Daphne Alpha Screw 32: Lubricant Product Information
Daphne Alpha Screw 32: Lubricant Product Information
Daphne Alpha Screw 32: Lubricant Product Information
Daphne Alpha Screw 32 is a synthetic type compressor lubricant manufactured from synthetic base
oil with special high thermal stability additive, anti-oxidant, anti-copper corrosion additives and anti-
rust additive. This combination produces super long life synthetic compressor oil that has excellent
thermal stability and anti-sludge properties.
Application
Specially formulated for use in oil-cooled air compressors. With air compressors becoming more
compact, higher pressure, cleaner air requirements and longer maintenance interval, Daphne Alpha
Screw 32 is specially recommended for it meets all this requirements.
Characteristic
Excellent High Thermal Stability - Combination of synthetic base oil and special oxidation inhibitor
improves service life and prevent abnormal deterioration under high temperature.
Special Copper Corrosion Inhibitor - Copper corrosion inhibitor works to extend the oil life by
preventing the oil from deteriorating and turning green due to oxidation of copper.
Excellent Anti-Corrosion & Anti-Rust Properties - Effective rust preventive agent and corrosion
inhibitor prevent oxidation and corrosion of rotor and receiver side caused by water and acid
produced through deterioration process.
High Viscosity Index And Low Pour Point - Enables excellent start up event at low temperature.
Packing
The information provided is to our best knowledge, true & accurate, subjected to change without notification due to continual product research and
development. All recommendations or suggestions are without guarantee since the conditions of use are beyond our control. The manufacturers do
not accept liability for any loss or damage, however arising, which results directly from the use of such information, nor do we offer any warranty of
immunity against patent infringement.
D4090499
Lubricant Product Information
TYPE OF
METHOD
Colour ASTM D-1500 L1.0
Density 15 oC g/cm3 ASTM D-4052 0.8422
Flash Point (COC) oC ASTM D-92 234
Viscosity, cSt @ 40 oC ASTM D-445 32.03
@ 100 oC 5.547
Viscosity Index ASTM D-2270 110
Pour Point oC ASTM D-6749 Below -50oC
TAN (mgKOH/g) ASTM D-974 0.08
Emulsion Characteristics ASTM D-1401 40-40-0 (10)
@ 54oC
Foaming, ml ASTM D-892
@ 24oC 10> - 0
@ 93.5oC 10> - 0
@ 93.5oC to 24oC 10> - 0
Rust Preventive Test, ASTM D-665 Pass
Procedure A 24 Hrs
Rotary Bomb Oxidation Test ASTM D-2272 5000
150oC Min
Thermal Stability - Pass
@170oC x 24 Hrs
The information provided is to our best knowledge, true & accurate, subjected to change without notification due to continual product research and
development. All recommendations or suggestions are without guarantee since the conditions of use are beyond our control. The manufacturers do
not accept liability for any loss or damage, however arising, which results directly from the use of such information, nor do we offer any warranty of
immunity against patent infringement.
D4090499