Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 37 views

    Enabling Web/HTTP Statistic Collection: Procedure

    Uploaded by

    Erivelto Oliveira
    To enable statistics collection in JBoss EAP 7.x and WildFly 8-10, administrators must: 1) Use the JBoss CLI to check the current value of the "statistics-enabled" attribute for various subsystems and data sources. 2) Use the CLI to set the "statistics-enabled" attribute to true for required subsystems and data sources. 3) Restart the JBoss server for the changes to take effect.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Enabling Web/HTTP Statistic Collection: Procedure

    Uploaded by

    Erivelto Oliveira
    37 views3 pages
    To enable statistics collection in JBoss EAP 7.x and WildFly 8-10, administrators must: 1) Use the JBoss CLI to check the current value of the "statistics-enabled" attribute for various subsystems and data sources. 2) Use the CLI to set the "statistics-enabled" attribute to true for required subsystems and data sources. 3) Restart the JBoss server for the changes to take effect.

    Original Title

    JBoss_Enabling_Statistic_Collection

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    To enable statistics collection in JBoss EAP 7.x and WildFly 8-10, administrators must: 1) Use the JBoss CLI to check the current value of the "statistics-enabled" attribute for various subsystems and data sources. 2) Use the CLI to set the "statistics-enabled" attribute to true for required subsystems and data sources. 3) Restart the JBoss server for the changes to take effect.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    37 views3 pages

    Enabling Web/HTTP Statistic Collection: Procedure

    Uploaded by

    Erivelto Oliveira
    To enable statistics collection in JBoss EAP 7.x and WildFly 8-10, administrators must: 1) Use the JBoss CLI to check the current value of the "statistics-enabled" attribute for various subsystems and data sources. 2) Use the CLI to set the "statistics-enabled" attribute to true for required subsystems and data sources. 3) Restart the JBoss server for the changes to take effect.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Enabling Web/HTTP Statistic Collection

    Before the JBoss agent can gather JBoss server web metrics and other subsystem metrics,
    statistics collection must be enabled for each subsystem. This procedure is for JBoss EAP version
    7.x and WildFly versions 8.x, 9.x and 10.x.

    Procedure
    The statistics-enabled attribute of various JBoss subsystems controls statistic collection. This
    setting can be viewed and updated by using the JBoss command line interface.

    Note

    This procedure is for JBoss EAP version 7.x and WildFly versions 8.x, 9.x and 10.x.

    1. Go to the binary or bin directory under the JBoss server installation directory.

    2. Start the JBoss command line interface.

    ./jboss-cli.sh --connect [--controller=IP:port]

    jboss-cli.bat --connect [--controller=IP:port]


    where IP is the JBoss server's IP address and port is the JBoss server's port. For example,
    192.168.10.20:9990.

    Tip

    If the connection attempt results in the error, “Failed to connect to the


    controller: The controller is not available at localhost:9990:
    java.net.ConnectException: WFLYPRT0053: Could not connect to http-
    remoting://localhost:9990. The connection failed: WFLYPRT0053: Could
    not connect to http-remoting://localhost:9990. The connection failed:
    Connection refused”, use the --controller parameter.
    This error indicates that the management server is not listening on the localhost IP
    address (127.0.0.1) and is configured to listen on the computer's IP address.
    3. Run the following commands to view the current state of each subsystem's statistics-enabled
    attribute:

    Note

    If JBoss is running in Domain Mode, each command must be prefixed with the associated
    profile and these commands must be run for each monitored profile. For example:
    /profile=full/subsystem=ejb3:read-attribute(name=statistics-enabled)

    /subsystem=ejb3:read-attribute(name=enable-statistics)

    /subsystem=transactions:read-attribute(name=statistics-enabled)

    /subsystem=undertow:read-attribute(name=statistics-enabled)

    /subsystem=webservices:read-attribute(name=statistics-enabled)

    /subsystem=datasources/data-source=Data_Source_Name:read-
    attribute(name=statistics-enabled)

    /subsystem=datasources/data-source=Data_Source_Name/statistics=pool:read-
    attribute(name=statistics-enabled)

    /subsystem=datasources/data-source=Data_Source_Name/statistics=jdbc:read-
    attribute(name=statistics-enabled)

    where Data_Source_Name is the name of a data source that is configured for use with JBoss.

    Note

    Data sources can be listed by using the command /subsystem=datasources:read-


    resource.

    Example result when statistics are not enabled:


    {
    "outcome" => "success",
    "result" => false
    }

    4. Run the following command to change the value of each subsystem's statistics-enabled
    attribute to true:
    /subsystem=ejb3:write-attribute(name=enable-statistics, value=true)

    /subsystem=transactions:write-attribute(name=statistics-enabled,value=true)

    /subsystem=undertow:write-attribute(name=statistics-enabled,value=true)

    /subsystem=webservices:write-attribute(name=statistics-enabled,value=true)

    /subsystem=datasources/data-source=Data_Source_Name:write-
    attribute(name=statistics-enabled,value=true)

    /subsystem=datasources/data-source=Data_Source_Name/statistics=pool:write-
    attribute(name=statistics-enabled,value=true)

    /subsystem=datasources/data-source=Data_Source_Name/statistics=jdbc:write-
    attribute(name=statistics-enabled,value=true)

    Example result when you enable statistics for a subsystem:


    {
    "outcome" => "success",
    "response-headers" => {
    "operation-requires-reload" => true,
    "process-state" => "reload-required"
    }
    }

    5. Exit the JBoss command line interface.

    6. Restart the JBoss server.

    Note

    Any currently running JBoss agents with transaction tracking enabled must be restarted.

    Parent topic:
     Configuring JBoss monitoring

    You might also like