Goyenchem UV-700 - 218 N3.14 TĐ PDF

Product name: GOYENCHEMUV-700 Page 1/5
GO YEN Chemical.,Material Safety Data Sheet
GO YEN CHEMICAL INDUSTRIAL CO.,LTD.

MATERIAL SAFETY DATA SHEET
SECTION 1 – PRODUCT AND COMPANY INFORMATION
PRODUCT NAME : GOYENCHEMUV-700
SYNONYMS：Nanometer high-effective UV block additives, anti-aging additives
DATE PREPARED: FEB. 7, 2013
TRADE NAME(S): GOYENCHEMUV-700
COMPANY NAME: GO YEN CHEMICAL INDUSTRIAL CO., LTD. (GYC Group)
MANUFACTURER ADDRESS:
NO. 39, SHING YEH ST. LIN HAI INDUSTRIAL AREA KAOHSIUNG, TAIWAN.
CONTACT TELEPHONE NUMBER: +886-7-2272766.
CONTACT FAX NUMBER: +886-7-2272768.
SECTION 2 – COMPOSITION/INFORMATION ON INGREDIENTS
INGREDIENT % CAS NO.

 Nanometer high-effective UV block 27%-45% 25973-55-1
 Anti-aging catalyst 9%-15% 101-87-1
 Special stabilizer 24%-40% 52829-07-9
SECTION 3 – HAZARDS IDENTIFICATION
ROUTES OF ENTRY Inhalation: Yes, Skin Contact: Yes, Ingestion: Yes

ENVIRONMENTAL AND REGULATORY REPORTING：---
PHYSICIAL AND CHEMICAL DAMAGES: ---
FIRE HAZARDS: None (Basically the product itself belongs to good fire-resistance and is
regarded as fire-resistant application. No need to worry about fire or reaction.)
SECTION 4 –FIRST AID MEASURES
FIRST AID
-Immediately flush with plenty of water for 15 minutes at least.
EYE
-If still feel uneasy, hold eyelids apart and get medical attention ASAP.
CONTACT
-If with contact lenses and easy to remove, remove them ASAP.
SKIN
-Immediately wash with plenty of water & with soap as soon as available.
CONTACT
IN CASE -Immediately remove patient to fresh air.

INHALED -If breathing is difficult, give oxygen and get medical attention ASAP.
-Support to induce vomit and provide water or warm water to rinse the
IN CASE
mouth immediately.
SWALLOWED
-If still feel uneasy, get medical attention ASAP.
SECTION 5– FIRE AND EXPLOSION DATA
EXTINGUISHING MEDIA: Not combustible. Use dry chemical, carbon dioxide, foam, cool
in water fog.
SPECIAL FIRE FIGHTING PROCEDURE:
1. The materials belong to be not combustible.
2. Please do not enter the fire scene if personnel without suitable protection.
3. The fireman should keep within safe distance from fire scene.
4. Use water to cool the airtight container for avoiding & causing the exploration of the
airtight container because high temperatures result to high pressure.
5. Be careful to use liquid fire-extinguishing agent for avoiding the detonation due to water
vapor
6. If spilled materials inflow sewer and the public water pipeline, have to inform the related
section to process.
SECTION 6–ACCIDENTAL RELEASE MEASURES
STEPS TO BE TAKEN IN THE EVENT OF A SPILL OR DISCHARGE:
Suggest to pave some granular sand for prevent the personnel from slip.
WASTE GAS PROCESSING METHODS：When few divulge, dry by the dry cloth; when
massively divulged, use vessel to recycle as far as possible. The materials after recycling
should be carried to incinerate in the suitable & legitimate place through the permit of the
gov’t organization or treat through legitimate companies.
SECTION 7–HANDING AND STORAGE

THE VENTILATION SYSTEM:
The ventilation system conforms to the general & comfortable requirement. It is not
necessary to use special ventilation system.
ATTENTION WHEN HANDLE OR STORE
1. Easy to deliquesce. Suggest to fill the storage tank by dry nitrogen or the air of low dew
point.
2. The tank should keep seal and avoid pollute; the ideal storage temperature is 20-32℃.
3. The storage vessels should be made the clear note. Before sending for maintain, the
storage vessel should be thoroughly cleaned and spray by the staffs that wear
protection equipment.
SECTION 8–EXPOSURE CONTROLS/PERSONAL PROTECTION
THE PARAMETERS OF CONTROL :
1. The average permit consistency of 8 hours daytime/The average permit consistency of
short time/The average permit consistency of maximum：3300ppm
2. Biological indicator：Take over LD50:2.8ml/kg (big mouse test)
PERSONAL PROTECTION EQUIPMENT : .
Wear safety glasses or goggles or face guard; wear the contact

Eye/Face Protection
lenses is prohibited.
In ventilates place, the general operation does not have to wear

Respiratory Protection
mask
The general operation does not have to wear protection

Skin Protection
equipment
Others Install flushes equipment in exposed zone for emergency
Personal Hygiene Wash hands and shower by the neutral soap after handing
SECTION 9–PHYSICAL AND CHEMICAL PROPERTIES
Appearance : White Powder
Compatibility(resin, polymer): excellent

Solubility: Insoluble
solubility
Water solubility: N/A
Average particle size: N/A
SECTION 10–STABILITY AND REACTIVITY
Stable  Conditions to avoid : to be heated, fire

Stability Hazardous Decomposition :
Unstable
Carbon monoxide and other toxic gas
Hazardous May occur

Conditions to avoid : ---
polymerization Will not occur 
Incompatibility Conditions to avoid : Avoids the moisture contact
SECTION 11–TOXICOLOGICALTY INFORMATION
Acute Toxicity : Non-toxic
Partial effect : None
Allergic reaction : Skin and eyes direct contact may cause irritation
SECTION 12–ECOLOGICALTY INFORMATION

The possible environmental effect/environment to disseminate :
1. No toxic to aquatics 2. Dropping with rain in the air or absorbing on particle to disperse
SECTION 13–DISPOSAL CONSIDERATIONS

Regards this material as industrial reject, according to the relate laws and regulations make
cremation process.
SECTION 14–TRANSPORT INFORMATION
International transportation regulations : IATA/ICAO Not restricted
UN Code : ---
Local transportation regulations : Road traffic safety rule 84th
Special transportation method & matters needing attention : ---
SECTION 15–REGULATORY INFORMATION

Suitable regulatory: Laborer safety sanitation rules, The danger and harmful identify rules,
The prevention rule of organic solvent poison, The permit concentration standard of harmful
in the air for Laborer work environment, Road traffic safety rules, The store & purge process
method and standard facilities for undertaking reject.
SECTION 16–OTHER INFORMATION
Name : GO YEN CHEMICAL INDUSTRIAL CO ,LTD(GYC Group)
Address : No.39, Shing Yeh ST., Lin Hai Industrial Area, Kaohsiung,
Tabulation Unit
Taiwan
Telephone : +886-7-227-2766
Tabulation date : FEB. 7, 2013
＊ This material safety data sheet is for the product which indicates provides, if this product
mix uses with other raw material then the provide content of this material safety data
sheet no longer will be suitable.
＊ GO YEN CHEMICAL (GYC) provides the information contained herein in good faith but
makes no representation as to its comprehensiveness or accuracy. This document is
intended only as a guide to the appropriate precautionary handling of the material by a
properly trained person using this product. Individuals receiving the information must
exercise their independent judgment in determining its appropriateness for a particular
purpose.
＊ This material safety data sheet is internal matter and the security document which the
GYC related cooperate factory or the distributor uses, the technical supplier (GGK
industrial Co.,) has the intellectual property rights, this data for technical use can not
plagiarize, reprint or without authorization reprinting.
http://www.goyenchemical.com

Goyenchem UV-700 - 218 N3.14 TĐ PDF

Uploaded by

Copyright:

Available Formats

Goyenchem UV-700 - 218 N3.14 TĐ PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Goyenchem UV-700 - 218 N3.14 TĐ PDF

Uploaded by

Copyright:

Available Formats

Product name: GOYENCHEMUV-700 Page 1/5

GO YEN Chemical.,Material Safety Data Sheet

GO YEN CHEMICAL INDUSTRIAL CO.,LTD.

SECTION 1 – PRODUCT AND COMPANY INFORMATION

PRODUCT NAME : GOYENCHEMUV-700

SYNONYMS：Nanometer high-effective UV block additives, anti-aging additives

DATE PREPARED: FEB. 7, 2013

TRADE NAME(S): GOYENCHEMUV-700

COMPANY NAME: GO YEN CHEMICAL INDUSTRIAL CO., LTD. (GYC Group)

CONTACT TELEPHONE NUMBER: +886-7-2272766.

CONTACT FAX NUMBER: +886-7-2272768.

SECTION 2 – COMPOSITION/INFORMATION ON INGREDIENTS

INGREDIENT % CAS NO.

SECTION 3 – HAZARDS IDENTIFICATION

ROUTES OF ENTRY Inhalation: Yes, Skin Contact: Yes, Ingestion: Yes

PHYSICIAL AND CHEMICAL DAMAGES: ---

regarded as fire-resistant application. No need to worry about fire or reaction.)

SECTION 4 –FIRST AID MEASURES

IN CASE -Immediately remove patient to fresh air.

SECTION 5– FIRE AND EXPLOSION DATA

SECTION 6–ACCIDENTAL RELEASE MEASURES

STEPS TO BE TAKEN IN THE EVENT OF A SPILL OR DISCHARGE:

SECTION 7–HANDING AND STORAGE

THE VENTILATION SYSTEM:

necessary to use special ventilation system.

ATTENTION WHEN HANDLE OR STORE

SECTION 8–EXPOSURE CONTROLS/PERSONAL PROTECTION

THE PARAMETERS OF CONTROL :

1. The average permit consistency of 8 hours daytime/The average permit consistency of

short time/The average permit consistency of maximum：3300ppm

2. Biological indicator：Take over LD50:2.8ml/kg (big mouse test)

PERSONAL PROTECTION EQUIPMENT : .

Wear safety glasses or goggles or face guard; wear the contact

In ventilates place, the general operation does not have to wear

The general operation does not have to wear protection

Others Install flushes equipment in exposed zone for emergency

SECTION 9–PHYSICAL AND CHEMICAL PROPERTIES

Appearance : White Powder

Compatibility(resin, polymer): excellent

SECTION 10–STABILITY AND REACTIVITY

Stable  Conditions to avoid : to be heated, fire

Hazardous May occur

Incompatibility Conditions to avoid : Avoids the moisture contact

SECTION 11–TOXICOLOGICALTY INFORMATION

Acute Toxicity : Non-toxic

Partial effect : None

SECTION 12–ECOLOGICALTY INFORMATION

SECTION 13–DISPOSAL CONSIDERATIONS

SECTION 14–TRANSPORT INFORMATION

International transportation regulations : IATA/ICAO Not restricted

Local transportation regulations : Road traffic safety rule 84th

Special transportation method & matters needing attention : ---

SECTION 15–REGULATORY INFORMATION

SECTION 16–OTHER INFORMATION

Name : GO YEN CHEMICAL INDUSTRIAL CO ,LTD(GYC Group)

Tabulation date : FEB. 7, 2013

You might also like