 49434 45103 67356 63024 85278 80946 103199 98868
CRS/CRAH15

04 17325 8663 27181 18518 45103 36440 63024 54362 80946 72284 98868 90205
06 25988 12994 22849 9855 40771 27777 58693 45699 76615 63621 94537 81543
08 34651 17325 36440 19114 54362 37036 72284 54958 90205 72880
10 43314 21657 32109 10452 50030 28374 67952 46295 85874 64217
12 51976 25988 45699 19711 63621 37633 81543 55554
14 60639 30320 41368 11048 59289 28970 77211 46892

Notes: All torque values are inch-pounds for pressure supply listed. Torque values are the same for both Spring Fail Clockwise, FCW (REVO® style S) and
Counterclockwise, FCC (REVO® style A). Recommended Safety Factor = 20% for single acting actuators.

www.craneenergy.com
 Dimensions

Sizes CRD001, CRS002 and CRS006

¼" NPT (CCW)

Dimensions are in inches and millimeters. Dimensions are nominal.

For certified drawings, please contact factory.

DIMENSION CHART, Revo® CRD001-CRS/CRA180 RACK & PINION ACTUATORS

Size Units L G H B C D E R S T ISO SQ
Inches 3.62 0.79 1.77 1.79 0.81 1.97 0.98 1.42 0.28 0.35
CRD001 M5 F03
mm 92 20 45 45.5 20.5 50 25 36 7 9
CRS002/ Inches 5.59 0.79 2.15 1.89 1.00 1.97 0.98 1.65 0.31 0.43
CRA002 M5 F04
mm 142 20 54.5 48 25.4 50 25 42 8 11
CRS006/ Inches 6.81 0.79 2.93 2.22 1.36 3.15 1.18 1.97 0.39 0.55
CRA006 M6 F05
mm 173 20 74.5 56.5 34.5 80 30 50 10 14
CRS012/ Inches 10.43 0.79 3.58 2.66 1.61 3.15 1.18 1.97 0.35 0.55
CRA012 M6 F05
mm 265 20 91 67.5 41 80 30 50 9 14
CRS025/ Inches 11.42 0.79 4.76 3.23 2.17 3.15 1.18 1.97 0.35 0.55
CRA025 M6 F05
mm 290 20 121 82 55 80 30 50 9 14
CRS050/ Inches 14.37 0.79 5.75 3.70 2.64 3.15 1.18 2.76 0.49 0.67
CRA050 M8 F07
mm 365 20 146 94 67 80 30 70 12.5 17
CRS090/ Inches 17.72 1.18 6.54 4.29 3.07 5.12 1.18 4.02 0.63 0.87
CRA090 M10 F10
mm 450 30 166 109 78 130 30 102 16 22
CRS130/ Inches 20.67 1.18 7.56 4.53 3.54 5.12 1.18 4.92 0.71 1.06
CRA130 M12 F12
mm 525 30 192 115 90 130 30 125 18 27
CRS180/ Inches 21.06 1.18 8.58 5.08 4.02 5.12 1.18 4.92 0.71 1.06
M12 F12
CRA180 mm 535 30 218 129 102 130 30 125 18 27

www.craneenergy.com
Dimensions

Actuator / Valve ISO F25

8 Hole Mounting Pattern
Mfg. Bolt Circle: 10.00" (254)
Mfg. Bolt Hole: M16
Mfg. Bolt Hole Depth: 0.98" (25)
(CRS960 has 2 ISO Patterns)

Actuator / Valve ISO F30

8 Hole Mounting Pattern
Mfg. Bolt Circle: 11.73" (298)
Mfg. Bolt Hole: M16
Mfg. Bolt Hole Depth: 0.98" (25)
(CRSH15 has 2 ISO Patterns)

8 Hole Mounting Pattern

Actuator / Valve ISO F30
1/4" NPT (CCW)

Dimensions are in inches and millimeters. Dimensions are nominal.

For certified drawings, please contact factory.

DIMENSION CHART, Revo® CRS/CRA205-CRS/CRAH15 RACK & PINION ACTUATORS

Size Units LD LE H B C D R S T ISO SQ
CRS205/ Inches 15.35 19.29 10.79 5.51 5.35 5.12 5.51 1.06 1.42
CRA205 M16 F14
mm 390 490 274 140 136 130 140 26 36
CRS380/ Inches 19.69 23.62 11.18 5.51 5.35 5.12 6.50 1.02/1.18 1.42/1.81
CRA380 M16 F14/F16
mm 500 600 284 140 136 130 165 26/30 36/46
CRS630/ Inches 21.26 29.13 13.54 6.96 6.88 5.12 6.50 .86 1.81
CRA630 M20 F16
mm 540 740 344 177 175 130 165 22 46
CRS960/ Inches 22.24 30.70 16.54 8.26 8.26 5.91 6.50/10.00 .98 1.81/2.17
CRA960 M20/M16 F16*/F25
mm 565 780 420 210 210 150 165/254 25 46/55
CRSH15/ Inches 28.66 35.03 17.72 8.79 8.79 6.89 10.00/11.73 .98 2.17/2.95
CRAH15 M16/M20 F25/F30
mm 728 890 450 223.5 223.5 175 254/298 25 55/75
LD Length of Double-acting Actuator
LE Length of Spring Return Actuator
* This Model also has ISO F25 Mounting Pattern

www.craneenergy.com
 Materials of Construction

Double Acting: CRD001, CRD002 & CRD006 Double Acting: CRD205 through CRDH15
Item Description Material Item Description Material
1 Body Aluminum Alloy, Extruded 1 Body Aluminum / Painted
2 Piston POM 2 Piston Aluminum / St50K (Gear Teeth)
3 Shaft Aluminum / Anodized 3 Shaft Aluminum / Anodized
4 Right End Cap Aluminum 4 DA End Cap Aluminum / Painted
5 Left End Cap Aluminum 5-7 Bearing POM
6 Screw Stainless Steel 8 Retaining Ring Spring Steel
7 Washer Stainless Steel 9-10 Piston Bearing PTFE, Carbon-filled
8 Indicator Polyamide 11 O-ring - Piston NBR
9 O-ring - Piston Stainless Steel NBR 12 O-ring - End Cap NBR
10 O-ring - Shaft NBR 13 O-ring NBR
11 O-ring - End Cap NBR 14 O-ring - Shaft NBR
12 Bearing PTFE, Carbon-filled 15 Screw Stainless Steel
13 Insert Aluminum / Anodized 16 Washer Stainless Steel

Spring Return Parts

Models 17 Indicator Polyamide
CRS/CRA002 & CRS/CRA006
Models
14 Spring - Outer CrSi Alloy / Coated
Spring Return Parts
CRS/CRA205 - CRS/CRAH15
15 Spring - Inner CrSi Alloy / Coated 18 SR End Cap Aluminum / Painted
19 Spring - CW Wound CrSi Alloy / Coated
20 Spring - CCW Wound CrSi Alloy / Coated

Top Retaining Ring & Bearing

on Models CRS205 through
CRSH15

Bottom Retaining Ring & Bearing on

Model CRS205 only

Spring Return: CRS002 & CRS006 Only 7

Spring Return: CRS205 through CRSH15

www.craneenergy.com
Materials of Construction

Double Acting: CRD012 through CRD180

Item Description Material
1 Body Aluminum / Anodized
2 Piston "Open" Aluminum
3 Piston "Closed" Aluminum
4 Shaft Aluminum / Anodized
5 End Cap Aluminum / Painted
6-8 Bearing POM
9 Retaining Ring Spring Steel
10 Piston Bearing PTFE, Carbon-filled
11 Piston Bearing PTFE, Carbon-filled
12 O-ring - Piston NBR
13 O-ring - End Cap NBR
14 O-ring - Shaft NBR
15 O-ring NBR
16 Screw Stainless Steel
17 Washer Stainless Steel
18 Indicator Polyamide
19 Protective Cap Polyethylene
20 "Open" Stop Screw Steel / Zinc-plated
21 Sealing Nut Steel / Zinc-plated
22 "Closed" Stop Screw Stainless Steel
23 Shaft - Top Aluminum / Anodized
24 Shaft Screw Steel / Zinc-plated
25 Sealing Nut Steel / Zinc-plated
26 Threaded Insert Stainless Steel
27 Protective Cap Polyethylene
Spring Return: CRS/CRA012 through CRS/CRA180
28 O-ring NBR
29 Stop Screw O-ring NBR
30 Washer POM
31-32 O-ring NBR
33 Washer POM

Spring Return Parts Models CRS/CRA012 - CRS/CRA180

34 Spring - CW Wound CrSi Alloy / Coated

35 Spring - CCW Wound CrSi Alloy / Coated

www.craneenergy.com
 Configurations and Specifications

Crane® Revo® STANDARD MOUNTING CONFIGURATIONS OPTIONAL MOUNTING CONFIGURATIONS

Mounting Optional Mounting Optional
REVO® ISO Metric NAMUR, ISO Order Metric
Configuration Port Config. Port
Model Pattern Bolting WxLxH (mm) Pattern Code Bolting
(bolt circle) (mm) (bolt circle) (mm)
C D001 F03 F03/V9 (36) M5x4 25x50x15¹ 25 (N/A)
C R_002 F04 F04/V11 (42) M5x4 25x50x20¹ 30 F03 A1 F03/V9 (36) M5x4 25
C R_006 F05 F05/V14 (50) M6x4 30x80x20 35 F04 B1 F04/V11 (42) M5x4 30
C R_012 F05 F05/V14 (50) M6x4 30x80x20 35 (N/A)
C R_025 F05 F05/V14 (50) M6x4 30x80x20 35 (N/A)
C R_050 F07 F07/V17 (70) M8x4 30x80x20 + 30x130x20 55 (N/A)
C R_090 F10 F10/V22 (102) M10x4 30x130x30 70 F07 D1 F07/V17 (70) M8x4 55
C R_130 F12 F12/V27 (125) M12x4 30x130x30 85 F10 E1 F10/V22 (102) M10x4 70
C R_180 F12 F12/V27 (125) M12x4 30x130x30 85 (N/A)
C R_205 F14 F14/V36 (140) M16x4 30x130x30 100 F12 F1 F12/V27 (125) M12x4 85
F14 G1 F14/R45¹ (140) M16x4 100
C R_380 F14 F14/V36 (140) M16x4 30x130x30 100 F12 F1 F12/V27 (125) M12x4 85
F14 G1 F14/R45¹ (140) M16x4 100
C R_630 F16 F16/V46 (165) M20x4 30x130¹x30 130 F14 G2 F14/V36 (140) M16x4 100
F16 H1 F16/R70¹ (165) M20x4 130
C R_960 F16² F16/V46 (165) M20x4 30x150¹x30 130 F25² J4 F25/V55 (254) M16x8 130¹
+F25/V46 (254) M16x8 +F16/V55 (165) M20x4
(CR_960 is standard with two mounting bolt circles) F30 K1 F30/V75 (298) M20x8 130¹

C R_H15 F25 F25/V55 (254) M16x8 30x175¹x30 130¹

Notes: 1) Indicates that this dimension is a non-standard ISO or NAMUR dimension for that particular pattern. 4) _= Function;
2) Standard and Optional configuration includes two mounting bolt circles. D = Double Acting, S = Spring to Close,
3) V = Square, R = Round A = Spring to Open

Crane® Revo® SPECIFICATIONS
Air Travel Operating Operating
REVO® Weight in lbs (kg) Connection Adjustability Pressure Range
Model Size Range in psi (bar) Temperature Range

DA SR NPT Max Min Pos 1 Pos 2 Min Max Min Max

C D001 0.7 (0.3) N/A 36 145
C R_002 1.10 (0.5) 1.10 (0.5) 1/4" 90° 0° 82° to 90° (2.5) (10)
C R_006 2.09 (.95) 2.20 (1.0)
C R_012 4.9 (2.2) 5.07 (2.3)
C R_025 7.7 (3.5) 8.4 (3.8)
C R_050 13.0 (5.9) 14.66 (6.7)
98° 74° -4° to 8° 82° to 94°
C R_090 22.9 (10.4) 26.9 (12.2) -4°F 176°F
C R_130 41.9 (19.0) 46.29 (21.0)
29 145 (-20°C) (80°C)
C R_180 49.6 (22.5) 55.77 (25.3) 1/4"
(2) (10)
C R_205 66.2 (30.0) 72.75 (33.0)
C R_380 76.05 (34.5) 85.97 (39.0)
C R_630 99.20 (45.0) 119.04 (54.0) 90° 0° 90°
C R_960 138.88 (63.0) 164.20 (74.5)
C R_H15 168.43 (76.4) 199.29 (90.4)

www.craneenergy.com
Accessories and Product Overview

CCr Series – economical – General Purpose

• Engineered resin housing
• 3D position indicator
• Designed for use in NEMA 4, 4x environments
• General purpose and intrinsically safe options
• Mechanical or inductive switches

CCa Series – Conventional w/Multiple options

• Epoxy-coated aluminum or stainless steel housing
• 3D, Disk, or no position indication
• NEMA 4, 4x, Class I Division 2, and intrinsically safe
• Mechanical, proximity, or inductive switches
• World’s first wireless option
• Three position dribble control option
• Four to 20 mA feedback transmitter option
• actuator Sensor interface option ASinterface

CXa Series – explosion Proof

• Epoxy-coated aluminum housing
• 3D position indicator
• NEMA 4, 4x, 7, and 9
• Non-incentive and intrinsically safe options
• Mechanical, proximity, or inductive switches
• Three position dribble control option
• Four to 20 mA feedback transmitter option
• actuator Sensor interface option ASinterface

C100 Series – Positioners for revo®

• Single cast aluminum housing for all types
– Pneumatic (C100P)
– Electro-pneumatic (C100E)
– Explosion proof (C100EX)
• Powder-polyester coated housing
• Stainless steel, retained fasteners
• NEMA 4x and IP66 protection
• Available drives: NAMUR, 1/2" square and others
• Maintenance-friendly pilot valve
• Simple calibration – external zero adjustment

Solenoids
Any manufacturer's solenoid can be mounted. Please provide the
model number when ordering.

CRANE® Sizing Program REVO Pneumatic Actuators

®

• Build Projects • Quick Actuator Sizing Common Engineering Simplified Valve Flow Sizing
• Quote Projects • ISA Style Data Sheets Performance Calculations for Liquids, Gasses, Steam
• Multiple Valve Sizing
10

www.craneenergy.com
 How to Specify

Standard Actuator Configurations Special Actuator Configurations

Part Number Part Number

C R D 0 1 2 0 0 B 00 00 0

Series Miscellaneous
CR REVO® Actuator 0 Standard
X Specials
Function
D Double Acting Surface Protection
S Spring to Close 00 with Black Glossy End Caps
A Spring to Open (RAL 9005)

Size Temperature
001 00 Standard Nitrile Seals (Buna-N Rubber)
002 LB Low Temperature Seals (EPDM)
006 HB High Temp Seals (Viton®)
012 Refer to Tech. Data Sheets
025
:
H15

Number of Springs
00 Double Acting
01 Spring Return, 1 Spring
02 Spring Return, 2 Springs
03 Spring Return, 3 Springs
:
09 Spring Return, 9 Springs
10 Spring Return, 10 Springs

Travel Stops
A Single Travel Stops (Models 001-006)
B Dual Travel Stops (Model 012-180)
C No Travel Stops (Model 205-H15)
D External Dual Travel Stops (Model 205-H15)
Note: Version B has overtravel (4° off set in pinion and 4° in piston) and limit stops.

Product responsibility
CRANE’s concern for product performance extends to the product’s This information is not intended to be construed as warranties or guarantees,
period of service. We feel it is important for users to also be aware of their expressed or implied, nor imply use applicability, for products or services
responsibilities. Our products are manufactured and used in numerous described herein. We reserve the right to modify or improve the designs
applications with a wide variety of service conditions. While general and specifications of such products at any time without notice. As the
guidelines are often furnished, it is not possible to provide complete manufacturer, CRANE sells its products and services pursuant to its
and specific performance data for every conceivable service condition. standard terms and conditions of sale, including its limited warranty,
Therefore, the end user must assume final responsibility for proper copies of which are available upon request. CRANE limits its liability
evaluation, application, and performance of all products. The contents of specifically to the replacement or repair of defective items, or to a
this document are presented for information purposes only. Every effort has refund for same. CRANE does not accept liability for any incidental or
been made to ensure accuracy. consequential damages.
11

www.craneenergy.com
 ®

CRANE Energy Flow Solutions®

CRANE Energy Global Headquarters CRANE REVO Customer Service

4526 Research Forest Drive, Suite 400 3671 New Town Boulevard
The Woodlands, Texas 77381 U.S.A. St. Charles, Missouri 63301
Tel.: (1) 936-271-6500 Tel.: (1) 636-688-8750
Fax.: (1) 936-271-6510 Fax.: (1) 636-688-8755
www.craneenergy.com

www.flowoffluids.com
EG-RV-CT-EN-L16-20-1110 (CV-204)

NUCLEAR
®

Crane Co., and its subsidiaries cannot accept responsibility for possible errors in catalogues, brochures, other printed materials, and website
information. Crane Co. reserves the right to alter its products without notice, including products already on order provided that such
alteration can be made without changes being necessary in specifications already agreed. All trademarks in this material are property of the
Crane Co. or its subsidiaries. The Crane and Crane brands logotype (Aloyco®, Center Line®, Compac-Noz®, Crane®, Duo-Chek®, Flowseal®,
Jenkins®, Krombach®, Noz-Chek®, Pacific Valves®, Stockham®, Triangle®, Uni-Chek®) are registered trademarks of Crane Co. All rights reserved.

© 2011 CRANE Energy Flow Solutions, www.craneenergy.com