Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 17 views

    Quickcmc1: Test Object - Device Settings

    Uploaded by

    tajudeen
    1. The document describes the settings and test results of a protection relay device. It provides details on the device settings, nominal voltage and current values, and test modules used to test phase pickup detection and overcurrent elements. 2. Three phase pickup tests were performed for phases R, Y and B and showed successful assessment results. An overcurrent test at 3.0 times nominal current value also assessed as passed. 3. The test results included fault calculation parameters, binary input/output values, timing information and analog input readings for each test case.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd

    Quickcmc1: Test Object - Device Settings

    Uploaded by

    tajudeen
    17 views18 pages
    1. The document describes the settings and test results of a protection relay device. It provides details on the device settings, nominal voltage and current values, and test modules used to test phase pickup detection and overcurrent elements. 2. Three phase pickup tests were performed for phases R, Y and B and showed successful assessment results. An overcurrent test at 3.0 times nominal current value also assessed as passed. 3. The test results included fault calculation parameters, binary input/output values, timing information and analog input readings for each test case.

    Original Description:

    material

    Original Title

    effff

    Copyright

    © © All Rights Reserved

    Available Formats

    RTF, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document describes the settings and test results of a protection relay device. It provides details on the device settings, nominal voltage and current values, and test modules used to test phase pickup detection and overcurrent elements. 2. Three phase pickup tests were performed for phases R, Y and B and showed successful assessment results. An overcurrent test at 3.0 times nominal current value also assessed as passed. 3. The test results included fault calculation parameters, binary input/output values, timing information and analog input readings for each test case.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd
    Download as rtf, pdf, or txt
    17 views18 pages

    Quickcmc1: Test Object - Device Settings

    Uploaded by

    tajudeen
    1. The document describes the settings and test results of a protection relay device. It provides details on the device settings, nominal voltage and current values, and test modules used to test phase pickup detection and overcurrent elements. 2. Three phase pickup tests were performed for phases R, Y and B and showed successful assessment results. An overcurrent test at 3.0 times nominal current value also assessed as passed. 3. The test results included fault calculation parameters, binary input/output values, timing information and analog input readings for each test case.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd
    Download as rtf, pdf, or txt
    of 18

    QuickCMC1

    . .
    Test Object - Device Settings
    . . .
    Substation/Bay:
    Substation: Substation address:
    Bay: Bay address:
    . . .
    Device:
    Name/description: Manufacturer:
    Device type: Device address:
    Serial/model number:
    Additional info 1:
    Additional info 2:
    . . .
    Nominal Values:
    f nom: 50.00 Hz Number of phases: 3
    V nom (secondary): 120.0 V V primary: 110.0 kV
    I nom (secondary): 5.000 A I primary: 1.000 kA
    . . .
    Residual Voltage/Current Factors:
    VLN / VN: 1.732 IN / I nom: 1.000
    . . .
    Limits:
    V max: 420.0 V I max: 50.00 A
    . . .
    Debounce/Deglitch Filters:
    Debounce time: 3.000 ms Deglitch time: 0.000 s
    . . .
    Overload Detection:
    Suppression time: 50.00 ms

    . .
    Test Module
    Name: OMICRON QuickCMC Version: 3.01
    Test Start: 11-Apr-2016 15:54:20 Test End: 11-Apr-2016 15:57:24
    User Name: Manager:
    Company:

    Test Results
    Title: R-PHAE PICK UP
    .
    Fault Calculator:
    Table Inputmode Parameters (All values are secondary)
    Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
    V L2-E 0.000 V -120.00 ° 50.000 Hz
    V L3-E 0.000 V 120.00 ° 50.000 Hz
    I L1 1.016 A 0.00 ° 50.000 Hz
    I L2 0.000 A -120.00 ° 50.000 Hz
    I L3 0.000 A 120.00 ° 50.000 Hz
    Generator Settings
    V L1-E 0.000V 0.00° +90°

    I L1
    180° 0°

    242.5 V -90° 1.5 A


    V L2-E 0.000V -120.00°
    V L3-E 0.000V 120.00°
    I L1 1.016A 0.00°
    I L2 0.000A -120.00°
    I L3 0.000A 120.00°

    Binary Outputs
    Bin. out 1 Bin. out 2 Bin. out 3 Bin. out 4
    0 0 0 0
    Binary Inputs
    Trip Start Overload
    0->1 1->0 1->0
    0.120s n/a n/a

    Analog Inputs
    VDCin IDCin
    -0.0001V 0.1405mA
    .
    Comment

    . .
    Synchronized mode (Synchronization to external signal failed)
    . . . .
    Assessment
    Passed 11-Apr-2016 15:42:27
    Title: Y-PHAE PICK UP
    .
    Fault Calculator:
    Table Inputmode Parameters (All values are secondary)
    Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
    V L2-E 0.000 V -120.00 ° 50.000 Hz
    V L3-E 0.000 V 120.00 ° 50.000 Hz
    I L1 0.000 A 0.00 ° 50.000 Hz
    I L2 1.016 A -120.00 ° 50.000 Hz
    I L3 0.000 A 120.00 ° 50.000 Hz
    Generator Settings
    V L1-E 0.000V 0.00° +90°

    180° 0°
    I L2

    242.5 V -90° 1.5 A


    V L2-E 0.000V -120.00°
    V L3-E 0.000V 120.00°
    I L1 0.000A 0.00°
    I L2 1.016A -120.00°
    I L3 0.000A 120.00°

    Binary Outputs
    Bin. out 1 Bin. out 2 Bin. out 3 Bin. out 4
    0 0 0 0
    Binary Inputs
    Trip Start Overload
    0->1 1->0 1->0
    0.231s n/a n/a

    Analog Inputs
    VDCin IDCin
    0.0000V 0.1405mA
    .
    Comment

    . .
    Synchronized mode (Synchronization to external signal failed)
    . . . .
    Assessment
    Passed 11-Apr-2016 15:43:17
    Title: B-PHAE PICK UP
    .
    Fault Calculator:
    Table Inputmode Parameters (All values are secondary)
    Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
    V L2-E 0.000 V -120.00 ° 50.000 Hz
    V L3-E 0.000 V 120.00 ° 50.000 Hz
    I L1 0.000 A 0.00 ° 50.000 Hz
    I L2 0.000 A -120.00 ° 50.000 Hz
    I L3 1.014 A 120.00 ° 50.000 Hz
    Generator Settings
    V L1-E 0.000V 0.00° +90°

    I L3

    180° 0°

    242.5 V -90° 1.5 A


    V L2-E 0.000V -120.00°
    V L3-E 0.000V 120.00°
    I L1 0.000A 0.00°
    I L2 0.000A -120.00°
    I L3 1.014A 120.00°

    Binary Outputs
    Bin. out 1 Bin. out 2 Bin. out 3 Bin. out 4
    0 0 0 0
    Binary Inputs
    Trip Start Overload
    0->1 1->0 1->0
    0.143s n/a n/a

    Analog Inputs
    VDCin IDCin
    0.0000V 0.1405mA
    .
    Comment

    . .
    Synchronized mode (Synchronization to external signal failed)
    . . . .
    Assessment
    Passed 11-Apr-2016 15:44:01
    Title: OC NI3.0 2TIMES @TMS=1.0
    .
    Fault Calculator:
    Table Inputmode Parameters (All values are secondary)
    Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
    V L2-E 0.000 V -120.00 ° 50.000 Hz
    V L3-E 0.000 V 120.00 ° 50.000 Hz
    I L1 2.000 A 0.00 ° 50.000 Hz
    I L2 2.000 A -120.00 ° 50.000 Hz
    I L3 2.000 A 120.00 ° 50.000 Hz
    Generator Settings
    V L1-E 0.000V 0.00° +90°
    I L3

    I L1
    180° 0°

    I L2
    242.5 V -90° 2.0 A
    V L2-E 0.000V -120.00°
    V L3-E 0.000V 120.00°
    I L1 2.000A 0.00°
    I L2 2.000A -120.00°
    I L3 2.000A 120.00°

    Binary Outputs
    Bin. out 1 Bin. out 2 Bin. out 3 Bin. out 4
    0 0 0 0
    Binary Inputs
    Trip Start Overload
    0->1 1->0 1->0
    9.930s n/a n/a

    Analog Inputs
    VDCin IDCin
    -0.0001V 0.0001mA
    .
    Comment

    . .
    Synchronized mode (Synchronization to external signal failed)
    . . . .
    Assessment
    Passed 11-Apr-2016 15:46:21
    Title: OC NI3.0 5TIMES @TMS=1.0
    .
    Fault Calculator:
    Table Inputmode Parameters (All values are secondary)
    Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
    V L2-E 0.000 V -120.00 ° 50.000 Hz
    V L3-E 0.000 V 120.00 ° 50.000 Hz
    I L1 5.000 A 0.00 ° 50.000 Hz
    I L2 5.000 A -120.00 ° 50.000 Hz
    I L3 5.000 A 120.00 ° 50.000 Hz
    Generator Settings
    V L1-E 0.000V 0.00° +90°
    I L3

    I L1
    180° 0°

    I L2
    242.5 V -90° 5.0 A
    V L2-E 0.000V -120.00°
    V L3-E 0.000V 120.00°
    I L1 5.000A 0.00°
    I L2 5.000A -120.00°
    I L3 5.000A 120.00°

    Binary Outputs
    Bin. out 1 Bin. out 2 Bin. out 3 Bin. out 4
    0 0 0 0
    Binary Inputs
    Trip Start Overload
    0->1 1->0 1->0
    4.269s n/a n/a

    Analog Inputs
    VDCin IDCin
    -0.0001V -0.0000mA
    .
    Comment

    . .
    Synchronized mode (Synchronization to external signal failed)
    . . . .
    Assessment
    Passed 11-Apr-2016 15:46:48
    Title: OC NI3.0 10TIMES @TMS=1.0
    .
    Fault Calculator:
    Table Inputmode Parameters (All values are secondary)
    Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
    V L2-E 0.000 V -120.00 ° 50.000 Hz
    V L3-E 0.000 V 120.00 ° 50.000 Hz
    I L1 10.00 A 0.00 ° 50.000 Hz
    I L2 10.00 A -120.00 ° 50.000 Hz
    I L3 10.00 A 120.00 ° 50.000 Hz
    Generator Settings
    V L1-E 0.000V 0.00° +90°
    I L3

    I L1
    180° 0°

    I L2
    242.5 V -90° 10.0 A
    V L2-E 0.000V -120.00°
    V L3-E 0.000V 120.00°
    I L1 10.000A 0.00°
    I L2 10.000A -120.00°
    I L3 10.000A 120.00°

    Binary Outputs
    Bin. out 1 Bin. out 2 Bin. out 3 Bin. out 4
    0 0 0 0
    Binary Inputs
    Trip Start Overload
    0->1 1->0 1->0
    2.975s n/a n/a

    Analog Inputs
    VDCin IDCin
    -0.0001V 0.0001mA
    .
    Comment

    . .
    Synchronized mode (Synchronization to external signal failed)
    . . . .
    Assessment
    Passed 11-Apr-2016 15:47:16
    Title: OC NI3.0 2TIMES @TMS=0.5
    .
    Fault Calculator:
    Table Inputmode Parameters (All values are secondary)
    Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
    V L2-E 0.000 V -120.00 ° 50.000 Hz
    V L3-E 0.000 V 120.00 ° 50.000 Hz
    I L1 2.000 A 0.00 ° 50.000 Hz
    I L2 2.000 A -120.00 ° 50.000 Hz
    I L3 2.000 A 120.00 ° 50.000 Hz
    Generator Settings
    V L1-E 0.000V 0.00° +90°
    I L3

    I L1
    180° 0°

    I L2
    242.5 V -90° 2.0 A
    V L2-E 0.000V -120.00°
    V L3-E 0.000V 120.00°
    I L1 2.000A 0.00°
    I L2 2.000A -120.00°
    I L3 2.000A 120.00°

    Binary Outputs
    Bin. out 1 Bin. out 2 Bin. out 3 Bin. out 4
    0 0 0 0
    Binary Inputs
    Trip Start Overload
    0->1 1->0 1->0
    4.957s n/a n/a

    Analog Inputs
    VDCin IDCin
    -0.0001V 0.0001mA
    .
    Comment

    . .
    Synchronized mode (Synchronization to external signal failed)
    . . . .
    Assessment
    Passed 11-Apr-2016 15:47:51
    Title: OC NI3.0 5TIMES @TMS=0.5
    .
    Fault Calculator:
    Table Inputmode Parameters (All values are secondary)
    Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
    V L2-E 0.000 V -120.00 ° 50.000 Hz
    V L3-E 0.000 V 120.00 ° 50.000 Hz
    I L1 5.000 A 0.00 ° 50.000 Hz
    I L2 5.000 A -120.00 ° 50.000 Hz
    I L3 5.000 A 120.00 ° 50.000 Hz
    Generator Settings
    V L1-E 0.000V 0.00° +90°
    I L3

    I L1
    180° 0°

    I L2
    242.5 V -90° 5.0 A
    V L2-E 0.000V -120.00°
    V L3-E 0.000V 120.00°
    I L1 5.000A 0.00°
    I L2 5.000A -120.00°
    I L3 5.000A 120.00°

    Binary Outputs
    Bin. out 1 Bin. out 2 Bin. out 3 Bin. out 4
    0 0 0 0
    Binary Inputs
    Trip Start Overload
    0->1 1->0 1->0
    2.137s n/a n/a

    Analog Inputs
    VDCin IDCin
    -0.0001V 0.0001mA
    .
    Comment

    . .
    Synchronized mode (Synchronization to external signal failed)
    . . . .
    Assessment
    Passed 11-Apr-2016 15:48:13
    Title: OC NI3.0 10TIMES @TMS=0.5
    .
    Fault Calculator:
    Table Inputmode Parameters (All values are secondary)
    Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
    V L2-E 0.000 V -120.00 ° 50.000 Hz
    V L3-E 0.000 V 120.00 ° 50.000 Hz
    I L1 10.00 A 0.00 ° 50.000 Hz
    I L2 10.00 A -120.00 ° 50.000 Hz
    I L3 10.00 A 120.00 ° 50.000 Hz
    Generator Settings
    V L1-E 0.000V 0.00° +90°
    I L3

    I L1
    180° 0°

    I L2
    242.5 V -90° 10.0 A
    V L2-E 0.000V -120.00°
    V L3-E 0.000V 120.00°
    I L1 10.000A 0.00°
    I L2 10.000A -120.00°
    I L3 10.000A 120.00°

    Binary Outputs
    Bin. out 1 Bin. out 2 Bin. out 3 Bin. out 4
    0 0 0 0
    Binary Inputs
    Trip Start Overload
    0->1 1->0 1->0
    1.485s n/a n/a

    Analog Inputs
    VDCin IDCin
    0.0000V -0.0000mA
    .
    Comment

    . .
    Synchronized mode (Synchronization to external signal failed)
    . . . .
    Assessment
    Passed 11-Apr-2016 15:48:37
    Title: I>>3.0, TIME=0.2, APPLIED 1.5 TIMES OF ISET
    .
    Fault Calculator:
    Table Inputmode Parameters (All values are secondary)
    Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
    V L2-E 0.000 V -120.00 ° 50.000 Hz
    V L3-E 0.000 V 120.00 ° 50.000 Hz
    I L1 4.500 A 0.00 ° 50.000 Hz
    I L2 4.500 A -120.00 ° 50.000 Hz
    I L3 4.500 A 120.00 ° 50.000 Hz
    Generator Settings
    V L1-E 0.000V 0.00° +90°

    I L3

    I L1
    180° 0°

    I L2

    242.5 V -90° 5.0 A


    V L2-E 0.000V -120.00°
    V L3-E 0.000V 120.00°
    I L1 4.500A 0.00°
    I L2 4.500A -120.00°
    I L3 4.500A 120.00°

    Binary Outputs
    Bin. out 1 Bin. out 2 Bin. out 3 Bin. out 4
    0 0 0 0
    Binary Inputs
    Trip Start Overload
    0->1 1->0 1->0
    0.207s n/a n/a

    Analog Inputs
    VDCin IDCin
    -0.0001V 0.0001mA
    .
    Comment

    . .
    Synchronized mode (Synchronization to external signal failed)
    . . . .
    Assessment
    Passed 11-Apr-2016 15:51:09
    Title: I>>5.0, TIME=0.1, APPLIED 1.5 TIMES OF ISET
    .
    Fault Calculator:
    Table Inputmode Parameters (All values are secondary)
    Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
    V L2-E 0.000 V -120.00 ° 50.000 Hz
    V L3-E 0.000 V 120.00 ° 50.000 Hz
    I L1 7.500 A 0.00 ° 50.000 Hz
    I L2 7.500 A -120.00 ° 50.000 Hz
    I L3 7.500 A 120.00 ° 50.000 Hz
    Generator Settings
    V L1-E 0.000V 0.00° +90°

    I L3

    I L1
    180° 0°

    I L2

    242.5 V -90° 8.0 A


    V L2-E 0.000V -120.00°
    V L3-E 0.000V 120.00°
    I L1 7.500A 0.00°
    I L2 7.500A -120.00°
    I L3 7.500A 120.00°

    Binary Outputs
    Bin. out 1 Bin. out 2 Bin. out 3 Bin. out 4
    0 0 0 0
    Binary Inputs
    Trip Start Overload
    0->1 1->0 1->0
    0.123s n/a n/a

    Analog Inputs
    VDCin IDCin
    0.0000V 0.0001mA
    .
    Comment

    . .
    Synchronized mode (Synchronization to external signal failed)
    . . . .
    Assessment
    Passed 11-Apr-2016 15:51:32
    Title: EF PICK UP
    .
    Fault Calculator:
    Table Inputmode Parameters (All values are secondary)
    Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
    V L2-E 0.000 V -120.00 ° 50.000 Hz
    V L3-E 0.000 V 120.00 ° 50.000 Hz
    I L1 208.0 mA 0.00 ° 50.000 Hz
    I L2 0.000 A -120.00 ° 50.000 Hz
    I L3 0.000 A 120.00 ° 50.000 Hz
    Generator Settings
    V L1-E 0.000V 0.00° +90°

    I L1
    180° 0°

    242.5 V -90° 300.0 mA


    V L2-E 0.000V -120.00°
    V L3-E 0.000V 120.00°
    I L1 0.208A 0.00°
    I L2 0.000A -120.00°
    I L3 0.000A 120.00°

    Binary Outputs
    Bin. out 1 Bin. out 2 Bin. out 3 Bin. out 4
    0 0 0 0
    Binary Inputs
    Trip Start Overload
    0->1 1->0 1->0
    0.054s n/a n/a

    Analog Inputs
    VDCin IDCin
    0.0000V -0.0145mA
    .
    Comment

    . .
    Synchronized mode (Synchronization to external signal failed)
    . . . .
    Assessment
    Passed 11-Apr-2016 15:53:00
    Title: EF NI3.0 2 TIMES@TMS=1.0
    .
    Fault Calculator:
    Table Inputmode Parameters (All values are secondary)
    Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
    V L2-E 0.000 V -120.00 ° 50.000 Hz
    V L3-E 0.000 V 120.00 ° 50.000 Hz
    I L1 400.0 mA 0.00 ° 50.000 Hz
    I L2 0.000 A -120.00 ° 50.000 Hz
    I L3 0.000 A 120.00 ° 50.000 Hz
    Generator Settings
    V L1-E 0.000V 0.00° +90°

    I L1
    180° 0°

    242.5 V -90° 400.0 mA


    V L2-E 0.000V -120.00°
    V L3-E 0.000V 120.00°
    I L1 0.400A 0.00°
    I L2 0.000A -120.00°
    I L3 0.000A 120.00°

    Binary Outputs
    Bin. out 1 Bin. out 2 Bin. out 3 Bin. out 4
    0 0 0 0
    Binary Inputs
    Trip Start Overload
    0->1 1->0 1->0
    10.078s n/a n/a

    Analog Inputs
    VDCin IDCin
    0.0000V 0.0001mA
    .
    Comment

    . .
    Synchronized mode (Synchronization to external signal failed)
    . . . .
    Assessment
    Passed 11-Apr-2016 15:53:31
    Title: EF NI3.0 5 TIMES@TMS=1.0
    .
    Fault Calculator:
    Table Inputmode Parameters (All values are secondary)
    Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
    V L2-E 0.000 V -120.00 ° 50.000 Hz
    V L3-E 0.000 V 120.00 ° 50.000 Hz
    I L1 1.000 A 0.00 ° 50.000 Hz
    I L2 0.000 A -120.00 ° 50.000 Hz
    I L3 0.000 A 120.00 ° 50.000 Hz
    Generator Settings
    V L1-E 0.000V 0.00° +90°

    I L1
    180° 0°

    242.5 V -90° 1.0 A


    V L2-E 0.000V -120.00°
    V L3-E 0.000V 120.00°
    I L1 1.000A 0.00°
    I L2 0.000A -120.00°
    I L3 0.000A 120.00°

    Binary Outputs
    Bin. out 1 Bin. out 2 Bin. out 3 Bin. out 4
    0 0 0 0
    Binary Inputs
    Trip Start Overload
    0->1 1->0 1->0
    4.273s n/a n/a

    Analog Inputs
    VDCin IDCin
    -0.0001V 0.0001mA
    .
    Comment

    . .
    Synchronized mode (Synchronization to external signal failed)
    . . . .
    Assessment
    Passed 11-Apr-2016 15:53:52
    Title: EF NI3.0 10 TIMES@TMS=1.0
    .
    Fault Calculator:
    Table Inputmode Parameters (All values are secondary)
    Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
    V L2-E 0.000 V -120.00 ° 50.000 Hz
    V L3-E 0.000 V 120.00 ° 50.000 Hz
    I L1 2.000 A 0.00 ° 50.000 Hz
    I L2 0.000 A -120.00 ° 50.000 Hz
    I L3 0.000 A 120.00 ° 50.000 Hz
    Generator Settings
    V L1-E 0.000V 0.00° +90°

    I L1
    180° 0°

    242.5 V -90° 2.0 A


    V L2-E 0.000V -120.00°
    V L3-E 0.000V 120.00°
    I L1 2.000A 0.00°
    I L2 0.000A -120.00°
    I L3 0.000A 120.00°

    Binary Outputs
    Bin. out 1 Bin. out 2 Bin. out 3 Bin. out 4
    0 0 0 0
    Binary Inputs
    Trip Start Overload
    0->1 1->0 1->0
    2.976s n/a n/a

    Analog Inputs
    VDCin IDCin
    -0.0001V -0.0000mA
    .
    Comment

    . .
    Synchronized mode (Synchronization to external signal failed)
    . . . .
    Assessment
    Passed 11-Apr-2016 15:54:09
    Title: EF NI3.0 2 TIMES@TMS=0.5
    .
    Fault Calculator:
    Table Inputmode Parameters (All values are secondary)
    Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
    V L2-E 0.000 V -120.00 ° 50.000 Hz
    V L3-E 0.000 V 120.00 ° 50.000 Hz
    I L1 400.0 mA 0.00 ° 50.000 Hz
    I L2 0.000 A -120.00 ° 50.000 Hz
    I L3 0.000 A 120.00 ° 50.000 Hz
    Generator Settings
    V L1-E 0.000V 0.00° +90°

    I L1
    180° 0°

    242.5 V -90° 400.0 mA


    V L2-E 0.000V -120.00°
    V L3-E 0.000V 120.00°
    I L1 0.400A 0.00°
    I L2 0.000A -120.00°
    I L3 0.000A 120.00°

    Binary Outputs
    Bin. out 1 Bin. out 2 Bin. out 3 Bin. out 4
    0 0 0 0
    Binary Inputs
    Trip Start Overload
    0->1 1->0 1->0
    5.018s n/a n/a

    Analog Inputs
    VDCin IDCin
    0.0000V 0.0001mA
    .
    Comment

    . .
    Synchronized mode (Synchronization to external signal failed)
    . . . .
    Assessment
    Passed 11-Apr-2016 15:54:47
    Title: EF NI3.0 5 TIMES@TMS=0.5
    .
    Fault Calculator:
    Table Inputmode Parameters (All values are secondary)
    Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
    V L2-E 0.000 V -120.00 ° 50.000 Hz
    V L3-E 0.000 V 120.00 ° 50.000 Hz
    I L1 1.000 A 0.00 ° 50.000 Hz
    I L2 0.000 A -120.00 ° 50.000 Hz
    I L3 0.000 A 120.00 ° 50.000 Hz
    Generator Settings
    V L1-E 0.000V 0.00° +90°

    I L1
    180° 0°

    242.5 V -90° 1.0 A


    V L2-E 0.000V -120.00°
    V L3-E 0.000V 120.00°
    I L1 1.000A 0.00°
    I L2 0.000A -120.00°
    I L3 0.000A 120.00°

    Binary Outputs
    Bin. out 1 Bin. out 2 Bin. out 3 Bin. out 4
    0 0 0 0
    Binary Inputs
    Trip Start Overload
    0->1 1->0 1->0
    2.133s n/a n/a

    Analog Inputs
    VDCin IDCin
    -0.0001V 0.0001mA
    .
    Comment

    . .
    Synchronized mode (Synchronization to external signal failed)
    . . . .
    Assessment
    Passed 11-Apr-2016 15:55:07
    Title: EF NI3.0 10 TIMES@TMS=0.5
    .
    Fault Calculator:
    Table Inputmode Parameters (All values are secondary)
    Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
    V L2-E 0.000 V -120.00 ° 50.000 Hz
    V L3-E 0.000 V 120.00 ° 50.000 Hz
    I L1 2.000 A 0.00 ° 50.000 Hz
    I L2 0.000 A -120.00 ° 50.000 Hz
    I L3 0.000 A 120.00 ° 50.000 Hz
    Generator Settings
    V L1-E 0.000V 0.00° +90°

    I L1
    180° 0°

    242.5 V -90° 2.0 A


    V L2-E 0.000V -120.00°
    V L3-E 0.000V 120.00°
    I L1 2.000A 0.00°
    I L2 0.000A -120.00°
    I L3 0.000A 120.00°

    Binary Outputs
    Bin. out 1 Bin. out 2 Bin. out 3 Bin. out 4
    0 0 0 0
    Binary Inputs
    Trip Start Overload
    0->1 1->0 1->0
    1.491s n/a n/a

    Analog Inputs
    VDCin IDCin
    -0.0001V -0.0000mA
    .
    Comment

    . .
    Synchronized mode (Synchronization to external signal failed)
    . . . .
    Assessment
    Passed 11-Apr-2016 15:55:23
    Title: I0>>0.8, TIME=0.2 SEC, APPLIED 1.5 TIMES OF I0>>
    .
    Fault Calculator:
    Table Inputmode Parameters (All values are secondary)
    Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
    V L2-E 0.000 V -120.00 ° 50.000 Hz
    V L3-E 0.000 V 120.00 ° 50.000 Hz
    I L1 1.200 A 0.00 ° 50.000 Hz
    I L2 0.000 A -120.00 ° 50.000 Hz
    I L3 0.000 A 120.00 ° 50.000 Hz
    Generator Settings
    V L1-E 0.000V 0.00° +90°

    I L1
    180° 0°

    242.5 V -90° 1.5 A


    V L2-E 0.000V -120.00°
    V L3-E 0.000V 120.00°
    I L1 1.200A 0.00°
    I L2 0.000A -120.00°
    I L3 0.000A 120.00°

    Binary Outputs
    Bin. out 1 Bin. out 2 Bin. out 3 Bin. out 4
    0 0 0 0
    Binary Inputs
    Trip Start Overload
    0->1 1->0 1->0
    0.230s n/a n/a

    Analog Inputs
    VDCin IDCin
    0.0000V 0.0001mA
    .
    Comment

    . .
    Synchronized mode (Synchronization to external signal failed)
    . . . .
    Assessment
    Passed 11-Apr-2016 15:56:56
    Title: I0>>1.0, TIME=0.1 SEC, APPLIED 1.5 TIMES OF I0>>
    .
    Fault Calculator:
    Table Inputmode Parameters (All values are secondary)
    Direct V L1-E 0.000 V 0.00 ° 50.000 Hz
    V L2-E 0.000 V -120.00 ° 50.000 Hz
    V L3-E 0.000 V 120.00 ° 50.000 Hz
    I L1 1.500 A 0.00 ° 50.000 Hz
    I L2 0.000 A -120.00 ° 50.000 Hz
    I L3 0.000 A 120.00 ° 50.000 Hz
    Generator Settings
    V L1-E 0.000V 0.00° +90°

    I L1
    180° 0°

    242.5 V -90° 2.0 A


    V L2-E 0.000V -120.00°
    V L3-E 0.000V 120.00°
    I L1 1.500A 0.00°
    I L2 0.000A -120.00°
    I L3 0.000A 120.00°

    Binary Outputs
    Bin. out 1 Bin. out 2 Bin. out 3 Bin. out 4
    0 0 0 0
    Binary Inputs
    Trip Start Overload
    0->1 1->0 1->0
    0.128s n/a n/a

    Analog Inputs
    VDCin IDCin
    0.0000V 0.0001mA
    .
    Comment

    . .
    Synchronized mode (Synchronization to external signal failed)
    . . . .
    Assessment
    Passed 11-Apr-2016 15:57:24

    Comment
    Summary
    20 tests passed, 0 tests failed, 0 tests not assessed 100.00% passed
    Test passed
    Overload occurred during
    testing!

    You might also like