QinetiQ

CERTIFICATE OF TYPE APPROVAL

(EC Certificate of Type Examination - Module B)
NOTIFIED BODY (Marine Equipment Directive - 96/98/EC, as amended *l)
No 0191

Applicant:- Manufacturer:-
Kelvin Hughes Ltd Kelvin Hughes Ltd
New North Road, Hainault New North Road, Hainault
Ilford, Essex IG6 2UR Ilford, Essex IG6 2UR
United Kingdom United Kingdom
This is to certify that the applicant has submitted details of a:-
Shipborne Radar Equipment (IEC 62388 Cat 1 & Cat 1C)
(COMMISSION DIRECTIVE 2009/26/EC - ITEM A.1/4.34 & ITEM A.1/4.38)
Of system types known and designated as:-
a) MantaDigital TM, X-Band Marine Radar, CAT1 Systems
b) MantaDigital TM, S-Band Marine Radar, CAT1 Systems
c) MantaDigital TM, X-Band { • rine hart -dar, CAT1C Systems s
d) MantaDigital TM, S-Band dar, CAT1C Systems
(Comprising component parts racteristics shown in shedule 2 to 5)
and that these have been assessed, teste ombination of component parts as
described in the attached schedules, is CE ith the relevant parts of:
IEC 62388: 2008, "Marine Shipb
IEC 60945 : 2002, "General Require gation Equipment"
IEC 62288: 2008 "Presentation of ion on shipborne navigational displays"
(being testing standards listed in column 5 o rective 2009/26/EC for Item 4.34 & 4.38)
Note: The presentation standard of this equipme has•j-n ass :-sedagainst clauses in IEC 62388:2008 derived
from IMO Resolution MSC.191(79) and which a`^uat- hose published in IEC 62288:2008.
It is also RECOGNISED that the equipment Ib^ttlrir i t§ o9r ace standards not inferior to those
adopted by the International Maritime Organisation, and which are contained in the relevant parts of
Resolution MSC.191(79), Resolution MSC.192(79) and Resolution A694(17).

SIGNED:
DATE of ISSUE: 20'' September 2010
P1 Goddard Authorised Signatory DATE of EXPIRY : 19' September 2015
for and on behalf of QinetiQ Ltd
Certificate Number: QQ-MED-11/10-01
EU/USCG Mutual Recognition Agreement USCG Approval Number: 165.120/EC0191/1110-01
Council Decision 2004/425/EC (applies to Item A.1/4.34 ARPA (Tracking CAT1), display and function only)

This Certificate is Valid until expiry date shown, subject to the

standard conditions of issue printed on page 6
Kelvin Hughes Ltd are Module D registered with QinetiQ in accord with
standard condition 3, ref; Certificate DQAS-06/01-KH001R4
mCa
QinetiQ Maritime and Coastguard Agency
Cody Technology Park The MCA is an Executive Agency of
Ively Road, Farnborough the Department for Transport
Hampshire. GU14 OLX

Under the terms of the United Kingdom Statutory Instrument, No 1957: 1999, QinetiQ Ltd has been Notified to the European Commission
by the Maritime and Coastguard Agency as a Body authorised to conduct Conformity Assessment procedures under the provisions of the
European Council Directive 96/98/EC (as amended) on Marine Equipment and issue Certificates of Type Approval.

QinetiQ/EES/EMES/MED/002/2.0 *1 Commission Directives 2009/26/EC, 2008/67/EC, 2002/75/EC & 2002/84/EC

Page 1 of 8


Schedule 1
Statement on New "Radar Systems" Standard IEC 62388

The International Maritime Organisation (IMO) adopted RESOLUTION MSC.192(79) on 6 December 2004
On the REVISED PERFORMANCE STANDARDS FOR RADAR EQUIPMENT. These standards are mandated to be
implemented on or after 1st July 2008.
The Scope recognised that radar should provide the integration and display of radar video, target tracking
information, positional data derived from own ships position (EPFS) and geo referenced data.
The integration and display of AIS information should be provided to complement radar. The capability of
displaying selected parts of Electronic Navigation Charts and other vector chart information may be provided to aid
navigation and for position monitoring.
Contained within MSC.192(79) were details of the Differences in the performance requirements for various
sizes/categories of ship/craft to which SOLAS applies, these were contained in TABLE 1.
Cat 3 Cat 2 Cat 1
Size of ship/craft <500 gt 500 gt to <10,000 gt All ships/craft
and HSC<10,000 gt 1 10,000 gt
_
Minimum operational display area diameter 180mm Dia. 250mm Dia 320mm Dia
Minimum display area 195 x 195 mm 270 x 270 mm 340 x 340 mm
Auto acquisition of targets - - Yes
Minimum acquired radar target capacity 20 30 40
Minimum activated AIS target capacity 20 30 40
Minimum sleeping AIS target capacity 00 150 200
Trial Manoeuvre t^ - Yes
In addition radar equipment can optionally conf is of performance criteria for High Speed Craft
and/or for electronic chart display.
IMO resolution MSC.192(79) performance sta nternational Electrotechnical Standards
Organisation (IEC) and turned into the Int-r irst edition 2008.
IEC 62388 replaces 7 other standards that cov of radar performance; these were IEC 60936-
1, IEC 60936-2, IEC 60936-3, IEC 60936-5, IE EC 60872-3.
The Marine Equipment Directive (96/98/EC) detai rocedure for conformity assessment and
approval for the range of IMO mandated marine e uipm t. The articular requirements for each equipment item
is listed and the test requirement is detailed in ^Current version being contained in Stn
Amending Directive, 2009/26/EC which contair and testing standards in their up-to-
date version and allocated to existing MED equipment item numbers for radar equipment as detailed below.
MED Item. Previous Description IEC 62388 Category Radar Display area
4th Amendment & earlier & 5th Amendment listing
A.1/4.34 Radar with ARPA Cat 1 320mm Dia.
A.1/4.35 Radar with ATA Cat 2 250mm Dia.
A.1/4.36 Radar with EPA Cat 3 (EPA no longer accepted) 180mm Dia.
A.1/4.37 HSC with ARPA Cat 1H 320mm Dia.
A.1/4.37 HSC with ARPA Cat 2H 250mm Dia.
A.1/4.38 Chart Radar Additional. Suffix `C' on Cat 1, Cat 2, CatlH or Cat 2H above
(HSC Radar with ATA No longer used)

Presentation Standard - IMO Resolution MSC.191(79) and IEC 62288

IEC 62388 was also written to include all the appropriate Presentation criteria and performance standards for a
shipborne navigation displays as detailed in IMO Resolution MSC.191(79) and therefore any radar assessed by the
QinetiQ Notified Body as compliant with IEC 62388 is also deemed to have presention standards compliant with
Resolution MSC.191(79) and is also recognised as compliant with identical standards for presentation of Radar
equipment contained in IEC 62288:2008.

QinetiQ
Cody Technology Park
Ively Road, Farnborough
Hampshire. GU14 OLX Certificate Number QQ-MED-11/10-01

QinetiQ/EES/EMES/MED/002/2.0
Page 2 of 8


Schedule 2a -Category 1 Radar

MantaDigital TM Radar Displays & Processor, CAT]. Systems
The applicant declared that the following units form the radar processing and display section of the
system designations a) & b), given on Page 1. These units have been assessed & tested, and
satisfactory details of these units were included in the technical file.
The resultant radar systems are consistent with the Item Descriptions A1/4.34, given in Annex Al of
Commission Directive 2009/26/EC and Category 1 of MSC.192(79) and IEC 62388.

SYSTEM comprising of:-

MantaDigital T"" 26" Display & Radar Processor MDD-A1-26 *1
(Pedestal Unit including Trackerball)
or MantaDigital T"" 26" Desktop Display MDD-A30-26 *1
(including Trackerball)
and MantaDigital T'" Radar Processor MDP-A1
or MantaDigital T'" 26" Console Display MDD-A20-26 *2
and MantaDigital T"" Radar Processor MDP-A1
and Ma ntaDigital T"" Remote Trackerball MDD-A110 *2
SOFTWARE:- MantaDigitaI' Core Software (ZM-2144) Version 1.xx *3
Manta Transmitter interface Firmware (ZM-2114) Version 1.xx *3
Manta Transmitter interface FPGA (ZM-2160) Version 1.xx *3
Manta Display interface Firmware (ZM-2007) Version 1.xx *3
Manta Systems interface Firmware (ZM-2008) Version 1.xx *3
End of ^k - - -- d
The system will include a suitable tran - ^, rom Schedule 3 and may also
include ancillary items from the lis in Schedule 4 on Page 6.
* NOTES:-
1 The Trackerball unit integrated into the co with one of the other control options listed
in Schedule 4.
ole. The Trackerbal (MDD-A110) may be replaced
with one of the other control options listed i
3 This approval remains valid for equipment includin° or software amendments, as allowed by the N.xxformat
(xx represents numerals), where written details of . %^ suc odific% ons have been submitted to and accepted by QinetiQ.

Technical Characteristics Notified Body 0191

IEC 62288:2008 Category:- Full operational radar display
PRESENTATION DISPLAY TYPE 26" Colour LCD Multi-function trackerball and on-screen controls allows
quick & easy control functions and data entry.
RADAR DISPLAY CIRCLE _320mm Effective Diameter
RADAR TARGET CAPACITY ACQUIRED 100 targets 40 minimum for Cat 1
AUTO ACQUISITION OF TARGETS Yes Required for Cat 1
TRIAL MANOEUVRE Yes Required for Cat 1
AIS TARGET CAPACITY ACTIVATED <_500 40 minimum for Cat 1
SLEEPING <_500 (500 max, any mix) 200 minimum for Cat 1

IEC 61162-1 SERIAL (NMEA) PORTS Listener - 8 Conformity to IEC 61162-1:2000.

Talker 8 Configurable to IEC 61162-2 for AIS port.
TEMPERATURE RANGE Exposed -25°C to +70°C -- Turning Units & Antenna
& IEC 60945 CLASS Protected -15°C to +55°C. -- All other units

POWER SOURCE Internal UPS available or configure to external UPS

110 or220V AC ,50/60Hz
(Kelvin Hughes recommended installation)

Conditions of Issue of this certificate are printed on Page 8.

QinetiQ
Cody Technology Park
Ively Road, Farnborough
Hampshire. GU14 OLX Certificate Number QQ-MED-11/10-01

QinetiQ/EES/EMES/MED/002/2.0
Page 3 of 8


Schedule 2b -Category 1C Radar

MantaDigital TM Displays & Chart Radar Processor, CAT1C Systems
The applicant declared that the following units form the radar processing and display section of the
system designations c) & d), given on Page 1. These units have been assessed & tested, and
satisfactory details of these units were included in the technical file.
The resultant radar systems are consistent with the Item Descriptions A1/4.34 and A.1/4.38, given in
Annex Al of Commission Directive 2009/26/EC and Category 1 and 1C of MSC.192(79) and IEC 62388
SYSTEM comprising of:-
MantaDigital TM 26" Display & Radar Processor MDD-A9-26 *1
(Pedestal Unit including Trackerball)
or MantaDigital TM 26" Desktop Display MDD-A30-26 *1
(including Trackerball)
and MantaDigital TM Radar Processor MDP-A9
or MantaDigital TM 26" Console Display MDD-A20-26 *2
and MantaDigital TM Radar Processor MDP-A9
Remote and MantaDigital
Trackerball TM MDD-A110 *2
SOFTWARE:- MantaDigital TM Core Software (ZM-2144) Version 1.xx *3
Manta Transmitter interface Firmware (ZM-2114) Version 1.xx *3
Manta Transmitter interface FPGA (ZM-2160) Version 1.xx *3
Manta Display interface Firmware (ZM-2007) Version 1.xx *3
Manta Systems interface Firmware (ZM-2008) Version 1.xx *3
End of t ----
The system will include a suitable tr ed from Schedule 3 and may also
include ancillary items from t - I f nd in Schedule 4 on Page 6.
* NOTES:-
1 The Trackerball unit integrated into the control laced with one of the other control options listed
in Schedule 4.
2 These units are supplied separately for integrat ole. The Trackerbal (MDD-A110) may be replaced
with one of the other control options listed in
3 This approval remains valid for equipment inc udi sod are amendments, as allowed by the N.xx format
(xx represents numerals), where written details of a ons have been submitted to and accepted by QinetiQ.

Technical Characteristics
Notified Body 0191
IEC 62288:2008 Category :- Full operational radar display
PRESENTATION DISPLAY TYPE 26" Colour LCD Multi-function trackerball and on-screen controls allows
quick & easy control functions and data entry.

RADAR DISPLAY CIRCLE _320mm Effective Diameter Radar Circle and Chart area
RADAR TARGET CAPACITY ACQUIRED 100 targets 40 minimum for Cat 1
AUTO ACQUISITION OF TARGETS Yes Required for Cat 1
TRIAL MANOEUVRE Yes Required for Cat 1
AIS TARGET CAPACITY ACTIVATED <_500 40 minimum for Cat 1
SLEEPING <_500 (500 max, any mix) 200 minimum for Cat 1

IEC 61162-1 SERIAL (NMEA) PORTS Listener - 8 Conformity to IEC 61162-1:2000.

Talker 8 Configurable to IEC 61162-2 for AIS port.
TEMPERATURE RANGE Exposed -25°C to+70°C -- Turning Units & Antenna
& IEC 60945 CLASS Protected -15°C to +55°C. -- All other units

POWER SOURCE Internal UPS available or configure to external UPS

110 or220V AC ,50/60Hz
(Kelvin Hughes recommended installation)

Conditions of Issue of this certificate are printed on Page 8.

QinetiQ
Cody Technology Park
Ively Road, Farnborough
Hampshire. GU14 OLX Certificate Number QQ-MED-11/10-01

QinetiQ/E ES/E M E S/MED/002/2.0

Page 4 of 8


Schedule 3 - Category 1 & 1C Radar Transceivers

MantaDigital TM Radar & Chart Radar Systems
The applicant declared that the following units form the radar Transceiver section of the system
designations given on Page 1. The resulting systems have been assessed & tested, and satisfactory
details of these units were included in the technical file.

X-Band Systems:-
10kW, X-Band Transceiver/Turning Unit CAE-A30-20
with transmitter Interface Unit NNR-A66
or 25kW X-Band Transceiver/Turning Unit CAE-A12-20
with transmitter Interface Unit NNR-A66
or 25kW X-Band Transceiver Unit (Bulkhead Mount) CTX-A8
and X-Band Turning Unit CAE-A30-22
and 1.3m, 1.9m or 2.5m Low Profile X-Band Antenna LPA-A13 or LPA-A19 or LPA-A25
S-Band Systems:-
Manta 30kW, Transceiver/Turning Unit GTX-A16 *1
and Drive control unit GTX-A24 *1
or Mk 7 30kW Transceiver Unit (Bulkhead Mount) CTX-A9
and Manta, Turning Unit GTX-A11 *1
and Drive control unit GTX-A24
and 3.9m, S-Band Low Profile Antenna LPA-A1 or LPA-A3
E

* NOTES:-
1 The rotational speed of the S-Band turnin

Technical Characteristics

FREQUENCY OF OPERATION 9.410 0lit rMOdy U lYiomHz

3.050 GHz - S-Band ±10MHz
PULSE REPETITION FREQUENCY 3000, 1500, 750, 375
PULSE LENGTHS 0.05-0.07µs, 0.16-0.25µs, Transceiver dependent.
0.6-1.0µs
EMISSION CODE 3MOOPONAN
POWER CHARACTERISTIC: - X-Band 10kW or 25kW (PEP)
POWER CHARACTERISTIC: - S-Band 30kW (PEP)
TEMPERATURE RANGE Exposed -25°C to +70°C -- Turning Units&Antenna
& IEC 60945 CLASS Protected -15°C to +55°C. -- All other units

POWER SOURCE
110 or 220V-AC, 50/60Hz The S-Band turning units use a 3 phase supply.

Conditions of Issue of this certificate are printed on Page 8.

QinetiQ
Cody Technology Park
Ively Road, Farnborough
Hampshire. GU14 OLX Certificate Number QQ-MED-11/10-01

QinetiQ/EES/EMES/MED/002/2.0
Page 5 of 8


Certificate of Type Approval - Schedule 4

MantaDigital TM Radar Systems - Ancillary and Optional Units
The applicant declared that the following units may be added to the basic radar systems illustrated in
schedules 1 to 4. These units have been assessed & tested in conjunction with MantaDigital TM and
SharpEye series radar systems, and satisfactory details are included in the technical files.

ANCILLARY UNITS:-
MantaDigital T" Keyboard & Trackerball MDD-A101
MantaDigital T' Control Panel & Trackerball MDD-A102
MantaDigital T' Trackerball & pencil tray MDD-A100
MantaDigital T' Remote Keyboard MDD-A130
Ergonomic Trackerball (Ergopod, right handed) NRR-A18
Ergonomic Trackerball (Ergopod, left handed) NRR-A18-2
MantaDigital T' Radar Interswitch Unit (6 display x 6 transceiver) MDD-A12
Serial Interface Module (provides 8 additional ports) FSD-A198 *2
Dual DNC Unit FSD-A10 *3
Network Audio & Video Control Unit FSD-A13 *3
NTI Audio & Video Switch Matrix IT-SM-8 L-AV-LCD *3, 4
End of
* NOTES:-
1 These are alternative/additional control ckerball.
2 This option is an internal module installe DP-A9 processor unit.
3 These items form a display/control in e used to form an adaptive workstation
system between units of the MantaDigita and MantaDigital T" ECDIS. The exact
configuration enabled by this system is f ccordance with an agreed ships operating
plan.
4 'het is a numeral in the range 2 to Sand den
interconnection system.
Notified Body 0191

Conditions of Issue of this certificate are printed on page 8.

QinetiQ
Cody Technology Park
Ively Road, Farnborough
Hampshire. GU14 OLX Certificate Number DO-MED-11/10-01

Qi netiQ/EES/EMES/MED/002/2.0
Page 6 of 8


Certificate of Type Approval - Schedule 5

Statement on Spurious and Out of Band Emissions and the Boundary

between these emissions
The following Radar Transceiver, represents part of the systems shown on earlier schedules, has been
subject to a measurement procedure as detailed in IEC 60936-1, Annex D, as contained in Amendment
1, dated July 2002 and the guidelines contained in ITU-R Recommendation RM.1177-3. This standard
defines the test method and requirements for shipborne radar to meet in order to comply with Appendix
S3 of the Radio Regulations and ITU-R Recommendations SM.1539-1 and SM.1541-1.
The results of the measurement procedure were satisfactory and provide sufficient evidence that these
Radar Transceivers are compliant with the criteria contained in the stated standards.

The Transceivers Measured were:-

Description Model No. Modulator PCB Magentron
10kW, X-Band,Transceiver/Turning Unit (24RPM) CAE-A30-7 CTX-A332 MSF1425B
25kW, X-Band,Transceiver/Turning Unit (24RPM) CAE-A12-20 CTX-A201-M MG5437
25kW, X-Band,Transceiver (Downmast) CTX-A8 CTX-A370 MG5437
and Turning Unit (24RPM) CAE-A30-6
30kW, S-Band,Transceiver (Down mast) CTX-A9 CTX-A370 M1302LK
and Turning Unit (24RPM) CAE-A42
The test reports detailling the tests and test r ult ain ' are:-
QinetiQ/FST/CMT
QinetiQ/FST
QinetiQ/FST/
QinetiQ/FS
DERA/SS/PSD
These reports together with manufactury= . i^• d= '. tions also detail the build standard
regarding items such as Antenna, waveguid-, _ i .. i any filters fitted to the test unit which the
the test results specifically apply.
Transceiver Modules contained in the CAE-A12-30, E-A 0-20 Transceiver/Turning units and GTX-A16
Transceiver unit are identical to those founNi led '- AE-A30-7 and CTX-A9 units respectively.
Since the applicable electronic circuitry and microwave component parts are identical a presumption of
conformity can be applied by analogy
The measurement procedure as detailed in IEC 60936-1, Annex D has now been reproduced in IEC 62388,
Annex B and the requirements and references to ITU-R documents are identical. This statement may be
taken as applicable to IEC 62388, Annex B compliance.

For Information the above transceivers also have USA, FCC identities as follows:
Description Model No. FCC Identity
10kW, X-Band,Transceiver/Turning Unit (24RPM) CAE-A30-7 CICCAE-A30-7
25kW, X-Band,Transceiver/Turning Unit (24RPM) CAE-A12-20 CICCAE-A12-20
25kW, X-Band,Transceiver (Downmast) CTX-A8 CICCTX-A8
30kW, S-Band,Transceiver (Down mast) CTX-A9 CICCTX-A9

Conditions of Issue of this certificate are printed on Page 8.

QinetiQ
Cody Technology Park
Ively Road, Farnborough
Hampshire. GU14 OLX Certificate Number QQ-MED-11/10-01

QinetiQ/EES/ EMES/MED/002/2.0
Page 7 of 8


Certificates of Type Approval

Conditions of Issue

1. Each Certificate will be used in its entirety and not reproduced in part.

2 This certificate remains valid until the date shown (normally 5 years) unless cancelled or revoked, provided:-

i) the design and manufacture remain unmodified from the specimen tested and recorded in the Technical
Construction File;

ii) any conditions contained in the schedule are complied with;

iii) Should the specified regulations or standards be amended during the validity of this certificate, the
product(s) is/are to be re-approved prior to it/they being placed on board vessels to which the amended
regulations or standards apply;

iv) and, the equipment remains satisfactory in service.

3. The mark of conformity may only be affixed to the equipment listed on this certificate and a manufacturer's
Declaration of Conformity issued when the production Quality Assurance requirements laid down in Annex B, of the
Directive (96/98/EC) is fully complied with and controlled by a written inspection agreement with a Notified Body.
The use of the QinetiQ Notified Body Number (0191) in combination with the Wheelmark implies that the
manufacturer is Registered with the QinetiQ Quality Assurance Scheme. A Certificate of Registration is issued to the
manufacturer and should be made available on request. The manufacturer is responsible for ensuring that
certification renewal and periodic surveillance are maintained.
4. USCG Approval Number, A Mutual Recognition Agreement (MRA) on marine equipment exists between the
European Commission and the US Coastguard but only applies to equipment types included in the listing of marine
equipment annexed to the MRA. For included equipment a USCG Approval number may be issued. This can be
found under the MED certificate number on the first page and should be used on the main identity label of the
equipment. Radio and Radar equipment continues to need separate or additional approval by the USA FCC.
5. This certificate does not confer any approval status to this equipment other than defined by, and tested according
to the specifications listed on Page 1.

6. The labeling requirements of IMO Resolution A694(17) shall be met. Descriptions of each unit of apparatus forming
part of the equipment will be as given on this Certificate. Each unit of equipment will be marked with the minimum
safe distance at which it should be mounted from a standard and steering magnetic compass.

7. No unit of apparatus shall be advertised or labeled as "approved" or "certified" on behalf of the Maritime and
Coastguard Agency, the Department of Transport or the QinetiQ Group in any sense other than that it is a type that
has been assessed as satisfactory against the specification;

8 The manufacturer must advise QinetiQ of any intended changes to the design or production of the equipment
which might affect the equipment performance.

9 Minor Modifications to the equipment will be considered on a case-by-case basis. QinetiQ will review any factory
test results, in consultation if necessary, with the test facility that conducted the original Type Approval testing on
the equipment. QinetiQ will advise the manufacturer if any further testing is required to maintain valid
certification.

10 If an equipment manufacturer wishes to have the type approved equipment designated under alternative names
(e.g. agent/distributor's name and model number), a separate application should be completed and sent to QinetiQ.

QinetiQ Ltd
Marine Approval and Testing Service
Cody Technology Park, Room 1005/A5
Ively Road, Farnborough
Hants, GU14 OLX
United Kingdom

QinetiQ/E ES/EMES/MED/002/2.0
Page 8 of 8