Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

3.5.2 Architecture of Iso/Iec 15118 V2Iog:: Figure 6: Pilot Signal States

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Figure 6: Pilot Signal States

The function that displays these pilot signal states is called the vehicle state.

Vehicle state Voltage Status Charging possibility


A 12 V Vehicle is not connected Not possible
B 9V Vehicle is connected Not possible
C 6V Charging is possible. Ventilation unnecessary Possible
D 3V Charging is possible. Ventilation necessary Possible
E 0V Vehicle is not connected --‐ supply--‐ Not possible
F -12 V side situation
Vehicle is not connected --‐charger situation Not possible

Table 1: List of vehicle states

3.5.2 Architecture of ISO/IEC 15118 V2IoG:

As on April 2014, both 15118-1(general information and use case definition) and 15118-2 (network
and application protocol requirements) had already been issued as international standards. The rest
of the list of ISO/IEC 15118 international standards are currently in progress, 15118-3 (physical
layer and data link layer requirements), 15118-4 network and application protocol conformance
test), 15118-5 (physical and data link layer conformance tests), 15118-6 (general information and
use case definition for wireless communication) and 15118-7 (Network and application protocol
requirements for wireless communication) and 15118-8 (physical layer and data link layer
requirements for wireless communication).

20

You might also like