The document provides design specifications for a scrubber vessel tagged SV-01 including:
1. The scrubber vessel has a mesh/multi-cyclone design with a 36 inch outer diameter and is made of carbon steel.
2. The scrubber vessel has a design efficiency of 99% for particles 10 microns and larger and is code stamped per ASME Section VIII Division 1.
3. Key piping, instrumentation and design details are provided including operating pressure and temperature, flow rate, relief valve settings, and material specifications.
The document provides design specifications for a scrubber vessel tagged SV-01 including:
1. The scrubber vessel has a mesh/multi-cyclone design with a 36 inch outer diameter and is made of carbon steel.
2. The scrubber vessel has a design efficiency of 99% for particles 10 microns and larger and is code stamped per ASME Section VIII Division 1.
3. Key piping, instrumentation and design details are provided including operating pressure and temperature, flow rate, relief valve settings, and material specifications.
The document provides design specifications for a scrubber vessel tagged SV-01 including:
1. The scrubber vessel has a mesh/multi-cyclone design with a 36 inch outer diameter and is made of carbon steel.
2. The scrubber vessel has a design efficiency of 99% for particles 10 microns and larger and is code stamped per ASME Section VIII Division 1.
3. Key piping, instrumentation and design details are provided including operating pressure and temperature, flow rate, relief valve settings, and material specifications.
The document provides design specifications for a scrubber vessel tagged SV-01 including:
1. The scrubber vessel has a mesh/multi-cyclone design with a 36 inch outer diameter and is made of carbon steel.
2. The scrubber vessel has a design efficiency of 99% for particles 10 microns and larger and is code stamped per ASME Section VIII Division 1.
3. Key piping, instrumentation and design details are provided including operating pressure and temperature, flow rate, relief valve settings, and material specifications.
XXX OPERATING PRESSURE, PSIG 2) PIPING TO BE PER ANSI B31.1. 3) BOLTING TO BE ASTM A193 B7/A194 2H, WHITE ZINC PLATED TAG# SV-01 4) VENT TO SAFE AREA/ ATOMSPHERE BY CUSTOMER. XXX FLOW RATE, LB/HR SCRUBBER VESSEL - MESH/MULTI-CYCLONES VESSEL OD: 36" MOC: CARBON STEEL XXX OPERATING TEMPERATURE, °F EFFICIENCY: 99% FOR 10 MICRONS & LARGER (LIQUIDS/SOLIDS) CODE STAMPED: YES, PER ASME SEC. VIII, DIV. 1 DESIGN CONDITIONS: 720 PSIG @ 200ºF MDMT: -20ºF CA: 0.0625"
SKID LIMITS
E PSV-1 THERMAL RELIEF 3/4" 600# RF X 1" 150# RF SET @ 720 PSIG NOTE 4 C
1" OUTLET B BV-3 NC 8" 600# RF SA-105
INSTRUMENTATION
TAG# RANGE UNITS
PI-1 0-1000 PSIG
LG/LS-1 0-12 (ALARM @ 10) INCH
220 - 650 PI 1 MULTI-CYCLONE 77,000 UTILITY LIST 70 - 150 NV
SOLENOID VALVE 24 VDC (XXX)
MESH PAD
A INLET INSTRUMENT AIR 80-120 PSIG
8" 600# RF SA-105 JB-1 3/4" NOZZLE CONNECTION JB-1 SV-01 CONNECTION TYPE SIZE SERVICE BV-2 LS LG JB-1 JB-1 S 1 1 A INLET 8" 600# RF FUEL GAS 3/4" IA ZSO ZSC B OUTLET 8" 600# RF FUEL GAS BV-1 1A 1A
C VENT 1" 150# RF HC VENT
1" 1" 1" DRAIN D D DRAIN 1" 600# RF HC LIQUID BV-4 DV-1A BV-6 FC 1" 600# RF SKID 1" SA-105 E 1.5" 3000# FNPT SKID DRAIN DRAIN
DATE 01/09/2019 C29732-01-PID-02 0 BA DESCRIPTION CYCLONE SCRUBBER SKID REV. DATE COMMENT BY APPD
P&ID A 01/09/2019 ISSUE FOR APPROVAL BA SK CUSTOMER GE 0 02/02/2019 ISSUE FOR CONSTRUCTION BA SK TERMOYOPAL DISTRIBUTION MANUFACTURING ADMINISTRATION OTHER FAB MACHINE PURCHASING ROUTING QC PROJ. MGR. 0 0 0 0 0 0 NOTICE: This drawing is the property of Gaumer Company Inc.. No Copies or unauthorized distribution is allowed without permission. PANEL 0 HEATER 0 CUSTOMER 0 FILE 0
