Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Patriot #16: Parkside Professional Products LTD

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Parkside Professional Products Ltd.

4777 Kent Avenue


Niagara Falls, Ontario L2H 1J5
Telephone: (905) 358-8364, Fax: (905) 358-9680

PA16
I – CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Date of MSDS: December 1, 2017
WHMIS: Not a WHMIS-controlled product
Patriot #16 HMIS: Health
Flammability
2
0
Use: Disinfectant Cleaner Concentrate Reactivity 0
Code: PA16 PPE B

This product is designed to be mixed with water in a dilution control system at a standard 1:128 dilution.

Emergency Telephone # CANUTEC 613-996-6666


2 – HAZARD IDENTIFICATION
Irritancy of Product: mild
Physical State: liquid
EMERGENCY: Keep out of reach of children. May be corrosive to eyes. Causes skin burns.
May be harmful if swallowed.

Principle Routes of Exposure: Eye contact. Skin contact. Inhalation.

Acute Effects
Eye Contact: Concentrate may cause irreversible damage.
Skin Contact: Concentrate may cause skin burn.
Inhalation: May cause irritation effects to nose, throat and respiratory tract system.
Ingestion: Harmful if swallowed.

See Toxicological information (section 11 and 3)


3 – COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name Wt/Wt % CAS # LD50 (mg/kg) LC50
Di-(C8-C10)-alkyl dimethyl 1-5 68424-95-3 500 oral rat not available
ammonium chloride
Alkyl dimethyl benzyl 1-5 68424-85-1 426 oral rat not available
ammonium chloride(C12-C16)
Tetrasodium ethylene 1-5 64-02-8 1658 oral rat not available
diaminetetraacetate
4 - FIRST AID MEASURES
Eye Contact: Immediately flush eyes with running water for 15-20 minutes, keeping eyelids open. Get medical attention immediately.
Skin Contact: Immediately flush with plenty of water for 15-20 minutes. If irritation persists, get medical attention.
Inhalation: If breathing is affected, remove to fresh air. If symptoms persist, get medical attention.
Ingestion: If swallowed, give 1 to 2 glasses of water if the patient is able to swallow. IMMEDIATELY CONTACT A PHYSICIAN
POISON CENTER. DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by
mouth to an unconscious person.
Note to Physician: If the product is ingested, probable mucosal damage may contraindicate the use of gastric lavage. Treat the affected
person appropriately.
5 - FIRE FIGHTING MEASURES
Suitable Extinguishing Media: Use dry chemical, CO2, water spray or "alcohol" foam.
Specific Hazards: Although this product maybe slightly below 93° C(200° F), it is an aqueous solution containing an alcohol and does not
sustain combustion.
Specific Methods: No special methods required.
Special Protective Equipment for Firefighters: As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH
(approved or equivalent) and full protective gear.
Conditions of Flammability: not flammable
UFL: not available
LFL: not available
Flash Point and Test Method: maybe slightly less than 93° C
Sensitivity to Static Discharge or Mechanical Impact: not applicable
Auto-Ignition Temperature: not applicable
Hazardous Combustion Products: oxides of carbon
Means of Extinction: treat for surrounding material & fire
6 – ACCIDENTAL RELEASE MEASURES
Personal Precautions: Use suitable protective equipment (Section 8). Keep out reach of children.
Environmental Precautions: Keep container in a cool, well-ventilated area. Keep container tightly closed. Do not allow to enter drains or
watercourses.
Methods for Cleaning Up: Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container. Water runoff
can cause environmental damage.

- Page 1 of 2 -
Parkside Professional Products Ltd.
4777 Kent Avenue
Niagara Falls, Ontario L2H 1J5
Telephone: (905) 358-8364, Fax: (905) 358-9680

PA16

7 – HANDLING & STORAGE


Handling: Avoid contact with skin, eyes and clothing. Do not taste or swallow. Avoid breathing vapors or mists.
Storage Requirements: Keep out reach of children. Keep container in a cool, well-ventilated area. Keep container tightly closed.
Protect from freezing.
8 – EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures to Reduce Exposure: Good general ventilation should be sufficient to control airborne levels. Respiratory protection
is not required if good ventilation is maintained
Personal Protective Equipment
Eye Protection: Chemical-splash goggles for handling concentrate.
Hand Protection: Chemical-resistant gloves for handling concentrate.
Skin & Body Protection: Wear suitable protective clothing. Use impervious gloves.
Respiratory Protection: In case of insufficient ventilation wear suitable respiratory equipment. Appropriate NIOSH/MSHA
respiratory protection must be used.
Hygiene Measures: Handle in accordance with good industrial hygiene and safety practice.
Ventilation: general ventilation normally adequate
9 - PHYSICAL & CHEMICAL PROPERTIES
Physical State: liquid Viscosity: water thin Vapour Pressure: < 1
Oil/Water Factor: not available Appearance: clear green pH: 6.5-7.5 (neutral)
Vapour Density: not available Evaporation Rate: similar Odour: mild
Specific Gravity: 0.99-1.01 Odour Threshold: not available Freezing Point (oC): < 0
Boiling Point (oC): 100 Flash Point (oC): > 93.9
10 – STABILITY & REACTIVITY
Stability: stable
Polymerization: hazardous polymerization does not occur
Hazardous Decomposition Products: may yield to oxides of carbon & low molecular weight hydrocarbons
Conditions of Reactivity: avoid extreme hot and cold temperatures
Incompatible Substances: strong acids & alkalis, chlorinated products, other disinfectants
Storage Requirements: store in closed containers away from incompatible materials
11 – TOXICOLOGICAL INFORMATION
Acute Toxicity: Corrosive Oral LD50 estimated to be between 1000-2000 mg/kg Dermal LD50 estimated to be > 2000 mg/kg
Component Information: See Section 3 Chronic Toxicity: none known
Carcinogenic Effects: none known Mutagenic Effects: none known
Reproductive Toxicity: none known Target Organ Effects: none known
Synergistic Materials: none known Sensitization: none known
Prolonged or Repeated Exposure - Skin: may cause drying, defatting or dermatitis
12 – ECOLOGICAL INFORMATION
Biodegradability: considered biodegradable inherently (no data available)
BOD/COD values: not available Ecotoxicity: not available
13 – DISPOSAL CONSIDERATION
For Leaks or Spills: Small spills may be absorbed with non-reactive absorbent and placed in suitable, covered labeled containers. Prevent
large spills from entering sewers or waterways. Contact emergency services and supplier for advice.
Waste Disposal: Review all Federal, Provincial & local regulations prior to disposal. Consult your local or regional authorities.
14 – TRANSPORT INFORMATION
Certain shipping modes or package sizes may have exceptions from the transport regulations.
UN CLASSIFICATION: DISINFECTANT, LIQUID, CORROSIVE, N.O.S. (contains quaternary ammonium compound)
Class 8 UN1903 PGIII
See shipping documents for specific transportation information.
15 – REGULATORY INFORMATION
WHMIS: Non-controlled (DIN registered product with Health Canada)
Canada Inventory: All components are listed or exempted.
16 – OTHER INFORMATION
This document has been prepared using data from sources considered technically reliable. It does not constitute a warranty, express or
implied, as to the accuracy of the information contained within. Actual conditions of use and handling are beyond seller’s control. User is
responsible to evaluate all available information when using product for any particular use and to comply with all Federal, State, Provincial
and Local laws and regulations.

- Page 2 of 2 -

You might also like