General Purpose Relays

PCB Relays Potter & Brumfield

Power PCB Relay RT2

n 2pole 8A, 2 form C (CO) or 2 form A (NO) contacts

n Sensitivecoil 400mW
n 5kV/10mm coil-contact, reinforced insulation
n Ambient temperature 85°C

Typical applications
Boiler control, timers, garage door control, POS automation, interface
modules

VZb
Approvals Coil Data
VDE REG.-Nr. 6106, UL E214025, cCSAus 14385 Coil voltage range 5 to 110VDC
Technical data of approved types on request Operative range, IEC 61810 2
Coil insulation system according UL class F
Contact Data
Contact arrangement 2 form C (CO) or 2 form A (NO) Coil versions, DC coil
Rated voltage 250VAC Coil Rated Operate Release Coil Rated coil
Max. switching voltage 400VAC code voltage voltage voltage resistance power
Rated current 8A, UL: 10A VDC VDC VDC Ω±10% mW
Limiting continuous current 8A, UL: 10A 005 5 3.5 0.5 62 403
Limiting making current, max. 4s, duty factor 10% 15A 006 6 4.2 0.6 90 400
Breaking capacity max. 2000VA 009 9 6.3 0.9 200 400
Contact material AgNi 90/10 012 12 8.4 1.2 360 400
Frequency of operation, with/without load 360/72000h-1 024 24 16.8 2.4 1440 400
Operate/release time max., DC coil 8/6ms 048 48 33.6 4.8 5520 417
Bounce time max., DC coil, form A/form B 4/10ms All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Contact ratings
Type Contact Load Cycles
IEC 61810
RT424 DC coil C (CO) 8A, 250VAC, cosφ=1, 85°C 10x103
RT444 AC coil A (NO) 8A, 250VAC, cosφ=1, 70°C 50x103
RT424 AC coil C (CO) 8A, 250VAC, cosφ=1, 70°C 30x103
UL 508
RT424 DC coil A/B (NO/NC) 10A, 250VAC, gen. purpose, 85°C 20x103
RT424 DC coil A/B (NO/NC) 1/2hp, 240VAC, 85°C 1x103
RT424 DC coil A/B (NO/NC) Pilot duty, B300, R300, 85°C 6x103
EN60947-5-1
RTE24 DC coil A/B (NO/NC) AC15, 250VAC, 3A 6.050
RTE24 DC coil A/B (NO/NC) DC13, 24VDC, 2A 6.050
RTE24 DC coil A/B (NO/NC) DC13, 250VDC, 0.2A 6.050
EN60730-1
RT424 DC coil A/B (NO/NC) 6(2)A, 250VAC, 85°C 100x103

Insulation Data
Mechanical endurance >30x106 operations Initial dielectric strength
between open contacts 1000Vrms
between contact and coil 5000Vrms
between adjacent contacts 2500Vrms
Clearance/creepage
between contact and coil ≥10/10mm
between adjacent contacts ≥ 3/4mm
Material group of insulation parts IIIa
Tracking index of relay base PTI 250V

1
04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications
© 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change.
a TE Connectivity Ltd. company http://relays.te.com/definitions
 General Purpose Relays
PCB Relays Potter & Brumfield

Power PCB Relay RT2 (Continued)

Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature -40 to 85°C
Category of environmental protection
IEC 61810 RTII - flux proof, RTIII - wash tight
Vibration resistance (functional),
form A/form B contact, 30 to 300Hz 20g/5g
Shock resistance (destructive) 100g
Terminal type PCB-THT, plug-in
Weight 13g
Resistance to soldering heat THT, IEC 60068-2-20
RTII 270°C/10s
RTIII 260°C/5s
Packaging/unit tube/20pcs., box/500pcs.

Accessories
For details see datasheet Accessories Industrial Power Relay RT
NOTE: indicated contact ratings and electrical endurance data for direct
wiring of relays (according IEC 61810-1); for relays mounted on sockets
deratings may apply.

Dimensions PCB layout / terminal assignment

Bottom view on solder pins

S0418-CA

S0272-BA

*) With the recommended PCB hole sizes a grid

pattern from 2.5​mm to 2.54​mm can be used.

2 form C (CO) contacts

S0163-BJ

2 form A (NO) contacts

S0163-BK

2
04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications
© 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change.
a TE Connectivity Ltd. company http://relays.te.com/definitions
 General Purpose Relays
PCB Relays Potter & Brumfield

Power PCB Relay RT2 (Continued)

Product code structure Typical product code RT 4 2 4 024 F

Type
RT Power PCB Relay RT2
Version
4 8A, pinning 5mm, flux proof
E 8A, pinning 5mm, wash tight
Contact arrangement
2 2 form C (CO) contacts
4 2 form A (NO) contacts
Contact material
4 AgNi 90/10
Coil
Coil code: please refer to coil versions table
Version
F Standard version

Product code Version Contacts Contact material Coil Part number

RT424005F 8A, 2 form C (CO) AgNi 90/10 5VDC 1-1419108-6
RT424012F pinning 5mm, contacts 12VDC 2-1393237-8
RT424024F flux proof 24VDC 1-1419108-7
RT444012F 2 form A (NO) 12VDC 1-1419108-9
RT444024F contacts 24VDC 2-1419108-0
RTE24005F 8A, 2 form C (CO) 5VDC 4-1419108-0
RTE24006F pinning 5mm, contacts 6VDC 6-1393227-5
RTE24009F wash tight 9VDC 3-1393237-0
RTE24012F 12VDC 3-1393237-1
RTE24024F 24VDC 3-1393237-3
RTE24048F 48VDC 3-1393237-4
RTE44012F 2 form A (NO) 12VDC 4-1419108-2
RTE44024F contacts 24VDC 3-1393237-5
This list represents the most common types and does not show all variants covered by this datasheet.
Other types on request

3
04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications
© 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change.
a TE Connectivity Ltd. company http://relays.te.com/definitions