English

1.12.2008

ASSEMBLY INSTRUCTION FOR CRANE

QQSMD24M90P676096
-

-
08204
-
J26492-0.ORD
 R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319

 Read the instructions supplied with the product before installation and commissioning.

 Keep the instructions in a safe place for future reference.

Table of content

6.2 Crane limit switch assembly ..................... 10

1 Crane components ....................................... 3 7 Bridge panel assembly ............................... 11
1.1 Double girder crane (Wire rope hoist) ........ 3 7.1 Double girder crane (Wire rope hoist) ...... 11
2 Festoon assembly ........................................ 4 8 Joint plate assembly .................................. 12
2.1 Double girder crane (Wire rope hoist) ........ 4 8.1 Joint plate assembly, top running end
3 Traveling machinery assembly.................... 6 carriages ........................................................... 13
3.1 Machinery sizes 3-5 ................................... 6 9 Cable plugs and paths ............................... 14
4 Crane towing arm assembly ........................ 7 9.1 Double girder crane plug layout and cable
4.1 Crane Towing Arm ..................................... 7 paths (Wire rope hoist) ...................................... 14
5 Hoist power towing arm assembly .............. 8 9.2 Plug diagram, (Wire rope hoist)................ 15
5.1 Double girder trolley (Wire rope hoist) ........ 8 10 Crane cable ways ....................................... 16
6 Traveling limit switch assembly .................. 9 10.1 Assembly examples ................................. 16
6.1 Double girder trolley (Wire rope hoist) ........ 9 10.2 Common assembly methods .................... 18

2/19
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
 R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319

1 4

2
3
6

7
13

12
14

9 8
11
c-osat-2-gb
10

Pos. Name Pos. Name

1 Festoon assembly 8 Horn (option)
2 Main girders 9 Bridge panel
3 Pendant (option) 10 Flashing light (option)
4 Hoist power towing arm 11 Crane power towing arm
5 Hoist 12 Load display (option)
6 End carriage 13 Bridge traveling machinery
7 Light (option) 14 Radio (option)

3/19
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
 R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319

Pos. Name Specification Amount

1 End stop KC-023215
2 Limit switch trigger QA-L210W30 and KC-023201
3 Track joint KC-024105 or KC-023210
4 Bracket for support arm KC-020286
5 Pendant trolley (option)
6 Track support bracket KC-023226 or KC-024122
7 Cable trolley
8 Towing arm assembly

4/19
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
 R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319

Part number eight (8) is an assembly, which includes a current collector, a cable saddle, two pieces
of fixing plates, a chain and a plate for a cable trolley.
Part number 4 is not included in standard delivery
To notice when assembling a festoon
Make sure that the joint (part no. 3) is smooth for trolley (part no. 7) to travel.
Pendant trolley will be assembled in the inner c-rail from the crane.
Tighten strain relief wires on both sides of the plug so that the pendant cable is either on loop or on
pleat. When looped, there will be better possibilities on adjusting the cable length.
Tighten the wire clamp.

5/19
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
 R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319

Pos. Name Specification Amount

1 End carriage 2
2 Washer DIN125-A8-A3G (Machinery sizes 3 and 4) 8+8
DIN6796-A12-A3G (Machinery size 5)
3 Screw DIN912-M8x85-8.8-A3G (Machinery size 3) 8+8
DIN912-M8x100-8.8-A3G (Machinery size 4)
DIN912-M12x140-8.8-A3G (Machinery size 5)
4 Traveling machinery 2

Clean splines and mounting flanges from dirt and rust protection wax and grease the shaft lightly
before assembly.
You can use a plastic hammer to slide drive in. Do not use any metal or lead hammer.
Tightening torques M8-8.8 23 Nm, M12-8.8 77 Nm.
Remove the protection pin from the breather plug.

6/19
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
 R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319

13 11 7 8 12 14

6 5
4
1

10

3
9
2

15

c-vr-lb

Pos. Name Specification Fixing variation Amount

1 Towing arm CQW-L558 A&B 1
2 Towing arm CQP-L195W120H135 A&B 1
3 Tube CQ-L1500W50H50T2 A&B 1
4 Fixing Plate CQP-L80W80H6 A&B 4
5 Fixing Plate (option) CQP-L150W105H6 B 1
6 C-Profile (option) CQP-L500W50H120 B 1
7 Screw DIN933-M10x20-8.8-A3G A&B 4
8 Screw DIN933-M10x35-8.8-A3G B 4
9 Screw DIN931-M8x80-8.8-A3G A&B 4
10 Screw DIN931-M8x140-8.8-A3G A&B 4
11 Washer DIN125-A10-A3G A/B 4 / 12
12 Washer DIN125-A8-A3G A&B 16
13 Nut DIN985-M10-8-A3G B 4
14 Nut DIN985-M8-8-A3G A&B 8
*
15 Towing arm (option) CQP-L440W41H80 A&B 1

A) Fixing variation with direct connection to end carriage. When conductor rail power supply type is used either part number 2 or its
fixing parts won’t be needed. It will not matter to the place of the end carriage where the towing arm is attached if the power supply
is flat cable- or the conductor rail type. The cranes towing arm is fixed by the part number 7 to the end carriage.
B) Variation with the optional fixing part (part number 6).
If necessary cut off excess length of square tubes.
There will be several attaching possibilities in the end carriage for the towing arm. Choose the best
suited for the case.
Notice the differences between variations in the part list.
*
For assembly use either Towing arm part no 2 or 15 (alternative parts).

7/19
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
 R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319

Pos. Name Specification Amount

1 Washer DIN127-A10-A3G 4
2 Screw DIN933-M10x30-8.8-A3G 4
3 Towing arm CQT-L 1
4 Tube CQ-L550W50H50T2 1
5 Fixing plate CQP-L80W80H6 4
6 Nut DIN985-M8-8-A3G 8
7 Towing arm assembly CQT-D/L/N 1
8 Screw DIN931-M8x80-8.8-A3G 4
9 Washer DIN125-A8-A3G 16
10 Screw DIN931-M8X140-8.8-A3G 4

8/19
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
 R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319

Limit switch part list

Pos. Name Specification Amount
Limit switch XC... 1
Fixing plate QA-L162W110H93 1
Fixing plate CQP-L80W80H6 1
Fixing part set CQA 1
Limit switch trigger part list
Pos. Name Specification Amount
Trigger QA-L210W30 2 or 4
Adapter KC-020275-0250 2 or 4
Trigger fixing part
Pos. Name Specification Amount
Track support bracket KC-023222 or KC-024155 2 or 4

Hoist limit switch can be assembled to the horizontal or to the vertical square tube of hoist towing arm.
Choose the best fitting place.

Notice the direction of limit switch; above or under the fixing plate.

9/19
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
 R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319

Limit switch part list

Pos. Name Specification Amount
A Limit switch XC... 1
Fixing plate CQK-W146H116T6 1
Fixing plate CQP-L80W80H6 4
Trigger fixing part
Pos. Name Specification Amount
B Trigger CQK-L463W80H145T5 or CQK-W463H140T5 2 or 4
Beam clip KC-020180-08 2 or 4
Fixing set
Pos. Name Specification Amount
A+B Limit switch assembly set L109 1

Assemble the crane limit switch to cranes towing arm. The trigger is to be assembled to the runway
beam.

10/19
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
 R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319

4 5

3 4 5
Note!
Positions 4 and
5 are alternative
fixing types.

Name Specification Amount

Fixing bridge panel; Position 1
Fixing plate CQP-L81W50H58T8 4/6/8
Screw (Thread locking) DIN913-M8x20-8.8-A3G 4/6/8
Washer DIN9021-8-A3G 4/6/8
Nut DIN985-M8-8-A3G 4/6/8
Fixing c-rail; Position 2
C-rail KC-020276 2
Nut; Square CQ-W25T6L45 10/12/14
Screw DIN933-M8x25-8.8-A3G 8/10/12
Screw DIN933-M8X70-8.8-A3G 2
Washer DIN125-A8-A3G 8/10/12
Washer QA-D9D36D5 4
Track support KC-024122 2
Fixing angle bars Position 3 4/5
Fixing plate QA-L90W40H45T10 2 2 2
Screw DIN933-M8X45-8.8-A3G 2 2 4
Screw DIN933-M8X50-8.8-A3G - 2 -
Screw DIN912-M8X25-8.8-A3G 4 2 4
Washer DIN125-A8-A3G 12 12 16
Nut DIN985-M8-8-A3G 6 6 8

Note! Amounts are case-specific. They vary by number and type of bridge panel(s) and amount of
vertical c-rails required.

11/19
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
 R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319

12/19
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
 R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319

Pos. Connection Friction rings

EB Side connection No
C, C-Gantry Top connection No
P, L, K Top connection Yes
R, S Top connection / Side connection Top yes, side no

Tightening torque
Screw size Tightening torque
M16-10.9 280 Nm
M20-8.8 385 Nm
M20-10.9 550 Nm

Check that joint surfaces are free from dirt, dust and loose particles. Only shop primer paint is
allowed.
Place friction rings around screw holes at top of end carriage.
Reset spring pins into the holes at joint plates so that pin head penetrates the plate about 10-20 mm
below bottom surface.
Place joint plate above the end carriage. Make sure, that spring pins contact with corresponding
holes at the end carriage top plate. Drive pins trough both plates with a hammer and proper tool.
Make sure, that friction rings are kept in position during assembly.
Assemble screws and nuts.
Assemble joint plate into final position and tighten screws with correct torque.
Retighten screws after test runs at assembly site.

13/19
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
 R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319

A/B Alternative cable paths

14/19
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
 R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319

E0

01
X012.

X012
E1
X251 X211 X221 X521 X31A1 X32A1
X251. X211. X221. X521. X31A1. X32A1.

25 21 22

X212. X222.
52 31A 32A

X212 X222
H-S1 H-M1 H-M2 X511. X31A2. X32A2.

X511 X31A2 X32A2

E3 E2A

51 41E 42E 45E

X41E2. X42E2.

X41E2 X42E2
E3 E-M1 E-M2 E-S2

v s -p-l-qaqc

Symbol Definition Symbol Definition

E0 Crane power supply E3 Push Button trolley and push button
E1 Bridge panel E2A Hoist panel
H-S1 Crane limit switch E-M1 Hoist traveling motor 1
H-M1 Crane traveling motor 1 E-M2 Hoist traveling motor 2
H-M2 Crane traveling motor 2 E-S2 Hoist limit switch

15/19
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
 R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319

A. Primary cable channel mounting location

B. Additional cable way if needed
C. Alternative cable channel mounting location
120. Cable way width 120 mm
220. Cable way width 220 mm

16/19
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
 R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319

A. Primary cable channel mounting location

C. Alternative cable channel mounting location
1. Similar cable way (width 75) for the other travelling unit also on the other end.
2. Use cover plates (not shown here) with cable ways along end carriages.
75. Cable way width 75 mm
120. Cable way width 120 mm
220. Cable way width 220 mm

B. Service platform

In the case of service platform there is a possibility to assemble cables of lights, limit switches, travelling
machineries etc in a cable way that situates between main girder and service platform. This cable way
do not include in standard delivery. This has to be ordered separately.

17/19
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
 R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319

Cable ways as an angle Cable fasteners for single or few cables Assembly on top
A. Plastic cable tie

Cable ways as an angle Cover assembly Wall assembly in an angle

4pcs. (15) per cover plate

Fastening to a C-rail Wall mounting

18/19
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
 R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319

End fastening onto a wall Joint

Spacing for brackets 3 and 4 is appr. 500 mm.

Fastening with M8x16 screw & washer
Assembly drillings M8

Pos. Name Specification

1 Cable way DEFEM 11 49_ 10
2 Cable way DEFEM 11 49_ 01
3 Bracket DEFEM 11 49_ 57
4 Bracket DEFEM 11 49_ 98
5 Fitting DEFEM 11 49_54
6 Fitting DEFEM 11 49_55
7 Fitting DEFEM 11 49_56
8 Fitting DEFEM 11 49_69
9 Screw set DEFEM 11 49_84
10 Cable fastener CADDY 4H24CT
11 Cable fastener CADDY 4H58CT
12 Cable fastener CADDY 4H91CT
13 Cover plate DEFEM 11 49_70
14 Cover plate DEFEM 11 49_71
15 Clip DEFEM 11 49_79
16 Fixing part CQ-W25T6L45
17 Washer DIN125-A8-A3G
18 Screw DIN912-M8x20-8.8-A3G

19/19
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.