Submittal Data

PROJECT UNIT TAG: QUANTITY

TYPE OF
REPRESENTATIVE SERVICE: DATE:
: ENGINEER: SUBMITTED BY: DATE:
CONTRACTOR: APPROVED BY: DATE:

CR 15-10 A-F-A-E-HQQE
Vertical, multistage centrifugal pump with suction and
discharge ports on the same level. The pump head and
base are in cast iron - all other wetted parts are in
stainless steel (EN 1.4301)

Note! Product picture may differ from actual product

Conditions of Service Pump Data Motor Data

Flow: 14.5 m³/h Max pressure at stated temp: 16 bar / 120 °C Rated power - P2: 11 kW
Head: 125.3 m Liquid temperature range: -20 .. 120°C Rated voltage: 380-415D/660-690YV
Efficiency: 64.6 % Maximum ambient temperature: 60 °C Mains frequency: 50 Hz
Liquid: Water Approvals: CE, EAC,ACS Enclosure class: 55 Dust/Jetting
NPSH required: 1.47 m Shaft seal: HQQE Insulation class: F
Specific Gravity: 0.960 Product number: 96501901 Motor protection: PTC
Motor type: 160MB
Eta 1/1: 91.2-91.2 %

H CR 15-10, 3*400 V, 50Hz eta

[m] [%]
Q = 14.5 m³/hH
= 125.3 m
140 Pumped liquid = Water
Density = 958.4 kg/m³
120

100 100

80 80

60 60

40 40

20 Eta pump = 69.6 % 20

Eta pump+motor = 64.6%
0 0
0 2 4 6 8 10 12 14 16 18 20 22 24 Q [m/h
³]
P NPSH
[kW] [m]
10 P1 10

P2
5 P1 = 7.344 kW 5
P2 = 6.812 kW
NPSH = 1.47 m
0 0

1/25
 Submittal Data

204

318
482

350
G 1/2 G 1/2

4 x 18.1
889

1 X G 1/2
125
165
20
90

130 65
176 215 4 x 13.5
300 256

Materials:
Base: Cast iron
Base: EN 1561 EN-GJL-200
Base: ASTM A48-25B
Impeller: Stainless steel
Impeller: AISI 304
Impeller: EN 1.4301
9 2
8 10a
10 28

7
Material code: A
105
113
Code for rubber: E
61

18
62
51
100

60

69

3 37
26a
65 55
4 45

64
64a

80 49
c
9
4
65
4a 45

47a
64d
65
44a 45

44b 37
64b
64c 6

26c
26b
66
67

25
38
38a

2/25
 Company name:
Created by:
Phone:

Date: 30/09/2020
Qty. Description
1 CR 15-10 A-F-A-E-HQQE

Note! Product picture may differ from actual product

Product No.: 96501901

Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). The pump head and
base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability,
safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is
via DIN flanges.

The pump is fitted with a 3-phase, fan-cooled asynchronousmotor.

Further product details

Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic electro-
deposition (CED) process. CED is a high-quality dip-painting process where an electrical field around the
products ensures deposition of paint particles as a thin, well-controlled layer on the surface. An integral part
of the process is a pretreatment. The entire process consists of these elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL9005.

Pump
A long split coupling connects the pump and motor shaft. It is enclosed in the motor stool by means of two
coupling guards. The long coupling makes it possible to replace the shaft seal without removing the motor
from the pump.

The pump head, pump head cover and flange for motor mounting is made in one piece. The pump
head has a combined 1/2" priming plug and vent screw.

Printed from Grundfos Product Centre [2020.09.010] 3/25

 Company name:
Created by:
Phone:

Date: 30/09/2020

The pump is fitted with a balanced O-ring seal unit with a rigid torque-transmission system. This seal type is
assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing, this seal type is
suitable for high-pressure applications. The cartridge construction also protects the pump shaft from possible wear
from a dynamic O-ring between pump shaft and shaft seal.
Primary seal:
• Rotating seal ring material: silicon carbide (SiC)
• Stationary seat material: silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of this
material pairing offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

The shaft seal is screwed into the pump head.

The chambers and impellers are made of stainless-steel sheet. The chambers are provided with a
PTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surfaces,
and the shape of the blades ensure a high efficiency.

The base is made of cast iron. The flanges and base are cast in one piece. The outlet side of the base has a
drain plug. The pump is secured to the foundation by four bolts through the base plate.

Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards. The
motor is flange-mounted with free-hole flange (FF).
Motor-mounting designation in accordance with IEC 60034-7: IM B 5 (Code I) / IM 3001 (Code I).
Electrical tolerances comply with IEC 60034.
The motor efficiency is classified as IE3 in accordance with IEC60034-30-1.
The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082. The
protection reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalled conditions.
Thermal switches must be connected to an external control circuit in a way which ensures that the automatic
reset cannot cause accidents. The motors must be connected to a motor-protective circuit breaker according
to local regulations.
The motor can be connected to a variable speed drive for adjustment of pump performance to any duty
point. Grundfos CUE offers a range of variable speed drives. Please find more information in Grundfos
Product Center.
Technical data

Liquid:
Pumped liquid: Water

Printed from Grundfos Product Centre [2020.09.010] 4/25

 Company name:
Created by:
Phone:

Date: 30/09/2020
Qty. Description
Liquid temperature range: -20 .. 120°C
Density: 958.4 kg/m³

Technical:
Pump speed on which pump data are based: 2924
rpm Actual calculated flow: 14.5 m³/h
Resulting head of the pump: 125.3m
Pump orientation: Vertical
Shaft seal arrangement: Single
Code for shaft seal: HQQE
Approvals on nameplate: CE,
EAC,ACS
Curve tolerance: ISO9906:2012 3B

Materials:
Base: Cast iron
EN 1561 EN-GJL-200
ASTM A48-25B
Impeller: Stainless steel
EN 1.4301
AISI 304
Bearing: SIC

Installation:
Maximum ambient temperature: 60 °C
Maximum operating pressure: 16 bar
Max pressure at stated temp: 16 bar / 120 °C
16 bar / -20 °C
Type of connection: DIN
Size of inlet connection: DN 50
Size of outlet connection: DN 50
Pressure rating for connection: PN 25
Flange size for motor:
FF30
0

Electrical data:
Motor standard: IEC
Motor type: 160MB
IE Efficiency class: IE3
Rated power - P2: 11
kW Power (P2) required by pump: 11
kWMains frequency: 50 Hz
Rated voltage: 3 x 380-415D/660-690Y V
Rated current: 20,8-19,8/12,0-11,8 A
RequestedVoltage: 400 V
RatedCurrentAtThisVoltage: 20.2 A
Starting current: 660-780%
Cos phi - power factor: 0.88-0.84
Rated speed: 2940-2950 rpm
Efficiency: IE3 91,2%
Motor efficiency at full load: 91.2-91.2 %
Motor efficiency at 3/4 load: 91.8 %
Motor efficiency at 1/2 load: 91.3 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Motor No: 85U17524

Controls:
Printed from Grundfos Product Centre [2020.09.010] 5/25
 Frequency converter: NONE

Printed from Grundfos Product Centre [2020.09.010] 6/25

 Company name:
Created by:
Phone:

Date: 30/09/2020
Qty. Description
Others:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 149 kg
Gross weight: 177 kg
Shipping volume: 0.488 m³
Danish VVS No.: 385904100
Swedish RSK No.: 5823481
Finnish LVI No.: 4925440
Country of origin: HU
Custom tariff no.: 84137075

Printed from Grundfos Product Centre [2020.09.010] 7/25

 Company name:
Created by:
Phone:

Date: 30/09/2020
96501901 CR 15-10 A-F-A-E-HQQE 50 Hz
H CR 15-10, 3*400 V, 50Hz eta
[m] [%]
Q = 14.5 m³/hH
= 125.3 m
Pumped liquid = Water
Density = 958.4 kg/m³

140

120

100 100

80 80

60 60

40 40

20 20

Eta pump = 69.6 %

Eta pump+motor = 64.6%
0 0
0 2 4 6 8 10 12 14 16 18 20 22 24 Q [m³/h]
P NPS
[kW] H
[m]

10 10

P1

8 P2 8

6 6

4 4

2 2
P1 = 7.344 kW
P2 = 6.812 kW
NPSH = 1.47 m
0 0
Printed from Grundfos Product Centre [2020.09.010] 8/25
 Company name:
Created by:
Phone:

Date: 30/09/2020
H CR 15-10, 3*400V,50Hz eta [%]
Description Value [m]
Q = 14.5 m³/hH
General information: = 125.3 m
CR 15-10 Pumped liquid = Water
Product A-F-A-E-HQQE Density = 958.4 kg/m³
140
Product No: 96501901
EAN number: 5700396231488
120
Technical:
Pump speed on which pump data
are based: 2924 rpm 100 100

Actual calculated flow: 14.5 m³/h

Resulting head of the pump: 125.3 m 80 80

Maximum head: 141 m

Stages: 10 60 60

Impellers: 10
Number of reduced-diameter impellers: 0 40 40
Low NPSH: N
Pumporientation: Vertical 20 20
Shaft seal arrangement: Single Eta pump = 69.6 %
Eta pump+motor = 64.6 %
Code for shaft seal: HQQE 0 0
Approvals on nameplate: CE, EAC,ACS
Curve tolerance: ISO9906:2012 3B
Pump version: A
P1
Model: A
P2
Materials:
Base: Cast iron
Base: EN 1561 EN-GJL-200
Base: ASTM A48-25B
P1 = 7.344 kW
Impeller: Stainless steel P2 = 6.812 kW
NPSH = 1.47 m
Impeller: EN 1.4301
Impeller: AISI 304
Material code: A x65130
1XG1/2
418.1 x
GG1/21/2
350

318204

Code for rubber: E

204
Bearing: SIC 318

Installation:
Maximum ambient temperature: 60 °C
482

Maximum operating pressure: 16 bar

Max pressure at stated temp: 16 bar / 120 °C 350
G 1/2 G 1/2
Max pressure at stated temp: 16 bar / -20 °C
Type of connection: DIN 4 x 18.1
889

1 X G 1/2

Size of inlet connection: DN 50

Size of outlet connection: DN 50
125
165
20
90

Pressure rating for connection: PN 25 130 65

4 x 13.5

Flange size for motor: FF300

176 215
300 256

Connect code: F
Liquid:
Pumped liquid: Water
Liquid temperature range: -20 .. 120 °C
Density: 958.4 kg/m³
Electrical data:
Motor standard: IEC
+T +T +T

Motor type: 160MB

IE Efficiency class: IE3
IEC TP211 THERMALLY PROTECTED WHEN THE THERMISTORS
OF
CONTROL

Rated power - P2: 11 kW

TO
MAIN SUPPLY THERMISTORS PTC ACCORDING TO DIN 44082

AMPLIFIER
RELAY

L1 L2 L3
FOR

Power (P2) required by pump: 11 kW

RELAY

Mains frequency: 50 Hz
ARE CONNECTED TO AMPLIFIER

3 x 380-415D/660-690Y +T +T +T

Rated voltage: V
Rated current: 20,8-19,8/12,0-11,8 A
Printed from Grundfos Product Centre [2020.09.010] TO
9/25
AMPLIFIER
RELAY

L1 L2 L3
 Requested voltage: 400 V
Rated current at this voltage: 20.2 A

Printed from Grundfos Product Centre [2020.09.010] 10/25

 Company name:
Created by:
Phone:

Date: 30/09/2020
Description Value
Starting current: 660-780 %
Cos phi - power factor: 0.88-0.84
Rated speed: 2940-2950 rpm
Efficiency: IE3 91,2%
Motor efficiency at full load: 91.2-91.2 %
Motor efficiency at 3/4 load: 91.8 %
Motor efficiency at 1/2 load: 91.3 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Motor protec: PTC
Motor No: 85U17524
Controls:
Frequency converter: NONE
Others:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 149 kg
Gross weight: 177 kg
Shipping volume: 0.488 m³
Danish VVS No.: 385904100
Swedish RSK No.: 5823481
Finnish LVI No.: 4925440
Country of origin: HU
Custom tariff no.: 84137075

Printed from Grundfos Product Centre [2020.09.010] 11/25

 Company name:
Created by:
Phone:

Date: 30/09/2020
96501901 CR 15-10 A-F-A-E-HQQE 50 Hz
cos phi CR15-10 + 160MB 11 kW 3*400 V, 5
0
Hz I
eta [A]

eta

cos

0.8 40

0.6 30
I

0.4 20

0.2 10

0.0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 P2 [kW]
n P1
[rpm] P1 [kW]
3200

3000 12

2800 8

2600 4

2400 0

Printed from Grundfos Product Centre [2020.09.010] 12/25

 Company name:
Created by:
Phone:

Date: 30/09/2020
96501901 CR 15-10 A-F-A-E-HQQE 50 Hz

13.5
x
4
215
256
65
18.1
4x
G 1/2

130

176
300
318
204

1 X G 1/2
G 1/2
350

Note! All units are in [mm] unless others are stated.

Disclaimer: This simplified dimensional drawing does not show all details.

Printed from Grundfos Product Centre [2020.09.010] 13/25

 Company name:
Created by:
Phone:

Date: 30/09/2020
96501901 CR 15-10 A-F-A-E-HQQE 50 Hz

+T +T +T

THE
THERMISTORS ARE CONNECTED TO AMPLIFIER RELAY FOR
CONTROL OF MAIN SUPPLY THERMISTORS PTC ACCORDING TO
TO

WHEN
AMPLIFIER
RELAY
L1 L2 L3
THERMALLY PROTECTED

+T +T +T
TP211

DIN 44082
IEC

TO
AMPLIFIER
RELAY
L1 L2 L3

Note! All units are in [mm] unless others are stated.

Printed from Grundfos Product Centre [2020.09.010] 14/25

 Company name:
Created by:
Phone:

Date: 30/09/2020
96501901 CR 15-10 A-F-A-E-HQQE 50 Hz
Input Sizing result
General
Application Industry Type CR 15-10
Select type of installation Steam boiler Quantity 1
Select subapplication Boiler feed Motor 11 kW
Dimensioning flow 14.5 m³/h
Total head 125 m
Flow 14.5 m³/h
Prefer fast delivery No
Head 125.3 m (+0%)
Your requirements Min.inlet pressure 0.35 bar ( 103 °C, against
Factor for 2nd flow 1 atmosphere)
Friction losses 0m Power P1 7.344 kW
Factor for 2nd head 1
Max. liquid temperature 103 °C Power P2 required in theduty point 6.812 kW
Liquid temperature during operation 100 °C Eta pump 69.6 %
Allowed undersize 5% Eta motor 92.7 %
Pump design Eta pump+motor 64.6 % =Eta pump * Eta motor
End-suction close coupled vertical Yes Eta total 64.6 % =Eta relative to the duty
singlestage point
Energy consumption 36605 kWh/Year
Control mode
CO2 emission 30400 kg/Year
Variable speed
Enclosure class IP20 Price 17.020,00 AED
Maximum frequency 100 % Life cycle cost 114760 AED /5Years
Edit load profile
Load profile Standard profile
Period Year
Pump operating time 5900 h/a H CR 15-10, 3*400 V,50Hz eta [%]
[m]
Configuration Q = 14.5 m³/hH
= 125.3 m
Select type of hydraulic Single Pumped liquid = Water
Density = 958.4 kg/m³
Electrical data
Frequency 50 Hz 140
Phase 1 or 3
Min. power limit for SD start 5.5 kW
120
Voltage 1 x 230 or 3 x 400V
Hit list settings 100
100
Energy price 0.46 AED/kWh
Increase of energy price 6%
80
Calculation period 5 years 80
CO2 emission intensity 0.831 kg/kWh
60 60
Load Profile

1 2 3 4 5 40 40

Flow 100 80 60 40 25 %
Head 100 106 110 112 112 % 20 20
P1 7.344 6.7 5.828 4.778 3.958 kW Eta pump = 69.6 %
Eta total 64.6 60.1 53.6 44.3 33.6 % Eta pump+motor = 64.6 %
0 0
Time 1500 2000 1000 1000 400 h/a 0 2 4 6 8 10 12 14 16 182
0 22 Q [m³/h]
P NPSH
Energy consumption 11017 13400 5828 4778 1583 kWh/Year [kW] [m]

Quantity 1 1 1 1 1

10 10
P1

P2

5 5

P1 = 7.344 kW
P2 = 6.812 kW
NPSH = 1.47 m
0 0

Printed from Grundfos Product Centre [2020.09.010] 15/25

 Company name:
Created by:
Phone:

Date: 30/09/2020
Installation and Input Sizing Results
Dimensioning flow: 14.5 m³/hTotal
head: 125 m Type CR 15-10
Flow safety factor: 1 Quantity * Motor 1 * 11kW
Head safety factor: 1

Flow 14.5 m³/h

H total 125.3 m ( +0%)
Power P1 7.344 kW
Power P2 required in the duty point 6.812 kW
Eta pump 69.6 %
Eta motor 92.7 %
Eta pump+motor 64.6 % =Eta pump * Etamotor
Flow total 60879 m³/year
Energy consumption 36605 kWh/Year
Price 17.020,00 AED
Life cycle cost 114760 AED /5Years

Load profile
1 2 3 4 5
Flow 100 80 60 40 25 %
Head 100 106 110 112 112 %
P1 7.344 6.7 5.828 4.778 3.958 kW
Eta total 64.6 60.1 53.6 44.3 33.6 %
Time 1500 2000 1000 1000 400 h/a
Energy consumption 11017 13400 5828 4778 1583 kWh/Year
Quantity 1 1 1 1 1

Pump Curve Dimensional Drawing

H CR 15-10, 3*400 V, 50Hz eta
[m]
Q = 14.5 m³/hH
= 125.3 m
Pumped liquid = Water
Density = 958.4 kg/m³

140
4 x 13.5

120

100 100
215
256
65

80 80

60 60
4 x 18.1

40 40
G 1/2

20 20

Eta pump = 69.6 %

130

176
300
318

Eta pump+motor = 64.6%

0 0
204

0 2 4 6 8 10 12 14 16 18 20 22 Q[m
]
³/h
P NPSH
1 X G 1/2

[kW] [m]
G 1/2
350

10 10
P1

P2

5 5

P1 = 7.344 kW
P2 = 6.812 kW
NPSH = 1.47 m
0 0

Printed from Grundfos Product Centre [2020.09.010] 16/25

 Company name:
Created by:
Phone:

Date: 30/09/2020
Order Data:
Product name: CR 15-10
Amount: 1
Product No: 96501901

Total: Price on request

Printed from Grundfos Product Centre [2020.09.010] 17/25

 Company name:
Created by:
Phone:

Date: 30/09/2020
( tm069469 for MECR15,20 standard)

38 18
25 38

26

60

37
10a 10a 10a
8 9 8 9 8 9
10 10 10
51
62
61
109 69
105
3
110

49
49c
1 1 1 64
65
28a
45 4
28a

2a 18 1a 49
28 38 49c
28 36
25 36
32 7 32 64a
38
65
76a 7a 76a
7 45 4a
76 76
7a

80
47a
18 64d
2a 38 1a
28 36 36 49
28 49c
25 32 32
38 7 64c
7 76a 76a 66
7a 67
7a 76 76
65
45 44a

26a

44b
2a 1a 26c
18
28 26b
38 28
38 36 36
25 32 32
7 7 55
76a 76a
7a 76 7a 76

37

440b 36
440 441
440a
6 6 441b 6
441a 38a
38a 38a 35 6 6
25a 25a 25a
38a 38 a
38 38 38 25a 25 a
441b 38 38
441a
56 56 56 35

441

Printed from Grundfos Product Centre [2020.09.010] 18/25

 Company name:
Created by:
Phone:

Date: 30/09/2020
Exploded view

151a 151b

151

152
196
156c

156

100

185a 182a

156a

195b

158

157

154
157a

191a
155d

185c
192b

189 194
173
177
192
191
166
170a
185b
170
173a
165
176c
176d
176 184

164 172

171

155a

153

186

156b

195a
182

185 159d

Printed from Grundfos Product Centre [2020.09.010] 19/25

 Company name:
Created by:
Phone:

Date: 30/09/2020
Sectional drawing

156

100
159

158

151 157

156a
152
157a
152a
182a

154

155d

173
173a

177

191
191a 164

192

194

185b

184

185

156b

155a
172
182

153

159b

159d

Printed from Grundfos Product Centre [2020.09.010] 20/25

 Company name:
Created by:
Phone:

Date: 30/09/2020
Exploded view

151a 151b

151

152
196
156c

156

100

185a 182a

156a

195b

158

157

154
157a

191a
155d

185c
192b

189 194
173
177
192
191
166
170a
185b
170
173a
165
176c
176d
176 184

164 172

171

155a

153

186

156b

195a
182

185 159d

Printed from Grundfos Product Centre [2020.09.010] 21/25

 Company name:
Created by:
Phone:

Date: 30/09/2020
Sectional drawing

156

100
159

158

151 157

156a
152
157a
152a
182a

154

155d

173
173a

177

191
191a 164

192

194

185b

184

185

156b

155a
172
182

153

159b

159d

Printed from Grundfos Product Centre [2020.09.010] 22/25

 Company name:
Created by:
Phone:

Date: 30/09/2020
Spare parts CR 15-10, Product No. 96501901
Produced After 1152 (production year and week number)

Pos Description Annotation Classification Data Part no. Qty. Unit

- Kit, chamber stack 96508492 1 pcs
- 80 Chamber stack 1
- 3 Top intermediate chamber
Intermediate chamber
Front plate
Guide vane
- 4a Intermediate chamber cpl.
Bearing plate
3 Intermediate chamber
45 Neck ring cpl.
47 Bearing bush
65 Retainer for upper seal ring
- 4 Intermediate chamber cpl.
45 Neck ring cpl.
65 Retainer for upper seal ring
26a Strap cpl. Length (mm): 449MM
26.c Washer Designation: DIN 125A
Thickness: 1,6
26.b Hex head screw
44b Inlet part
- 44a Inlet part cpl.
Sand Lifter
Guide cup
Inlet part
45 Neck ring cpl.
65 Retainer for upper seal ring
47a Bearing ring
- 49 Impeller cpl.
Impeller plate
Impeller plate
Blade
49c Wear ring
- 51 Shaft, spline, cpl.
Bar
62 Stop ring
64d Spacing bush
64c Spacer
64a Spacing pipe Internal diameter: 17,5
Length (mm): 17
64 Spacing pipe Length (mm): 43.6
66 Wedge lock washer
67 Lock nut Thread: M8
69 Spacing bush
- Kit, coupling 96511352 1 pcs
Adjusting fork 1
- 8 Coupling 1
9 Hex socket head cap screw Designation: DIN 912
Length (mm): 25
Thread: M10
10a Coupling half
10 Shaft pin Diameter: 5
Length (mm): 26
- Kit, coupling guard 96509614 1 pcs

Printed from Grundfos Product Centre [2020.09.010] 23/25

 Company name:
Created by:
Phone:

Date: 30/09/2020
Pos Description Annotation Classification Data Part no. Qty. Unit
7.a Combi Slot Torx screw 4
7 Coupling guard 2
- Kit, gaskets 96509609 1 pcs
Gasket 2
24 O-ring 2
37 O-ring 2
38 O-ring 1
38 O-ring 1
38 O-ring 2
60 Spring 4
415 Gasket Internal diameter: 44 2
Outer diameter: 60
Thickness: 2
441b Gasket Internal diameter: 49 2
Outer diameter: 92
Thickness: 2
- Kit, plug 96511311 1 pcs
- 18 Air vent screw 1
Spindle
Plug
25a Drain plug 1
25 Plug 1
38 O-ring 1
38 O-ring 1
38 O-ring 2
38 O-ring Diameter: 5,3 1
Material type: FKM
Thickness: 2,4
38 O-ring Diameter: 16,3 1
Material type: FKM
Thickness: 2,4
38 O-ring Diameter: 16,3 2
Material type: FKM
Thickness: 2,4
- Kit, shaft seal HQQE 96511844 1 pcs
105 Shaft seal Material type: HQQE 1
- Kit, wear parts 96511827 1 pcs
- 4a Intermediate chamber cpl. 2
Sand Lifter
Guide cup
Bearing plate
Guide vane
3 Intermediate chamber
45 Neck ring cpl.
47 Bearing bush
65 Retainer
26.c Washer Designation: DIN 125A 2
Thickness: 1,6
26.b Hex head screw 2
45 Neck ring cpl. 8
47a Bearing ring 2
49c Wear ring 10
62 Retaining ring 1
64d Spacing bush 2
64c Spacer 1
64b Spacing bush Length (mm): 5.00 1
64a Spacing pipe Internal diameter: 17,5 2
Length (mm): 17
65 Retainer 8

Printed from Grundfos Product Centre [2020.09.010] 24/25

 Company name:
Created by:
Phone:

Date: 30/09/2020
Pos Description Annotation Classification Data Part no. Qty. Unit
66 Wedge lock washer 1
67 Lock nut Thread: M8 1
- Motor 1 pcs
+ Kit, bearing cpl. 96796676 1
- Kit, bearing plate 96796664 1
155.a Bearing cover
208a Gasket
208 Hex socket head cap screw Designation: DIN912
Length (mm): 40
Thread: M5
- Kit, eyebolt 96796712 1
189 Eyebolt
- Kit, fan 96796654 1
156.c Retaining ring
156 Fan
- Kit, fan cover 96796647 1
151 Fan cover
152.a Rubber bush
152 Hex head cap screw
196 Diaphragm
- Kit, flange 96796662 1
156.b Flange
159.b Seal ring
185.b Nut
185 Hex socket head cap screw
186 Drain plug
195.a Grease nipple
- Kit, gaskets 96798508 1
184 O-ring Diameter: 235
- Kit, lubrication nipple 96796671 1
195.b Grease nipple
195.a Grease nipple
- Kit, ND-end shield cpl. 96796669 1
32b Waved washer
156.a End shield NDE
157 O-ring
159 V-ring
185.c Nut
185.a Hex socket head cap screw
195.b Grease nipple
- Kit, shaft seal 96843459 1
159.b V-ring
159 V-ring
- Kit, terminal board 96796657 1
Terminal connection
Washer
36 Hex nut
173 Torx Screw
176.d Terminal board
176 Terminal board
177 Torx Screw
- Kit, terminal box cover 96796659 1
164 Terminal box cover
273a Pan head thread forming screw
- Motor 1 pcs
+ Kit, bearing cpl. 96796676 1
- Kit, bearing plate 96796664 1
155.a Bearing cover
208a Gasket

Printed from Grundfos Product Centre [2020.09.010] 25/25

 Company name:
Created by:
Phone:

Date: 30/09/2020
Pos Description Annotation Classification Data Part no. Qty. Unit
208 Hex socket head cap screw Designation: DIN912
Length (mm): 40
Thread: M5
- Kit, eyebolt 96796712 1
189 Eyebolt
- Kit, fan 96796654 1
156.c Retaining ring
156 Fan
- Kit, fan cover 96796647 1
151 Fan cover
152.a Rubber bush
152 Hex head cap screw
196 Diaphragm
- Kit, flange 96796662 1
156.b Flange
159.b Seal ring
185.b Nut
185 Hex socket head cap screw
186 Drain plug
195.a Grease nipple
- Kit, gaskets 96798508 1
184 O-ring Diameter: 235
- Kit, lubrication nipple 96796671 1
195.b Grease nipple
195.a Grease nipple
- Kit, ND-end shield cpl. 96796669 1
32b Waved washer
156.a End shield NDE
157 O-ring
159 V-ring
185.c Nut
185.a Hex socket head cap screw
195.b Grease nipple
- Kit, shaft seal 96843459 1
159.b V-ring
159 V-ring
- Kit, terminal board 96796657 1
Terminal connection
Washer
36 Hex nut
173 Torx Screw
176.d Terminal board
176 Terminal board
177 Torx Screw
- Kit, terminal box cover 96796659 1
164 Terminal box cover
273a Pan head thread forming screw
1 Flange 98913788 1 pcs
2a Pump head 98824714 1 pcs
+ 3 Bulk, Top intermediate chamber (3 pcs) 96538971 1 pcs
+ 3 Top intermediate chamber 98371105 1 pcs
- 4a Bulk, Intermediate chamber cpl. (10pcs) 96538842 2 pcs
3 Bulk, Intermediate chamber (3 pcs) 96535086 1
+ 4a Intermediate chamber cpl. 98371109 2 pcs
- 4 Bulk, Intermediate chamber cpl. (10pcs) 96538817 7 pcs
65 Bulk, Retainer for upper seal ring (20 pcs) 97699527 1
65 Retainer for upper seal ring 96587913 1
+ 4 Intermediate chamber cpl. 98371107 7 pcs

Printed from Grundfos Product Centre [2020.09.010] 26/25

 Company name:
Created by:
Phone:

Date: 30/09/2020
Pos Description Annotation Classification Data Part no. Qty. Unit
6 Base 98681111 1 pcs
7a Bulk, Combi Slot Torx screw (1000pcs) 96886324 4 pcs
10 Bulk, Shaft pin (10 pcs) Diameter: 5 96536473 1 pcs
Length (mm): 26
+ 18 Bulk, Air vent screw (5 pcs) 96547461 1 pcs
+ 18 Air vent screw 95061351 1 pcs
25 Bulk, Plug (10 pcs) 96536013 1 pcs
25a Bulk, Drain plug (10 pcs) 96535881 1 pcs
26a Strap cpl. Length (mm): 449MM 98984432 2 pcs
26.c Bulk, Washer (4 pcs) Designation: DIN 125A 99262704 2 pcs
Thickness: 1,6
26.c Bulk, Washer (10 pcs) Designation: DIN 125A 99886930 2 pcs
Thickness: 1,6
26 Staybolt 98982848 4 pcs
28 Hex head screw Length (mm): 25 99522923 4 pcs
Thread: M12
32 Bulk, Washer (100 pcs) Designation: DIN 125 A 98923051 4 pcs
Internal diameter: 17
Outer diameter: 30
Thickness: 3
36 Bulk, Hex nut (20 pcs) Thread: M16 96620480 4 pcs
37 Bulk, O-ring (20 pcs) 96538857 2 pcs
38 Bulk, O-ring (10 pcs) 99198791 1 pcs
38 Bulk, O-ring (10 pcs) 99198815 2 pcs
38 Bulk, O-ring (50 pcs) 99412727 2 pcs
44b Inlet part 98814595 1 pcs
+ 44a Inlet part cpl. 98818924 1 pcs
47a Bulk, Bearing ring (10 pcs) 96538795 2 pcs
- 49 Impeller cpl. 98394448 10 pcs
49c Bulk, Wear ring (10 pcs) 96547340 1
+ 51 Shaft, spline, cpl. 98368618 1 pcs
55 Outer sleeve 98812630 1 pcs
60 Bulk, Spring (20 pcs) 96538963 4 pcs
64d Bulk, Spacing bush (20 pcs) 96538947 2 pcs
64c Bulk, Spacer (5 pcs) 97980241 1 pcs
64a Bulk, Spacing pipe (10 pcs) Internal diameter: 17,5 98417487 2 pcs
Length (mm): 17
64 Bulk, Spacing pipe (20 pcs) Length (mm): 43.6 96535107 7 pcs
66 Bulk, Wedge lock washer (10 pcs) 96536157 1 pcs
67 Bulk, Lock nut (10 pcs) Thread: M8 98277008 1 pcs
69 Bulk, Spacing bush (20 pcs) 96538949 1 pcs
76a Bulk, Rivet (100 pcs) 96620489 1 pcs
105 Bulk, Shaft seal (11 pcs) Material type: HQQE 96538914 1 pcs

Printed from Grundfos Product Centre [2020.09.010] 27/25