Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 76 views

    Devireg 530

    Uploaded by

    Mohammed Al-kawak
    The document describes the DEVIregTM 530 electronic thermostat. It has a 2-pole switch and floor sensor to control floor temperature. It can be flush or surface mounted and has a dial to adjust the temperature setting. An LED indicates heating, standby or fault modes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Devireg 530

    Uploaded by

    Mohammed Al-kawak
    76 views1 page
    The document describes the DEVIregTM 530 electronic thermostat. It has a 2-pole switch and floor sensor to control floor temperature. It can be flush or surface mounted and has a dial to adjust the temperature setting. An LED indicates heating, standby or fault modes.

    Original Description:

    presentation about the heating regulator from DEVI company

    Original Title

    devireg530

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes the DEVIregTM 530 electronic thermostat. It has a 2-pole switch and floor sensor to control floor temperature. It can be flush or surface mounted and has a dial to adjust the temperature setting. An LED indicates heating, standby or fault modes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    76 views1 page

    Devireg 530

    Uploaded by

    Mohammed Al-kawak
    The document describes the DEVIregTM 530 electronic thermostat. It has a 2-pole switch and floor sensor to control floor temperature. It can be flush or surface mounted and has a dial to adjust the temperature setting. An LED indicates heating, standby or fault modes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    7.

    Controls
    Data
    DEVIreg™ Sheet

    DEVIreg™ 530
    The DEVIreg™ 530 is a simple electronic thermostat with a 2-pole switch, using a floor
    sensor (wire) to measure and control the desired floor temperature. It can be either flush-
    mounted or surface-mounted.

    The thermostat has a dial for adjusting the temperature setting with a scale from to 6.

    Furthermore, the thermostat has an LED indicating the current mode (heating, standby or
    fault).

    Type Value
    Benefits: Operation voltage 220 V- 240V~ 50/60 Hz
    • 2-pole safety breaker Standby power consumption max. 0.25 W

    • Low standby consumption Relay:


    Resistive load Max 15A / 3450W @ 230V
    • Sensor failure monitoring Inductive load Cos Φ = 0.3 max. 1A

    • LED indication for fault Sensing unit NTC 15 kOhm at 25° C


    Hysteresis ± 0.4° C
    • Frost protection
    Ambient temperature -10° C. to +30° C

    Standard compliance: Frost protection 5° C -


    Temperature range 5-45°C with floor sensor only
    • EN/IEC 60730-1 (general) and
    EN/IEC 60730-2-9 (thermostat) Cable specification max 1 x 4 mm2 or 2 x 2,5 mm2
    Ball pressure test temperature 75° C

    k H B d
    Approvals: Pollution degree 2 (domestic use)
    Controller type 1C
    Storage temperature -20° C to +65°C
    IP class 31
    Protection class Class II -
    Dimensions (H/W/D) 85 mm x 85 mm x 36 mm
    Weight 90 g

    Types
    Item no. Product name Type EAN no.
    140F1030 DEVIreg™ 530 With floor sensor and ELKO frame 5703466208991
    140F1031 DEVIreg™ 530 With floor sensor and ELJO frame 5703466209004
    140F1032 DEVIreg™ 530 With floor sensor and JUSSI frame 5703466209011
    19150352 DEVIreg™ 530 10 pcs. pack with floor sensor and JUSSI frame 5703466152829
    19150354 DEVIreg™ 530 10 pcs. pack with floor sensor and ELKO frame 5703466159248
    93
    Accessories and spare parts on page

    Produced by Danfoss © 07/2015 VDIIH102 79

    You might also like