Catalog 3105/USA Directional Control Valves

Technical Information Series DSH082 and DSH092

General Description DSH082C & DSH092C

(2)
The DSH082 and DSH092, 2-way spool valves are
used in circuits requiring flow to be blocked in both
directions and/or flow to pass in both directions. When (1)
considering this valve series, allow for normal spool DSH082N & DSH092N
valve leakage. Normally open and normally closed (2)
configuration plus manual override models are avail-
able.
(1)
Operation
In the de-energized mode, the spool is positioned by
spring force. The solenoid, when energized, directly DSH082C & DSH092C

shifts the spool against the spring, thus opening a

normally closed valve or closing a normally open
valve. Out
(1)
Features
In (2)
• High flow capacity with reduced space requirements
• Standard valve bodies and common cavities
• One-piece encapsulated coil with minimal amperage draw
Construction
• Manual overrides, seal variations and other options
available DSH082N & DSH092N

• No dynamic seals
• Variety of coil terminations
Out
(1)

In (2)

Specifications
Solenoid Coil Specifications
Rated Flow DSH082C and DSH092C
N.C. 14 LPM (3.5 GPM)
Voltage Watts Amps
DSH082N and DSH092N
N.O. 14 LPM (3.5 GPM)
10 VDC 14 1.45
Maximum Inlet 345 Bar (5000 PSI) - Steel
Pressure 210 Bar (3000 PSI) - Aluminum 12 VDC 14 1.17

Leakage 160 cc/min. (10 cu. in./min.) 24 VDC 14 0.57

maximum at 345 Bar (5000 PSI)
120 VAC 14 .144
Operating Temp. -40°C to +93.3°C (Nitrile)
Range (Ambient) (-40°F to +200°F) 240 VAC 14 .079
-31.7°C to +121.1°C (Fluorocarbon)
(-25°F to +250°F)
Response Time
Cartridge Material All parts steel. All operating (at nominal flow and maximum pressure)
parts hardened steel.
Normally Closed Open - 60 ms
Body Material Steel or Aluminum Close - 20 ms
Filtration ISO Code 16/13, Normally Open Open - 80 ms
SAE Class 4 or better Close - 40 ms

Mounting No restrictions
Wire Class “H” for all voltages
Cavity DSH082 Common Cavity No. C08-2

DSH092 Common Cavity No. C09-2 A.C. Rectifiers Integral full wave bridge

dsh082.pm6.5, bl, ll

Parker Hannifin Corporation

Hydraulic Valve Division
Hydraulics DC72 Elyria, Ohio 44035 USA
Catalog 3105/USA Directional Control Valves
Technical Information Series DSH082 and DSH092

Performance Curves
Pressure Drop vs. Flow (Through cartridge only)

PSI Bar Hydraulic Oil 135 SSU @ 100°F (28 cSt) PSI Bar Hydraulic Oil 135 SSU @ 100°F (28 cSt)
180 12 180 12

150 10 150 10

Pressure Drop (∆P)

Pressure Drop (∆P)

120 8 120 8
DSH082C
90 6 90 6
DSH092C
60 4 60 4

30 2 30 2
DSH082N DSH092N
0 0
LPM 4 8 11 15 LPM 4 8 11 15
0 0
GPM 1 2 3 4 GPM 1 2 3 4
Flow (Q) Flow (Q)

Operating Characteristics (Through cartridge only)

PSI Bar Hydraulic Oil 135 SSU @ 100°F (28 cSt) PSI Bar Hydraulic Oil 135 SSU @ 100°F (28 cSt)
6000 414 6000 414
DSH082C
5000 345 5000 345
Operating Pressure - PSI

Operating Pressure - PSI

DSH092C
4000 276 4000 276
DSH092N
3000 207 3000 207
DSH082N
2000 138 2000 138

1000 69 1000 69

0 0
LPM 4 8 11 15 LPM 4 8 11 15
0 0
GPM 1 2 3 4 GPM 1 2 3 4
Flow (Q) Flow (Q)

dsh082.pm6.5, bl, ll

Parker Hannifin Corporation

Hydraulic Valve Division
Hydraulics DC73 Elyria, Ohio 44035 USA
Catalog 3105/USA Directional Control Valves
Dimensions Series DSH082 and DSH092

*Inch equivalents for millimeter dimensions are shown in (**)

Push and Twist
Manual Override 22.9 (.90) 27.4 (1.08)
Normal Coil
Operation Overriden

Cartridge Only
42.4 1.31
2.8 (1.67) (33.3)
(.11) 3.4 N.m.
(30 In.-Lbs.)
Torque

11.5
(.45)
84.5
(3.33)

See Coil
Information 7/8 Hex.
For Terminal 31 N.m.
27.8 Connectors (275 In.-Lbs.)
(1.10) In In Torque
(2) * 3/4
16UNF-2A Thread
(2)

K (Dia.)
* For applications over 210 Bar
(3000 PSI), Thread Lock
Out (1) Compound is recommended. Out (1)

Model K (Dia.)
DSH082C & 12.6
DSH082N (.50)
DSH092C & 15.8
DSH092N (.62)

Cartridge In Body

31.8
(1.25)
14.0 44.5
(.55) (1.75)

38.1 12.7
(1.50) (.50)
44.5 25.4
(1.75) (1.00)

THIRD-ANGLE
PROJECTION

dsh082.pm6.5, bl, ll

Parker Hannifin Corporation

Hydraulic Valve Division
Hydraulics DC74 Elyria, Ohio 44035 USA
Catalog 3105/USA Directional Control Valves
Ordering Information Series DSH082 and DSH092

DSH 2
Solenoid Size Spool Style Override Seals Coil Coil Coil Body
Valve Type Option Voltage Wattage Termination Option

Code Type
Code Type
Code Style Omit Nitrile
V Fluorocarbon Omit Cartridge
08 3/4″ - 14UNF-2B Threaded without Coil
Cavity with .500″ Dia. Seat
L 14 Watt
09 3/4″ - 14UNF-2B Threaded
Cavity with .625″ Dia. Seat
Code Type

Omit Without Manual Code Description

Override
Omit Cartridge without Coil
T Push & Twist
Manual Override C 1/2″ NPTF Conduit
Code Description Connector with
24″ 18 AWG Wires
C (2)
D DIN 43650
(Hirschmann)
Code Description
(1) Plug Face
Omit Cartridge without Coil P SAE 1B-0.25 SAE
N (2)
Double Spade
D010 10 VDC
(DC Only)
D012 12 VDC
(1) W Double Wire, 24″
D024 24 VDC 18 AWG (DC Only)
A120 120/110 VAC, 60/50 Hz WP Waterproof
Double Wire, 24″
A240 240/220 VAC, 60/50 Hz 16 AWG (DC Only)

Code Port Size & Material

Omit Cartridge Only
4P 1/4″ NPTF (B**-2-4P) Steel
SERVICE PARTS
A4P 1/4″ NPTF (B**-2-A4P) Aluminum

Coil Size Coil Wattage Coil Termination Coil Voltage 6P 3/8″ NPTF (B**-2-6P) Steel
Code Size Code Type A6P 3/8″ NPTF (B**-2-A6P) Aluminum
S8 1/2″ I.D. L 14 Watts
DIN Connector: 4T SAE-4 (B**-2-4T) Steel
SW8 1/2″ I.D.
Grey — 692914 Code Description Code Description
Black — 692915 A4T SAE-4 (B**-2-A4T) Aluminum
C Conduit D010 10 VDC
Coil Nut: 6T SAE-6 (B**-2-6T) Steel
D DIN 43650 D012 12 VDC
DSH082 — 118127-00
DSH092 — 118113-00 P Double Spade D024 24 VDC A6T SAE-6 (B**-2-A6T) Aluminum
S Double Screw A120 120 VAC
Nitrile Seal Kit:
DSH082 — SK08-2 W Double Wire A240 240 VAC 4B 1/4″ BSPG (B**-2-4B) Steel
DSH092 — SK09-2 WP Waterproof A4B 1/4″ BSPG (B**-2-A4B) Aluminum
Double Wire
Fluorocarbon Seal Kit:
DSH082 — SK08-2V Notes: See Series 08 and 09 Coil Data Sheet. 6B 3/8″ BSPG (B**-2-6B) Steel
DSH092 — SK09-2V For other coil voltages and terminations, consult factory.
S8 Coil applies to all terminations except WP. A6B 3/8″ BSPG (B**-2-A6B) Aluminum
SW8 Coil applies to WP termination only.
** Specify size 08 or 09
Shipping Weight NOTE:
If system pressure does not exceed 210 Bar
Cartridge Only .11 kg (.25 lbs.) (3000 PSI), aluminum bodies can be used.
Cartridge in Body .22 kg (.50 lbs.) Higher pressures require steel bodies.

dsh082.pm6.5, bl, ll

Parker Hannifin Corporation

Hydraulic Valve Division
Hydraulics DC75 Elyria, Ohio 44035 USA