PDMS Query Commands

NEW STRU COPY $V1 COPIES STRU FROM 1 SITE TO ANOTHER

Q USERM GIVES CREATORS NAME

Q PPLIN TOS START WRT/DATUM GIVES TOP OF STEEL OF UB/UC

Q IDP @ WRT /DATUM GIVES THE COORD OF A POINT

Q ADEG (DRAFT) GIVES THE C/VIEW ANGLE (ie 90 DEG)

Q ANGLE (HVAC) GIVES THE CE ANGLE

Q ATEX (DRAFT) GIVES THE SLAB TEXT ATTRIBUTES

Q ATT GIVES THE CE ATTRIBUTES

Q BANG GIVES THE CE BETA ANGLE

Q BORE (PIPING) GIVES THE PIPE INSIDE DIA.

Q BSRF (DRAFT) GIVES THE ATTACHED DRG/SHT (DRWG LEVL)

Q BTEX (DRAFT) GIVES THE TEXT/GLAB ATTRIBUTES

Q CHEI (DRAFT) GIVES THE CHARACTER HEIGHT

Q CLL (PIPING) GIVES THE PIPE BRANCH LENGTH

Q COL 4 (ETC) GIVES THE ATTRIBUTED COLOUR (YELLOW)

Q COL ACT GIVES THE CURRENT ACTIVE COLOUR

Q COL AIDS GIVES THE CURRENT AID LINE COLOUR

Q COL CE GIVES THE CURRENT ATTRIBUTED COLOUR

Q COL VIS GIVES THE CURRENT VISIBLE COLOUR

Q CREF GIVES THE CONNECTION REFERENCE

Q CUTL GIVES THE CE CUT LENGTH

Q DDNAME (DRAFT) GIVES THE DIMENSION OWNERS NAME

Q DER LEN GIVES THE CE EXACT LENGTH

Q DESC GIVES THE CE DESCRIPTION

Q DESP GIVES THE CE PARAMETERS

Q DIR (DRAFT) GIVES THE C/VIEW ANGLE (ie N)

Q DISPLAY GIVES THE TOLERANCE & REPRES LEVELS

Q DMTXT (DRAFT) GIVES THE DIM TEXT ATTRIBUTES

Q DNST GIVES THE CE DENSITY

Q DPOS (DRAFT) GIVES THE LDIM POSITION ON SHEET

Q DRNE GIVES THE END CUT-PLANE DIRECTION

Q DRNS GIVES THE START CUT-PLANE DIRECTION

Q DTER (DRAFT) GIVES THE LAYER/LDIM TERM'TR DEFAULT

QE GIVES THE CE EAST CO-ORDINATE

Q ELEM GIVES THE CE ELEMENT NAME

Q FPT (DRAFT) GIVES THE STRA FROM POINT CO-ORDS

GIVES THE PLOO/PAVE RADIU ie 100mm
Q FRAD GIVES THE NEXTR/VERT RADIUS ie 100mm

Q FUNC GIVES THE CE FUNCTION

Q GCOF GIVES THE CE GROSS C OF G

Q GTYP GIVES THE GENERIC TYPE i.e. OD, HP, TG

Q GWEI GIVES THE CE GROSS WEIGHT

Q H (PIPE SUPPT) GIVES THE CE HANDER HEAD CO-ORDS

Page 3 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
Q HEI GIVES THE CE (PLOO LVL) PLT THK

Q HPOS (PIPING) GIVES THE CE PIPE HEAD CO-ORDINATES

Q HT (PIPE SUPT) GIVES THE CE HANDER TAIL CO-ORDS

Q IDP @ WRT /* GIVES THE CE P POINT CO-ORDINATES

Q IDPL @ GIVES THE PLINE NAME USING CURSOR

Q INREF GIVES THE CE IN REFERENCE

Q ISPEC (PIPING) GIVES THE CE (PIPE) INSULATION

Q ITLE GIVES LENGTH OF IMPLIED TUBE

Q JLIN GIVES THE CE JOINT LINE

Q JUSL GIVES THE CE JUSTIFICATION LINE

Q LASTMOD GIVES THE DAT STRU WAS LAST MODIFIED

Q LEN (DRAFT) GIVES THE STRA LENGTH

Q LEV GIVES THE CE LEVEL (OBSTRUCTION ETC)

Q LHEI (DRAFT) GIVES THE TEST LETTER HEIGHT

Q LIST GIVES THE CE FITTINGS (NEG EXTR. ETC)

Q LOCK GIVES THE LOCK STATUS

Q LSHAPE (DRAFT) GIVES THE LABEL LEADER LINE STATUS

Q MATREF GIVES THE CE MATERIAL REF

Q MCOUNT GIVES THE NOS OF SUB MEMBERS IN CE

Q MCOUNT SCTN GIVES THE NOS OF SCTN MEMBERS IN CE

Q MDB GIVES THE PROJECT DATABASE

Q MEM GIVES THE CE MEMBERS

Q MEML GIVES THE CE MEMBER LINE

Q MIDP GIVES THE CE MIDPOINT CO-ORDINATES

Q MPT (DRAFT) GIVES THE STRA MID POINT CO-ORDS

Q MTLE GIVES LENGTH OF MATERIAL TUBE

Q MTLL GIVES CL LENGTH OF MATERIAL TUBE

Q MTO GIVES THE CE MTO STATUS

Q NAM GIVES THE CE NAME

Q NCOF GIVES THE CE NET C OF G

Q NSRF GIVES THE CE NET SURFACE

Q NVOL GIVES THE CE NET VOLUME

Q NWEI GIVES THE CE NET WEIGHT

Q OBS GIVES THE CE OBSTRUCTION LEVEL

Q ORI GIVES THE CE ORIENTATION (SLOPE)

Q OSRF GIVES THE SHEET OVERLAY (VIEW ONLY)

Q OWN GIVES THE CE OWNER

Q PA (PIPING) GIVES TE C ARRIVE CO-ORDINATES

Q PARA GIVES THE CE PARAMETERS ie SERIAL SIZES

Q PH (PIPING) GIVES THE CE PIPE HEAD ATTRIBUTES

Q PH BORE (PIPING) GIVES THE CE (PIPE HEAD) BORE

Q PH OD (PIPING) GIVES THE CE (PIPE HEAD) DIAMETER

Q PI WRT/* (PIPING) GIVES THE CE (PIPE SUPPORT) LOCATION

Q PKEY (DRAFT) GIVES THE DIM PLINE STATUS (ie TCTF)

Q PL WRT/* (PIPING) GIVES THE CE HVAC LEAVE CO-ORDINATES

Q PLNA GIVES THE PLINE NAMES

Page 4 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
Q PLTXT (DRAFT) GIVES THE PROJ TEST ATTRIBUTES

Q POS GIVES THE CE CO-ORDINATES (START)

Q POS FITT GIVES THE C/FITT CO-ORDINATES (START)

Q POS IDPL @ GIVES THE PLINE CO-ORD AT CE START

Q POS IN $V1 GIVES THE CE DISTANCE TO VAR. $V1

Q POS PIN1 WRT/* GIVES THE CE CO-ORDINATES OF PIN 1

Q POS PLRF (DRAFT) GIVES TE CURRENT VSEC CO-ORDS

GIVES THE CENTRE CO-ORDINATE POSITIONS OF THE
Q POS POPLI NA PROP 0.5 PLINE (PPLI) AT (0.5X DER LEN) ON THE N/A

Q POS PPL1 BOS WRT/* GIVES THE BOS PLINE CO-ORDINATES

GIVES THE DIST FROM CE TO START OF IDENTIFIED
Q POS WRT TO ID@ MEMBER

Q POS1 WRT/* GIVES THE CE CO-ORDINATES OF PIN 1

Q POSE GIVES THE CE END CO-ORDINATES

GIVES THE CENTRE CO-ORDINATE POSITIONS OF THE
Q POSPPLI NA PROP 0.5 PLINE (PPLI) AT (0.5X DER LEN) ON THE N/A

Q POSS GIVES THE CE START CO-ORDINATES

Q POSS POSE GIVES THE CE BOTH END CO-ORDINATES

Q POST FITT GIVES THE C/FITT CO-ORDINATES (START)

Q POST IN $V1 GIVES THE CE DISTANCE TO VAR.$V1

Q POST PLRF (DRAFT) GIVES THE CURRENT VSEC CO-ORDS

Q PRLS GIVES THE DESP NAME TYPES

Q PT (PIPING) GIVES THE CE (PIPE TAIL) ATTRIBUTES

Q PT OD (PIPING) GIVES THE CE (PIPE TAIL) DIAMETER

Q PURP GIVES THE STRU PURPOSE ATTRIBUTE

Q RAD (HVAC) GIVES THE CE RADIUS

Q RCOD (DRAFT) GIVES THE VIEW ORIENTATION

Q REF GIVES THE CE PDMS REFERENCE NO

Q REPRES GIVES THE CE REPRESENTATION STATUS

Q RRSF (DRAFT) GIVES THE CURRENT VIEW RULE SETTINGS

Q SIZE (DRAFT) GIVES THE VIEW O/ALL DIMENSIONS

Q SJUS GIVES THE PLOO JUSTIFICATION ie UTOP, DCEN, DBOT

Q SNAP (DRAFT) GIVES THE SNAP SETTING (ON/OFF)

Q SPRE GIVES THE CE SPECIFICATION REFERENCE

Q STEXT GIVES THE ATT PENETRATION IDENT

Q TCTL OR (Q CUTL) GIVES THE CE CUT LENGTH

Q THMRF (DRAFT) GIVES THE CE (SYMBOL) NAME

Q THPOS (DRAFT) GIVES THE C/VIEW MATCHLINE CO-ORDS

Q TPOS (PIPING) GIVES THE CE PIPE TAIL CO-ORDS

Q TPT (DRAFT) GIVES THE STRA TAIL POINT CO-ORDS

Q TULE GIVES THE BRANCH TUBE LENGTH

Q TYPE GIVES THE CE TYPE ie SCTN, PANE

Q USER GIVES THE CE USER DATABASE

Q USERMOD GIVES THE LAST USER LOGIN ID (STRU)

Q VLIMITS (DRAFT) GIVES THE VIEW LIMITS

Q VOL CE GIVES THE CE VOLUME

Q: DTYPE GIVES THE FRMW STYLE TYPE (ie STLS)

Page 5 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
Q: STATUS GIVES THE CE STRU STATUS ie 'AFC'

Q:SWCODE GIVES THE CE WEIGHT CODE

PDMS TYPED COMMANDS

ADD ALL EQUIP WITHIN VOL CE ADDS ALL EQUIPMENT THAT OVERLAPS CE

ADD ALL SCTN WITHIN VOL CE ADDS ALL SECTIONS THAT OVERLAP CE

ADD ALL STRU WI PURP EQ 'PS' ADDS ALL STRU WITH PURPOSE ATTRIBUTE

ADD ALL WITHIN VOL CE ADDS ALL DISCIPLINES THAT OVERLAP CE

ADDS ALL DISCIPLINES THAT OVERLAP CE WITH A VOLUME
ADD ALL WITHIN VOL CE 100 OF +100mm

ADD CE ADDS CE

ADD CE COL 39 ADDS CE WITH COL 39(SEE COLOUR SHEET)

ADD CREF ADDS CE PIPE CONNECTION REF

ADD SITE ADDS CE SITE

AID CLEAR LINE ALL REMOVES UNWANTED LINES FROM PDMS

AT @ MOVES CE TO NEW CURSOR POS

AT IDP@ MOVES CE TO SELECT PPOINT

AT IDPL@ MOVES CE TO SELECT PLINE

AXES AT CE PLACES CE AXES

AXES AT PA CE PLACES AXES AT PIPE ARRIVE POINT

AXES AT PPLI TOS PROP 1 PLACES AXES AT THE END OF TOS PLINE

AXES OFF REMOVES CE AXES

BY D100 MOVES CURRENT ELEMENT DOWN BY 100mm

BY D100 (PDMS ONLY) MOVES CE DOWN 100mm

BY E100 MOVES CURRENT ELEMENT EAST BY 100mm

BY E100 (PDMS ONLY) MOVES CE EAST 100mm

MOVES CE E2" (INCHES) WRT CE (DETERMINE CORRECT CE
BY E2IN WRT CT AXIS FIRST)

BY E3.1/2.1IN MOVES CE E3. 1/2" (INCHES)

BY E3.1/2.1IN (PDMS ONLY) MOVES CE EAST 3 1/2"

BY N100 MOVES CURRENT ELEMENT NORTH BY 100mm

BY N100 (PDMS ONLY) MOVES CE NORTH 100mm

BY U100 MOVES CURRENT ELEMENT UP BY 100mm

BY U100 (PDMS ONLY) MOVES CE UP 100mm

BY X100 (DRAFT & DESIGN) MOVES CURRENT ELEMENT X (EAST) BY 100mm

BY X100 (DRAFT & PDMS) MOVES CE X (EAST) 100mm

BY X100 WRT/*/(PDMS PLATES) MOVES CE X (EAST) 100mm WRT TO WORLD

MOVES CURRENT ELEMENT X (EAST) BY 100mm WITH
BY X100 WRT/*/(PDMS PLATES) RESPECT TO WORLD

CALL STL GSCTNTAG OFF UNMARKS SCTN

CALLSTL GSCTNTAG CE MARKS CE SCTN START & END

CHE CE GIVES CONSISTENCY CHECK ON CE

COL 39 YELLOW CHANGES LIN COL TO YELLOW

COL ACT BLUE CHANGES THE ACTIVE COLOUR TO BLUE

COL ACT VIOLET CHANGES THE CE COLOUR TO VIOLET

DELETE CE DELETES THE CE

Page 6 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
 RUNS CLASH CHECK ON CE (TYPE EXIT TO CLEAR MACRO &
DESCLASH CHECK CE RETURN TO DESIGN)

DRNE PERP CUTS THE SCTN END AT 90DEG TO SECTION

ENHANCE CE COL YELLOW DISPLAYS CE AS YELLOW

ENHANCE CE TRANSL 0 DISPLAYS CE AS A SOLID

ENHANCE CE TRANSL 60 DISPLAYS CE TO 60% TRANSLUCENCY

EXT END -1000 EXTENS THE END -1000

EXT END THR ID@ EXTENDS END TO JUSTIFICATION LINE

EXT END THR IDPL@ EXTENDS END TO A SELECT PLINE

EXT END TO ID@ EXTENDS THE END TO SELECTED ITEM

EXT END TO IDP@ EXTENDS THE END TO A SELECTED PPOINT

EXT END TO IDPL@ EXTENDS THE END TO A SELECTED PLINE

EXT STA -1000 SHORTENS THE START BY -1000

EXT STA THR IDP@ EXTENDS START TO A SELECTED PPOINT

FINISH ENDS & SAVES PDMS SESSION

FLIP CE FLIPS CE

GETWROK GETS LATEST MODEL

INCL CIRC 1 OF NOTE/TABLE REPOSITIONS CIRC 1 TO PREV SELECTED DESTINATION

GIVES THE CE CO-ORDINATES (START) OR ITEM TO BE

INCL ID@ TRANSFERRED

INCL NAME REPOSITIONS CE TO A SELECTED DESTINATION

LOCK ALL LOCK ALL ELEMENTS FROM THE CURRENT

MAR CE MARKS CE NAME

MAR WI 'TEMPORARY' CE TAGS CE WITH TEMPORARY

MARK CE MARKS CE NAME

MOVES CE WRT TO ITS OWN AXIS E TO A SELECTED
MOV E WRT CE TO ID@ (PDMS) ELEMENT

MOV U TO IDP@ (PDMS) MOVES UP TO A SELECTED ELEMENT

MOV W TO IDPL @ (PDMS) MOVES WEST TO A SELECTED PLINE

MOVE U THR ID@(PDMS) MOVES CE UP TO A SELECTED ELEMENT

MOVE U WRT/* THR ID@(PDMS) MOVES CE UP ONTO SELECTED ITEMS JUSTIFICATION LINE

MOVE W THR IDP@(PDMS) MOVES CE WEST TO A SELECTED PPOINT

MOVE W THR IDPL@(PDMS) MOVES CE WEST TO A SELECT PLINE

MOVES THE CE IN A S 45 E DIRECTION BY 2000 ALONG THAT
MOVES 45 E WRT WORLD DIST 2000 DIRECTION (THE HYP LENGTH)
MOVES THE CE IN A S 45 E DIRECTION BY SOUTH 2000 (NOT
MOVES S 45 E WRT WORLD S 2000 THE HYP LENGTH)

NAME/TEMPORARY RENAMES ITEM TEMPORARY

COPIES FITT AT END POSITION OF CE AT A BANGLE OF 180
NEW FITT COPY PREV BY ZDIST PROP 1
START POSITION CE MIDDLE POSITION CE END POSITION
BANG 180 CE
NEW GLAB COPY $V1 COPIES GLAB AS VARIABLE $V1

NEW GLAB COPY PREV AT @ COPIES GLAB TO PICKED LOCATION

NEW PANE COPY PREV BY E200 COL 4
COPIES CE E200 COL 4
(PDMS)
TURNS HOLES ON
NEW PANE COPY PREV MOV TOW ID@DIST CREATES A NEW PANE AND MOVES IT TOWARDS A
1000 SELECTED ITEM RELATIVE TO BOTH ORIGINS

Page 7 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
NEW PNAE COPY PREV BY E200 COL 4
COPIES CE E 200 COL 4
(PDMS)
NEW SCTN COPY MOVE W WRT/* THR COPIES A NEW STRU AND MOVES IT WEST WRT TO CE AND
IDPL@(PDMS) TO A SELECTED PLINE
CREATES A COPY OF THE CURRENT PANE 200mm EAST OF
NEW SCTN COPY PREV BY E200 ITS CURRENT LOCATION

NEW SCTN COPY PREV BY E200 (PDMS) COPIES CE E200

NEW SCTN COPY PREV BY E200 COL 4

COPIES CE E200 COL 4
(PDMS)

NEW SCTN COPY PREV BY E200 WRT CE

COPIES E200 WRT CE AXIS
(PDMS)

NEW SCTN COPY PREV MIRRO PLA E THR

MIRROR COPIES CE ABOUT CO-ORDS ON A E DIRECTION
E118000 N118000 U26000 WRT/*(PDMS)
NEW STRU COPY PREV MOVE W WRTCE COPIES A NEW STRU AND MOVES IT WEST WRT TO CE AND
TO IDPL@ (PDMS) TO A SELECTED PLIN

NEW SYMB COPY PREV BY X-10 (DRAFT) COPIES CE X-10

NEW TEXP COPY PREV BY Y10 (DRAFT) COPIES CE Y10

NEW VRTX COPY PREV BY X10 (DRAFT) COPIES CE X10 (CLOUDS)

PIN DIR D WRT/* THR IDPL@ MOVES PIN1 DOWN TO A SELECTED PLINE

PIN1 AT PPLI BOS PROP .5 POSITIONS PIN1 AT MID POINT ON BOS PLINE

PIN1 BY D8 MOVES PIN1 DOWN 8mm

PIN1 DIR D POSITIONS PIN 1 DIRECTION DOWN

PIN1 DIR U WRT/* THR IDP@ MOVES PIN1 UP TO A SELECTED PPOINT

PIN2 DIR U WRT/* THR IDPL@ MOVES PIN2 DOWN TO A SELECTED PLINE

PIN6 OFF REMOVES PIN6

PIN6 OFF TURNS PIN6 OFF

PKEY LTOC CHANGES DIM FROM EXIST JUSL TO LTOC

POS PIN3 AT CE PLACES A PIN3 AT POS OF CE

PREC 4 DP GIVES PRECISE READOUT TO 4 DEC. POINTS

Q ANGLE (HVAC) RETURNS THE CURRENT ELEMENT ANGLE

Q ATT RETURNS THE CURRENT ELEMENT ATTRIBUTES

RETURNS THE CURRENT ELEMENT BETA ANGLE (IF IT HAS
Q BANG ONE)

Q BORE (PIPING) RETURNS THE PIPE BORE SIZE

RETURNS THE CURRENT ELEMENT CONNECTION
Q CREF REFERENCE (IF IT HAS ONE)
RETURNS THE CURRENT ELEMENT ACTUAL LENGTH
Q DER LEN (SCTNS, GEN SEC'S)
RETURNS THE CURRENT ELEMENT DESCRIPTION (IF IT HAS
Q DESC ONE)
RETURNS THE CURRENT ELEMENT DESIGN PARAMETERS
Q DESP (UNSET IF NONE SET)

Q DIR RETURNS THE DIRECTION

RETURNS THE DIRECTION OF THE CURRENT ELEMENTS
Q DRINSTA CUT PLANE AT ITS START
RETURNS THE DIRECTION OF THE CURRENT ELEMENTS
Q DRNEND CUT PLANE AT ITS END

QE RETURNS THE CURRENT ELEMENT EAST CO-ORDINATE

Q ELEM RETURNS THE CURRENT ELEMENT NAME

Page 8 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
 RETURNS THE RADIUS OF A PAVE BELOW PLOO BELOW
PANE
Q FRAD RETURNS THE RADIUS OF A VERT BELW NXTR BELOW
PANE
Q FUNC GIVES THE CE FUNCTION

Q FUNC RETURNS THE CURRENT ELEMENT FUNCTION

RETURNS THE CURRENT ELEMENT GENERIC TYPE eg W OR
Q GTYP HP
RETURNS THE HEIGHT AT PLOO LEVEL OF A PANE (PLATE
Q HEI THK)
RETURNS THE CURRENT ELEMENT HANGER HEAD CO-
Q HH (PIPE SUPPT) ORDINATES
RETURNS THE CURRENT ELEMENT HANGER TAIL CO-
Q HT (PIPE SUPPT) ORDINATES
RETURNS A PICKED PPOINT CO-ORDINATES WITH RESPECT
Q IDP @ WRT/* TO WORLD

Q INREF RETURNS THE CURRENT ELEMENT INTERFERENCE

RETURNS THE CURRENT ELEMENT INSULATION
Q ISPEC (PIPING) SPECIFICATION
RETURNS THE CURRENT ELEMENT JOINT LINE PLINE
Q JLINE SETTING
RETURNS THE CURRENT ELEMENT JUSTIFICATION LINE
Q JUST PLINE SETTING

Q LEV RETURNS THE CURRENT ELEMENT DRAWING LEVEL

RETURNS THE CURRENT ELEMENT ALLOWABLE MEMBER

Q LIST TYPES

Q LOCK RETURNS THE CURRENT ELEMENT LOCK STATUS

Q MATREF RETURNS THE CURRENT ELEMENT MATERIAL REFERENCE

Q MDB RETURNS THE CURRENT MDB NAME

Q MEM RETURNS THE CURRENT ELEMENT MEMBER'S LIST

RETURNS THE CURRENT ELEMENT MEMBER LINE PLINT
Q MEML SETTING
RETURNS THE CURRENT ELEMENT NAME WITH FORWARD
Q NAM SLASH
RETURNS THE CURRENT ELEMENT NAME WITHOUT
Q NAMN FORWARD SLASH

Q POSS GIVES THE CE START CO-ORDINATES

Q POSS POSE GIVES THE CE BOTH END CO-ORDINATES

Q PT (PIPING) GIVES THE CE PIPE TAIL ATTRIBUTES

Q RAD (HVAC) GIVES THE CE RADIUS

Q REF GIVES THE CE PDMS REFERENCE NO

Q REPRES GIVES THE CE REPRESENTATION STATUS

Q RRSF (DRAFT) GIVES THE CURRENT VIEW RULE SETTINGS

Q SIZE (DRAFT) GIVES THE VIEW O/ALL DIMENSIONS

Q SJUS GIVES THE PLOO JUSTIFICATION, ie UTOP, DCEN, DBOT

Q SNAP (DRAFT) GIVES THE SNAP SETTING (ON/OFF)

Q SPRE GIVES THE CE SPECIFICATION REFERENCE

Q STEXT GIVES THE PENETRATION IDENT AT ATTA

Q TCTLE OR (Q CUTL) GIVES THE CE CUT LENGTH

Page 9 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
 RETURNS THE CURRENT ELEMENT LENGTH REQUIRED TO
Q TCTLEN MAKE THE SCTN

Q THPOS (DRAFT) GIVES THE C/VIEW MATCHLINE CO-ORDS

Q TMRF (DRAFT) GIVES THE CE (SYMBOL) NAME

Q TPOS (DRAFT) GIVES THE CE PIPE TAIL CO-ORDS

Q TPT (DRAFT) GIVES THE STRA TAIL POINT CO-ORDS

Q TYPE GIVES THE CE TYPE ie SCTN, PANE

Q USER GIVES THE CE USER DATABASE

Q VLIMITS (DRAFT) GIVES THE VIEW LIMITS

Q VOL CE GIVES THE CE VOLUME

GIVES THE C/VIEW SCALE (ie 0.5)

0.5 = 1:2
0.2 = 1:5
0.1 = 1:10
Q VSCALE (DRAFT) 0.05 = 1:20
0.04 = 1:25
0.02 = 1:50
0.01 = 1:100

Q VTYP (DRAFT) GIVE THE VIEW ATT (ie GLOBAL HIDDEN)

Q XYPOS (DRAFT) GIVES THE VIEW POSITION ON SHEET

Q ZDIS GIVES THE CE FITTING DIST FROM START

RCODE RIGHT ROTATES THE VIEW OF ORI TO THE RIGHT

REFPRES HOLES ON ADDS HOLES REPRESENTATION

REFRESH REFRESHES THE SCREEN

REM CE REMOVES THE CURRENT ELEMENT FROM THE DRAWLIST

RENAME / XXX / YYY RENAMES CE TO YYY

REPRE PROF ON CL OFF SETS PROFILE REPRE-TIN. AS SOLID

REPRES DARC 1 SET ARC TOLERANCE TO 1 mm

REPRES DARC DEF SETS ARC TOLERANCE TO 10mm (DEFAULT)

REPRES HOLES OFF SAVES CHANGES CARRIED OUT AT THAT TIME

REPRES HOLES ON ADDS HOLES REPRESENTATION

REPRES OBSTRUCTION OFF TURNS HOLES OFF

REPRES PNODE COL YELLOW PRIMARY NODS SHOWN YELLOW

REPRES PNODE ON PRIMARY NODES SHOWN ONLY

REPRES PNODE SIZE 6 CHANGES PRIMARY NOTES TO 6mm

REPRES PROF ON CL OFF SETS PROFILE REPR AS SOLID

REPRES SNODE OFF SECONDARY NODES OFF

ROT ABO IDP@ BY 90 ROTATES CE LOCAL TO PPOINT BY 90 DEG

ROT ABO IDPL@ BY 90 ROTATES CE LOCAL TO PLINE BY 90 DEG

ROT ABO P1 BY 90 ROTATES CE ABOUT P1 BY 90 DEG

ROT ABO PPLIN TOS BY 15 ROTATES CE ABOUT PLINE TOS BY 15 DEG

ROT THR IDP@ BY 90 ROTATES CE ABOUT ANY PPOINT BY 90 DEG

ROT THR IDPL@ BY 90 ROTATES CE ABOUT ANY PLINE BY 90 DEG

ROT THR MIDP ABO D BY 90 ROTATES CE ABOUT MIDP POS BY 90 DEG

ROT THR POSE ABO D BY 30 ROTATES CE ABOUT END POS BY 30 DEG

ROT THR POSS ABO D BY 45 ROTATES CE ABOUT START POS BY 45 DEG

Page 10 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
ROT THR W10000 N 20000 U30000 ROTATES CE ABOUT CO-ORDS WRT TO WORLD ABOUT
WRT/*ABO U BY 90 VERT AXIS BY 90 DEG

ROT THRO MIDP ABO D BY 90 ROTATES CE ABOUT MIDP POS BY 90 DEG

ROT THRO POSS ABO D BY 45 ROTATES CE ABOUT START POS BY45 DEG

SAM LETS YOU TOGGLE BETWEEN LAST 2 ITEMS

SAVEWORK SAVES LATEST WORK

UNCLAIM ALL UNLOCKS ALL CLAIMED MEMBERS

UNLOCK ALL UN-LOCKS ALL ELEMENTS FROM THE DRAWLIST

UNM CE UNMARKS CE NAME

REMOVES THE CURRENT ELEMENT FROM THE GRAPHICAL
UNMAR CE VIEW

WITHIN VOL CE 500 COL 4 SET AT PS WITHIN A VOL OF +500 COL YELLOW

ZDIST (ZDIST + 100) MOVES ITEM 100 FROM ORIG POSITION

DRAFT QUERY COMMANDS

Q ADEG GIVES THE C/VIEW ANGLE (ie 90 DEG)

Q APOF GIVES THE CE (NOTE) TERMINATOR POS'N

Q BSFT GIVES THE DRG. SHT. REF. (STRU LVL)

Q CHEIGHT GIVES THE TEXT CHARACTER HEIGHT

Q CPOF GIVES THE CE (NOTE) LEADER LINE POS'N

Q DIR GIVES THE C/VIEW DIRECTION (ie N)

Q DPOS GIVES THE LDIM POSITION ON SHEET

Q DTER GIVES THE LAYER/LDIM TERM'TR DEFAULT

Q FPT GIVES THE STRA FROM POINT CO-ORDS

Q JUST GIVES THE C/VIEW JUSTIFICATION (ie LEFT)

Q LEN GIVES THE STRA LENGTH

Q LHEI GIVES THE TEST LETTER HEIGHT

Q LSHAPE GIVE THE LABEL LEADER LINE STATUS

Q LVIS GIVES THE CE VISIBILITY

Q MPT GIVES THE STRA MID POINT CO-ORDS

Q PKEY GIVES THE DIM PLINE STATUS (ie TCTF)

Q POS PLRF GIVES THE CORRECT VSEC CO-ORDS

Q RRSF GIVES THE CURRENT VIEW RULE SETTINGS

Q SIZE GIVES THE VIEW O/ALL DIMENSIONS

Q SNAP GIVES THE SNAP SETTINGS (ON/OFF)

Q THPOS GIVES THE C/VIEW MATCHLINE CO-ORDS

Q TMRF GIVES THE CE (SYMBOL) NAME

Q TPEN GIVES THE TEXP COLOUR ATTRIBUTES

Q TPT GIVES THE STRA TAIL POINT CO-ORDS

Q VLIMITS GIVES THE VIEW LIMITS

Q VRAT GIVES SCALE RATIO (ie 1 TO 245)

Q VSCALE GIVES THE C/VIEW SCALE (ie 0.5)

Q VTYP (DRAFT) GIVES THE VIEW ATT (ie GLOBAL HIDDEN)

Q XYPOS (DRAFT) GIVE THE VIEW POSITION ON SHEET

Page 11 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
DRAFT TYPED COMMANDS

ADEG 0 MODIFIES TEXT HORIZONTAL

ADEG 45 MODIFIES TEXT/PRIMITIVES AT 45 DEG

ADEG 90 MODIFIES TEST VERTICAL

APOFFSET 5-5 RE-POSITIONS LTR END X5 Y-5

AT @ MOVES CE TO NEW CURSOR POS

AT IDP@ MOVES CE TO SELECTED PPOINT

AT IDPL@ MOVES CE TO SELECTED PLINE

BLNK FALSE TEXT REMOVES BLANKED AREA BELOW

BLNK TRUE TEXT BLANKS ALL IT OVERLAYS

BTEST'A-A' MODIFIES TEXT TO A-A

BY @ MOVES CE BY LOCT FROM POS TO NEW POS

BY X100 MOVES CE X (EAST) 100mm

BY Y100 MOVES CE X (NORTH) 100mm

CPOFFSET 5-5 RE-POSITIONS LEADER LINE START X5 Y-5

DIM TEX'#100 TYP' DIMENSION TEXT READS 100 TYP

DPOS @ PLACES THE LDIM POSITION BY CURSOR

DTAN DEF DIMENSION TEXT DEFAULT

DTAN PAR DIMENSION TEXT PARALLEL

DTAN HOR DIMENSION TEXT HORIZONTAL

DTAN STAN DIMENSION TEXT STANDARD

DTAN VERTICAL DIMENSION TEXT VERTICAL

DTOF @ DIMENSION TEXT BY CURSOR

DTOF 0 4 DIMENSION TEXT OFFSET X0 Y4

DTAN PART DTOF 8 0 DIM TEXT PAR. & OFF X-8 Y0

NLPN OFF TURNS LINE OFF(ie CLOUD VERTEX)

FPT @ MOVES STRA FROM POINT BY CURSOR

FPT BY X2 Y-2 MOVES STRA FROM POINT BY TYPED INPUT

FRAME ON TEXT FRAME ON

GAP @ LETS CURSOR DETERMINE DIMENSION GAP

GAP DELETE ALL DELETES ALL DIMENSION GAPS

GAP DELETE AT DELETES DIMENSION GAP BY CURSOR

GBOX 5 MODIFIES TEXT FRAME WITH 5 CLEARANCE

HIGH CE HIGHLIGHTS CE

INCL CIRC 1 OF NOTE/TABLE REPOSITIONS CIRC 1 TO PREV. SELECTED DESTINATION

INCL NAME……… REPOSITION CE TO A SELECTED DESTINATION

LEAD STRA CHANGES LEADER LINE TO STRAIGHT

LEAD BENT @ PLACES ANOTHER VERTEX ON LEADERLINE

LVIS FALSE TURNS CE VISIBILITY OFF

LVIS TRUE TURNS CE VISIBILITY ON

LLEAD FALSE LEADERLINE OFF

LLEAD TRUE LEADER LINE ON

LTER OFF LINE TERMINATOR OFF

LTER ARR LINE TERMINATOR ARROW

Page 12 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
LTER DOT LINE TERMINATOR DOT

LTER OBL LINE TERMINATOR DASH

MODIFY @ ENABLES MODS TO SLAB/GLAB GEOMETRY

NEW CIRCL DIAM 100 AT@ DRAWS CIRCLE AND POSITIONS BY CURSOR

NEW CIRCL RAD 50 AT@ DRAWS CIRCLE AND POSITIONS BY CURSOR

NEW GLAB COPY $V1 COPIES GLAB AS VARIABLE $V1

NEW GLAB COPY PREV AT@ COPIES GLAB TO PICKED LOCATION

NEW RECT XLEN40 YLEN20 ANG 45 ORIG
DRAWS RECT AND POSITIONS IT BY CURSOR
CORNER AT @
NEW GLAB COPY PREV AT@ COPIES TEXT AND POSITIONS BY CURSOR

NLPN OFF TURNS LINE OFF(ie CLOUD VERTEX)

OSHT 10 DIM LINE OVERSHOOT 10mm

OSHT @ DIM LINE OVERSHOOT BY CURSOR

PLCL @ POSITION LEADER LINE BY CURSOR

PROJ CLEAR @ SETS PROJECTION LINE POSITIONS BY CURSOR

PROJ CLEAR 6 SETS PROJECTION LINE POSITION BY 5mm

PROJ TEX 'TYP' PROJECTION TEXT READS TYP

PTAN PAR PROJECTION TEXT PARALLEL

PTAN HOR PROJECTION TEXT HORIZONTAL

PTAN VERTICAL PROJECTION TEXT VERTICAL

PTOF -8 0 PROJECTION TEXT OFFSET X-8 Y0

RCOD LEFT ROTATES VIEW BOX LEFT

REPEAT 5 BY X10 COPIES CE 5 TIMES BY 10mm SPACES

SNAP ON/OFF TURNS SNAP ON/OFF

SNAP ON 10 GIVES SNAP GRID X10 Y10

SNAP ON SPACING X10 Y20 GIVES SNAP GRID X10 Y20

TPEN 71 GIVES THE TEXP COLOUR ATTRIBUTE 71

TPT @ MOVES STRA TO POINT BY CURSOR

TPE BY X2 Y-2 MOVES STR TO POINT BY TYPED INPUT

UPDATE ANNO UPDATES ANNOTATION

UPDATE DESIGN UPDATES DESIGN

UPDATE PICTURE UPDATES GRAPHICS

CGRID ON/OFF TURNS SNAP GRID VISIBILITY ON/OFF

#<SECTION A-A UNDERLINES TEXT ie SECTION A-A

#DEF DEFAULT DIMENSION ie 4500

#<#DIM #> UNDERLINES DIMENSION ie 4500

#<#DIM#>#/TYP UNDERLINES DIMENSION ie 45000

UNDERLINES DIMENSION ie TYP

WEST SHELL #< #> WEST SHELL

#SPRE (C10:19)UB FORMAT ON DRG. 254x102x22UB

#SPRE (C10:16)UB FORMAT ON DRG. 254x102UB

EL.#DIMPOSU (C2:5).#DIMPOSU(C6:) FORMAT ON DRG. EL.508.500

EL.+#DIMPOSU (C2:5).#DIMPOSU(C6:) FORMAT ON DRG. EL. +508.500

GLOSSARY

Page 13 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
 PIPE ATTACHMENT REQ'D FOR STRUCTURAL
ATTA PENETRATIONS THRO DECKS/WALLS, ETC

FITT STRUCTURAL FITTING

NBOX NEGATIVE BOX

NCON NEGATIVE CONE

NCYL NEGATIVE CYLINDER (BOLT HOLES ETC)

NDIS NEGATIVE DISH (VESSEL/PIPE CAP)

NCTO NEGATIVE TUBULAR RING (DOUGHNUT)

NRTO NEGATIVE RING SEGMENT (RECTANGULAR X-SECTION)

NSLC NEGATIVE CYLINDER (WITH DIAGONAL CUT)

NSNO NEGATIVE CONE (WITH OFFSET CAPABILITY)

NPYR NEGATIVE PYRAMID

NXTR NEGATIVE EXTRUSION/SHAPE (BOX/TRIANGULAR ETC)

PANE STRUCTURAL PLATE/GRATING SECTION

PAVE PPOINT OWNED BY PLOO

PENETRATION THRO' DECK OR WALL PLATE (PIPE
PFIT SLEEVE/ELECTRICAL TRANSIT, ETC)

PLOO PLATE OWNED BY PANE HAS PLATE ATTRIBUTES

SCTN STRUCTURAL SECTION ie, HEA, UNP, ETC

SJOI SNOD MEMBER USED IN CONNECTION SCTN

NODE POINT USED IN CONNECTING SCTN STRUCTURAL
SNOD SECTION ie HEA, UNP, ETC MEMBERS

VERT P POINTED OWNED BY NXTR

Page 14 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
TO COPY PIECE OF EQUIPMENT IN LAYOUT CREATE NEW EQUIP UNDER ZONE
Q POS OF EQUIP ,THEN CREATE OR TYPE NEW EQUIP AND MAKE POS SAME THEN NAM /FEET, VAR1NAM(ON BOX
1)VAR2NAM(ON
THEN NEW BOX BOX2)
COPY $V1,THEN ,NEW BOX COPY $V2

The best way to do this is to delete PS-9005 at stru level.

At stru level on PS-9004 type in NEW STRU COPY PREVIOUS and enter.
Then rename the new stru as PS-9005 including FRMW,SBFR,PNOD,ALL SCTNS,SUBS,BOX & PVOL.
same format at any other support but with it's own unique number ( PS-9005 ).
Then reposition to suit using by commands or co-ord's

to cut hole in beam

Typical Syntax is:
NEW FITT ZDIST 1000
NEW TMPL
NEW NBOX or NEW NCYL
XLEN 100 YLEN 100 ZLEN 100

inc.mac
Anywhere on your pc. If you put it in c:\temp then type $m/c:\temp\inc.mac

create an output file, edit it and run it back in. You can use Utilities>Db listing or type
File /c:\temp\supps.txt
OUTPUT CE (when you are at zone A)
TERM

Edit the file in Notepad wordpad etc. Will need to rename all named elements.

Navigate to zone B
$m/c:\temp\supps.txt

create gusset with polyline in AutoCAD after that i use list command, autocad generated the coordinate of gusset in X, Y coordinate,

Page 15 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
gridlines
Click "Utilities" on Structural design menu, then select "Constructs", 3D Aid Construct" form wiil come out, on this form select menu
nornally we use linear type

q evar pmllib
Q ALL STRU WI MATCHWILD(NAME,'*S0114*')
map build mdb (if there are problems in draft)(type in design)

TO MOVE OR COPY A SLOPING BEAM RELATIVE TO ANGLE TYPE CE IN THE WRT BOX

Page 16 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
 Page 17 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
 Page 18 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
 Page 19 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
 Page 20 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
 Page 21 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
 Page 22 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
 Page 23 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
 Page 24 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
 Page 25 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
 Page 26 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
PDMS Directions - Including Sloping Lines

DIR N Direct North

DIR N 45 Direct North

DIR N 45 E Direct North 45 deg East

DIR N 45 E 30 Direct North 45mm and East 30mm

DIR N 45 E 30 D Direct North 45 deg East 30 deg Down

DIR N 45 E 30 D 10 Direct North 45mm East 30mm and Down 10mm

DIR S 30 E Direct South 30 deg E

DIR E 60 S Direct South 30 deg E

DIR N 100 D 1 Direct North with 1 in 100 slope

DIR N 0.5729 D Direct North with 1 in 100 slope

DIR N 2300 D 23 Direct North with 1 in 100 slope

DIR N 50 D 1 Direct North with 1 in 50 slope

DIR N 01.1458 D Direct North with 1 in 50 slope

DIR N 2300 D 46 Direct North with 1 in 50 slope

======================================================================

Some simple PDMS Commands

Q MEM query members of current element

Q ATT query attributes of current element
NEW TEE CHOO ALL select a new tee from the spec of the branch at the current bore
CONN connect - orientate the current element and position arrive ppoint at leave ppoint of previous component
CONN AND P3 IS W connect and orientate the current element so that ppoint 3 is facing west
ORI AND P3 IS W orientate the current element so that ppoint 3 is facing west without changing its position
BACK swith to backwards modelling mode
FORW switch to forwards modelling mode
DIR E direct the leave ppoint east (mainly used for elbows and bends)
DIR TO NEX direct the leave ppoint towards the origin of the next component (mainly used for elbows and bends)
CONN PT TO LAST MEM connects the tail of the current branch to the last member of the branch (must be sat at branch level)
CONN PH TO FIRST MEM connects the head to the first member of the branch (must be sat at branch level)
CONN PH TO PT OF ID BRAN @ connect the head of the current branch to the tail of a cursor identified branch
DIST 1000 slide the current element along from the previous component until the distance from p0 to p0 is 1000
BY E300 slide the current element along 300mm from its current position in the east direction
THRO N12300 slide the current element along from the previous component until the p0 reaches N12300
PLAN E THR E23400 slide the current element along in non-orthogonal plane from the previous component until the p0 reaches E23400
PLAN E DIST 1000 slide the current element along in a non-orthogonal plane until the difference in eastings from the previous comp is 1000
BOP ONTOP ID SCTN @ slide the current element (elbo) until the BOP rests on top of the identified SCTN
BOP 100 ONTOP ID SCTN @ slide the current element (elbo) until the BOP is 100mm above the top of the identified SCTN
SEL HSTU select the tube for the start of the branch (if the branch is unconnected and starts with pipe)
SAVEWORK save changes from current session
GETWORK reloads databases to see changes others have made since start of your session
CHECK BRAN performs data consistency check on current branch
CHECK PIPE performs data consistency check on current pipe
Q POS query position of current element with respect to its owner
Q POS IN WORL query position of current element with respect to the world
Q POS IN NEXT query position of current element with respect to next component
Q PH query branch head details - HPOS, HBOR, HDIR, HCON
Q PT query branch tail details - TPOS, TBOR, TDIR, TCON
Q HREF query branch head reference - ie. Name of item that branch head is connected to
Q TREF query branch talil reference - ie name of item that branch tail is connected to
FLIP CONN flip the current element (so that the ppoint that was the arrive is now the leave) and reconnect it
ARR 3 make the p3 of current element (usually Tee) the arrive ppoint
LEA 3 make the p3 of current element (usually Tee) the leave ppoint
ANG 0 CONN set the angle to zero and connect to the previous item (used for items with different default angles)
ADD ALL WITHIN VOL CE 1000 add all items to the view which are in the box that encloses the volume of the current element +1000mm
MA CE marks CE with its name
UNMARK CE removes mark fro CE
UNMARK ALL removes all marks
to mitre end of member

find member setout by clicking display axes top icon under Query

q att and find

then type depending on direction and angle of mitre

to create MTO
UTILS
REPORTS
RUN
C:\AVEVA\Pdms11.6.SP3\pdmsui\reports\templates
PRESS OK THEN BOX COMES

to delete non required NODES from a subframe

firstly hilight subframe then find file delnodes.txt using $m/c:/delnodes.txt

TO MOVE MEMBERS FROM ONE SUBFRAME TO ANOTHER incl id@

to find out info on pplin's q idpl@

to find out which user ran original pipework q userm

to find out which user last modified pipework q lastm

to mark database before changing items markdb 'before'

to copy selected sctn up by 100 new sctn copy pre by u100

to copy a site or zone or structure to another area

you need to create a text output file
to do this hilight the zone or struct you wish to copy then choose Utilities -DB Listings from top menu
change filename to say c:\les1.txt and choose ADD CE
then ok
edit the file in notepad to modify any possible new duplicate names
and top of file change the line to ONERROR CONTINUE
then in PDMS move to heirachy where u want new structure etc… and on command line type $m/ c:les.txt

OR if that doesn’t work

save the file into your PDMS output directory
(to check what the directory is type Q EVAR PDMSUSER
then at command line type $m/%PDMSUSER%/111.txt where 111.txt is the new filename (edite

to add everything within 2000mm of the current element add all within vol ce 2000

to move item from one zone to another

hilight item to be moved and type var1nam
move to required location in heirachy and type include $v1

to search for kit with the name Axes Q ALL WI MATCHWILD(NAME,'*AXES

or search for stru name containing the name Axes Q ALL STRU WI MATCHWILD(NAME,
 to add an element with transparrency and other colour ADD CE COL 2 TRANSL 25
this command adds current element red transparrency 25%

to add sites with name SITE 11……. $m/%pdmsuser%/addsites.txt

the addsites.txt file must reside in your pdms default directory
file consists of following text
var !sites collect all site wi substring(name,1,3) eq '/11' see also word docs…
var !sname eval name for all from !sites
do !i to !sname.size()
add $!sname[$!i]
enddo
$.

9/10 to remove a list of sites you don’t need $m/%pdmsuser%/strip.txt

create a txt file called STRIP.TXT in your pdms default dir
file consists of following
rem all site wi match(name, 'AXES') neq 0
rem all site wi match(name, 'AXIS') neq 0
rem all site wi match(name, 'TEST') neq 0
rem all site wi match(name, 'GRIDLINES') neq 0
rem all site wi match(name, '11GA-UMB-APG') neq 0
REM ALL SITE WI MATCH(NAME, '11GA-UMB-APK') NEQ 0

rename the names in ' ... ' to suit your project names

to create kicker flats around holes

create the hole using Create>Fitting>Single
and choose Hole Penetrations as shown

then hilight the newly created PFIT in the Design

Explorer window and type Q ATT

Change the Desperam numbers

first number is radius
change others numbers to see mods to hole

100 = hole dia

8 = thickness
if thickness is 0 then it makes a clean hole

makes a 100mm dia hole

 then pick members to move (make sure your CE is the destination subframe)

markdb 'before'

new sctn copy pre by u100

es -DB Listings from top menu

d on command line type $m/ c:les.txt

where 111.txt is the new filename (edited)

add all within vol ce 2000

include $v1

Q ALL WI MATCHWILD(NAME,'*AXES*')

Q ALL STRU WI MATCHWILD(NAME,'*AXES*')

ADD CE COL 2 TRANSL 25

$m/%pdmsuser%/addsites.txt

see also word docs…

$m/%pdmsuser%/strip.txt

basically the match command looks at the name of the site for the occurance of the
string 'AXES' if it doesn't find this string it returns a value of Zero if it does then it returns
a number corresponding to where it finds the string in the character name ie if a site is
called /SAM-AXES-99 it will return the value 5 so as 5 is neq (not equal to) zero it
removes it from the view.
PDMS DRAFT NOTES

COMMANS DESCRIPTION
ADEG - ROTATION OF TEXT
CHEIGHT - SIZE OF TEXT
TPEN - COLOUR OF TEXT
LFRA - TEXT BOX/TRUE OR FALSE = ON OR OFF
LLEAD - TEXT LEADER / TRUE OR FLASE = ON OR OFF
AT@ - WHEN TEXT ELEMENT CANNOT BE SEEN
VAR1NAM - FOR COPY TEXT FROM REFERENCE DRAWING
NEW GLAB COPY V1 ON ID @ - TO FINALISE THE TRANSFER OF COPIED TEXT (ABOVE)
SORF NULREF DELETE GLAB - DELETED LABEL
LLCL - LEADER LINE CLEARANCE
NEW GLAB COPY PRE ON ID@ - COPY TAG FROM SAME VIEW

(MODIFY DM TEXT IN FORMS) (- CAN INCORPORATE NORHINGS ON 2ND LINE)

Q A TEXT = FOR SLABS TO CHANGE CONTENT - NEED TO PUT ('ATEXT')
Q B TEXT = FOR GLABS TO CHANGE CONTENT - NEED TO PUT ('B TEXT')

TO COPY FROM VNOTE - VARINAM/THEN (INCL $V1) ON THE SELECTED VNOTE

(VARINAM) THE VNOTE YOU SELECTED AND $V2 TO TAKE SHORTCUT TO ELEMENT
Q NLPN = NOTELINEPEN FOR PIPERACK VIEW PORTS

TO GIVE LABEL SECOND (I.E.(LABEL) Q BTEXT THEN GET # EQUI(C2:) NOW ADD
LABEL
#EQUI(C2:)#/(TEXT)' THN ALIGN HB TO GIVE EQUAL BOTH SIDES OF LEADERLINE

BASE - TO GIVE DIRECT ON BASE

BB - BOTTOM BODY
TB - TOP BODY
Q - L SPAC TO CHANGE SPACE BETWEEN (HB) 2 TEXTS

DRAFT

WHEN REMOVING A FRAM FROM VIEW AND PART WILL NOT REMOVE SELECT VIEW THEN:
MODIFY VIEW
SECTION FLAT
CHANGE WORLD POS BY 1 UNIT IN REQUIRED DIRECTION
SPPLY THEN UPDATE DESIGN
TO REMOVE ALL LINES IN A VIEW FO TO ? NOTE AND TYPE LVIS_FAL

------------------------------------

WHEN YOU CANT READ THE LONG LINES IN DRAW LIST MANAGER SEE BELOW

SOLUTION.

AT THE COMMAND LIN

GOTO IDLN
Q DESC

THE SAME LIST WILL A

Q HISTORY TO FIND NUMBER THEN Q SESSUSER 6456 OR Q SESSDATE 6456
for fireproofing:create fitting single then apply fireproofing
to copy fireproofing see below
to copy fitt to all in list var1 nam then in list

Page 69 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
NEW SCTN COPY PREV MOVE S 45 W WRT WORLD NEW SCTN COPY PREV MOVE N 45 W WRT WORLD
DIST 635 DIST 635

Page 70 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
Q ALL STRU WI MATCHWILD(NAME,'*S0114*')

Page 71 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
how to create this sorta pipe by Bob Din

Firstly get the coordinate of the pipe start point !!

Under a piping zone.
Type in the command line
NEW PIPE NAM /XXXX
NEW BRAN NAM /XXXX/B1
HPOS E2000 N3275 U1000 WRT/* change these coordinates to suit your pipe start location
HDIR S (head direction..south?)
HBOR 200 (bore of pipe at head)
still in the command box.
NEW ELB CHOO ALL
(select the elbow)
FCONN
(This will connect it to the pipe head)
DIR E 45U
(Directs the elbow)
NEW ELB COPY PRE
(Copies the last elbow)
CONN
(connects to last elbow)
Dist 200 (Or whatever distance you need) could also try PLAN U THR ID@ (Then click on the primitive)…(2nd elbow on the screen shot)
DIR E (Directs the leave of the elbow East.
NEW FLAN CHOO ALL
(Select the flange)
CONN
PLAN E THR ID @
(Click on the flange made of primitives)
NEW GASK CHOO ALL
(Select the gasket)
CONN
NEW FLAN CHOO ALL
(Select the flange)
CONN
NEW ELB CHOO ALL
(select the elbow)
CONN
PLAN E THR ID @
(Click on the elbow made of primitives)
DIR E
NEW WELD CHOO ALL
(Select the weld)
CONN
DIST 2000 (or whatever)
BRAN
CONN PT TO LAST MEM
to remove the dotted line

CONN PT TO LAST MEM

Connect pipe tail to last member, or if its at the head

CONN PH TO FIRST MEM

Guessing that’s the Pipe Head.

If you are in forwards mode.

Click on the atta

BAC
PLAN S THR CE
ORI
FOR
BRAN
CONN PH TO FIRST MEM
Searching for Multi Named Steel (SDNFEMARK)
Utilities……..Quick Reports

Using MATCHWILD is a wildcard search for all (SCTN) named multi members with MS7197 in name. (ie the SDNFEMAR
Run the report
The result appears in the command window

Copy and paste the reference number of the member into the command line and type add before it to add to screen.

Page 84 of 115
D:\Docstoc\Working\pdf\4af55f35-6829-4632-b258-c39fe09bfbd2.xls Printed:
YOU MUST HAVE A COPY OF NAVISWORKS REVIEW !!

EXPORT FILE /c:\les\review.rvm OVER

EXPORT ALL SITE WI PURP INSET ('PIPE','SUPP','CONC','ELEC','INFR','HVAC','INST','MECH','STL','STLE','TRAN','GEN')

EXPORT ALL ZONE WI MATCHWILD(NAME,'*/AP2*T')
EXPORT ALL ZONE WI MATCHWILD(NAME,'*/AP2*E')
--EXPORT EXCLUDE ALL SITE WI MATCHWILD(NAME,'/A?2')
$* Transfer design data to model file.
EXPORT FINISH

or u can type EXPORT CE when at any tree level just to export specific stuff

=================================================================

first create a run.rvm file

REPRE LEV PIPE 6

Representation level NOZZ 4
Representation level STRU 6
REPRE INSU ON

EXPORT FILE /%PDMSUSER%/REVIEW.rvm OVER

EXPORT HOLES ON

EXPORT AUTOCOLOUR ON
--reset all autocolour rules.
EXPORT AUTOCOLOUR RESET

--change number 61 to suit your project numbers

export all zone wi matchwild(name,'*AAF*') col3
export all site wi matchwild(name,'*61*') col 5
EXPORT EXCLUDE ALL SITE WI MATCHWILD(NAME,'*AXES*')
EXPORT EXCLUDE ALL SITE WI MATCHWILD(NAME,'*UNDERGROUND*')
EXPORT EXCLUDE ALL SITE WI MATCHWILD(NAME,'*OPTION*')
EXPORT EXCLUDE ALL SITE WI MATCHWILD(NAME,'*PILES*')
EXPORT EXCLUDE ALL SITE WI MATCHWILD(NAME,'*???TEST*')
EXPORT AUTOCOLOUR ALL PIPE COL 15
EXPORT AUTOCOLOUR ALL EQUI COL 2
EXPORT AUTOCOLOUR ALL STRU COL 21

run the file in pdms as $m/%pdmsuser%/run.rvm

assuming the file is located in the default pdms user directory

open REVIEW.rvm file with Navisworks REVIEW software

then save it as a .NWD file for others to view in roamer etc…

easy peasy
AAF Colours

Colour Ref Colour

1 grey colours dependent on setup

2 red modify to suit your system
3 orange
4 yellow
5 green
6 cyan
7 dk blue
8 pink
9 maroon
10 white
11 lt pink
12 violet

syntax :- add ce col4 transl 30 gives translucency of 30

GLOSSARY

ATTA Pipe attachment required for structural penetrations thro decks /walls etc

FITT Structural fitting

NBOX Negative box

NCON Negative cone

NCYL Negative cylinder bolt holes etc

NDIS Negative dish vessel/pipe cap

NCTO Negative tubular ring donut

NRTO Negative ring segment rectangular x-section

NSLC Negative cylinder with diagonal cut

NSNO Negative cone with offset capability

NPYR Negative pyramid

NXTR Negative extrusion / shape

PANE Structural Panel / plate / grating section

PAVE P Point owned by PLOO

PFIT Penetration thro deck or wall plate pipe sleeve / elec transit etc

PLOO Plate owned by Pane has plate attributes

SCTN Structural Section

SJOI Snod member used in connecting SCTN

SNOD Node point used in connecting SCTN members

VERT P Point owned by NXTR

Download cladding.zip from www.arrles.co.uk\\ (yet to be uploaded )
this file contains 3 additional files crcladding.pmlfrm , cladding.plt and leslogo.png
save these files into your //pmllib/design/forms directory

then type PML REHASH ALL at the command line

then type or paste the following q var !!pml.getpathname('crcladding.pmlfrm')

it should return the directory location of the added 3 files mentioned above

check that a file called pml.index has been created in your pmllib directory
hopefully it has

on the command line now type show !!crcladding

this should now bring up a dialogue box

set name

click on ID Element and click an

element to get co-ordinates

add dimensions to suit panel red'q

zero dims give straight lines

copy dims into form from an

existing panel

this is me !

apply to create panel

lfrm , cladding.plt and leslogo.png

e('crcladding.pmlfrm')