Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 41 views

    System Eng

    Uploaded by

    Alexandru Aloman
    The document describes a system for molds including patented stirrups, U-irons, wedges, spiral stirrups, and spacers. The stirrups and U-irons connect to form the mold structure. Spacers are placed along the panels at intervals determined by the casting height.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    System Eng

    Uploaded by

    Alexandru Aloman
    41 views2 pages
    The document describes a system for molds including patented stirrups, U-irons, wedges, spiral stirrups, and spacers. The stirrups and U-irons connect to form the mold structure. Spacers are placed along the panels at intervals determined by the casting height.

    Original Title

    System_eng

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a system for molds including patented stirrups, U-irons, wedges, spiral stirrups, and spacers. The stirrups and U-irons connect to form the mold structure. Spacers are placed along the panels at intervals determined by the casting height.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    41 views2 pages

    System Eng

    Uploaded by

    Alexandru Aloman
    The document describes a system for molds including patented stirrups, U-irons, wedges, spiral stirrups, and spacers. The stirrups and U-irons connect to form the mold structure. Spacers are placed along the panels at intervals determined by the casting height.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    legnotre legnotre industriale Spa

    quality trade-mark

    edilpadoan ®

    tel. (0039) 0444 499 339 fax (0039) 0444 490 555 http: //www.legnotre.com

    S Y S T E M
    F O R M O L D S

    PATENTED "EP" STIRRUPS

    The shaped end hooks into the lower iron or stirrup, creating a strong rigid structure.
    The eyelet allows the spacer head to be detached when dismantled.

    • HEIGHTS AVAILABLE: 50 / 100 / 150 cm


    • STARTING FROM THE GROUND
    • ATTACHED TO ONE ANOTER WITH A WEDGE

    Available in zinc-plated in 200 piece packets

    "U" IRONS
    To ensure a perfect result and high resistance these are produced from
    a profiled iron strip where the edges are folded progressively and smoothly.

    There are two types:


    Starting "U" irons: Continuing "U" irons:

    MEASURING MEASURING

    63 cm. 50 cm.
    113 cm. 100 cm.
    163 cm. 150 cm.

    Available in zinc-plated Available in zinc-plated


    in 120 piece pakets. in 120 piece pakets.

    "U" irons with an extra 13 cm are used at the Vertically attached to the starting
    base of the mold. This allows the insertion of the "U" iron with wedges to the desired
    first wedge into the spacer hole and the use of an height.
    starting board to lay the mold.

    The "U" irons can be combined with the "EP" stirrups.

    WEDGES FOR STIRRUPS AND "U" IRONS


    Available in unfinished iron or zinc-plated in 100 piece packets.
    spiral stirrups system • spacers

    SPIRAL STIRRUPS SYSTEM


    Height available 50 cm.
    Starting from the ground, they attach to one another until the
    desired height is reached with wedges.
    These stirrups can be use to put the panels horizontally
    for circular casting.

    Available in unfinished iron or zinc-plated in 1000 piece pallets.

    CUNEI PER STAFFE A ELICA


    Available in unfinished iron or zinc-plated in 1000 piece pallets.

    SPACERS

    Made of drawn steel to guarantee traction


    resistance above 70 kg/m2.
    Safe and easy to handle with rounded,
    non-sharp edges.
    Available in 100 piece packs for sizes up to
    95 cm and 50 piece packs for sizes above.
    Spacers for brick facade finishes with
    watertight plastic plugs are available on
    on request.

    HOW TO USE SPACERS :


    • F orthe same casting use spacers and stirrups from the casting spacers
    same producer. height cm. interval cm.
    • A spacers must go at not more than 5 cm from the end 600 15
    each panel. Use these two end spacers to regulate the
    position of the other spacers, following the indications, 550 20
    based on the casting height in the table. 500 25
    • Check the wedge-stirrups attachments meticulously. 450 30
    • The release of the concrete must be slow especially at the 400 35
    base of a mold. 350 40
    • The highest speed permitted to fill up the mold is 2,5 meter 300 45
    per hour. 250 50

    quality trade-mark

    where you can find our products edilpadoan ®

    wholsale in your area :


    legnotre legnotre industriale Spa

    via della Tecnica 29/31


    36075 Montecchio Maggiore (VI) - Italy
    tel. (0039) 0444 499 339
    fax (0039) 0444 490 555
    www.legnotre.com
    clienti@legnotre.com
    This is only a advertising depliant. Legnotre can modify any products.

    You might also like