Parts List

For Portable Compressors

XAHS 186 Dd
 Parts List
For Portable Compressors

XAHS 186 Dd

Parts Index ............................................................................................... 4

Warranty and Liability ............................................................................ 7

Safety Precautions for Portable Compressors ...................................... 9

Ordering Spare Parts ............................................................................ 13

Parts Lists............................................................................................... 17

Printed Matter N°

2955 0730 00

05/2006
ATLAS COPCO - PORTABLE AIR DIVISION
www.atlascopco.com
 PARTS INDEX

PARTS INDEX
PART PAGE PART PAGE
A E
A.C. EYE ......................................................................................................... 78 ELBOW PIPE COUPLING ................................................................. 40, 73, 85
ACTUATING UNIT ASSEMBLY .................................................................. 40 ELECTRICAL SYSTEM .......................................................................... 52, 53
ADAPTER ................................................................................................. 42, 89 ELEMENT MOUNTING ................................................................................ 29
AFTERCOOLER.............................................................. 94, 95, 96, 97, 98, 99 ENGINE........................................................................................................... 36
AIR INLET................................................................................................ 48, 49 ENGINE SPEED REGULATOR............................................................... 70, 71
AIR OUTLET.................................................................................................. 46 ENGINE AND ACCESSORIES ............................................................... 36, 37
AIR OUTLET PIPE......................................................................................... 59 ENGINE COOLANT....................................................................................... 23
AIRDUCT........................................................................................................ 48 ENGINE COOLING.................................................................................. 44, 45
AIRFILTER ..................................................................................................... 48 ENGINE OIL ............................................................................................. 18, 19
AIRFILTER ELEMENT.................................................................................. 48 EXXHAUST ELBOW..................................................................................... 36
APPLIANCE INLET................................................................................. 87, 88 EXHAUST PIPE.............................................................................................. 36
AXLE............................................................................................................... 82
F
B FAN .................................................................................................................. 42
BAFFLE .......................................................................................................... 61 FAN COWL ..................................................................................................... 42
BALL BEARING ............................................................................................ 35 FANGUARD.................................................................................................... 42
BALL CAGE ................................................................................................... 77 FILTER HEAD ......................................................................................... 62, 63
BALL COUPLING.................................................................................... 78, 79 FLANGE........................................................................................................ 110
BALL VALVE ........................................................................... 46, 91, 101, 104 FOOT ............................................................................................................... 80
BALL VALVE ASSEMBLY ........................................................................... 46 FRAME...................................................................................................... 32, 65
BASE PLATE .................................................................................................. 50 FRAME AND MOUNTS .......................................................................... 32, 33
BATTERY.................................................................................. 62, 63, 106, 108 FRONT MARKER .................................................................................... 87, 88
BATTERY CABLE ......................................................................................... 52 FRONT PANEL ............................................................................................... 50
BATTERY SUPPORT ........................................................................... 106, 108 FUEL GAUGE................................................................................................. 34
BELT GUARD ................................................................................................ 42 FUEL HOSE .............................................................................................. 34, 44
BODYWORK AND MOUNTS ................................................................ 50, 51 FUEL SYSTEM............................................................................................... 34
BRAKE CABLE............................................................................................. 82 FUEL FILTER ................................................................................................. 34
BRAKE SHOES .............................................................................................. 30 FUEL TANK................................................................................................... 66
BUMPER BAR............................................................................................... 88 FUEL TANK ASSEMBLY ........................................................................ 34, 66
BUSH................................................................................................... 40, 78, 79
BUSHING.................................................................................................. 35, 68 G
GAS SPRING .................................................................................................. 50
C GEAR CASING............................................................................................... 35
CABLE ...................................................................................................... 87, 88 GEAR WHEEL................................................................................................ 55
CABLE CLAMP ........................................................................... 40, 52, 87, 88 GEARCASING AND MOUNTS .................................................................... 35
CABLE STRIP .......................................................................................... 44, 52 GEARSET........................................................................................................ 55
CAP.................................................................................................................. 66 GROMMET ................................................................................... 52, 66, 87, 88
CATCH ............................................................................................................ 50
CHAIN ASSEMBLY....................................................................................... 80 H
CIRCLIP .......................................................................................................... 35
HANDGRIP ..................................................................................................... 50
CIRCUIT BREAKER...................................................................................... 52 HANDLE ......................................................................................................... 77
CLAMP.................................................................... 36, 48, 52, 87, 88, 106, 108
HEXAGON PLUG ................................................ 42, 46, 68, 75, 76, 94, 96, 98
CLAMP ASSEMBLY...................................................................................... 80
HINGE ............................................................................................................. 50
COMPRESSOR SPRING................................................................................ 70 HOLDER ......................................................................................................... 50
COMPRESSOR OIL ........................................................................... 20, 21, 22
HOSE ............................................................................................. 34, 44, 48, 85
CONNECTION ................................................................................... 94, 96, 98
HOSE ASSEMBLY ............................................... 36, 39, 46, 91, 102, 106, 108
CONTAINER .................................................................................................. 21 HOSE CLAMP ........................................................................ 34, 36, 44, 48, 85
COOLER ......................................................................................................... 42
HOURMETER................................................................................................. 73
COOLER AND FAN ................................................................................. 42, 43
HOUSE MARK ............................................................................................... 54
COUPLING ................................................................................... 38, 94, 96, 98 HOUSING.................................................................................................. 74, 77
COUPLING HUB............................................................................................ 38
COUPLING RING .......................................................................................... 38
COVER.................................................................... 32, 50, 74, 75, 76, 106, 108 I
CROSS PIPE COUPLING .............................................................................. 85 INDICATOR .................................................................................................... 48
INFORMATION LABEL ................................................................ 54, 106, 108
INLET SHUT DOWN VALVE................................................................ 85, 110
D INSTRUCTION LABEL ................................................................................. 54
DECAL ...................................................................................................... 57, 64
INSTRUMENT PANEL ASSEMBLY ..................................................... 47, 73
DIN EYE ......................................................................................................... 78 INSULATION.................................................................................................. 36
DISTANCE SLEEVE ...................................................................................... 50
INSULATION HOSE ...................................................................................... 40
DOOR .............................................................................................................. 50
DRIVE ............................................................................................................. 55

4
 PARTS INDEX

PARTS INDEX
PART PAGE PART PAGE
K PUSH BUTTON ...................................................................................... 34, 110
KEY ................................................................................................................. 50
KNOB.............................................................................................................. 74 Q
QD-FILTER ..................................................................................................... 98
L
LABEL .................................................................................................... 73, 105 R
LABEL NOISE................................................................................................ 64 RADIATOR ..................................................................................................... 42
LEVEL GAUGE.................................................................................. 34, 67, 72 RADIATOR CAP............................................................................................. 44
LEVEL SWITCH ............................................................................................ 44 REFLECTOR............................................................................................. 87, 88
LEVER ............................................................................................................ 40 REGULATING SYSTEM ......................................................................... 40, 41
LIFTING EYE................................................................................................. 32 REGULATING VALVE................................................................................... 27
LIGHT ......................................................................................................88, 112 REGULATING VALVE ASSEMBLY................................................ 67, 72, 77
LOAD VALVE ASSEMBLY..................................................................... 73, 74 REHEATER ........................................................................................... 102, 103
LOADING VALVE ......................................................................................... 28 RELAY..................................................................................... 52, 106, 108, 110
LOCK .............................................................................................................. 50 RESTRICTOR ..................................................................................... 94, 96, 98
RETAINER .................................................................................... 32, 35, 67, 72
M RETAINING RING ......................................................................................... 74
MANIFOLD .................................................................................................... 46 RING................................................................................................................ 40
MARKINGS.............................................................................................. 54, 64 ROAD AXLE BEARINGS.............................................................................. 31
METAL FILLERNECK .................................................................................. 81 ROAD LIGHT SYSTEM .......................................................................... 87, 88
MINIMUM PRESSURE VALVE.................................................................... 46 ROOF DUCT ................................................................................................... 50
MODULE ........................................................................................................ 73
MOTOR ACCESSORY......................................................................... 106, 108 S
MUDGUARD.................................................................................................. 82 SAFETY AND CONTROL ............................................................................. 47
SAFETY CARTRIDGE................................................................................... 48
N SAFETY VALVE....................................................................................... 57, 58
NATO EYE...................................................................................................... 79 SERIAL CONNECT SET......................................................................... 96, 98
NYLON BAND ............................................................................................... 32 SERVICE KIT........................................................ 24, 25, 26, 27, 28, 29, 30, 31
SERVICE PAK................................................................................................. 17
SERVICE STAGE............................................................................................ 35
O
SET OILFILTER.............................................................................................. 56
OIL CAN ............................................................................................ 20, 21, 22
SILENCER .................................................................................... 36, 94, 96, 98
OIL FILTER .................................................................................................... 56
SILENCING SET ............................................................................................ 61
OIL NOZZLE ................................................................................................. 35
SKID .......................................................................................................... 92, 93
OIL SEPARATOR ........................................................... 26, 57, 62, 67, 72, 106
SOLENOID VALVE...................................................................................... 110
OIL SEPARATOR AND PIPES ...................................................... 62, 106, 107
SPARK ARRESTOR ....................................................................................... 84
OIL SYSTEM.................................................................................................. 39
SPEED REGULATOR..................................................................................... 24
SPEED SWITCH ........................................................................................... 110
P SPHERICAL PLAIN BEARING .................................................................... 70
PANEL................................................................................................50, 73, 112 SPRING ......................................................................................... 68, 70, 74, 77
PANEL ASSEMBLY................................................................................87, 112 SPRING CLIP.................................................................................................. 50
PARALLEL KEY ...................................................................................... 35, 38 SPRING COVER............................................................................................. 77
PARALLEL PIN.............................................................................................. 35 SPRING GUIDE.............................................................................................. 77
PARCOOL ....................................................................................................... 23 SPRING SEAT................................................................................................. 77
PAROIL .................................................................................. 18, 19, 20, 21, 22 STIRRUP ......................................................................................................... 50
PD-FILTER................................................................................................ 96, 98 STEEL DRUM .................................................................................... 20, 21, 22
PIPE ................................................................. 44, 46, 48, 57, 58, 59, 60, 62, 63 STRAIGHT PIPE COUPLING ......................................... 36, 40, 39, 68, 73, 85
................................................................ 85 , 86, 94, 96, 91, 102, 100, 101, 104 STRAINER ...................................................................................................... 66
PIPE AFTERCOOLER ....................................................................... 94, 96, 98 STRAP ............................................................................................................. 34
PIPE CLAMP .................................................................................................. 84 SUPPORT .................................................. 32, 42, 48, 52, 78, 90, 106, 108, 110
PIPE COUPLING...................................................................................... 40, 57 SWITCH OVERSPEED ASSEMBLY............................................................ 85
PIPES AND FITINGS..................................................................... 63, 108, 109 SWIVEL WHEEL ........................................................................................... 80
PIPES AND VALVE....................................................................................... 91
PISTON ..................................................................................................... 68, 70
T
PISTON ROD............................................................................................ 68, 70
TEE .................................................................................................................. 40
PLASTIC TUBE.................................................... 36, 40, 66, 68, 85, 94, 96, 98
TEE PIPE COUPLING.................................................................................... 40
PLATE ..................................................................................... 32, 36, 50, 61, 73
TEMPERATURE SWITCH............................................................................. 47
PLUG................................................................................................... 32, 47, 66
THERMOSTATIC VALVE.................................................................... 106, 108
PRESSURE GAUGE ................................................................................ 40, 73
TOOL BOX...................................................................................................... 32
PRESSURE VESSEL.................................................................... 67, 72, 75, 76
TOPTANK........................................................................................................ 44
PROTECTION COVER.................................................................................. 65
TOWBAR ........................................................................................................ 82
PROTECTION .................................................................................... 36, 87, 88
TOWBAR ACCESSORIES............................................................................. 80
PROTECTION CAP........................................................................................ 52
TOWBAR AND AXLE ............................................................................. 82, 83

5
 PARTS INDEX

PARTS INDEX
PART PAGE PART PAGE
T
TOWING EYE .......................................................................................... 78, 79
TUBE................................................................................................... 32, 67, 72
TYRE............................................................................................................... 82
TYRE ASSEMBLY ......................................................................................... 82

U
UNLOADING VALVE.................................................................. 25, 40, 68, 69

V
VENTIL........................................................................................................... 82
VALVE....................................................................................................... 68, 74
VALVE HOUSING.......................................................................... 46, 106, 108
VALVE ROD ................................................................................................... 74
VESSEL..................................................................................................... 75, 76
VESSEL AIR OUTLET PIPE ......................................................................... 60
VIBRATING DAMPER.................................................................................. 32

W
WARNING LABEL....................................................................... 54, 57, 64, 82
WARRANTY LABEL..................................................................................... 54
WHEEL CHOCKS ........................................................................................ 105
WINDOW.................................................................................................. 73, 85
WIRE HARNESS.......................................................... 52, 85, 87, 88, 106, 108
WSD-FILTER ...................................................................................... 94, 96, 98

6
 INSTRUCTION MANUAL

Warranty and Liability Limitation Limitazione di Garanzia e di Responsabilità

Usare solo componenti autorizzati.
Use only authorized parts.
Qualsiasi danno o malfunzione causati dall'uso di componenti non autorizzati non è
Any damage or malfunction caused by the use of unauthorized parts is not covered
coperto dalla Garanzia o dalla Responsabilità sul Prodotto.
by Warranty or Product Liability.
Il fabbricante non accetta alcuna reponsabilità per danni derivanti da modifiche,
The manufacturer does not accept any liability for any damage arising for modifica-
aggiunte o trasformazioni effettuate senza l'approvazione scritta del fabbricante.
tions, additions or conversions made without the manufacturer's approval in writing.
Copyright 2004, Atlas Copco Airpower n.v., Anversa, Belgio.
Copyright 2004, Atlas Copco Airpower n.v., Antwerp, Belgium.
Sono vietati ogni uso o copia non autorizzati del contenuto o di qualsiasi parte dello
Any unauthorized use or copying of the contents or any part thereof is prohibited.
stesso.
This applies in particular to trademarks, model denominations, part numbers and
Ciò si applica in particolare ai marchi, alle denominazioni dei modelli, ai numeri dei
drawings.
componenti ed ai disegni.

Garantie- en aansprakelijkheidsbepalingen Garanti- og ansvarsbegrænsning

Gebruik alleen originele onderdelen. Brug kun tilladte reservedele.
Beschadigingen of defecten die het gevolg zijn van het gebruik van niet originele Enhver skade eller fejlfunktion, forårsaget af brug af ikke tilladte reservedele,
onderdelen vallen niet onder garantie of productaansprakelijkheid. omfattes ikke af garantien eller produktansvaret.
De producent is niet aansprakelijk voor enige schade veroorzaakt door modificatie, Fabrikanten kan ikke drages til ansvar for nogen skade som følge af ændringer,
toevoeging of ombouw, gemaakt zonder de schriftelijke toestemming van de fabri- udvidelser eller ombygninger, der er blevet udført uden fabrikantens skriftlige sam-
kant. tykke.

Copyright 2004, Atlas Copco Airpower n.v., Antwerpen, België. Copyright 2004, Atlas Copco Airpower n.v., Antwerpen, Belgien.
Het is niet toegestaan om zonder toestemming de inhoud geheel of gedeeltelijk te Enhver uautoriseret brug eller kopiering af indholdet eller dele deraf er forbudt.
kopiëren of anderszins te gebruiken. Dette gælder især varemærker, modelbenævnelser, delnumre og tegninger.
Dit betreft vooral trademarks, modelbenamingen, onderdeelnummers en tekeningen.

Εγγύηση και Περιορισµός Ευθύνης

Limitation de garantie et de responsabilité Χρησιµοποιήστε µόνο εγκεκριµένα εξαρτήµατα.
Utiliser uniquement les pièces homologuées. Οποιαδήποτε ζηµιά ή δυσλειτουργία προκληθεί από τη χρήση µη
Tout dommage ou mauvais fonctionnement dû à l’utilisation de pièces non homo- εγκεκριµένων εξαρτηµάτων δεν καλύπτεται από την εγγύηση και την ευθύνη
loguées n’est pas couvert par la garantie ou la responsabilité des produits défectueux. για το προϊόν.
Le fabriquant décline toute responsabilité en cas de dommage faisant suite à des Ο κατασκευαστής δεν αποδέχεται καµία ευθύνη για ζηµιές που προκύπτουν
modifications, des ajouts ou des conversions effectués sans l’accord écrit du fabri- από τροποποιήσεις, προσθήκες ή µετατροπές που έγιναν χωρίς τη γραπτή
quant. έγκριση του κατασκευαστή.

Copyright 2004, Atlas Copco Airpower n.v., Antwerp, Belgique. Copyright 2004, Atlas Copco Airpower n.v., Αµβέρσα, Βέλγιο.
Toute utilisation ou copie du contenu, ou d’une parte de celui-ci, non autorisée est Απαγορεύεται οποιαδήποτε χρήση ή αντιγραφή του περιεχόµενου ή
interdite. οποιουδήποτε τµήµατος του παρόντος χωρίς εξουσιοδότηση.
Cette interdiction s’applique en particulier aux marques de commerce, aux dénomi- Αυτό ισχύει συγκεκριµένα για εµπορικά σήµατα, ονοµασίες µοντέλων,
nations des modèles, aux numéros des pièces et aux schémas. κωδικούς εξαρτηµάτων και σχέδια.

Garantie- und Haftungseinschränkungen

Nur zugelassene Teile verwenden. Garanti og ansvarsbegrensning
Jede Beschädigung oder Fehlfunktion, die durch die Verwendung von nicht zugelass- Bruk kun autoriserte deler.
enen Teilen verursacht wurde, ist nicht durch die Garantie oder Produkthaftung abge- Enhver skade eller funksjonsfeil som skyldes bruk av uautoriserte deler dekkes ikke
deckt. av garanti eller produktansvar.
Der Hersteller übernimmt keine Haftung für Schäden, die durch Modifizierungen, Fabrikanten aksepterer intet ansvar for noen skade som oppstår på grunn av modifi-
Ergänzungen oder Funktionsänderungen entstehen, die ohne schriftliche Zustim- kasjoner, tilføyelser eller forandringer som er gjort uten fabrikantens skriftlige tilla-
mung des Herstellers erfolgt sind. telse.

Urheberrecht 2004, Atlas Copco Airpower n.v., Antwerpen, Belgien. Copyright 2004, Atlas Copco Airpower n.v., Antwerpen, Belgia.
Jede nicht genehmigte Verwendung oder Kopie des Inhaltes oder von Teilen ist unter- All uautorisert bruk eller kopiering av innholdet eller en del av det er forbudt.
sagt. Dette gjelder særlig varemerker, modellbenevnelser, delenumre og tegninger.
Das bezieht sich im Einzelnen auf Warenzeichen, Modellbezeichnungen, Teilenum-
mern und Zeichnungen.

Limitación de garantía y responsabilidad Takuun ja vastuuvelvollisuuden rajoitus

Use sólo piezas autorizadas.
La garantía o responsabilidad del producto no cubre ningún daño o funcionamiento Käytä vain valmistajan hyväksymiä varaosia.
defectuoso provocado por el uso de piezas no autorizadas. Takuu ja tuotevastuu eivät kata vahinkoja tai toimintahäiriöitä, joiden syynä on mui-
El fabricante no acepta ninguna responsabilidad por los daños provocados por modi- den kuin hyväksyttyjen varaosien käyttö.
ficaciones, adiciones o conversiones realizadas sin la aprobación por escrito del fab- Valmistaja ei vastaa vahingoista, jotka aiheutuvat ilman valmistajan kirjallista lupaa
ricante.
tehdyistä muutoksista tai lisäyksistä.
Derechos de reproducción 2004, Atlas Copco Airpower n.v., Amberes, Bélgica.
Está prohibida toda utilización o reproducción total o parcial no autorizada de estos Copyright 2004, Atlas Copco Airpower n.v., Antwerpen, Belgia.
contenidos, Sisällön osittainenkin käyttö tai kopiointi ilman lupaa on kielletty.
en especial de las marcas registradas, denominaciones de modelos, números de pie-
zas y planos. Tämä koskee erityisesti tavaramerkkejä, mallien nimiä, osanumeroita ja piirustuksia.

Begränsningar av garanti och ansvarsskyldighet Garantijas un atbildîbas ierobeþojumi

Använd endast godkända delar.
Izmantot tikai ieteiktâs rezerves daïas.
Den skada eller funktionsoduglighet som förorsakats av att ej godkända delar har
Ðî garantija nesedz bojâjumus vai disfunkciju, kuri ir raduðies neatïautu rezerves daïu
använts, täcks inte av garantin eller produktansvaret.
izmantoðanas rezultâtâ.
Tillverkaren accepterar ingen ansvarsskyldighet för skador som uppstått efter att
Raþotâjs nepieòem pretenzijas par bojâjumiem, kas izriet no modifikâcijâm,
ändringar, tillägg eller ombyggnader gjorts utan skriftligt tillstånd från tillverkaren.
papildinâjumiem vai pârveidojumiem bez raþotâja rakstiskas piekriðanas.
Copyright 2004, Atlas Copco Airpower n.v., Antwerpen, Belgien.
Ej auktoriserad användning eller kopiering av innehållet, eller delar av det, är förbju-
Autortiesîbas 2004, Atlas Copco Airpower n.v., Antverpene, Beïìija.
den.
Detta gäller speciellt varumärken, modellbeteckningar, reservdelsnummer och ritnin- Jebkura neatïautâ ðî satura izmantoðana vai kopçðana ir aizliegta.Tas konkrçti attiecas
gar. uz tirdzniecîbas markâm, modeïu denominâcijâm, daïu numuriem un rasçjumiem.

7
XAHS 186 Dd

Limites de Garantia e Responsabilidade

Ограничение гарантии и ответственности
Utilize apenas peças autorizadas.
Avarias ou defeitos de funcionamento que sejam causados pelo uso de sobresselentes Используйте компоненты только авторизованных поставщиков.
Не распространяется гарантия и ответственность за продукцию при
ou componentes não autorizados não serão cobertos pela Garantia ou pela Responsa-
любых повреждениях или неисправностях в результате использования
bilidade de Produto. неавторизованных компонентов.
O fabricante não aceita qualquer responsabilidade por quaisquer danos resultantes de Производитель не несет никакой ответственности за любые
modificações, adições ou conversões efectuadas sem a aprovação escrita do fabri- повреждения, возникшие в результате модификации, дополнения или
изменения, выполненные без письменного утверждения производителя.
cante.

Copyright 2004, Atlas Copco Airpower n.v., Antuérpia, Bélgica. Copyright 2004, Atlas Copco Airpower n.v., Антверпен, Бельгия.
Qualquer uso não autorizado ou cópia do conteúdo ou de qualquer parte dele é proib- Запрещается любое несанкционированное использование или
ida. копирование содержания этих материалов или их части.
Isto aplica-se em particular a marcas registadas, denominações de modelos, números В особенности это относится к торговым маркам, обозначениям
моделей, номерам деталей и чертежам.
de peças e desenhos.

有限担保和责任 Gwarancja i ograniczenie odpowiedzialności

只允许使用经认可的零件。 Stosować jedynie oryginalne części zamienne.
Jakiekolwiek uszkodzenia lub niesprawności spowodowane stosowaniem
因使用未经认可的零件而导致的任何损坏或故障不在本担保或产品责任所保 niezaaprobowanych części zamiennych nie są objęte gwarancją lub
障的范围之内。 odpowiedzialnością za produkt.
未经制造商书面许可，制造商概不负责因擅自对设备进行改动、添加附件或 Producent nie będzie ponosił żadnej odpowiedzialności za jakiekolwiek
改型而导致的设备损坏。 szkody spowodowane modyfikacjami, dodatkami lub zmianami wykonanymi
bez pisemnej zgody producenta.

版权 2004，比利时安特卫普 Atlas Copco Airpower n.v.。

Copyright 2004, Atlas Copco Airpower n.v., Antwerpia, Belgia.
未经许可，禁止使用或复制本手册中所含的全部或任何一部分内容。
Wszelkie stosowanie lub kopiowanie zawartości lub jakiejkolwiek części
本公告特别适用于本手册所含的商标、型号名称、零件代号和图纸。 publikacji bez zezwolenia jest zabronione.
Dotyczy to szczególnie znaków handlowych, oznaczeń modeli, numerów
części oraz rysunków.

A garancia és felelősség korlátozása Omezení záruky a odpovědnosti

Csak jóváhagyott alkatrészeket használjon! Používejte pouze takové součásti, které jsou schválené výrobcem zařízení.
A nem jóváhagyott alkatrészek használatából adódó sérülésekre és Jakékoliv poškození nebo závady způsobené použitím součástí, které nebyly
üzemzavarra nem terjed ki a garancia és a termékfelelősség. schválené výrobcem zařízení, nejsou kryty zárukou, nebo odpovědností za
A gyártó semminemű felelősséget nem vállal a gyártó írásos jóváhagyása výrobek.
nélkül végzett bármilyen módosításokból, kiegészítésekből vagy Výrobce nepřijímá žádnou odpovědnost za jakékoliv škody, způsobené
átalakításokból adódó sérülésekért. modifikacemi, doplňky nebo přestavbami zařízení provedenými bez
předchozího písemného svolení.

Copyright 2004, Atlas Copco Airpower n.v., Antwerp, Belgium.

Copyright 2004, Atlas Copco Airpower n.v., Antverpy, Belgie.
A kézikönyv tartalma vagy annak egy részének engedély nélküli fel-
használása vagy másolása tilos. Jakékoliv neoprávněné použití nebo kopírování obsahu tohoto dokumentu
nebo kterékoliv jeho části je zakázáno.
Ez vonatkozik különösen a védjegyekre, a típusjelölésekre, cikkszámokra és
Toto platí obzvláště pro obchodní známky, označení modelů, čísla součástí a
rajzokra. výkresovou dokumentací.

Záruka a obmedzenia zodpovednosti výrobcu Garancijski pogoji in omejitve

Používajte len schválené súčiastky. Uporabljajte samo odobrene dele.
Akákoľvek škoda alebo porucha spôsobená použitím neschválených Garancija proizvajalca ni veljavna pri poškodbah ali motnjah v delovanju, ki so
súčiastok nie je zahrnutá v záruke ani zodpovednosti výrobcu za škodu. posledica uporabe neodobrenih delov.
Výrobca nepripúšt’a žiadnu zodpovednost’ za akékoľvek škody vzniknuté Proizvajalec ne prevzema nikakršne odgovornosti za poškodbe, ki so nastale
úpravou, pridaním alebo prerobením, ktoré boli vykonané bez zaradi sprememb, dodatkov ali prilagoditev na izdelku, ki so bile izvedene
predchádzajúceho písomného súhlasu výrobcu. brez pisne odobritve proizvajalca.

Autorské práva 2004, Atlas Copco Airpower n.v., Antverpy, Belgicko. Copyright 2004, Atlas Copco Airpower n.v., Antwerp, Belgium.
Akékoľvek neoprávnené použitie alebo kopírovanie obsahu, alebo jeho časti Brez pisnega dovoljenja ni dovoljeno uporabljati ali razmnoževati nobenega
je zakázané. dela dokumenta.
Toto sa vzt’ahuje najmä na obchodné značky, modelové označenia, čísla To velja še posebno za blagovne znamke, označbe modelov, številke izdelkov
súčiastok a nákresy. in risbe.

Garantii ja piiratud vastutus Garantijos ir atsakomybës galiojimas

Kasutage ainult valmistaja poolt aktsepteeritud varuosi. Naudokite tik originalias dalis.
Mis tahes vigastus või rike, mille on põhjustanud valmistaja poolt aktsepteerimata Garantija nebus taikoma tuo atveju, jeigu þala ar sutrikimas atsiranda naudojant
varuosa kasutamine, ei kuulu toote garantii või tootja vastutuse alla. neoriginalias dalis.
Valmistaja ei aktsepteeri ühtegi riket, mis on tekkinud toote modifitseerimisest, Gamintojas neprisiima jokios atsakomybës dël þalos, susijusios su modifikacija,
lisandustest või ümberehitamisest, mida valmistaja ei ole kirjalikult heaks kiitnud. papildymu ar perdirbimu, atliktu be raðtiðko gamintojo sutikimo.

Copyright 2004, Atlas Copco Airpower n.v., Antwerp, Belgium. Autorystës teisë 2004, “Atlas Copco Airpower n.v.“, Antverpenas, Belgija.
Käesoleva juhendi mistahes loata kasutamine või kopeerimine on keelatud. Neteisëtas viso teksto ar kurios nors jo dalies panaudojimas ar kopijavimas yra
See kehtib nii kaubamärkide, mudeli nimetuste, varuosade numbrite kui ka jooniste draudþiamas.
kohta. Visø pirma ði sàlyga taikoma prekiniams þenklams, modeliø pavadinimams, daliø
numeriams ir brëþiniams.

8
1. SAFETY PRECAUTIONS FOR PORTABLE COMPRESSORS
To be read attentively and acted accordingly before towing, lifting, operating, performing maintenance or repairing the compressor

1.1 INTRODUCTION
The policy of Atlas Copco is to provide the users of their equipment with The manufacturer does not accept any liability for any damage arising from
safe, reliable and efficient products. Factors taken into account are among the use of non-original parts and for modifications, additions or conversions
others: made without the manufacturer’s approval in writing.
- the intended and predictable future use of the products, and the
If any statement in this manual does not comply with local legislation, the
environments in which they are expected to operate,
stricter of the two shall be applied.
- applicable rules, codes and regulations,
- the expected useful product life, assuming proper service and Statements in these safety precautions should not be interpreted as
maintenance, suggestions, recommendations or inducements that it should be used in
- providing the manual with up-to-date information. violation of any applicable laws or regulations.
Before handling any product, take time to read the relevant instruction
manual. Besides giving detailed operating instructions, it also gives specific
information about safety, preventive maintenance, etc.
Keep the manual always at the unit location, easy accessible to the operating 1.2 GENERAL SAFETY PRECAUTIONS
personnel.
See also the safety precautions of the engine and possible other equipment, 1 The owner is responsible for maintaining the unit in a safe operating
which are separately sent along or are mentioned on the equipment or parts condition. Unit parts and accessories must be replaced if missing or
of the unit. unsuitable for safe operation.
These safety precautions are general and some statements will therefore not 2 The supervisor, or the responsible person, shall at all times make sure
always apply to a particular unit. that all instructions regarding machinery and equipment operation and
Only people that have the right skills should be allowed to operate, adjust, maintenance are strictly followed and that the machines with all
perform maintenance or repair on Atlas Copco equipment. It is the accessories and safety devices, as well as the consuming devices, are in
responsibility of management to appoint operators with the appropriate good repair, free of abnormal wear or abuse, and are not tampered with.
training and skill for each category of job. 3 Whenever there is an indication or any suspicion that an internal part of
Skill level 1: Operator a machine is overheated, the machine shall be stopped but no inspection
covers shall be opened before sufficient cooling time has elapsed; this to
An operator is trained in all aspects of operating the unit with the push- avoid the risk of spontaneous ignition of oil vapour when air is admitted.
buttons, and is trained to know the safety aspects.
4 Normal ratings (pressures, temperatures, speeds, etc.) shall be durably
Skill level 2: Mechanical technician marked.
A mechanical technician is trained to operate the unit the same as the
operator. In addition, the mechanical technician is also trained to perform 5 Operate the unit only for the intended purpose and within its rated limits
maintenance and repair, as described in the instruction manual, and is (pressure, temperature, speeds, etc.).
allowed to change settings of the control and safety system. A mechanical 6 The machinery and equipment shall be kept clean, i.e. as free as possible
technician does not work on live electrical components. from oil, dust or other deposits.
Skill level 3: Electrical technician 7 To prevent an increase in working temperature, inspect and clean heat
An electrical technician is trained and has the same qualifications as both the transfer surfaces (cooler fins, intercoolers, water jackets, etc.) regularly.
operator and the mechanical technician. In addition, the electrical technician See the maintenance schedule.
may carry out electrical repairs within the various enclosures of the unit. 8 All regulating and safety devices shall be maintained with due care to
This includes work on live electrical components. ensure that they function properly. They may not be put out of action.
Skill level 4: Specialist from the manufacturer 9 Care shall be taken to avoid damage to safety valves and other pressure-
This is a skilled specialist sent by the manufacturer or its agent to perform relief devices, especially to avoid plugging by paint, oil coke or dirt
complex repairs or modifications to the equipment. accumulation, which could interfere with the functioning of the device.
In general it is recommended that not more than two people operate the unit, 10 Pressure and temperature gauges shall be checked regularly with regard
more operators could lead to unsafe operating conditions. Take necessary to their accuracy. They shall be replaced whenever outside acceptable
steps to keep unauthorized persons away from the unit and eliminate all tolerances.
possible sources of danger at the unit.
11 Safety devices shall be tested as described in the maintenance schedule
When handling, operating, overhauling and/or performing maintenance or of the instruction manual to determine that they are in good operating
repair on Atlas Copco equipment, the mechanics are expected to use safe condition.
engineering practices and to observe all relevant local safety requirements
12 Mind the markings and information labels on the unit.
and ordinances. The following list is a reminder of special safety directives
and precautions mainly applicable to Atlas Copco equipment. 13 In the event the safety labels are damaged or destroyed, they must be
replaced to ensure operator safety.
These safety precautions apply to machinery processing or consuming air.
Processing of any other gas requires additional safety precautions typical to 14 Keep the work area neet. Lack of order will increase the risk of
the application and are not included herein. accidents.
Neglecting the safety precautions may endanger people as well as 15 When working on the unit, wear safety clothing. Depending on the kind
environment and machinery: of activities these are: safety glasses, ear protection, safety helmet
- endanger people due to electrical, mechanical or chemical influences, (including visor), safety gloves, protective clothing, safety shoes. Do not
- endanger the environment due to leakage of oil, solvents or other wear the hair long and loose (protect long hair with a hairnet), or wear
substances, loose clothing or jewelry.
- endanger the machinery due to function failures. 16 Take precautions against fire. Handle fuel, oil and anti-freeze with care
All responsibility for any damage or injury resulting from neglecting these because they are inflammable substances. Do not smoke or approach
precautions or by non-observance of ordinary caution and due care required with naked flame when handling such substances. Keep a fire-
in handling, operating, maintenance or repair, also if not expressly extinguisher in the vicinity.
mentioned in this instruction manual, is disclaimed by Atlas Copco.

9
1.3 SAFETY DURING TRANSPORT AND 1.4 SAFETY DURING USE AND OPERATION
INSTALLATION
1 When the unit has to operate in a fire-hazardous environment, each
engine exhaust has to be provided with a spark arrestor to trap
To lift a unit, all loose or pivoting parts, e.g. doors and towbar, shall first be
incendiary sparks.
securely fastened.
2 The exhaust contains carbon monoxide which is a lethal gas. When the
Do not attach cables, chains or ropes directly to the lifting eye; apply a crane
unit is used in a confined space, conduct the engine exhaust to the
hook or lifting shackle meeting local safety regulations. Never allow sharp
outside atmosphere by a pipe of sufficient diameter; do this in such a
bends in lifting cables, chains or ropes.
way that no extra back pressure is created for the engine. If necessary,
Helicopter lifting is not allowed. install an extractor. Observe any existing local regulations. Make sure
It is strictly forbidden to dwell or stay in the risk zone under a lifted load. that the unit has sufficient air intake for operation. If necessary, install
Never lift the unit over people or residential areas. Lifting acceleration and extra air intake ducts.
retardation shall be kept within safe limits.
3 When operating in a dust-laden atmosphere, place the unit so that dust is
1 Before towing the unit: not carried towards it by the wind. Operation in clean surroundings
- ascertain that the pressure vessel(s) is (are) depressurized, considerably extends the intervals for cleaning the air intake filters and
- check the towbar, the brake system and the towing eye. Also check the cores of the coolers.
the coupling of the towing vehicle,
4 Close the compressor air outlet valve before connecting or
- check the towing and brake capability of the towing vehicle,
disconnecting a hose. Ascertain that a hose is fully depressurized before
- check that the towbar, jockey wheel or stand leg is safely locked in
disconnecting it. Before blowing compressed air through a hose or air
the raised position,
line, ensure that the open end is held securely, so that it cannot whip and
- ascertain that the towing eye can swivel freely on the hook,
cause injury.
- check that the wheels are secure and that the tyres are in good
condition and inflated correctly, 5 The air line end connected to the outlet valve must be safeguarded with
- connect the signalisation cable, check all lights and connect the a safety cable, attached next to the valve.
pneumatic brake couplers, 6 No external force may be exerted on the air outlet valves, e.g. by pulling
- attach the safety break-away cable or safety chain to the towing on hoses or by installing auxiliary equipment directly to a valve, e.g. a
vehicle, water separator, a lubricator, etc. Do not step on the air outlet valves.
- remove wheel chocks, if applied, and disengage the parking brake.
7 Never move a unit when external lines or hoses are connected to the
2 To tow a unit use a towing vehicle of ample capacity. Refer to the outlet valves, to avoid damage to valves, manifold and hoses.
documentation of the towing vehicle.
8 Do not use compressed air from any type of compressor, without taking
3 If the unit is to be backed up by the towing vehicle, disengage the extra measures, for breathing purposes as this may result in injury or
overrun brake mechanism (if it is not an automatic mechanism). death. For breathing air quality, the compressed air must be adequately
4 Never exceed the maximum towing speed of the unit (mind the local purified according to local legislation and standards. Breathing air must
regulations). always be supplied at stable, suitable pressure.
5 Place the unit on level ground and apply the parking brake before 9 Distribution pipework and air hoses must be of correct diameter and
disconnecting the unit from the towing vehicle. Unclip the safety break- suitable for the working pressure. Never use frayed, damaged or
away cable or safety chain. If the unit has no parking brake or jockey deteriorated hoses. Replace hoses and flexibles before the lifetime
wheel, immobilize the unit by placing chocks in front of and/or behind expires. Use only the correct type and size of hose end fittings and
the wheels. When the towbar can be positioned vertically, the locking connections.
device must be applied and kept in good order. 10 If the compressor is to be used for sand-blasting or will be connected to
6 To lift heavy parts, a hoist of ample capacity, tested and approved a common compressed-air system, fit an appropriate non-return valve
according to local safety regulations, shall be used. (check valve) between compressor outlet and the connected sand-
blasting or compressed-air system. Observe the right mounting position/
7 Lifting hooks, eyes, shackles, etc., shall never be bent and shall only
direction.
have stress in line with their design load axis. The capacity of a lifting
device diminishes when the lifting force is applied at an angle to its load 11 Before removing the oil filler plug, ensure that the pressure is released
axis. by opening an air outlet valve.
8 For maximum safety and efficiency of the lifting apparatus all lifting 12 Never remove a filler cap of the cooling water system of a hot engine.
members shall be applied as near to perpendicular as possible. If Wait until the engine has sufficiently cooled down.
required, a lifting beam shall be applied between hoist and load. 13 Never refill fuel while the unit is running, unless otherwise stated in the
9 Never leave a load hanging on a hoist. Atlas Copco Instruction Book (AIB). Keep fuel away from hot parts
such as air outlet pipes or the engine exhaust. Do not smoke when
10 A hoist has to be installed in such a way that the object will be lifted
fuelling. When fuelling from an automatic pump, an earthing cable
perpendicular. If that is not possible, the necessary precautions must be
should be connected to the unit to discharge static electricity. Never spill
taken to prevent load-swinging, e.g. by using two hoists, each at
nor leave oil, fuel, coolant or cleansing agent in or around the unit.
approximately the same angle not exceeding 30° from the vertical.
11 Locate the unit away from walls. Take all precautions to ensure that hot
air exhausted from the engine and driven machine cooling systems
cannot be recirculated. If such hot air is taken in by the engine or driven
machine cooling fan, this may cause overheating of the unit; if taken in
for combustion, the engine power will be reduced.

10
14 All doors shall be shut during operation so as not to disturb the cooling 1.5 SAFETY DURING MAINTENANCE AND REPAIR
air flow inside the bodywork and/or render the silencing less effective.
A door should be kept open for a short period only e.g. for inspection or
adjustment. Maintenance, overhaul and repair work shall only be carried out by
adequately trained personnel; if required, under supervision of someone
15 Periodically carry out maintenance works according to the maintenance qualified for the job.
schedule.
1 Use only the correct tools for maintenance and repair work, and only
16 Stationary housing guards are provided on all rotating or reciprocating tools which are in good condition.
parts not otherwise protected and which may be hazardous to personnel.
Machinery shall never be put into operation, when such guards have 2 Parts shall only be replaced by genuine Atlas Copco replacement parts.
been removed, before the guards are securely reinstalled. 3 All maintenance work, other than routine attention, shall only be
17 Noise, even at reasonable levels, can cause irritation and disturbance undertaken when the unit is stopped. Steps shall be taken to prevent
which, over a long period of time, may cause severe injuries to the inadvertent starting. In addition, a warning sign bearing a legend such as
nervous system of human beings. ”work in progress; do not start” shall be attached to the starting
When the sound pressure level, at any point where personnel normally equipment.
has to attend, is: On engine-driven units the battery shall be disconnected and removed or
below 70 dB(A): no action needs to be taken, the terminals covered by insulating caps.
above 70 dB(A): noise-protective devices should be provided for On electrically driven units the main switch shall be locked in open
people continuously being present in the room, position and the fuses shall be taken out. A warning sign bearing a
below 85 dB(A): no action needs to be taken for occasional visitors legend such as ”work in progress; do not supply voltage” shall be
staying a limited time only, attached to the fuse box or main switch.
above 85 dB(A): room to be classified as a noise-hazardous area and 4 Before dismantling any pressurized component, the compressor or
an obvious warning shall be placed permanently at equipment shall be effectively isolated from all sources of pressure and
each entrance to alert people entering the room, for the entire system shall be relieved of pressure. Do not rely on non-return
even relatively short times, about the need to wear valves (check valves) to isolate pressure systems. In addition, a warning
ear protectors, sign bearing a legend such as ”work in progress; do not open” shall be
above 95 dB(A): the warning(s) at the entrance(s) shall be completed attached to each of the outlet valves.
with the recommendation that also occasional
visitors shall wear ear protectors, 5 Prior to stripping an engine or other machine or undertaking major
above 105 dB(A): special ear protectors that are adequate for this noise overhaul on it, prevent all movable parts from rolling over or moving.
level and the spectral composition of the noise shall 6 Make sure that no tools, loose parts or rags are left in or on the machine.
be provided and a special warning to that effect shall Never leave rags or loose clothing near the engine air intake.
be placed at each entrance.
7 Never use flammable solvents for cleaning (fire-risk).
18 Insulation or safety guards of parts the temperature of which can be in
8 Take safety precautions against toxic vapours of cleaning liquids.
excess of 80 °C (175 °F) and which may be accidentally touched by
personnel shall not be removed before the parts have cooled to room 9 Never use machine parts as a climbing aid.
temperature. 10 Observe scrupulous cleanliness during maintenance and repair. Keep
19 Never operate the unit in surroundings where there is a possibility of away dirt, cover the parts and exposed openings with a clean cloth,
taking in flammable or toxic fumes. paper or tape.
20 If the working process produces fumes, dust or vibration hazards, etc., 11 Never weld on or perform any operation involving heat near the fuel or
take the necessary steps to eliminate the risk of personnel injury. oil systems. Fuel and oil tanks must be completely purged, e.g. by
steam-cleaning, before carrying out such operations. Never weld on, or
21 When using compressed air or inert gas to clean down equipment, do so
in any way modify, pressure vessels. Disconnect the alternator cables
with caution and use the appropriate protection, at least safety glasses,
during arc welding on the unit.
for the operator as well as for any bystander. Do not apply compressed
air or inert gas to your skin or direct an air or gas stream at people. 12 Support the towbar and the axle(s) securely if working underneath the
Never use it to clean dirt from your clothes. unit or when removing a wheel. Do not rely on jacks.
22 When washing parts in or with a cleaning solvent, provide the required 13 Do not remove any of, or tamper with, the sound-damping material.
ventilation and use appropriate protection such as a breathing filter, Keep the material free of dirt and liquids such as fuel, oil and cleansing
safety glasses, rubber apron and gloves, etc. agents. If any sound-damping material is damaged, replace it to prevent
the sound pressure level from increasing.
23 Safety shoes should be compulsory in any workshop and if there is a
risk, however small, of falling objects, wearing of a safety helmet should 14 Use only lubricating oils and greases recommended or approved by
be included. Atlas Copco or the machine manufacturer. Ascertain that the selected
lubricants comply with all applicable safety regulations, especially with
24 If there is a risk of inhaling hazardous gases, fumes or dust, the
regard to explosion or fire-risk and the possibility of decomposition or
respiratory organs must be protected and depending on the nature of the
generation of hazardous gases. Never mix synthetic with mineral oil.
hazard, so must the eyes and skin.
15 Protect the engine, alternator, air intake filter, electrical and regulating
25 Remember that where there is visible dust, the finer, invisible particles
components, etc., to prevent moisture ingress, e.g. when steam-cleaning.
will almost certainly be present too; but the fact that no dust can be seen
is not a reliable indication that dangerous, invisible dust is not present in 16 When performing any operation involving heat, flames or sparks on a
the air. machine, the surrounding components shall first be screened with non-
flammable material.
26 Never operate the unit at pressures or speeds below or in excess of its
limits as indicated in the technical specifications. 17 Never use a light source with open flame for inspecting the interior of a
machine.

11
18 When repair has been completed, the machine shall be barred over at 1.7 SPECIFIC SAFETY PRECAUTIONS
least one revolution for reciprocating machines, several revolutions for
rotary ones to ensure that there is no mechanical interference within the
machine or driver. Check the direction of rotation of electric motors Batteries
when starting up the machine initially and after any alteration to the When servicing batteries, always wear protecting clothing and glasses.
electrical connection(s) or switch gear, to check that the oil pump and
the fan function properly. 1 The electrolyte in batteries is a sulphuric acid solution which is fatal if it
hits your eyes, and which can cause burns if it contacts your skin.
19 Maintenance and repair work should be recorded in an operator’s Therefore, be careful when handling batteries, e.g. when checking the
logbook for all machinery. Frequency and nature of repairs can reveal charge condition.
unsafe conditions.
2 Install a sign prohibiting fire, open flame and smoking at the post where
20 When hot parts have to be handled, e.g. shrink fitting, special heat- batteries are being charged.
resistant gloves shall be used and, if required, other body protection
shall be applied. 3 When batteries are being charged, an explosive gas mixture forms in the
cells and might escape through the vent holes in the plugs.
21 When using cartridge type breathing filter equipment, ascertain that the Thus an explosive atmosphere may form around the battery if
correct type of cartridge is used and that its useful service life is not ventilation is poor, and can remain in and around the battery for several
surpassed. hours after it has been charged. Therefore:
22 Make sure that oil, solvents and other substances likely to pollute the - never smoke near batteries being, or having recently been, charged,
environment are properly disposed of. - never break live circuits at battery terminals, because a spark usually
occurs.
23 Before clearing the unit for use after maintenance or overhaul, check
that operating pressures, temperatures and speeds are correct and that 4 When connecting an auxiliary battery (AB) in parallel to the unit battery
the control and shutdown devices function correctly. (CB) with booster cables: connect the + pole of AB to the + pole of CB,
then connect the - pole of CB to the mass of the unit. Disconnect in the
reverse order.

1.6 TOOL APPLICATIONS SAFETY Pressure vessels

(according to directive 87/404/EEC annex II § 2)
Apply the proper tool for each job. With the knowledge of correct tool use Maintenance/installation requirements:
and knowing the limitations of tools, along with some common sense, many 1 The vessel can be used as pressure vessel or as separator and is designed
accidents can be prevented. to hold compressed air for the following application:
Special service tools are available for specific jobs and should be used when - pressure vessel for compressor,
recommended. The use of these tools will save time and prevent damage to - medium AIR/OIL,
parts. and operates as detailed on the data plate of the vessel:
- the maximum working pressure ps in bar,
- the maximum working temperature Tmax in °C,
- the minimum working temperature Tmin in °C,
- the capacity of the vessel V in l.
2 The pressure vessel is only to be used for the applications as specified
above and in accordance with the technical specifications. Safety
reasons prohibit any other applications.
3 National legislation requirements with respect to re-inspection must be
complied with.
4 No welding or heat treatment of any kind is permitted to those vessel
walls which are exposed to pressure.
5 The vessel is provided and may only be used with the required safety
equipment such as manometer, overpressure control devices, safety
valve, etc.
6 Draining of condensate shall be performed regularly when vessel is in
use.
7 Installation, design and connections should not be changed.
8 Bolts of cover and flanges may not be used for extra fixation.

Safety valves
All adjustments or repairs are to be done by an authorized representative of
the valve supplier (see maintenance schedule).

12
 ORDERING SPARE PARTS

ORDERING SPARE PARTS BESTELLUNG VON ERSATZTEILEN

Always quote the part number, the designation and the quantity of the Stets die Teilenummer, die Bezeichnung, und die Anzahl der gewünschten
parts required, as well as the type and the serial number of the machine. Teile sowie den Typ und die Seriennummer der Maschine angeben.
EXPLANATION OF THE COLUMNS INFORMATION ZU DEN SPALTEN
REF : REFERENCE CODE REF : REFERENZCODE
Establishes the connection between a part in the list and a part in the illus- Stellt die Verbindung zwischen einem Teil in der Liste und einem Teil auf
tration. der Zeichnung her. "–" bedeutet, daß das Teil nicht in der Zeichnung darg-
"–" means that the part is not shown in the illustration. estellt ist.
PART NUMBER PART NUMBER : TEILENUMMER
If no part number is given, the part cannot be obtained as a spare part. Wenn keine Teilenummer angegeben ist, ist das Teil nicht als Ersatzteil
Parts marked with a dot are part of the assembly listed right above them. erhältlich.
Mit einem Punkt markierte Teile gehören zu der Einheit, die über den jew-
DESIGNATION
eiligen Teilen aufgeführt ist.
Usually this is the name of the part. For standard parts, in addition to the
name, a number of characteristics are given. DESIGNATION : BEZEICHNUNG
Meistens die Bezeichnung des Teils. Bei Standardteilen werden neben der
QTY : QUANTITY
Bezeichnung einige technische Daten angegeben.
Indicates the quantity of the part concerned. "AR" stands for "As
Required". QTY : ANZAHL
Gibt die Anzahl des betreffenden Teils an. Die Angabe "AR" steht für "As
Required" (wie erforderlich).

BESTELLEN VAN ONDERDELEN PEDIDO DE PARTES

Vermeld steeds het onderdeelnummer, de benaming en het aantal van de Siempre comunicar el número de parte, la designación y la cantidad
gewenste stukken, evenals het type en het serienummer van de machine. deseada así como el tipo y el número de serie de la máquina.
TOELICHTING BIJ DE KOLOMMEN INFORMACIONES SOBRE LAS COLUMNAS
REF : REFERENTIECODE REF : CODIGO DE REFERENCIA
Legt het verband tussen een onderdeel uit de lijst en een onderdeel op de Establece la conexión entre una parte en la lista y una parte en la ilus-
tekening. "–" betekent dat het onderdeel niet is getekend. tración.
"–" quiere decir que la parte no está ilustrada.
PART NUMBER : ONDERDEELNUMMER
Indien niet opgegeven is het onderdeel niet als wisselstuk beschikbaar. PART NUMBER : NUMERO DE PARTE
Onderdelen aangeduid met een stip maken deel uit van het geheel dat Si no se da ningún número, quiere decir que la parte no está disponible
boven de betreffende onderdelen staat. como parte de recambio.
DESIGNATION : BENAMING Partes marcadas con un punto son partes del conjunto indicado más arriba.
Meestal de benaming van het onderdeel. In het geval van standaard onder- DESIGNATION : DESIGNACION
delen worden naast de benaming een aantal karakteristieken opgegeven. Principalmente el nombre de la parte. En caso de partes estándares, el
QTY : AANTAL nombre es seguido por especificaciones.
Geeft de hoeveelheid van het betreffende onderdeel weer. De aanduiding QTY : CANTIDAD
"AR" betekent "As Required" (zoals vereist). Indica la cantidad de la parte correspondiente. La indicación "AR" sig-
nifica "As Required" (como sea requerido).

COMMANDE DE PIÈCES DETACHEES BESTÄLLNING AV RESERVDELAR

Toujours indiquer le numéro de pièce, la désignation, la quantité désirée Ange alltid reservdelsnummer, benämning och kvantitet för varje önskad
ainsi que le type et le numéro de série du groupe. detalj samt maskinens typ och tillverkningsnummer.
EXPLICATION DES INTITULES DES COLONNES TÖRKLARING AV SPALTER
REF : CODE DE REFERENCE REF : REFERENSNUMMER
Réfère à la pièce détachée spécifiée dans la liste et sur l’illustration. "–" Identifierar motsvarande detaljer i listan och illustrationen. "–" betyder att
implique que la pièce n’est pas indiquée sur l’illustration. detaljen inte visas i illustrationen.
PART NUMBER : NUMERO DE PIECE DETACHEE PART NUMBER : RESERVDELSNUMMER
Si le numéro n’est pas indiqué, la pièce n’est pas disponible en tant que Om inget reservdelsnummer anges, kan detaljen inte erhållas som
pièce de rechange. reservdel. Detaljer som anges med en punkt ingår i den monteringssats
Les pièces indiquées par un point gras font partie de l’ensemble se trou- som listas ovanför dessa.
vant au-dessus des pièces détachées correspondantes.
DESIGNATION : BENÄMNING
DESIGNATION Detta är vanligen namnet på detaljen. För standarddetaljer anges förutom
En général, le nom de la pièce. S’il s’agit de pièces standard, outre la namnet ett antal specifikationer.
désignation, un certain nombre de caractéristiques sont indiquées.
QTY : KVANTITET
QTY : QUANTITE Anger den ifrågavarande detaljens kvantitet. "AR" (As Required) betyder
Indique la quantité de la pièce détachée. “AR” indique “As required”, enligt behov.
c’est-à-dire la quantité à déterminer selon le cas.

13
 ORDERING SPARE PARTS

ORDINAZIONE DI PARTI DI RICAMBIO ΠAPAΓΓEΛIA ANTAΛΛAKTIKΩN

Menzionare sempre il numero della parte, la denominazione e il numero Πάντοτε σηµειώνετε τον κωδικό, τον προσδιορισµό και την ποσότητα των
de pezzi desiderati, nonché il tipo e il numero di serie della macchina. απαιτούµενων ανταλλακτικών, καθώς επίσης τον τύπο και τον αύξοντα
SPIEGAZIONE DELLE COLONNE κωδικό αριθµό παραγωγής του µηχανήµατος.
REF : CODICE DI RIFERIMENTO EΞHΓHΣH TΩN ΣTHΛΩN
Stabilisce il nesso tra un pezzo nell'elenco e un pezzo nell'illustrazione.
REF : KΩ∆IKOΣ ANAΦOPAΣ
"–" siginfica che il pezzo non è presente nell'illustrazione.
Παρουσιάζει τη σχέση µεταξύ ενός εξαρτήµατος στη λίστα και ενός
PART NUMBER : NUMERO DELLA PARTE εξαρτήµατος στη φωτογραφία. Tο "–" σηµαίνει ότι το εξάρτηµα δεν
Nel caso non sia fornito il numerom di parte, il pezzo non puó essere ordi- εµφανίζεται στη φωτογραφία.
nato come parte di ricambio. PART NUMBER : KΩ∆IKOΣ APIΘMOΣ
Il componenti indicati con un puntino fanno parte del gruppo elencato
immediatamente sopra di essi. Aν δεν δίνεται κάποιος κωδικός αριθµός, τότε το εξάρτηµα δεν µπορεί να
ληφθεί ως ανταλλακτικό.
DESIGNATION : DENOMNAZIONE Tα εξαρτήµατα που έχουν µαρκαρισθεί µε µία τελεία είναι τµήµατα του
Generalmente si tratta della denominazione della parte. Per i pezzi stan- συγλροτήµατος που παρουσιάζεται ακριβώς πάνω από αυτά.
dard oltre alla denominazione sono fornite alcune caratteristiche.
DESIGNATION : ΠPOΣ∆IOPIΣMOΣ
QTY : QUANTITA' Συνήθως αυτό είναι το όνοµα του εξαρτήµατος. Για τα βασικά
Indica la quantità dei pezzi in questione. "AR" significa "As Required" εξαρτήµατα, επιπροσθέτα στην ονοµασία, δίνεται και ένας αριθµός
(Come richiesto). χαρακτηριστικών.
QTY : ΠOΣOTHTA
∆ηλώνει την ποσότητα του υπόψη εξαρτήµατος. “AR” σηµαίνει “Ως
απαιτείται”. Για τα βασικά εξαρτήµατα, η ποσότητα δίνεται στη
φωτογραφία παρά στη λίστα.

BESTÄLLNING AV RESERVDELAR ONCOMENDAS DE PEÇAS

Ange alltid reservdelsnummer, benämning och kvantitet för varje önskad Refira sempre o número da peça, a designação e a quantidade das peças
detalj samt maskinens typ och tillverkningsnummer. que pretende encomendar, assim como o tipo e o número de série do
aparelho.
TÖRKLARING AV SPALTER
EXPLICAÇÃO DAS COLUNAS
REF : REFERENSNUMMER
Identifierar motsvarande detaljer i listan och illustrationen. "–" betyder att REF : CÓDIGO DE REFERÉNCIA
detaljen inte visas i illustrationen. Estabeleça a ligação entre a peça na lista e a peça no desenho. "–" significa
que a peça não vem no desenho.
PART NUMBER : RESERVDELSNUMMER
Om inget reservdelsnummer anges, kan detaljen inte erhållas som PART NUMBER : NÚMERO DA PEÇA
reservdel. Detaljer som anges med en punkt ingår i den monteringssats Se não vier referido o número da peça, a peça não pode ser adquirida como
som listas ovanför dessa. peça sobressalente.
DESIGNATION : BENÄMNING As peças marcadas com pontos são peças de um conjunto listado acima
dessa peça.
Detta är vanligen namnet på detaljen. För standarddetaljer anges förutom
namnet ett antal specifikationer. DESIGNATION : DESIGNAÇÃO
QTY : KVANTITET Geralmente é o nome da peça. Para peças normalizadas, além do nome da
peça, vem também referido um número.
Anger den ifrågavarande detaljens kvantitet. "AR" (As Required) betyder
enligt behov. QTY : QUANTIDADE
Indica a quantidade da peça em questão. "AR" (As Required) quer dizer
“Como solicitado”.

BESTILLING AV RESERVEDELER VARAOSIEN TILAAMINEN

Oppgi alltid delenummer, betegnelse og antall på de delene du trenger, Tilauksessa tulee aina mainita osanumero, nimike ja määrä sekä kompres-
samt maskintype og serienummer. sorin tyyppi ja sarjanumero.
FORKLARING TIL SPALTENE SARAKKEIDEN SELITYKSET
REF: REFERANSEKODE REF: VIITE: VIITEKOODI
Viser hvor en del i listen er vist på illustrasjonen. Viitekoodi yhdistää luettelossa mainitun osan kuvassa olevaan. "_"
"-" betyr at delen ikke er vist på illustrasjonen. tarkoittaa, että osaa ei ole merkitty kuvaan.
DELENUMMER PART NUMBER: OSANUMERO
Hvis delenummer ikke er oppgitt, kan delen ikke bestilles som reservedel. Ellei osanumeroa ole mainittu, osaa ei ole saatavana varaosana. Pisteellä
Deler merket med en prikk er del av enheten som er oppgitt like ovenfor merkityt osat kuuluvat niiden edellä mainittuun asennelmaan.
de aktuelle delene.
DESIGNATION: NIMIKE
BETEGNELSE Nimikkeenä käytetään tavallisesti osan nimeä. Vakio-osien ollessa
Dette er vanligvis delens navn. Ved standarddeler blir enkelte karakteris- kyseessä mainitaan nimen lisäksi osan joitakin ominaisuuksia.
tika oppgitt i tillegg til navnet.
QTY: MÄÄRÄ
QTY: ANTALL Tarkoittaa kyseisten osien lukumäärää. "AR" tarkoittaa "tarpeen mukaan".
Oppgir antallet av den aktuelle delen. "EB" betyr "Etter behov".

14
 ORDERING SPARE PARTS

ZAMAWIANIE CZĘŚCI ZAMIENNYCH PÓTALKAKTRÉSZ-RENDELÉS

Należy zawsze podawać numery, nazwy i ilości potrzebnych części, a Mindig jelezze a szükséges alkatrész számát, megnevezését és
także typ i numer seryjny maszyny. mennyiségét , valamint a gép típusát és sorozatszámát.
WYJAŚNIENIE PRZEZNACZENIA KOLUMN AZ OSZLOPOK MAGYARÁZATA
REF: KOD REFERENCYJNY REF: REFERENCIAKÓD
Kojarzy część na liście z częścią na ilustracji. Ez teremt kapcsolatot a listán szereplő alkatrész és az ábrán látható
Symbol “–” oznacza, że część nie jest przedstawiona na ilustracji. alkatrész között.
PART NUMBER (NUMER CZĘŚCI) “–”: azt jelenti, hogy az adott alkatrész nem szerepel az ábrán.
Brak numeru oznacza, że dana część nie jest dostępna jako część ALKATRÉSZ-SZÁM
zamienna. Ha nincsen megadva alkatrész-szám, akkor az adott alkatrész nem
Części oznaczone kropką należą do zespołu wymienionego bezpośrednio rendelhető meg pótalkatrészként.
nad nimi. A ponttal jelölt alkatrészek a közvetlenül fölöttük felsorolt szerelvény
részét képezik.
DESIGNATION (NAZWA)
Zwykle jest to nazwa części. W przypadku części standardowych oprócz MEGNEVEZÉS
nazwy podano szereg właściwości. Rendszerint ez az alkatrész neve. Az alapfelszereltséghez tartozó
alkatrészek esetében a név mellett néhány jellemzõ adat is szerepel.
QTY (IL.): ILOŚĆ
Ilość części danego rodzaju. “AR” (“OP”) oznacza “odpowiednio do QTY: MENNYISÉG
potrzeb”. Az adott alkatrész mennyiségét jelzi. “SZ” jelentése “Szükség szerint”

Заказ запасных частей 订购备件

Необходимо всегда указывать номер детали, наименование и 请务必提供所需部件的部件号、名称和数量，以及设备型号和序列
количество заказываемых запчастей, а также тип и серийный 号。
номер устройства. 表格各列说明
Расшифровка столбцов REF：参考代码
ИЛЛ. : код сноски 确立列表内部件与插图内部件间的联系。
“–”表示插图内未显示此部件。
Показывает ссылку детали в списке на ее соответствующую
иллюстрацию. 部件号
"–" означает, что к данной детали нет иллюстраций. 如果未给出部件号，则表明无法通过备件方式购买此部件。
标有圆点的部件是其上一行所列配件的一部分。
НОМЕР ДЕТАЛИ
名称
Отсутствие номера детали означает, что данная деталь как 通常为部件的名称。对于标准件，除了名称外，还会列出它的一些
запчасть не поставляется. 特性。
Детали, помеченные точкой, являются частями сборного QTY：数量
механизма, который указан над этими деталями. 表明可供部件的数量。“AR”代表 “根据需要”
НАИМЕНОВАНИЕ
Обычно, название детали. К стандартным деталям, кроме
названия, могут быть даны некоторые их характеристики.
КОЛ-ВО: Количество
Показывает количество деталей. «По тр.» означает «по
требованию».

OBJEDNÁVÁNÍ NÁHRADNÍCH DÍLÙ OBJEDNÁVANIE NÁHRADNÝCH SÚČIASTOK

V objednávce vždy uveïte èíslo dílu, jeho oznaèení a požadované Uvádzajte vždy číslo súčiastky, označenie a množstvo požadovaných
množství. Rovnìž tak udejte typ a výrobní èíslo zaøízení. súčiastok, ako aj typ a výrobné číslo stroja.
VYSVÌTLIVKY K JEDNOTLIVÝM SLOUPCÙM VYSVETLENIE STĹPCOV
REF : REFERENÈNÍ KÓD REF : REFERENČNÝ KÓD
Udává spojitost mezi dílem v seznamu a dílem na obrázku. Stanovuje spojitost’ medzi súčiastkou v zozname a súčiastkou na obrázku.
“–” znamená, že díl není na obrázku uveden. "–" znamená, že súčiastka nie je zobrazená na obrázku.
ÈÍSLO DÍLU ČÍSLO SÚČIASTKY
Pokud není číslo dílu uvedeno, nelze tuto součást objednat jako náhradní Ak nie je uvedené žiadne číslo súčiastky, táto súčiastka nie je k dispozícii
díl. ako náhradná.
Díly označené tečkami jsou součástí konstrukčního celku, který je uveden Súčiastky označené bodkou sú čast’ou zostavy uvedenej hneď nad nimi.
přímo nad nimi. OZNAČENIE
OZNAÈENÍ Obyčajne je to názov súčiastky. U normalizovaných súčiastok sa okrem
Ve sloupci označení bývá obvykle uveden název dílu. U standardních názvu uvádza aj niekoľko charakteristík
součástí je vedle názvu uváděna též řada dalších charakteristik. QTY : MNOŽSTVO
POÈET : MNOŽSTVÍ Označuje množstvo danej súčiastky. "AR" je skratka pre “Podľa potreby”.
Oznaèuje množství uvedených dílù. Zkratka “PP” znamená “Podle
požadavku”.

15
 ORDERING SPARE PARTS

NAROČEVANJE NADOMESTNIH DELOV VARUOSADE TELLIMINE

Zmeraj navedite številko nadomestnega dela, označbo in količino Alati viidake osa numbrile, tähisele ja vajalikule osade kogusele, samuti
potrebnih delov ter tip in serijsko številko stroja. masina tüübile ja seerianumbrile.
RAZLAGA STOLPCEV SELGITUS VEERGUDE KOHTA
REF : REFERENČNA ŠIFRA REF : VIITENUMBER
Predstavlja povezavo med delom na seznamu in delom na ilustraciji. Loob seose nimekirjas toodud osa ja illustratsioonil esitatud osa vahel.
“-” predstavlja del, ki ni prikazan na ilustraciji. "–" tähendab, et illustratsioonil ei ole seda osa kujutatud.
ŠTEVILKA DELA OSA NUMBER
Če številka dela ni podana potem je ne morete dobiti kot nadomestni del. Kui osa numbrit ei ole toodud, pole seda osa võimalik varuosana soetada.
Deli označeni s piko so sestavni del montaže, navedene nad njimi. Punktiga tähistatud osad on nende kohal toodud koostu osaks.
OZNAČBA TÄHIS
Običajno je to ime nadomestnega dela. Pri standardnih delih je poleg Tavaliselt on see osa nimetus. Standardosadel on lisaks nimetusele toodud
imena podano še število značilnosti. ka tunnusnumber.
QTY : KOLIČINA QTY : KOGUS
Označuje količino nadomestnih delov. “AR” pomeni “kot je bilo Osutab vastava osa kogusele. "AR" tähendab vajadusel ("As Required").
zahtevano”.

ATSARGINIØ DALIØ UÞSAKYMAS REZERVES DAÏU PASÛTÎÐANA

Visuomet nurodykite dalies numerá, pavadinimà ir reikiamà daliø kieká, Vienmçr miniet daïas numuru, apzîmçjumu un nepiecieðamo detaïu
taip pat ir maðinos tipà bei serijiná numerá. daudzumu, kâ arî maðînas tipu un sçrijas numuru.
STULPELIØ PAAIÐKINIMAI AIÏU IZSKAIDROJUMS
NRD.: NUORODOS KODAS REF : ATSAUKSMES KODS
Susieja sàraðe nurodytà dalá su jos atvaizdu iliustracijoje. Izveido saikni starp detaïu sarakstâ un detaïu uz attçla.
“–” reiðkia, jog dalis iliustracijoje nepavaizduota. "–" nozîmç, ka detaïa nav attçlota ilustrâcijâ.
DALIES NUMERIS DETAÏAS NUMURS
Jei numerio nenurodyta, detalës negalima ásigyti kaip atsarginës dalies. Ja detaïas numurs nav minçts, tad detaïu nevar iegût kâ rezerves daïu.
Taðku paþymëtos dalys yra prieð jas sàraðe nurodyto mazgo sudëtinë Ar punktu apzîmçtâs detaïas ir mezgla sastâvdaïas, kurð ir attçlots tieði
dalis. virs tâm.
PAVADINIMAS APZÎMÇJUMS
Paprastai tai dalies pavadinimas. Standartinëms dalims kartu su Parasti tas ir detaïas nosaukums. Standarta detaïâm, papildus
pavadinimu nurodomos ir kelios charakteristikos. nosaukumam, tiek minçta virkne raksturojumu \ specifikâciju.
KIEK.: KIEKIS QTY : DAUDZUMS
Nurodo susijusiø daliø kieká. “AR” reiðkia “As required” (pagal poreiká). Norâda domâtâs detaïas daudzumu. "AR" nozîmç "As Required" – “kâ
nepiecieðams”.

16
 SERVICE PAK

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- WITH UNIT SERVICE PAK 50H XAHS 186 - 2912 4332 06 SERVICE PAK YEARLY 1000H
•10 - FLAT GASKET 1 •10 - FLAT GASKET 1
•20 - GASKET ROCKER COVER 1 •20 - GASKET ROCKER COVER 1
•30 - FILTER 1 •25 - SEALING WASHER 1
•40 - FUELFILTER CARTRIDGE 1 •30 - FILTER 1
•50 - FUEL FILTER EL 1 •40 - FUELFILTER CARTRIDGE 1
•80 - FLAT GASKET 1 •50 - FUEL FILTER EL 1
•120 - OILFILTER 1 •60 - AIR FILTER ELEMENT 1
•65 - SAFETY CARTRIDGE 15Mÿ 1
•70 - V BELT ALTERNATOR 1
•75 - VBELT COOL/FUEL PUMP 1
•76 - V BELT FAN DRIVE 1
•77 - FUEL LINES/CONECT ASSY 1
- 2912 4331 05 SERVICE PAK 500H 1
•80 - FLAT GASKET 1
•10 - FLAT GASKET 1 •90 - SEALING WASHER 1
•30 - FILTER 1 •100 - FLAT GASKET 1
•50 - FUEL FILTER EL 1 •105 - FLAT GASKET 1
•80 - FLAT GASKET 1 •110 - SEALING WASHER 1
•120 - OILFILTER 1
•130 - AIR FILTER ELEMENT 1
•135 - SAFETY CARTRIDGE 15Mÿ 1

17
 ENGINE OIL
PAROIL 5W40

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

A 1604 6060 01 PAROIL 5W40 5 LITER CAN 1

B 1604 6059 01 PAROIL 5W40 20 LITER CAN 1

18
 ENGINE OIL
PAROIL 15W40

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

A 1615 5953 00 PAROIL 15W40 5 LITER CAN 1

B 1615 5954 00 PAROIL 15W40 20 LITER CAN 1
C 1615 5955 00 PAROIL 15W40 210 LITER BARREL 1

19
 COMPRESSOR OIL
PAROIL M

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

PAROIL M
A 1615 5947 00 OIL CAN 5 L 1
B 1615 5948 00 OIL CAN 20 L 1
C 1615 5949 00 STEEL DRUM 210 L 1

20
 COMPRESSOR OIL
PAROIL S

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

PAROIL S
A 1615 5950 01 OIL CAN 5 L 1
B 1615 5951 01 OIL CAN 20 L 1
C 1615 5952 01 STEEL DRUM 210 L 1
D 1604 7422 00 CONTAINER 1000 L 1

21
 COMPRESSOR OIL
PAROIL S 68

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

PAROIL S 68
A 1604 7136 00 OIL CAN 20 L 1
B 1604 7136 00 STEEL DRUM 210 L 1

22
 ENGINE COOLANT
PARCOOL EG

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

A 1604 5308 00 PARCOOL EG 5 LITER CAN 1

B 1604 5307 01 PARCOOL EG 20 LITER CAN 1
C 1604 5306 00 PARCOOL EG 210 LITER BARREL 1
D 1604 8159 00 PARCOOL EG CONCENTRATE 1
5 LITER CAN

23
 SERVICE KIT
SPEED REGULATOR

2911 0052 00_00

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 2911 0052 00 SERVICE KIT SPEED REGULATOR

• 20 - PISTON SEAL 1
• 25 - WIPER 1

24 2911 0052 00/00

 SERVICE KIT
UNLOADING VALVE

140
50
120

40

130

10

100
20

90

60

110

70

80

150 2911 0074 00_00

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 2911 0074 00 SERVICE KIT UNLOADING VALVE

•10 - VALVE (UNLOADING) 1
•20 - SPRING 1
•40 - PISTON SEAL 1
•50 - LOCKNUT 1
•60 - O-RING 1
•70 - O-RING 1
•80 - O-RING 1
•90 - VALVE 1
•100 - O-RING 1
•110 - O-RING 1
•120 - PLAIN WASHER 1
•130 - O-RING 1
•140 - O-RING 1
•150 - O-RING 1

2911 0074 00/00 25

 SERVICE KIT
OIL SEPARATOR

20

30

10

2911 0075 00_01

40

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 2911 0075 00 SERVICE KIT OIL SEPARATOR

•10 - OIL.SEP.ELEMENT 1
•20 - O-RING 1
•30 - SEAL 1
•40 - SEAL (OIL SEPARATOR) 1

26 2911 0075 00/01

 SERVICE KIT
REGULATING VALVE

50

30

20

10

40

60

2911 0090 00_00

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 2911 0090 00 SERVICE KIT REGULATING VALVE

•10 - SPRING 1
•20 - BEARING BALL 1
•30 - MEMBRANE 1
•40 - O-RING 1
•50 - O-RING 1
•60 - O-RING 1

2911 0090 00/00 27

 SERVICE KIT
LOADING VALVE

2911 0092 00_00

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 2911 0092 00 SERVICE KI T LOADING VALVE

•10 - O-RING 1
•20 - O-RING 1
•30 - O-RING 2

28 2911 0092 00/00

 SERVICE KIT
ELEMENT MOUNTING

2911 0094 00_01

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 2911 0094 00 SERVICE KIT ELEMENT MOUNTING

•10 - O-RING 1
•15 - RETAINER 1
•20 - LIP SEAL 1
•30 - O-RING 1
•40 - O-RING 1
•50 - O-RING 1
•60 - O-RING 1
•70 - O-RING 1
•80 - SEAL 1
•90 - O-RING 1
•100 - O-RING 2
•110 - O-RING 2
•120 - O-RING 2
•130 - FLAT GASKET 1
•135 - FLAT GASKET 1
•140 - FLAT GASKET 1

2911 0094 00/01 29

 SERVICE KIT
BRAKE SHOES

2911 0095 00_00

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 2911 0095 00 SERVICE KIT BRAKE SHOES

• 10 - BRAKE SHOE 4
• 20 - SPRING 2
• 30 - SPRING 2
• 40 - SPRING 4
• 50 - PIN 4

30 2911 0095 00/00

 SERVICE KIT
ROAD AXLE BEARINGS

2911 0096 00_00

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 2911 0096 00 SERVICE KIT ROAD AXLE BEARING

• 10 - BEARING 1
• 20 - BEARING 1
• 30 - CAP 1
• 40 - CASTLED NUT 1
• 50 - SPLIT PIN 1
• 60 - SEAL RING 1
• 70 - RING 1

2911 0096 00/00 31

 STANDARD
FRAME AND MOUNTS

1611 7020 28_27

32 1611 7020 28/27

 STANDARD
FRAME AND MOUNTS

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0250 81 FRAME 1

(For details see page 65)
50 1604 0252 01 PLATE 1
60 1619 2766 00 HEX. HEAD SCREW 2
70 1619 5044 00 VIBR. DAMPER 2
75 0147 1400 03 HEX. HEAD SCREW 4
76 0301 2358 00 PLAIN WASHER 2
80 1604 0256 01 SUPPORT 2
85 0147 1482 03 HEX. HEAD SCREW 4
90 0147 1487 03 HEX. HEAD SCREW 2
100 1619 5044 00 VIBR. DAMPER 2
105 0147 1400 03 HEX. HEAD SCREW 4
106 0301 2358 00 PLAIN WASHER 2
110 1604 7765 00 SUPPORT 1
115 0147 1401 15 HEX. HEAD SCREW 4
120 0147 1476 03 HEX. HEAD SCREW 2
130 1604 1457 00 BRACKET 1
135 0147 1322 03 HEX. HEAD SCREW 4
140 0301 2335 00 PLAIN WASHER 8
145 0333 3227 00 LOCK WASHER 4
147 0266 2110 00 HEXAGON NUT 4
150 1604 0257 03 LIFTING EYE 1
155 0302 1274 04 PLAIN WASHER 4
160 0147 1476 03 HEX. HEAD SCREW 4
180 1604 0258 02 TOOL BOX 1
185 0147 1398 03 HEX. HEAD SCREW 4
190 0301 2358 00 PLAIN WASHER 4
200 1604 0259 01 COVER 1
205 1619 2766 00 HEX. HEAD SCREW 3
300 0147 1400 03 HEX. HEAD SCREW 4
305 0301 2358 00 PLAIN WASHER 4
310 1616 4613 00 RETAINER 4
315 1616 4614 00 NYLON BAND 2
316 1616 4615 00 NYLON BAND 2
350 1604 0315 00 TUBE (FOR BUMPER) 1
360 1619 2766 00 HEX. HEAD SCREW 3
365 1615 8790 01 PLUG 2
400 1604 4318 00 SEAL AR

1611 7020 28/27 33

 STANDARD
FUEL SYSTEM

1611 7050 27_12

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0261 85 FUELTANK ASSY 1 205 0347 6104 00 HOSE CLAMP 2

(For details see page 66) 225 1604 1514 00 BRACKET 1
30 0147 1322 03 HEX. HEAD SCREW 2 230 1089 9326 01 PUSH BUTTON 1
35 0301 2335 00 PLAIN WASHER 2 245 1604 0294 00 BRACKET 1
36 0211 1329 00 HEX SOCK. SCREW 1 250 1089 0631 03 FUEL GAUGE 1
40 1604 0416 00 STRAP 1 255 0277 1130 03 HEXAGON DOMED CAP NUT 1
45 0266 2110 00 HEXAGON NUT 1 265 0147 1322 03 HEX. HEAD SCREW 1
60 1615 5289 01 LEVEL GAUGE 1 270 0301 2335 00 PLAIN WASHER 1
100 1615 7397 00 FUELFILTER (WATERSEP.) 1 275 0333 3227 00 LOCK WASHER 1
105 1615 5664 00 SCRAPER BOLT 2 280 0266 2110 00 HEXAGON NUT 1
115 0266 2111 00 HEXAGON NUT 2
120 0072 8402 90 HOSE AR
130 1604 0265 01 HOSE NIPPLE 1
135 0347 6104 00 HOSE CLAMP 2
150 0072 8402 90 HOSE AR
155 1604 0265 01 HOSE NIPPLE 1
165 1604 0269 01 HOSE NIPPLE 1
170 0653 1100 00 FLAT GASKET 1
175 0347 6104 00 HOSE CLAMP 2
200 0071 8402 68 FUEL HOSE AR

34 1611 7050 27/12

 STANDARD
GEARCASING AND MOUNTS

1611 7130 28_01

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0291 01 GEAR CASING 1 360 0101 1951 40 PARALLEL PIN 2

40 0502 1090 21 BALL BEARING 1 380 - O-RING 1
60 0504 0200 13 BALL BEARING 1 (Part of service kit, see page 29)
80 - O-RING 1 400 0147 1365 03 HEX. HEAD SCREW 12
(Part of service kit, see page 29) 460 0211 1964 15 HEX SOCK. SCREW 12
100 - RETAINER 1
(Part of service kit, see page 29)
120 0335 2169 00 CIRCLIP 1
140 1202 6454 00 BUSHING 1
160 - LIP SEAL 1
(Part of service kit, see page 29)
220 - O-RING 1
(Part of service kit, see page 29)
240 1622 5542 00 OIL NOZZLE 1
260 3161 0388 00 HEXAGON BOLT 1
280 1604 0272 00 BUSHING 1
300 0337 7152 00 PARALLEL KEY 1
310 1604 0287 00 WASHER 1
320 0147 1408 15 HEX. HEAD SCREW 1
340 1616 7281 90 SERVICE STAGE O.I.S. K-36 1

1611 7130 28/01 35

 STANDARD
ENGINE AND ACCESSORIES

Engine Part

1611 7082 28_01

36 1611 7082 28/01

 STANDARD
ENGINE AND ACCESSORIES

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0498 01 ENGINE XAHS 186 1

30 1604 1238 00 GASKET 1
40 1604 0927 02 EXXHAUST ELBOW 1
60 0301 2335 00 PLAIN WASHER 4
80 0211 1325 03 HEX SOCK. SCREW 4
120 1604 0274 01 EXHAUST PIPE 1
140 0346 2900 19 CLAMP 2
150 1604 0436 01 PLATE 1
155 1615 5664 00 HEX. HEAD SCREW 6
160 1604 0433 01 SILENCER 1
165 1604 0438 01 INSULATION 1
180 1615 5664 00 HEX. HEAD SCREW 4
300 1604 1505 00 HOSE ASSY 1
310 0580 0014 55 STRAIGHT PIPE-COUPLING 1
320 0653 1115 00 FLAT GASKET 2
330 1615 8785 00 PROTECTION 1
335 0129 3174 01 BLIND RIVET 2
340 0301 2318 00 PLAIN WASHER 2
350 1604 1578 00 PROTECTION 1
355 0147 1323 03 HEX. HEAD SCREW 2
360 0333 3227 00 LOCK WASHER 2
365 0266 2110 00 HEXAGON NUT 2
400 0070 6002 27 PLASTIC TUBE AR
410 0347 6108 00 HOSE CLAMP 2

1611 7082 28/01 37

 STANDARD
COUPLING

45

85

80

60 40

1611 7200 27_01

70 25 50

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

25 1604 0300 00 COUPLING HUB 1

40 1604 0329 00 COUPLING RING 1
45 0147 1329 03 HEX. HEAD SCREW 12
50 1604 1408 00 COUPLING 1
60 0211 1363 00 HEX SOCK. SCREW 6
70 0337 7198 00 PARALLEL KEY 1
80 1604 0287 00 WASHER 1
85 0147 1408 15 HEX. HEAD SCREW 1

38 1611 7200 27/01

 STANDARD
OIL SYSTEM

See Page 62
See Page 56

1611 7282 27_01

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0371 01 HOSE ASSEMBLY 1

60 1619 5509 00 NIPPLE 1
65 0661 1038 00 SEALING WASHER 1
100 1604 0375 03 HOSE ASSEMBLY 1
140 1619 5509 00 NIPPLE 1
145 0661 1038 00 SEALING WASHER 1
190 0147 1474 03 HEX. HEAD SCREW 1
200 0301 2378 00 PLAIN WASHER 1
300 1619 5509 00 NIPPLE 1
305 0661 1038 00 SEALING WASHER 1
320 1619 5509 00 NIPPLE 1
325 0661 1038 00 SEALING WASHER 1
480 0653 1043 00 FLAT GASKET 1
500 1079 5840 01 HEXAGON NIPPLE 1
520 0575 0461 40 HOSE ASSEMBLY 1
540 0581 0000 52 STRAIGHT PIPE COUPLING 1

1611 7282 27/01 39

 STANDARD
REGULATING SYSTEM

505
500
566
635
615
630
612 625 500
620 607
610 120
570 600
605 290
607 510
565 160 300
550 490
485
80
515

555 140
560 180 310
320

220

530

525
20

520

60

50

40

495

1611 7230 28_14

40 1611 7230 28/14

 STANDARD
REGULATING SYSTEM

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0306 83 UNLOADING VALVE 1

(For details see page 68)
40 - O-RING 1
(Part of service kit, see page 25, 29)
50 0301 2344 00 PLAIN WASHER 4
60 0211 1360 03 HEX SOCK. SCREW 4
80 1604 1289 00 LEVER (ACT. UNIT) 1
120 0147 1246 03 HEX. HEAD SCREW 1
140 0301 2335 00 PLAIN WASHER 1
160 1604 0321 80 ACTUATING UNIT (ASSY) 1
(For details see page 70)
180 0301 2335 00 PLAIN WASHER 1
220 0291 1110 00 LOCKNUT 1
290 1604 0327 00 BUSH 1
300 0147 1247 03 HEX. HEAD SCREW 1
310 0301 2321 00 PLAIN WASHER 2
320 0291 1108 00 LOCKNUT 1
485 0582 1200 06 STRAIGHT PIPE COUPLING 1
490 0661 1014 00 SEALING WASHER 1
495 0070 6002 04 PLASTIC TUBE AR
500 0582 1200 07 ELBOW PIPE COUPLING 2
505 0070 6002 04 PLASTIC TUBE AR
510 0581 2000 23 TEE PIPE COUPLING 1
515 0070 6002 05 PLASTIC TUBE AR
520 0661 1014 00 SEALING WASHER 1
525 0582 1200 06 STRAIGHT PIPE COUPLING 1
530 0070 6002 05 PLASTIC TUBE AR
550 1604 0341 00 PIPE COUPLING 1
555 0070 6002 10 PLASTIC TUBE AR
560 0070 6002 05 PLASTIC TUBE AR
565 0395 1010 35 INSULATION HOSE 1
566 1202 8335 00 RING 1
570 1088 0830 10 CABLE CLAMP 6
600 1503 2566 01 TEE 1
605 0653 1043 00 FLAT GASKET 1
607 0661 1014 00 SEALING WASHER 2
610 0582 1200 05 STRAIGHT PIPE COUPLING 1
612 0580 0013 29 STRAIGHT PIPE-COUPLING 1
615 1615 7264 00 PRESSURE GAUGE 1
620 0653 1043 00 FLAT GASKET 1
625 0580 0013 29 STRAIGHT PIPE-COUPLING 1
630 0582 1200 05 STRAIGHT PIPE COUPLING 1
635 0653 1046 00 FLAT GASKET 1

1611 7230 28/14 41

 STANDARD
COOLER AND FAN

1611 7260 28_10

42 1611 7260 28/10

 STANDARD
COOLER AND FAN

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 9292 00 RADIATOR 1

25 0686 3716 02 HEXAGON PLUG 1
30 0661 1033 00 SEALING WASHER 1
40 1604 9294 00 COOLER 1
41 1619 5509 00 NIPPLE 2
42 0661 1038 00 SEALING WASHER 2
45 0686 3716 02 HEXAGON PLUG 1
50 0661 1033 00 SEALING WASHER 1
60 1604 9293 00 COOLER 1
70 1604 1423 00 SUPPORT 1
72 1615 5664 00 HEX. HEAD SCREW 2
74 0147 1321 03 HEX. HEAD SCREW 6
76 0301 2335 00 PLAIN WASHER 6
80 1604 0928 03 FAN COWL 1
90 0147 1321 03 HEX. HEAD SCREW 6
95 0301 2335 00 PLAIN WASHER 6
100 1615 5664 00 HEX. HEAD SCREW 5
105 0147 1321 03 HEX. HEAD SCREW 6
106 0301 2335 00 PLAIN WASHER 6
115 1604 1290 01 FANGUARD 2
120 1615 5664 00 HEX. HEAD SCREW 9
125 1604 1438 01 BELT GUARD 1
130 1615 5664 00 HEX. HEAD SCREW 4
200 1604 1333 01 ADAPTER 1
210 0147 1327 03 HEX. HEAD SCREW 2
220 0301 2335 00 PLAIN WASHER 2
225 0246 1202 02 STUD 2
230 0266 2110 00 HEXAGON NUT 2
235 0301 2335 00 PLAIN WASHER 2
250 1604 1427 02 FAN 1
260 0147 1323 03 HEX. HEAD SCREW 6
270 0301 2335 00 PLAIN WASHER 6

1611 7260 28/10 43

 STANDARD
ENGINE COOLING

170

160
165
162

225
165

163
220
215

240
210

405
230
310
400

60
240
200

300
210

120

40
310

60
320
330 330
325 120

100
330 325

330

1611 7264 28_17

44 1611 7264 28/17

 STANDARD
ENGINE COOLING

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

40 1604 1240 01 PIPE 1

60 0347 6100 19 HOSE CLAMP 2
100 1604 1241 03 PIPE 1
120 0347 6100 19 HOSE CLAMP 2
160 1604 0510 01 TOPTANK 1
162 1615 6650 00 RADIATOR CAP 1
163 1089 0568 12 LEVEL SWITCH 1
165 0653 1133 00 FLAT GASKET 2
170 1604 0511 00 BANJO BOLT 1
200 1604 0346 00 HOSE 1
210 0347 6110 00 HOSE CLAMP 2
215 0147 1322 03 HEX. HEAD SCREW 2
220 0333 3227 00 LOCK WASHER 2
225 1604 4483 00 BRACKET 1
230 0071 8402 68 FUEL HOSE AR
240 0347 6103 00 HOSE CLAMP 2
300 1604 0361 02 HOSE INTERCOOLER 1
310 0347 6100 21 HOSE CLAMP 2
320 1604 1242 00 PIPE 1
325 1604 0363 00 HOSE 2
330 0347 6100 21 HOSE CLAMP 4
400 1613 0808 02 BRACKET 1
405 1088 1301 04 CABLE STRIP 1

1611 7264 28/17 45

 STANDARD
AIR OUTLET

See Page 60

See Page 59 1611 7370 28_03

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 6945 04 MANIFOLD 1 360 1615 9474 81 BALL VALVE ASSY 1

40 0663 7138 00 O-RING 1 •A20 1615 9474 01 VALVE HOUSING 1
50 0663 7119 00 O-RING 1 •Α25 0194 1169 00 SET SCREW 1
380 0147 1323 03 HEX. HEAD SCREW 2
60 0663 7141 00 O-RING 1
400 0333 3227 00 LOCK WASHER 2
80 0211 1964 15 HEX SOCK. SCREW 4
100 0686 3716 01 HEXAGON PLUG 1 420 1604 0404 00 PIPE 1
425 0623 2100 12 BACKNUT 1
105 - FLAT GASKET 1
430 0852 0010 30 BALL VALVE 1
(Part of service kit, see page 29)
120 1604 0358 00 HOSE ASSEMBLY 1
125 0211 1964 10 HEX SOCK. SCREW 4
130 0333 3237 00 LOCK WASHER 4
135 - O-RING 2
(Part of service kit, see page 29)
170 - O-RING 2
(Part of service kit, see page 29)
200 1604 0406 80 MINIMUM PRESSURE VALVE 1
210 0147 1323 03 HEX. HEAD SCREW 4
215 0333 3227 00 LOCK WASHER 4
260 - O-RING 2
(Part of service kit, see page 29)

46 1611 7370 28/03

 STANDARD
SAFETY AND CONTROL

1611 7460 27_08

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0471 85 INSTRUM PANEL ASSY 1

(For details see page 73)
25 0147 1244 03 HEX. HEAD SCREW 4
30 0301 2321 00 PLAIN WASHER 4
50 1619 6201 00 PLUG 1
60 1604 1456 02 BRACKET 1
65 1503 1056 00 SEAL AR
70 0147 1323 03 HEX. HEAD SCREW 2
85 0301 2335 00 PLAIN WASHER 2
90 0333 3227 00 LOCK WASHER 2
95 0266 2110 00 HEXAGON NUT 2
100 1615 7831 02 TEMPERATURE SWITCH 1
105 0661 1033 00 SEALING WASHER 1

1611 7460 27/08 47

 STANDARD
AIR INLET

1611 7410 28_05

48 1611 7410 28/05

 STANDARD
AIR INLET

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

40 1604 0752 01 AIRFILTER 1

• A20 1613 8004 00 AIRFILTER ELEMENT 1
• A25 2914 9311 00 SAFETY CARTRIDGE 1
50 1615 9439 00 CLAMP 1
55 0147 1249 03 HEX. HEAD SCREW 2
60 0301 2321 00 PLAIN WASHER 2
65 0291 1108 00 LOCKNUT 2
75 1604 1472 01 PIPE 1
90 1615 9438 00 HOSE 1
95 0347 6119 00 HOSE CLAMP 2
97 1604 0495 00 HOSE 1
98 0347 6114 00 HOSE CLAMP 1
100 0347 6131 00 HOSE CLAMP 1
105 1613 7912 01 INDICATOR 1
115 0661 1014 00 SEALING WASHER 1
120 1612 2152 00 NIPPLE 1
125 0653 1046 00 FLAT GASKET 1
130 1604 0409 02 SUPPORT 1
135 0147 1398 03 HEX. HEAD SCREW 4
140 0301 2358 00 PLAIN WASHER 4
145 1604 0752 01 AIRFILTER 1
• A20 1613 8004 00 AIRFILTER ELEMENT 1
• A25 2914 9311 00 SAFETY CARTRIDGE 1
155 1615 9439 00 CLAMP 1
165 0147 1249 03 HEX. HEAD SCREW 2
170 0301 2321 00 PLAIN WASHER 2
175 0291 1108 00 LOCKNUT 2
190 1604 0411 01 AIRDUCT 1
205 1615 9438 00 HOSE 2
210 0347 6119 00 HOSE CLAMP 4
280 1613 7912 01 INDICATOR 1
295 0661 1014 00 SEALING WASHER 1
300 1612 2152 00 NIPPLE 1
305 0653 1046 00 FLAT GASKET 1

1611 7410 28/05 49

 STANDARD
BODYWORK AND MOUNTS

1611 7440 28_12

50 1611 7440 28/12

 STANDARD
BODYWORK AND MOUNTS

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0420 07 PANEL 1

35 1615 5664 00 HEX. HEAD SCREW 8
40 1604 0422 05 FRONT PANEL 1
45 1604 0848 00 PLATE 1
50 1604 0849 00 PLATE 1
55 1615 5664 00 HEX. HEAD SCREW 2
60 1615 5664 00 HEX. HEAD SCREW 8
65 1604 0434 01 ROOF DUCT 1
70 1615 5664 00 HEX. HEAD SCREW 7
75 0266 2110 00 HEXAGON NUT 1
80 0301 2335 00 PLAIN WASHER 1
95 1615 7712 00 HINGE 4
100 0216 1324 03 HEX SOCK. SCREW 8
110 1604 0423 02 DOOR (LH & RH) 2
115 0216 1324 03 HEX SOCK. SCREW 8
125 1604 0435 00 GASSPRING 2
130 0147 1328 03 HEX. HEAD SCREW 2
135 0324 1000 16 DISTANCE SLEEVE 4
140 0147 1331 03 HEX. HEAD SCREW 2
145 0291 1110 00 LOCKNUT 2
160 1619 2665 00 SEAL AR
165 1604 4318 00 SEAL AR
240 1604 0429 01 COVER 1
245 0129 3174 01 BLIND RIVET 3
250 0301 2318 00 PLAIN WASHER 3
260 1615 5692 00 LOCK 1
265 1612 1574 00 SPRING CLIP 1
270 0129 3115 00 BLIND RIVET 1
275 1089 9068 01 KEY 1
360 1202 8673 00 HANDGRIP 2
363 0147 1246 03 HEX. HEAD SCREW 4
365 0333 3220 00 LOCK WASHER 4
367 0266 2108 00 HEXAGON NUT 4
370 1615 8605 00 STIRRUP 4
380 0129 3174 01 BLIND RIVET 8
390 1619 2980 01 BASE PLATE 4
400 0129 3174 01 BLIND RIVET 12
410 1619 2978 01 CATCH 4
415 0147 1214 03 HEX. HEAD SCREW 4
420 0291 1107 00 LOCKNUT 4
440 1615 8604 00 BRACKET 2
445 0226 9915 17 SQ. NECK BOLT 2
450 0333 3227 00 LOCK WASHER 2
455 0266 2110 00 HEXAGON NUT 2
470 1604 2206 00 HOLDER (DOCUMENT) 1
475 0129 3174 01 BLIND RIVET 2

1611 7440 28/12 51

 STANDARD
ELECTRICAL SYSTEM

1611 7490 28_09

52 1611 7490 28/09

 STANDARD
ELECTRICAL SYSTEM

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

25 1202 9011 00 CLAMP 1

30 1619 2766 00 BOLT 2
50 1604 0469 00 BATTERY CABLE 1
55 2250 2382 46 BATTERY CABLE 1
60 1604 0475 07 WIRE HARNESS 1
65 0147 1398 03 HEX. HEAD SCREW 1
70 1088 0019 03 CONTACT WASHER 1
74 1088 0801 40 GROMMET 1
76 1088 0830 10 CABLE CLAMP 4
81 1088 1301 01 CABLE STRIP 5
85 0147 1397 03 HEX. HEAD SCREW 1
90 1088 0019 03 CONTACT WASHER 1
95 1619 3729 00 PROTECT.CAP 1
150 1615 9849 00 SUPPORT 1
155 0147 1320 03 HEX. HEAD SCREW 1
160 0333 3227 00 LOCK WASHER 1
165 1089 0585 01 RELAY 1
170 0147 1243 03 HEX. HEAD SCREW 2
175 0333 3220 00 LOCK WASHER 2
190 1089 9206 31 CIRCUIT BREAKER 1
195 1089 9206 59 PROTECTION CAP 1
250 1604 0296 00 WIRE HARNESS 1

1611 7490 28/09 53

 STANDARD
MARKINGS

1611 7520 28_11

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 - DATA PLATE 1
(Not available separately)
25 0129 3270 34 BLIND RIVET 4
30 0690 1150 00 HOUSE MARK 2
35 1079 9905 51 INSTRUCTION LABEL 1
40 1079 9910 02 INFORMATION LABEL 1
45 1079 9902 29 WARNING LABEL 1
50 1079 9908 34 INSTRUCTION LABEL 1
60 1079 9924 42 INFORMATION LABEL 1
70 1604 5797 01 WARRANTY LABEL 2
75 1079 9921 03 INFORMATION LABEL 1
105 1079 9922 07 INFORMATION LABEL 1

54 1611 7520 28/11

 STANDARD
GEARSET
I=2.429

1611 8138 28_01

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

10 1604 7386 81 GEARSET I=2.429 1

•Α10 1604 0330 00 GEAR WHEEL 1
•Α20 1604 7386 00 DRIVE 1

1611 8138 28/01 55

 STANDARD
SET OILFILTER

1611 8282 40_01

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1202 8040 02 OILFILTER 1

30 2254 7257 00 NIPPLE 1
100 WITH UNIT SERV PAK50H XAHS186 1
(Not available separately)

56 1611 8282 40/01

 STANDARD
VALVES ON VESSEL
FOR ASME

30

40

80

35
20

85

See Page 46

25

1611 8343 27_11

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0382 91 OIL SEPARATOR 1

(For details see page 72)
25 1310 1365 00 PIPE COUPLING 3
30 1079 9902 47 WARNING LABEL 1
35 1613 3385 00 DECAL 1
40 1613 3384 00 DECAL 2
80 0832 1001 19 SAFETY VALVE 1
85 1604 4846 00 PIPE 1

1611 8343 27/11 57

 STANDARD
VALVES ON VESSEL
FOR EC

80

85

See Page 46

25

1611 8344 27_01

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

25 9000 0302 00 PIPE COUPL. 3

80 0832 1000 53 SAFETY VALVE 1
85 1604 4846 00 PIPE 1

58 1611 8344 27/01

 STANDARD
AIR OUTLET PIPE
FOR COMPRESSOR WITHOUT LUBRICATOR

1611 8370 27_01

20

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0405 00 PIPE 1

1611 8370 27/01 59

 STANDARD
VESSEL AIR OUTLET PIPE
FOR COMPRESSOR WITHOUT AFTERCOOLER & COLD WEATHER EQUIPMENT

1611 8371 27_01

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0403 00 PIPE 1

60 1611 8371 27/01

 STANDARD
SILENCING SET

1611 8431 28_03

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0425 03 BAFFLE 2 200 - SILENCING FOAM (50 mm) 1

50 1619 5337 03 BOLT 8 205 - SILENCING FOAM (50 mm) 1
70 1604 0427 02 PLATE 10 210 - SILENCING FOAM (50 mm) 1
71 1604 0286 00 BAFFLE 2 215 - SILENCING FOAM (50 mm) 1
75 - SILENCING FOAM (30 mm) 10 220 - SILENCING FOAM (50 mm) 1
76 - SILENCING FOAM (30 mm) 2 225 - SILENCING FOAM (50 mm) 1
80 1604 0426 02 PLATE 2 230 - SILENCING FOAM (50 mm) 1
85 1604 0428 02 PLATE 2 235 - SILENCING FOAM (50 mm) 1
90 0129 3174 01 BLIND RIVET 48 240 - SILENCING FOAM (50 mm) 1
95 1615 5664 00 SCRAPER BOLT 12 245 - SILENCING FOAM (50 mm) 1
100 - SILENCING FOAM (50 mm) 1 250 - SILENCING FOAM (50 mm) 2
105 - SILENCING FOAM (50 mm) 1
110 1604 0929 00 BAFFLE 1
115 1615 5664 00 SCRAPER BOLT 4
120 - SILENCING FOAM (50 mm) 2 - 1079 0003 32 SILENCING FOAM
125 - SILENCING FOAM (50 mm) 1 2000 mm x 1500 mm x 30 mm
140 - SILENCING FOAM (50 mm) 2 - 1079 0003 33 SILENCING FOAM
145 - SILENCING FOAM (50 mm) 2 2000 mm x 1500 mm x 50 mm
150 - SILENCING FOAM (50 mm) 1
155 - SILENCING FOAM (50 mm) 1

1611 8431 28/03 61

 STANDARD
OIL SEPARATOR AND PIPES
FOR COMPRESSOR WITHOUT COLD WEATHER EQUIPMENT
FOR EC

See Page 56

1611 8494 28_02

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 0975 8300 17 BATTERY 1

40 1604 0382 90 OIL SEPARATOR 1
(For details see page 67)
50 1604 0374 02 BRACKET 1
60 1613 6828 00 FILTER HEAD 1
70 1604 7944 01 PIPE 1

62 1611 8494 28/02

 STANDARD
PIPES AND FITINGS
FOR COMPRESSOR WITHOUT COLD WEATHER EQUIPMENT
FOR ASME

See Page 56

1611 8495 28_02

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 0975 8300 17 BATTERY 1

40 1613 6828 00 FILTER HEAD 1
50 1604 7944 01 PIPE 1
60 1604 0374 02 BRACKET 1

1611 8495 28/02 63

 STANDARD
MARKINGS

1611 8528 28_05

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0923 01 DECAL (XAHS186) 2

30 1604 3317 04 LABEL NOISE 99LWA 1
40 1079 9903 84 WARNING LABEL 1

64 1611 8528 28/05

 STANDARD
FRAME

1604 0250 81_01

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 1604 0250 81 FRAME (From page 32)

•20 1604 0250 14 FRAME 1
•30 1604 7001 01 PROTECT COVER 1
•40 0291 1110 00 LOCKNUT 2

1604 0250 81/01 65

 STANDARD
FUELTANK ASSEMBLY

1604 0261 85_02

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 1604 0261 85 FUELTANK ASSEMBLY (From page 34)

•20 1604 0261 04 FUELTANK 1
•25 1615 5577 00 PLUG 1
•30 1615 7653 02 CAP 1
•35 1615 7654 00 STRAINER 1
•40 1604 0266 00 REDUCTION 1
•45 1615 6479 00 ADAPTOR 1
•50 1615 6480 00 GROMMET 2
•55 0070 6002 17 PLASTIC TUBE AR
•60 0070 6002 17 PLASTIC TUBE AR

66 1604 0261 85/02

 STANDARD
OIL SEPARATOR
FOR EC

20

25

40

45
65

30

35

50

45
55

60
1604 0382 90_00

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 1604 0382 90 OIL SEPARATOR (From page 62)

•20 1604 0847 84 REGUL VALVE ASSY 1
(For details see page 77)
•25 0661 1049 00 SEALING WASHER 1
•30 0623 2106 03 BACKNUT 1
•35 - SEAL 1
(Part of service kit, see page 26)
•40 1604 0385 01 TUBE 1
•45 1604 0351 90 PRESSURE VESSEL 1
(For details see page 75)
•50 - OIL.SEP.ELEMENT 1
(Part of service kit, see page 26)
•55 - SEAL (OIL SEPARATOR) 1
(Part of service kit, see page 26)
•60 1604 0384 02 RETAINER 1
•65 1616 5108 00 LEVEL GAUGE 1

1604 0382 90/00 67

 STANDARD
UNLOADING VALVE ASSEMBLY

1604 0306 83_00

68 1604 0306 83/00

 STANDARD
UNLOADING VALVE ASSEMBLY

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 1604 0306 83 UNLOADING VALVE (From page 40)

•20 - VALVE (UNL. VALVE) 1
(Part of service kit, see page 25)
•25 - SPRING 1
(Part of service kit, see page 25)
•30 1604 0307 00 PISTON ROD (UNL.VALVE) 1
•35 - PLAIN BEARING 1
(Not available separately)
•40 - WIPER 1
(Not available separately)
•45 1604 0310 00 PISTON (UNLOADING VALVE) 1
•50 - PISTON SEAL 1
(Part of service kit, see page 25)
•55 - HOUSING (UNLOADER) 1
(Not available separately)
•60 - LOCKNUT 1
(Part of service kit, see page 25)
•65 1604 0311 00 SPRING 1
•70 0147 1962 76 HEXAGON HEAD SCREW 3
•75 - HOUSING 1
(Not available separately)
•80 - O-RING 1
(Part of service kit, see page 25)
•85 0147 1252 03 HEXAGON HEAD SCREW 2
•90 - HOUSING 1
(Not available separately)
•95 - O-RING 1
(Part of service kit, see page 25)
•100 - O-RING 1
(Part of service kit, see page 25)
•105 - VALVE 1
(Part of service kit, see page 25)
•110 - O-RING 1
(Part of service kit, see page 25)
•115 - O-RING 1
(Part of service kit, see page 25)
•120 1615 8345 01 BUSHING 1
•125 - PLAIN WASHER 1
(Part of service kit, see page 25)
•130 - O-RING 1
(Part of service kit, see page 25)
•135 - O-RING 1
(Part of service kit, see page 25)
•140 1604 0313 00 VALVE 1
•145 0581 1200 23 STRAIGHT PIPE COUPLING 1
•150 0070 6002 04 PLASTIC TUBE AR
•155 0582 1200 05 CUTTING RING COUPLING IN BRASS 1
•160 0653 1043 00 FLAT GASKET 2
•165 0686 4201 03 HEXAGON PLUG 1
•170 0582 1200 12 CUTTING RING COUPLING IN BRASS 1
•175 0070 6002 05 PLASTIC TUBE AR

1604 0306 83/00 69

 STANDARD
ENGINE SPEED REGULATOR

1604 0321 80_03

70 1604 0321 80/03

 STANDARD
ENGINE SPEED REGULATOR

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 1604 0321 80 ACTUATING UNIT ASSY (From page 40)

•30 - WIPER 1
(Part of service kit, see page 24)
•35 - PLAIN BEARING 1
(Not available separately)
•40 2252 0489 00 COMPR.SPRING 1
•45 - HOUSING (ACTUATING UNIT) 1
(Not available separately)
•50 1615 8755 00 PISTON 1
•55 - PISTON SEAL 1
(Part of service kit, see page 24)
•60 0291 1110 00 LOCKNUT 2
•65 1615 8369 00 SPRING 1
•70 0266 2108 00 HEXAGON NUT 2
•75 0147 1252 12 HEX .HEAD SCREW 2
•80 - COVER 1
(Not available separately)
•85 0501 0007 00 SPHERICAL PLAIN BEARING 1
•90 1615 8382 00 ADAPTOR 1
•100 1615 8756 80 PISTON 1
•A10 1615 8756 01 PISTON ROD 1
•A20 1615 9770 00 EYE BOLT WITH BEARING 1

1604 0321 80/03 71

 STANDARD
OIL SEPARATOR
FOR ASME

20

25

40

45
65

30

35

50

45
55

60 1604 0382 91_00

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 1604 0382 91 OIL SEPARATOR (From page 57, 106)

•20 1604 0847 84 REGUL VALVE ASSY 1
(For details see page 77)
•25 0661 1049 00 SEALING WASHER 1
•30 0623 2106 03 BACKNUT 1
•35 - SEAL 1
(Part of service kit, see page 26)
•40 1604 0385 01 TUBE 1
•45 1604 0352 82 PRESSURE VESSEL 1
(For details see page 76)
•50 - OIL.SEP.ELEMENT 1
(Part of service kit, see page 26)
•55 - SEAL (OIL SEPARATOR) 1
(Part of service kit, see page 26)
•60 1604 0384 02 RETAINER 1
•65 1616 5108 00 LEVEL GAUGE 1

72 1604 0382 91/00

 STANDARD
INSTRUMENT PANEL ASSEMBLY

1604 0471 85_00

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 1604 0471 85 INSTRUMENT PANEL ASSEMBLY

(From page 47)
•20 1604 0471 01 PANEL 1
•25 1604 0476 00 LABEL 1
•30 1604 0472 02 WINDOW 1
•40 1089 9355 97 MODULE 1
•50 1604 0315 81 LOAD VALVE ASS'Y 1
(For details see page 74)
•52 0581 1200 23 ELBOW PIPE COUPLING 2
•60 1089 9420 01 HOURMETER 1
•65 0160 6040 00 SLOTTED SCREW 2
•70 0266 2106 00 HEXAGON NUT 2
•75 1615 7264 00 PRESSURE GAUGE 1
•80 1604 0473 02 PLATE 1
•85 0581 1200 30 ELBOW PIPE COUPLING 1
•110 0584 0080 09 STRAIGHT PIPE COUPLING 1

1604 0471 85/00 73

 STANDARD
LOAD VALVE ASSEMBLY

35

30

25

65

40
45

50
25 40
25
55

60

20

1604 0315 81_01

70

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 1604 0315 81 LOAD VALVE ASS’Y (From page 73)

•20 0160 6060 00 SLOTTED SCREW 2
•25 - O-RING 3
(Part of service kit, see page 28)
•30 1604 0319 00 SPRING 1
•35 1604 0316 01 HOUSING 1
•40 0335 3106 00 RETAINING RING 2
•45 - O-RING 1
(Part of service kit, see page 28)
•50 1604 0317 00 VALVE 1
•55 - O-RING 1
(Part of service kit, see page 28)
•60 1613 2614 00 COVER 1
•65 1604 0318 00 VALVE ROD 1
•70 1613 2616 00 KNOB 1

74 1604 0315 81/01

 STANDARD
PRESSURE VESSEL
FOR EC

35

40

45

20

50

25
30

1604 0351 90_00

55

60

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 1604 0351 90 PRESSURE VESSEL (From page 67)

•20 0129 3115 00 BLIND RIVET 4
•25 2250 2528 00 PLUG SCREW 1
•30 0653 1227 00 FLAT GASKET 1
•35 0147 1403 20 HEX. HEAD SCREW 12
•40 1604 0386 00 COVER 1
•45 - O-RING 1
(Part of service kit, see page 26)
•50 1604 0351 00 VESSEL 1
•55 0661 1033 00 SEALING WASHER 1
•60 0686 3716 02 HEXAGON PLUG 1

1604 0351 90/00 75

 STANDARD
PRESSURE VESSEL
FOR ASME

35

40

45

20

50

25
30

1604 0352 82_00

55

60

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 1604 0352 82 PRESSURE VESSEL (From page 72)

•20 0129 3115 00 BLIND RIVET 4
•25 2250 2528 00 PLUG SCREW 1
•30 0653 1227 00 FLAT GASKET 1
•35 0147 1403 20 HEX. HEAD SCREW 12
•40 1604 0386 00 COVER 1
•45 - O-RING 1
(Part of service kit, see page 26)
•50 1604 0352 00 VESSEL 1
•55 0661 1033 00 SEALING WASHER 1
•60 0686 3716 02 HEXAGON PLUG 1

76 1604 0352 82/00

 STANDARD
REGULATING VALVE ASSEMBLY

1604 0847 84_02

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 1604 0847 84 REGUL VALVE ASSY (From page 67, 72) •160 1604 0850 03 HANDLE 1
•20 - HOUSING 1 •170 2252 4057 00 BALL CAGE 1
(Not available separately)
•30 - SPRING 1
(Part of service kit, see page 27)
•40 - BEARING BALL 1
(Part of service kit, see page 27)
•50 - MEMBRANE 1
(Part of service kit, see page 27)
•60 - O-RING 1
(Part of service kit, see page 27)
•70 - O-RING 1
(Part of service kit, see page 27)
•80 2252 4058 00 SPRING GUIDE 1
•90 2252 1428 00 SPRING 1
•100 2252 4059 01 SPRING SEAT 1
•110 - O-RING 1
(Part of service kit, see page 27)
•120 - SPRING COVER 1
(Not available separately)
•130 0266 2110 00 HEXAGON NUT 1
•140 1604 0849 02 SCREW 1
•150 0147 1247 03 HEX. HEAD SCREW 4

1604 0847 84/02 77

 OPTIONS
TOWING EYES
AC EYE, BALL COUPLING-WITH BRAKES, DIN EYE

REF PART NUMBER DESIGNATION QTY

AC EYE
20 1614 4368 00 A.C. EYE 1
25 1202 9844 02 BOLT 2
30 1202 9845 00 WASHER 4
35 0291 1185 13 LOCKNUT 2

1611 7701 12_00

1611 7701 12/00

BALL COUPLING - WITH BRAKES REF PART NUMBER DESIGNATION QTY

25 20 1619 7273 00 BALL COUPLING 1

25 1202 9844 05 BOLT 1
30 1202 9844 02 BOLT 1
40 1619 7213 00 SUPPORT 1
30
20 50 1202 9732 00 BUSH 1
145 0291 1185 13 LOCKNUT 2
50

145

40

1611 7701 39/00

DIN EYE REF PART NUMBER DESIGNATION QTY

20 1614 4392 00 DIN EYE 1

25 1202 9844 02 BOLT 2
30 1202 9845 00 WASHER 4
35 0291 1185 13 LOCKNUT 2

1611 7702 12/00

78
 OPTIONS
TOWING EYES
BALL COUPLING, ITA EYE, NATO EYE

REF PART NUMBER DESIGNATION QTY

BALL COUPLING - BRAKES LOOSE
20 1619 7273 80 BALL COUPLING 1
•B20 1619 7273 00 BALL COUPLING 1
•B25 0147 1412 03 HEXAGON HEAD SCREW 1
•B30 0147 1411 03 HEXAGON HEAD SCREW 1
•B35 1202 9732 00 BUSH 2
•B45 0291 1112 00 LOCKNUT 2

1611 7703 84_00

1611 7703 84/00

ITA EYE - WITH BRAKES REF PART NUMBER DESIGNATION QTY

35 1615 6820 02 TOWING EYE 1

40 1202 9844 02 BOLT 2
45 1202 9845 00 WASHER 4
50 0291 1185 13 LOCKNUT 2

1611 7704 12_04

1611 7704 12/04

NATO EYE REF PART NUMBER DESIGNATION QTY

20 1614 4678 00 NATO EYE 1

25 1202 9844 02 BOLT 2
30 1202 9845 00 WASHER 4
35 0291 1185 13 LOCKNUT 2

1611 7707 12_00

1611 7707 12/00

79
 OPTIONS
TOWBAR ACCESSORIES
SUPPORT LEG, JOCKEY WHEEL, SAFETY CHAIN CE

REF PART NUMBER DESIGNATION QTY

SUPPORT LEG-WITH BRAKES
20 1615 7752 01 FOOT 1
25 1615 7751 00 CLAMP ASSY 1
30 0147 1363 03 HEX. HEAD SCREW 4
20 35 0333 3232 00 LOCK WASHER 4

30
35

25

1611 7720 27/02

JOCKEY WHEEL REF PART NUMBER DESIGNATION QTY

20 1615 7769 00 SWIVEL WHEEL 1

25 0147 1362 03 HEXAGON HEAD SCREW 4
30 0333 3232 00 SERRATED LOCKWASHER 4

20

25
30

35

1611 7721 27_00

1611 7721 27/00

SAFETY CHAIN CE REF PART NUMBER DESIGNATION QTY

20 1604 1575 80 CHAIN ASSY 1

20

1611 7722 27_02

1611 7722 27/02

80
 OPTIONS
METAL FILLERNECK
FOR FUEL TANK

1611 8020 14_01

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 4494 00 CONNECTION NUT FUELTANK 1

1611 8020 14/01 81

 OPTIONS
TOWBAR AND AXLE
FOR COMPRESSOR WITH ADJUSTABLE TOWBAR AND BRAKES

1611 7762 27_05

82 1611 7762 27/05

 OPTIONS
TOWBAR AND AXLE
FOR COMPRESSOR WITH ADJUSTABLE TOWBAR AND BRAKES

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1079 9902 00 WARNING LABEL 1

25 1604 0445 00 TOWBAR 1
(For details see page 111)
30 0147 1489 15 HEX. HEAD SCREW 2
35 0301 2378 00 PLAIN WASHER 2
40 0147 1401 03 HEX. HEAD SCREW 4
42 0301 2358 00 PLAIN WASHER 4
45 0291 1112 00 LOCKNUT 4
50 1604 1479 00 AXLE 1
(For details see page 113)
55 0147 1401 15 HEX. HEAD SCREW 4
60 0301 2358 00 PLAIN WASHER 4
65 0147 1401 15 HEX. HEAD SCREW 4
70 0301 2358 00 PLAIN WASHER 4
75 1604 1515 00 BRAKE CABLE 1
80 1604 1518 00 BRAKE CABLE 1
85 0266 2110 00 HEXAGON NUT 4
100 1604 0451 01 MUDGUARD 2
110 1619 2766 00 HEX. HEAD SCREW 10
115 0300 8019 00 PLAIN WASHER 10
155 1604 1471 01 TYRE ASSY 205/75 R14C 109/107R 2
•A10 0380 0000 10 TYRE 1
•A20 1604 0340 00 DISC WHEEL 1
•A30 1615 6322 00 VENTIL 1

1611 7762 27/05 83

 OPTIONS
SPARK ARRESTOR

1611 8070 27_01

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0568 00 SPARK ARRESTOR 1

30 1615 5664 00 SCRAPER BOLT 2
40 0346 3001 05 PIPE CLAMP 1
50 0147 1362 03 HEX. HEAD SCREW 1
60 0266 2111 00 HEXAGON NUT 1

84 1611 8070 27/01

 OPTIONS
INLET SHUT DOWN VALVE

1611 8075 28_03

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0417 81 SWITCH OVERSPEED ASSY 1 134 0661 1014 00 SEALING WASHER 1
(For details see page 110) 135 0560 4400 85 CROSS PIPE COUPLING 1
30 0147 1360 03 HEX. HEAD SCREW 4 140 0147 1323 03 HEX. HEAD SCREW 2
35 0333 3232 00 LOCK WASHER 4 145 0333 3227 00 LOCK WASHER 2
50 1604 0419 01 PIPE 1 150 0301 2335 00 PLAIN WASHER 2
52 1615 7980 00 HOSE 1 155 0266 2110 00 HEXAGON NUT 2
53 0347 6100 21 HOSE CLAMP 2 160 1604 0431 00 WINDOW 1
55 1616 2526 00 HOSE 1
56 0347 6131 00 HOSE CLAMP 2
65 1604 0579 00 PIPE 1
70 1616 2526 00 HOSE 1
71 0347 6131 00 HOSE CLAMP 2
72 1604 0573 00 HOSE 1
80 1604 0566 00 WIRE HARNESS 1
100 0581 1200 16 ELBOW PIPE COUPLING 1
105 0070 6002 04 PLASTIC TUBE AR
110 0581 1200 16 ELBOW PIPE COUPLING 1
120 0581 1200 16 ELBOW PIPE COUPLING 1
125 0070 6002 04 PLASTIC TUBE AR
130 0582 1200 05 STRAIGHT PIPE COUPLING 1

1611 8075 28/03 85

 OPTIONS
PIPE
FOR COMPRESSOR WITHOUT AFTERCOOLER BY-PASS

See Page 94

1611 8373 27_00

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0525 03 PIPE 1

86 1611 8373 27/00

 OPTIONS
ROAD LIGHT SYSTEM

1611 8640 27_05

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0570 81 PANEL ASSY 1 180 1088 0830 09 CABLE CLAMP 4

(For details see page 112) 190 0698 0150 00 GROMMET 2
25 1619 2766 00 BOLT 4 195 1088 0801 40 GROMMET 1
50 1089 0291 02 APPLIANCE INLET 1 210 1202 7695 01 BRACKET 2
55 0160 6066 00 SLOTTED SCREW 3 215 0147 1401 03 HEX. HEAD SCREW 4
60 0333 3215 00 LOCK WASHER 3 220 0301 2358 00 PLAIN WASHER 4
65 0266 2107 00 HEXAGON NUT 3 225 0291 1112 00 LOCKNUT 4
80 1616 0864 00 CABLE 1
90 1604 0575 00 WIRE HARNESS 1
100 1604 0571 00 PROTECTION 2
105 1619 2766 00 BOLT 8
120 1615 5520 00 REFLECTOR 4
125 0129 3174 01 BLIND RIVET 2
140 1604 0578 00 FRONT MARKER 2
145 0226 3343 17 TAPPING SCREW 4
150 1613 0801 00 CLAMP 2
155 0147 1247 03 HEX. HEAD SCREW 2
160 0333 3220 00 LOCK WASHER 2
161 0301 2321 00 PLAIN WASHER 2
165 0266 2108 00 HEXAGON NUT 2

1611 8640 27/05 87

 OPTIONS
ROAD LIGHT SYSTEM
FRANCE

235
155 230
150
161
160
165

180
55
60
65
90 50
190 145
140

110

120

95
215

20 195

25

215 120

80

240 210

210 220

225
220
1611 8641 27_01
225 245

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 4748 01 BUMPER BAR 1 195 1088 0801 40 GROMMET 2

25 1619 2766 00 BOLT 4 210 1202 7695 01 BRACKET 2
50 1089 0291 02 APPLIANCE INLET 1 215 0147 1401 03 HEX. HEAD SCREW 4
55 0160 6066 00 SLOTTED SCREW 3 220 0301 2358 00 PLAIN WASHER 4
60 0333 3215 00 LOCK WASHER 3 225 0291 1112 00 LOCKNUT 4
65 0266 2107 00 HEXAGON NUT 3 230 0266 2108 00 HEXAGON NUT 4
80 1616 0864 00 CABLE 1 235 0301 2321 00 PLAIN WASHER 4
90 1604 0575 00 WIRE HARNESS 1 240 1604 1742 01 LIGHT LH 1
95 1604 0571 00 PROTECTION 4 245 1604 0577 01 LIGHT RH 1
110 1619 2766 00 BOLT 16
120 1615 5520 00 REFLECTOR 4
140 1604 0578 00 FRONT MARKER 2
145 0226 3343 17 TAPPING SCREW 4
150 1613 0801 00 CLAMP 2
155 0147 1247 03 HEX. HEAD SCREW 2
160 0333 3220 00 LOCK WASHER 2
161 0301 2321 00 PLAIN WASHER 2
165 0266 2108 00 HEXAGON NUT 2
180 1088 0830 09 CABLE CLAMP 4
190 0698 0150 00 GROMMET 2

88 1611 8641 27/01

 OPTIONS
ADAPTER
FOR ROAD LIGHT SYSTEM

1611 8645 14_01

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 5313 00 ADAPTER 24V RS 1

1611 8645 14/01 89

 OPTIONS
SUPPORT
FOR SUPPORT MOUNTED COMPRESSOR

80
25

80
95
90
85
35

1611 8650 27_05

95 90
85
30

70

65
60

55 50
70

60 65

55

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

25 1604 0555 00 SUPPORT 1

30 0147 1489 15 HEX. HEAD SCREW 1
35 0301 2378 00 PLAIN WASHER 2
50 1604 0556 05 SUPPORT 1
55 0147 1958 96 HEX. HEAD SCREW 4
60 0301 2378 00 PLAIN WASHER 4
65 0147 1401 15 HEX. HEAD SCREW 4
70 0301 2358 00 PLAIN WASHER 4
80 1604 1433 00 SUPPORT 2
85 0147 1400 03 HEX. HEAD SCREW 4
90 0333 3237 00 LOCK WASHER 4
95 0266 2112 00 HEXAGON NUT 4

90 1611 8650 27/05

 OPTIONS
PIPES AND VALVE
FOR PARTIAL AFTERCOOLER BY-PASS

1611 8674 27_01

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 3692 00 PIPE 1

30 1604 3520 00 PIPE 1
60 1619 6153 06 BALL VALVE 1
70 1604 3521 00 HOSE ASSY 1
80 2250 4983 00 NIPPLE 2

1611 8674 27/01 91

 OPTIONS
SKID
FOR SKID MOUNTED COMPRESSOR

1611 8651 27_00

92 1611 8651 27/00

 OPTIONS
SKID
FOR SKID MOUNTED COMPRESSOR

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 8201 01 SKID SIZE 1 1

25 0147 1489 15 HEX. HEAD SCREW 2
30 0147 1958 96 HEX. HEAD SCREW 4
35 0301 2378 00 PLAIN WASHER 6
40 0147 1401 15 HEX. HEAD SCREW 4
45 0301 2358 00 PLAIN WASHER 4

1611 8651 27/00 93

 OPTIONS
AFTERCOOLER
WITH WATERSEPERATOR

See Page 86

See Page 100

1611 8670 27_09

94 1611 8670 27/09

 OPTIONS
AFTERCOOLER
WITH WATERSEPERATOR

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0520 01 CONNECTION 1

30 1604 0526 00 BRACKET 2
35 1604 0527 00 BRACKET 2
40 0147 1320 03 HEX. HEAD SCREW 8
45 0333 3227 00 LOCK WASHER 8
50 1604 0528 01 AFTERCOOLER 1
55 0147 1323 03 HEX. HEAD SCREW 4
60 0301 2335 00 PLAIN WASHER 8
65 0291 1110 00 LOCKNUT 4
68 0653 1062 00 FLAT GASKET 1
70 0803 5012 11 SILENCER 1
72 1615 8619 01 COUPLING 1
74 1615 8620 00 RESTRICTOR 1
76 0070 6002 05 PLASTIC TUBE AR
85 0571 0035 41 HEXAGON NIPPLE 2
90 0661 1062 00 SEALING WASHER 2
95 1604 0529 02 PIPE AFTERCOOLER 1
100 0571 0035 41 HEXAGON NIPPLE 2
105 0661 1062 00 SEALING WASHER 2
110 1604 0533 00 BRACKET 2
120 1604 0530 01 WSD-FILTER 1
123 0653 1062 00 FLAT GASKET 1
125 0803 5012 11 SILENCER 1
130 1615 8619 01 COUPLING 1
132 1615 8620 00 RESTRICTOR 1
134 0070 6002 05 PLASTIC TUBE AR
160 0147 1360 03 HEX. HEAD SCREW 4
165 0333 3232 00 LOCK WASHER 4
170 0301 2344 00 PLAIN WASHER 4
175 0266 2111 00 HEXAGON NUT 4
180 1615 5664 00 HEX. HEAD SCREW 4
190 1604 0534 00 BRACKET 1
200 1615 5664 00 HEX. HEAD SCREW 2
205 1615 5664 00 HEX. HEAD SCREW 2
215 1604 0536 00 PIPE 1
230 0571 0035 41 HEXAGON NIPPLE 1
235 0661 1062 00 SEALING WASHER 1
250 0686 3716 07 HEXAGON PLUG 2
255 0661 1049 00 SEALING WASHER 2

1611 8670 27/09 95

 OPTIONS
AFTERCOOLER
WITH WATERSEPERATOR AND PD FILTER

See Page 86

See Page 100

1611 8671 27_10

96 1611 8671 27/10

 OPTIONS
AFTERCOOLER
WITH WATERSEPERATOR AND PD FILTER

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0520 01 CONNECTION 1

30 1604 0526 00 BRACKET 2
35 1604 0527 00 BRACKET 2
40 0147 1320 03 HEX. HEAD SCREW 8
45 0333 3227 00 LOCK WASHER 8
50 1604 0528 01 AFTERCOOLER 1
55 0147 1323 03 HEX. HEAD SCREW 4
60 0301 2335 00 PLAIN WASHER 8
65 0291 1110 00 LOCKNUT 4
68 0653 1062 00 FLAT GASKET 1
70 0803 5012 11 SILENCER 1
72 1615 8619 01 COUPLING 1
74 1615 8620 00 RESTRICTOR 1
76 0070 6002 05 PLASTIC TUBE AR
85 0571 0035 41 HEXAGON NIPPLE 2
90 0661 1062 00 SEALING WASHER 2
95 1604 0529 02 PIPE AFTERCOOLER 1
100 0571 0035 41 HEXAGON NIPPLE 2
105 0661 1062 00 SEALING WASHER 2
110 1604 0533 00 BRACKET 2
120 1604 0530 01 WSD-FILTER 1
123 0653 1062 00 FLAT GASKET 1
125 0803 5012 11 SILENCER 1
130 1615 8619 01 COUPLING 1
132 1615 8620 00 RESTRICTOR 1
134 0070 6002 05 PLASTIC TUBE AR
140 1604 0535 01 PD-FILTER 1
145 8092 2102 70 SERIAL CONNECT SET 1
150 0653 1062 00 FLAT GASKET 1
151 0803 5012 11 SILENCER 1
152 1615 8619 01 COUPLING 1
153 1615 8620 00 RESTRICTOR 1
155 0070 6002 05 PLASTIC TUBE AR
160 0147 1360 03 HEX. HEAD SCREW 4
165 0333 3232 00 LOCK WASHER 4
170 0301 2344 00 PLAIN WASHER 4
175 0266 2111 00 HEXAGON NUT 4
180 1615 5664 00 HEX. HEAD SCREW 4
190 1604 0534 00 BRACKET 1
200 1615 5664 00 HEX. HEAD SCREW 2
205 1615 5664 00 HEX. HEAD SCREW 2
215 1604 0538 00 PIPE 1
230 0571 0035 41 HEXAGON NIPPLE 1
235 0661 1062 00 SEALING WASHER 1
250 0686 3716 07 HEXAGON PLUG 2
255 0661 1049 00 SEALING WASHER 2

1611 8671 27/10 97

 OPTIONS
AFTERCOOLER
WITH WATERSEPERATOR AND PD-QD FILTER

See Page 86

See Page 100

1611 8672 27_10

98 1611 8672 27/10

 OPTIONS
AFTERCOOLER
WITH WATERSEPERATOR AND PD-QD FILTER

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0520 01 CONNECTION 1

30 1604 0526 00 BRACKET 2
35 1604 0527 00 BRACKET 2
40 0147 1320 03 HEX. HEAD SCREW 8
45 0333 3227 00 LOCK WASHER 8
50 1604 0528 01 AFTERCOOLER 1
55 0147 1323 03 HEX. HEAD SCREW 4
60 0301 2335 00 PLAIN WASHER 8
65 0291 1110 00 LOCKNUT 4
68 0653 1062 00 FLAT GASKET 1
70 0803 5012 11 SILENCER 1
72 1615 8619 01 COUPLING 1
74 1615 8620 00 RESTRICTOR 1
76 0070 6002 05 PLASTIC TUBE AR
85 0571 0035 41 HEXAGON NIPPLE 2
90 0661 1062 00 SEALING WASHER 2
95 1604 0529 02 PIPE AFTERCOOLER 1
100 0571 0035 41 HEXAGON NIPPLE 2
105 0661 1062 00 SEALING WASHER 2
110 1604 0533 00 BRACKET 2
120 1604 0530 01 WSD-FILTER 1
123 0653 1062 00 FLAT GASKET 1
125 0803 5012 11 SILENCER 1
130 1615 8619 01 COUPLING 1
132 1615 8620 00 RESTRICTOR 1
134 0070 6002 05 PLASTIC TUBE AR
140 1604 0535 01 PD-FILTER 1
145 8092 2102 70 SERIAL CONNECT SET 1
150 1604 0532 01 QD-FILTER 1
155 8092 2102 70 SERIAL CONNECT SET 1
160 0147 1360 03 HEX. HEAD SCREW 4
165 0333 3232 00 LOCK WASHER 4
170 0301 2344 00 PLAIN WASHER 4
175 0266 2111 00 HEXAGON NUT 4
180 1615 5664 00 HEX. HEAD SCREW 4
181 0653 1062 00 FLAT GASKET 1
182 0803 5012 11 SILENCER 1
183 1615 8619 01 COUPLING 1
184 1615 8620 00 RESTRICTOR 1
185 0070 6002 05 PLASTIC TUBE AR
190 1604 0534 00 BRACKET 1
200 1615 5664 00 HEX. HEAD SCREW 2
205 1615 5664 00 HEX. HEAD SCREW 2
230 0571 0035 41 HEXAGON NIPPLE 2
235 0661 1062 00 SEALING WASHER 1
250 0686 3716 07 HEXAGON PLUG 2
255 0661 1049 00 SEALING WASHER 2

1611 8672 27/10 99

 OPTIONS
PIPE
FOR COMPRESSOR WITHOUT REHEATER

1611 8676 27_01

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0539 00 PIPE 1

100 1611 8676 27/01

 OPTIONS
BALL VALVE
FOR COMPRESSOR WITH FULL AFTERCOOLER BY-PASS

1611 8677 27_00

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 4750 00 PIPE 1

25 1604 0538 00 PIPE 1
30 1619 6153 08 BALL VALVE 1

1611 8677 27/00 101

 OPTIONS
REHEATER

1611 8675 27_07

102 1611 8675 27/07

 OPTIONS
REHEATER

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 0541 00 REHEATER 1

25 0300 8019 00 PLAIN WASHER 2
30 0147 1321 03 HEX. HEAD SCREW 2
32 0147 1322 03 HEX. HEAD SCREW 2
35 0333 3227 00 LOCK WASHER 4
50 1604 0540 00 PIPE 1
55 0571 0035 41 HEXAGON NIPPLE 1
60 0661 1062 00 SEALING WASHER 1
65 1604 0542 00 PIPE 1
70 0571 0035 41 HEXAGON NIPPLE 1
75 0661 1062 00 SEALING WASHER 1
90 0575 0365 38 HOSE ASSEMBLY 1
95 1619 5509 00 NIPPLE 2
100 0661 1033 00 SEALING WASHER 2
115 1616 4610 00 PIPE 1
120 1619 7842 00 JOINT NIPPLE 1

1611 8675 27/07 103

 OPTIONS
BALL VALVE
FOR COMPRESSOR WITH PD FILTER AND FULL AFTERCOOLER BY-PASS

1611 8678 27_00

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1619 6153 08 BALL VALVE 1

30 1604 5162 00 PIPE 1
40 0603 4108 03 HEXAGON NIPPLE 1

104 1611 8678 27/00

 OPTIONS
WHEEL CHOCKS

1611 8690 27_02

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

70 1202 9354 01 BRACKET 2

80 0147 1244 03 HEX. HEAD SCREW 8
81 0301 2321 00 PLAIN WASHER 8
82 0291 1108 00 LOCKNUT 8
90 1202 9353 01 WHEELCHOCKS 2
100 1079 9902 64 LABEL 1

1611 8690 27/02 105

 OPTIONS
OIL SEPARATOR AND PIPES
FOR COMPRESSOR WITH COLD WEATHER EQUIPMENT
FOR EC

See Page 56

See Page 60

1611 8770 28_21

106 1611 8770 28/21

 OPTIONS
OIL SEPARATOR AND PIPES
FOR COMPRESSOR WITH COLD WEATHER EQUIPMENT
FOR EC

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 1510 00 MOTOR ACCESSORY 1

30 1615 9849 00 SUPPORT 1
35 0300 8019 00 PLAIN WASHER 1
40 0147 1320 03 HEX. HEAD SCREW 1
45 0333 3227 00 LOCK WASHER 1
55 1089 0585 01 RELAY 1
65 1604 0598 00 WIRE HARNESS 1
90 1604 0597 04 SUPPORT BATT. 1
95 0147 1323 03 HEX. HEAD SCREW 2
100 0301 2335 00 PLAIN WASHER 2
110 0975 8300 16 BATTERY 1
115 1604 0589 00 CLAMP 1
120 1614 2246 03 STUD 2
125 0333 3227 00 LOCK WASHER 2
130 0266 2110 00 HEXAGON NUT 2
170 1079 9920 00 INFORMATION LABEL 1
175 1079 9920 45 INFORMATION LABEL 1
176 1079 9924 44 INFORMATION LABEL 1
200 1604 0301 04 BRACKET 1
205 1619 7595 00 THERMOST.VALVE 1
210 1613 6883 03 VALVE HOUSING 1
215 1614 6118 00 COVER 1
220 0663 2101 95 O-RING 1
225 0147 1246 03 HEX. HEAD SCREW 2
230 0147 1363 03 HEX. HEAD SCREW 2
235 0301 2321 00 PLAIN WASHER 2
240 0301 2344 00 PLAIN WASHER 2
245 0266 2111 00 HEXAGON NUT 2
260 0333 3132 00 LOCK WASHER 2
270 0661 1038 00 SEALING WASHER 1
300 1619 5509 00 NIPPLE 1
305 0574 8235 37 HOSE ASSEMBLY 1
310 0574 9841 22 HOSE ASSEMBLY 1
320 1604 0382 91 OIL SEPARATOR 1
(For details see page 72)
365 0661 1038 00 SEALING WASHER 2

1611 8770 28/21 107

 OPTIONS
PIPES AND FITINGS
FOR COMPRESSOR WITH COLD WEATHER EQUIPMENT
FOR ASME

See Page 56

See Page 60

1611 8771 28_14

108 1611 8771 28/14

 OPTIONS
PIPES AND FITINGS
FOR COMPRESSOR WITH COLD WEATHER EQUIPMENT
FOR ASME

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

20 1604 1510 00 MOTOR ACCESSORY 1

30 1615 9849 00 SUPPORT 1
35 0300 8019 00 PLAIN WASHER 1
40 0147 1320 03 HEX. HEAD SCREW 1
45 0333 3227 00 LOCK WASHER 1
55 1089 0585 01 RELAY 1
65 1604 0598 00 WIRE HARNESS 1
90 1604 0597 04 SUPPORT BATT. 1
95 0147 1323 03 HEX. HEAD SCREW 2
100 0301 2335 00 PLAIN WASHER 2
110 0975 8300 16 BATTERY 1
115 1604 0589 00 CLAMP 1
120 1614 2246 03 STUD 2
125 0333 3227 00 LOCK WASHER 2
130 0266 2110 00 HEXAGON NUT 2
170 1079 9920 00 INFORMATION LABEL 1
175 1079 9920 45 INFORMATION LABEL 1
176 1079 9924 44 INFORMATION LABEL 1
200 1604 0301 04 BRACKET 1
205 1619 7595 00 THERMOST.VALVE 1
210 1613 6883 03 VALVE HOUSING 1
215 1614 6118 00 COVER 1
220 0663 2101 95 O-RING 1
225 0147 1246 03 HEX. HEAD SCREW 2
230 0147 1363 03 HEX. HEAD SCREW 2
235 0301 2321 00 PLAIN WASHER 2
240 0301 2344 00 PLAIN WASHER 2
245 0266 2111 00 HEXAGON NUT 2
260 0333 3132 00 LOCK WASHER 2
270 0661 1038 00 SEALING WASHER 1
300 1619 5509 00 NIPPLE 1
305 0574 8235 37 HOSE ASSEMBLY 1
310 0574 9841 22 HOSE ASSEMBLY 1
365 0661 1038 00 SEALING WASHER 2

1611 8771 28/14 109

 OPTION
INLET SHUT DOWN VALVE

190

180

170
195
140 200

170

180
75
70
20 60
80
65

56
130

90
85

50
54
52
155
1604 0417 81_01
150

145

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 1604 0417 81 SWITCH OVERSPEED ASSY(From page 85)

•20 1604 0417 00 BRACKET 1
•50 1615 9478 00 SPEED SWITCH 1
•52 0147 1247 03 HEX. HEAD SCREW 4
•54 0333 3220 00 LOCK WASHER 4
•56 0266 2108 00 HEXAGON NUT 4
•60 1089 0341 01 RELAY 1
•65 0160 6060 00 SLOTTED SCREW 1
•70 0333 3215 00 LOCK WASHER 1
•75 0266 2107 00 HEXAGON NUT 1
•80 1089 0621 52 SOLENOID VALVE 1
•85 0147 1171 03 HEX. HEAD SCREW 2
•90 0333 3214 00 LOCK WASHER 2
•130 1089 9326 01 PUSH BUTTON 1
•140 1604 0563 00 SHUTDOWN VALVE 1
•145 0147 1323 03 HEX. HEAD SCREW 2
•150 0333 3227 00 LOCK WASHER 2
•155 1604 0418 00 SUPPORT 1
•170 1604 0564 00 GASKET 2
•180 1604 0561 01 FLANGE 2
•190 0147 1331 03 HEX. HEAD SCREW 3
•195 0301 2335 00 PLAIN WASHER 3
•200 0291 1110 00 LOCKNUT 3

110 1604 0417 81/01

 OPTIONS
TOWBAR
(ADJUSTABLE - WITH BRAKES)

1604 0445 00_00

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 1604 0445 00 TOWBAR (ADJUSTABLE WITH BRAKES) •130 2914 2199 00 WASHER 1
(From page 82) •135 2914 2095 00 NUT 1
•140 2914 2096 00 LEVER 1
•20 2914 2192 00 HOUSING 1
•145 2900 0424 00 RING 1
•25 2900 0833 00 BOLT 1
•150 2914 2200 00 LEVER 1
•30 2900 0834 00 HANDLE 1
•155 2914 2138 00 COVER PLATE 1
•35 2914 2203 00 TOWBAR 1
•160 2900 0814 00 CABLE 1
•40 2900 0840 00 HANDLE 1
•165 2914 2201 00 LEVER 1
•45 2900 0839 00 BOLT 1
•170 2914 2204 00 BRAKE CABLE 1
•50 2900 0721 00 ROD 1
•175 2914 2025 00 BOLT 1
•55 2900 0836 00 CLIP 1
•180 2914 2026 00 CLASP 1
•60 2900 0837 00 CLIP 1
•185 2914 2202 00 EQUALIZER 1
•65 2914 2194 00 BUSHING 1
•190 2914 2045 00 RING 3
•70 2914 2195 00 SCHOCK ABSORBER 1
•195 2900 0729 00 NUT 2
•75 2914 2196 00 BELLOWS 1
•200 2900 0823 00 CLAMP 1
•80 1088 1301 03 CABLE STRIP 2
•205 2900 0841 00 CLIP 1
•85 2914 2197 00 BUSH 1
•210 2900 0835 00 CLIP 1
•90 2900 0450 00 O-RING 1
•215 2914 2188 00 BRAKE SEGMENT 1
•95 2914 2198 00 BOLT 1
•220 2914 2097 00 DAMPER 1
•100 2914 2010 00 WASHER 1
•105 2914 2011 00 NUT 1
•110 1619 2642 00 GREASE NIPPLE 2
•115 2900 0850 00 CAP 1
•120 2914 2094 00 BOLT 1
•125 2900 1157 00 WASHER 1

1604 0445 00/00 111

 OPTIONS
PANEL ASSEMBLY

1604 0570 81_01

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 1604 0570 81 PANEL ASSY (From page 87)

•20 0226 3343 17 TAPPING SCREW 4
•25 1604 0576 01 LIGHT LH 1
•30 1604 0577 01 LIGHT RH 1
•31 0301 2321 00 PLAIN WASHER 4
•32 0266 2108 00 HEXAGON NUT 4
•35 1604 0570 00 PANEL 1

112 1604 0570 81/01

 OPTIONS
AXLE
WITH BRAKES

1604 1479 00_00

REF PART NUMBER DESIGNATION QTY REF PART NUMBER DESIGNATION QTY

- 1604 1479 00 AXLE WITH BRAKES (From page 82) •95 - SPRING 2
•20 - AXLE 1 (Part of service kit, see page 30)
(not available separately) •100 - SPRING 4
•25 - CASTLED NUT 2 (Part of service kit, see page 30)
(Part of service kit, see page 31) •105 - SPRING 2
•30 - SPLIT PIN 2 (Part of service kit, see page 30)
(Part of service kit, see page 31) •110 - BRAKE SHOE 4
•35 - SEAL RING 2 (Part of service kit, see page 30)
(Part of service kit, see page 31) •115 2914 2236 00 BRAKE DRUM 2
•40 - RING 2 •120 1619 2804 00 WHEEL BOLT 12
(Part of service kit, see page 31) •125 1619 0319 00 LOCK WASHER 12
•45 - PIN 4 •130 1619 0296 00 FLAT COLLAR NUT 12
(Part of service kit, see page 30) •135 - BEARING 2
•50 2914 2225 00 BOLT 2 (Part of service kit, see page 31)
•55 2914 2226 00 BUSHING 1 •140 - BEARING 2
•60 2914 2237 00 LOCK 2 (Part of service kit, see page 31)
•65 2914 2227 00 SHACKLE 2 •145 - CAP 2
•70 2914 2228 00 CLAMP 2 (Part of service kit, see page 31)
•75 2914 2229 00 ADJUSTING BOLT 2
•80 2914 2230 00 SCREW 2
•85 2914 2231 00 ADJUSTING NUT 2
•90 2914 2232 00 LOCK RING 2

1604 1479 00/00 113

114
www.atlascopco.com
Printed in Belgium 05/2006 - 2955 0730 00