Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 107 views

    Z-5 Series Running Tool

    Uploaded by

    azze bouz
    The Z-5 series running tool is used to install Camco Z-5 collar locks into tubing strings. It consists of a fishing neck, upper adapter, inner mandrel, ratchet assembly, running prong, and skirt housing attached to the collar lock with shear pins. Upward jarring sets the lock into the tubing, causing the ratchet to engage and prevent unsetting, while further jarring releases the running tool from the installed lock.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Z-5 Series Running Tool

    Uploaded by

    azze bouz
    107 views1 page
    The Z-5 series running tool is used to install Camco Z-5 collar locks into tubing strings. It consists of a fishing neck, upper adapter, inner mandrel, ratchet assembly, running prong, and skirt housing attached to the collar lock with shear pins. Upward jarring sets the lock into the tubing, causing the ratchet to engage and prevent unsetting, while further jarring releases the running tool from the installed lock.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The Z-5 series running tool is used to install Camco Z-5 collar locks into tubing strings. It consists of a fishing neck, upper adapter, inner mandrel, ratchet assembly, running prong, and skirt housing attached to the collar lock with shear pins. Upward jarring sets the lock into the tubing, causing the ratchet to engage and prevent unsetting, while further jarring releases the running tool from the installed lock.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    107 views1 page

    Z-5 Series Running Tool

    Uploaded by

    azze bouz
    The Z-5 series running tool is used to install Camco Z-5 collar locks into tubing strings. It consists of a fishing neck, upper adapter, inner mandrel, ratchet assembly, running prong, and skirt housing attached to the collar lock with shear pins. Upward jarring sets the lock into the tubing, causing the ratchet to engage and prevent unsetting, while further jarring releases the running tool from the installed lock.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Wireline Operations - Running Tools

    Camco - Z-5 Series Running Tool


    Camco Z-5 series running tools are wireline service

    Down Hole Tools


    tools that are used to install Camco Z-5 collar locks
    in collar recesses in the tubing string.

    The Z-5 series running tool consists of a fishing neck


    with a threaded pin connection on the upper end, an
    upper adapter, an inner mandrel, a ratchet assembly,
    a running prong and a skirt housing on the lower end
    which is attached to the appropriate collar lock with
    shear pins.

    The running prong, which is used to set the lock, is


    also attached to the collar lock's inner sleeve with
    shear pins. Upward jarring will set the collar lock,
    causing the ratchet to capture the inner mandrel and
    running prong assembly so that downward motion
    cannot unset the lock. Continued upward jarring will
    subsequently release the prong and the skirt housing
    from the collar lock.

    Wireline Operations - Running Tools


    Z-5 Series
    Running Tool

    Engineering Data
    Prong Fishing
    Maximum Connecting Connecting Neck Shear Pin
    Nominal Assembly No-Go Thread Thread O.D. Pulling Diameter Length
    Size Number (in.) (Pin) (Box) (in.) Tool* (in.) (in.)
    1 1/2 15042 1.445 15/16" -10 N/A 1.187 15166 1/8 13.516
    2 15044 1.750 15/16" -10 1/2" - 13 1.375 15168 3/16 15.046
    2 1/2 15045 2.125 15/16" -10 1/2" - 13 1.375 15168 3/16 15.593
    3 15046 2.687 15/16" -10 1/2" - 13 1.375 15168 3/16 16.968
    3 1/2 15047 2.698 15/16" -10 1/2" - 13 1.375 15168 3/16 16.781 Next Item:
    Camco
    * For retrieval of Z-5 series running tools
    Z-6 Series Running Tool

    Section Menu Rev 0 [11.02]


    Camco Last Item

    You might also like