Jenway Catalogue PDF

Double Beam Spectrophotometers
Life Science Spectrophotometers
UV/Visible Spectrophotometers
pH Meters
Ion Meters
Flame Photometers
Fluorimeters
Equipment for Analysis

Dissolved Oxygen Meters
Conductivity Meters
Colourimeters
Bibby Scientific Limited
Some of the most famous names in science...
As one of the largest broad based manufacturers of benchtop

laboratory equipment worldwide, Bibby Scientific Ltd provides
internationally recognised brands with reputations for product
quality and high performance. These four famous brands are
now brought together in a single package to offer an excellent
level of quality, service and support.
A Bibby Scientific Company
Electrothermal are the newest addition to the Bibby Scientific

portfolio and are market leaders in heating mantle design and
manufacture. The extensive Electrothermal range includes
controlled, stirring, Bunsen and spill-proof mantles in various
shapes and capacities. Alongside the heating mantle range,
Electrothermal offer an extensive selection of stirrers and
melting point apparatus.
Jenway® manufactures a wide range of analytical scientific

instruments including UV/Vis spectrophotometers, flame
photometers, colorimeters, portable and laboratory meters for
the measurement of dissolved oxygen, pH, conductivity and
specific ions.
The extensive Stuart® range includes blood tube rotators,

colony counters, hotplates, hybridisation ovens, rockers,
shakers, stirrers and water purification systems.
Techne® is a world leader in the manufacture of temperature

control equipment, including water baths, Dri-Block® heaters,
and molecular biology products such as hybridisation
incubators and thermal cyclers.
http://www.bibby-scientific.com/
Page 2 Jenway Catalogue

Contents
i Introduction to Bibby Scientific

ii Contents
iii Jenway Equipment
5 Colourimeters
9 Conductivity Meters
19 Dissolved Oxygen Meters
25 Flame Photometers
29 Fluorimeters
35 Ion Meters
41 pH Meters
57 Spectrophotometers
89 Technical Information
94 Voltage Variants
97 Index by Name
100 Index by Part Code
Find out more! Please scan the QR/Mobile Tag with

your smartphone for more information
Welcome to Jenway
Welcome to the 2nd Edition of the Jenway analytical equipment
catalogue. Jenway offers an extensive range of analytical
instrumentation such as UV/visible spectrophotometers, flame
photometers, colorimeters and electrochemistry products for the
measurement of pH, conductivity, dissolved oxygen and specific
ions. In this catalogue we are very proud to introduce several new
spectrophotometers to the Jenway range:
• New 73 series spectrophotometers – entry-level

spectrophotometers which have an improved navigation system
and icon driven software for easy and intuitive usability.
• The new Genova Plus and Genova Nano life science

spectrophotometers based on the successful 73 series these
models introduce improved functionality, absorbance and purity
scanning across the whole wavelength range. As well as the
ability to pipette the sample directly onto the read head.
• New variable double beam spectrophotometer, model 6850 –

building on the success of Jenway’s first true double beam,
model 6800, this model introduces a variable spectral bandwidth
providing improved resolution.
Each section of this catalogue contains a summary page to aid

selection of the appropriate instrument to meet your needs. There
is also a frequently asked questions section at the back of the
catalogue to further aid selection. Alternatively visit www.jenway.
com/product-selector.asp and use our handy product selector tool. At
Bibby Scientific HQ we also have a technical support team available
to offer technical and application advice on the entire Jenway
product range. They can be contacted via email on jenwayhelp@
bibby-scientific.com.
Please visit www.jenway.com to download instruction manuals,

software updates, declarations of conformity and MSDS. The website
contains up-to-date product information as well as product videos
and information on news, events and exhibitions. All Jenway products
are designed, manufactured and marketed in an ISO9001:2008
environment and every step from new product development to after
sales service follows documented and traceable procedures. You can
find copies of our ISO certificate on www.jenway.com.
All electrical products produced by Bibby Scientific conform to the

latest safety directives including the European CE requirements. For
total compliance all products are tested and approved by a fully
accredited external test house. Bibby Scientific is also compliant with
the Waste Electrical and Electronic Equipment Directive (WEEE) and
the Restrictions of the use of Certain Hazardous Substances (RoHS).
The products featured in this catalogue are available through a

wide range of national and international distributors. For your local
distributor details please visit www.jenway.com/wheremap.asp. Our
aim is to provide the very best in electrochemistry and spectroscopy
instrumentation as well as the highest level of service before, during
and after the sale.

Colorimeters
The Jenway colorimeter is ideal for routine basic colour
measurements across the visible range of wavelengths from
400 to 710nm. The easy-to-use controls also makes the
colorimeter suitable for use in education.
Page 6 Bench Colorimeter

Page 7 Accessories

6051 Key Features
Colorimeter
• Wide wavelength range from 400 to 710nm
• Ideal for routine and educational use
The 6051 is a general purpose colorimeter, equipped with easy-
• Easy to use and conventional style controls
to-use conventional style controls, making it ideal for routine
• Sample flexibility with many size options
and educational use.
• Mains or battery operated
Standard 10mm square cuvettes, semi-micro volume cuvettes,

flow-through or pour in/suck out cells can all be used with
the standard sample holder. Excellent sampling flexibility
is achieved through the optional cell holder assemblies,
allowing the use of 10, 20, and 40mm cells, whilst multiple
sample handling is possible with the four cell carriage. For
temperature-dependent measurements a heated cell block is
available.
Technical Specification
Wavelength range 400 to 710nm

Wavelength selection 8 in-built gelatin filters: 430, 470,
490, 520, 540, 580, 600 and 710nm
Measurement ranges 0-100%T
0-1.50Abs
0.1 to 1000 Conc
Resolution 1%T, 0.01Abs, 0.1 to 1 Conc 6051
Bandwidth Typically 40nm Part code: 605 001
Blank drift 2%/hr after 15 minute warm-up
Photometric linearity 1%T
Light source Tungsten filament lamp
Output Analogue, 10mV per digit
Power 230V, 50Hz*
Size (l x w x d), mm 300 x 355 x 120
Weight, kg 3
Ordering Information
Part Code Description

605 001 6051 colorimeter supplied with 8 built in filters,
10x10mm cell holder, mains leads and plastic
cuvettes (230V/50Hz)
* Voltage variants available see page 94

Accessories
Colorimeter

605 003 10 x 10mm cell holder
606 017 405nm interference filter, 10nm bandwidth
606 018 540nm interference filter, 10nm bandwidth
Cells and Cuvettes

Colorimeter
Cuvettes Part Code Description
(Left to Right)
035 027 10 x 10mm glass cell
Part code: 035 086, 035 029, 035 072
060 084 10 x 10mm 3ml plastic cuvettes (pack 100)
060 087 10 x 10mm 1.5ml plastic cuvettes (pack 100)
060 422 Moulded cuvette rack for 16 10x10mm cuvettes
605 064 Tungsten filament lamp
Jenway Catalogue Page 7

Four Brands
One Name
Hundreds of Products
Bibby Scientific Ltd is one of the largest broad based
manufacturers of laboratory products worldwide.
Bibby Scientific Ltd provides internationally recognised
brands with reputations for product quality and exceptional
performance. These famous brands are now brought together
in a single package to offer an excellent level of quality, service
and support.
Stuart® Benchtop Science Equipment
Jenway® Equipment for Analysis
Techne® Equipment for the Life Sciences
Electrothermal® Equipment for

Cooling, Stirring and Heating
Find out more!!!

Please scan the QR/Mobile Tag with your
smartphone for more information

Conductivity Meters
The Jenway range of conductivity meters encompasses five
models ranging from basic portable meters, right through to
advanced combined pH and conductivity laboratory meters.
All the Jenway meters, even the basic ones have automatic
standard recognition to ensure the accuracy of results.
Additional modes of analysis such as salinity and resistivity
are available on selected models and many support GLP by
providing date stamped and downloadable results.
Page 10 Conductivity Meter Options

Page 11 Portable Conductivity/TDS Meter
Page 12 Bench Conductivity/TDS Meters
Page 14 Combined Conductivity and pH Meters
Page 16 Accessories and Consumables

Conductivity Meters Options
Select the best Conductivity Meter for you
470 4510 4520
Type Portable Bench Bench
Conductivity range 0 to1999mS 0 to1999mS 0 to 19.99S
Temperature 3 3 3
Temperature units ºC/ºF ºC/ºF ºC/ºF
TDS 3 3 3
Salinity 3 - 3
Resistivity 3 - 3
No. results stored 32 32 500
GLP support - - 3
Pure water mode - - 3
Outputs - Analogue Analogue
RS232 RS232
IrDA
Combined Conductivity and pH Meters Options

Select the best Combined Conductivity and pH Meter for you
430 3540
Type Portable Bench
Conductivity range 0 to 199.9mS 0.01μS to 1.999S
Temperature 3 3
Temperature units ºC/ºF ºC/ºF
TDS 3 3
Salinity - 3
Resistivity - 3
mV - 3
pH range 0.00 to 14.00 -2.000 to 20.000
Results storage - 250 in each mode
GLP support - 3
Pure water mode - 3
Outputs - Analogue
RS232
Page 10 Jenway Catalogue Jenway Catalogue

Key Features 470
Enterprise Conductivity/TDS Meter
• Portable conductivity and TDS meter
• Automatic range selection for The 470 hand held conductivity/TDS meter allows calibration by
optimum resolution direct cell constant entry or through the use of standard solutions.
• Automatic or manual calibration The display simultaneously shows temperature compensated
• Storage of up to 32 readings conductivity or TDS and temperature. For optimum resolution
• 500 hours battery life the best conductivity/TDS range is automatically selected, whilst
temperature compensation is achieved using an adjustable
temperature coefficient.
Conductivity
Range 6 auto-selected from 0 to 1999mS*
Resolution 0.01µS to 1mS*
Accuracy ±0.5% ±2 digits
Cell constant 0.01 to 19.99
Auto standard recognition 10µS, 84µS, 1413µS, 12.88mS
TDS
Range 6 auto selected from 0 to 1999g/l*
Resolution 0.01mg/l to 1g/l*
EC ratio 0.50 to 0.80
Temperature
Range -10 to 105°C
Resolution 0.1°C
Accuracy ±0.5°C
ATC and manual 0 to 100°C
Temperature coefficient 0.00 to 4.00%/°C
Reference temperature 18, 20, 25°C
Connector Mini DIN
Power 2AA batteries
Size (l x w x d), mm 175 x 75 x 35
470 Weight, g 250
Part code: 470 271

470 271 470 conductivity meter supplied with epoxy
conductivity cell K=1 (027 298), batteries (fitted)
and free carry case
*With K=5 cell

4510 Key Features
Bench Conductivity/TDS Meter
• Simultaneous display of conductivity or
The 4510 is easy to use but with the flexibility to meet the TDS and temperature
broadest range of applications and for those where greater • Automatic selection of range for best
accuracy is required the 4510 has automatic conductivity standard resolution
recognition and endpoint detection. Set-up options include cell • Calibration by cell constant or standard
constant, temperature coefficient and reference temperature. solutions
The instrument can store up to 32 readings, which can also be • Automatic standard recognition
sent to a printer or transferred to computer via DataWay and • Storage of up to 32 results
the RS232 interface. • Bi-directional RS232 link to printer or PC
Conductivity
Range 6 auto-selected
from 0 to 19999mS*
Resolution 0.01µS to 1mS
Automatic std. recognition 10µS, 84µS, 1413µS, 12.88mS
TDS
Range 6 auto-select from 0-19999g/l*
Resolution 0.01mg/l to 1g/l
EC Ratio 0.50 to 0.80
Temperature
Range -10 to 105°C
Resolution 0.1°C 4510
Part code: 451 001
Accuracy ±0.5°C
Temperature coefficient 0.00% to 4.00%/ºC
Reference temperature 18, 20 or 25°C
Outputs Analogue and RS232
Connector 7-pin DIN
Power 9V AC ±10% @ 50/60Hz**
Size (l x w x d), mm 210 x 250 x 55
Weight, g 850

451 001 4510 conductivity meter supplied with glass
conductivity probe with ATC (K=1) (027 013),
electrode holder (903 300) and UK power supply
(021 030)
*With K=10 cell

** Voltage variants available see page 94

Key Features 4520
• Conductivity, resistivity, TDS and salinity modes
Bench Conductivity/TDS Meter
• Special pure water mode for ultra low
conductivity measurements The 4520 is a high specification laboratory conductivity /resistivity/
• Storage of 500 results with built in data logger TDS/salinity and temperature meter that offers additional
accuracy with 1, 2 or 3 point conductivity calibration across the
• Infra-red data link (IrDA) for connection to
wide measurement range of 0 to 19.99S. The dedicated ‘pure
printer and RS232 link to connect to printer or
water’ mode ensures the optimum accuracy for this difficult
PC via DataWay software
application.
Conductivity
Range 6 auto-selected from 0 to 19.99S*
Resolution 0.01µS -0.01S
Automatic std. recognition 10µS, 84µS, 1413µS, 12.88mS
TDS
Range 6 auto selected ranges 0-1999g/l*
Resolution 0.01mg/l -1g/l
EC ratio 0.50 to 0.80
Resistivity
Range 0-20Mohm
Resolution 0.01Mohm
Salinity
Range 0-99.9g/l
Resolution 0.1g/l
4520 Accuracy 0-35 ±1g/l, 35-99.9 ±3g/l
Part code: 452 001
Temperature
Range -10 to 105°C
Resolution 0.1°C
Accuracy ±0.5°C
Temperature coefficient 0.00% to 4.00%/ºC
GLP Calibration reminder interval,
alarm outputs and security code
protected data
Outputs Analogue, RS232 and IrDA interface
Connector 7-pin DIN
Power 9V AC ±10% @ 50/60Hz**
Size (l x w x d), mm 210 x 250 x 55
Weight, g 850
*With K=10 cell
** Voltage variants available see page 94

452 001 4520 conductivity meter supplied with glass
conductivity probe with ATC (K=1) (027 013),
electrode holder (903 300) and UK power supply
(021 030)

430 Key Features
Enterprise Conductivity/pH Meter • Simultaneous display of pH, conductivity and

temperature
The easy to use 430 is designed to readily withstand the rigours • Automatic or manual calibration
of field work, while reliably measuring pH and conductivity. The • Combined pH, conductivity and temperature
unit allows the simultaneous readout of pH, conductivity or TDS probe
and temperature with switched ranges for both conductivity and • Power on self check routine
TDS measurements. • Auto-selecting ranges for both TDS and
conductivity modes
pH
Range 0.00 to 14.00 (1 or 2 point
calibration)
Resolution 0.01
Accuracy ±0.02
Auto. buffer recognition 4.00, 7.00, 9.22, 10.00
Conductivity
Ranges 5 auto-selected from
0 to 199.9mS
Resolution 0.01µS to 0.1mS
Automatic std recognition 10µS, 84µS, 1413µS, 12.88mS
(with manual override)
TDS
Range 5 auto-selected from
0 to 199.9g/l
Resolution 0.01mg/l to 0.1g/l 430
Accuracy ±0.5% ±2 digits Part code: 430 271
EC ratio (TDS) 0.50 to 0.80
Temperature
Range -9.9 to 99.9°C
Resolution 0.1°C
Accuracy ±0.5°C
ATC and manual 0 to 99.9°C
Connector mini-DIN
Power 2 AA batteries
Size (l x w x d), mm 175 x 75 x 35
Weight, g 250

430 271 430 conductivity/pH meter supplied with combined
pH/conductivity probe (430 231), buffer sachets,
batteries (fitted) and free carry case

Key Features 3540
• Simultaneous display of pH and conductivity Bench Combined Conductivity/pH Meter
• 2 independent channels to prevent
interference between probes The 3540 is ideal for use in all laboratories where pH and
• Additional modes for resistivity, salinity, TDS conductivity analyses are required. The setup menu gives quick
and mV and easy access to the whole range of instrument, pH and
• Data logger with auto save/print options conductivity measurement options. Calibration of both channels
• Storage of up to 500 readings (250 for each is automatic, with the option to select 1, 2 or 3 calibration points.
mode) The pH channel can also display mV values if required.
pH
Range -2.000 to 20.000
Resolution 0.001/0.01/0.1
Accuracy ±0.003
mV
Range ±1999.9mV
Resolution 0.1mV
Accuracy ±0.2mV
Conductivity
Range Auto-selected from 0.01µS to
1.999S
Temperature
Range -10 to 105°C
3540 Resolution 0.1ºC
Part code: 354 001
Accuracy +0.5ºC
ATC and manual 0 to 100ºC
Reference temperature 18, 20, 25°C
operator and sample ID and
security coded setup
Connectors BNC (pH) and 7-pin DIN
(conductivity)
Power 9V AC ±10% @ 50/60Hz*
Size (l x w x d), mm 210 x 250 x 55
Weight, g 850

354 001 3540 conductivity/pH meter supplied with glass
combination pH electrode (924 005), glass
conductivity probe (K=1, 027 013), electrode
stand and holder, (903 300) ATC probe (027 500),
BNC shorting plug, pH buffers and UK power
supply (021 030)

Conductivity Cells
Conductivity Accessories and Consumables
Part Code Description Unit

027 298 Epoxy bodied conductivity cell, K=1 470
027 801 Epoxy bodied conductivity cell, K=0.1 470
027 802 Epoxy bodied conductivity cell, K=10 470
924 067 Replacement pH electrode 430
430 231 Replacement combined 430
pH/conductivity probe
027 013 Glass bodied conductivity cell, K=1 Bench
027 113 Glass bodied conductivity cell, K=0.1 Bench
027 211 Glass free/epoxy conductivity cell, K=0.1 Bench
027 212 Glass free/epoxy conductivity cell, K=1 Bench
027 213 Glass free/epoxy conductivity cell, K=10 Bench
027 900 Ultra-pure water conductivity probe Bench
027 502 PTFE-coated ATC probe for use with 3540
aggressive/corrosive samples
Part code: 027 298
Part code: 027 801
Part code: 027 802
Part code: 027 113
Part code: 027 212
Part code: 027 900

Standards and Buffers
Conductivity Accessories and Consumables

025 156 12.88mS conductivity standard (500ml)
025 138 1413µS conductivity standard (500ml)
025 165 1382ppm TDS calibration standard (500ml)
025 157 200mV redox standard (500ml)
Thermal printer
025 158 300mV standard (500ml)
Part code: 037 701
025 159 465mV standard (500ml)
Printers and PC Software

Bench Meters 4510, 4520 and 3540

037 701 Thermal printer with IrDA, complete with roll of
paper (037 702), universal power adapter and
interface cable for non-IrDA instruments
050 501 DataWay PC Software: includes CD-ROM and
interface cable
037 551 RS232 to USB converter for use with computers
without serial ports
037 801 9 way serial cable for connection to PC
Miscellaneous
Carry case
Part code: 033 269

033 269 Carry case (470)
033 268 Carry case (430)
060 406 Dust cover (bench meters)
021 007 Battery (470 and 430) 2x required for each meter
903 300 Electrode stand and holder (bench meters)

Accurate,
user friendly
UV-visible
spectroscopy
Jenway’s 73 series range of spectrophotometers use icon
driven software and have an improved navigation system for
easy and intuitive usability. The basic models, 7300 and 7305
have measurement modes for photometrics and concentration;
the advanced models, 7310 and 7315 have additional measurement
modes for spectrum scanning, quantitation and kinetics.
These spectrophotometers are ideal to meet the demands of a
wide range of applications especially those in clinical, veterinary,
environmental and general QC laboratories.
This range also includes the new Genova Plus life science
spectrophotometer which is dedicated to life science analysis. This
spectrophotometer allows the measurement of DNA concentrations and
purity ratios using wavelengths recorded at 260, 280 and 230nm, with an
optional correction at 320nm. The Genova Plus is pre-programmed with
Bradford, Lowry, Biuret, BCA and Direct UV methods for protein analysis.
w w w . j e n w a y. c o m
Find out more!!!


Dissolved oxygen measurements are a standard method in
water quality analysis. As this technique is often performed
out in the field the Jenway range of dissolved oxygen (DO2)
meters includes a basic portable meter, as well as an advanced
laboratory meter. Accessories for Biological Oxygen Demand
(B.O.D) analysis are available for bench units.
Page 20 DO2 Meter Options

Page 21 Portable Dissolved Oxygen Meters
Page 22 Bench Dissolved Oxygen Meters
Page 23 Accessories

Dissolved Oxygen Meter Options
Select the best DO2 Meter for you
Jenway offer a choice between a basic portable Enterprise meter, model 970, which is ideal for use in the field; or a
bench laboratory meter which has B.O.D capabilities, model 9500.
970 9500
Type Portable Bench
DO2 ranges
% air saturation -5 to 199 0 to 199
% oxygen saturation -5 to 25 0 to 25
Concentration (mg/l) -5 to 19.99 0 to 19.99
Temperature 3 3
Atmospheric pressure correction 3 3
Salinity - -
B.O.D capability - 3
Number of results stored 32 250
GLP support - -
Outputs - Analogue
RS232
IrDA

Key Features
970
• Portable and ideal for field work
Enterprise Dissolved Oxygen Meter
• Results as % air saturation, % oxygen or mg/l
• Automatic calibration The 970 is a general purpose, hand held dissolved oxygen meter
• Manual atmospheric pressure and salinity that combines accurate measurement and ease of use in a robust,
correction ergonomic case. The display simultaneously shows % dissolved
• Storage of up to 32 results oxygen or oxygen concentration (mg/l) and temperature. All
readings are automatically corrected for temperature with the
option to manually enter corrections for pressure and salinity. The
970 is supplied with a single probe with integrated temperature
measurement, allowing automatic temperature compensation
as standard.
DO2
Ranges -5 to 199%
-5 to 25.0%
-5 to 19.99mg/l
Resolution 1%, 0.1% or 0.01mg/l
Accuracy ±2% within 10°C of calibration
temperature
Temperature
Range -10 to +60°C
Resolution 0.1°C
Accuracy ±0.5°C
ATC range 0 to +60°C
Size (l x w x d), mm 175 x 75 x 35
Weight, g 250
970
Part code: 970 271

970 271 970 dissolved oxygen meter supplied with DO2
probe (970 231B), spare membranes, KCl fill
solution, zero calibration salts, batteries (fitted)
and free carry case

9500 Key Features
Bench Dissolved Oxygen Meter • Results as % air saturation, % oxygen or mg/l

• Automatic zeroing and calibration
The 9500 is a research meter designed for use in a number • Atmospheric pressure and salinity correction
of applications including fish farming/breeding, all forms of • B.O.D5 measurement and calculation
aquaculture, environmental analysis, pollution control and • RS232 for connection to printer or PC and IrDA
effluent management. The 9500 includes powerful data logging for cableless printing option
capabilities with the ability to store 250 DO2 readings either
manually, at timed intervals or on alarmed events. The 9500 also
includes full support for the B.O.D5 day test protocol and has
the ability to store up to 20 B.O.D data sets, each with up to 10
samples.
DO2
Range 0 to 199%
0 to 25.0%
0 to 19.99mg/l
Resolution 1%, 0.1%, 0.01mg/l
Accuracy ±2% within 10°C of calibration
temperature
Temperature
Range -10 to 60°C
Resolution 0.1°C
9500
Part code: 950 001
Accuracy ±0.5°C
ATC/Manual 0 to 60°C
Other
Data Logging 250 readings storage and 20 B.O.D sets
(10 samples per set)
Clock 24 hour, hrs/min/sec or day/month/
year, leap year corrected
GLP Calibration reminder
Alarm outputs
Security code protected user data
Outputs Analogue, RS232 and IrDA
Connector 7-pin DIN
Power 9V AC ±10% @ 50/60Hz*
Size (l x w x d), mm 210 x 250 x 55
Weight, g 850

950 001 9500 dissolved oxygen meter supplied with
DO2 probe with ATC (522 023B), electrode
holder (903 300), spare membranes, KCl fill
solution, zero calibration salts, adapter bush and
UK power supply (021 030)

DO2 Probes
Dissolved Oxygen Meter Accessories
Part Code Description Unit

970 231B DO2 probe (mini-DIN connector) 970
541 520B DO2 probe with ATC (waterproof connector) 9150/9200
522 023B DO2 probe with ATC (7-pin DIN connector) 9500
Part code: 970 231B
DO2 Probe Accessories

Part Code Description Probes

522 019B Replacement membranes (3) & KCl fill solution for DO2 probe 970 231B, 522 023B, 541 520B
B.O.D Accessories
Part Code Description Probes

552 050 B.O.D kit contains bottle adapters, funnel and stirrer 522 023
552 050B B.O.D kit contains bottle adapters, funnel and stirrer 522 023B, 541 520B
Part code: 522 023B with 522 050B fitted
Jenway Catalogue Jenway Catalogue Page 23

Consumables
Dissolved Oxygen Meter Accessories

541 553 KCl fill solution for DO2 probe (30ml)
983 030 Zero calibration powder for DO2 probe (5g)

Bench Meter 9500

037 701 Thermal printer with IrDA supplied with roll of paper (037 702), universal power adapter and
interface cable for non-IrDA units (9500)
037 702 Roll of paper for thermal printer
050 501 Dataway PC software: includes CD-Rom and interface cable
Miscellaneous

033 270 Carry case (970)
060 406 Dust cover (9500)
903 300 Electrode stand and holder (9500)
021 007 Battery (970) - 2x required
Thermal printer
Part code: 037 701

Flame Photometers
Flame photometry is the only accurate analytical method
for determining certain ions concentrations and the Jenway
instruments are the ideal, low cost option for measuring
sodium, potassium, lithium, barium and calcium. Models for
clinical or industrial samples are available.
Page 26 Industrial Flame Photometer

Page 27 Clinical Flame Photometer

PFP7 Key Features
Industrial Flame Photometer • Designed for industrial analysis

• Supplied with Na, K, Li, Ba and Ca filters
The PFP7 is a low temperature, single channel flame photometer
• Low temperature, single channel
that is designed for the routine determination of sodium,
• Flame failure safety system
potassium, calcium, barium and lithium concentrations. The
• Operates with propane, butane, natural
flame failure safety system makes these products ideal for use
gas or LPG
in industrial and educational environments. The use of fine and
coarse sensitivity controls allows for accurate measurements each
and every time.
Technical Specification PFP7

Part code: 500 701
Range 0 to 199.9ppm
Limits of detection Na 0.2ppm
K 0.2ppm
Li 0.25ppm
Ca 15ppm
Ba 30ppm
Reproducibility <1% coefficient of variation for 20
consecutive samples using 10ppm Na set
to read 50
Linearity <2% error when 3ppm Na/K and 5ppm
Li are set to read 100
Stability <2% drift over 5 min when continuously
aspirating 10ppm sample set to 50.0
Specificity Interference from Na/K and Li equal in
concentration to test element
will be <0.5%
Recorder output Nominal 1.00V for a reading of 100.0
Services
Nebuliser
Electrical 90-125V or 190-250V @50/60Hz* Part code: 500 019
Air Moisture and oil free, 6 litre/min @ 14psi
Fuel Propane, butane, natural gas or LPG
Size (w x d x h), mm 420 x 360 x 300
Weight, kg 8

500 701 PFP7 industrial flame photometer supplied
with Na, K, Ba, Ca and Li filters, connecting
hoses and clips, compressor plug and drain trap
(230V/50Hz)
Note: This product will only operate with the correct type of
compressor and gas regulator as specified.

Key Features PFP7/C
• Designed for clinical analysis Clinical Flame Photometer
• Supplied with Na, K and Li filters
• Low temperature, single channel The PFP7/C is a low temperature, single channel flame photometer
• Flame failure safety system that is specifically designed for use in clinical applications for the
• Operates with propane, butane, natural gas or determination of sodium, potassium and lithium. The in-built
LPG lineariser circuitry of the PFP7/C enables readings of both sodium
and potassium to be displayed directly in mmol/l.
PFP7/C
Part code: 500 801
Range 120 to 160mmol/l Na
0 to 10.0mmol/l K
Limits of detection Na 0.2ppm
K 0.2ppm
Li 0.25ppm
Reproducibility <1% coefficient of variation for 20
consecutive samples using 10ppm Na
set to read 50
Linearity <2% error when 3ppm Na/K and
5ppm Li are set to read 100
Stability <2% drift over 5 min when
continuously aspirating 10ppm sample
set to 50.0
Specificity Interference from Na/K and Li equal in
concentration to test element will be
<0.5%
Recorder output Nominal 1.00V for a reading of 100.0
Services
Electrical 90-125V or 190-250V @50/60Hz*
Air Moisture and oil free, 6 litre/min
at 14psi
Fuel Propane, butane, natural gas or LPG
Size (w x d x h), mm 420 x 360 x 300
Weight, kg 8

500 801 PFP7/C clinical flame photometer supplied with
Na, K and Li filters, connecting hoses and clips,
compressor plug and drain trap (230V/50Hz)
Note: This product will only operate with the correct type of
compressor and gas regulator as specified.

Accessories & Consumables
Flame Photometers

535 001 Air compressor (220V/50Hz)
500 176 Water separator (small)
500 177 Water separator (large)
500 093 Fuel filter
500 178 Butane regulator
500 179 Propane regulator
500 180 Natural gas regulator
Clinical Standards (500ml) Air compressor

Part code: 535 001

025 008 1.00mmol/l Li
025 004 100mmol/l Na, 100mmol/l K
025 006 140mmol/l Na, 5mmol/l K
Industrial Standards (500ml)
Ordering Information Butane regulator

Part code: 500 178
025 021 1000ppm Na
025 023 1000ppm K
025 024 1000ppm Li
025 025 3000ppm Ba
025 009 1000ppm Ca
025 171 Cleaning solution (1 litre)
Miscellaneous
Propane regulator
Part code: 500 179

500 134 Dust cover
500 172 Minor spares kit
500 019 Nebuliser

Fluorimeters
Fluorimetry has applications in water and environmental
testing, food analysis and life science research, amongst others.
The detection of fluorescence offers one of the most sensitive
measurements in the laboratory with concentrations of less
than 1ng/ml being routinely detected.
Page 30 62 Series Fluorimeters

Page 32 Filters
Page 33 Accessories

62 Series Key Features
Fluorimeters • High quality optics: pulsed xenon lamp and

Total Energy Transfer (TET)
Three models are available to cover a wide range of applications.
• Intelligent Filter Modules ensure correct
The 6280 model is ideal for the most sensitive determinations
filters are fitted for selected method
with emission wavelengths up to 650nm. When higher emission
• Intuitive programming allows fast program
wavelengths are required the 6285 with its red-enhanced
creation
detector is the unit of choice. For less sensitive applications and a
• Raw fluorescence or concentration values
broader wavelength range up to 1100nm the low cost 6270 unit
options
is more suitable.
• Standard curve and kinetic functions
• Heated sample holder and sipper pump
With press-to-read operation and Total Energy Transfer (TET)
accessories
technology the output of the high-energy xenon lamp is
• Compatible with DataWay PC software
maximised and its expected life extended so that it should never
need replacing within the normal lifetime of the unit. The high
quality optics are complemented by the Intelligent Filter Modules
(IFM) that are identified by the unit, generating error messages
should the wrong filters be fitted or their positions be incorrect.
6280
Part code: 628 001
Each model offers intuitive operation with a user interface

based on logical menus that can be navigated from the simple
keypad. Up to 20 methods can be created without restriction and
saved for future use. They can also be locked against accidental
change by password entry. The permanent time and date tag on
every stored reading supports Good Laboratory Practice, while
calibration reminders and operator identity can also be entered
to support conformance and traceability of results.
All models are powered from an external, universal mains

adapter suitable for use from 90V to 230V.

62 Series
Fluorimeters
Parameter
Wavelength selection Intelligent Filter Modules (IFM)
Light source Pulsed Xenon lamp with press-to-read operation
Expected life of lamp No replacement required in normal operation
Raw fluorescence readings Yes
Concentration standard curve Blank and up to 6 standards
Kinetics, timed option In both raw fluorescence and concentration modes
Kinetics options 1 reading every 3 to 999 seconds
No. methods stored 20
No. results stored 100 per method
GLP support Method lock with password access
Time and date stamped results
Last calibration date and time stored
Calibration interval set and Calibration due reminder
User ID
Outputs RS232
PC software Compatible with DataWay (option)
Sample handling 10mm square cuvette holder (standard)
Heated sample holder (option)
Sipper pump (option)
Power supply 90 to 230V universal mains adapter
Size (w x d x h), mm 365 x 272 x 160
Weight, kg 6
6270 6280 6285

Wavelength range 190 to 1100nm 190 to 650nm 190 to 850nm
Sensitivity* 1µg/ml <1ng/ml <1ng/ml
Dynamic range* 5.2x104 5.2x106 5.2x106
Detector Photodiode Photomultiplier tube Photomultiplier tube
* Using quinine sulphate

627 001 6270 fluorimeter supplied with 100 disposable cuvettes (060 247) and mains adapter for use on 90 to 230V
supply with UK, Euro and US mains leads
628 001 6280 fluorimeter supplied with 100 disposable cuvettes (060 247) and mains adapter for use on 90 to 230V
628 501 6285 fluorimeter supplied with 100 disposable cuvettes and (060 247) mains adapter for use on 90 to 230V
Note: Excitation and emission filters are not included and should be purchased as separate items. Please refer to the
filter section.

Fluorimeter Filters
Fluorimeter Accessories
There are 3 types of filter for the Jenway fluorimeters. The bandpass filters are ideal as excitation filters as they allow
only the light between the specified wavelengths through to the sample. For example, UG1 allows all the light between
320 and 380nm through and excludes the light below 320nm and above 380nm. The cut-off and interference filters are
normally used as the emission filters where a much narrower range of wavelengths is required. The cut-off filters block
all light below the specified wavelength and the interference filters allow the specified wavelength and light ±5nm of
this through to the sample.

627 126 UG1, 320 to 380nm bandpass filter
627 124 BG28, 380 to 500nm bandpass filter
627 125 VG9, 480 to 580nm bandpass filter
627 131 Glass, 305nm cut-off filter
627 130 Kodak 2B, 395nm cut-off filter
627 129 Kodak 8, 475nm cut-off filter
627 128 Ilford 201, 545nm cut-off filter
627 127 Kodak 29, 610nm cut-off filter
Interference Filters
Part Code Description Part Code Description Part Code Description

627 197 214nm 627 158 370nm 627 175 540nm
627 141 250nm 627 134 380nm 627 176 546nm
627 132 254nm 627 159 390nm 627 177 550nm
627 142 260nm 627 135 400nm 627 178 560nm
627 143 265nm 627 160 405nm 627 179 570nm
627 144 270nm 627 161 410nm 627 180 577nm
627 145 280nm 627 162 415nm 627 181 580nm
627 146 290nm 627 163 420nm 627 182 590nm
627 147 295nm 627 164 430nm 627 183 600nm
627 148 300nm 627 165 436nm 627 184 610nm
627 149 305nm 627 166 440nm 627 185 620nm
627 150 310nm 627 139 450nm 627 186 630nm
627 151 313nm 627 167 460nm 627 187 633nm
627 152 320nm 627 136 470nm 627 188 640nm
627 153 326nm 627 168 480nm 627 189 650nm
627 154 330nm 627 169 490nm 627 190 656nm
627 155 334nm 627 170 500nm 627 191 660nm
627 156 337nm 627 171 510nm 627 192 670nm
627 133 340nm 627 137 515nm 627 193 680nm
627 140 350nm 627 172 520nm 627 194 690nm
627 157 360nm 627 173 530nm 627 195 694nm
627 138 365nm 627 174 532nm 627 196 700nm


Key Features Sipper Pump
• Add an air gap to separate samples
• Wash cycle The programmable peristaltic sipper pump can be adjusted
• Move sample to waste container or return to by the operator to inject a repeatable volume of sample or
original vessel standard into the chamber of a flow-through cuvette.
• Pump sample continuously for monitoring a
bulk or flowing sample Technical Specification
Continuous aspiration mode Flow rate dependant
on tubing bore: 12ml/min with
supplied tubing
Timed aspiration mode Sample/air gap/wash
Sample volume 75µl to 9.5ml
Segment run time Up to 48 seconds
Size (w x d x h), mm 205 x 190 x 160
Weight, kg 1.5

Sipper Pump 632 001 Sipper pump, supplied with inlet and outlet
Part code: 632 001
tubing (230V/50Hz)
632 031 Sipper pump, supplied with inlet and outlet
tubing (110V/60Hz)
Heated Cell System

The electrically heated cell holder with its digital control unit
ensures samples are always at the same temperature. This can
be very important as fluorescence is inversely proportional to
temperature, so care must be taken if comparing samples at
different ambient temperatures. Temperature can also affect
other sample properties, for example the rate of enzymatic
Heated Cell Controller reactions.
Part code: 633 004
Temperature range Ambient +2ºC to 60ºC
Resolution 0.1ºC
Regulation ±0.1ºC
Accuracy ±0.5ºC
Temperature control PID
Size (w x d x h), mm 205 x 165 x 85
Weight, kg 0.9kg for controller
0.4kg for heated block

628 200 Heated cell system comprising heated cell holder
(628 202), controller (633 004) and connection
leads (100 to 240V/50/60Hz)

PC Software
DataWay PC software allows unlimited storage of programs, results and graphs. It has powerful
graphing functions that allow overlays of data for comparison of results. Alternatively data can be
exported to other analysis programs such as Excel™.

050 501 DataWay software on a CD-ROM, includes spectrophotometer/fluorimeter
interface cable (013 210) and electrochemistry interface cable (013 203)
037 551 RS232 to USB convertor for connection to PC without serial ports
Cuvettes
Part Code Wavelength

035 120 100μl quartz cell (3 windows)
035 121 500μl glass cell (minimum 320nm, 4 windows with PTFE lid)
035 122 500μl quartz cell (minimum 200nm, 4 windows with PTFE lid)
060 253 10x10mm macro glass cell (UV, 4 windows)
060 254 10x10mm macro glass cell (visible, 4 windows)
060 255 Semi-micro flow cell (UV, 3 windows) fill volume 0.44ml
060 247 Pack of 100 (10mm) macro plastic (3ml) disposable cuvettes (visible, 4 windows)
Printers

037 701 Thermal printer with IrDA, complete with roll of paper (037 702),
universal power adapter
037 702 Roll of thermal paper
Miscellaneous

021 146 Xenon lamp
033 290 Fluorimeter carry case
630 028 Dust cover
Thermal printer
Part code: 037 701

Ion Meters
For some ions the only method to accurately determine low
concentrations is via an ion meter in combination with an ion-
specific electrode (ISE). Jenway offers a large selection of ISEs
and buffers to enable concentrations from as little as 1x10-9 to
9.99x109 activity to be measured.
Page 36 Portable Ion/pH Meters

Page 37 Bench Ion Meter
Page 38 Accessories
Page 39 Ion Selective Electrodes
Page 40 Consumables

3205 Key Features
Premier Portable Ion/pH Meter • Combined pH and ion portable, waterproof

meter
The 3205 portable ion meter is dedicated to the rapid, easy • Ammonium, calcium, chloride, fluoride and
and reliable determinations of ammonium, calcium, chloride, nitrate ion measurements
fluoride and nitrate ions with concentrations displayed in mg/l, • Up to 2 point pH and 5 point ion calibration
ppm, %, moles, activity or no units. When performing dedicated • Automatic buffer recognition
ion analysis appropriate ATC parameters will be automatically • 6 language options
selected and when combined with the very stable electrode
readings all calibrations can be performed in the laboratory prior
to analysis in the field. Although customised for dedicated ion
analysis the 3205 can also perform measurements of pH, mV and
other, non-dedicated ion measurements.
pH
Range -2.00 to 16.00
Resolution 0.01
Accuracy ±0.02
Auto buffer recognition 4, 7 and 10.05 (with manual
override)
Calibration User selectable 1 or 2 point
mV
Range ±1999
Resolution 1mV
Accuracy ±1mV
Temperature
Range -10 to 105°C
Resolution 0.1°C
Accuracy ±0.5°C
ATC range 0 to 100°C
Ion Multipoint calibration 1 to 5 points
Activity 1x10-9 to 9.99x109 in integer or
3205
exponential format Part code: 539 501
Concentration units activity, %, ppm, mg/l, moles, none
Dedicated ions Ammonium, Calcium, Chloride,
Fluoride and Nitrate
Clock 24 hour, hours/min/sec or day of
month, month and year. Leap year
corrected
Connector Waterproof
Power 3x AA batteries
Size (l x w x d), mm 200 x 80 x 60
Weight, g 370

539 501 3205 pH and ion meter supplied with pH/
temperature probe (027 227), buffer sachets,
waterproof connector to S7 electrode lead (013
161), waterproof connector to BNC electrode
lead and batteries

Key Features 3345
• 1 to 5 point ion calibration Bench Ion Meter
• Dual channel ion/ion or ion/pH
• Automatic temperature compensation ion and The 3345 laboratory pH/ion meter offers a host of valuable
features whilst retaining simplicity of operation through the use
pH measurements
of structured menus. The 3345 will store up to 100 readings all
• GLP support
of which can be recalled on the LCD screen or downloaded to a
• Direct potentiometry
printer or PC. Details of the last calibration results are time and
• Full support of incremental methods
date stamped, thus satisfying the requirements of GLP quality
assurance protocols. Offering flexibility with two additional
modes of ion analysis: the known addition/subtraction mode
allows the determination of ion concentrations much closer to the
lower detection limits of the electrodes, whilst multiple sample
addition/subtraction allows measurements to be performed in
dense and concentrated matrices.
pH
Calibration 1, 2 or 3 point calibration
Range -2.000 to 19.999
Resolution 0.1, 0.01, 0.001
Accuracy ±0.003
Auto buffer recognition 4, 7 and 10.05 (with manual override)
mV
3345 Range ±1999
Part code: 548 001 Resolution 0.1mV
Accuracy ±0.2mV
Temperature
Range -10 to 105°C
Resolution 0.1°C
Accuracy ±0.5°C
ATC Range 0 to 100°C
Activity 1x10-9 to 9.99x109
Concentration units Activity, %, ppm, mg/l, M or none
Clock 24 hour, leap year corrected
GLP Calibration reminder interval
(1 to 999 hrs) Timed printout interval
Connectors 2 x BNC (ion/pH), 5-pin DIN
(temperature), 2mm pin
(separate reference electrode)
Power 9V AC 230V*
Size (l x w x d), mm 275 x 240 x 150
Weight, kg 1.2

548 001 3345 dual channel ion meter supplied with glass
combination pH electrode (924 005), electrode
stand and holder, BNC to S7 connector (013 173)
for connection to ISEs, ATC probe (027 232),
buffer sachets and UK power supply

Temperature Probes and Connectors
Ion Meter Accessories

013 161 Premier to S7 leadless electrode connector
027 232 ATC/temperature probe
013 173 BNC to S7 connector
Printers

060 287 Paper roll
060 288 Printer ribbon
543 001 40 column serial printer with interface cable, paper,
ribbon and UK power adapter
Miscellaneous

544 008 Dust cover
903 300 Electrode stand and holder
Part code: 924 016
Part code: 924 017

Jenway Catalogue
Ion Selective Electrodes
A large number of standard ion selective electrodes (ISEs) are available for use with the Jenway ion meters. The
available options include easy to use combined electrodes, separate ion-specific and reference electrodes.
Ion Combination Part Code Mono Part Code Reference Electrode Part Code
Ammonia 924 328 - -
Ammonium 924 302 924 500 924 017
Barium 924 307 924 501 924 017
Bromide 924 308 924 502 924 017
Cadmium 924 309 924 503 924 017
Calcium 924 301 924 504 924 016
Carbonate 924 311 924 505 924 016
Chloride 924 304 924 506 924 017
Copper 924 313 924 507 924 017
Cyanide 924 314 924 508 924 017
Fluoride 924 305 924 509 924 016
Iodide 924 316 924 510 924 017
Lead 924 317 924 511 924 017
Mercury 924 318 924 512 924 017
Nitrate 924 300 924 513 924 017
Perchlorate 924 321 924 515 924 017
Potassium 924 322 924 516 924 017
Silver 924 323 924 517 924 017
Sodium 924 329 924 521 924 017
Sulphide 924 324 924 518 924 017
Thiocyanate 924 325 924 519 924 017
Water Hardness 924 327 924 523 924 016
Reference Electrodes for Mono ISEs

924 016 Single junction, calomel, glass bodied reference electrode
924 017 Double junction, AgCl, glass bodied reference electrode
924 036 Single junction, AgCl, glass bodied reference electrode
Note: ISEs are supplied without the connecting lead and the mono electrodes requires reference electrode to
complete the system.

Ion Selective Electrode Consumables
Ion ISAB 1000ppm 100ppm 10ppm 1ppm

Ammonium 025 129 025 120 025 143 025 142 -
Barium 025 099 025 069 - - -
Bromide 025 089 025 053 - - -
Cadmium 025 096 025 063 - - -
Calcium 025 097 025 065 025 145 025 144
Carbonate 025 132 025 126 - - -
Chloride 025 088 025 051 025 147 025 146
Cupric 025 093 025 057 - - -
Cyanide 025 091 025 134 - - -
Fluoride 025 107 025 087 025 150 025 149 025 148
Iodide 025 090 025 055 - - -
Lead 025 094 025 059 - - -
Magnesium 025 169 025 167 - - -
Mercury 025 128 025 118 - - -
Nitrate 025 098 025 067 025 152 025 151
Perchlorate 025 130 025 122 - - -
Potassium 025 127 025 073 - - -
Silver 025 095 025 061 - - -
Sodium 025 101 025 075 - - -
Sulphide 025 092 025 136 - - -
Thiocyanate 025 106 025 085 - - -
Water Hardness 025 100 025 071 - - -
Ion Selective Electrode Kits


924 402 Ammonium electrode kit comprising ammonium ISE, 1 bottle 1000ppm calibration
standard, 1 bottle ISAB and BNC to S7 lead
924 401 Calcium electrode kit comprising calcium ISE, 1 bottle of 1000ppm calibration standard,
1 bottle ISAB and BNC to S7 lead
924 404 Chloride electrode kit comprising chloride ISE, 1 bottle of 1000ppm calibration standard,
924 405 Fluoride electrode kit comprising fluoride ISE, 1 bottle of 1000ppm calibration standard,
924 400 Nitrate electrode kit comprising nitrate ISE, 1 bottle of 1000ppm calibration standard,
Note: Some ISE consumables may be subject to a minimum order quantity.

pH Meters
The Jenway pH meters range from basic portable units, right
through to advanced combined pH and conductivity laboratory
meters. All models, except the 3505 which is specifically
designed for use in education have automatic standard
recognition to ensure the accuracy of the results. Redox and
ion concentration modes are available on some of the models.
Page 42 pH Meter Options

Page 43 Portable pH/mV Meters
Page 45 Portable Ion/pH Meter
Page 46 Bench pH Meters
Page 49 Combined Conductivity/pH Meters
Page 51 pH Electrodes

pH Meter Options
Select the best pH Meter for you
350 370 3205 3505 3510 3520
Type Portable Portable Portable Bench Bench Bench
Waterproof - - 3 - - -
pH range -2 to 16 -2 to 16 -2 to 16 -2 to 16 -2 to 20 -2 to 20
mV - 3 3 3 3 3
Redox - 3 3 3 3 3
Ion - 3 3 - - -
ATC - 3 3 - 3 3
No. calibration 1 or 2 1 or 2 1 or 2 - 1, 2 or 3 1, 2 or 3
Automatic buffer 3 3 3 - 3 3
recognition
Results stored 32 32 100 - 32 500
GLP support - - 3 - - 3
Combined pH and Conductivity Meters

Select the best combined pH and Conductivity Meter for you
430 3540
Type Portable Bench
Conductivity range 0 to 199.9mS 0.01μS to 1.999S
Temperature 3 3
TDS 3 3
Salinity - 3
Resistivity - 3
mV - 3
pH range 0.00 to 14.00 -2.000 to 20.000
Results storage - 250 in each mode
GLP support - 3
Pure water mode - 3
Outputs - Analogue
RS232

Key Features 350
• Simultaneous pH and temperature display Enterprise pH Meter
• Storage of up to 32 results
• Automatic or manual calibration 500 hours The 350 is a general purpose portable pH meter offering 1 or
battery life 2 point pH calibration and automatic buffer recognition with
• Application specific electrodes and manual override. It simultaneously displays both the temperature
consumables compensated pH readings and the manually set temperature.
pH
Range -2.00 to 16.00
Resolution 0.01
Accuracy ±0.02
Manual temperature range 0 to 100°C
Automatic buffer recognition 4.00, 7.00, 9.22, 10.00 (with
manual override)
Connector BNC
Battery life 500 hours typical
Size (l x w x d), mm 175 x 75 x 35
Weight, g 250

350 350 271 350 pH meter supplied with epoxy bodied
Part code: 350 271 combination electrode (924 001), pH buffer
sachets, batteries (fitted) and free carry case

370 Key Features
Enterprise Portable pH/mV Meter • pH, absolute and relative mV ranges

• Automatic or manual calibration
The 370 hand held pH/mV meter offers simple, yet professional • Automatic or manual temperature
performance with 1 or 2 point calibration and automatic buffer compensation
recognition with manual override. The unit simultaneously • Simultaneous pH and temperature reading
displays temperature compensated pH readings or electrode • Storage of up to 32 results
potential and temperature.
A comprehensive range of application specific electrodes and

consumables are available for use with the 370 meter.
pH
Range -2.00 to 16.00
Resolution 0.01
Accuracy ±0.02
Automatic buffer recognition 4.00, 7.00, 9.22, 10.00 (with
manual override)
mV (absolute or relative)
Range ±1999mV
Resolution 1mV
Accuracy ±1mV

Temperature
Range -10 to +105°C
Resolution 0.1°C
Accuracy ±0.5°C
ATC/Manual range 0 to 100°C
Connector BNC
Battery life 500 hours typical
Size (l x w x d), mm 175 x 75 x 35 370
Weight, g 250 Part code: 370 271

370 271 370 pH/mV meter supplied with epoxy bodied
combination electrode (924 001), ATC probe
(027 500), pH buffer sachets, batteries (fitted)
and free carry case

Key Features 3205
• Combined pH and ion portable, waterproof Premier Portable Ion/pH Meter
meter
• Ammonium, calcium, chloride, fluoride and The 3205 portable ion meter is dedicated to the rapid, easy
nitrate ion measurements and reliable determinations of ammonium, calcium, chloride,
• Up to 2 point pH and 5 point ion calibration fluoride and nitrate ions with concentrations displayed in mg/l,
• Automatic buffer recognition ppm, %, moles, activity or no units. When performing dedicated
• 6 language options ion analysis appropriate ATC parameters will be automatically
selected and when combined with the very stable electrode
readings all calibrations can be performed in the laboratory prior
to analysis in the field. Although customised for dedicated ion
analysis the 3205 can also perform measurements of pH, mV and
other, non-dedicated ion measurements.
pH
Range -2.00 to 16.00
Resolution 0.01
Accuracy ±0.02
Auto buffer recognition 4, 7 and 10.05 (with manual override)
mV
Range ±1999
Resolution 1mV
Accuracy ±1mV
Temperature
Range -10 to 105°C
Resolution 0.1°C
Accuracy ±0.5°C
3205
Part code: 539 501 Activity 1x10-9 to 9.99x109 in integer or
exponential format
Concentration units activity, %, ppm, mg/l, moles, none
Dedicated ions Ammonium, Calcium, Chloride,
Fluoride and Nitrate
Clock 24 hour, hours/min/sec or day
of month, month and year. Leap year
corrected
Connector Waterproof
Size (l x w x d) mm 200 x 80 x 60
Weight, g 370

539 501 3205 pH and ion meter supplied with
pH/temperature probe (027 227), buffer sachets,
waterproof connector to S7 electrode lead (013
161), waterproof connector to BNC electrode
lead and batteries

3505 Key Features
Bench pH Meter • Intuitive operation via rotary controls

• pH, temperature and mV mode for redox
The 3505 is a simple to use laboratory pH, mV and temperature and electrode diagnosis
meter for use in general purpose and educational applications. It • Calibration controls locked during
utilises rotary controls for mode selection and pH calibration. A measurement
novel design feature ensures that inadvertent movement of the ª Manual or automatic temperature
calibration controls has no effect during sample measurement. compensation
The large display ensures that during demonstrations and when • Large display
used by groups, all can easily see the clear LCD readout. • Battery or mains operated
pH
Range -2.00 to +16.00
Resolution 0.01
Accuracy ±0.02
mV
Range ±1999mV
Resolution 1mV
Accuracy ±1mV
Temperature
Range -10 to +105°C
Resolution 0.1°C
Accuracy ±0.5°C 3505
Part code: 350 501
Connector BNC
Power 9V PP3 battery as standard
or optional 9V power supply
Size (l x w x d), mm 210 x 250 x 55
Weight, g 850

350 501 3505 pH meter supplied with epoxy combination
pH electrode (924 001), electrode stand and
holder (903 300), ATC probe (027 500), BNC
shorting plug, buffer sachets and battery
021 030 Optional mains power supply

Key Features 3510
• Simultaneous readout of pH and temperature Bench pH/mV Meter
• pH resolution to 3 decimal places
• 1, 2 or 3 point calibration The 3510 is a versatile, simple to use pH, mV and temperature
• Automatic or manual buffer selection meter that is ideal for routine analysis. With up to three decimal
• Storage of up to 32 results place resolution and a choice of up to three calibration points
• RS232 connection to printer or PC via the 3510 provides the user with added flexibility where future
DataWay demands for enhanced performance may be required. A choice
of pH calibration buffers to DIN, JIS and NIST standards can be
used for automatic calibration, as well as manually entered
buffer values.
pH
Range -2.000 to +19.999
Accuracy ±0.003
Calibration User selectable 1, 2 or 3 point
Automatic buffer recognition Jenway (2.00, 4.00, 7.00, 9.20
and 10.00), DIN, NIST, JIS
mV
Range ±1999.9mV
Resolution 0.1/1mV
Accuracy ±0.2mV
3510 Temperature
Part code: 351 001
Range -10 to 105°C
Resolution 0.1°C
Accuracy ±0.5°C
ATC and manual temperature 0 to 100°C
compensation
Connector BNC
Power 9V AC ±10% @ 50/60Hz•
Size (l x w x h), mm 210 x 250 x 55
Weight, g 850

351 001 3510 pH/mV meter supplied with glass
stand and holder (903 300), ATC probe (027 500),
BNC shorting plug, pH 4, 7 and 10 buffers and
UK power supply (021 030)

3520 Key Features
Bench pH Meter • Ideal for quality control and GLP applications

• Up to 3 decimal place resolution
The 3520 dynamic pH/mV meter offers research grade • 1, 2 or 3 point pH calibration
specifications with a comprehensive range of features and • Automatic or manual buffer selection
functions, making it suitable for the broadest range of research, • Multiple language options
general laboratory, QC and GLP based applications. The built • Storage of up to 500 results
in data logger can store, print or output readings based on a • RS232 connection to printer or PC or
wide range of trigger options, making this model suitable for infra red (IrDA) communication
monitoring and controlling pH levels. • GLP support
pH
Range -2.000 to +20.000
Accuracy ±0.003
Calibration User selectable 1, 2 or 3 point
Auto buffer recognition Jenway (2.00, 4.00, 7.00, 9.20
and 10.00), DIN, NIST, JIS
mV
Range ±1999.9mV
Resolution 0.1/1mV
Accuracy ±0.2mV
Temperature
3520
Range -10 to 105°C Part code: 352 001
Resolution 0.1°C
Accuracy ±0.5°C
ATC and manual temperature 0 to 100°C
correction
Alarm points -2.000 to 19.999pH
GLP Calibration reminder interval
(1 to 999hrs) Alarm outputs
(open collector and audible).
Security code protected data
Outputs Analogue, RS232 and IrDA
Connector BNC
Power 9V AC ±10% @ 50/60Hz*
Size (l x w x h), mm 210 x 250 x 55
Weight, g 850

352 001 3520 pH/mV meter supplied with glass
BNC shorting plug, pH 4, 7 and 10 buffer sachets
and UK power supply

Key Features 430
• Simultaneous display of pH, conductivity and Enterprise Conductivity/pH Meter
temperature
• Automatic or manual calibration The easy to use 430 is designed to readily withstand the rigours
• Combined pH, conductivity and temperature of field work, while reliably measuring pH and conductivity. The
probe unit allows the simultaneous readout of pH, conductivity or TDS
• Power on self check routine and temperature with switched ranges for both conductivity and
• Auto-selecting ranges for both TDS and TDS measurements.
conductivity modes
pH
Range 0.00 to 14.00 (1 or 2 point
calibration)
Resolution 0.01
Accuracy ±0.02
Auto. buffer recognition 4.00, 7.00, 9.22, 10.00
Conductivity
Ranges 5 auto-selected from 0 to
199.9mS
Resolution 0.01µS to 0.1mS
Automatic std recognition 10µS, 84µS, 1413µS, 12.88mS
(with manual override)
TDS
430
Range 5 auto-selected from 0 to
Part code: 430 271
199.9g/l
Resolution 0.01mg/l to 0.1g/l
EC ratio (TDS) 0.50 to 0.80
Temperature
Range -9.9 to 99.9°C
Resolution 0.1°C
Accuracy ±0.5°C
ATC and manual 0 to 99.9°C
Connector mini-DIN
Size (l x w x d), mm 175 x 75 x 35
Weight, g 250

430 271 430 conductivity/pH meter supplied with
combined pH/conductivity probe (430 231),
buffer sachets, batteries (fitted) and free carry
case

3540 Key Features
Bench Combined Conductivity/pH Meter • Simultaneous display of pH and conductivity

• 2 independent channels to prevent
The 3540 is ideal for use in all laboratories where pH and interference between probes
conductivity analyses are required. The setup menu gives quick • Additional modes for resistivity, salinity, TDS
and easy access to the whole range of instrument, pH and and mV
conductivity measurement options. Calibration of both channels • Data logger with auto save/print options
is automatic, with the option to select 1, 2 or 3 calibration points. • Storage of up to 500 readings (250 for each
The pH channel can also display mV values if required. mode)
pH
Range -2.000 to 20.000
Accuracy ±0.003
mV
Range ±1999.9mV
Resolution 0.1mV
Accuracy ±0.2mV
Conductivity
Range Auto-selected from 0.01µS to 1.999S
Temperature
3540
Part code: 354 001
Range -10 to 105°C
Resolution 0.1ºC
Accuracy ±0.5ºC
ATC and manual 0 to 100ºC
operator and sample ID and security
coded setup
Connectors BNC (pH) and 7-pin DIN (conductivity)
Power 9V AC ±10% @ 50/60Hz*
Size (l x w x d), mm 210 x 250 x 55
Weight, g 850

354 001 3540 conductivity/pH meter supplied with glass
combination pH electrode (924 005), glass
conductivity probe (K=1, 027 013), electrode
BNC shorting plug, pH buffers and UK power
supply (021 030)

Key Features pH Performance Electrodes
• Quickly reach equilibrium pH Meter Accessories
• Significantly reduced response times
• Far greater reproducibility The advanced Jenway Performance pH electrodes are the
• Significantly reduced long-term drift electrodes of choice for advanced applications where faster
response times and greater reproducibility are required.
924 904 924 905

Beer 3 3
pH electrode Blood products 3 3
Part code: 924 904
Cement Q 3
Cosmetics 3 3
Dairy products 3 3
Education Q 3
Fats/cream Q
Field use Q
Fish products Q Q
High accuracy laboratories 3 3
Low ionic 3
pH electrode
Micro samples 3
Part code: 924 905
Soil Q Q
Test tubes Q
Tris Buffer 3 3
3 Electrode recommended for this sample type

Q Electrode would be satisfactory for use with this
sample type

If the box is left blank this indicates that the electrode
is not suitable for this application

924 904 4.5mm semi-micro, 90mm reach, glass bodied
for small volume liquid samples, Tris buffers and
use in high accuracy laboratories (max.
temperature 100ºC)
924 905 General purpose, glass bodied for measurements
in general solutions, Tris buffers and use in high
accuracy laboratories (max. temperature 100ºC)

Combination pH Electrodes
pH Meter Accessories

924 001 General purpose, epoxy bodied for standard measurements of general solutions (max.
temperature 60ºC)
924 067 Replacement pH electrode with S7 connector (430, max. temperature 60ºC)
924 002 12mm stem spear type, glass bodied for measurement of soil and slurry samples
924 003 Redox (platinum), glass bodied for redox measurements
924 005 General purpose, glass bodied for standard measurements of general solutions
924 007 4.5mm semi-micro, 90mm reach, glass bodied for small volume liquid samples
924 010 Spear type, 6mm stem, glass bodied for small volume soil and slurry samples
924 078 350mm reach probe, glass bodied for measurement in flasks
924 015 Glass electrode, pH only requires separate reference electrode
924 047 3 in 1 pH/temperature, epoxy bodied (bench laboratory meters only, max. temperature 100ºC)
924 070 3 in 1 combination pH/temperature, epoxy bodied (370, 3505, 3510, 3520, 3540 maximum
temperature 100ºC)
Application Specific Electrodes

924 049 Life science, 6mm micro, 150mm reach, glass bodied for test tubes and small sample volumes
(maximum temperature 100ºC)
924 030 Tris buffer, semi-micro with 90mm reach, glass bodied for pH measurements in biological buffers,
blood and protein samples (maximum temperature 50ºC)
924 050 Environmental, glass bodied, suitable for low ionic strength solutions and purified water
924 068 Environmental pH electrode with S7 connector (430, max. temperature 50ºC)
924 051 Food, epoxy bodied, flat membrane, ideal for measurements of food extracts and agar plates
924 069 Food pH electrode with S7 connector (430, maximum temperature 60ºC)
924 077 Jam electrode, epoxy bodied, ideal for measurements of jam and preserves
924 034 Spear knife probe, epoxy based for the measurement of solid samples
924 035 Replacement electrode for spear knife probe
924 076 Difficult applications, glass bodied for measurement of oils, biofuels and non-aqueous samples
924 079 High temperature probe, glass bodied for measurements up to 110°C
924 080 Laboratory electrode, glass bodied for measurement of aggressive chemical solutions

pH Electrodes
Part code: 924 001
Part code: 924 015
Part code: 924 070
Part code: 924 030
Part code: 924 051
Part code: 924 077
Part code: 924 076
Part code: 924 080
Waterproof Versions (Premier models)

027 227 Waterproof, general purpose, epoxy-bodied with ATC (max. temperature 100ºC)
924 052 Waterproof environmental with ATC (max. temperature 50ºC)
924 053 Waterproof 12mm stem spear type, glass bodied with ATC
924 054 Waterproof redox (platinum), glass bodied for redox measurements with ATC
924 055 Waterproof Tris buffer, glass bodied for pH measurements in biological buffers, blood and protein
samples with ATC (max. temperature 50ºC)
924 056 Waterproof food pH electrode with ATC (max. temperature 60ºC)
538 014 Adapter lead with waterproof connector to BNC electrode connector

Temperature and Reference Electrodes

027 500 ATC/temperature probe (370, 3505, 3510, 3520 and 3540)
027 502 PTFE-coated ATC probe for use with aggressive/ corrosive samples (370, 3505, 3510, 3520 and 3540)
924 016 Single junction, calomel, glass bodied reference electrode (max. temperature 50ºC) (3205)
924 017 Double junction, AgCl, glass bodied reference electrode (max. temperature 50ºC) (3205)
924 036 Single junction, AgCl, glass bodied reference electrode (max. temperature 100ºC) (3205)
Part code: 027 500
Part code: 924 016
Part code: 924 017
Part code: 924 036

037 701 Thermal printer with IrDA, complete with roll of paper (037 702), universal power adapter and interface
cable for non-IrDA instruments
037 702 Roll of paper for thermal printer
050 501 DataWay PC Software: includes CD-ROM and interface cable
037 551 RS232 to USB converter for use with computers without serial ports
037 801 9 way serial cable for connection to PC
Thermal printer
Part code: 037 701

Buffers and Solutions

025 037 pH 4 buffer (red, 500ml)
025 038 pH 7 buffer (yellow, 500ml)
025 039 pH 10 buffer (clear, 500ml)
025 162 pH 9.22 buffer (500ml)
025 163 pH 2 buffer (500ml)
025 179 pH 4 buffer sachets (pack of 10)
025 192 pH electrode storage solution (250ml)
025 196 pH electrode fill solution 3M KCl, AgCl saturated (150ml)
025 197 4M KCl/AgCl partial gel (150ml)
025 160 3M KCl pH fill solution (150ml)
025 161 pH electrode cleaning solution (500ml)
025 157 Redox standard (200mV) (500ml)
Miscellaneous

033 267 Carry case (350)
033 268 Carry case (370 and 430)
033 162 Carry case (3205)
060 406 Dust cover for bench units
021 008 Battery (3505)
021 007 Battery (350, 370 and 430) two batteries required
903 300 Electrode stand and holder

pH Electrodes
For more help selecting the correct electrode for your 3 Recommended for application
application please contact jenwayhelp@bibby-scientific.com
Q Suitable for application
924 001
027 227
924 067
924 002
924 005
924 003
924 007
924 010
924 015
924 030
924 034
924 047
924 070
924 049
924 050
924 052
924 051
924 076
924 077
924 078
924 079
924 080
Agar 3
Alkalines (high) 3 3 3
Beer 3 3 3 3 3 3 3 3 3 3 3 3 3
Blood products Q 3 3 3 Q Q 3 Q 3 3 Q 3 3 3
Bread/dough 3 3 3 Q
Cement Q Q 3 Q Q Q Q Q Q Q 3 Q 3 3 Q
Cosmetics 3 Q 3 3 Q Q Q Q 3 3 3 3 3 3 3 Q
Dairy products Q Q 3 3 3 Q 3 3 3 3 Q 3 3 Q
Drinking water Q Q Q Q Q 3 Q Q Q Q
Education 3 Q 3
3 Q Q Q 3 3 3 Q Q 3 3 3 3 3
Fats/cream Q Q 3 3 Q
Q Q Q Q Q Q Q Q
Field use 3 3 Q 3 3 3 Q 3 Q Q Q
Fish products Q Q Q Q 3 3 Q
Q Q 3 Q Q Q Q Q
High temperature 3 3
Jam/preserves 3 Q
Lab environmental Q 3
Lab flasks 3 3
Low ionic 3 Q Q 3 3 3 3
Meat/cheese Q 3 3
Micro samples 3 Q Q Q Q Q
Paint 3 3 3 3 3
Photographic 3 3
Soil Q 3 Q Q 3 Q 3 Q Q Q Q Q Q Q
Surface 3
Test tubes Q 3 3 Q
Tris buffer 3 3 Q
Viscous samples Q Q Q 3 Q

Spectrophotometers
UV-visible spectroscopy is the measurement of the absorbance
of light at a specific wavelength by a sample within the UV
or visible region of the spectrum. Spectroscopy is one of the
most established analytical techniques used to identify the
presence and concentration of many molecular entities. As
spectrophotometers are used in many applications and across
multiple industries Jenway have four Spectrophotometer
ranges designed to suit a wide range of budgets.
Page 58 Selecting a Spectrophotometer

Page 60 Visible and UV/Visible Spectrophotometers
Page 68 Life Science Spectrophotometer
Page 70 Micro-Volume Spectrophotometer
Page 74 Visible and UV/Visible Scanning
Spectrophotometers
Page 78 UV/Visible Double Beam Spectrophotometer
Page 80 Cuvettes
Page 82 TrayCell
Page 83 Enviromental Test Kits

Welcome to the range
Jenway offer four ranges of visible and UV/visible spectrophotometers, which have been designed to suit a wide
range of budgets, industries and applications.
The 63 series are basic single beam entry-level spectrophotometers including the 6300 and 6305, which have
measurement modes for absorbance, transmittance and concentration, and are ideal for routine analysis. The 63
series spectrophotometers are covered by a 3 year warranty.
The 73 series spectrophotometers are single beam spectrophotometers which use icon driven software and have
an improved navigation system. The 7305 and 7315 models use a press to read xenon lamp to provide accurate
readings and extend lamp life. The 7310 and 7315 introduce scanning to this range and include measurements
modes for photometrics, concentration, spectrum scanning, quantitation and kinetics. This range also includes the
Genova Plus and Genova Nano Spectrophotometers which are dedicated to life science analysis. The whole range is
covered by a 3 year warranty including the xenon lamp.
The 67 series spectrophotometers are a range of split beam visible and UV/visible spectrophotometers that possess
a host of novel features. These include a colour touch screen, secure multi-user operation, a full range of plug-in
accessory modules and flash synchronised scanning which allows the 67 series to achieve scan speeds of 1500nm/min,
even when scanning at a resolution of 0.1nm. The 67 series spectrophotometers are covered by a 3 year warranty
including the xenon lamp.
The new 6850 is a UV/visible double beam spectrophotometer with a variable spectral bandwidth. This
spectrophotometer has an integrated user interface for local control and ease of navigation. The 6850 is ideal for
quality control, general research, pharmaceutical, biochemical and clinical laboratory applications. This model is
covered by a 1 year warranty.
For more help selecting a spectrophotometer refer to page 92 or contact jenwayhelp@bibby-scientific.com
Selecting a Spectrophotometer
Model Visible UV Scanning Single Split Double Bandwidth

beam beam beam
6300 3 - - 3 - - 8nm
6305 3 3 - 3 - - 8nm
7300 3 - - 3 - - 5nm
7305 3 3 - 3 - - 5nm
7310 3 - 3 3 - - 5nm
7315 3 3 3 3 - - 5nm
Genova Plus 3 3 3 3 - - 5nm
Genova Nano 3 3 3 3 - - 5nm
6700 3 - 3 - 3 - 4nm
6705 3 3 3 - 3 - 4nm
6715 3 3 3 - 3 - 1.5nm
6850 3 3 3 - - 3 0.5, 1, 2, 4, 5nm

Visible Spectrophotometers
Selecting a Visible Spectrophotometer
6300 7300 7310 6700

Wavelength
Range 320 to 1000nm 320 to 1000nm 320 to 1000nm 320 to 1100nm
Bandwidth 8nm 5nm 5nm 4nm
Modes
Photometrics 3 3 3 3
Concentration 3 3 3 3
Spectrum scan - - 3 3
Kinetics - - 3 3
Quantitation - - 3 3
Multi-wavelength - - - 3
Data
Post-scan analysis - - 3 3
File output - - csv csv or bmp
Removable media - - USB SD
PC Software 3 3 3 3
Interface Analogue Analogue Analogue Analogue
RS232 RS232 RS232 Centronics
USB
Selecting a UV/Visible Spectrophotometer
6305 7305 7315 6705 6715 6850
Wavelength
Range (nm) 198 to 1000 198 to 1000 198 to 1000 190 to 1100 190 to 1100 190 to 1100
Bandwidth 8nm 5nm 5nm 4nm 1.5nm 0.5, 1, 2, 4, 5nm
Modes
Photometrics 3 3 3 3 3 3
Concentration 3 3 3 3 3 3
Spectrum scan - - 3 3 3 3
Kinetics - - 3 3 3 3
Quantitation - - 3 3 3 3
Multi-wavelength - - - 3 3 3
Data
Post-scan analysis - - 3 3 3 3
File output - - csv csv or bmp csv or bmp -
Removable media - - USB SD SD -
PC Software 3 3 3 3 3 3
Interface Analogue Analogue Analogue Analogue Analogue RS232
RS232 RS232 RS232 Centronics Centronics USB
USB

6300 and 6320D Key Features
Visible Spectrophotometers • Wavelength range of 320 to 1000nm

• Absorbance, %T and concentration modes
The 6300 is a high quality, low cost unit for spectrophotometric • Multi-parameter display with wavelength
applications in schools and colleges, as well as in QC and testing and photometric readouts
procedures for a wide variety of services and industries. The • Wide range of sampling accessories
6320D is based on the 6300 platform and includes a domed lid • Domed lid of 6320D accepts tubes up to
which accepts taller tubes up to a height of 105mm. 105mm tall
• 3 year warranty
Wavelength
Range 320 to 1000nm
Resolution 1nm
Accuracy ±2nm
Spectral bandwidth 8nm
Photometrics
Transmittance 0 to 199.9%T
Absorbance -0.300 to 1.999A
Accuracy ±1%T 6300
Resolution 0.1%T, 0.001A Part code: 630 501
Stray light <0.5%T
Noise <1%
Stability 1%/h after 15 minutes
Concentration
Range -300 to 1999
Resolution 0.1 to 1
Units ppm, mg/l, g/l, M, %, blank
Factor 0 to 199.9, 1000 to 9999
Other
Light source Tungsten halogen lamp
Power <50W*
Size (w x d x h), mm 365 x 272 x 160
Weight, kg 6
6320
Part code: 632 501

630 501 6300 visible spectrophotometer supplied with
mains lead, pack 100 disposable cuvettes, 10 x
10mm cell holder, interface cable and 63-Zero
PC application software on CD-ROM** (230V/50Hz)
632 501 6320D visible spectrophotometer supplied with
mains lead and dual cell holder (for 10mm square
cuvettes and 12.7mm diameter tubes) (230V/50Hz)

** Requires free on-line registration

Key Features 6305
• Wavelength range of 198 to 1000nm UV/Visible Spectrophotometer
• Xenon lamp
• Easy and intuitive operation The 6305 is ideal for applications similar to the 6300 requiring
• Absorbance, %T and concentration modes measurements in the UV and visible wavelength ranges. Using a
• Multi-parameter display with wavelength and single, pulsed xenon lamp the 6305 offers an extended lamp life
photometric readouts and high energy throughput in the UV and visible regions.
• Wide range of sampling accessories
• 3 year warranty Technical Specification
Wavelength
Range 198 to 1000nm
Resolution 1nm
Accuracy ±2nm
Spectral bandwidth 8nm, 6nm over UV range
Photometrics
Accuracy ±1%T
Resolution 0.1%T, 0.001A
Stray light <0.5%T at 220 and 340nm
6305 Noise <0.001A at 0A at 400nm
Part code: 635 001 Stability <0.002A/h after 30 minutes
Concentration
Range -300 to 1999
Resolution 0.1 to 1
Units ppm, mg/l, g/l, M, %, blank
Factor 0 to 199.9, 1000 to 9999
Other
Light source Xenon lamp
Power <50W*
Size (w x d x h), mm 365 x 272 x 160
Weight, kg 6

635 001 6305 UV/Visible spectrophotometer supplied
with mains lead, pack 100 disposable cuvettes,
10x10mm cell holder, interface cable and 63-
Zero PC application software on CD-ROM**
(230/50Hz)

** Requires free on-line registration

63 Series Accessories Key Features
63 Series Spectrophotometer • Water and electrically heated cuvette

holders
The 63 series has been specifically designed to enable a wide • Adjustable path length cuvette holder
range of accessories to be easily fitted and used. To increase • 4 position cuvette holder
productivity Jenway offer a four position rotary cuvette holder • Test tube holders
(part code 634 001). To accommodate various sample volumes • Sipper pump
there are a wide range of passive accessories available including
an adjustable cuvette holder which can hold cuvettes between
10 and 100mm; a test tube holder for test tubes with diameters
between 16 and 24mm; and for small sample volumes there is a
micro-cuvette holder with a reduced aperture.
Where temperature control is important Jenway offer a water

heated cuvette option (part code 648 001) which requires a water
bath and circulator (not supplied). For reproducible samples
volumes Jenway offer an external sipper pump system (part
code 632 001) which can be programmed to deliver controlled
Part code: 630 204
and reproducible sample volumes into the chamber of a flow
through cuvette along with air and segmentation rinse cycles.
Ordering Information Part code: 630 005

630 204 10mm path length cuvette holder
630 005 10 to 100mm path length cuvette holder
634 001 4 position manual cuvette holder
630 304 Micro-cuvette holder with reduced aperture
632 511 Dual cell holder for 10mm cuvettes and 12.7mm
diameter tubes (for use with 6320D only)
637 071 10mm cuvette and 16/24mm test tube holder
636 024 Cuvette holder adapter (7.5 to 15mm beam
height)
648 001 Water heated single cuvette holder
Printers
Part code: 637 071


037 551 RS232 to USB converter for use with computers
without a serial port
543 001 40 column printer supplied with interface cable,
paper roll and ribbon and UK power adapter
060 287 Paper roll for printer
060 288 Printer ribbon
542 009 Interface cable kit

Key Features Sipper Pump
• Reproducible sample volumes
• Wash cycle
• Move sample to waste container or return to The programmable peristaltic sipper pump can be adjusted
original vessel by the operator to inject a repeatable volume of sample or
• Pump sample continuously for monitoring a standard into the chamber of a flow-through cuvette.
bulk or flowing sample
Continuous aspiration mode Flow rate dependant on tubing

bore: 12ml/min with supplied
tubing
Timed aspiration mode Sample/air gap/wash
Sample volume 75µl to 9.5ml
Segment run time Up to 48 seconds
Size (w x d x h) 205 x 190 x 160mm
Weight 1.5kg
Part code: 632 001

tubing (230V/50Hz)
Part code: 634 001
tubing (110V/60Hz)
Miscellaneous

630 028 Dust cover
033 290 Storage/carry case (not for use with 6320D)
012 094 Xenon lamp module (6305/6315)
012 075 Tungsten halogen lamp (6300/6320D/6310/
Aquanova)

7300 Key Features
Visible Spectrophotometer • Wavelength range 320 to 1000nm

• 5nm spectral bandwidth
The 7300 spectrophotometer uses icon driven software and has • Icon driven software
an improved navigation system for easy and intuitive usability. • Small footprint
This instrument has measurement modes for absorbance, % • Autologging capabilities
transmittance and concentration. The 7300 is easy to use and is • 3 year warranty
ideal for use in education and general QC laboratories.
Wavelength
Range 320 to 1000nm
Resolution 1nm
Accuracy ±2nm
Spectral Bandwidth 5nm
Photometrics
Absorbance Range -0.300 to 2.500A
Transmittance Range 0 to 199.9%T
Photometric Accuracy ±1%T, ±0.01A at 1.000 Absorbance
Concentration
Range -300 to 9999
Resolution Selectable 1/0.1/0.01/0.001
Units no units, %, ppm, EBC, SRM, mEq/l,
mEq, M, mM, µM, nM, U, U/l, U/ml, 7300
g/l, mg/l, µg/l, ng/l, g/dl, mg/dl, µg/dl, Part code: 730 001
mg/ml, µg/ml, ng/ml, µg/µl, ng/µl,
mol/l, mmol/l
Factor 0.001 to 10000
Standard 0.001 to 1000
Calibration Blank with a single standard or factor
Other
Light Source Tungsten halogen lamp
Outputs Analogue, RS232, Internal printer
Size (w x d x h), mm 275 X 400 X 220
Weight, kg 6

730 001 7300 Visible spectrophotometer fitted with a
single 10x10mm cuvette holder and supplied
with 100 disposable cuvettes, instruction manual,
universal power supply, PC software on CD ROM
and interface cable.

Key Features 7305
• Wavelength range 198 to 1000nm UV/Visible Spectrophotometer
• 5nm spectral bandwidth
• Icon driven software The 7305 spectrophotometer uses icon driven software and has
• Press to read xenon lamp an improved navigation system for easy and intuitive usability.
• Small footprint This instrument has measurement modes for absorbance,
• Autologging capabilities % transmittance and concentration. The 7305 is ideal for
• 3 year warranty including xenon lamp applications similar to the 7300 which require measurements in
the UV range of the spectrum.
Wavelength
Range 198 to 1000nm
Resolution 1nm
Accuracy ±2nm
Photometrics
Concentration
Range -300 to 9999
7305 Units no units, %, ppm, EBC, SRM,
Part code: 730 501 mEq/l, mEq, M, mM, µM, nM, U,
U/l, U/ml, g/l, mg/l, µg/l, ng/l, g/
dl, mg/dl, µg/dl, mg/ml, µg/ml,
ng/ml, µg/µl, ng/µl, mol/l, mmol/l
Factor 0.001 to 10000
Other
Light Source Xenon lamp
Outputs Analogue, RS232, Internal printer
Size (w x d x h), mm 275 X 400 X 220
Weight, kg 6

730 501 7305 UV/Visible spectrophotometer fitted with a
single 10x10mm cuvette holder and supplied
with 100 disposable cuvettes, instruction manual,
universal power supply, PC software on CD ROM
and interface cable.

7310 Key Features
Visible Scanning Spectrophotometer • Spectrum scanning across entire

range from 320 to 1000nm
The 7310 uses icon driven software and has an improved navigation system • 5nm spectral bandwidth
for easy and intuitive usability. This spectrophotometer builds on the 7300 • Icon driven software
platform with additional measurement modes for spectrum scanning,
• Small footprint
kinetics and quantitation. The 7310 is ideal for routine testing in clinical,
• Autologging capabilities
veterinary, pharmaceutical and QC laboratories.
• Internal method storage
• Results and method saving to
USB memory stick
• 3 year warranty
Wavelength
Range 320 to 1000nm
Resolution 1nm
Accuracy ±2nm
Photometrics
Concentration/Quantitation
Range -300 to 9999
Factor 0.001 to 10000
Concentration Calibration Blank with a single standard or factor
Quantitation Calibration Blank with up to 6 standards
Quantitation Curve Fit Quadratic, quadratic through zero, linear, 7310
linear through zero, interpolate Part code: 731 001
Kinetics
Measurement time 2 to 9999 seconds
Kinetics Calibration Blank with a single standard or factor
Kinetics Display Graphical and concentration value
Analysis Concentration, rate of change, initial and
final absorbance or %transmittance
Spectrum
Scan Interval 1, 2 or 5nm
Analysis Absorbance or %transmittance and peak and
valleys
Other
Method storage 240
Results storage Limited by USB memory stick
GLP Real time clock & calendar, operator ID
Light Source Tungsten halogen lamp
Outputs USB, Analogue, RS232, Internal printer
Size (w x d x h), mm 275 x 400 x 220
Weight, kg 6

731 001 7310 Visible scanning spectrophotometer fitted with a single
10x10mm cuvette holder and supplied with 100 disposable
cuvettes, 4GB USB memory stick, instruction manual, universal
power supply, PC software on CD ROM and interface cable.

Jenway Catalogue
Key Features 7315
• Spectrum scanning across entire UV/Visible Scanning Spectrophotometer
range from 198 to 1000nm
• 5nm spectral bandwidth The 7315 spectrophotometer uses icon driven software and has an improved
• Press to read xenon lamp navigation system for easy and intuitive usability. This instrument is an
advanced spectrophotometer with measurement modes for photometrics,
• Icon driven software
concentration, spectrum scanning, quantitation and kinetics. This model
• Small footprint
will meet the demands of a wide range of applications especially those in
• Autologging capabilities
clinical, veterinary, environmental and general QC laboratories.
• Internal method storage
• Save results and methods to USB
memory stick
• 3 year warranty including xenon lamp Wavelength
Range 198 to 1000nm
Resolution 1nm
Accuracy ±2nm
Photometrics
Range -300 to 9999
Factor 0.001 to 10000
7315 Quantitation Calibration Blank with up to 6 standards
Part code: 731 501 Quantitation Curve Fit Quadratic, quadratic through zero,
linear, linear through zero, interpolate
Kinetics
Measurement time 2 to 9999 seconds
Kinetics Calibration Blank with a single standard or factor
Kinetics Display Graphical and concentration value
Analysis Concentration, rate of change, initial and
final absorbance or %transmittance
Spectrum
Scan Interval 1, 2 or 5nm
Analysis Absorbance or %transmittance and
peak and valleys
Other
Method storage 240
Results storage Limited by USB memory stick
GLP Real time clock & calendar, operator ID
Outputs USB, Analogue, RS232, Internal printer
Size (w x d x h), mm 275 x 400 x 220
Weight, kg 6
731 501 7315 UV/Visible scanning spectrophotometer fitted with a
single 10x10mm cuvette holder and supplied with 100 disposable
cuvettes, 4GB USB memory stick, instruction manual, universal
power supply, PC software on CD ROM and interface cable.
Jenway Catalogue
Genova Plus Key Features
Life Sciences Spectrophotometer • Pre-programmed methods for DNA/RNA

analysis
The new Genova Plus is a UV/visible spectrophotometer
• Purity scan across entire wavelength range
dedicated to life science analysis. This spectrophotometer is
• Pre-programmed methods for protein
based on the successful 73 series spectrophotometers therefore
analysis
it has all of the same features including icon driven software and
• Standard spectrophotometer functions
an improved navigation system for easy and intuitive usability.
• Press to read xenon lamp
The Genova Plus has pre-programmed methods for the • Icon driven software
measurement of nucleic acid concentrations and protein assays. • Small footprint
This spectrophotometer also has measurement modes for the • Method and result saving to USB
purity of nucleic acids and optical density for cell harvesting. memory stick
• 3 year warranty including xenon lamp
As well as the dedicated life science measurement modes
this versatile instrument can also be used as a standard
spectrophotometer with measurement modes for photometrics,
concentration, multi-wavelength, spectrum scanning,
quantitation and kinetics.
The Genova Plus is pre-programmed with methods for the

measurement of ssDNA, dsDNA, RNA and oligonucleotide
concentrations using wavelengths recorded at 260, 280
and 230nm, with an optional correction at 320nm. This
measurement mode has the 260/280 and 260/230
ratios pre-programmed as well as a variable ratio
option which enables up to 3 wavelengths to be
entered as well as the correction wavelength.
A dilution option is also available to calculate
the original concentration of diluted samples.
For measuring protein concentrations the

Genova Plus is pre-programmed with methods
for Bradford, Lowry, Biuret, Bicinchoninic Acid
(BCA) and Direct UV assays. This measurement
Genova Plus
mode allows up to 12 standards, with 3 replicates of each
Part code: 736 501
standard, to be measured to create the standard curve.
Bacterial cell cultures are routinely grown until the optical

density at 600nm reaches approximately 0.4, which indicates the
optimum cell number for harvesting. This measurement mode
enables cell growth to be monitored by measuring absorbance.
Measurements can be performed at 600nm, 595nm or any other
user selected wavelength.
The Genova Plus also enables scanning across the full wavelength
range from 198 to 1000nm enabling the purity of nucleic acids
to be determined. The multi-wavelength measurement mode
allows the sample to be measured at 4 different wavelengths,
with ratio calculations and formulae with various factors to
calculate concentration.

Genova Plus
Life Sciences Spectrophotometer
Wavelength
Range 198 to 1000nm
Resolution 1nm
Accuracy ±2nm
Repeatability ±0.5nm
Photometrics
Photometric Accuracy ±1%T, ±0.01A at 1.000 Absorbance*
Range 0 to 9999
Quantitation Calibration Blank with up to 12 standards
Quantitation Curve Fit Quadratic, quadratic through zero, linear, linear through zero, interpolate
Multi-wavelength
Data Points Up to 4 wavelengths
Calculations Ratio, difference, sum, product
Kinetics
Measurement Time 2 to 9999 seconds
Display Graphical & calculated concentration value
Analysis Concentration, rate of change, initial and final absorbance or % transmittance
Spectrum/Purity Scan
Scan Data Interval 1, 2 or 5nm
Analysis Absorbance or % transmittance and peaks and valleys
DNA
Measurement modes dsDNA, ssDNA, RNA, Oligonucleotides,260/280, 260/230, Variable Ratio
Protein
Measurement modes BCA, Bradford, Lowry, Biuret, Direct UV
OD 600
Range 0.00 E-19 to 9.99 E+19
Units cells/ml
Factor 0.01 E-19 to 9.99E+19
Standard 0.01 E-19 to 9.99E+19
Other
Method Storage 312 (including pre-programmed methods)
Results Storage Limited by USB memory stick
GLP Support Real time clock & calendar, user ID
Removable Media USB (supplied)
Outputs USB, Analogue, RS232, Integral printer
Size (w x d x h), mm 275 x 400 x 220
Weight, kg 6
* Assessment must be performed with a 10 x 10mm path length cuvette holder fitted

736 501 Genova Plus UV/visible scanning spectrophotometer fitted with micro-cuvette holder, supplied
with 10x10mm cuvette holder, pack 100 disposable micro-cuvettes, 4GB USB memory stick,
instruction manual and universal power supply.

Genova Nano Key Features
Micro-volume Spectrophotometer • 3 in 1 spectrophotometer

• Ideal for DNA, RNA and Protein measurements
The new Genova Nano spectrophotometer has all the
• Eliminates the need for micro-volume cuvettes
same features and benefits of the Genova Plus life science
• Only 0.5µl sample volume required
spectrophotometer with the addition of the micro-volume
• Conserves precious samples
accessory making it even more versatile. This spectrophotometer
• Easy and quick to clean
is very simple and quick to use and its ability to measure sample
• Fast measurement time
volumes as low as 0.5µl conserves precious samples, reduces the
need for dilutions and eliminates the requirement for cuvettes. • Detects DNA concentrations as low as 2ng/µl
• Method and result saving to USB memory stick
The Genova Nano measures small sample volumes with a high • 3 year warranty including Xenon lamp
degree of accuracy and reproducibility in less than 6.5 seconds.
Its stainless steel read head with an embedded quartz lens,
utilizes the natural surface tension of the droplet to form the
bond between the read head surfaces. Cleaning is quick and
simple; wiping the read heads with a microfiber cloth removes
all trace of the sample, allowing faster change over between
samples and therefore increasing sample throughput.
In line with the Genova Plus, the Genova Nano has pre-
programmed methods for the measurement of nucleic acid
concentrations and protein assays as well as measurement
modes to assess the purity of nucleic acids and optical
density for cell harvesting. With pre-programmed
methods for the measurement of ssDNA, dsDNA,
RNA and oligonucleotide concentrations as well
as Bradford, Lowry, Biuret, BCA and Direct UV
methods for protein analysis.
As well as the dedicated life science

measurement modes this versatile
instrument can also be used as a standard
spectrophotometer with measurement
modes for photometrics, concentration,
Genova Nano
multi-wavelength, spectrum scanning, quantitation and
Part code: 737 501
kinetics.
The 3 in 1 ability of the Genova Nano to be used as a life science

spectrophotometer, a standard spectrophotometer and a micro-
volume spectrophotometer all in one package means it can
meet the requirements of any busy laboratory.

Genova Nano
Micro-volume Spectrophotometer
Wavelength
Wavelength Range 198 to 1000nm
Wavelength Accuracy ±2nm
Path Length 0.2 or 0.5mm (auto-ranging)
Photometrics
Absorbance Range 15 to 125A (10mm equivalent)
Absorbance Accuracy ±2% at 260nm
Absorbance Precision <0.005A between 0 and 1A (at 260nm and 0.5mm)
Maximum Concentration 6,000 ng/µl (dsDNA) (at 0.2mm)
Detection Limit 2ng/µl (dsDNA) (at 0.5mm)
Measurement Time <6.5 seconds
Minimum Sample Size 0.5µl (at 0.2mm) 1.0µl (at 0.5mm)
Maximum Sample Size 5µl
DNA measurement modes dsDNA, ssDNA, RNA, Oligonucleotides, 260/280, 260/230, Variable ratio
Protein measurement modes BCA, Bradford, Lowry, Biuret, Direct UV
Other
Sample Pedestal Material Quartz stainless steel
Light Source Press to read Xenon lamp
Size (w x d x h), mm 275 x 400 x 220
Weight, kg 7.7
When the 10x10mm cuvette accessory is fitted the spectrophotometer conforms

to the Genova Plus technical specification – see page 69 for details.

737 501 Genova Nano micro-volume scanning spectrophotometer fitted
with micro-cuvette accessory, supplied with 10x10mm cuvette
holder, 4GB USB memory stick, instruction manual and
universal power supply.

73 Series Accessories Key Features
73 Series Spectrophotometer • Multiple sample measurement

• Reproducible sample volumes
The 73 series has been designed to enhance productivity by • Temperature control
offering an extensive range of accessories. Available active • Instant results
accessories include an automated 8 position cuvette holder, • Variable sample volumes
sipper pump, Peltier and a combined sipper Peltier. A full range
of passive accessories can also be fitted including adjustable
path length (10 to 100mm) cuvette holders, single water heated
cuvette holders, test tube holders and micro-cuvette holders.
As the new Genova Plus and Genova Nano spectrophotometers

are based on the 73 series range all of the accessories which are
available for the 73 series spectrophotometers can be used with
the Genova Plus and Genova Nano. The only exception is the
boiling tube holder - this cannot be used with the Genova Plus
or Genova Nano spectrophotometers.
Automatic 8 Position Cuvette Holder

Part code: 735 401
To increase productivity and throughput rate there is an

automated 8 position cuvette holder for multiple sample
measurement. The automated cuvette holder accepts standard
10x10mm path length cuvettes. Part code: 735 401
Temperature Control
For applications where the temperature of the sample needs to
be controlled Jenway offer two options. The first is an electronic
Peltier accessory which enables sample temperature to be
controlled between 20°C to 50°C. Part code: 735 301
The second option is a single water heated cuvette holder

Part code: 735 201
which requires a circulating water bath and has an operating
temperature range of 5°C to 50°C. Part code: 736 201
Sipper Pump
For safe and effective sample handling Jenway offer a sipper
pump which circulates samples and can be programmed to
deliver reproducible sample volumes. A flow through cuvette
must be used with the sipper pump. Part code: 735 201
Part code: 735 301

Combined Sipper Peltier
The combined sipper Peltier pump combines the functionality
of both the sipper pump and the Peltier enabling sample
temperature to be controlled while the sample is being circulated.
Part code: 735 701

Passive Accessories
Part code: 735 901
73 Series Accessories
Jenway also offer an extensive range of passive accessories to

use with the 73 series spectrophotometers. For cuvettes with
a variable path length between 10 and 100mm we offer an
adjustable path length cuvette holder. Part code: 630 005
For small sample volumes down to 50µl we offer a micro-cuvette

holder. Part code: 630 304
For large sample volumes we offer a test tube holder which can
hold test tubes up to 100mm in height with diameters of 13, 16
and 24mm Part code: 637 071. Jenway also offer a boiling tube
holder which can hold boiling tubes up to 150mm in height with
a diameter of 25mm. Part code: 735 601
Printers
For instant results Jenway offer a printer which can be easily
fitted into the top of the spectrophotometer to save bench space.
The integrated printer enables spectrum and kinetics curves to
Part code: 736 001
be printed as well as results tables and analysis summary. The
user name and method parameters are printed on all results.
Part code: 660 101

Part code: 736 201
660 101 Internal printer (packed)
735 401 Automatic 8 position cuvette holder
735 201 Sipper pump
735 301 Peltier
735 701 Combined sipper/Peltier
630 204 10x10mm path length cuvette holder
637 071 16/24mm test tube holder
736 201 Water heated 10x10mm path length cuvette holder
735 601 Boiling tube holder
735 001 Dust cover
019 146 4GB USB Memory stick for external memory
Part code: 660 101
(7310/7315 only)
012 075 Tungsten halogen lamp (7300/7310)

67 Series Key Features
Visible and UV/Visible Scanning Spectrophotometers • Colour touch screen display
• High quality, sealed split beam optics for
All three instruments have modes for photometrics, spectrum optimum photometric performance
scanning, multi-wavelength analysis, kinetics and quantitation, • Secure multi-user operation
giving direct concentration results against single or multi-point • Save to SD memory card
calibrations. With extensive post measurement tools to ensure • Enhanced productivity
results are presented exactly to each user’s requirements the 67 • Extensive range of accessories for
series also offers significant advances in data portability. Together, flexibility and improve productivity
the touch screen and colour display give the fastest, most flexible • 3 year warranty including xenon lamp
instrument interface possible. Where fine cursor control is
required, using the QWheel™ makes the task easy and precise.
Jenway have developed secure multi-user operation for when

instruments are shared by a number of users, so access to the
instrument functions is controlled through a secure log-in
procedure. For maximum security PIN codes can be allocated
to individuals, groups or departments and to further increase
flexibility each method can be given three levels of security:
Public Access is free to all users.

Read only Methods can be accessed by all users, 67 Series
but only modified by the originator. Part code: 670 0B0
Personal Method can only be accessed
by the logged in user
The spectrophotometer’s internal memory can be copied to

the removable SD card which enables easy cloning of multiple
instruments, ensuring common laboratory practice and speeding
set-up in busy teaching establishments.
Data can be transferred from the spectrophotometers using the

removable SD card or via direct transfer, using the USB port, to
a PC. Using the PC software provided the data can be viewed,
exported, saved or printed.
The 67 series spectrophotometers are very versatile and flexible

instruments with an extensive range of accessories which have
been specifically designed to be easily interchangeable.
QWheel is a registered trademark of Quantum Research

67 Series
Visible and UV/Visible Scanning Spectrophotometers
Wavelength
Range 320 to 1100nm (6700) 190 to 1100nm (6705, 6715)
Spectral bandwidth 4nm (6700, 6705) 1.5nm (6715)
Resolution 0.1nm
Accuracy ±1.0nm
Repeatability ±0.2nm
Photometrics
Accuracy ±0.005A at 1.0A
Stability <0.001A/h after warm-up
Stray light <0.1%T at 340nm (6700) <0.05% at 220nm (6705, 6715)
Quantitation
Range -99999 to +99999
Calibration Up to 20 standards with 5 replicates of each
Units mEq/l, ppm, mg/l, g/l, %, µg/ml, mg/ml, g/dl, mg/dl, µg/l, ng/l, µg/dl, M, mM, µM, U/l, mU/l,
U/ml, blank
Curve fit algorithms Linear, quadratic and cubic functions
Multi-wavelength
Data points Up to 4 wavelengths
Calculations Ratio, difference, formulae with factors
Kinetics
Time limits 0 to 9999 seconds
Calibration Standard or factor
Analysis Curve details with mean rate of change plus formula of line of best fit
Spectrum
Range Any range between 320 (6700) or 190 (6705, 6715) and 1100nm
Scan speed 1500nm/min
Scan interval 0.1nm
Analysis Auto peaks and valleys, zoom, addition, subtraction, peak ratios, smoothing, area under
curve, wavelength table, derivatives, analysis points, overlay
Other
Light source Tungsten halogen lamp (6700)
Xenon lamp (6705, 6715)
Configuration Secure multi-user and free access
Number of users 10 users + supervisor
Methods/results memory >500 on internal flash memory or removable media
Removable media SD memory card
Outputs USB, Centronics, Analogue, Internal printer
Size (w x d x h), mm 490 x 390 x 220
Weight, kg 7.5
NOTE: All 67 Series spectrophotometers are supplied with 2GB of internal memory, 2GB SD memory card, 100 disposable cuvettes, instruction manual,
power cable and PC software on CD ROM with interface cable.

670 0B0 6700 Visible Scanning Spectrophotometer fitted with a single 10 x 10mm cuvette holder
670 5B0 6705 UV/Visible Scanning Spectrophotometer fitted with a single 10 x 10mm cuvette holder
671 5B0 6715 UV/Visible Scanning Spectrophotometer fitted with a single 10 x 10mm cuvette holder

The 67 series spectrophotometers are very versatile and flexible

instruments with an extensive range of accessories available which
have been specifically designed to be easily interchangeable. All
three models are fitted with a single 10x10mm cuvette holder as
standard therefore the required accessories must be purchased
separately.
The active accessories include an 8-cell automatic turret, 6-cell

water heated automatic turret, sipper pump, Peltier and
combined sipper/Peltier and are supplied in a sample chamber
which can be easily fitted into place without the requirement of
any tools. When the active accessories are fitted the instrument
automatically detects which accessory has been fitted when
performing its warm up checks.
The passive accessories include an adjustable path length cuvette 67 Series

holder for cuvettes with a variable path length between 10 and Part code: 630 204 (Fitted as standard)
100mm, a micro-cuvette holder for small sample volumes and
a test tube holder. There is also a single water heated cuvette
holder for temperature control. Please note that a water bath
and circulator are required for this accessory but not supplied.
Peltier Controlled Cuvette Holder

The Peltier controlled cuvette holder allows precise control of
sample temperature in the range of 20 to 50°C to a resolution of
0.1°C. Part code: 660 301
Programmable Sipper Pump

A programmable sipper pump can also be fitted, enabling
controlled sample volumes to be injected into micro and standard
flow-through cuvettes. Air segmentation and rinse cycles can also
be programmed for sensitive applications. Part code: 660 201
Peltier Sipper Pump

For sensitive applications a combined Peltier sipper module is
also available. This accessory incorporates the the features and
functions of both the Peltier and sipper pump. Part code 660 701
Six and Eight Position Cell Holders

The automated eight and six-position cell holder accessories
are the key to improved productivity in all modes of operation. 67 Series
Both accept standard 10mm path-length cuvettes while the six- Part code: 660 201, 660 401
position accessory has the added benefit of a water jacket for (Sold separately)
sample temperature control via an external circulating water
bath. Part code 660 501. When using the eight position cell
holder the dedicated automated option enables up to 7 samples
to be measured sequentially with all results saved or printed
automatically. Part code 660 401

Visible and UV/Visible Scanning Spectrophotometer Accessories
Cell Holders
660 401 Sample chamber with automatic eight-cell changer module fitted
660 403 Additional carousel for automatic eight-cell changer
(for use with 660 401)
630 204 10mm path length cuvette holder
637 071 10mm cuvette and 16/24mm test tube holder
Heated cell and Sipper Pump

660 501 Sample chamber with water heated automatic six-cell changer module fitted
660 503 Additional carousel for water heated automatic
six-cell changer (for use with 660 501)
660 201 Sample chamber with sipper module fitted
660 301 Sample chamber with Peltier module fitted
660 701 Sample chamber with sipper/Peltier module fitted
661 201 Single cell sample chamber module fitted with water heated cuvette holder (648 001)*
* Circulating water bath required but not supplied
Printers
660 101 Internal printer (packed)
037 702 Paper roll for thermal printer
019 133 2GB SD card for external memory
Miscellaneous

660 001 Dust cover
060 422 Moulded cuvette rack for 16 10x10mm cuvettes
035 088 Visible range calibration standards (all models)
035 091 UV/Visible calibration standards (6705/6715)
012 075 Tungsten halogen lamp (6700)

6850 Key Features
UV/Visible Double Beam Spectrophotometer • Double beam spectrophotometer with highly

stable optics
The new 6850 introduces the first double beam • Variable spectral bandwidth 0.5, 1, 2, 4, 5nm
spectrophotometer with a variable spectral bandwidth into • Integrated user interface
the Jenway range. The highly stable optics and two detectors • Conforms to European Pharmacopeia
measure the sample and reference simultaneously optimising requirements
measurement accuracy. The 6850 has measurement modes • Jenway Prism PC software included as
for photometrics, concentration, multi-wavelength, spectrum standard
scanning, kinetics, quantitation, DNA/RNA and protein analysis. • Extensive range of accessories available
Jenway Prism PC software is supplied as standard and offers

additional functionality with preloaded methods for DNA/RNA
and protein analysis, as well as extensive post-measurement
tools, unlimited results saving and easy export of data.
The 6850 is ideal for quality control, general research,

pharmaceutical, biochemical and clinical laboratory applications.

685-SC 6850 double beam spectrophotometer, supplied
fitted with single 10x10mm cuvette holder in
sample and reference position, instruction
6850
manual, power cables, PC software on CD ROM
Part code: 685-SC
with USB connection cable and dongle, 2 x quartz
cuvettes, 4 x glass cuvettes and FREE dust cover

685 204 10x10mm path length cuvette holder
685 131 Water heated 10x10mm single cell holder
685 304 Micro-cuvette holder
685 401 8 position automatic cell changer
Eight cell changer

Part code: 685 401

6850
UV/Visible Double Beam Spectrophotometer
Wavelength
Wavelength resolution 0.1nm
Wavelength accuracy ± 0.3nm (at 0.5 and 1nm bandwidth)
± 0.5nm (at 2, 4 and 5nm bandwidth)
Wavelength reproducibility ±0.2nm
Spectral bandwidth Variable 0.5, 1, 2, 4, 5nm
Photometrics
Photometric range –0.3 to 3.0A
0 to 200%T
Photometric accuracy ± 0.002A (0-0.5A)
±0.3%T (0-100%T)
Photometric reproducibility ±0.001 Abs (0 to 0.5 Abs)
±0.002 Abs (0.5 to 1.0 Abs)
0.15%T (0-100%T)
Stray light <0.05%T at 220 and 360nm
Noise 0.0005A
Stability ± 0.001A/h at 500nm after 15 min warm up
Multi-Wavelength
Multi–wavelength Up to 10 wavelengths, up to 20 wavelengths with PC software
Spectrum
Spectrum range Any range between 190 and 1100nm
Scan speed 100 to 2000nm/min
Scan interval 0.1, 0.2, 0.5, 1, 2 or 5nm
Analysis Auto peaks and valleys, zoom, addition, subtraction, peak ratios, smoothing, area
under curve, wavelength table, derivatives, overlay with PC software
Kinetics
Kinetics Up to 12 hours with time intervals of 0.1, 0.2, 0.5, 1, 2, 5, 10 or 30 seconds
Quantitation/Concentration
Quantitation points Up to 3 wavelengths
Quantitation Calibration Blank with up to 10 standards or factor
Concentration range 0–99999
Calibration Blank with standards or factor
DNA
DNA/RNA and Protein DNA/RNA Ratio, concentration, A320 correction
Other
Light source Tungsten halogen and Deuterium lamps
Lamp changeover 325 to 370nm selectable
Outputs USB and parallel
Operating system: Windows 2000, XP, Vista, Windows 7
Electrical supply 120VA, 220/110V, 50/60Hz
Size (w x d x h), mm 600 x 450 x 200
Weight, kg 22

Cuvettes
Spectrophotometer Accessories
Jenway offer a range of glass and quartz cuvettes as well as disposable plastic cuvettes. The glass and quartz cuvettes
are available in a range of path lengths from 10 to 100mm. Jenway also offer a range of glass and quartz flow-
through and micro-volume cuvettes. Glass cuvettes are suitable for measurements in the visible region whereas quartz
cuvettes may be used in both the UV region and visible region.
Disposable Cuvettes
Visible UV/Visible
Part Code Material Description wavelength wavelengths Fill volume
060 084 Plastic Pack of 100 plastic cuvettes 3 - 2.4 to 4.5ml
060 230 Plastic Pack of 100 plastic cuvettes, 3 3 2.5 to 4.5ml
060 232 Plastic Pack of 500 plastic cuvettes, 3 3 2.5 to 4.5ml
060 231 Plastic Pack of 100 UV plastic cuvettes, 3 3 1.5 to 3.0ml
035 143 Plastic Pack of 100 plastic cuvettes, UV 3 3 70µl to 1.5ml
Glass Cuvettes
Visible UV/Visible
Part Code Material Description wavelength wavelengths Path length Fill volume
035 027 Glass 10mm path length cuvette 3 - 10mm 2.0 to 3.5ml
035 086 Glass 20mm path length cuvette 3 - 20mm Up to 7.0ml
035 123 Glass Micro (500µl) cuvette 3 - 10mm 500µl
035 126 Glass Semi-micro (1ml) cuvette 3 - 10mm 1ml

Flow Cells
Visible UV/Visible
035 045 Glass Flow-through cell 3 - 10mm 80µl
035 044 Quartz Flow-through cell 3 3 10mm 1.8ml
035 047 Quartz Flow-through cell 3 3 10mm 80µl
Quartz Cuvettes
Visible UV/Visible
035 028 Quartz 10mm path length cuvette 3 3 10mm 2.0 to 3.5ml
035 056 Quartz 20mm path length cuvette 3 3 20mm Up to 7.0ml
035 124 Quartz UV ultra micro (50µl) cuvette 3 3 10mm 50µl
035 125 Quartz UV micro (500µl) cuvette 3 3 10mm 500µl
035 127 Quartz UV semi-micro (1ml) cuvette 3 3 10mm 1ml
035 138 Quartz UV ultra-micro (100µl) cuvette 3 3 10mm 100µl

TrayCell
• Ideal for DNA, RNA and protein measurements
• Sample volumes as low as 0.7µl
• Sample concentration range from 25 to 4250μg/ml
• Sample is simply wiped away after the measurements, TrayCell
making the TrayCell quick and easy to use Part code: 035 262
• Prevents dilution and pipetting errors
• Fits all standard 10 x 10mm cuvette holders
The TrayCell is a fibre optic cuvette which can be used with as

little as 0.7µl of sample. The cuvette has two caps which give
path lengths of either 1mm or 0.2mm, thus creating a ‘virtual
dilution’ of 1:10 or 1:50 of the sample when compared to a
measurement with a standard 10 mm cuvette
Light Path 0.2mm or 1mm

Error of light path ± 0.02mm
Volume 0.7-5μl
Maximum temperature 50°C Cap
Mirror
Ordering Information Light Path
Window
035 262 TrayCell for ultra-micro sample volumes from
0.7 to 5μl compatible with Genova Plus, 6705
Light beam
and 6715 spectrophotometers, supplied
complete with caps for 1mm and 0.2mm path
length operation
035 263 Replacement 1mm path length cap for TrayCell Detector
Source
035 264 Replacement 0.2mm path length cap for TrayCell Cell

Environmental Test Kits
Jenway environmental test kits offer the simplest and most convenient
laboratory system for measuring a broad range of parameters in water,
wastewater, effluent and environmental samples. Jenway environmental
test kits contain 25, 50 or 100 tests (depending upon test kit).
Part Code Description Range No. of tests Vials Required Vial Part Code
025 300 Alkalinity m 5 - 200mg/l CaCO3 100 24mm 060 425
025 301 Alkalinity p 5 - 300mg/l CaCO3 100 24mm 060 425
025 302 Aluminium 0.01 - 0.25mg/l 100 24mm 060 425
025 303 Ammonia 0.02 - 1.0mg/l N 100 24mm 060 425
025 304 Ammonium LR 0 - 2.5 mg/l N 50 24mm 060 425
025 305 Ammonium HR 1 - 50 mg/l N 50 Supplied -
025 306 Bromine 0.1 - 6.5 mg/l 100 Supplied -
025 338 Chloride 0.5 - 25 mg/l 100 24mm 060 425
025 307 Chlorine (Free) 0.05 - 3 mg/l 100 24mm 060 425
025 308 Chlorine (Total) 0.05 - 3 mg/l 100 24mm 060 425
025 309 Chlorine Dioxide 0.5 - 2.5 mg/l 100 24mm 060 425
025 314 Chromium (Hex) 0.02 - 2 mg/l 100 24mm 060 425
025 313 Chromium (Total) 0.02 - 2 mg/l 100 24mm 060 425
025 312 COD (HR) 1000 - 15000 mg/l O2 25 Supplied -
025 310 COD (LR) 0 - 150 mg/l O2 25 Supplied -
025 311 COD (MR) 100 - 1500 mg/l O2 25 24mm 060 425
025 316 Copper (free) 0.5 - 5 mg/l 100 24mm 060 425
025 315 Copper (Total) 0.5 - 5 mg/l 100 24mm 060 425
025 317 Fluoride 0.02 - 1.5 mg/l 100 24mm 060 425
025 318 Hardness Total 2 - 50mg/l CaCO3 100 24mm 060 425
025 320 Hydrogen Peroxide 0.5 - 1.5mg/l 100 24mm 060 425
025 321 Iodine 0.05 - 3.6 mg/l 100 24mm 060 425
025 322 Iron (soluble) 0.1 - 3mg/l 100 24mm 060 425
025 323 Manganese 0.05 - 4mg/l 100 24mm 060 425
025 324 Molybdate 0.5 - 30mg/l 100 24mm 060 425
025 325 Nitrate 1 - 30 mg/l 50 Supplied -
025 326 Nitrite 0.01 - 0.5mg/l 100 24mm 060 425
025 327 Nitrogen Total (LR) 0.5 - 25mg/l 50 Supplied -
025 328 Nitrogen Total (HR) 5 - 150mg/l 50 Supplied -
025 330 Orthophosphate 0.05 - 4mg/l 100 24mm 060 425
025 329 Oxygen Active 0.1 - 10mg/l 100 24mm 060 425
025 331 pH 6.5 - 8.4 100 24mm 060 425
025 332 Potassium 0.5 - 12 mg/l 100 24mm 060 425
025 333 Silica 0.05 - 3mg/l 100 24mm 060 425
025 334 Sulphate 2 - 100mg/l 100 24mm 060 425
025 335 Sulphide 0.05 - 0.5mg/l 100 24mm 060 425
025 336 Sulphite 0.05 - 4mg/l 100 24mm 060 425
025 337 Zinc 0.02 - 1mg/l 100 24mm 060 425
060 425 24mm screw cap vial (Pack of 24)
060 426 16mm screw cap vial (Pack of 20)

73 Series PC Software
Downloadable from www.Jenway.com
Models 7300, 7305, 7310 and
7315 are supplied with free
bi-directional PC software
which enables the instrument
to be controlled via the PC.
The PC software suite features
measurement modes for
photometrics, concentration,
spectrum scanning, quantitation
and kinetics as well as enhanced
data manipulation tools. Results
can easily be exported to Excel®
and charts can simply be copied.
The PC software suite increases
the number of results and
methods which can be stored and it enables multiple results to
be displayed simultaneously as well as spectrum and kinetics
curves.
7315
Through RS232 connection to PC, the software provides full Part code: 731 501
emulation of all the instrument’s functions and enables the

instrument to be directly driven from a PC. The PC software also
enables any optional accessories to be driven from a PC.
The settings menu in each

measurement mode enables easy
and simple set up of method
parameters which can be saved for
future use. The print options menu
enables printouts to be customised
to your requirements. Options
available include results tables,
spectrum and kinetics curves and
analysis results. The user login
identification and summary of
the method parameters are also
printed to enable traceability of
results.
Software upgrades are available to download

from www.jenway.com.

Complementary products
Also available from Bibby Scientific
Bibby Scientific Ltd is one of the largest broad based
manufacturers of laboratory products worldwide. Bibby
Scientific Ltd provides internationally recognised brands
with reputations for product quality and exceptional
performance. These famous brands are now brought
together in a single package to offer an excellent level of
quality, service and support.
Page 86 Stuart® Benchtop Science Equipment

Page 87 Electrothermal® Equipment for all your
heating, cooling and stirring needs
Page 88 Techne® Equipment for the Life Sciences

Also available from Bibby Scientific...
Stuart® Equipment
Benchtop Science Equipment
The Stuart® range of benchtop science equipment includes block heaters,

blood tube rotators, colony counters, hotplates, stirrers, rockers and
shakers, rotary evaporators and water baths. Stuart® are also market
leaders in melting point apparatus and water stills. The entire range is
protected by BioCote® antimicrobial protection.
Block Heaters
Suitable for microbiology and clinical laboratories
Centrifuges
Mini centrifuge range
Colony Counter
Ideal for all microbiology applications
Homogenisers
Designed for the homogenisation of material
Hotplates and Stirrers

Available with metal or ceramic surfaces
Incubators
For accurate temperature controlled applications
Melting Point Apparatus

Determine high accuracy melting points
Mixers
For sample agitation within the laboratory
Rotary Evaporators
Commonly used for separating solvents
Rockers and Shakers

Available in orbital, linear, gyratory and see-saw actions
Water Baths and Purification

6, 15 and 24L capacity water baths
w w w. s t u a r t - e q u i p m e n t . c o m

Techne® Equipment
Equipment for the Life Sciences
Techne is a long established name and world leader in the manufacture of

temperature control and essential equipment for the life sciences, research, clinical
and general laboratories. The Techne range of products encompasses temperature
controlled water baths, Dri-Block® heaters, cell culture equipment and molecular
biology products such as hybridisation incubators and thermal cyclers.
Baths and Thermoregulators

Allows precise temperature control
Biological Stirrers
Ideal for the growth of suspension cell culture
Dri-Block® Heaters
Compact constant temperature Dri-Block heating
Gelation Timers
Accurate measurement of gelation in the laboratory
Hybridisation Incubators
Ideal for blotting techniques
Sample Concentrators
Accelerates concentration of samples
Sample Cooling
Sample incubation under sub-ambient temperature
Thermal Cyclers
Compact, robust and versatile, the range includes models
to suit every application and budget. All models feature
Peltier technology, easily interchangeable blocks, intuitive
user interfaces and networkable to a PC for ease of control
and programming.
w w w. t e c h n e . c o m

Electrothermal® Equipment
Equipment for heating, cooling and stirring
Electrothermal are the newest addition to the Bibby Scientific portfolio and
are market leaders in heating mantle design and manufacture. The extensive
Electrothermal range includes controlled, stirring, Bunsen and spill-proof mantles in
various shapes and capacities. Alongside the heating mantle range, Electrothermal
offer an extensive selection of stirrers and melting point apparatus.
CMU Controlled Mantles

Chemical-resistant, lightweight and easy to clean
EM Heating Mantles
Maximum heat transfer with minimum risk
Extraction Heaters
Vented case’s unique air flow ensures the case remains
constantly cooled.
Heating Cords and Tapes

Offering tube insulation and protection.
Melting Points
Determine high accuracy melting points.
Kjeldahl Equipment
Equipment for the determination of nitrogen in organic
and inorganic substances.
Controllers
Ideal for all heating mantles, mats and tapes.
Paraffin range
For use in pathology and histology applications.
STEM
STEM range includes reaction blocks and stations which
are ideal for the measurement of reaction processes and
parallel synthesis.
w w w. e l e c t ro t h e r m a l . c o m

Technical Information
Jenway have a dedicated Technical Support team who are
on hand to help with any applications advice and questions
you may have about our products and how to use them.
The team is made up of experienced laboratory scientists
whose backgrounds include chemistry, biochemistry, cell and
molecular biology. There are two fully equipped laboratories
which are used for developing applications, testing new
products and assisting with customer protocols.
Page 90 Service and Repair

Page 91 Certifications and Conformity
Page 92 Guide to Spectrophotometry
Page 94 Voltage Variants

Service and Repair
service@bibby-scientific.com
Our dedicated service staff are on hand to help in the unlikely

event that your Jenway equipment develops a fault. Please
contact them by one of the following means with a clear
description of the problem:
E-mail: service@bibby-scientific.com
Tel: +44 (0) 1785 810475
Fax: +44 (0) 1785 810471
On occasion it may be necessary for your equipment to be

sent back to our Service Department for repair. In this case
please contact the Service Department for a reference number
which you should include with your faulty equipment. Please
also ensure you include a clear description of the fault and a
completed copy of our Decontamination Certificate. This is
available as a downloadable pdf file at www.jenway.com, or
contact us and we will be happy to fax you a copy. Please clearly
mark the package for the attention of the Service Department
and post to the following address:
Service Department
Bibby Scientific Ltd
Beacon Road, Stone
Staffordshire, ST15 0SA
All replacement parts are guaranteed for 1 year and where ever
possible, returned equipment is turned around in 5 working days.
Please contact our Service Department for further information
on onsite repairs and equipment calibration services.
Technical Support
jenwayhelp@bibby-scientific.com
Jenway have a dedicated Technical Support team who are on
hand to help with any applications advice and questions you may
have about our products and how to use them. The team is made
up of experienced laboratory scientists whose backgrounds
include chemistry, biochemistry, cell and molecular biology.
There are two fully equipped laboratories which are used for
developing applications, testing new products and assisting with
customer protocols. We aim to respond to queries on the same
day if at all possible. If you have any technical queries concerning
any of our products you may call our dedicated Technical Support
phone line or email us at the following address:
E-mail: jenwayhelp@bibby-scientific.com
Tel: +44 (0)1785 810433
Fax: +44 (0) 1785 810471

CE Conformity
Safety Standards
At Jenway we rigorously test our electrical products against the
CE and safety standards in place. In addition, the majority of our
products are independently tested by an accredited test house.
This is reinforced by comprehensive technical and manufacturing
data which is available for inspection upon request. Copies of the
Confirmity Certificates may be downloaded from our website
www.jenway.com
WEEE & RoHS Regulations

Legislation and Regulations
The Waste Electrical and Electronic Equipment legislation
(“the WEEE Regulations Directive 2002/96/EC”) is now in force
in the UK. The primary purpose of the WEEE directive is the
QUALITY MANAGEMENT SYSTEM - ISO 9001:2008 prevention of waste electrical and electronic equipment, and
This is to certify that: to require the re-use, recycling and other forms of recovery as
Bibby Scientific Ltd
Beacon Road to reduce such waste disposal to landfill or incineration.
Stone
ST15 0SA
United Kingdom
The restriction of the Use of Certain Hazardous Substances in
Holds Certificate No: FM 537326

Electrical and Electronic Equipment Regulations 2005 (“the
and operates a Quality Management System which complies with the requirements of ISO 9001:2008 for the following
scope: RoHS Regulations Directive 2002/95/EC”) have now been passed
The design, manufacture and distribution of electronic and electrical science equipment to
customer specifications. into UK legislation. The primary purpose of these regulations
is to restrict the use of lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE) in new electrical and electronic
For and on behalf of BSI:
equipment put on the market in the European Union after July
1, 2006. As a responsible manufacturer, Bibby Scientific will
Managing Director, BSI EMEA
comply with such regulation as it affects our products and will
Originally registered: 10/06/2008 Latest Issue: 06/04/2011 Expiry Date: 06/04/2014
continue to promote “clean” environmental manufacturing
Page: 1 of 1 practices.
This certificate was issued electronically and remains the property of BSI and is bound by the conditions of contract.
An electronic certificate can be authenticated online.
Printed copies can be validated at www.bsigroup.com/ClientDirectory
The British Standards Institution is incorporated by Royal Charter.

BSI (UK) Headquarters: P.O. Box 9000, Milton Keynes MK14 6WT. Tel: 0845 080 9000
ISO9001:2008
Quality Assurance
The Jenway quality assurance system was first approved in 1992,
and is currently certified to the International Quality Standard
BS EN ISO 9001:2008. This means that Jenway is committed to
providing the highest quality products, services and customer
satisfaction.
The scope of our certificate No. FM537326 is: Marketing, design,

manufacture and service of analytical and electrochemical
instrumentation.
Further details of certification may be downloaded from our

website: www.jenway.com

Visible or UV/Visible?
UV-Visible spectroscopy is the measurement of the absorbance at a specific wavelength by a sample within the UV
or visible regions of the spectrum. It is one of the oldest analytical techniques and is used to identify the presence
and concentration of many molecular entities. Therefore the first question to ask is whether a visible or UV/visible
spectrophotometer is required? The near UV region is considered to be from 200 to 380 nm and the visible region
from 380 to 800 nm. Jenway have extended the ranges of some of the visible and UV/visible spectrophotometers up
to 1100 nm, which is considered to be in the NIR part of the spectrum.
Is scanning capability required?

Many applications require an option for spectrum scanning i.e. measuring the absorbance at each wavelength
within a region of the spectrum. However some laboratories only require scanning to ‘trouble shoot’ the occasional
problem. The cost of the instrument is significantly reduced if scanning is not required.
What types of sample are being measured?

The majority of samples in UV/visible spectroscopy are liquid which are usually measured in 10mm glass or quartz
silica cuvettes depending upon the wavelength range required. Glass is only suitable for the visible region, whereas
quartz can be used in both the UV and visible region. A 10mm cuvette typically holds 2 to 3ml of sample. However
for applications such as DNA or protein assays where the amount of sample is limited Jenway offer micro cell holder
accessories and micro cuvettes that allow the accurate measurement of volumes down to 50μl. With the TrayCell
sample volumes as low as 2μl can be used. For extra sensitivity in sample measurement Jenway offer a range of long
path cell holders up to 100mm.
Optics system: single beam or double beam?

Jenway spectrophotometers are available with single, split-beam or double beam optics. Single beam
spectrophotometers are lower cost instruments, with the baseline to compensate for changes in lamp output
intensity and blank absorbance being stored prior to taking the sample measurement. The instrument automatically
compensates for the stored baseline when the sample is measured. In contrast double beam instruments record the
sample and reference simultaneously, resulting in the instrument electronics compensating for the reference in real
time. Double beam instruments tend to offer better stability in the UV region and are necessary when the blank or
sample solutions are unstable or transient.
Which light source?

UV/visible spectrophotometers generally use two light sources to ensure the spectral irradiance is of sufficient
intensity over the entire wavelength range. In these instruments the most common light sources used are tungsten
halogen lamps for the visible range and deuterium lamps for the UV wavelengths, with a source selector to switch
between the lamps. Jenway also offer a range of UV/visible and visible spectrophotometers that use a pulsed xenon
lamp. The pulsed xenon lamp offers a good intensity continuum over both the UV and visible parts of the spectrum
and has the added advantage of a much increased expected lifetime.
Is it a requirement to store methods and results?

To speed up the time taken for sample processing and to reduce user error, modern laboratories often have the
requirement for spectrophotometers to save both methods and results. Jenway spectrophotometers offer a range
of storage media from internal memory storage through to removable media such as SD cards.
Is it necessary to increase sample throughput?

In commercial laboratories the need to increase sample throughput and reduce sample handling leads to the need
for automated sample introduction by using either a multi-cell changer or a sipper system. Multi-cell changers can
be used in manual or automatic operation and are often used for enzyme kinetic assays. Sippers improve sample
throughput by using a peristaltic pump to introduce precise volumes of sample into a flowcell.

Is sample temperature control required?

Some analyses such as enzyme kinetics require the absorbance change to be measured over time and often require
the sample’s temperature to be controlled electrically (peltier control) or by circulating water through the sample
holder. Temperature control options are available for all Jenway spectrophotometers.
Does the spectrophotometer need to be connected to a PC?

Different measurements can require a differing degree of post-scan data
manipulation. Jenway spectrophotometers offer a wide-range of post
scan manipulation options and all can be connected to a PC.
Spectrophotometric Quantitation of Nucleic Acids

Spectrophotometric conversions
A260 = 1 (1cm detection path) Concentration (μg/ml water)

dsDNA 50
ssDNA 33
ssRNA 40
Oligonucleotide 20 - 30
Pure DNA has an A260/A280 ratio of 1.8-2.0 in 10mM Tris-Cl, pH 8.5

Pure RNA has an A260/A280 ratio of 1.9-2.1 in 10mM Tris-Cl, pH 7.5
Flame Photometry: Wavelengths of Elements

Spectrophotometric conversions
When sodium is introduced into a flame, it emits a radiation in the yellow region of the visible spectrum. The table
below gives details of the measurable atomic flame emissions of the alkali and alkaline earth metals in terms of the
emission wavelength and the colour produced.
Element Emission Wavelength (nm) Flame Colour

Barium (Ba) 554 Lime Green
Calcium (Ca) 622* Orange
Lithium (Li) 670 Red
Potassium (K) 766 Violet
Sodium (Na) 589 Yellow
*Note: Calcium is measured by using the calcium hydroxide band emission

at 622nm as the calcium main atomic emission occurs at 423nm.

Conductivity Meters
Voltage Variants

451 101 4510 conductivity meter supplied with glass conductivity probe with ATC (K=1) (027 013),
electrode holder and US power supply
electrode holder and EU power supply
electrode holder and 230V leaded power supply
electrode holder and US power supply
electrode holder and EU power supply
electrode holder and 230V leaded power supply
354 101 3540 conductivity/pH meter supplied with glass combination pH electrode (924 005), glass
conductivity probe (K=1, 027 013), electrode stand and holder, ATC probe (027 500), BNC
shorting plug, pH buffers and US power supply
shorting plug, pH buffers and EU power supply
shorting plug, pH buffers and 230V leaded power supply

Voltage Variants

950 101 9500 dissolved oxygen meter supplied with DO2 probe with ATC (522 023), electrode holder,
spare membranes, KCl fill solution, zero calibration salts, adapter bush and US power supply
spare membranes, KCl fill solution, zero calibration salts, adapter bush and European power
supply
spare membranes, KCl fill solution, zero calibration salts, adapter bush and 230V leaded power
supply

Flame Photometers
Voltage Variants

500 731 PFP7 industrial flame photometer supplied with Na, K, Ba, Ca and Li filters, connecting hoses
and clips, compressor plug and drain trap (110V/60Hz)
500 831 PFP7/C clinical flame photometer supplied with Na, K and Li filters, connecting hoses and clips,
compressor plug and drain trap (110V/60Hz)
Fluorimeters
Voltage Variants

632 031 Sipper pump, supplied with inlet and outlet tubing (110V/60Hz)
Ion Meters
Voltage Variants
548 101 3345 dual channel ion meter supplied with glass combination pH electrode (924 005), electrode
stand electrode holder, BNC to S7 leadless connector (013 173) for connection to ISEs, ATC probe
(027 232), buffer sachets and US power supply
(027 232), buffer sachets and EU power supply
(027 232), buffer sachets and 230V leaded power supply

pH Meters
Voltage Variants
351 101 3510 pH/mV meter supplied with glass combination pH electrode (924 005), electrode stand and
holder, ATC probe (027 500), BNC shorting plug, pH 4, 7 and 10 buffers and US power supply
holder, ATC probe (027 500), BNC shorting plug, pH 4, 7 and 10 buffers and European power
supply
holder, ATC probe (027 500), BNC shorting plug, pH 4, 7 and 10 buffers and 230V leaded power
supply
holder, ATC probe (027 500), BNC shorting plug, pH 4, 7 and 10 buffer sachets and US power
supply
holder, ATC probe (027 500), BNC shorting plug, pH 4, 7 and 10 buffer sachets and European
power supply
holder, ATC probe (027 500), BNC shorting plug, pH 4, 7 and 10 buffer sachets and 230V leaded
power supply
shorting plug, pH buffers and US power supply
shorting plug, pH buffers and EU power supply
shorting plug, pH buffers and 230V leaded power supply
Spectrophotometers
Voltage Variants

630 531 6300 visible spectrophotometer supplied with mains lead, pack 100 disposable cuvettes,
10 x 10mm cell holder, interface cable and PC application software on CD-ROM (110/60Hz)
632 521 6320D visible spectrophotometer supplied with mains lead and dual cell holder (for 10mm
square cuvettes and 12.7mm diameter tubes) (110V/60Hz)
635 031 6305 UV/visible spectrophotometer supplied with mains lead, pack 100 disposable cuvettes,
10 x 10mm cell holder, interface cable and PC application software on CD-ROM (110V/60Hz)
636 035 Genova UV/visible life sciences spectrophotometer supplied with TrayCell, mains lead,
8 x 750µl UV plastic cuvettes and cell holder (110V/60Hz)
632 031 Sipper pump, supplied with inlet and outlet tubing (110V/60Hz)
543 201 40 column printer supplied with interface cable, paper roll (060 287) and ribbon (060 288)
and EU power adapter
543 501 40 column printer supplied with interface cable, paper roll (060 287)and ribbon (060 288)
and US adapter

Index
Bold numbers represent comparison charts Index by Name
Description Page Number

Colorimeter 6
Colorimeter Accessories 7
Cells & Cuvettes 7
Conductivity Meters 10, 11 - 16

Bench Conductivity Meters 10, 12, 13
Bench Conductivity/ pH Meters 10, 15, 42, 50
Portable Conductivity Meters 10, 11
Portable Conductivity/pH Meters 10, 14, 42, 49
Conductivity Accessories 16, 17
Conductivity Cells 16
Printers & PC Software 17
Standards & Buffers 17
Dissolved Oxygen Meters 20, 21 - 24

Bench DO2 20, 22
Portable DO2 20, 21
Dissolved Oxygen Meter Accessories 23, 24
B.O.D Accessories 23
Consumables 24
Printers & PC Software 24
Probe Accessories 23
Probes 23
Flame Photometers 26 - 28
Clinical Flame Photometer 27
Industrial Flame Photometer 26
Flame Photometer Accessories 28
Clinical Standards 28
Industrial Standards 28
Fluorimeters 30 - 34
62 Series Fluorimeters 30, 31
Fluorimeters Accessories 32 - 34
Cuvettes 34
Filters 32
Heated Cell System 33
Interference Filters 32
PC Software 34
Printers 34
Sipper Pump 33
Ion Meters 36 - 40
Bench Ion Meters 37
Portable Ion/pH Meters 36, 42, 45
Ion Meter Accessories 38 - 40
Ion Selective Electrode Consumables 40

Index
Index by Name Bold numbers represent comparison charts

Ion Selective Electrode Kits 40
Ion Selective Electrodes 39
Printers 38
Reference Electrodes for Mono ISEs 39
Temperature Probes and Connectors 38

pH Meters 42 - 56
Bench Conductivity/ pH Meter 10, 15, 42, 50
Bench pH 42, 46, 48
Bench pH/mV Meter 42, 47
Portable Conductivity/pH Meter 10, 14, 42, 49
Portable Ion/pH Meter 36, 42, 45
Portable pH Meter 42, 43
Portable pH/mV Meter 42, 44
pH Meter Accessories 51 - 55, 56
Buffers & Solutions 55
pH Electrodes 51 - 54, 56
Application Specific 52
Combination 52
Performance 51
Waterproof 53
Spectrophotometers 58 - 84
UV/Visible 58, 59, 61, 65, 67 - 71, 74, 75, 78, 79
Visible 58, 59, 60, 64, 66,
Double Beam 58, 59, 78, 79
Single Beam 58, 59, 60, 61, 64 - 71
Split Beam 58, 59, 74, 75
General Spectrophotometer Accessories 80 - 83
Disposable Cuvettes 80
Glass Cuvettes 80
Flow Cells 81
Quartz Cuvettes 81
TrayCell 82
Environmental Test Kits 83
Environmental Test Kit Vials 83
63 Series 58, 59, 60 - 63

6300 & 6320D Visible Spectrophotometers 58, 59, 60
6305 UV/Visible Spectrophotometers 58, 59, 61
63 Series Accessories 62, 63
Cuvette Holders 62
Printers 62
Sipper Pump 63
73 Series 58, 59, 64 - 73

7300 Visible Spectrophotometer 58, 59, 64
7305 UV/Visible Spectrophotmeter 58, 59, 65

Index
Bold numbers represent comparison charts Index by Name

7310 Visible Scanning Spectrophotometer 58, 59, 66
7315 UV/Visible Scanning Spectrophotometer 58, 59, 67
Genova Plus 58, 59, 68, 69
Genova Nano 58, 59, 70, 71
Active 72, 73
Automatic 8 Position Cuvette Holder 72, 73
Combined Sipper Peltier 72, 73
Sipper Pump 72, 73
Temperature Control 72, 73
Passive 73
Cuvette Holders 73
Printer 73
67 Series 58, 59, 74 - 77

6700 Visible Scanning Specrophotometer 58, 59,74, 75
6705 UV/Visible Scanning Spectrophotometer 58, 59, 74, 75
6715 UV/Visible Scanning Spectrophotometer 58, 59, 74, 75
Cell Holders 76, 77
Heated Cell & Sipper Pump 76, 77
Printers 77
6850 Series 58, 59, 78, 79

6850 UV/Visible Double Beam Spectrophotometer 58, 59, 78, 79
6850 Series Accessories 78
Voltage Varients 94 - 96
Conductivity Meters 94
Dissolved Oxygen Meters 94
Flame Photometers 95
Fluorimeters 95
Ion Meters 95
pH Meters 96
Spectrophotometers 96

Index
Index by Part Code Bold numbers represent comparison charts
Part Code Page Number Part Code Page Number Part Code Page Number
012 075 63 025 092 40 025 165 17
012 075 73 025 093 40 025 167 40
012 075 77 025 094 40 025 169 40
012 094 63 025 095 40 025 171 28
012 146 73, 77 025 096 40 025 179 55
013 161 38 025 097 40 025 180 55
013 173 38 025 098 40 025 181 55
019 133 77 025 099 40 025 192 55
019 146 73 025 100 40 025 196 55
021 007 17 025 101 40 025 197 55
021 007 24 025 106 40 025 300 83
021 007 55 025 107 40 025 301 83
021 008 55 025 118 40 025 302 83
021 030 46 025 120 40 025 303 83
021 146 34 025 122 40 025 304 83
025 004 28 025 126 40 025 305 83
025 005 28 025 127 40 025 306 83
025 006 28 025 128 40 025 307 83
025 007 28 025 129 40 025 308 83
025 008 28 025 130 40 025 309 83
025 009 28 025 132 40 025 310 83
025 021 28 025 134 40 025 311 83
025 023 28 025 136 40 025 312 83
025 024 28 025 138 17 025 313 83
025 025 28 025 139 17 025 314 83
025 027 28 025 142 40 025 315 83
025 037 55 025 143 40 025 316 83
025 038 55 025 144 40 025 317 83
025 039 55 025 145 40 025 318 83
025 051 40 025 146 40 025 320 83
025 053 40 025 147 40 025 321 83
025 055 40 025 148 40 025 322 83
025 057 40 025 149 40 025 323 83
025 059 40 025 150 40 025 324 83
025 061 40 025 151 40 025 325 83
025 063 40 025 152 40 025 326 83
025 065 40 025 156 17 025 327 83
025 067 40 025 157 17 025 328 83
025 069 40 025 157 55 025 329 83
025 071 40 025 158 17 025 330 83
025 073 40 025 158 55 025 331 83
025 075 40 025 159 17 025 332 83
025 085 40 025 159 55 025 333 83
025 087 40 025 160 55 025 334 83
025 088 40 025 161 55 025 335 83
025 089 40 025 162 55 025 336 83
025 090 40 025 163 55 025 337 83
025 091 40 025 164 17 025 338 83

Index
Bold numbers represent comparison charts Index by Part Code
027 013 16 035 143 80 351 101 96
027 113 16 035 262 82 351 201 96
027 211 16 035 263 82 351 301 96
027 212 16 035 264 82 352 001 42, 48
027 213 16 035 281 81 352 101 96
027 227 53, 56 035 282 81 352 201 96
027 232 38 037 551 17 352 301 96
027 298 16 037 551 34 354 001 10, 15
027 500 54 037 551 54 354 001 42, 50
027 502 16 037 551 62 354 101 94
027 502 54 037 701 17 354 101 96
027 801 16 037 701 24 354 201 94
027 802 16 037 701 34 354 201 96
027 900 16 037 701 54 354 301 94
028 200 33 037 702 24 354 301 96
033 162 55 037 702 34 370 271 42, 44
033 267 55 037 702 54 430 231 16
033 268 17 037 702 77 430 271 10, 14
033 268 55 037 801 17 430 271 42, 49
033 269 17 037 801 54 451 001 10, 12
033 270 24 050 501 17 451 101 94
033 290 34 050 501 24 451 201 94
033 290 63 050 501 34 451 301 94
035 027 7 050 501 54 452 001 10, 13
035 027 80 060 084 7 452 101 94
035 028 81 060 084 80 452 201 94
035 029 7 060 087 7 452 301 94
035 029 80 060 087 80 470 271 10, 11
035 030 81 060 229 80 500 019 28
035 044 81 060 230 80 500 093 28
035 045 81 060 231 80 500 134 28
035 047 81 060 232 80 500 172 28
035 056 81 060 247 34 500 176 28
035 079 80 060 253 34 500 177 28
035 086 7 060 254 34 500 178 28
035 086 80 060 255 34 500 179 28
035 087 80 060 287 38 500 180 28
035 088 77 060 287 62 500 701 26
035 091 77 060 288 38 500 731 95
035 120 34 060 288 62 500 801 27
035 121 34 060 406 17 500 831 95
035 122 34 060 406 24 522 019B 23
035 123 80 060 406 55 522 023B 23
035 124 81 060 422 7 522 050B 23
035 125 81 060 422 77 535 001 28
035 126 80 350 271 42, 43 535 002 28
035 127 81 350 501 42, 46 535 002 95
035 138 81 351 001 42, 47 538 014 53

Index
Index by Part Code Bold numbers represent comparison charts
539 501 36 627 151 32 628 501 31
539 501 42, 45 627 152 32 630 005 62
541 520B 23 627 153 32 630 005 73
541 553 24 627 154 32 630 005 77
542 009 62 627 155 32 630 028 34
543 001 38 627 156 32 630 028 63
543 001 62 627 157 32 630 204 62
543 201 96 627 158 32 630 204 73
543 501 96 627 159 32 630 204 77
544 008 38 627 160 32 630 304 62
548 001 37 627 161 32 630 304 73
548 101 95 627 162 32 630 304 77
548 201 95 627 163 32 630 501 58, 59, 60
548 301 95 627 164 32 630 531 96
552 050 23 627 165 32 632 001 33
605 001 6 627 166 32 632 001 63
605 003 7 627 167 32 632 031 33
605 064 7 627 168 32 632 031 63
606 017 7 627 169 32 632 031 95
606 018 7 627 170 32 632 031 96
627 001 31 627 171 32 632 501 60
627 124 32 627 172 32 632 511 62
627 125 32 627 173 32 632 521 96
627 126 32 627 174 32 634 001 62
627 127 32 627 175 32 635 001 58, 59, 61
627 128 32 627 176 32 635 031 96
627 129 32 627 177 32 636 024 62
627 130 32 627 178 32 636 035 96
627 131 32 627 179 32 637 071 62
627 132 32 627 180 32 637 071 73
627 133 32 627 181 32 637 071 77
627 134 32 627 182 32 648 001 62
627 135 32 627 183 32 648 001 77
627 136 32 627 184 32 660 001 77
627 137 32 627 185 32 660 101 73
627 138 32 627 186 32 660 101 77
627 139 32 627 187 32 660 201 76, 77
627 140 32 627 188 32 660 301 76, 77
627 141 32 627 189 32 660 401 76, 77
627 142 32 627 190 32 660 403 77
627 143 32 627 191 32 660 501 76, 77
627 144 32 627 192 32 660 503 76, 77
627 145 32 627 193 32 660 701 76, 77
627 146 32 627 194 32 661 201 77
627 147 32 627 195 32 670 0B0 58, 59, 75
627 148 32 627 196 32 670 5B0 58, 59, 75
627 149 32 627 197 32 671 5B0 58, 59, 75
627 150 32 628 001 31 685 005 78

Index
Bold numbers represent comparison charts Index by Part Code
685 131 78 924 056 53 924 510 39
685 204 78 924 067 16, 56 924 511 39
685 304 78 924 067 52 924 512 39
685 401 78 924 068 52 924 513 39
685-SC 58, 59, 78, 79 924 069 52 924 515 39
730 001 58, 59, 64 924 070 52, 56 924 516 39
730 501 58, 59, 65 924 076 52, 56 924 517 39
731 001 58, 59, 66 924 077 52, 56 924 518 39
731 501 58, 59, 67 924 078 52, 56 924 519 39
735 001 73 924 079 52, 56 924 521 39
735 201 72, 73 924 080 52, 56 924 523 39
735 301 72, 73 924 300 39 924 904 51
735 401 72, 73 924 301 39 924 905 51
735 601 73 924 302 39 950 001 20, 22
735 701 72, 73 924 304 39 950 101 94
736 201 72, 73 924 305 39 950 201 94
736 501 58, 68,69 924 307 39 950 301 94
737 501 58, 70,71 924 308 39 970 231B 23
903 300 17 924 309 39 970 271 20, 21
903 300 24 924 311 39 983 030 24
903 300 38 924 313 39
903 300 55 924 314 39
924 001 52, 56 924 316 39
924 002 52, 56 924 317 39
924 003 52, 56 924 318 39
924 005 52, 56 924 321 39
924 007 52, 56 924 322 39
924 010 52, 56 924 323 39
924 015 52, 56 924 324 39
924 016 39 924 325 39
924 016 39 924 327 39
924 016 54 924 328 39
924 017 39 924 329 39
924 017 39 924 400 40
924 017 54 924 401 40
924 030 52, 56 924 402 40
924 034 52, 56 924 404 40
924 035 52 924 405 40
924 036 39 924 500 39
924 036 54 924 501 39
924 047 52, 56 924 502 39
924 049 52, 56 924 503 39
924 050 52, 56 924 504 39
924 051 52, 56 924 505 39
924 052 53, 56 924 506 39
924 053 53 924 507 39
924 054 53 924 508 39
924 055 53 924 509 39

Bibby Scientific - UK
Beacon Road, Stone,
Staffordshire,
ST15 0SA,
United Kingdom
T: +44 (0)1785 812121
F: +44 (0)1785 813748
E: sales@bibby-scientific.com
Double Beam Spectrophotometers

Life Science Spectrophotometers
Probes and Electrodes
pH Meters
Find out more!!!

w w w . j e n w a y. c o m w w w. b i b b y - s c i e n t i f i c . c o m

Jenway Catalogue PDF

Uploaded by

Copyright:

Available Formats

Jenway Catalogue PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Jenway Catalogue PDF

Uploaded by

Copyright:

Available Formats

Double Beam Spectrophotometers

Life Science Spectrophotometers

Equipment for Analysis

As one of the largest broad based manufacturers of benchtop

A Bibby Scientific Company

Electrothermal are the newest addition to the Bibby Scientific

Jenway® manufactures a wide range of analytical scientific

The extensive Stuart® range includes blood tube rotators,

Techne® is a world leader in the manufacture of temperature

Page 2 Jenway Catalogue

i Introduction to Bibby Scientific

Find out more! Please scan the QR/Mobile Tag with

• New 73 series spectrophotometers – entry-level

• The new Genova Plus and Genova Nano life science

• New variable double beam spectrophotometer, model 6850 –

Each section of this catalogue contains a summary page to aid

Please visit www.jenway.com to download instruction manuals,

All electrical products produced by Bibby Scientific conform to the

The products featured in this catalogue are available through a

Page 4 Jenway Catalogue

Page 6 Bench Colorimeter

Find out more! Please scan the QR/Mobile Tag with

Standard 10mm square cuvettes, semi-micro volume cuvettes,

Wavelength range 400 to 710nm

Part Code Description

* Voltage variants available see page 94

Page 6 Jenway Catalogue

Part Code Description

Cells and Cuvettes

Jenway Catalogue Page 7

Stuart® Benchtop Science Equipment

Jenway® Equipment for Analysis

Techne® Equipment for the Life Sciences

Electrothermal® Equipment for

Find out more!!!

Page 8 Jenway Catalogue

Page 10 Conductivity Meter Options

Find out more! Please scan the QR/Mobile Tag with

Combined Conductivity and pH Meters Options

Page 10 Jenway Catalogue Jenway Catalogue

Part Code Description

*With K=5 cell

Jenway Catalogue Page 11

accuracy is required the 4510 has automatic conductivity standard resolution

constant, temperature coefficient and reference temperature. solutions

sent to a printer or transferred to computer via DataWay and • Storage of up to 32 results

the RS232 interface. • Bi-directional RS232 link to printer or PC

Part Code Description

*With K=10 cell

Page 12 Jenway Catalogue

Part Code Description

Jenway Catalogue Page 13

Enterprise Conductivity/pH Meter • Simultaneous display of pH, conductivity and

Part Code Description

Page 14 Jenway Catalogue

Part Code Description

Jenway Catalogue Page 15

Part Code Description Unit

Part code: 027 298