PART II — TESTS — INDEX

PART SPECIFICATION NUMBER

A
Abrasion resistance............................................... 2A (T 96), (C 131)
Abrasion test:
Los Angeles ....................................................... 2A (T 96), (C 131)
Abson test ............................................................. 2A (T 170)
Absorption ............................................................ 2A (T 32), (C 67)
Absorption test:
Brick ................................................................. 2A (T 32), (C 67)
Coarse aggregate ............................................... 2A (T 85), (T 96), (C 131)
Fine aggregate .................................................. 2A (T 84)
Pipe ................................................................... 2B (T 280)
Acid resistance...................................................... 2A (T 42), (D 545)
Acidity, alkalinity, pH .......................................... 2A (T 200), (E 70)
Aggregate: (See also Coarse or Fine aggregate)
Accelerated polishing using British Wheel ...... 2A (T 179)
Effect on mortar strength ................................. 2A (T 71)
Extracted, mechanical analysis ......................... 2A (T 30)
Freezing and thawing ....................................... 2A (T 103)
Friable particles................................................. 2A (T 112)
Lightweight pieces ............................................ 2A (T 113)
Material finer than 75-µm sieve........................ 2A (T 11)
Moisture content .............................................. 2B (T 255)
Organic impurities ............................................ 2A (T 21)
Plastic fines ..................................................... 2A (T 210)
Reducing samples to testing size....................... 2B (T 248)
Sampling .......................................................... 2A (T 2), (D 75)
Sieve analysis ................................................... 2A (T 27)
Soundness, sulfate solution .............................. 2A (T 104)
Unit weight........................................................ 2A (T 19/T 19M)
Aggregate (general) ............................................. 2A (T 2), (D 75), (T 143), (D 345),
(T 165), (D 1075)
Aggregate degradation.......................................... 2A (T 96), (C 131)
Air content of:
Chace indicator ................................................. 2A (T 199)
Concrete, gravimetric........................................ 2A (T 121)
Hydraulic cement mortar .................................. 2A (T 137)
Pressure method ................................................ 2A (T 152)
Volumetric method .......................................... 2A (T 196)
Air-entraining additions, evaluation of ................ 2A (T 188)
Air-entraining admixtures..................................... 2A (T 157)
Air permeability fineness...................................... 2A (T 153)
Alkali-silica reaction in concrete .......................... 2B (T 299)
Alloy steel plate .................................................... 2A (T 68), (E 8)
Aluminum coating, weight of, on steel................. 2A (T 213M/T 213)
API gravity ........................................................... 2B (T 227), (D 1298)
Aqueous solutions ................................................ 2A (T 200), (E 70)
Area reduction ...................................................... 2A (T 68), (E 8)

Index II-1 AASHTO

 PART II — TESTS — INDEX

PART SPECIFICATION NUMBER

Asphalt: (See Bituminous materials)

Asphalt binder ...................................................... 2B (T 314), (T 315), (T 316), (T 319)
Asphalt content ..................................................... 2A (T 42), (D 545)
Asphalt, cutback ................................................... 2B (T 295)
Asphalt (general) ................................................. 2A (T 59), (D 244), (T 78), (D 402), (T 165),
(D 1075), (T 201), (D 2170), (T 202),
(D 2171)
Asphalt, hot-mix ................................................... 2B (T 308), (T 312)
Asphalt roofing materials.................................. 2A (T 47), (D 6)
2B (T 228), (D 70), (T 229), (D 71)
Energy dissipation............................................. 2B (T 321)
Fatigue .............................................................. 2B (T 321)
Flexural testing.................................................. 2B (T 321)
Specific gravity ................................................. 2B (T 227), (D 1298), (T 228), (D 70),
(T 229), (D 71)
Spot test............................................................. 2A (T 102)
Stiffness ............................................................ 2B (T 321)
Tensile testing ................................................... 2B (T 321)
Thin-film oven test............................................ 2A (T 179)
2B (T 240)
Asphalt temperature.............................................. 2B (T 317)
Auger boring for geotechnical explorations ......... 2B (T 306)

B
Back pressure saturation of soil ........................... 2B (T 296)
Bearing capacity .................................................. 2B (T 235), (D 1194)
Bending beam rheometer...................................... 2B (T 313)
Bending stress....................................................... 2A (T 68), (E 8)
Benkelman beam .................................................. 2B (T 317)
Bitumen content ................................................... 2A (T 42), (D 545)
Bitumen loss ......................................................... 2A (T 42), (D 545)
Bituminous materials:
Abson procedure ............................................... 2A (T 170)
California kneading compactor ......................... 2B (T 247)
Draindown in asphalt mixture........................... 2B (T 305)
Distillation:
Cutback asphalt ............................................. 2A (T 78), (D 402)
Petroleum products........................................ 2A (T 55), (D 95)
Ductility ............................................................ 2A (T 51), (D 113)
Elastic recovery test .......................................... 2B (T 301)
Emulsions.......................................................... 2A (T 59), (D 244)
Emulsions, polymer content.............................. 2B (T 302)
Flash and fire points, open cup ......................... 2A (T 48), (D 92)
Flash point:
Pensky-Martens ............................................. 2A (T 73), (D 93)
Float test ........................................................... 2A (T 50), (D 139)

Index II-2 AASHTO

 PART II — TESTS — INDEX

PART SPECIFICATION NUMBER

Bituminous materials—cont’d
General.............................................................. 2A (T 40), (D 140), (T 42), (D 545), (T 49),
(D 5), (T 50), (D 139), (T 51), (D 113),
(T 55), (D 95), (T 59), (D 244), (T 72),
(D 88), (T 78), (D 402), (T 201), (D 2170),
(T 202), (D 2171)
Hot extraction (Abson method) ........................ 2A (T 170)
Inorganic matter or ash ..................................... 2A (T 111)
Loss on heating ................................................. 2A (T 47), (D 6)
Penetration ........................................................ 2A (T 49), (D 5)
Percentage in mixtures ...................................... 2A (T 164)
Sampling ........................................................... 2A (T 40), (D 140)
Softening point ................................................. 2A (T 53), (D 36)
Soluable in organic solvent ............................... 2A (T 44)
Specific gravity ................................................ 2B (T 227), (D 1298), (T 228), (D 70),
(T 229), (D 71)
Spot test............................................................. 2A (T 102)
Thin-film oven test............................................ 2A (T 179)
2B (T 240)
Viscosity:
Absolute ........................................................ 2A (T 202), (D 2171)
Kinematic ...................................................... 2A (T 201), (D 2170)
Saybolt........................................................... 2A (T 72), (D 88)
Bituminous paving mixtures................................. 2A (T 42), (D 545), (T 78), (D 402), (T 165),
(D 1075), (T 168), (D 979)
2B (T 228), (D 70)
Bituminous roofing membranes ........................... 2A (T 53), (D 36)
Bituminous mixtures:
Air voids ........................................................... 2B (T 269)
Bitumen in......................................................... 2A (T 164)
2B (T 287)
Centrifuge ......................................................... 2A (T 164)
Coating and stripping ........................................ 2A (T 182), (T 195)
Cohesion ........................................................... 2B (T 246)
Compaction ....................................................... 2B (T 230), (T 269)
Compressive strength........................................ 2A (T 167), (D 1074)
Effect of water................................................... 2A (T 165), (D 1075)
Hot extraction (Abson Method) ....................... 2A (T 170)
Marshall ........................................................... 2B (T 245)
Maximum specific gravity ................................ 2A (T 209)
Moisture-induced damage ................................ 2B (T 283)
Moisture or volatile distillates........................... 2A (T 110)
Plastic flow, Marshall ...................................... 2B (T 245)
Sampling .......................................................... 2A (T 168), (D 979)
Specific gravity ................................................. 2A (T 166)
2B (T 275)
Stripping of ...................................................... 2A (T 182), (T 195)
Bleeding of concrete............................................. 2A (T 158)

Index II-3 AASHTO

 PART II — TESTS — INDEX

PART SPECIFICATION NUMBER

Bonded layers ....................................................... 2B (T 323)

Brick:
Building, sampling, and testing ........................ 2A (T 32), (C 67)
Brinell hardness test, metallic materials ............... 2A (T 70), (E 10)
British pendulum tester ........................................ 2B (T 278)
British Wheel........................................................ 2B (T 279)

C
Calcium carbide gas pressure moisture tester....... 2A (T 143), (D 345)
2B (T 217)
Calcium chloride................................................... 2A (T 143), (D 345)
Calcium chloride, sampling and testing................ 2A (T 143), (D 345)
Calibration ............................................................ 2A (T 67), (E 4), (T 80), (E 18), (T 200),
(E 70)
Calibration platform:
Torque transducer calibrating ........................... 2B (T 282)
Wheel force calibrating..................................... 2B (T 282)
California Bearing Ratio....................................... 2A (T 193)
Carbon steel plate ................................................. 2A (T 68), (E 8)
Carbon steel wire .................................................. 2A (T 68), (E 8)
Castings ................................................................ 2A (T 68), (E 8)
Cement.................................................................. 2A (T 59), (D 244), (T 134), (D 558)
Cement content:
Hardened concrete............................................. 2A (T 178)
Cement, hydraulic:
Air content of mortar......................................... 2A (T 137)
Chemical analysis.......................................... 2A (T 105)
Compressive strength .................................... 2A (T 106M/T 106)
False set paste................................................ 2A (T 186)
False set mortar ............................................. 2A (T 185)
Fineness:
Air permeability ............................................ 2A (T 153)
0.150-mm sieve ............................................ 2A (T 128)
0.075-mm sieve ............................................. 2A (T 128)
0.045-mm sieve ............................................. 2A (T 192)
Turbidimeter.................................................. 2A (T 98)
Freezing and thawing test for:
Air-entraining additions ................................ 2A (T 188)
Normal consistency........................................... 2A (T 129)
Sampling .......................................................... 2A (T 127)
Soundness ........................................................ 2A (T 107)
Specific gravity ................................................. 2A (T 133)
Tensile strength................................................. 2A (T 132)
Time of setting:
Gillmore Needles........................................... 2A (T 154)
Vicat Needle .................................................. 2A (T 131)

Index II-4 AASHTO

 PART II — TESTS — INDEX

PART SPECIFICATION NUMBER

Cement-treated aggregate ..................................... 2A (T 211)

Centrifuge test for bituminous mixtures ............... 2A (T 164)
Chace indicator, air content by ............................. 2A (T 199)
Change in length................................................... 2A (T 32), (C 67)
Charpy impact test ................................................ 2B (T 266), (E 23)
Chemical analysis ................................................. 2A (T 200), (E 70)
Chemical analysis of lime..................................... 2B (T 219)
Chemical analysis of hydraulic cement ................ 2A (T 105)
Chemical resistance ............................................. 2A (T 42), (D 545)
Chloride permeability of concrete ........................ 2B (T 277)
Chloride ion content in soil................................... 2B (T 291)
Classification (standards) .................................... 2A (T 59), (D 244)
Clay lumps in aggregate ....................................... 2A (T 112)
Clay pipe............................................................... 2B (T 281)
Clay products (structural) .................................... 2A (T 32)
Cleveland open cup .............................................. 2A (T 48), (D 92)
Coal tar ................................................................. 2A (T 53), (D 36)
Coarse aggregate: 2A (T 96), (C 131)
Accelerated polishing using British Wheel ...... 2B (T 279)
Clay lumps ........................................................ 2A (T 112)
Freezing and thawing ........................................ 2A (T 103)
Lightweight pieces ............................................ 2A (T 113)
Los Angeles abrasion test ................................. 2A (T 96), (C 131)
Materials finer than 0.075-mm sieve................. 2A (T 11)
Sampling ........................................................... 2A (T 2), (D 75)
Sieve analysis.................................................... 2A (T 27)
Soundness, sulfate solution ............................... 2A (T 104)
Specific gravity and absorption......................... 2A (T 85)
Unit weight........................................................ 2A (T 19/T 19M)
Coating of bituminous aggregate mixtures:
Bituminous film retention ................................. 2A (T 182)
Paraffin for specific gravity test........................ 2B (T 275)
Coatings................................................................ 2B (T 244)
Cohesive soil, compressive strength..................... 2A (T 208)
Cohesive soils ...................................................... 2B (T 297), (D 4767)
Compacted bituminous paving mixtures .............. 2A (T 165), (D 1075)
Compacted Hot-mix asphalt ................................. 2B (T 324)
Compaction........................................................... 2B (T 312)
Compaction and density of soil ............................ 2A (T 99), (T 180)
Compaction of bituminous mixtures..................... 2B (T 230)
Compaction measurement .................................... 2A (T 134), (D 558)
Correction for coarse particles.............................. 2B (T 224)
Complex modulus................................................. 2B (T 315)
Compressive strength:
Bituminous mixtures ......................................... 2A (T 167), (D 1074)
Brick.................................................................. 2A (T 32), (C 67)
Cohesive soil .................................................... 2A (T 208)

Index II-5 AASHTO

 PART II — TESTS — INDEX

PART SPECIFICATION NUMBER

Compressive strength—cont’d
Concrete:
Capping freshly molded concrete cylinders .. 2B (T 231)
Early-age test values...................................... 2B (T 276)
Expansion of mortar bars due
to alkali-silica reaction ................................. 2B (T 303)
Modified cube test ......................................... 2A (T 140)
Molded specimens ......................................... 2A (T 22)
Projecting later-age strengths ........................ 2B (T 276)
Consistency ....................................................... 2A (T 119)
Culvert pipe (See Concrete pipe)
Curing materials................................................ 2A (T 155)
Density .............................................................. 2B (T 271)
Flexural strength:
Center-point loading...................................... 2A (T 177)
Specimens taken from hardened concrete ..... 2A (T 24)
Third-point loading........................................ 2A (T 97)
Freezing and thawing ........................................ 2A (T 161)
Joint filler .......................................................... 2A (T 42), (D 545)
Length of cores ................................................. 2A (T 148)
Length change................................................... 2A (T 160)
Length change................................................... 2A (T 160)
Mass per cubic foot ........................................... 2A (T 121)
Modified cube test ............................................ 2A (T 140)
Molded specimens ............................................ 2A (T 22)
Preparation of specimens:
Capping ......................................................... 2B (T 231)
In the field .................................................... 2A (T 23)
In the laboratory ............................................ 2A (T 126)
Pipe and pipe testing ......................................... 2B (T 280)
Sampling ........................................................... 2A (T 141)
Section and section testing ................................ 2B (T 280)
Sewer pipe (See Concrete pipe)
Specimens taken from:
Hardened concrete ......................................... 2A (T 24)
Fine aggregate................................................... 2A (T 71)
Hydraulic cement .............................................. 2A (T 106M/T 106)
Rock core specimens......................................... 2B (T 226)
Soil-lime mixtures ............................................ 2B (T 220)
Unconfined cohesive soil .................................. 2A (T 208)
Splitting tensile strength ................................... 2A (T 198)
Surface frictional properties.............................. 2B (T 278)
Tile and tile testing............................................ 2B (T 280)
Time of setting ................................................. 2A (T 197)
Volume change ................................................. 2A (T 160)
Water for ........................................................... 2A (T 26)
Yield.................................................................. 2A (T 121)

Index II-6 AASHTO

 PART II — TESTS — INDEX

PART SPECIFICATION NUMBER

Compression testing:
Concrete (general) ................................................ 2A (T 42), (D 545), (T 143), (D 345)
2B (T 325)
Concrete, portland cement .................................... 2B (T 323)
Concrete, temperature of freshly mixed Portland 2B (T 309), (C 1064)
Air content:
Chace indicator.............................................. 2A (T 199)
Gravimetric.................................................... 2A (T 121)
Pressure ........................................................ 2A (T 152)
Volumetric..................................................... 2A (T 196)
Air-entraining admixture................................... 2A (T 157)
Bleeding ............................................................ 2A (T 158)
Cement content of hardened concrete ............... 2A (T 178)
Chloride ion penetration ................................... 2B (T 259)
Chloride ion testing........................................... 2B (T 260)
Chloride permeability ....................................... 2B (T 277)
Consistency........................................................... 2A (T 49), (D 5)
Consistency, normal, of hydraulic cement............ 2A (T 59), (D 244), (T 129), (T 134), (D 558)
Consolidation ....................................................... 2B (T 297), (D 4767)
Consolidation properties of soils ......................... 2B (T 216)
Constant head testing ........................................... 2A (T 215), (D 2434)
Constant rate-of-traverse (CRT) ........................... 2A (T 67), (E 4)
Construction non-extruding and resilient types .... 2A (T 42), (D 545)
Copper alloy castings............................................ 2A (T 68), (E 8)
Core drilling.......................................................... 2B (T 225)
Cored brick ........................................................... 2A (T 32), (C 67)
Creep compliance ................................................. 2B (T 322)
Creosote general ................................................... 2A (T 62), (D 246)
Coal tar materials .............................................. 2A (T 62), (D 246)
Diametral........................................................... 2B (T 322)
Distillation......................................................... 2A (T 62), (D 246)
Crude oils.............................................................. 2B (T 227), (D 1298)
Culvert pipe, tests (See Culvert pipe)
Cutback asphalts ................................................... 2A (T 78), (D 402)
Cylinders, compressive strength of concrete ........ 2A (T 22)
Curing materials ................................................... 2A (T 155)

D
Deep frogged brick ............................................... 2A (T 32), (C 67)
Deflection measurements ..................................... 2B (T 256)
Deformation.......................................................... 2B (T 297), (D 4767)
Degradation .......................................................... 2A (T 131)
Delivery ................................................................ 2A (T 40), (D 140), (T 168), (D 979)
Demulsibility ........................................................ 2A (T 59), (D 244)
Density.................................................................. 2A (T 42), (D 545)
2B (T 227), (D 1298), (T 228), (D 70),
(T 229), (D 71), (T 312)
Density and compaction of soil ............................ 2A (T 99), (T 180)

Index II-7 AASHTO

 PART II — TESTS — INDEX

PART SPECIFICATION NUMBER

Density of petroleum ............................................ 2B (T 227), (D 1298)

Density of soil in-place:
Block, chunk, or core sampling......................... 2B (T 233)
Sand-cone.......................................................... 2A (T 191)
Determination of bitumen..................................... 2A (T 44)
Direct tension........................................................ 2B (T 314)
Discontinuous yielding ......................................... 2A (T 68), (E 8)
Displacement method ........................................... 2B (T 229), (D 71)
Distillate fuels....................................................... 2A (T 55), (D 95)
Distillation (general) ............................................ 2A (T 55), (D 95), (T 62), (D 246),
(T 78), (D 402)
Distillation:
Creosote ............................................................ 2A (T 62), (D 246)
Cutback asphalt................................................. 2A (T 78), (D 402)
Emulsions.......................................................... 2A (T 59), (D 244)
Disturbed soil samples, preparation:
Dry method ....................................................... 2A (T 87)
Wet method....................................................... 2A (T 146)
Drain tile, tests...................................................... 2B (T 280)
Drainage ............................................................... 2B (T 297), (D 4767)
Drying oils ............................................................ 2A (T 151), (D 555)
DSR ...................................................................... 2B (T 315)
Ductility of bituminous materials ......................... 2A (T 51), (D 113)
Dynaflect .............................................................. 2B (T 317)
Dynamic sheer rheometer ..................................... 2B (T 315)

E
Eccentric force application ................................... 2A (T 68), (E 8)
Efflorescence ........................................................ 2A (T 32), (C 67)
Elastic extension ................................................... 2A (T 68), (E 8)
Electrometric measurements................................. 2A (T 200), (E 70)
Electrodes ............................................................. 2A (T 200), (E 70)
Elongation............................................................. 2A (T 51), (D 113), (T 68), (E 8)
Elutriation test of aggregates ................................ 2A (T 11)
Emulsified asphalts, test of ................................... 2A (T 59), (D 244)
Environmental tests:
See Vol. 1, R 23 and R 24
Equivalent age ...................................................... 2B (T 325)
Estimating concrete strength................................. 2B (T 325)
Evaluation of air-entraining additives................... 2A (T 188)
Expansion ............................................................. 2A (T 42), (D 545)
Expansion, autoclave ............................................ 2A (T 107)
Expansion, joint filler, test of ............................... 2A (T 42), (D 545)
Expansion pressure of soils: (T 190)
Extension-under-load............................................ 2A (T 68), (E 8)
Extensometers....................................................... 2A (T 68), (E 8)
Extracted aggregates, mechanical analysis ........... 2A (T 30)

Index II-8 AASHTO

 PART II — TESTS — INDEX

PART SPECIFICATION NUMBER

Extraction ............................................................. 2B (T 319)

Extraction of bituminous mixtures:
Abson procedure ............................................... 2A (T 170)
Extrusions ............................................................. 2A (T 42), (D 545)

F
Failure .................................................................. 2B (T 314)
Failure strain......................................................... 2B (T 314)
Falling Weight Deflectometer .............................. 2B (T 317)
False set of Portland cement ................................. 2A (T 185), (T 186)
Fatigue life............................................................ 2B (T 321)
Field vane shear in cohesive soil ......................... 2B (T 223)
Filler, mineral ....................................................... 2A (T 37)
Fine aggregate:
Absorption......................................................... 2A (T 84)
Clay lumps in .................................................... 2A (T 112)
Elutriation ......................................................... 2A (T 11)
Friable particles................................................. 2A (T 112)
Freezing and thawing ........................................ 2A (T 103)
Lightweight material ......................................... 2A (T 113)
Mortar strength.................................................. 2A (T 71)
Organic impurities............................................. 2A (T 21)
Sampling ........................................................... 2A (T 2), (D 75)
Sieve analysis.................................................... 2A (T 27)
Soundness (sulfate solution) ............................ 2A (T 104)
Specific gravity ................................................. 2A (T 84)
Uncompacted void content................................ 2B (T 304)
Unit weight........................................................ 2A (T 19T/T 19M)
Fineness of cement:
Air permeability ................................................ 2A (T 153)
0.075-mm sieve................................................. 2A (T 128)
0.0045 mm-sieve............................................... 2A (T 192)
Turbidimeter ..................................................... 2A (T 98)
Fire point, bituminous materials ........................... 2A (T 48), (D 92)
Fire testing ............................................................ 2A (T 48), (D 92)
Flammability......................................................... 2A (T 73), (D 93)
Flash point ........................................................... 2A (T 73), (D 93)
Flash point, bituminous materials:
Open cup ........................................................... 2A (T 48), (D 92)
Pensky-Martens................................................. 2A (T 73), (D 93)
Flexural bending ................................................... 2B (T 321)
Flexural creep stiffness ......................................... 2B (T 313)
Flexural creep compliance.................................... 2B (T 313)
Flexural strength:
Brick.................................................................. 2A (T 32), (C 67)
Concrete:
Center-point loading...................................... 2A (T 177)

Index II-9 AASHTO

 PART II — TESTS — INDEX

PART SPECIFICATION NUMBER

Specimens taken from hardened concrete ..... 2A (T 24)

Third-point loading ....................................... 2A (T 97)
Float test ............................................................... 2A (T 50), (D 139)
Float test, bituminous materials ............................ 2A (T 50), (D 139)
Force ductility of bituminous material.................. 2B (T 300)
Force verification.................................................. 2A (T 67), (E 4)
Fracture................................................................. 2B (T 314)
Free-running crosshead speed............................... 2A (T 68), (E 8)
Freezing and thawing (general) ........................... 2A (T 32), (C 67), (T 59), (D 244)
Aggregate.......................................................... 2A (T 103)
Air-entraining additions to cement.................... 2A (T 157)
Brick.................................................................. 2A (T 32), (C 67)
Concrete ............................................................ 2A (T 161)
Drain tile ........................................................... 2B (T 280)
Soil-cement mixtures..................................... 2A (T 136)
Friable particles .................................................... 2A (T 112)
Frequency sweep .................................................. 2B (T 320)
Fuel oils ................................................................ 2A (T 72), (D 88), (T 73), (D 93)
Furol viscosity ...................................................... 2A (T 72), (D 88)
FWD ..................................................................... 2B (T 317)

G
Galvanizing:
Weight of coating.............................................. 2A (T 65M/T 65)
Gillmore Needles, time of setting ......................... 2A (T 154)
Glass electrodes .................................................... 2A (T 200), (E 70)
Glass electrode for pH determinations.................. 2A (T 200), (E 70)
Granular soils........................................................ 2A (T 215), (D 2434)
Gravel, (See Coarse aggregate)
Gyratory................................................................ 2B (T 312)

H
Halt-of-the-force................................................... 2A (T 68), (E 8)
Hamburg ............................................................... 2B (T 324)
Hardness tests ....................................................... 2A (T 70), (E 10), (T 80), (E 18)
Hardness test, metallic materials:
Brinell ............................................................... 2A (T 70), (E 10)
Rockwell ........................................................... 2A (T 80), (E 18)
Rockwell superficial ......................................... 2A (T 80), (E 18)
Heat loss/savings .................................................. 2A (T 47), (D 6)
High float.............................................................. 2A (T 50), (D 139)
Hydraulic cement (See Cement)
Hydrometer analysis ............................................. 2B (T 227), (D 1298)

I
Impact resistance .................................................. 2B (T 266), (E 23)
Impact sampling tests ........................................... 2B (T 243M/T 243), (T 244)

Index II-10 AASHTO

 PART II — TESTS — INDEX

PART SPECIFICATION NUMBER

Impact testing ....................................................... 2B (T 266), (E 23)

Inorganic matter or ash ......................................... 2A (T 111)
Iron ....................................................................... 2A (T 68), (E 8)
Iron castings (testing) .......................................... 2A (T 68), (E 8)
Izod impact testing................................................ 2B (T 266), (E 23)

J
Joint filler, preformed expansion.......................... 2A (T 42), (D 545)
Joint fillers (concrete) .......................................... 2A (T 42), (D 545)
Joints, coated dowel bars ...................................... 2B (T 253)

K
Kinematic viscosity (general) .............................. 2A (T 72), (D 88)
Kinematic viscosity of asphalt.............................. 2A (T 201), (D 2170)

L
Latex paints .......................................................... 2A (T 200), (E 70)
Layer moduli ........................................................ 2B (T 317)
Length of concrete cores....................................... 2A (T 148)
Length change of mortar and concrete ................. 2A (T 160)
Lightweight pieces in aggregate ........................... 2A (T 113)
Lime:
Chemical constituents and content.................... 2B (T 232)
Particle sizes...................................................... 2B (T 219)
Sampling ........................................................... 2B (T 218)
Linear variable differential transducer.................. 2B (T 322)
Liquid limit........................................................... 2A (T 89)
Liquids.................................................................. 2A (T 73), (D 93)
Load-measuring machines .................................... 2A (T 67), (E 4)
Los Angeles abrasion............................................ 2A (T 96), (C 131)
Los Angeles test ................................................... 2A (T 96), (C 131)
Loss on heating of bituminous materials .............. 2A (T 47), (D 6)
Lubricating oils..................................................... 2A (T 73), (D 93)

M
Magnesium sulfate soundness test........................ 2A (T 104)
Manufacturing processes ...................................... 2A (T 40), (D 140), (T 168), (D 979)
Masonry................................................................ 2A (T 32), (C 67)
Maturity: 2B (T 325)
Maturity function .............................................. 2B (T 325)
Maturity index................................................... 2B (T 325)
Maximum dry density........................................... 2A (T 134), (D 558)
Mechanical analysis:
Aggregate.......................................................... 2A (T 27)
Extracted aggregate .......................................... 2A (T 30)
Mineral filler..................................................... 2A (T 37)
Soil.................................................................... 2A (T 88)

Index II-11 AASHTO

 PART II — TESTS — INDEX

PART SPECIFICATION NUMBER

Mechanical mixing ............................................... 2A (T 162)

Metal electrical conductors................................... 2A (T 68), (E 8), (T 80), (E 18)
Metallic hardness.................................................. 2A (T 70), (E 10)
Metallic materials:
Brinell hardness............................................... 2A (T 70), (E 10)
Impact.............................................................. 2B (T 243M/T 243), (T 244), (T 266)
Rockwell hardness .......................................... 2A (T 80), (E 18)
Rockwell superficial hardness......................... 2A (T 80), (E 18)
Tensile strength ............................................... 2A (T 68), (E 8)
Tension testing of metallic materials
(metric) ........................................................... 2A (T 68M), (E 8M)
Metals/alloys analysis instrumentation................. 2A (T 80), (E 18)
Mineral filler:
Mechanical analysis ........................................ 2A (T 37)
Miscibility............................................................. 2A (T 59), (D 244)
Mixing, mechanical of hydraulic cement ............. 2A (T 162)
Mixtures, bituminous (See Bituminous mixtures)
Modified cube test for concrete ............................ 2A (T 140)
Moisture analysis.................................................. 2A (T 134), (D 558), (T 165), (D 1075)
Moisture-density................................................... 2A (T 134), (D 558)
Moisture-density relations:
Soil:
5.5-lb rammer .............................................. 2A (T 99)
10-lb rammer ............................................... 2A (T 80)
Soil-cement mixtures ................................... 2A (T 134), (D 558)
Moisture-susceptibility ......................................... 2B (T 324)
Mortar, cement:
Length change ................................................. 2A (T 168), (D 979)
Mechanical mixing.......................................... 2A (T 162)

N
Normal consistency of hydraulic cement.............. 2A (T 129)
Notched-bar impact ............................................. 2B (T 266), (E 23)
Notches ................................................................. 2B (T 266), (E 23)

O
Oil:
Drying ............................................................. 2A (T 151), (D 555)
Loss on heating ............................................... 2A (T 47), (D 6)
Oils ....................................................................... 2A (T 47), (D 6), (T 72), (D 88)
Open cup:
Flash and fire points ........................................ 2A (T 48)
Flash point....................................................... 2A (T 79)
Organic impurities in sand.................................... 2A (T 21)
Organic matter in soils.......................................... 2A (T 194), (T 267)
Out of square ........................................................ 2A (T 32), (C 67)
Ovens.................................................................... 2A (T 47), (D 6)

Index II-12 AASHTO

 PART II — TESTS — INDEX

PART SPECIFICATION NUMBER

P
Package stability ................................................... 2A (T 200), (E 70)
Painting, testing epoxy resin adhesive.................. 2B (T 237)
Paraffin, coating of bituminous:
Aggregate mixtures ........................................... 2B (T 275)
Pavement friction .............................................. 2B (T 242)
Particle charge test................................................ 2A (T 59), (D 244)
Paving materials ................................................... 2B (T 228), (D 70)
Penetration............................................................ 2A (T 42), (D 545), (T 49), (D 5)

Penetration, bituminous materials......................... 2A (T 49), (D 5)

Penetration resistance of concrete......................... 2A (T 197)
Pensky-Martens closed tester ............................... 2A (T 73), (D 93)
Percent elongation ................................................ 2A (T 68), (E 8)
Permanent strain ................................................... 2B (T 320)
Permeability.......................................................... 2A (T 215), (D 2434)
Petroleum products (general) ............................... 2A (T 48), (D 92), (T 55), (D 95), (T 73),
(D 93), (T 155)
2B (T 277), (D 1298)
Petroleum products:
Density .............................................................. 2B (T 227), (D 1298)
Specific gravity ................................................. 2B (T 227), (D 1298)
Water in............................................................. 2A (T 55), (D 95)
pH ......................................................................... 2A (T 200), (E 70)
pH valve for corrosion testing .............................. 2B (T 289)
Piles, vertical or batter .......................................... 2B (T 298)
Pipe:
Clay................................................................... 2B (T 281)
Corrugated steel pipe ........................................ 2B (T 241)
Helical lock seam .............................................. 2B (T 249)
Tests and acceptances ....................................... 2B (T 280)
Vitrified clay (See Pipe, clay)
Pitches .................................................................. 2B (T 228), (D 70), (T 229), (D 71)
Plastic extension ................................................... 2A (T 68), (E 8)
Plastic fines in:
Aggregates and soils ......................................... 2A (T 176)
Production ......................................................... 2A (T 210)
Plastic flow, bituminous mixtures ........................ 2B (T 245)
Plastic limit of soils .............................................. 2A (T 90)
Plate materials (general) ...................................... 2A (T 68), (E 8)
Polishing:
Aggregate.......................................................... 2B (T 279)
Pore-water............................................................. 2B (T 297), (D 4767)
Portland cement (See Cement)
Pouring temperature ............................................. 2A (T 50), (D 139)
Preformed expansion joint fillers.......................... 2A (T 42), (D 545)
Preparation of concrete specimens:

Index II-13 AASHTO

 PART II — TESTS — INDEX

PART SPECIFICATION NUMBER

Capping............................................................. 2B (T 231)
In the field ......................................................... 2A (T 23)
In the laboratory................................................ 2A (T 126)
Preparation of disturbed soil samples for test:
Dry method ....................................................... 2A (T 87)
Wet method....................................................... 2A (T 146)
Pressure testing ..................................................... 2B (T 297), (D 4767)
Pycnometer ........................................................... 2B (T 228), (D 70)

Q
Quality control...................................................... 2A (T 68), (E 8)

R
Rate of stressing/straining..................................... 2A (T 68), (E 8)
Recovery............................................................... 2A (T 42), (D 545)
2B (T 319)
Reflective materials and devices .......................... 2B (T 257)
Reinforcing steel................................................... 2B (T 285)
Reinforced concrete and sewer pipe tests
(See Concrete pipe)
Repeated shear...................................................... 2B (T 320)
Residue ................................................................. 2A (T 59), (D 244), (T 78), (D 402)
Resilient expansion joint fillers ............................ 2A (T 42), (D 545)
Reverse-flow viscometers..................................... 2A (T 201), (D 2170)
Ring-and-ball apparatus........................................ 2A (T 53), (D 36)
Ring-and-ball method, bituminous materials........ 2A (T 53), (D 36)
Road oil ................................................................ 2A (T 201), (D 2170)
Road Rater ............................................................ 2B (T 317)
Rockwell hardness test ......................................... 2A (T 80), (E 18)
Rockwell superficial hardness test........................ 2A (T 80), (E 18)
Rotary evaporator ................................................. 2B (T 319)
Round specimens.................................................. 2A (T 68), (E 8)
Rutting .................................................................. 2B (T 324)

S
Sampling (general) .............................................. 2A (T 32), (C 67), (T 40), (D 140), (T 143),
(D 345), (T 168), (D 979)
Sampling:
Aggregate.......................................................... 2A (T 2), (D 75)
Bituminous materials ........................................ 2A (T 40), (D 140)
Building brick ................................................... 2A (T 32), (C 67)
Calcium chloride ............................................... 2A (T 143), (D 345)
Fresh concrete ................................................... 2A (T 141)
Gravel................................................................ 2A (T 2), (D 75)
Hydraulic cement .............................................. 2A (T 127)
Hydrated lime.................................................... 2B (T 218)
Sand .................................................................. 2A (T 2), (D 75)
Slag ................................................................... 2A (T 2), (D 75)

Index II-14 AASHTO

 PART II — TESTS — INDEX

PART SPECIFICATION NUMBER

Soil:
Split-barrel .................................................... 2A (T 206)
Thin-walled tube............................................ 2A (T 207)
Steel............................................................... 2B (T 243M/T 243)
Stone.............................................................. 2A (T 2), (D 75)
Stone block .................................................... 2A (T 2), (D 75)
Sampling concrete/mortar/ aggregates.................. 2A (T 2), (D 75)
Sand: (See Fine aggregate)
Sand-cone method ................................................ 2A (T 191)
Sand equivalent test .............................................. 2A (T 176)
Sand time:
By Gillmore needles.......................................... 2A (T 154)
By Vicat needle................................................. 2A (T 131)
Early stiffening of concrete............................... 2A (T 186)
False set............................................................. 2A (T 185)
Penetration, by .................................................. 2A (T 197)
Saybolt-Furol viscometers .................................... 2A (T 59), (D 244), (T 72), (D 88)
Semi-solid materials ............................................. 2A (T 40), (D 140), (T 49), (D 5), (T 168),
(D 979)
2B (T 228), (D 70)
Settlement ............................................................. 2A (T 59), (D 244)
Sewer pipe, tests ................................................... 2B (T 280)
Shear testing ......................................................... 2B (T 320)
Sheet materials (general) ..................................... 2A (T 68), (E 8)
Sheet metal .......................................................... 2A (T 68), (E 8)
Shrinkage factors of soil ...................................... 2A (T 92)
Sieve analysis (general) ....................................... 2A (T 59), (D 244)
Sieve analysis:
Aggregate......................................................... 2A (T 27)
Extracted aggregate.......................................... 2A (T 30)
Lime ................................................................. 2B (T 219)
Mineral filler .................................................... 2A (T 37)
Soil ................................................................... 2A (T 88)
Simple shear ......................................................... 2B (T 320)
Site investigation .................................................. 2B (T 225)
Signs ..................................................................... 2B (T 257)
Skid resistance ...................................................... 2B (T 242)
Slag (See Coarse aggregate)
Slump test of concrete .......................................... 2A (T 119)
Sodium sulfate soundness test .............................. 2A (T 104)
Softening point of bituminous material ................ 2A (T 53), (D 36)
Soil ....................................................................... 2A (T 134), (D 558), (T 215), (D 2434),
2B (T 235), (D 1194)
Soil-cement........................................................... 2A (T 134), (D 558)
Soil-cement mixtures:
Freezing and thawing ........................................ 2A (T 136)
Moisture-density relations................................. 2A (T 134), (D 558)
Wetting and drying............................................ 2A (T 135)

Index II-15 AASHTO

 PART II — TESTS — INDEX

PART SPECIFICATION NUMBER

Soil-lime mixtures............................................. 2B (T 220)

Lime content ..................................................... 2B (T 232)
Soils:
California Bearing Ratio ................................... 2A (T 193)
Compaction and density correction
for coarse particles ............................................ 2A (T 99), (T 180)
2B (T 224)
Block, chunk, or core sampling ..................... 2B (T 233)
Diamond core drilling.................................... 2B (T 225)
Expansion pressure test ................................. 2A (T 190)
Dry preparation for test ................................. 2A (T 87)
Expansion pressure test ................................. 2A (T 190)
Expansive determination ............................... 2A (T 258)
Sand-cone ...................................................... 2A (T 191)
Direct shear test................................................. 2B (T 236)
Family of curves ............................................... 2B (T 272)
Field vane shear ................................................ 2B (T 223)
Granular soil materials, grain-size analysis....... 2B (T 311)
Liquid limit ....................................................... 2A (T 89)
Mechanical analysis .......................................... 2A (T 88)
Moisture:
By calcium carbide method ........................... 2B (T 217)
By laboratory determination.......................... 2B (T 265)
Moisture-density relations:
5.5-lb rammer ................................................ 2A (T 99)
10-lb rammer..................................................... 2A (T 180)
Organic matter .................................................. 2A (T 194), (T 267)
Permeability ...................................................... 2A (T 215), (D 2434)
Plastic limit ....................................................... 2A (T 90)
Plasticity index.................................................. 2A (T 90)
Plate load test:
Nonrepetitive ................................................. 2B (T 222)
Repetitive ...................................................... 2B (T 221)
Pore pressure..................................................... 2B (T 252)
Preparation for tests:
Dry method.................................................... 2A (T 87)
Sand-cone method ......................................... 2A (T 191)
Sand equivalent test....................................... 2A (T 176)
Shrinkage factors........................................... 2A (T 92)
Slope inclinometer......................................... 2B (T 254)
Specific gravity.............................................. 2A (T 100)
Split-barrel sampling ..................................... 2A (T 206)
Suction........................................................... 2B (T 273)
Thin-walled tube............................................ 2A (T 207)
Unconfined compressive strength ................. 2A (T 208)
Wet combustion............................................. 2A (T 194)
Wet method ................................................... 2A (T 146)

Index II-16 AASHTO

 PART II — TESTS — INDEX

PART SPECIFICATION NUMBER

Wet preparation for test ................................. 2A (T 146)

Soil resistivity....................................................... 2B (T 288)
Subgrade soils....................................................... 2B (T 307)
Solid phase materials ............................................ 2A (T 40), (D 140), (T 49), (D 5), (T 73),
(D 93)
Solubility of bituminous materials........................ 2A (T 44)
Soundness test for:
Aggregate:
Freezing and thawing .................................... 2A (T 103)
Sulfate solution.............................................. 2A (T 104)
Hydraulic cement .............................................. 2A (T 107)
Portland cement ................................................ 2A (T 107)
Specific gravity (general) .................................... 2B (T 227), (D 1298), (T 228), (D 70),
(T 229), (D 71)
Specific gravity:
Bituminous materials ........................................ 2B (T 228), (T 229), (T 275)
Bituminous mixtures ......................................... 2A (T 166)
Coarse aggregate ............................................... 2A (T 85)
Fine aggregate................................................... 2A (T 84)
Hydraulic cement .............................................. 2A (T 133)
Maximum, for bituminous paving mixtures...... 2A (T 209)
Petroleum products ........................................... 2B (T 227)
Soil .................................................................... 2A (T 100)
Tar .................................................................... 2B (T 228)
Speller coating: (See Galvanizing)
Spot test, asphalt material ..................................... 2A (T 102)
Spread footings ..................................................... 2B (T 235), (D 1194)
Square................................................................... 2A (T 32), (C 67)
Static load test....................................................... 2B (T 235), (D 1194)
Steel (general) ...................................................... 2A (T 68), (E 8)
Steel:
Bending............................................................. 2B (T 285)
Hardness............................................................ 2A (T 70), (E 10), (T 80), (E 18)
Impact ............................................................... 2B (T 243), (T 244)
Sampling ........................................................... 2B (T 243)
Testing .............................................................. 2B (T 244), (T 285)
Steel castings ........................................................ 2A (T 68), (E 8)
Steel pipe .............................................................. 2A (T 68), (E 8)
Steel sheet/strip..................................................... 2A (T 68), (E 8)
Steel tube .............................................................. 2A (T 68), (E 8)
Steel wire rod........................................................ 2A (T 68), (E 8)
Stiffness ................................................................ 2B (T 320)
Stone:
See also (Coarse aggregate)
Sampling ........................................................... 2A (T 2), (D 75)
Stone block, sampling........................................... 2A (T 2), (D 75)
Storage.................................................................. 2A (T 140), (D 140), (T 168), (D 979)

Index II-17 AASHTO

 PART II — TESTS — INDEX

PART SPECIFICATION NUMBER

Storage stability .................................................... 2A (T 59), (D 244)

Strength ................................................................ 2A (T 68), (E 8), (T 165), (D 1075)
Strength of mortar................................................. 2A (T 106M/T 106), (T 132)
Strength-maturity relationship .............................. 2B (T 325)
Striping, testing thermoplastic line material ......... 2B (T 250)
Stripping of bituminous aggregate mixtures......... 2A (T 182)
Ross count......................................................... 2A (T 195)
Structural applications .......................................... 2A (T 143), (D 345)
Structural clay tile units ........................................ 2A (T 32), (C 67)
Structural steel plate ............................................. 2A (T 68), (E 8)
Suspension fluids.................................................. 2A (T 73), (D 93)
Sulfate, determining water-soluble sulfate ion
content in soil..................................................... 2B (T 290)

T
Tar:
Specific gravity ................................................. 2B (T 228), (D 70)
Taring ................................................................... 2A (T 68), (E 8)
Tars....................................................................... 2A (T 50), (D 139)
2B (T 228), (D 70), (T 70), (E 10)
Temperature correction......................................... 2B (T 317)
Tensile strength: 2B (T 322)
Hydraulic cement .............................................. 2A (T 132)
Metallic materials.............................................. 2A (T 68), (E 8)
Tension creep test ................................................. 2B (T 322)
Tension failure test ............................................... 2B (T 322)
Tension (tensile) properties/tests .......................... 2A (T 51), (D 113), (T 68), (E 8)
Test wheel calibration........................................... 2B (T 282)
Testing machines .................................................. 2A (T 67), (E 4), (T 80), (E 18)
Testing machines, verification of ......................... 2A (T 67)
Texture depth........................................................ 2A (T 261)
Thawing................................................................ 2A (T 32), (C 67)
Thermal cracking.................................................. 2B (T 314)
Thermometers....................................................... 2A (T 73), (D 93)
Thin-walled tube sampling of soils....................... 2A (T 207)
Tile........................................................................ 2A (T 32), (C 67)
Time of setting:
Cement, hydraulic:
Concrete, by penetration resistance ............... 2A (T 197)
Gillmore Needles........................................... 2A (T 154)
Vicat Needle .................................................. 2A (T 131)
Torque transducer calibrating ............................... 2B (T 282)
Traveled surface roughness, determining
vehicular response ................................................ 2B (T 286)
Triaxial compression ............................................ 2B (T 297), (D 4767)
Turbidimeter test of cement.................................. 2A (T 98)

Index II-18 AASHTO

 PART II — TESTS — INDEX

PART SPECIFICATION NUMBER

U
Uncrushed solid material ...................................... 2A (T 40), (D 140)

Unit weight of aggregate ...................................... 2A (T 19/T 19M)

V
Vacuum capillary viscometer ............................... 2A (T 202), (D 2171)
Vacuum testing ..................................................... 2B (T 297), (D 4767)

Vehicular roughness response .............................. 2B (T 286)

Verification of testing machines ........................... 2A (T 67)
Verification........................................................... 2A (T 67), (E 4), (T 80), (E 18)
Viscometers .......................................................... 2A (T 59), (D 244), (T 202), (D 2171)
Viscosity ............................................................... 2A (T 59), (D 244), (T 72), (D 88), (T 202),
(D 2171)
2B (T 316)
Viscosity tests:
Absolute ............................................................ 2A (T 202)
Kinematic.......................................................... 2A (T 201)
Saybolt .............................................................. 2A (T 72)
Viscous liquids/materials...................................... 2A (T 73), (D 93)
Vitrified clay pipe................................................. 2B (T 281)
Voids .................................................................... 2A (T 32), (C 67)
Volatile matter content ......................................... 2A (T 78), (D 402)
Volatilization test, bituminous materials .............. 2A (T 110)
Volume change:
Concrete ............................................................ 2A (T 160)
Mortar ............................................................... 2A (T 160)

W
Warpage................................................................ 2A (T 32), (C 67)
Washing test for aggregates.................................. 2A (T 11)
Water .................................................................... 2A (T 165), (D 1075)
Water absorption .................................................. 2A (T 42), (D 545)
Water content........................................................ 2A (T 55), (D 95), (T 59), (D 244)
Water displacement test........................................ 2B (T 229), (D 71)
Water for concrete, tests ....................................... 2A (T 26)
Water penetration ................................................. 2A (T 49), (D 5)
Water retention of curing materials ...................... 2A (T 155)
Water, test for:
Bituminous mixtures ......................................... 2A (T 110)
Effect on bituminous mixtures .......................... 2A (T 165)
Emulsions.......................................................... 2A (T 59)
Petroleum products ........................................... 2A (T 55)
Weight of aluminum coating on steel ................... 2A (T 213M/T 213)
Weight per cubic foot:

Index II-19 AASHTO

 PART II — TESTS — INDEX

PART SPECIFICATION NUMBER

Aggregates ........................................................ 2A (T 19)

Concrete ............................................................ 2A (T 121)
Wetting and drying of soil-cement mixtures ........ 2A (T 135)
Wheel force calibration ........................................ 2B (T 282)

Wheel track testing ............................................... 2B (T 324)

Wire, test for:
Weight of coating.............................................. 2A (T 65)

Y
Yield of concrete .................................................. 2A (T 121)
Yield strength and yield point............................... 2A (T 68), (E 8)

Z
Zinc coating:
Weight............................................................... 2A (T 65)

Index II-20 AASHTO