Isogen Symbol Key (SKEY) Definitions

ISOGEN
Symbol Key (SKEY)

Definitions
ALIAS SHALL NOT BE LIABLE FOR TECHNICAL OR It is the policy of Alias Limited to enforce any and all rights
EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN relating to protection of this information. The information
NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES contained in this document is proprietary in nature and may
RESULTING FROM THE FURNISHING PERFORMANCE OR not be reproduced, copied or divulged in whole or in part
USE OF THIS MATERIAL without the prior written consent of Alias Limited. This
manual has been provided pursuant to the terms of a
Alias Limited, contract or confidentiality agreement. Unauthorised
1 Stuart Road, Manor Park, distribution or disclosure of its contents is a violation of that
Runcorn, Cheshire, contract or agreement and persons doing so may be liable
WA7 1TS, for penalties as provided by law.
United Kingdom.
Telephone: +44 (0) 1928 579311
Fax: +44 (0) 1928 579389 Copyright © 1991-2009 Alias Limited. All Rights Reserved.
E-mail: support@alias.ltd.uk
Website: http://www.alias.ltd.uk
ISOGEN Symbol Keys
OVERVIEW .......................................................................................................................................................... 4
SYMBOL KEYS FOR FLANGES / BOLTED JOINTS .......................................................................................... 5

SYMBOL KEYS FOR LJSE TYPE FLANGES ..................................................................................................... 9
SYMBOL KEYS FOR HYGIENIC FITTINGS ...................................................................................................... 10
SYMBOL KEYS FOR MISCELLANEOUS PIPE COMPONENTS ...................................................................... 17
SYMBOL KEYS FOR MISCELLANEOUS ITEMS ............................................................................................. 21
SYMBOL KEYS FOR PENETRATION PLATE ITEMS ...................................................................................... 23
SYMBOL KEYS FOR NOZZLES ....................................................................................................................... 24
SYMBOL KEYS FOR INLINE FILTERS............................................................................................................. 25

SYMBOL KEYS FOR INSTRUMENTS .............................................................................................................. 26
SYMBOL KEYS FOR PIPE BLOCKS ................................................................................................................ 32
SYMBOL KEYS FOR VENTS ............................................................................................................................ 33
SYMBOL KEYS FOR TRAPS ............................................................................................................................ 34
SYMBOL KEYS FOR WELDS ........................................................................................................................... 35
SYMBOL KEYS FOR ELBOWS AND BENDS .................................................................................................. 40

SYMBOL KEYS FOR COUPLINGS ................................................................................................................... 51
2
Copyright © 1991-2009 Alias Limited. All Rights Reserved.
ISOGEN Symbol Keys
SYMBOL KEYS FOR CAPS .............................................................................................................................. 53
SYMBOL KEYS FOR CROSSES....................................................................................................................... 55

SYMBOL KEYS FOR FIXED LENGTH PIPES................................................................................................... 58
SYMBOL KEYS FOR OLETS ............................................................................................................................ 60
SYMBOL KEYS FOR SPINDLES ...................................................................................................................... 63
SYMBOL KEYS FOR TEES ............................................................................................................................... 66
SYMBOL KEYS FOR REDUCERS .................................................................................................................... 72
SYMBOL KEYS FOR UNIONS .......................................................................................................................... 81
SYMBOL KEYS FOR SUPPORTS .................................................................................................................... 82

SYMBOL KEYS FOR VALVES .......................................................................................................................... 84
SYMBOL KEYS FOR 3-WAY VALVES ............................................................................................................. 87
SYMBOL KEYS FOR 4-WAY VALVES ............................................................................................................. 88
SYMBOL CLAMPED JOINTS ............................................................................................................................ 89
SYMBOL LINERS (CONNECTORS ) ................................................................................................................ 90
SYMBOL COUPLINGS ...................................................................................................................................... 91
3
ISOGEN Symbol Keys
Overview
This document is intended to comprehensively cover all current ISOGEN SKEY symbol shapes. Below is a brief description about
SKEY’s and some further information to help understand SKEY construction.
All components generated by ISOGEN are defined by a unique code called an SKEY (symbol key). All components have a 2 to 4
letter SKEY, the first two characters define the type of component it is and if the component can have different end t ypes such as
flanged, butt weld, screwed etc. then these are defined by the last two characters.
The ** characters in the SKEY may be replaced for an appropriate end condition from the following:
BW for Butt Weld
CP for Compression
SW for Socket Weld
FL for Flanged
SC for Screwed
PL for Plain End
LN for Liner/Nut
LC for Liner/Clamp
LR for Reducing Liner/Nut
MP for Male Part
PF for Push Fit
GL for Glued
CL for Clamped
FA for Flared
BS (or SB) for Ball and Socket (used on fixed length type pipe work)
GF for Gland (used on fixed length type pipe work)
The @ character in the SKEY may be replaced with an integer value in the range 1 to 9 to denote the number of segments.
The + character in the SKEY may be replaced with an integer value in the range 1 to 9 to denote the bend radius. This is for
identification only and will not be used for pipe length calculations.
4
ISOGEN Symbol Keys
Symbol Keys for Flanges / Bolted Joints
Plotted Isometric User PCF

Description SKEY Shape IDF Record
Shape Definable Identification
Flange – Blind
(also known as a blank –
FLBL YES FLANGE-BLIND 107
symbol includes tapping
connections)
Flange – Flared / Loose

FLFL YES FLANGE 105
Backing
Flange – Loose backing FLLB YES FLANGE 105
FLANGE-
Flange – Reducing Concentric FLRC YES REDUCING- 65/0
CONCENTRIC
FLANGE-
Flange – Reducing Eccentric FLRE YES REDUCING- 65/0
ECCENTRIC
Flange – Screwed FLSC YES FLANGE 105
5
ISOGEN Symbol Keys

Flange – Slip on with ‘J’ type

FLSJ YES FLANGE 105
weld
Flange – Slip on FLSO YES FLANGE 105
Flange – Orifice slip on with Tap

FOSO YES FLANGE 105
points
Flange – Socket weld FLSW YES FLANGE 105
Flange – Weld Neck FLWN YES FLANGE 105
Flange Orifice Weld neck with

FOWN YES FLANGE 105
Tap points
Flange – Lap Joint Ring / Stub

FBSE YES FLANGE 105
End Combined
6
ISOGEN Symbol Keys

Cast / Lined Fixed Flange

FLFF YES FLANGE 105
(Female) – cast / lined flange
Cast / Lined Rotating Flange FLFR YES FLANGE 105
Cast / Lined Flange – Gland YES FLANGE 105

FLGF
Type (Female)
Cast / Lined Flange – Gland YES FLANGE 105

FLGM
Type (Male)
Glued (Female) connection FLGL YES FLANGE 105
YES FLANGE 105

Push Fit (Female) connection FLPF
Seal Welded Flange (Sarlun / YES FLANGE 105

FLSF
Sargol) (Female) connection
7
ISOGEN Symbol Keys

Seal Welded Flange (Sarlun / FLSM

YES FLANGE 105
Sargol) (Male) connection
8
ISOGEN Symbol Keys
Symbol Keys for LJSE Type Flanges

Lap Joint Ring FLRG YES LAPJOINT-RING 106

(Loose Backing Flange)
Lap Joint Stub End FLSE YES LAPJOINT-STUB- 106

(Loose Backing Flange END
Stub End (LJSE) – use with FLMP YES LAPJOINT-STUB- 106

glued / push fit systems END
9
ISOGEN Symbol Keys
Symbol Keys for Hygienic Fittings
Plotted Flow Flow PCF

User IDF
Description SKEY Shape Isometric
Definable Arrow Dependency Identification Record
Shape
Male Part Connector MPBW YES N N CONNECTOR 111

Butt Weld
Male Part Connector MPEX YES N N CONNECTOR 111

Expanded
Clamp Liner Butt Weld LCBW YES N N CONNECTOR 111
Clamp Liner Expanded LCEX YES N N CONNECTOR 111
Backing Nut Liner Butt LNBW YES N N CONNECTOR 111

Weld
Backing Nut Liner LN YES N N CONNECTOR 111
10
ISOGEN Symbol Keys

User IDF
Shape
Backing Nut Reducing LRBW YES N N CONNECTOR 111

Liner Butt Weld
Backing Nut Reducing LREX YES N N CONNECTOR 111

Liner Expanded
Backing Nut BNUT YES N N NUT 112
Clamp CLMP YES N N CLAMP 113
Drain / Vent Plug DVP YES N N MISC- 114

HYGENIC
Male Blanking Plug BM YES N N MISC- 114

HYGENIC
Blank Plain BP YES N N MISC- 114

HYGENIC
11
ISOGEN Symbol Keys

User IDF
Shape
Reducing Concentric BBC YES N N MISC- 114/0

Blank Boss HYGENIC
Reducing Eccentric BBE YES N N MISC- 114/0

Blank Boss HYGENIC
Blank Thermocouple BTP YES N MISC- 114/0

Connector HYGENIC
Male to Male Adapter ADMM YES N MISC- 114

HYGENIC
Male to Female Adapter ADMF YES N MISC- 114

HYGENIC
2 Port Single Level 2Z**

(Angle Type) Valve (Z) YES N
VALVE-ANGLE 75/76
12
ISOGEN Symbol Keys

User IDF
Shape
2 Port Single Level 2D**

(Angle Type) Valve (D) YES N
VALVE-ANGLE 75/76

Valve (Z) YES N
VALVE-3WAY 80/0/81/
82

Valve (D) YES 80/0/81/
N N VALVE-3WAY 82

Valve (Z) YES 85/0/86/
N N VALVE-4WAY 87/
88
13
ISOGEN Symbol Keys

User IDF
Shape

Valve (D) YES 85/0/86/
N N VALVE-4WAY 87/
88
Multi-Port Dual Level MD**

Valve with D Spindle 75/76
80/0/81/
YES VALVE- 82
N N MULTIWAY 85/0/86/
87/
88
Multi-Port Dual Level MZ**

Valve with Z Spindle
75/76
YES 80/0/81/
N N VALVE- 82
MULTIWAY 85/0/86/
87/
88
14
ISOGEN Symbol Keys

User IDF
Shape
Separator for Multi Level DUMY YES

Valve N N N/A N/A
Graduated Control IG**

Valve (D) YES
Y N INSTRUMENT 90/93
Non Return Valve NV** YES

N Y VALVE 130
3 Way Check Valve K3** YES 80/0/81/

N N VALVE-3WAY 82
Wide Angle Cock KV** YES 130

Y N VALVE
15
ISOGEN Symbol Keys

User IDF
Shape
Pressure Relief Valve VZ** YES VALVE 130

(Z) N Y
Butterfly Valve ZB** VALVE 130

YES Y N
Graduated Control ZG** VALVE 130

Valve (Z) YES Y N
Pressure Relief Valve ZV** INSTRUMENT 90/93

(Instrument Type) (I) YES N Y
16
ISOGEN Symbol Keys
Symbol Keys for Miscellaneous Pipe Components
Plotted Flow Flow

User PCF IDF
Shape
Block - Angle BA** MISC-

YES N N COMPONENT- 95/96
ANGLE
Expansion Bellows EX** YES Y N MISC- 95/96

COMPONENT
Flame Trap FT** YES Y N MISC- 95/96

COMPONENT
Flexible Hose FX** YES Y N MISC- 95/96

COMPONENT
Hose Coupling CH** YES N N MISC-

COMPONENT 95/96
17
ISOGEN Symbol Keys
Plotted Flow Flow

User PCF IDF
Shape
Non Category Item NC** YES N N MISC-

COMPONENT 95/96
Block Offset BO** MISC-

YES Y N COMPONENT- 95/96
OFFSET
Block Return BR** MISC-

YES Y N COMPONENT- 95/96
RETURN
Plug PL YES N N MISC- 95/96

COMPONENT
Restrictor Plate RP YES Y N MISC- 95/96

COMPONENT
Reinforcing Pad RPAD NO N N REINFORCE- NONE

MENT PAD
18
ISOGEN Symbol Keys
Plotted Flow Flow

User PCF IDF
Shape
Sight Glass SG** MISC- 95/96

YES Y N COMPONENT
Slip Plate SP YES N N MISC- 95/96

COMPONENT
Slip Ring SR YES N N MISC- 95/96

COMPONENT
Spectacle Blind - Closed SB MISC-

YES N N COMPONENT 95/96
Spectacle Blind - Open OB MISC-

YES N N COMPONENT 95/96
Tundish (funnel) TU**

YES Y Y MISC- 95/96
COMPONENT
19
ISOGEN Symbol Keys
20
ISOGEN Symbol Keys
Symbol Keys for Miscellaneous Items

Insulation Symbol INPP YES INSULATION- 149

SYMBOL
Floor Symbol FLOR YES FLOOR- 149

SYMBOL
Flow Arrow FLOW YES FLOW-ARROW 149
Location Point LOPT NO LOCATION- 149

POINT
Wall WALL YES 149
21
ISOGEN Symbol Keys

Arrow Head – Dimension AR01 YES N/A N/A

Line
Arrow Head – Message AR02 YES N/A N/A

Line
Line Break AR04 YES N/A N/A
22
ISOGEN Symbol Keys
Symbol Keys for Penetration Plate Items

Penetration Plate End PLT1

Sections YES Used with Used with
PENETRATION- CRPP
PLATE
Penetration Plate Centre PLT2

Sections YES Used with Used with
PENETRATION- CRPP
PLATE
Locating Pin LPIN

YES MISC- 95/96
COMPONENT
23
ISOGEN Symbol Keys
Symbol Keys for Nozzles

Nozzle - Start Flanged NZFS YES NOZZLE -31
Nozzle - End Flanged NZFE YES NOZZLE -31
Nozzle - Start Welded NZWS YES NOZZLE -31
Nozzle - End Welded NZWE YES NOZZLE -31
24
ISOGEN Symbol Keys
Symbol Keys for Inline Filters
Plotted Flow Flow

User PCF IDF
Shape
Filter / Strainer – FI**

Straight Through YES Y Y FILTER 136/137
Filter / Strainer – Angle FA**

YES N N FILTER-ANGLE 136/137
Filter / Strainer – Offset FO** YES Y N FILTER-

OFFSET 136/137
Filter / Strainer – Return FR**

YES Y N FILTER- 136/137
RETURN
25
ISOGEN Symbol Keys
Symbol Keys for Instruments
Plotted Isometric User Flow Flow PCF IDF

Description SKEY Shape
Shape Definable Arrow Dependency Identification Record
Instrument II**
YES N N INSTRUMENT 90/93
Instrument - IA**
Angle YES N N INSTRUMENT- 90/93
ANGLE
Instrument - IO** YES Y N INSTRUMENT- 90/93

Offset OFFSET
Instrument - IR** YES Y N INSTRUMENT- 90/93

Offset RETURN
Instrument - Dial IDPL NO N N INSTRUMENT- 90

N/A DIAL
26
ISOGEN Symbol Keys
Instrument – IDFL NO N N INSTRUMENT- 90

Dial Flanged N/A DIAL
Orifice Plate OP
YES Y N INSTRUMENT 90/93
Restrictor Plate PR
YES Y N INSTRUMENT 90/93
Rupture Disk DR YES Y Y INSTRUMENT 90/93
Control Valve CV** INSTRUMENT 90/93

YES Y N
3 Way Control C3** INSTRUMENT- 90/0/91/

Valve YES N N 3WAY 93
4 Way Control C4** INSTRUMENT- 90/0/91/

Valve YES N N 4WAY 92/
93
27
ISOGEN Symbol Keys
Angled Control CA**

Valve YES N N INSTRUMENT- 90/93
ANGLE
Hand Operated HV**

Control Valve YES Y N INSTRUMENT 90/93
Hand Operated H3**

3 Way Control YES N N INSTRUMENT- 90/0/91/
Valve 3WAY 93
Hand Operated H4** 90/0/91/

4 Way Control YES N N INSTRUMENT- 92/
Valve 4WAY 93
Hand Operated HA**

Angled Control YES N N INSTRUMENT- 90/93
Valve ANGLE
28
ISOGEN Symbol Keys
Motor Operated MV**

Motor Operated M3**

Valve 3WAY 93
Motor Operated M4** 90/0/91/

4 Way Control YES N N INSTRUMENT- 92/
Valve 4WAY 93
Motor Operated MA**

Angled Control YES N N INSTRUMENT- 90/93
Valve ANGLE
Instrument SA**
Angle Control YES N N INSTRUMENT- 90/93
Valve with ANGLE
Square Indicator
29
ISOGEN Symbol Keys
Square Indicator SV**

Square Indicator S3**

Valve 3WAY 93
Square Indicator S4** YES INSTRUMENT- 90/0/91/

4 Way Control N N 4WAY 92/
Valve 93
Angled XA**
Pressure YES Y N INSTRUMENT- 90/93
Reducing Angle ANGLE
Pressure XV**
Reducing YES Y Y INSTRUMENT- 90/93
Instrument ANGLE
Valve
Angled RA**
Relief/Vent YES Y N INSTRUMENT- 90/93
Instrument ANGLE
Valve
30
ISOGEN Symbol Keys
Relief/Vent RV** YES

Instrument Y N INSTRUMENT 90/93
Valve
31
ISOGEN Symbol Keys
Symbol Keys for Pipe Blocks

Pipe Block Fixed Length PF YES PIPE-BLOCK- 102

FIXED
Pipe Block Variable PV YES PIPE-BLOCK- 103

Length VARIABLE
32
ISOGEN Symbol Keys
Symbol Keys for Vents
Plotted Flow Flow

User PCF IDF
Shape
Rupture Disk RD YES Y Y SAFETY-DISC 134
33
ISOGEN Symbol Keys
Symbol Keys for Traps

Trap - Angle TA**

YES N N TRAP-ANGLE 132/133
Trap – Offset TO** YES

Y N TRAP- 132/133
OFFSET
Trap – Return TR** YES

Y N TRAP- 132/133
RETURN
Trap - Inline TI** YES

N N TRAP 132/133
34
ISOGEN Symbol Keys
Symbol Keys for Welds

Weld – Workshop Weld WW YES WELD 120
Weld – Dotted Workshop WWD YES WELD 120

Weld
Weld – Site WS YES WELD 120
Weld – Tack for site weld WST YES WELD 120
Weld – Dotted Site Weld WSD YES WELD 120
Weld – Field Fit WF YES WELD 120
Weld – Tack for Field Fit WFT YES WELD 120
35
ISOGEN Symbol Keys

Weld – Dotted Field Fit Weld WFD YES WELD 120
Weld – Offshore WO YES WELD 120
Weld – Tack for Offshore WOT YES WELD 120

Weld
Weld – Dotted Offshore Weld WOD YES WELD 120
Weld – Offshore Field Fit WOF YES WELD 120

Weld
Weld – Tack for Offshore WOFT YES WELD 120

Field Fit Weld
Weld – Special Site Weld WSSP YES WELD 120

(non spooling)
Weld – Automatic Workshop WWA YES WELD 120

Weld
36
ISOGEN Symbol Keys

Eld – Field Fit Weld with
Shop Test Requirement WFST YES WELD 120
Weld – Field Fit Offshore WOFD YES WELD 120

Dotted
Weld – Mitre WM N/A NO WELD 120
Weld – Mitre Field Fit WMF N/A NO WELD 120
Weld – Mitre Tack WMT N/A NO WELD 120
Weld – Mitre Field Fit Tack WMFT N/A NO WELD 120
Weld – Site Workshop Test WSST NO WELD 120
37
ISOGEN Symbol Keys

Weld – WorkShop Shop Test WWST NO WELD 120
Weld – Offshore Shop Test WOST NO WELD 120
Weld – Offshore Field Fit WVST NO WELD 120

Shop Test
Weld – Support ZSP* NO WELD 120
Weld – Trunnion ZTN* NO WELD 120
38
ISOGEN Symbol Keys

Weld – Reinforced Trunnion ZTR* NO WELD 120
Weld – Site Socket XX N/A NO WELD 120

/Screwed/Compression
Weld – Site Socket XXD N/A NO WELD 120

/Screwed/Compression
Dotted
Seal Weld – Erection WSSR YES WELD 120
Seal Weld – Offshore WOSR YES WELD 120
39
ISOGEN Symbol Keys
Symbol Keys for Elbows and Bends

Elbow – Butt Weld ELBW N/A NO ELBOW 35/36

(90° and 45°)
Elbow – Compression ELCP N/A NO ELBOW 35/36

(90° and 45°)
Elbow -Screwed ELSC N/A NO ELBOW 35/36

(90° and 45°)
With Female Ends
Elbow – Socket Weld ELSW N/A NO ELBOW 35/36

(90° and 45°)
Elbow – Screwed EBSC N/A NO ELBOW 35/36

(90° and 45°)
With Male Ends
40
ISOGEN Symbol Keys

Teed Elbow – Socket Weld (90° ETSW N/A NO ELBOW-TEED 70/0/71/72

and 45°)
Teed Elbow – Screwed (90° and ETSC N/A NO ELBOW-TEED 70/0/71/72

45°)
Teed Elbow – Compression (90° ETCP N/A NO ELBOW-TEED 70/0/71/72

and 45°)
Teed Elbow – Butt Weld ETBW N/A NO ELBOW-TEED 70/0/71/72

(90° and 45°)
Reducing Elbow ER** N/A NO ELBOW- 35/36

REDUCING
41
ISOGEN Symbol Keys

Return Elbow – Butt Weld 180° EUBW N/A NO ELBOW 35/36
Return Elbow - Plain End 180° EUPL N/A NO ELBOW 35/36
Teed Bend – Flanged (all angles) BTFL N/A NO BEND-TEED 70/0/71/72
Mitre Tee Bend – Butt Weld MTBW N/A NO BEND-TEED 70/0/71/72
Mitre Bend – Butt Weld MIBW N/A NO BEND 30/31
Mitre Bend – Flanged MIFL N/A NO BEND 30/31
42
ISOGEN Symbol Keys

Mitre Tee Bend - with Plain Ends MTPL N/A NO BEND-TEED 70/0/71/72
Mitre Tee Bend - Flanged MTFL N/A NO BEND-TEED 70/0/71/72
Bend – Flanged BEFL N/A NO BEND 30/31

(all angles)
Bend - Multi-Axis Lined Pipes

Must be used in conjunction with BM** N/A NO BEND 30/31
PIPELINE-TYPE
180° Return Bend - Flanged BUFL N/A NO BEND 30/31
43
ISOGEN Symbol Keys

Lobster Bend – Butt Weld L@BW N/A NO BEND 30/31
Lobster Tee T@BW N/A NO BEND-TEED 70/0/71/72

Bend – Butt Weld
Lobster Bend – Flanged L@FL N/A NO BEND 30/31
T@FL N/A NO BEND-TEED 70/0/71/72

Lobster Tee Bend – Flanged
Bend – Pulled (all angles) PB+D N/A NO BEND 30/31
180° Return Bend – Pulled BU+D N/A NO BEND 30/31
44
ISOGEN Symbol Keys

TB+D N/A NO BEND-TEED 70/0/71/72

Tee Bend – Pulled (all angles)
Bend - Pulled with Weld at each PBBW N/A NO BEND 30/31

end
180° Return Bend - Pulled with BUBW N/A NO BEND 30/31

Weld at each end
Tee Bend - Pulled with Weld at TBBW N/A NO BEND-TEED 70/0/71/72

each end
Bend with glued end connection BEGL N/A NO BEND 30/31

(Ends can be individually
designated MALE or FEMALE)
FEMALE MALE
Bend with push fit connection BEPF N/A NO BEND 30/31

FEMALE MALE
45
ISOGEN Symbol Keys

Bend with flared end connection BEFA N/A YES BEND 30/31
Bend with clamped end connection BECL N/A YES BEND 30/31
46
ISOGEN Symbol Keys
Bend with flanged ball / socket end BEBS N/A YES BEND 30/31
connection (Ends can be
individually designated MALE or FEMALE MALE
FEMALE)
Tee Bend with flanged ball / socket BTBS N/A YES BEND-TEED 70/0/71/72
end connections (Ends can be
individually designated MALE or
FEMALE) FEMALE MALE
Bend with flanged gland type end BEGF N/A YES BEND 30/31
connections (Ends can be
FEMALE)
Tee Bend with flanged gland type TBGF N/A YES BEND-TEED 70/0/71/72
end connection (Ends can be
FEMALE) FEMALE MALE
Elbow with glued end connections ELGL N/A YES ELBOW 35/36
FEMALE MALE
Elbow with push fit end ELPF N/A YES ELBOW 35/36
FEMALE)
47
ISOGEN Symbol Keys
FEMALE MALE
Elbow with flared end connections ELFA N/A YES ELBOW 35/36
Elbow with clamped end ELCL N/A YES ELBOW 35/36

connections
Elbow with flanged ball / socket ELBS N/A YES ELBOW 35/36
end connections (Ends can be
FEMALE) FEMALE MALE
Elbow with flanged gland type end ELGF N/A YES ELBOW 35/36
FEMALE)
Teed Elbow with glued end ETGL N/A YES ELBOW-TEED 70/71/72
FEMALE)
FEMALE MALE
48
ISOGEN Symbol Keys
Teed Elbow with push fit end ETPF N/A YES ELBOW-TEED 70/71/72
FEMALE)
FEMALE MALE
Teed Elbow with flared end ETFA N/A YES ELBOW-TEED 70/71/72
connections
Teed Elbow with clamped end ETCL N/A YES ELBOW-TEED 70/71/72
connections
Reducing Elbow with glued end ERGL N/A YES ELBOW-- 35/36
connections connections (Ends REDUCING
can be individually designated FEMALE MALE
MALE or FEMALE)
Reducing Elbow with push fit end ERPF N/A YES ELBOW-- 35/36
connections (Ends can be REDUCING
FEMALE MALE
FEMALE)
Reducing Elbow with flared end ERFA N/A YES ELBOW-- 35/36
connections REDUCING
49
ISOGEN Symbol Keys
Reducing Elbow with clamped end ERCL N/A YES ELBOW-- 35/36
connections REDUCING
50
ISOGEN Symbol Keys
Symbol Keys for Couplings

Nipple – Running Screwed NRSC YES COUPLING 126
Nipple – Barrel Screwed NBSC YES COUPLING 126
Coupling – Compression COCP YES COUPLING 126
Coupling – Screwed COSC YES COUPLING 126
Coupling – Socket Weld COSW YES COUPLING 126
Elbolet Coupling Butt Weld CEBW YES ELBOLET 126/0
51
ISOGEN Symbol Keys

Elbolet Coupling Screwed CESC YES ELBOLET 126/0
Elbolet Coupling Socket CESW YES ELBOLET 126/0

Weld
52
ISOGEN Symbol Keys
Symbol Keys for Caps

Butt Weld Cap KABW YES CAP 125/0

(symbol includes tapping
connections)
Compression Cap KACP YES CAP 125/0
Screwed Cap KASC YES CAP 125/0
Socket Weld Cap KASW YES CAP 125/0
Flanged Cap KAFL YES CAP 125/0
Glued Cap KAGL YES CAP 125/0
53
ISOGEN Symbol Keys

Push Fit Cap KAPF YES CAP 125/0
Flared Cap KAFA N/A YES CAP 125/0
Clamped Cap KACL N/A YES CAP 125/0
54
ISOGEN Symbol Keys
Symbol Keys for Crosses

Cross CR** N/A NO CROSS 50/0/51/52/53
Uses
Cross – 'Y' Type CY** YSML YES CROSS 50/0/51/52/53
YMED
YLRG
Cross – Set On CRSO N/A NO CROSS-SET-ON

Or 50/0/51/52/53
CROSS-STUB
Cross – Set On Reinforced CRRF N/A NO CROSS-SET-ON

Or 50/0/51/52/53
CROSS-STUB
Cross – Stub In CSSO N/A NO CROSS-SET-ON

Or 50/0/51/52/53
CROSS-STUB
55
ISOGEN Symbol Keys

Cross – Stub In Reinforced CSRF N/A NO CROSS-SET-ON

Or 50/0/51/52/53
CROSS-STUB
Uses
Cross – Set On 'Y' Type CYSO YSML YES CROSS-SET-ON
YMED Or 50/0/51/52/53
YLRG CROSS-STUB
Cross with glued end CRGL N/A

connections (Ends can be YES CROSS 50/0/51/52/53
individually designated
MALE or FEMALE) FEMALE MALE
Cross with push fit end CRPF N/A

connections (Ends can be YES CROSS 50/0/51/52/53
Cross with flared end CRFA N/A

connections YES CROSS 50/0/51/52/53
56
ISOGEN Symbol Keys

Cross with clamped end CRCL N/A

connections YES CROSS 50/0/51/52/53
Cross with flanged ball / CRBS N/A

socket end connections YES CROSS 50/0/51/52/53
FEMALE MALE
designated MALE or
FEMALE)
Cross with flanged gland CRGF

type end connections (Ends YES CROSS 50/0/51/52/53
can be individually FEMALE MALE
designated MALE or
FEMALE)
57
ISOGEN Symbol Keys
Symbol Keys for Fixed Length Pipes

Fixed Length Pipe with FPFL NO PIPE-FIXED 101

Integral ends
Fixed Length Pipe FPPL YES PIPE-FIXED 101

without Flanged ends
Fixed Pipe – flared end FPFA YES PIPE-FIXED 101

connections
Fixed Pipe – clamped FPCL YES PIPE-FIXED 101

end conditions
Fixed Pipe – glued end FPGL

connections (Ends can YES PIPE-FIXED 101
be individually designated
Fixed Pipe – push fit end FPPF

conditions (Ends can be YES PIPE-FIXED 101
58
ISOGEN Symbol Keys

Fixed Pipe – screwed FPSC

end conditions (Ends can YES PIPE-FIXED 101
Fixed Pipe – socket weld FPSW

end conditions (Ends can YES PIPE-FIXED 101
Fixed Pipe – FPCP

compression end YES PIPE-FIXED 101
conditions (Ends can be
FEMALE MALE
MALE or FEMALE)
Fixed Pipe – with flanged FPFL

ball and socket (Ends
YES PIPE-FIXED 101
can be individually
designated MALE or FEMALE MALE FEMALE MALE
FEMALE)
59
ISOGEN Symbol Keys
Symbol Keys for Olets

Olet – Half Coupling HCSC YES OLET 40/0/41/42

Screwed
Olet – Half Coupling Socket HCSW YES OLET 40/0/41/42

Weld
Olet – Nipolet NI** YES OLET 40/0/41/42
Olet – Nipolet Screwed NISC YES OLET 40/0/41/42
Olet – Sockolet Socket SKSW YES OLET 40/0/41/42

Weld
60
ISOGEN Symbol Keys

Olet – Sweepolet Butt Weld SWBW YES OLET 40/0/41/42
Olet – Thredolet Screwed THSC YES OLET 40/0/41/42
Olet – Weldolet Butt Weld WTBW YES OLET 40/0/41/42
Olet – Latrolet Screwed LASC YES OLET 40/0/41/42
Olet – Latrolet Socket Weld LASW YES OLET 40/0/41/42
61
ISOGEN Symbol Keys

Olet – Latrolet Butt Weld LABW YES OLET 40/0/41/42
Instrument Tee - Flanged ITFL N INSTRUMENT- 40/0/41/42

TEE
62
ISOGEN Symbol Keys
Symbol Keys for Spindles
User PCF
Definable Identification
Spindle 1 01SP YES N/A N/A
63
ISOGEN Symbol Keys
User PCF
64
ISOGEN Symbol Keys
User PCF
65
ISOGEN Symbol Keys
Symbol Keys for Tees

Tee TE** N/A NO TEE 45/0/46/47
Uses
Tee – 'Y' Type TY** YSML YES TEE 45/0/46/47
YMED
YLRG
Uses
Tee – Set On 'Y' Type TYSO YSML YES TEE-SET-ON 45/0/46/47
YMED Or
YLRG TEE-STUB
Tee – Set On TESO N/A NO TEE-SET-ON 45/0/46/47

Or
TEE-STUB
Tee – Set On Reinforced TERF N/A NO TEE-SET-ON 45/0/46/47

Or
TEE-STUB
66
ISOGEN Symbol Keys

Tee – Stub In TSSO N/A NO TEE-SET-ON 45/0/46/47

Or
TEE-STUB
Tee – Stub In Reinforced TERF N/A NO TEE-SET-ON 45/0/46/47

Or
TEE-STUB
Tee – Socket Weld TESW N/A NO TEE 45/0/46/47
Tee – Swept Branch Butt Weld TSBW N/A NO TEE 45/0/46/47
Tee – Swept Branch Flanged TSFL N/A NO TEE 45/0/46/47
67
ISOGEN Symbol Keys

Tee – Swept Socket Weld TSSW N/A NO TEE 45/0/46/47
Tee – Swept Compression TSCP N/A NO TEE 45/0/46/47
Tee – Ghost Tee TEGG N/A NO TEE 45/0/46/47
Tee – Pulled Out TPUL N/A NO TEE 45/0/46/47
68
ISOGEN Symbol Keys

Tee – Offset Tee Reinforced TROF N/A NO TEE 45/0/46/47

Set-on
Tee – Tangential Tee Set-on TOSO N/A NO TEE 45/0/46/47
Tee – Tangential Tee TTRF N/A NO TEE 45/0/46/47

Reinforced Set-on
Tee – Offset Tee Set-on TTSO N/A NO TEE 45/0/46/47
Instrument Tee IT** N/A NO INSTRUMENT- 40/41/42/0

TEE
'Y' Type Tee - Large YLRG See 'Y' Type YES See 'Y' Type
Used for 'Y' Type Tees/Crosses Tee/Cross Tee/Cross
69
ISOGEN Symbol Keys

'Y' Type Tee - Medium YMED See 'Y' Type YES See 'Y' Type
'Y' Type Tee - Small YSML See 'Y' Type YES See 'Y' Type
Tee with glued end connections TEGL N/A

(Ends can be individually YES TEE 45/0/46/47
FEMALE MALE
Tee with push fit end TEPF N/A

connections (Ends can be YES TEE 45/0/46/47
FEMALE)
FEMALE MALE
Tee with flared end connections TEFA N/A

YES TEE 45/0/46/47
Tee with clamped end TECL N/A

connections YES TEE 45/0/46/47
70
ISOGEN Symbol Keys

Tee with flanged ball / socket TEBS N/A

end connections (Ends can be YES TEE 45/0/46/47
FEMALE)
FEMALE MALE
Tee with flanged gland type end TEGF N/A

connections (Ends can be YES TEE 45/0/46/47
FEMALE)
FEMALE MALE
71
ISOGEN Symbol Keys
Symbol Keys for Reducers

Reducer – Concentric RC** REDUCER-

YES N N CONCENTRIC 55/0
Reducer – Concentric CTBW YES REDUCER- 60/0/61/

Butt Weld with a N N CONCENTRIC 62
Connection -TEED
Reducer – Concentric CTSW YES REDUCER- 60/0/61/

Socket Weld with a N N CONCENTRIC 62
Connection -TEED
Reducer – Concentric CPBW YES REDUCER-

Butt Weld Fabricated N N CONCENTRIC 55/0
from plate
Reducer – Concentric CSBW YES REDUCER-

Butt Weld Swaged from N N CONCENTRIC 55/0
pipe
72
ISOGEN Symbol Keys

Reducer – Concentric CZBW YES REDUCER- 60/0/61/

Fabricated from plate N N CONCENTRIC 62
with a Connection -TEED
Reducer – Concentric CZFL REDUCER- 60/0/61/

Fabricated from Plate YES N N CONCENTRIC 62
Flanged with a -TEED
Connection
Reducer – Concentric CXBW REDUCER-

Swaged from pipe with YES N N CONCENTRIC 60/0/61/
a connection -TEED 62
Reducer – Concentric CPFL

Fabricated from plate - YES N N REDUCER- 55/0
Flanged CONCENTRIC
Reducer – Concentric CSFL

Swaged from plate - YES N N REDUCER- 55/0
Flanged CONCENTRIC
73
ISOGEN Symbol Keys

Reducer – Concentric CTFL

Flanged with a YES N N REDUCER- 60/0/61/
connection CONCENTRIC 62
-TEED
Reducer – Concentric CXFL REDUCER-

Swaged from pipe YES N N CONCENTRIC 60/0/61/
Flanged with a -TEED 62
connection
Reducer – Concentric RNSC REDUCER-

Screwed Nipple YES N N CONCENTRIC 55/0
Reducer – Concentric CTSC REDUCER- 60/0/61/

Screwed with a YES N N CONCENTRIC 62
connection -TEED
Reducer – Concentric RBSC REDUCER-

Screwed Bush YES N N CONCENTRIC 55/0
74
ISOGEN Symbol Keys

Reducer – Concentric RBSW REDUCER-

Socket Weld Bush YES N N CONCENTRIC 55/0
Reducer – Eccentric RE** YES N N REDUCER-

ECCENTRIC 55/0
Reducer – Eccentric EPBW YES N N REDUCER-

Fabricated from Plate ECCENTRIC 55/0
Reducer – Eccentric ESBW YES N N REDUCER-

Swaged from Pipe ECCENTRIC 55/0
Reducer – Eccentric OTBW YES N N REDUCER- 60/0/61/

Butt Weld with a ECCENTRIC- 62
Connection TEED
Reducer – Eccentric EZBW REDUCER- 60/0/61/

Butt Weld Fabricated YES N N ECCENTRIC- 62
from Plate with a TEED
Connection
Reducer – Eccentric EXBW YES N N REDUCER- 60/0/61/

Butt Weld Swaged from ECCENTRIC- 62
Pipe with a Connection TEED
75
ISOGEN Symbol Keys

Reducer – Eccentric OTSC YES N N REDUCER- 60/0/61/

Screwed with a ECCENTRIC- 62
Connection TEED
Reducer – Eccentric EPFL YES N N REDUCER- 55/0

Flanged Fabricated from ECCENTRIC
Plate
Reducer – Eccentric ESFL YES N N REDUCER- 55/0

Flanged Swaged from ECCENTRIC
Pipe
Reducer – Eccentric OTFL REDUCER- 60/0/61/

Flanged with a YES N N ECCENTRIC- 62
Connection TEED
Reducer – Eccentric EZFL REDUCER- 60/0/61/

Flanged Fabricated from YES N N ECCENTRIC- 62
Plate with a Connection TEED
Reducer – Eccentric EXFL REDUCER- 60/0/61/

Flanged Swaged from YES N N ECCENTRIC- 62
Pipe with a Connection TEED
76
ISOGEN Symbol Keys

Reducing Block RFPL REDUCER-

YES Y N CONCENTRIC 55/0
Concentric Reducer with RCGL N/A REDUCER-

glued end conditions YES Y N CONCENTRIC 55/0
(Ends can be
individually designated FEMALE MALE
MALE or FEMALE)
Concentric Reducer with RCPF N/A REDUCER-

push fit end connections YES Y N CONCENTRIC 55/0
(Ends can be
MALE or FEMALE)
Concentric Reducer with RCFA N/A REDUCER-

flared end connections YES Y N CONCENTRIC 55/0
Concentric Reducer with RCCL N/A REDUCER-

clamped end YES Y N CONCENTRIC 55/0
connections
77
ISOGEN Symbol Keys

Concentric Teed CTGL N/A REDUCER- 60/0/61/

Reducer with glued end YES N N CONCENTRIC 62
connections (Ends can -TEED
be individually FEMALE MALE
designated MALE or
FEMALE)
Concentric Teed CTPF N/A REDUCER- 60/0/61/

Reducer with push fit YES N N CONCENTRIC 62
end connections (Ends -TEED
can be individually
designated MALE or FE MALE MALE
FEMALE)
Concentric Teed CTFA N/A REDUCER- 60/0/61/

Reducer with flared end YES N N CONCENTRIC 62
connections -TEED
Concentric Teed CTCL N/A REDUCER- 60/0/61/

Reducer with clamped YES N N CONCENTRIC 62
end connections -TEED
78
ISOGEN Symbol Keys

Eccentric Reducer with REGL N/A YES N N REDUCER- 55/0

glued end conditions ECCENTRIC
(Ends can be
FEMALE MALE
MALE or FEMALE)
Eccentric Reducer with REPF N/A YES N N REDUCER- 55/0

push fit end connections ECCENTRIC
(Ends can be
MALE or FEMALE)
Eccentric Reducer with REFA N/A YES N N REDUCER- 55/0

flared end connections ECCENTRIC
Eccentric Reducer with RECL N/A YES N N REDUCER- 55/0

clamped end ECCENTRIC
connections
Eccentric Teed Reducer OTGL N/A REDUCER- 60/0/61/

with glued end YES N N CONCENTRIC 62
be individually
FEMALE MALE
designated MALE or
FEMALE
79
ISOGEN Symbol Keys

Eccentric Teed Reducer OTPF N/A REDUCER- 60/0/61/

with push fit end YES N N CONCENTRIC 62
be individually
designated MALE or
FEMALE MALE
FEMALE
Eccentric Teed Reducer OTFA N/A REDUCER- 60/0/61/

with flared end YES N N CONCENTRIC 62
connections -TEED
Eccentric Teed Reducer OTCL N/A REDUCER- 60/0/61/

with clamped end YES N N CONCENTRIC 62
connections -TEED
80
ISOGEN Symbol Keys
Symbol Keys for Unions

Union UN** YES UNION 127/0
81
ISOGEN Symbol Keys
Symbol Keys for Supports

01HG YES
Hanger / Support (or Blank) SUPPORT 150
ANCH YES
Support - Anchor SUPPORT 150
Support - Duck Foot DUCK YES

SUPPORT 150
Support - Guide / GUID YES

Steady SUPPORT 150
82
ISOGEN Symbol Keys

Support - Skid SKID YES SUPPORT 150
Support - Spring SPRG YES SUPPORT 150
Support - Hanger HANG YES SUPPORT 150
83
ISOGEN Symbol Keys
Symbol Keys for Valves
Plotted Flow Flow

User PCF IDF
Shape
Valve - Angle AV**

YES Y N VALVE-ANGLE 75/76
Valve – Relief/Vent AR**

angle YES Y N VALVE-ANGLE 75/76
Valve – Pressure AX**

Reducing Angle YES Y N VALVE-ANGLE 75/76
Valve – Basic VV** YES Y N VALVE 130/0
Valve – Check VC** YES Y N VALVE 130/0
Valve – Check CK** YES N Y VALVE 130/0

(alternative)
84
ISOGEN Symbol Keys
Plotted Flow Flow

User PCF IDF
Shape
Valve – Ball VB**

YES Y N VALVE 130/0
Valve – Butterfly VY** YES

Y N VALVE 130/0
Valve – Diaphragm VD** YES

Y N VALVE 130/0
Valve – Globe VG** YES

Y N VALVE 130/0
Valve – Pressure VX** YES

reducing Y Y VALVE 130/0
Valve – Cock VK** YES

Y N VALVE 130/0
85
ISOGEN Symbol Keys
Plotted Flow Flow

User PCF IDF
Shape
Valve – Gate VT** YES

Y N VALVE 130/0
Valve – Needle VN** YES

Y N VALVE 130/0
Valve – Plug VP** YES

Y N VALVE 130/0
Valve – Relief/Vent VR** YES Y N

VALVE 130/0
Valve – Slide VS** YES Y N

VALVE 130/0
86
ISOGEN Symbol Keys
Symbol Keys for 3-Way Valves

Valve – 3 Way V3** YES VALVE-3WAY 80/0/81/82/

83
87
ISOGEN Symbol Keys
Symbol Keys for 4-Way Valves

Valve – 4 Way V4** YES VALVE-4WAY 80/0/81/82/

83
88
ISOGEN Symbol Keys
Symbol Clamped Joints
Plotted Isometric User

Description SKEY Shape PCF Identification IDF Record
Shape Definable
YES CLAMP 113

Flared Clamp CLMP
YES CLAMP 113

Victaulic (Grooved pipe end CLVT
type)
YES CLAMP 113

Victaulic (Welded / Forged CLVR
ring type)
YES CLAMP 113

Compression sleeve CLCS
coupling
YES CLAMP 113

Grayloc type coupling CLGY
89
ISOGEN Symbol Keys
Symbol Liners (Connectors )

Shape Definable
Grayloc socket weld LNSW

connector
Grayloc (Female) screwed LNSC

connector
Victaulic welded ring type LVBW

(No. of welds set by Option
Switch 77 position. 7)
90
ISOGEN Symbol Keys
Symbol Couplings

Shape Definable
YES COUPLING 126

Coupling with glued end COGL
connections
YES COUPLING 126

Coupling with push fit end COPF
connections
YES COUPLING 126

Coupling with flared end COFA
connections
YES COUPLING 126

Coupling with clamped end COCL
connections
YES COUPLING 126

Coupling with Victaulic COVT
connections (grooved pipe)
91
ISOGEN Symbol Keys

Shape Definable
YES COUPLING 126

Coupling with Victaulic COVR
connections (welded
connections)
YES COUPLING 126

Coupling with compression CSCP
sleeve connections
YES COUPLING 126

Coupling with Grayloc COGY
connections
92

Isogen Symbol Key (SKEY) Definitions

Uploaded by

Copyright:

Available Formats

Isogen Symbol Key (SKEY) Definitions

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Isogen Symbol Key (SKEY) Definitions

Uploaded by

Copyright:

Available Formats

ISOGEN

Symbol Key (SKEY)

SYMBOL KEYS FOR FLANGES / BOLTED JOINTS .......................................................................................... 5

SYMBOL KEYS FOR HYGIENIC FITTINGS ...................................................................................................... 10

SYMBOL KEYS FOR MISCELLANEOUS PIPE COMPONENTS ...................................................................... 17

SYMBOL KEYS FOR MISCELLANEOUS ITEMS ............................................................................................. 21

SYMBOL KEYS FOR PENETRATION PLATE ITEMS ...................................................................................... 23

SYMBOL KEYS FOR NOZZLES ....................................................................................................................... 24

SYMBOL KEYS FOR INLINE FILTERS............................................................................................................. 25

SYMBOL KEYS FOR PIPE BLOCKS ................................................................................................................ 32

SYMBOL KEYS FOR VENTS ............................................................................................................................ 33

SYMBOL KEYS FOR TRAPS ............................................................................................................................ 34

SYMBOL KEYS FOR WELDS ........................................................................................................................... 35

SYMBOL KEYS FOR ELBOWS AND BENDS .................................................................................................. 40

SYMBOL KEYS FOR CAPS .............................................................................................................................. 53

SYMBOL KEYS FOR CROSSES....................................................................................................................... 55

SYMBOL KEYS FOR OLETS ............................................................................................................................ 60

SYMBOL KEYS FOR SPINDLES ...................................................................................................................... 63

SYMBOL KEYS FOR TEES ............................................................................................................................... 66

SYMBOL KEYS FOR REDUCERS .................................................................................................................... 72

SYMBOL KEYS FOR UNIONS .......................................................................................................................... 81

SYMBOL KEYS FOR SUPPORTS .................................................................................................................... 82

SYMBOL KEYS FOR 3-WAY VALVES ............................................................................................................. 87

SYMBOL KEYS FOR 4-WAY VALVES ............................................................................................................. 88

SYMBOL CLAMPED JOINTS ............................................................................................................................ 89

SYMBOL LINERS (CONNECTORS ) ................................................................................................................ 90

SYMBOL COUPLINGS ...................................................................................................................................... 91

Symbol Keys for Flanges / Bolted Joints

Plotted Isometric User PCF

Flange – Flared / Loose

Flange – Loose backing FLLB YES FLANGE 105

Flange – Screwed FLSC YES FLANGE 105

Plotted Isometric User PCF

Flange – Slip on with ‘J’ type

Flange – Slip on FLSO YES FLANGE 105

Flange – Orifice slip on with Tap

Flange – Socket weld FLSW YES FLANGE 105

Flange – Weld Neck FLWN YES FLANGE 105

Flange Orifice Weld neck with

Flange – Lap Joint Ring / Stub

Plotted Isometric User PCF

Cast / Lined Fixed Flange

Cast / Lined Rotating Flange FLFR YES FLANGE 105

Cast / Lined Flange – Gland YES FLANGE 105

Cast / Lined Flange – Gland YES FLANGE 105

Glued (Female) connection FLGL YES FLANGE 105

YES FLANGE 105

Seal Welded Flange (Sarlun / YES FLANGE 105

Plotted Isometric User PCF

Seal Welded Flange (Sarlun / FLSM

Symbol Keys for LJSE Type Flanges

Plotted Isometric User PCF

Lap Joint Ring FLRG YES LAPJOINT-RING 106

Lap Joint Stub End FLSE YES LAPJOINT-STUB- 106

Stub End (LJSE) – use with FLMP YES LAPJOINT-STUB- 106

Symbol Keys for Hygienic Fittings

Plotted Flow Flow PCF

Male Part Connector MPBW YES N N CONNECTOR 111

Male Part Connector MPEX YES N N CONNECTOR 111