Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Aluminum Electrolytic Capacitors/ M Radial Lead Type: Features

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

Aluminum Electrolytic Capacitors/ M

Radial Lead Type


Series: M Type: A
■ Features
● Endurance : 85 °C 2000 h
● Smaller than series SU
● RoHS directive compliant

■ Specifications
Category Temp. Range –40 °C to + 85 °C –25 °C to +85 °C
Rated W.V. Range 6.3 V.DC to 100 V.DC 160 V.DC to 450 V.DC
Nominal Cap. Range 2.2 μF to 22000 μF 1 μF to 470 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA) After 2 minutes
DC Leakage Current I < 0.06 CV +10 (μA) After 2 minutes
(Whichever is greater)
tan d Please see the attached standard products list
After applying rated working voltage for 2000 hours at +85°C±2 °C, when the capacitors are
restored to 20 °C, capacitors shall meet the following limits.
Endurance Capacitance change ±20 % of initial measured value
tan d <150 % of initial specified value
DC leakage current <initial specified value
After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized
Shelf Life
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)

■ Frequency correction factor for ripple current


Frequency (Hz)
50, 60 120 1k 10 k to
Correction factor 0.70 1.00 1.30 1.70

■ Dimensions in mm (not to scale) (Unit : mm)


fd±0.05

Sleeve
 08 010
Pressure relief
06.3 +

F±0.5

L= 14 min. 3 min. 0D+0.5 0D+0.5


=L16 : L±1.0
L20 : L±2.0

Body Dia. 0D 5 6.3 8 10 12.5 16 18


Lead Dia. 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2015

– EEE-111 –
Aluminum Electrolytic Capacitors/ M

■ Standard Products Endurance : 85 °C 2000 h


Case size Specification Lead Length Min. Packaging Q'ty
Cap. Ripple tan d Lead Lead Space
W.V. Current Dia. Straight
(±20 %) Dia. Length Taping Taping Part No. Taping
(120 Hz) (120 Hz) Straight Leads
(+85 °C) (+20 °C) ✽B ✽i
(V) (μF) (mm) (mm) (mA r.m.s.) (mm) (mm) (mm) (mm) (pcs) (pcs)
220 5 11 240 0.28 0.5 2.0 5.0 2.5 ECA0JM221( ) 200 2000
470 6.3 11.2 380 0.28 0.5 2.5 5.0 2.5 ECA0JM471( ) 200 2000
1000 8 11.5 580 0.28 0.6 3.5 5.0 ECA0JM102( ) 200 1000
2200 10 16 890 0.30 0.6 5.0 5.0 ECA0JM222( ) 200 500
3300 10 20 1020 0.32 0.6 5.0 5.0 ECA0JM332( ) 200 500
6.3
4700 12.5 20 1170 0.34 0.6 5.0 5.0 ECA0JM472( ) 200 500
6800 12.5 25 1270 0.38 0.6 5.0 5.0 ECA0JM682( ) 200 500
10000 16 25 1450 0.46 0.8 7.5 7.5 ECA0JM103( ) 100 250
15000 16 31.5 1700 0.56 0.8 7.5 ECA0JM153 100
22000 18 35.5 1900 0.70 0.8 7.5 ECA0JM223 50
330 6.3 11.2 330 0.24 0.5 2.5 5.0 2.5 ECA1AM331( ) 200 2000
1000 10 12.5 630 0.24 0.6 5.0 5.0 ECA1AM102( ) 200 500
2200 10 20 920 0.26 0.6 5.0 5.0 ECA1AM222( ) 200 500
3300 12.5 20 1090 0.28 0.6 5.0 5.0 ECA1AM332( ) 200 500
10
4700 12.5 25 1200 0.30 0.6 5.0 5.0 ECA1AM472( ) 200 500
6800 16 25 1400 0.34 0.8 7.5 7.5 ECA1AM682( ) 100 250
10000 16 31.5 1600 0.42 0.8 7.5 ECA1AM103 100
15000 18 35.5 1850 0.52 0.8 7.5 ECA1AM153 50
10 5 11 30 0.20 0.5 2.0 5.0 2.5 ECA1CM100( ) 200 2000
22 5 11 75 0.20 0.5 2.0 5.0 2.5 ECA1CM220( ) 200 2000
33 5 11 110 0.20 0.5 2.0 5.0 2.5 ECA1CM330( ) 200 2000
47 5 11 130 0.20 0.5 2.0 5.0 2.5 ECA1CM470( ) 200 2000
100 5 11 180 0.20 0.5 2.0 5.0 2.5 ECA1CM101( ) 200 2000
220 6.3 11.2 280 0.20 0.5 2.5 5.0 2.5 ECA1CM221( ) 200 2000
16 470 8 11.5 440 0.20 0.6 3.5 5.0 ECA1CM471( ) 200 1000
1000 10 16 680 0.20 0.6 5.0 5.0 ECA1CM102( ) 200 500
2200 12.5 20 1000 0.22 0.6 5.0 5.0 ECA1CM222( ) 200 500
3300 12.5 25 1200 0.24 0.6 5.0 5.0 ECA1CM332( ) 200 500
4700 16 25 1360 0.26 0.8 7.5 7.5 ECA1CM472( ) 100 250
6800 16 31.5 1600 0.30 0.8 7.5 ECA1CM682 100
10000 18 35.5 1800 0.38 0.8 7.5 ECA1CM103 50
100 6.3 11.2 180 0.16 0.5 2.5 5.0 2.5 ECA1EM101( ) 200 2000
330 8 11.5 390 0.16 0.6 3.5 5.0 ECA1EM331( ) 200 1000
470 10 12.5 480 0.16 0.6 5.0 5.0 ECA1EM471( ) 200 500
1000 10 20 850 0.16 0.6 5.0 5.0 ECA1EM102( ) 200 500
25
2200 12.5 25 1200 0.18 0.6 5.0 5.0 ECA1EM222( ) 200 500
3300 16 25 1300 0.20 0.8 7.5 7.5 ECA1EM332( ) 100 250
4700 16 31.5 1500 0.22 0.8 7.5 ECA1EM472 100
6800 18 35.5 1750 0.26 0.8 7.5 ECA1EM682 50
47 5 11 130 0.14 0.5 2.0 5.0 2.5 ECA1VM470( ) 200 2000
35 100 6.3 11.2 210 0.14 0.5 2.5 5.0 2.5 ECA1VM101( ) 200 2000
220 8 11.5 350 0.14 0.6 3.5 5.0 ECA1VM221( ) 200 1000
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2015

– EEE-112 –
Aluminum Electrolytic Capacitors/ M

■ Standard Products Endurance : 85 °C 2000 h


Case size Specification Lead Length Min. Packaging Q'ty
Cap. Ripple tan d Lead Lead Space
W.V. Current Dia. Straight
(±20 %) Dia. Length Taping Taping Part No. Taping
(120 Hz) (120 Hz) Straight Leads
(+85 °C) (+20 °C) ✽B ✽i
(V) (μF) (mm) (mm) (mA r.m.s.) (mm) (mm) (mm) (mm) (pcs) (pcs)
330 10 12.5 440 0.14 0.6 5.0 5.0 ECA1VM331( ) 200 500
470 10 16 550 0.14 0.6 5.0 5.0 ECA1VM471( ) 200 500
1000 12.5 20 900 0.14 0.6 5.0 5.0 ECA1VM102( ) 200 500
35
2200 16 25 1250 0.16 0.8 7.5 7.5 ECA1VM222( ) 100 250
3300 16 31.5 1400 0.18 0.8 7.5 ECA1VM332 100
4700 18 35.5 1600 0.20 0.8 7.5 ECA1VM472 50
2.2 5 11 20 0.12 0.5 2.0 5.0 2.5 ECA1HM2R2( ) 200 2000
3.3 5 11 35 0.12 0.5 2.0 5.0 2.5 ECA1HM3R3( ) 200 2000
4.7 5 11 45 0.12 0.5 2.0 5.0 2.5 ECA1HM4R7( ) 200 2000
10 5 11 65 0.12 0.5 2.0 5.0 2.5 ECA1HM100( ) 200 2000
22 5 11 100 0.12 0.5 2.0 5.0 2.5 ECA1HM220( ) 200 2000
33 5 11 110 0.12 0.5 2.0 5.0 2.5 ECA1HM330( ) 200 2000
47 6.3 11.2 130 0.12 0.5 2.5 5.0 2.5 ECA1HM470( ) 200 2000
50
100 8 11.5 250 0.12 0.6 3.5 5.0 ECA1HM101( ) 200 1000
220 10 12.5 400 0.12 0.6 5.0 5.0 ECA1HM221( ) 200 500
330 10 16 500 0.12 0.6 5.0 5.0 ECA1HM331( ) 200 500
470 10 20 650 0.12 0.6 5.0 5.0 ECA1HM471( ) 200 500
1000 12.5 25 1050 0.12 0.6 5.0 5.0 ECA1HM102( ) 200 500
2200 16 31.5 1300 0.14 0.8 7.5 ECA1HM222 100
3300 18 35.5 1500 0.16 0.8 7.5 ECA1HM332 50
10 5 11 70 0.11 0.5 2.0 5.0 2.5 ECA1JM100( ) 200 2000
22 5 11 105 0.11 0.5 2.0 5.0 2.5 ECA1JM220( ) 200 2000
33 6.3 11.2 130 0.11 0.5 2.5 5.0 2.5 ECA1JM330( ) 200 2000
47 6.3 11.2 160 0.11 0.5 2.5 5.0 2.5 ECA1JM470( ) 200 2000
100 8 11.5 270 0.11 0.6 3.5 5.0 ECA1JM101( ) 200 1000
63
220 10 16 450 0.11 0.6 5.0 5.0 ECA1JM221( ) 200 500
330 10 20 550 0.11 0.6 5.0 5.0 ECA1JM331( ) 200 500
470 12.5 20 750 0.11 0.6 5.0 5.0 ECA1JM471( ) 200 500
1000 16 25 1100 0.11 0.8 7.5 7.5 ECA1JM102( ) 100 250
2200 18 35.5 1400 0.13 0.8 7.5 ECA1JM222 50
2.2 5 11 30 0.10 0.5 2.0 5.0 2.5 ECA2AM2R2( ) 200 2000
3.3 5 11 40 0.10 0.5 2.0 5.0 2.5 ECA2AM3R3( ) 200 2000
100 4.7 5 11 50 0.10 0.5 2.0 5.0 2.5 ECA2AM4R7( ) 200 2000
10 5 11 70 0.10 0.5 2.0 5.0 2.5 ECA2AM100( ) 200 2000
22 6.3 11.2 115 0.10 0.5 2.5 5.0 2.5 ECA2AM220( ) 200 2000
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2015

– EEE-113 –
Aluminum Electrolytic Capacitors/ M

■ Standard Products Endurance : 85 °C 2000 h


Case size Specification Lead Length Min. Packaging Q'ty
Cap. Ripple tan d Lead Lead Space
W.V. Current Dia. Straight
(±20 %) Dia. Length Taping Taping Part No. Taping
(120 Hz) (120 Hz) Straight Leads
(+85 °C) (+20 °C) ✽B ✽i
(V) (μF) (mm) (mm) (mA r.m.s.) (mm) (mm) (mm) (mm) (pcs) (pcs)
33 8 11.5 145 0.10 0.6 3.5 5.0 ECA2AM330( ) 200 1000
47 8 11.5 180 0.10 0.6 3.5 5.0 ECA2AM470( ) 200 1000
100 10 16 350 0.10 0.6 5.0 5.0 ECA2AM101( ) 200 500
100 220 12.5 20 550 0.10 0.6 5.0 5.0 ECA2AM221( ) 200 500
330 12.5 25 700 0.10 0.6 5.0 5.0 ECA2AM331( ) 200 500
470 16 25 900 0.10 0.8 7.5 7.5 ECA2AM471( ) 100 250
1000 18 35.5 1300 0.10 0.8 7.5 ECA2AM102 50
1 6.3 11.2 36 0.16 0.5 2.5 5.0 2.5 ECA2CM010( ) 200 2000
2.2 6.3 11.2 53 0.16 0.5 2.5 5.0 2.5 ECA2CM2R2( ) 200 2000
3.3 6.3 11.2 66 0.16 0.5 2.5 5.0 2.5 ECA2CM3R3( ) 200 2000
4.7 6.3 11.2 78 0.16 0.5 2.5 5.0 2.5 ECA2CM4R7( ) 200 2000
10 10 12.5 105 0.16 0.6 5.0 5.0 ECA2CM100( ) 200 500
22 10 16 175 0.16 0.6 5.0 5.0 ECA2CM220( ) 200 500
160
33 10 20 235 0.16 0.6 5.0 5.0 ECA2CM330( ) 200 500
47 12.5 20 320 0.16 0.6 5.0 5.0 ECA2CM470( ) 200 500
100 12.5 25 515 0.16 0.6 5.0 5.0 ECA2CM101( ) 200 500
220 16 31.5 830 0.16 0.8 7.5 ECA2CM221 100
330 18 31.5 1090 0.16 0.8 7.5 ECA2CM331 50
470 18 40 1440 0.16 0.8 7.5 ECA2CM471 50
1 6.3 11.2 34 0.18 0.5 2.5 5.0 2.5 ECA2DM010( ) 200 2000
2.2 6.3 11.2 50 0.18 0.5 2.5 5.0 2.5 ECA2DM2R2( ) 200 2000
3.3 6.3 11.2 62 0.18 0.5 2.5 5.0 2.5 ECA2DM3R3( ) 200 2000
4.7 8 11.5 86 0.18 0.6 3.5 5.0 ECA2DM4R7( ) 200 1000
10 10 12.5 100 0.18 0.6 5.0 5.0 ECA2DM100( ) 200 500
200 22 10 20 180 0.18 0.6 5.0 5.0 ECA2DM220( ) 200 500
33 10 20 220 0.18 0.6 5.0 5.0 ECA2DM330( ) 200 500
47 12.5 20 300 0.18 0.6 5.0 5.0 ECA2DM470( ) 200 500
100 16 25 475 0.18 0.8 7.5 7.5 ECA2DM101( ) 100 250
220 18 31.5 835 0.18 0.8 7.5 ECA2DM221 50
330 18 40 1140 0.18 0.8 7.5 ECA2DM331 50
1 6.3 11.2 34 0.18 0.5 2.5 5.0 2.5 ECA2EM010( ) 200 2000
2.2 6.3 11.2 50 0.18 0.5 2.5 5.0 2.5 ECA2EM2R2( ) 200 2000
3.3 8 11.5 72 0.18 0.6 3.5 5.0 ECA2EM3R3( ) 200 1000
4.7 8 11.5 86 0.18 0.6 3.5 5.0 ECA2EM4R7( ) 200 1000
10 10 16 110 0.18 0.6 5.0 5.0 ECA2EM100( ) 200 500
250
22 10 20 180 0.18 0.6 5.0 5.0 ECA2EM220( ) 200 500
33 12.5 20 250 0.18 0.6 5.0 5.0 ECA2EM330( ) 200 500
47 12.5 25 330 0.18 0.6 5.0 5.0 ECA2EM470( ) 200 500
100 16 31.5 530 0.18 0.8 7.5 ECA2EM101 100
220 18 40 930 0.18 0.8 7.5 ECA2EM221 50
1 6.3 11.2 32 0.20 0.5 2.5 5.0 2.5 ECA2VM010( ) 200 2000
350
2.2 8 11.5 55 0.20 0.6 3.5 5.0 ECA2VM2R2( ) 200 1000
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2015

– EEE-114 –
Aluminum Electrolytic Capacitors/ M

■ Standard Products Endurance : 85 °C 2000 h


Case size Specification Lead Length Min. Packaging Q'ty
Cap. Ripple tan d Lead Lead Space
W.V. Current Dia. Straight
(±20 %) Dia. Length Taping Taping Part No. Taping
(120 Hz) (120 Hz) Straight Leads
(+85 °C) (+20 °C) ✽B ✽i
(V) (μF) (mm) (mm) (mA r.m.s.) (mm) (mm) (mm) (mm) (pcs) (pcs)
3.3 8 11.5 60 0.20 0.6 3.5 5.0 ECA2VM3R3( ) 200 1000
4.7 10 12.5 65 0.20 0.6 5.0 5.0 ECA2VM4R7( ) 200 500
10 10 20 115 0.20 0.6 5.0 5.0 ECA2VM100( ) 200 500
350 22 12.5 20 195 0.20 0.6 5.0 5.0 ECA2VM220( ) 200 500
33 16 25 300 0.20 0.8 7.5 7.5 ECA2VM330( ) 100 250
47 16 25 325 0.20 0.8 7.5 7.5 ECA2VM470( ) 100 250
100 18 31.5 535 0.20 0.8 7.5 ECA2VM101 50
1 6.3 11.2 32 0.20 0.5 2.5 5.0 2.5 ECA2GM010( ) 200 2000
2.2 8 11.5 50 0.20 0.6 3.5 5.0 ECA2GM2R2( ) 200 1000
3.3 10 12.5 54 0.20 0.6 5.0 5.0 ECA2GM3R3( ) 200 500
4.7 10 16 72 0.20 0.6 5.0 5.0 ECA2GM4R7( ) 200 500
400 10 10 20 115 0.20 0.6 5.0 5.0 ECA2GM100( ) 200 500
22 12.5 25 215 0.20 0.6 5.0 5.0 ECA2GM220( ) 200 500
33 16 25 275 0.20 0.8 7.5 7.5 ECA2GM330( ) 100 250
47 16 31.5 350 0.20 0.8 7.5 ECA2GM470 100
100 18 40 600 0.20 0.8 7.5 ECA2GM101 50
1 8 11.5 37 0.20 0.6 3.5 5.0 ECA2WM010( ) 200 1000
2.2 10 12.5 44 0.20 0.6 5.0 5.0 ECA2WM2R2( ) 200 500
3.3 10 16 60 0.20 0.6 5.0 5.0 ECA2WM3R3( ) 200 500
450 4.7 10 20 79 0.20 0.6 5.0 5.0 ECA2WM4R7( ) 200 500
10 12.5 20 130 0.20 0.6 5.0 5.0 ECA2WM100( ) 200 500
22 16 25 210 0.20 0.8 7.5 7.5 ECA2WM220( ) 100 250
33 16 31.5 285 0.20 0.8 7.5 ECA2WM330 100
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2015

– EEE-115 –

You might also like