6.

SYSTEM TESTING
The purpose of testing is to discover errors. Testing is the process of trying to discover
every conceivable fault or weakness in a work product. It provides a way to check the
functionality of components, sub assemblies, assemblies and/or a finished product It is the
process of exercising software with the intent of ensuring that the
Software system meets its requirements and user expectations and does not fail in an
unacceptable manner. There are various types of test. Each test type addresses a specific testing
requirement.
TYPES OF TESTS
Unit testing
Unit testing involves the design of test cases that validate that the internal program logic is
functioning properly, and that program inputs produce valid outputs. All decision branches and
internal code flow should be validated. It is the testing of individual software units of the
application .it is done after the completion of an individual unit before integration. This is a
structural testing, that relies on knowledge of its construction and is invasive. Unit tests perform
basic tests at component level and test a specific business process, application, and/or system
configuration. Unit tests ensure that each unique path of a business process performs accurately
to the documented specifications and contains clearly defined inputs and expected results.
Integration testing

Integration tests are designed to test integrated software components to determine if they
actually run as one program. Testing is event driven and is more concerned with the basic
outcome of screens or fields. Integration tests demonstrate that although the components were
individually satisfaction, as shown by successfully unit testing, the combination of components is
correct and consistent. Integration testing is specifically aimed at exposing the problems that
arise from the combination of components.
Functional test
Functional tests provide systematic demonstrations that functions tested are available as
specified by the business and technical requirements, system documentation, and user manuals.
Functional testing is centered on the following items:
Valid Input : identified classes of valid input must be accepted.
Invalid Input : identified classes of invalid input must be rejected.
Functions : identified functions must be exercised.
Output : identified classes of application outputs must be exercised.
Systems/Procedures: interfacing systems or procedures must be invoked.

Organization and preparation of functional tests is focused on requirements, key functions, or

special test cases. In addition, systematic coverage pertaining to identify Business process flows;
data fields, predefined processes, and successive processes must be considered for testing.
Before functional testing is complete, additional tests are identified and the effective value of
current tests is determined.
System Test
System testing ensures that the entire integrated software system meets requirements. It tests a
configuration to ensure known and predictable results. An example of system testing is the
configuration oriented system integration test. System testing is based on process descriptions
and flows, emphasizing pre-driven process links and integration points.
White Box Testing
White Box Testing is a testing in which in which the software tester has knowledge of the
inner workings, structure and language of the software, or at least its purpose. It is purpose. It is
used to test areas that cannot be reached from a black box level.
Black Box Testing
Black Box Testing is testing the software without any knowledge of the inner workings,
structure or language of the module being tested. Black box tests, as most other kinds of tests,
must be written from a definitive source document, such as specification or requirements
document, such as specification or requirements document. It is a testing in which the software
under test is treated, as a black box .you cannot “see” into it. The test provides inputs and
responds to outputs without considering how the software works.
 6.1 Unit Testing:
Unit testing is usually conducted as part of a combined code and unit test phase of the
software lifecycle, although it is not uncommon for coding and unit testing to be conducted as
two distinct phases.

Test strategy and approach

Field testing will be performed manually and functional tests will be written in detail.
Test objectives
 All field entries must work properly.
 Pages must be activated from the identified link.
 The entry screen, messages and responses must not be delayed.

Features to be tested
 Verify that the entries are of the correct format
 No duplicate entries should be allowed
 All links should take the user to the correct page.
6.2 Integration Testing

Software integration testing is the incremental integration testing of two or more

integrated software components on a single platform to produce failures caused by interface
defects.
The task of the integration test is to check that components or software applications, e.g.
components in a software system or – one step up – software applications at the company level –
interact without error.
Test Results: All the test cases mentioned above passed successfully. No defects encountered.
6.3 Acceptance Testing
User Acceptance Testing is a critical phase of any project and requires significant
participation by the end user. It also ensures that the system meets the functional requirements.
Test Results: All the test cases mentioned above passed successfully. No defects encountered.
 SYSTEM TESTING
TESTING METHODOLOGIES
The following are the Testing Methodologies:
o Unit Testing.
o Integration Testing.
o User Acceptance Testing.
o Output Testing.
o Validation Testing.

Unit Testing
Unit testing focuses verification effort on the smallest unit of Software design that is the
module. Unit testing exercises specific paths in a module’s control structure to ensure complete
coverage and maximum error detection. This test focuses on each module individually, ensuring
that it functions properly as a unit. Hence, the naming is Unit Testing.
During this testing, each module is tested individually and the module interfaces are
verified for the consistency with design specification. All important processing path are tested
for the expected results. All error handling paths are also tested.
Integration Testing
Integration testing addresses the issues associated with the dual problems of verification
and program construction. After the software has been integrated a set of high order tests are
conducted. The main objective in this testing process is to take unit tested modules and builds a
program structure that has been dictated by design.
The following are the types of Integration Testing:
1)Top Down Integration
This method is an incremental approach to the construction of program structure.
Modules are integrated by moving downward through the control hierarchy, beginning with the
main program module. The module subordinates to the main program module are incorporated
into the structure in either a depth first or breadth first manner.
In this method, the software is tested from main module and individual stubs are replaced
when the test proceeds downwards.
 2. Bottom-up Integration
This method begins the construction and testing with the modules at the lowest level in
the program structure. Since the modules are integrated from the bottom up, processing required
for modules subordinate to a given level is always available and the need for stubs is eliminated.
The bottom up integration strategy may be implemented with the following steps:

 The low-level modules are combined into clusters into clusters that perform a specific Software
sub-function.
 A driver (i.e.) the control program for testing is written to coordinate test case input and output.
 The cluster is tested.
 Drivers are removed and clusters are combined moving upward in the program
Structure

The bottom up approaches tests each module individually and then each module is module is
integrated with a main module and tested for functionality.
User Acceptance Testing
User Acceptance of a system is the key factor for the success of any system. The system
under consideration is tested for user acceptance by constantly keeping in touch with the
prospective system users at the time of developing and making changes wherever required. The
system developed provides a friendly user interface that can easily be understood even by a
person who is new to the system.
Output Testing
After performing the validation testing, the next step is output testing of the proposed
system, since no system could be useful if it does not produce the required output in the specified
format. Asking the users about the format required by them tests the outputs generated or
displayed by the system under consideration. Hence the output format is considered in 2 ways –
one is on screen and another in printed format.
Validation Checking
Validation checks are performed on the following fields.
Text Field:
The text field can contain only the number of characters lesser than or equal to its size.
The text fields are alphanumeric in some tables and alphabetic in other tables. Incorrect entry
always flashes and error message.
Numeric Field:
The numeric field can contain only numbers from 0 to 9. An entry of any character
flashes an error messages. The individual modules are checked for accuracy and what it has to
perform. Each module is subjected to test run along with sample data. The individually tested
modules are integrated into a single system. Testing involves executing the real data
information is used in the program the existence of any program defect is inferred from the
output. The testing should be planned so that all the requirements are individually tested.
A successful test is one that gives out the defects for the inappropriate data and produces
and output revealing the errors in the system.

Preparation of Test Data

Taking various kinds of test data does the above testing. Preparation of test data plays a
vital role in the system testing. After preparing the test data the system under study is tested
using that test data. While testing the system by using test data errors are again uncovered and
corrected by using above testing steps and corrections are also noted for future use.
Using Live Test Data:
Live test data are those that are actually extracted from organization files. After a system
is partially constructed, programmers or analysts often ask users to key in a set of data from their
normal activities. Then, the systems person uses this data as a way to partially test the system. In
other instances, programmers or analysts extract a set of live data from the files and have them
entered themselves.
It is difficult to obtain live data in sufficient amounts to conduct extensive testing. And,
although it is realistic data that will show how the system will perform for the typical processing
requirement, assuming that the live data entered are in fact typical, such data generally will not
test all combinations or formats that can enter the system. This bias toward typical values then
does not provide a true systems test and in fact ignores the cases most likely to cause system
failure.
Using Artificial Test Data:
Artificial test data are created solely for test purposes, since they can be generated to test all
combinations of formats and values. In other words, the artificial data, which can quickly be
prepared by a data generating utility program in the information systems department, make
possible the testing of all login and control paths through the program.
The most effective test programs use artificial test data generated by persons other than those
who wrote the programs. Often, an independent team of testers formulates a testing plan, using
the systems specifications.
The package “Virtual Private Network” has satisfied all the requirements specified as per
software requirement specification and was accepted.
USER TRAINING
Whenever a new system is developed, user training is required to educate them about the
working of the system so that it can be put to efficient use by those for whom the system has
been primarily designed. For this purpose the normal working of the project was demonstrated to
the prospective users. Its working is easily understandable and since the expected users are
people who have good knowledge of computers, the use of this system is very easy.
MAINTAINENCE
This covers a wide range of activities including correcting code and design errors. To reduce the
need for maintenance in the long run, we have more accurately defined the user’s requirements
during the process of system development. Depending on the requirements, this system has been
developed to satisfy the needs to the largest possible extent. With development in technology, it
may be possible to add many more features based on the requirements in future. The coding and
designing is simple and easy to understand which will make maintenance easier.
TESTING STRATEGY :
A strategy for system testing integrates system test cases and design techniques into a well
planned series of steps that results in the successful construction of software. The testing
strategy must co-operate test planning, test case design, test execution, and the resultant data
collection and evaluation .A strategy for software testing must accommodate low-level tests
that are necessary to verify that a small source code segment has been correctly implemented
as well as high level tests that validate major system functions against user requirements.
Software testing is a critical element of software quality assurance and represents the ultimate
review of specification design and coding. Testing represents an interesting anomaly for the
software. Thus, a series of testing are performed for the proposed system before the system is
ready for user acceptance testing.
SYSTEM TESTING:
Software once validated must be combined with other system elements (e.g. Hardware, people,
database). System testing verifies that all the elements are proper and that overall system
function performance is achieved. It also tests to find discrepancies between the system and its
original objective, current specifications and system documentation.
UNIT TESTING:
In unit testing different are modules are tested against the specifications produced during the
design for the modules. Unit testing is essential for verification of the code produced during the
coding phase, and hence the goals to test the internal logic of the modules. Using the detailed
design description as a guide, important Conrail paths are tested to uncover errors within the
boundary of the modules. This testing is carried out during the programming stage itself. In this
type of testing step, each module was found to be working satisfactorily as regards to the
expected output from the module.
In Due Course, latest technology advancements will be taken into consideration. As part
of technical build-up many components of the networking system will be generic in nature so
that future projects can either use or interact with this. The future holds a lot to offer to the
development and refinement of this project.