MTCNA Ristia

SOAL RISTIA
1. Which of the protocols below is used by Netinstall?

A. dhcp
B. bootp
C. arp
D. rarp
2. Which configuration menu should you use to change router's Winbox default port?
A. /ip firewall filter
B. /ip service
C. /ip firewall service-ports
D. /system resource
3. How many usable IP addresses are there in a 23-bit (255.255.254.0) subnet?
A. 510
B. 512
C. 254
D. 508
4. A wireless interface 'wlan1' is added to a bridge interface 'br-lan'. To enable dhcp-server for wireless
interface 'wlan1', on which interface should dhcp-server be configured?
A. On both 'br-lan' and 'wlan1'

B. On 'wlan1'
C. On 'br-lan'
D. The dhcp-server cannot be enabled neither on
'wlan1', nor on 'br-lan'
5. You have to connect to a RouterBOARD without any previous configuration. Select all possibilities
to connect and do some basic configuration
A. Serial Connection
B. Attach monitor/keyboard
C. MAC-Winbox
D. Telnet
6. Is it possible to limit how many clients are able to connect to an access point?
A. Yes
B. No it's not possible at all
C. Yes, but only with access-lists
7. For user in local PPP Secrets/PPP Profiles database, it is possible to

A. Allow/deny use of more than one login by this
user
B. Allow login by PPPoE and PPTP, but deny login
by L2TP
C. Deny services (like telnet) only for this user or
for one group of users
D. Allow only PPPoE login
E. Set max values for transferred data (Rx/Tx)
8. Which port does PPTP use by default?
A. TCP 1721
B. UDP 1721
C. TCP 1723
D. UDP 1723
9. The highest queue priority is
A. 16
B. 1
C. 8
D. 256
10. Consider a wireless access point with mode=ap-bridge. What is the maximum number of
concurrent clients that can connect to it?
A. 2048
B. 2007
C. 1024
D. 2012
11. When making router configuration export to file which of the statements are true:
A. Export file name should be provided
B. Only full router configuration can be exported
C. The export file can be edited with a standard text
editor after its creation
D. Winbox usernames and passwords are backed up
12. Which are necessary sections in /queue simple to set bandwidth limitation?
A. target-address, max-limit
B. target-address, dst-address, max-limit
C. max-limit
D. target-address, dst-address
13. A client uses a RouterBOARD1000. The clock is configured in '/system clock'. The clock resets to
default after each reboot.
Select the best solution for the problem.
A. Configure '/system ntp client' and set a valid and
reachable NTP server address.
B. Write a script in '/system script' to set the clock
C. Open the router and ensure the CMOS battery is
fine.
D. Configure '/system ntp server' and set a valid and
reachable NTP client address.
14. You want to create an access point for several laptop (non-RouterOS) clients. Select all options
you can set on the MikroTik wireless interface:
A. mode=bridge
B. Security profile for WPA encryption
C. Nstreme to optimize link
D. mode=ap-bridge
15. Which of the following Routes statuses are possible?
A. D = Drop
B. A = Active
C. S = Static
D. C = Connected
16. When viewing the routes in Winbox, some routes will show "DAC" in the first column. These
flags mean:
A. Dynamic, Available, Created

B. Dynamic, Active, Connected
C. Direct, Available, Connected
D. Dynamic, Active, Console
17. Which options can be used when you want to prevent access from one specific address to your
router web interface?
A. Firewall Filter Chain Input
B. Group settings for System users
C. Firewall Filter Chain Forward
D. WWW service from IP Services
18. What does this simple queue do (check the image)?

A. Queue guarantees upload data rate of one
megabit per second for host 192.168.1.10
B. Queue limits host 192.168.1.10 upload data rate
to one megabit per second.
C. Queue guarantees download data rate of one
megabit per second for host 192.168.1.10
D. Queue limits host 192.168.1.10 download data
rate to one megabit per second.
19. Which default route will be active?
/ip route
add disabled=no distance=10 dst-address=0.0.0.0/0 gateway=1.1.1.1
add disabled=no distance=5 dst-address=0.0.0.0/0 gateway=2.2.2.2
A. Route via gateway 2.2.2.2
B. Route via gateway 1.1.1.1
20. Possible actions of ip firewall filter are:
A. log
B. tarpit
C. accept
D. bounce
E. tarp
F. add-to-list
21. PPPoE server only works within one Ethernet broadcast domain that it is connected to. If there is a
router between server and end-user host, it will not be able to create PPPoE tunnel to that PPPoE
server.
22. Which firewall chain should be used for filters that protect your router interface?
A. input
B. post-routing
C. pre-routing
D. forward
23. There can be more than one PPPoE server in a single broadcast domain:
24. Action=redirect allows you to make
A. Enable Local Service

B. Transparent HTTP Proxy
C. Transparent DNS Cache
D. Forward DNS to another device IP address
25. MikroTik RouterBoard serial port can be used directly from RouterOS to control some external
machine (without using IP firewall NAT port forwarding)?
A. Yes, it can be used as an input/output port to control any serial controller
B. It can be used to write to a display, i.e. to send commands but not to receive

MTCNA Ristia

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MTCNA Ristia

Uploaded by

Copyright:

Available Formats

SOAL RISTIA

1. Which of the protocols below is used by Netinstall?

A. On both 'br-lan' and 'wlan1'

7. For user in local PPP Secrets/PPP Profiles database, it is possible to

A. Dynamic, Available, Created

18. What does this simple queue do (check the image)?

19. Which default route will be active?

24. Action=redirect allows you to make

A. Enable Local Service

You might also like