MÀTIX

CATALOGUE
2018
COMPACT
 Index
3-21
Catalogue Basic control devices 4
Blanking modules 7
TV sockets 7
TV accessories, special sockets 8
Italian standard sockets 8
German/Italian standard sockets 9
Different standard sockets 10
RJ and optic connectors 11
Audio video connectors 12
Electronic control 12
Temperature control 14
Audible and optical signalling devices 15
Emergency lamps 16
Safety devices 17
Backlighting Led 17
Gas detectors 18
Accessories 18
Hotel offer range 19
Antimicrobial and antiremoval plates 20

22-34
Cover plates: colours Area Italian installation system 22
and installations Special cover plates 25
IDROBOX - IDROBOX PLUS 26
Installation solution for the service sector 29
INTERLINK installation solutions 30

MÀTIX CATALOGUE 3
 BASIC CONTROL DEVICES
A5007
A5007C
A5007D
A5007DC
AM5001 AM5001L AM5011 AM5051N A5011/32 AM5001/2 AM5003ES
AM5003 AM5003L AM5055N AM5003/2
AM5053N

Item ONE-WAY SWITCHES Item TWO-WAY SWITCHES

AM5001 1P 16 AX - 250 Va.c. - lightable with led lamp AM5003/2 1P 16 AX - 250Va.c. - 2 modules - lightable with led
A5001 LN4742V230 - LN4742V127 - LN4742V12 A5003/2 lamp LN4742V230 - LN4742V127 - LN4742V12

AM5001A as above - with AUTOMATIC CLAMPS AM5003M2A as above - with AUTOMATIC CLAMPS

AM5001L 1P 16 AX - 250 Va.c. - lightable with led lamp 1P 16 AX – 250 Va.c. with key - the key can be taken
AM5007D
LN4742V230 - LN4742V127 - LN4742V12 - device A5007D out even in the off position - the keys are different
with backlight clearly visible even in daylight
and in well-it AM5007DC* 1P 16 AX - 250 V a.c. with key - as above - the key
AM5001AL as above - with AUTOMATIC CLAMPS A5007DC* are the same

* Items managed on demand. To order consult the BTicino sales staff

AM5001/2 1P 16 AX - 250 Va.c. - 2 modules - lightable with
A5001/2 led lamp LN4742V230 - LN4742V127 - LN4742V12 TWO-WAY ENERGY SAVING SWITCH
AM5003ES Two-way Energy Saving switch with presence
AM5001M2A as above - with AUTOMATIC CLAMPS detector. It works as a traditional 2 way switch
(manual ON, manual OFF) but it will automatically
turn off the light if it doesn’t detect any presence
AM5011 2P 16 AX - 250 Va.c. for 10 minutes. IR detection range, 8 meters, 160°
A5011 - it is suitable with all type of loads that can be
mixed on the same line:
AM5011L* 2P 16 AX - 250 Va.c. - 12-150 W: halogen or resistive loads
lightable - 2-150 VA: lamps with electronic or ferromagnetic
ballast
AM5011/32 2P 32 A - 250 Va.c. - 8-30 W (or 650 mA): LEDs or CFLs
A5011/32 Particularly suitable for places where a light can
stay switched on for a long time such as garage
AM5007 2P 16 AX - 250 Va.c. with key - the key can be and cellar, children’s room, etc.
A5007 taken ou even in the off position - the keys are No neutral wiring, 127-230 V, 2 modules.
different
AXIAL SWITCHES - SCREW & PLATE TERMINAL
AM5007C* 2P 16 AX - 250 Va.c. with key - as above - the key
AM5051N 1-way switch 1P 10 AX - 250 Va.c. - lightable with
A5007C* are the same
led lamp (see led page)
* Items managed on demand. To order consult the BTicino sales staff 2-way switch 1P 10 AX - 250 Va.c. - lightable with
AM5053N
led lamp (see led page)
TWO-WAY SWITCHES
AM5003 1P 16 AX - 250 Va.c. - lightable with led lamp AM5055N Pushbutton 1P NO 1P (NO) 10 A - 250 Va.c. - lightable
A5003 LN4742V230 - LN4742V127 - LN4742V12 with led lamp (see led page)
AM5003A as above - with AUTOMATIC CLAMPS

AM5003L 1P 16 AX – 250 Va.c. - lightable with led lamp ENERGY SAVING SWITCH
LN4742V230 - LN4742V127 - LN4742V12 - device
with backlight clearly visible even in daylight and
in well-it
AM5003AL as above - with AUTOMATIC CLAMPS NOTE:
Neutral NOT necessary.
Zero consumption
when the light is OFF

4
NOTE: White colour device Ivory colour device Neutral item
BASIC CONTROL DEVICES

AM5012 AM5012/2 AM5052/2 AM5315/34 5331/230

A5124 A5086 2124N A5315/34

INTERMEDIATE SWITCHES - CHANGEOVER

SWITCHES - PRESETTER - KNOB Item ELECTRONIC CYCLIC RELAY
AM5012 intermediate switch 16 AX - 250 Va.c. - lightable AM5315/34 cyclic relay 10AX 230 Va.c. 3-4 wires
A5012 with led lamp LN4742V230 - LN4742V127 - A5315/34
LN4742V12
AM5012/2 intermediate switch 16 AX - 250 Va.c. - 2 modules 5331/230 cyclic relay with two NO contact - two cams: 1st
A5012/2 lightable with led lamp LN4742V230 - LN4742V127 cam cycle: NO/NC/NC/NO 2nd cam cycle: NO/NC/
- LN4742V12 NC/NO - supply voltage: 230 Va.c. dis pg2
AM5052 changeover switch 1P 16 A – 250 Va.c. AUDIO POTENTIOMETER
Interruttore
A5052N AM5305 audio potentiometer 0-5W 47 Ohm
A5305 energetico
AM5052/2 changeover switch 1P 16 A – 250 Va.c. - 2 modules
A5052/2
N

AM5124 jack presetter with 2 contacts in closure - 10 A 48 V

A5124 (for plug item 2124N)
L L

2124N jack for items AM/A5124

AM5086 selector switch - rotary changeover switch 1P 3 A

A5086 - 250 Va.c. - 1 way - 4 positions to control air
conditioners, fans, etc. dis pg2
MONOSTABLE RELAYS
AM5332/230 monostable relay with NO/NC contact 250 Va.c. 10 Interruttore risparmio
A5332/230 A resistive 4 A inductive coil power supply 230 Va.c. energetico Deviatore +
risparmio en
AM5332/24 relay as above - power supply 24 Va.c. 2
N
1 L

AM5332/12 relay as above - power supply 12 Va.c. 1

L L

dis pg3

Two-way energy saving switch Two-way switch + 2 Two-way energy saving switches
Two-way energy saving switch

Deviatore + interruttore
risparmio energetico Interruttore
dis pg2 2
energetico +
1 L
Interruttore risparmio
energetico

The IR sensor is activated when the light is switched on from The IR sensor of the two switches are both activated when the
oneN of the two switches. The tw-way energy saving can be light is switched on. The light will switch off when one of the
installed both near or far from the load and it opens the circuit dis
twopg3
switches stays 10 minutes with no movement detection.
after 10 minutes with no movement 1 detection.

L
L
MÀTIX CATALOGUE 5
NOTE: White colour device Ivory colour device Neutral item 2
 BASIC CONTROL DEVICES

AM5005 AM5005L AM5055/2 AM5037 AM5005/2D AM5008

AM5005/1 AM5037/2

A5332/230 A5055 A5006 A5054 A5057R

PUSHBUTTONS Item PUSHBUTTONS

AM5005 1P (NO) 10 A – 250 Va.c. - lightable with led lamp AM5005/2A pushbutton 1P (NO) 10A – 250Va.c. “lamp symbol”
A5005N LN4742V230 - LN4742V127 - LN4742V12 A5005/2A - 2 modules

AM5005A as above - with AUTOMATIC CLAMPS AM5005M2AA as above - with AUTOMATIC CLAMPS

AM5005L 1P (NO) 10 A - 250 Va.c. - lightable with led lamp AM5005/2D pushbutton 1P (NO) 10A - 250Va.c. “bell symbol”
LN4742V230 - LN4742V127 - LN4742V12 - device with A5005/2D - 2 modules
backlight clearly visible even in daylight and in well-it
AM5005AL as above - with AUTOMATIC CLAMPS AM5005M2AD as above - with AUTOMATIC CLAMPS

AM5005/1 1P (NC) 10 A - 250 Va.c. AM5006 1P (NO) 10A – 250Va.c. with cord-pull
A5005/1N A5006N

AM5005/2 1P (NO) 10 A - 250 Va.c. - 2 modules - lightable with AM5054 2P (NO) 10A – 250 Va.c.
A5005/2 led lamp LN4742V230 - LN4742V127 - LN4742V12 A5054

AM5008 pushbutton 1P (NO) + lightable nameplate

AM5005M2A as above - with AUTOMATIC CLAMPS
A5008 with Led lamps LN4742V230T, LN4742V127T,
LN4742V12T
AM5057B P (NO) 10A – 250 Va.c. + lamp-holder for Led
AM5055 double 1P (NO) + 1P (NO) 10A - 250Va.c. A5057B lamps LN4742V230T, LN4742V127T, LN4742V12T
A5055 - transparent diffuser
AM5057R P (NO) 10A – 250 Va.c. + lamp-holder for Led
AM5055/2 double 1P (NO) + 1P (NO) 10 A - 250 Va.c. A5057R lamps LN4742V230T, LN4742V127T, LN4742V12T
A5055/2 - 2 modules - red diffuser
AM5057V 1P (NO) 10A – 250 Va.c. + lamp-holder for Led
AM5037 double 1P (NO) + 1P (NO) 10A - 250Va.c. interlocked A5057V lamps LN4742V230T, LN4742V127T, LN4742V12T
A5037 - green diffuser
AM5057A 1P (NO) 10A – 250 Va.c. + lamp-holder for Led
AM5037/2 double 1P (NO) + 1P (NO) 10A A5057A lamps LN4742V230T, LN4742V127T, LN4742V12T
A5037/2 - 250 Va.c. interlocked - orange diffuser
- 2 modules AM5007P* pushbutton 2P (NO) 10A – 250 Va.c. with key - the
key can be removed only in off position - keys are
different from each other.
* Each device has its own key lock, which is different from the locks of other
devices. If several devices with the same key lock are required, contact the
BTicino Sales Staff.

6
NOTE: White colour device Ivory colour device Neutral item
BLANKING MODULES TV SOCKETS

AM5000 AM5000P/2 AM5009 AM5009/2 A5921W AM5202D AM5202P14 AM5210M2D A5214D AM5202F
AM5202P10

Item BLANKING MODULES AND OUTPUTS Item TV SOCKETS

AM5000 blanking module key AM5202D Star coaxial socket for single-user aerial systems,
A5000 A5202D also remote powered and centralised, and single-
user / centralised satellite systems with current
AM5000P/2 blanking module key with knockout - 2 modules and signal transfer for channels selection; shielded
A5000P/2 connection clamps with captive screws - Ø 9.5 mm;
male connector - 1 module
AM5009 simple output ø 9.5 mm - 1 module AM5202P14 Passthrough coaxial socket, -14dB attenuation,
A5009 A5202P14 for centralised TV systems, also remote powered,
and centralised satellite systems with current and
AM5009/2 simple output ø 9.5 mm - 2 modules signal transfer for channels selection - shielded
A5009/2 connection clamps with captive screws - Ø 9.5 mm;
male connector - 1 module
BLANKING MODULE WITH LIGHTABLE SYMBOL AM5202P10 Terminal coaxial socket, -10dB attenuation, for
AM5921... complete the blanking module item code with the A5202P10 centralised TV systems, also remote powered,
A5921... symbol reference letter and centralised satellite systems with current and
AM5921/2... as above - 2 modules signal transfer for channels selection; shielded
connection clamps with captive screws - Ø 9,5 mm
- male connector - incorporated impedance final
AM5921W key with white tag adapter 75 Ω - 1 module
A5921W AM5202F Type-F coaxial socket - impedance 75 ohm - screw
A5202F hook - 1 module
NOTE: using as a substitute for 1-way switches 1P, 2 way switches 1P, intermediate
switches and pushbuttons 1P AM5214D Star demixed coaxial socket for single-user aerial
A5214D systems, also remote powered and shunting
centralised, and for single-user/shunting centralised
satellite systems with current and signal transfer for
channels selection; Ø 9.5 mm male TV connector -
type F SAT connector - 1 module
AM5210M2D Star demixed coaxial socket for single-user aerial
A5921... A5210M2D systems, also remote powered and shunting
centralised, and for single-user/shunting centralised
satellite systems with current and signal transfer
for channels selection, and for radio systems; O 9.5
mm male TV connector - type F SAT connector and
female radio Ø 9.5 mm - 2 modules
A4211M2C Double coaxial shunted socket for TV and FM- LMC
reception - Ø 9.5 mm - Belgium (Telenet operator)
A B C D E

TV JACKS FEMALE CONNECTOR

AM9152D shunted coax jack for single-user antenna systems,
F G H L M also remote supplied and centralised and systems
via single-user satellite and centralised with feed-
through and signal current to select channels
- shielded connection terminals with unlosable
N P Q R S T screws - Ø 9.5 mm - female connector - 1 module
AM9162P pass-through coax jack - as above, single-user
excluded Ø 9,5 mm - female connector - 1 module

MÀTIX CATALOGUE 7
NOTE: White colour device Ivory colour device Neutral item
 TV ACCESSORIES ITALIAN STANDARD SOCKETS
SPECIAL SOCKETS

AM5164/2 AM5285C AM5113 AM5100 AM5180 AM5180/2

A5020N A5120 75RTN A5180/3 A5022ET A5180R A5180V A5180A

Item TERMINAL RESISTANCE FOR TV JACKS Item ITALIAN STANDARD SOCKETS

75RTN terminal resistance to close 75Ω impedance AM5113 socket 2P+E 10 A 250 Va.c. - centre distance 19 mm
lines in collective antenna systems with cascade A5113 shielded holes Ø 4 mm
connection - to be added to the last feed-through
socket in each riser (terminal socket in feed- AM5180 socket 2P+E 10A and 16 A 250 Va.c. - centre distance
through systems) or at the output of the last A5180 19 mm und 26 mm shielded holes
distribution block (in shunted systems)
FRONT COVERS FOR TV JACKS A5180R* socket as above, red
AM5164/2 front cover for TV-R jacks
A5164/2
A5180A* socket as above, orange
AM5163/3 front cover for TV-R-SAT jacks
A5163/3
A5180V* socket as above, green
SPECIAL SOCKETS
AM5020 special polarised 2P socket irreversible max 24 Vd.c. safety socket 2P+E 10 A 250 Va.c. irreversible for
AM5100
A5020N - for plug 2020 A5100 plug item 2200NA or 2200NN
AM5120 mignon 2P socket - holes Ø 3 mm - centre distance * To order consult the BTicino sales staff.
A5120 13 m - for auxiliary circuits and similar 6A 24V SELV
- terminal connection ITALIAN STANDARD DUPLEX AND TRIPLEX
SOCKETS
USB CHARGER AM5180/2 duplex socket - 2 sockets in parallel 2P + E 10 A and
AM5285C1 5 Vdc USB charger to be used only for recharging A5180/2 16 A 250 Va.c. - centre distance 19 mm and 26 mm
A5285C1 electronic devices up to 1100 mA like mobile - 2P extra (phase-neutral) available for junctions
phones, smartphones, tablets and similar AM5180/3 triplex socket - 3 sockets in parallel 2P + E 10 A and
- 110-230 Va.c. 50÷60 Hz power supply A5180/3 16A 250 Va.c. - centre distance 19 mm and 26 mm
AM5285C2 5 Vdc USB charger for quick charge of one single - 2P extra (phase-neutral) available for junctions
A5285C2 electronic device (mobile phones, smartphones,
tablets or similar) up to 2400 mA or simultaneous
charging of two devices up to 1200 mA
- 110÷230 Va.c. 50÷60 Hz power supply

WIRING DIAGRAM TRIPLEX SOCKETS

N
L1 L1 L1 L1

L2L L2 L2L L2
L

LEGEND
● auxiliary terminals for small junctions ● patching for feed-through line

8
NOTE: White colour device Ivory colour device Neutral item
GERMAN/ITALIAN STANDARD SOCKETS

A5440/3 A5440/16 A5440X16A A5440X16V AM5440/2 A5440/2NR AM5440/2P

AM5451/2 A5451/2R AM5450/2

Item ITALIAN AND GERMAN STANDARD SOCKETS Item GERMAN STANDARD SOCKETS
AM5440/3 socket 2P+E 10/16A with side contacts and central AM5440/2 socket 2P+E 10/16A 250V -type earth side contacts
A5440/3 earthing-contact A5440/2N - shielded socket contacts

A5440/3R socket as above, red A5440/2NR* socket as above, red

AM5440/16 socket 2P+E 10A and 16A 250 Va.c. 19 mm and A5440X2A* socket as above, orange
A5440/16 26 mm center distance, 2-center socket configuration
protected socket contacts; earth side contacts for
German standard plugs; suitable for Italian standard A5440X2V* socket as above, green
plugs 2P and 2P+E 10/16A, German standard plugs
2P+E 16A
A5440/16R* socket as above, red AM5440MA socket 2P+E 10/16A 250V a.c. with automatic
A5440MA terminals - 2 modules with frame

A5440X16A* socket as above, orange AM5440/2P socket as above with cover

A5440X16V* socket as above, green * Items managed on demand. To order consult the BTicino staff
DUPLEX AND TRIPLEX GERMAN STANDARD
SOCKETS
* Items managed on demand. To order consult the BTicino staff AM5450/2 socket 2P+E 10/16 A - type earth side contacts -
DUPLEX ITALIAN AND GERMAN SOCKETS shielded socket contacts - in dual-centre configuration
AM5451/2 socket 2P+E 10 A and 16 A 250 Va.c. - centre
distance 19 mm and 26 mm in dual-centre A5450/2R socket as above, red
configuration - protected socket contacts; side
earth contacts for German standard plugs; suitable
AM5450/3 socket 2P+E 10/16 A - type earth side contacts - shielded
for: Italian standard plugs 2P and 2P+E 10A and
socket contacts - in triplex-centre configuration
16A, German standard plugs 2P+E16A - 2P extra
(phase-neutral) available for junctions A5450/3R socket as above, red
A5451/2R socket as above, red

MÀTIX CATALOGUE 9
NOTE: White colour device Ivory colour device Neutral item
 DIFFERENT STANDARD SOCKETS

AM5430A AM5025R AM5025T A5025T AM5150 AM5039 A5039

AM5025S

AM5115S AM5028TS AM5115D AM5115DR AM5183 A5183

Item FRENCH STANDARD SOCKETS Item BRITISH STANDARD SOCKETS

AM5430A socket 2P+E 10/16 A 250 Va.c. - shielded holes AM5150 socket 2P+T 13 A conform to BS1363
A5430A - 2 modules - with automatic terminals A5150

EURO-AMERICAN STANDARD SOCKETS ISRAELI STANDARD SOCKET

AM5025R socket 2P 16 A 127/250 Va.c. - shielded holes AM5183 socket 2P+E 10/16 A 250 Va.c.
A5025R A5183 - lightable with LED lamp item 11256

AM5025S socket 2P 16 A 127/250 Va.c. - unshielded holes AM5183/RED socket as above, red
AM5025SM

AM5025T universal socket 2P+E 16 A 127/250 Va.c.

- shielded holes - 2 modules EGYPTIAN STANDARD SOCKET
AM5022ET socket 2P+10 A 250 Va.c. - contact tube Ø 4-48
AM5025D duplex socket 2P 16 a 127/250 Va.c. - shielded holes A5022ET - distance 19 mm
- in dual-centre configuration
MULTISTANDARD SOCKET
AM5025DR socket as above, red AM5039 socket 2P+E 5/6/10/13 A 250 Va.c. and 127 Va.c.
A5039 multistandard - 5 A and 13 A = BS std.,
6 A = Indian std., 10 A = European std.
AMERICAN STANDARD SOCKETS
AM5115S socket 2P 15 A 127/250 Va.c. - unshielded holes

AM5115T 2 modules - socket 2P+E 15 A 127/250 Va.c.

A5115T - shielded holes

AM5115DS universal duplex socket 2P+E 16 A 127/250 Va.c.

AM5115DSM - unshielded holes - 3 modules

AM5115DR socket as above, red

AM5115D universal duplex socket 2P+E 16 A 127/250 Va.c.

A5115D - shielded holes - 3 modules

AM5028TS socket 2P+E 15 A 127/250 Va.c.

AM5028TSM - unshielded holes

AM5028T socket 2P+E 15 A 127/250 Va.c.

A5028T - shielded holes

AM5038 socket 2P 15 A 127/250 Va.c.

- TANDEM shielded holes

10
NOTE: White colour device Ivory colour device Neutral item
RJ AND OPTIC CONNECTORS

AM5958/11N AM5982 AM5959/12 AM5979C5E AM5962C5S AM5962C6 AM5951SC

AM5979C6 AM5962C6S AM5962C5E

A5957/12 A5238 AM5951ST AM5951LC A5974AT5

A5974AT6

Item RJ11 - RJ12 CONNECTORS Item RJ45 CONNECTORS

Type of No. of pairs Type of Type of Cat. Type of
connector connection connector connection
AM5958/11N RJ11 2 K10 AM5979C5E RJ45 5E UTP TOOLESS
A5958/11N A5979C5E

AM5982 RJ11 2 A terminal AM5979C6 RJ45 6 UTP TOOLESS

A5982 A5979C6

AM5959/12 RJ12 2 K10 AM5979C6S RJ45 6 STP TOOLESS

A5959/12 (2 modules) A5979C6S

TELEPHONE SOCKET AM5979C5F RJ45 5E FTP TOOLESS

AM5238 telephone socket - ISRAELI standard
A5238
AM5979C6F RJ45 6 FTP TOOLESS
FIBER OPTIC CONNECTORS
AM5951ST* coupling connector for fiber optic cable RJ45 6 STP TOOLESS
AM5979C6A
- ST termination - duplex

AM5951SC* coupling connector for fiber optic cable AM5962C5E RJ45 5E UTP TOOLESS
- SC termination - duplex

AM5951LC* coupling connector for fiber optic cable AM5962C6 RJ45 6 UTP 110
- LC termination - duplex

AM5962C6S RJ45 6 FTP 110

* Items managed on demand. To order consult the BTicino staff

AM5974AT5 RJ45 5E UTP 110

A5974AT5

AM5974AT6 RJ45 6 UTP 110

A5974AT6

MÀTIX CATALOGUE 11
NOTE: White colour device Ivory colour device Neutral item
 AUDIO VIDEO CONNECTORS ELECTRONIC CONTROL

AM4280 AM4281 AM4282 AM4283 AM5702 AM5706 AM5704 AM5713

AM4284 AM4285

Item AUDIO VIDEO CONNECTORS Item DIMMER

AM4280 connector - jack 3.5 AM5702 rotary dimmer - built-in two way switch - MOS-FET
A5702 tech. - built-in fuse 60-500 W 230 Va.c.

AM4281 connector - RCA x 2 AM5706 rotary dimmer 100 - 500 W 230 Va.c.
A4281

AM4269R connector - RCA x 2 - to solder AM4406 rotary dimmer 50 - 300 W 127 Va.c./50-600 W
A4406C 230 Va.c.

AM4282 connector - HD15 AM5704 touch dimmer 50 - 500 W 127 Va.c./50 - 1000 W
A4282 230 Va.c.

AM4283 RCA x 3 connector AM5710 touch dimmer output 0 - 10 V with electronic

A4283 protection - 2 modules

AM4284 HDMI connector AM5713 universal dimmer (resistive – inductive, capacitive,

A4284 A5713 fluorescent compact and dimmer LEDs)
- 150/200/400 W with electronic protection
AM4285 USB connector - 2 modules
A4285 NOTE: to choose the dimmer according to the technical features, see the table below

Loads managed

Item Type Range Supply std Incandescents Halogens with Halogens with Dimmerable Dimmerable Fluorescents
(Va.c.) and halogens ferromagnetic electronic compact LED lamps with 0÷10 V
transormer transformer fluorescents ballast
AM5702 Resistive 230 230 Va.c. 60 ÷ 500 W
A5702 50
AM5706 Resistive 230 230 Va.c. 100 ÷ 500 W
50 ÷ 60
AM4406 Resistive 100 ÷ 240 230 Va.c. 50 ÷ 300 W
A4406C 50 ÷ 60 127 Va.c. 50 ÷ 600 W
AM5704 Resistive 100 ÷ 230 230 Va.c. 50 ÷ 450 W 50 ÷ 300 W
Inductive 50 ÷ 60 127 Va.c. 50 ÷ 800 W 50 ÷ 500 W
AM5710 0 - 10 V 100 ÷ 240 240 Va.c. 20 ÷ 300 VA
50 ÷ 60 100 Va.c. 40 ÷ 600 VA
AM5713 Universal 100 ÷ 240 240 Va.c. 3 ÷ 200 W 3 ÷ 200 VA 3 ÷ 200 VA 3 ÷ 75 W 3 ÷ 75 W
50 ÷ 60 100 Va.c. 3 ÷ 400 W 3 ÷ 400 VA 3 ÷ 400 VA 3 ÷ 150 W 3 ÷ 150 W

12
NOTE: White colour device Ivory colour device Neutral item
ELECTRONIC CONTROL

AM5751N AM5752 AM5433 AM5434

A5155

Item PASSIVE INFRARED SWITCHES Item GREEN SWITCH AND IR SENSOR

AM5751N switch with passive infrared ray movement sensor AM5433 Green Switch: switch with movement sensor,
A5751N - zero crossing - variable threshold twilight circuit through a combination of passive infrared rays
with possibility of exclusion - timing circuit to and ultrasounds, and brightness sensor. Manual
delay switching off which can be adjusted from 30 switching on of the light using the front pushbutton,
seconds to 10 minutes - out put relay 2 A resistive/ and automatic switching off based on brightness
inductive levels and movement. Switch off delay and
- 230 Va.c. power supply - 50 and 60 Hz brightness sensor threshold adjustable using the
AM5752 switch with passive infrared ray movement sensor one/two-way (BMSO4003) remote control, 230 Va.c.
A5752 - variable threshold twilight circuit with possibility power supply.- 2.5 A relay output - 2 modules
of exclusion - timing circuit to delay switching AM5434 Green Switch: switch with passive infrared
off which can be adjusted from 30 seconds to 10 movement sensor - brightness sensor with
minutes which can also be activated by external adjustable threshold and adjustable switch off
pushbuttons - relay output 6 A resistive/2 A delay time - manual switching on of the light using
inductive - with O-A-I selector switch - for resistive the front pushbutton, and automatic switching off
loads up to 200W max - 230 Va.c. power supply - 2 based on brightness levels and movement - 2.5 A
modules - 50 and 60 Hz resistive/inductive relay output - 230 Va.c. power
supply - 2 modules
TIMER
BMSO4003 one-way IR remote control for the selection of the
AM5155 electronic timer with adjustment 1 to 12 minutes AM5433, AM5434 sensor parameters.
A5155 - remote control with pushbuttons – 230 Va.c.
power supply - output contact 10A X 250 Va.c.

GREEN SWITCH - FEATURES

AM5433 AM5434
100-240 V˜
50/60 Hz
2 x 2.5 mm2
NEUTRAL CONNECTION YES NO
(-5) - (+45) °C
300 lux
15 minutes
40-400 W
2000 W - 230 V˜ - 8.5 A 0.2-1.7 A
230 V˜
40-400 VA
1000 VA - 230 V˜ - 4.3 A 0.2-1.7 A
230 V˜
10x (2x36 W) - 230 V˜ - 4.3 A

500 VA - 230 V˜ - 2.1 A

1000 VA - 230 V˜ - 4.3 A

500 VA - 230 V˜ - 2.1 A

MÀTIX CATALOGUE 13
NOTE: White colour device Ivory colour device Neutral item
 TEMPERATURE CONTROL

AM5711 AM5721 F462

AM5712

A5711 N4450 3457 X8000 X8000W

Item THERMOSTATS AND TIMER THERMOSTAT Articolo CONNECTED THERMOSTAT

AM5711 electronic room thermostat – relay output with X8000 the Smarther connected thermostat, together with the
A5711 1 contact in switch ing 2 A 250 Va.c. - 230 Va.c. dedicated Thermostat App, is a device which allows you to
power supply – 50 and 60 Hz adjust and monitor the temperature in the rooms precisely and
AM5712 electronic room thermostat with built-in “summer/ accurately; all the programming and most of the functions are
winter” changeover switch - relay output with performed simply and intuitively using the App. Thanks to its
C-NO 2 A 250 Va.c. contact - 230 Va.c. power supply Wi-Fi connection, Smarther can be programmed and controlled
- 50 and 60 Hz remotely; it can also display the temperature and humidity
AM5721 daily/weekly electronic timer thermostat for measured in the room.
heating and conditioning systems - backlighted The temperature level can be set locally for manual operation
display- power supply with battery 2x1.5 V and the Boost mode can be activated. The Boost forces the
- control possibility by a remote teleactivation and switching on of the system for a limited time (30, 60 or 90
connection with an external temperature sensor minutes) independent of the measured and programmed
- output contact in exchange 1 A - 3 modules temperature.
POLYX CLIMA - 110 ÷ 240 Vac , 50/60 Hz power supply;
N4450 wall-mounting Daily/weekly electronic timer - 2 W max absorption;
thermostat for heating and conditioning systems - Maximum cable section 1 x 1.5 mm2;
- liquid crystal display - power supply with battery - Operating temperature 5 ÷ 40 °C;
2x1.5 V - output contact in exchange 1A cosϕ 0.5 - - Temperature set-point 5 °C ÷ 40 °C;
possibility of connection to a temperature external - Increase of 0.5°C;
sensor - Not modular devices for wall-mounting - 1-contact output in switching free of 5(2)A potential.
installation - Type of activation 1BU
ACCESSORIES FOR POLYX CLIMA
- Pollution level 2
- Rated pulse voltage 4 kV
F462 GSM telefonic actuator - 4 DIN modules
- Wireless device in compliance with 802.11b/g/n standard,
frequency 2.4 – 2.4835 GHz, transmission power < 20 dBm.
WPA/WPA2 safety protocol.
3457 external probe Types of installation: flush mounted
X8000W Features: X8000.
Installation: on the wall, using screws and dowels suitable for
the installation surface (brickwork, plasterboard, tiles etc.).

App for Smarther thermostat

14
NOTE: White colour device Ivory colour device Neutral item
AUDIBLE AND OPTICAL OPTICAL SIGNALLING DEVICES
SIGNALLING DEVICES

AM5031 AM5060B AM5062B AM5060V A5386/12B A5386/24B A5386/230B A5630V12V24

AM5041 A5386/12R A5386/24R A5386/230R A5630/230
A5386/12V A5386/24V A5386/230V

A5045N A5060B A5060A A5060R A5631V12V24 A5625V12V24

A5048N A5631/230 A5625/230

Item BUZZERS AND BELLS Item PLATES FOR OUTSIDE-DOOR SIGNALLING

AM5031 bronze bell 12 Va.c. - 5 VA - 80 dB A5386/12B power supply 1 V - red, green, white colour LED
A5031N A5386/12V supplied - 0.6 W
A5386/12R
AM5041 bronze bell 230 Va.c. - 11 VA - 80 dB A5386/24B power supply 24 V - red, green, white colour LED
A5041N A5386/24V supplied - 0.6 W
A5386/24R
AM5045 buzzer 12 Va.c. - 5VA - 74 dB A5386/230B power supply 230 V - red, green, white colour LED
A5045N A5386/230V supplied - 0.6 W
A5386/230R
AM5048 buzzer 230 Va.c. - 10VA - 75 dB NOTE: all the models should be installed between 160 and 205 cm above the ground.
A5048N When the installation is complete the device protrudes 52 mm from the wall.
STEP MARKER LAMP
ELECTRONIC BUZZER AND BELL A5630V12V24 step marker lamp with white light LED - 12/24 Va.c.
AM5755/12 electronic bell - 3 different rings - with front - ON OFF switch
volume adjustment - power supply 12 Va.c./d.c.
- 2 modules A5630/230 step marker lamp with white light LED - 230 Va.c.
AM5045EL electronic buzzer 12 Va.c. - ON OFF switch

A5631V12V24 step marker lamp with white light LED - 12/24 Va.c.
LAMP-HOLDER
AM5062B double lamp-holder with 2 diffussers: 1 orange + 1
A5062B clear - for lamps item LN4742V230T - LN4742V127T A5631/230 step marker lamp with white light LED- 230 Va.c.
- LN4742V12T
AM5064V double lamp-holder with 2 diffussers: 1 red + 1
A5064V green - for lamps item LN4742V230T - LN4742V127T SIGNALLING LAMPS
- LN4742V12T A5625V12V24 signalling lamp with high luminous efficiency
AM5060A lamp-holder with orange diffuser - for lamps item white light LED - 12/24 Va.c.
A5060A LN4742V230T - LN4742V127T - LN4742V12T
A5625/230 signalling lamp with high luminous efficiency
AM5060R lamp-holder with red diffuser - for lamps item white light LED - 230 Va.c.
A5060R LN4742V230T - LN4742V127T - LN4742V12T

AM5060B lamp-holder with clear diffuser - for lamps item

A5060B LN4742V230T - LN4742V127T - LN4742V12T

AM5060V lamp-holder with green diffuser - for lamps item

A5060V LN4742V230T - LN4742V127T - LN4742V12T

MÀTIX CATALOGUE 15
NOTE: White colour device Ivory colour device Neutral item
 EMERGENCY LAMPS SAFETY DEVICES

A5780N 4380NB A5774/1 AM5206S AM5130 AM5114

A5774/3 AM5210S
AM5216S

L4784/1 L4786/1 A5088 A5471 A5246S

L4784/3 L4786/3 A5250S
A5256S

AUTOMATIC THERMAL-MAGNETIC CIRCUIT

Articolo REMOVABLE LED LAMP Item BREAKERS
A5780N It automatically turns on in case of power failure. AM5206S automatic thermal-magnetic circuit breakers
Push&Pull extracting system - high efficiency A5206S 1P+N 6 A 230 Va.c.- contacts open or closed
white LED - ON/OFF switch and SPOT button to indicator - breaking power 1500 A 230 Va.c.
increase light intensity if needed - interchangeable AM5210S circuit breaker as above 10 A - breaking power
Ni-MH batteries with 2h duration - low consuption A5210S 3000 A 230 Va.c.
in stand-by 0,4W - 127/230V power supply.
Recharging base, 2 modules. AM5216S circuit breaker as above 16 A - breaking power
4380NB spare battery for rechargeable torch art. A5780N A5216S 3000 A 230 Va.c.

AUTOMATIC EARTH-LEAKAGE CIRCUIT

EMERGENCY LAMPS BREAKERS 230 Va.c.
A5774/1 emergency lamp which automatically switches AM5246S Salvavita - two-pole automatic thermal-magnetic
on when there is a power failure - voltage ON A5246S circuit with one protected I.n 10 mA - 6 A 230 Va.c.
signalling LED - local disabling pushbutton - contacts open or closed indicator - test pushbutton
- can be excluded remotely by means of a switch - breaking power 1500 A 230 Va.c. - 2 modules
- rechargeable replacement nickel-cadmium battery AM5250S Salvavita as above - 10 A - breaking power 3000 A
- autonomy 1 hours - 230 Va.c. power supply - lamp A5250S 230 Va.c.
power 1 W - 4 modules
A5776/1 emergency lamp as above - 1 hour autonomy AM5256S Salvavita as above - 16 A - breaking power 3000A
lamp power 1.3 W - 6 modules A5256S 230 Va.c.

L4784/1 spare battery for lamp item A5774/1 INTERLOCKED SOCKETS

2P+E socket with shielded pins - degree of
protection 2.1 - interlocked with automatic thermal-
L4786/1 spare battery for lamp item A5776/1 magnetic circuit breaker 1P + N - 2 modules
In Vn Breaking
power
A5781 emergency LED lamp which automatically switches AM5114 10A 230 Va.c. 3000 A
on when there is a power failure - 230 Va.c. - 230 Va.c.
50/60 HZ - consuption 2,5 VA (0,1W) - rechargeable
not replacement battery 3,6 V 140 mA - autonomy AM5130 16A 230 Va.c. 3000 A
2 hours - Maximum cable section 1 x 1.5 mm2 - - 230 Va.c.
Light intensity 2400 mcd - emission angle 120 ° -
not removable - 1 module

16
NOTE: White colour device Ivory colour device Neutral item
SAFETY DEVICES BACKLIGHTING LED

AM5088 LN4742V230 H4743/230B

LEDs FOR CONTROLS AND PILOT LIGHTS

LED colour 230 Va.c. 127 Va.c. 12 - 24 Va.c.
Amber LN4742V230 LN4742V127 LN4742V12
Green LN4742V230V LN4742V127V LN4742V12V
White LN4742V230T* LN4742V127T* LN4742V12T*
A5471
* and for BS devices

LED LAMP FOR BACKLIGHT

Item FUSE-CARRIERS AND FUSES LED colour 230 Va.c. 127 Va.c. 12 - 24 Va.c.
AM5088 fuse-carrier for 5 x 20 and 6.3 x 32 fuse Blue H4743/230B H4743/127B H4743/12B
A5088 - max. 13 A 250 Va.c.
Amber LN4743/230A LN4743/127A LN4743/12A
AM5089 fuse-carrier for 16 A fuse Green LN4743/230V LN4743/127V LN4743/12V
A5089
White LN4743/230T LN4743/127T LN4743/12T
SURGE ARRESTERS
AM5471 1P surge arrester to be coupled with the user
A5471 power supply socket LED USING FOR BACKLIGHTING
- rated discharge current In = 1 kA For devices - items LN4742V230 LN4742V230T H4743/230B
- maximum current Imax = 2 ka LN4742V127 LN4742V127T H4743/127B
- max protection voltage Up = 1 kV LN4742V12 LN4742V12T H4743/12B
- rated voltageUn=110-230 Va.c. LN4742V230V LN4743/230A
LN4742V127V LN4743/127A
- max permanent voltage Uc = 250 Va.c. LN4742V12V LN4743/12A
LN4743/230V
CARTRIDGE FUSES LN4743/127V
T/... 4-6-10-16-20 A - 400 V - breaking capacity LN4743/12V
50 KA ceramic body -ø 8.5x31.5 mm LN4743/230T
LN4743/127T
T1/... 4-6-10 -16-20-25 A - 400 V - breaking LN4743/12T
capacity 50 KA ceramic body - ø 9x36 mm
AM5001, AM5001/2, AM5003, n
T0/... 2-4-6-10-16A - 250V - breaking AM5003/2 AM5005, AM5005/2,
capacity 1.5KA ceramic body for home AM5001L, AM5003L, AM5005L
series devices - ø 6x28 mm AM5012, AM5012/2 n
To be used with AM5089 fuse carrier AM5057B, AM5057R, n
AM5057V, AM5057A
NOTE: specify in the order the desired rated current
AM5008 n
AM5060A, AM5060B, n
AM5060R, AM5060V
AM5062B, AM5064V n
AM5051N, AM5053N, n
AM5055N
Note: list for MÀTIX white colour devices and relative ivory colour devices (item code A...)

MÀTIX CATALOGUE 17
NOTE: White colour device Ivory colour device Neutral item
 GAS DETECTORS ACCESSORIES

AM5731/12 AM5732/12 503CG 503EC-504EC-506EC 503EV 503ED

506EV

Box
extension

AM5730 AM5734 L4525/12NO F91/12E PBD68

Item GAS DETECTORS Item BOX AND ACCESSORIES

AM5731/12 METHANE gas detector with optical and audible 503CG protective cover which can be used during wall
85 dB alarm signal - internal self-diagnosis - set finishing work
up for signal repeater control - power supply 12
Va.c./d.c. - 2 modules 503EC finishing cover for closing – can be dyed - for item
AM5732/12 detector as above for GPL gas 503E

504EC finishing cover as above for item 504E

SIGNAL REPEATER
AM5730 signal repeater for gas detectors - optical/audible
signalling - relay output with 1 contact in switching 506EC finishing cover as above for item 506E
6 A resistive 2 A inductive - 2 modules
TRANSFORMERS
AM5734 safety transformer - input 230 Va.c. - 50/60 Hz- 503EV internal resin separator - vertical
output 12 Va.c. - power 4 VA - 2 modules

F91/12E DIN safety transformer - input 230 Va.c. - 50/60 Hz 506EV internal resin separator for item 506E- horizontal
- output 12 Va.c. - power 6 VA - enclosure for DIN
rail - 3 modules
SOLENOID VALVE 503ED horizontal and vertical coupler
L4525/12NO normally open gas solenoid valve - manual reset
- power supply 12V 50 Hz - absorbed power 3 VA
- absorption at rest zero - max pression 500 mbar 503DE internal resin divider for boxes item 504E
- degree of proteciton IP 65 - operating temperature
- 15 to +60 °C - threaded couplings 3/4” and
reduction supplied 1/2” 503SAP protection sheath for 3 module frame can be used
during finishing plastering works

500/02 pair of 30 mm screws for the installation of the

CONTROL BACKLIGHTING LED CONNECTION
frames on boxes fitted below the wall plaster line
Note for the connection of 230 V.a.c. (or 127 Va.c.) LEDs for the backlighting of
control devices: when LEDs are fitted to help locate the control itself, it must be
taken into account that energy saving and fluorescent lamps do not allow in series ACCESSORY FOR HOLLOW MILLING CUTTER
connection of the LED on the load. It is therefore necessary to also take a neutral PBD68 disk-type cutter for the installation of boxes in
conductor near the control, so that the LED may be connected directly between plasterboard
phase and neutral, and will always be on.

BOX EXTENSION - FOR ITALIAN STANDARD

EXAMPLES OF LED CONNECTION ON A SWITCH adapter, for increasing the depth of 503E flush
503ESE
function: locating function: load status LED mounted boxes
F F F F
N N N N
504ESE adapter, for increasing the depth of 504E flush
mounted boxes
506LSE adapter, for increasing the depth of 506L flush
mounted boxes
506ESE adapter, for increasing the depth of 506E flush
mounted boxes

These adapters may be used when installing the box. They make wiring easier
in case of several cables inside the same box, or for particularly deep devices.
18
NOTE: White colour device Ivory colour device Neutral item
HOTEL OFFER RANGE
This page lists the devices specifically intended for hotel room services. The Some of them are, for example:
BTicino hotel room offer range, and in more general terms for the hotel sector, - comfort devices = light, curtain, and scenario controls with dedicated symbols.
includes however many more devices that are also used in other sectors, Also, thermostats, and temperature probes with knobs
and are therefore listed in various sections throughout this catalogue. - audio and video devices = connectors for every need, and sound signalling devices
- safety devices = step lights, and emergency lamps

AM5765 A5765 AM5052H AM5064VH AM5460 AM5006 AM5285C

A5765/2

Item BADGE-HOLDER POCKET Item SHAVER SOCKET

AM5765 badge-holder pocket with switch to switch ON AM5460 shaver socket with insulation transformer - input
A5765 lights and devices in hotel rooms - slot light A5460 voltage 230 Vac @ 50/60 Hz - output voltage
with built-in lamp - switch-off delay - max. 115/230 Vac 20 VA - 3 modules - colour white
load 30 VA 230 Vac - 3 modules - white
AM5765/2 badge-holder pocket with switch to switch ON CORD PUSHBUTTON
A5765/2 lights and devices in hotel rooms - slot light with AM5006 1P (NO) 10 A - 250 Vac cord pushbutton
built-in lamp - switch-off delay - max. load 30 A5006N - colour white
VA 230 Vac - for universal box of 60 mm - white
L4546 key-holder card for badge-holder pocket
USB CHARGER
AM5765 - A5765 - AM5765 and A5765/2
AM5285C1 5 Vdc USB charger to be used only for recharging
electronic devices up to 1100 mA like mobile
CHANGEOVER SWITCH AND LAMPHOLDER FOR phones, smartphones, tablets and similar - 110-
OFF-DOOR SIGNALLING 230 Va.c. power 50÷60 Hz supply
AM5064VH off-door lampholder with double optical AM5285C2 5 Vdc USB charger for quick charge of one single
signalling: «do not disturb» and «rearrange the electronic device (mobile phones, smartphones,
room» – use 2 LEDs item LN4742V12T (12V) tablets or similar) up to 2400 mA or simultaneous
AM5052H 1P 16 A – 250 Vac double-key changeover switch charging of two devices up to 1200 mA
PLEASETURB
DO NOT
DIS
1-0-2 with interlock and double signalling: - 110÷230 Vac 50÷60 Hz power supply
«do not disturb» and «rearrange the room».
PLEASEROOM
UP THE
MAKE

To be used with the lampholder AM5064VH

MÀTIX CATALOGUE 19
NOTE: White colour device Ivory colour device Neutral item
 ANTIMICROBIAL RANGE
The antimicrobial effect of MÀTIX devices and cover plates stems from the The effectiveness of BTicino’s antimicrobial products has been tested by authorised
construction of their material based on silver ions (Ag+). laboratories. The usual cleaning procedures must however be retained in order
This technology means that the antimicrobial range can guarantee the non- to guarantee perfect hygiene. The ideal use for MÀTIX antimicrobial devices is in
proliferation of bacteria, viruses and fungi without creating any immunisation or medical surroundings (hospitals, nursing homes, consulting rooms, diagnostic
resistance effects (physical destruction and not chemical). rooms and similar), public buildings (old peoples’ homes, nurseries, toilet facilities,
etc.) or catering facilities (canteens, bars).

AM5001AB AM5011AB AM5006AB AM5037AB AM5180AB AM5440V2AB AM5440V16AB AM5202ABD

ANTIMICROBIAL SOCKET OUTLETS

Item ANTIMICROBIAL CONTROL DEVICES Item - ITALIAN STANDARD
AM5001AB 1P 16 AX - 250 Vac switch - lightable with AM5180AB 2 P+E 16 A 250 Vac socket - centre distance 19 mm
LN4742V230 - LN4742V127 - LN4742V12 LEDs and 26 mm - shielded tulip contacts - for plugs 2 P
replacing the original key cover (opaque) with one and 2 P+E 10 and 16 A ITALIAN standard
of the lightable key covers A5180RAB socket as above - colour red
AM5001AAB as above switch - with AUTOMATIC CLAMPS

ANTIMICROBIAL SOCKET OUTLETS - GERMAN AND

AM5011AB 2P 16 AX – 250 Vac switch ITALIAN STANDARDS
AM5440V2AB 2 P+E 16 A 250 Vac socket with earth side contacts
AM5440V2AAB - shielded tulip contacts
AM5003AB 1P 16 AX – 250 Vac two-way switch - lightable
with LN4742V230 - LN4742V127 - LN4742V12 LEDs AM5440V16AB 2 P+E 16 A 250 Vac socket - centre distance 19 mm
replacing the original key cover (opaque) with one and 26 mm in 2-centre configuration - protected
of the lightable key covers tulip contacts ; earth side contacts for German
AM5003AAB as above switch - with AUTOMATIC CLAMPS standard plugs; suitable for: 2 P and 2 P+E 10/16 A
Italian standard plugs, 2 P+E 16 A German
standard plugs
AM5012AB 16 AX – 250 Vac inverter A5440V16RAB socket as above - colour red

AM5005AB 1P (NO) 10 A – 250 Vac pushbutton - lightable ANTIMICROBIAL SHAVER SOCKET

with LN4742V230 - LN4742V127 - LN4742V12 LEDs AM5460AB shaver socket with insulation transformer
replacing the original key cover (opaque) with one - input voltage 230 Vac @ 50/60 Hz
of the lightable key covers - output voltage 115/230 Vac 20 VA
AM5005AAB as above switch - with AUTOMATIC CLAMPS
ANTIMICROBIAL TV SOCKET
AM5202ABD Star coaxial socket for single-user aerial systems,
AM5006AB 1P (NO) 10 A – 250 Vac cord pushbutton also remote powered and centralised, and single-
user / centralised satellite systems with current
and signal transfer for channels selection; shielded
connection clamps with captive screws - Ø 9.5 mm;
AM5037AB 1P (NO) + 1P (NO) 10 A – 250 Vac interlocked
male connector - 1 module
double pushbutton

ANTIMICROBIAL LIGHTABLE KEY COVER

AM5921LAB neutral lightable key cover

AM5921AAB lightable key cover with “lamp” symbol

AM5921DAB lightable key cover with “bell” symbol

AM5921FAB lightable key cover with “key” symbol

20
NOTE: White colour device Ivory colour device Neutral item
 ANTIREMOVAL COVER PLATES

AM5958/11NAB AM5979C6AB AM5060RAB AM5702AB

AM4803BAB AM4803WAR

Item ANTIMICROBIAL RJ11 CONNECTOR Item ANTI-REMOVAL COVER PLATES IN ZAMAK

Type of No. of For plug Type of AM4803WAR cover plate complete with frame
connector pair item connection - 3 modules - colour white
AM5958/11NAB RJ11 2 2841/2 K10
AM4804WAR cover plate complete with frame
- 4 modules - colour white
ANTIMICROBIAL RJ45 CONNECTORS
Type of Category Type Type of AM4803NAR cover plate complete with frame
connector connection - 3 modules - colour native
AM5979C6AB RJ45 6 UTP Toolless IDC
AM4804NAR cover plate complete with frame
- 4 modules - colour native
AM5979C6AAB RJ45 6 shielded Toolless IDC
NOTE: these cover plates are supplied complete with frame on which they are fixed
by 4 Torx screws with slot. The assembly can make a tamper-proof light point whose
ANTIMICROBIAL LAMPHOLDER installation is recommended in unmonitored rooms where the public is present.
AM5060RAB lampholder with red diffuser - lightable with
LN4742V230T - LN4742V127T - LN4742V12T LEDs ANTI-REMOVAL COVER PLATES IN PAINTED ZAMAK

ANTIMICROBIAL DIMMER
AM5702AB knob dimmer with built-in two way switch
- with built-in fuse - resistive 60 - 500 W

ANTIMICROBIAL BLANK PLATE

AM5000AB blank plate screws with
specific frame Torx head
supplied with the
cover plate
ANTIMICROBIAL POLYMER PLASTIC COVER PLATES cover plate in
AM4802BAB 2 module cover plate - colour white PAINTED ZAMAK

AM4803BAB 3 module cover plate - colour white

AM4804BAB 4 module cover plate - colour white

NOTE: antimicrobial cover plates can be identified by the logo on the right
ANTIMICROBIAL POLYMER PLASTIC COVER PLATE

“ANTIMICROBIAL” logo

traditional frame 503SA 3-module cover plate with pressure

fitting on the normal frames

MÀTIX CATALOGUE 21
NOTE: White colour device Ivory colour device Neutral item
 AREA ITALIAN INSTALLATION SYSTEM
Single installation
Boxes Frames No. of modules Plates

500 502BI 2 modules

(Ø 60x44 mm) 500SM2A AM4802...

502E PB502N
(70x70x50 mm) (Ø 68x51 mm) 2 modules
for plasterboard 500S/23A AM4819...*

AM4803M1...*
3 modules
503E 503BI 503SA
(106x71x52 mm)
AM4803...

PB503N
(109x68x51 mm) 2 modules
for plasterboard 503S/2A AM4819...*

504E 504BI
(133x74x53,5 mm)

4 modules
504SA AM4804...
PB504N
(131,5x68x51 mm) for plasterboard

506L
(183,5x90x53,5 mm)

6 modules
506LSA AM4806...
PB506N
(182x68x51 mm) for plasterboard

506E PB526N for plasterboard 506SA 3+3 modules AM4826...

(108x118x51,5 mm) (109x114x51 mm)

22
* not available in the “colours” family range (see following page)
AREA ITALIAN INSTALLATION SYSTEM
Cover plates colours in tecnopolymers

WHITES

White - BBN Ivory - BAV Cord - BCD Ash - BCN

METALLICS

Silver - MSL Iron - MIR Gold - MGL Titanium - MTA

TEXTURES

Lime white - TBC Terracotta - TRT Brown coffee - TGG Blue mercury - TBM

COLOURS

Ice - CBN Ivory - CAV Green tea - CVC Turquoise - CAR

Coral - CRD Amber - CAB Emerald - CVS Cobalt - CBU

GALVANICS

Shiny chrome - GCR Shiny gold - GOR Satin gold - GOS

MÀTIX CATALOGUE 23
NOTE: The devices are available also in ivory version; for more details please see catalogue section.
 COVER PLATES: TABLE FOR SELECTING CODE
Area Italia installation system
MODULES

2 1 centered 2 centered 3 4 6 in line 3 +3

WHITES
White AM4802BBN AM4803M1BBN AM4819BBN AM4803BBN AM4804BBN AM4806BBN AM4826BBN
Ivory AM4802BAV AM4803M1BAV AM4819BAV AM4803BAV AM4804BAV AM4806BAV AM4826BAV
Cord AM4802BCD AM4803M1BCD AM4819BCD AM4803BCD AM4804BCD AM4806BCD AM4826BCD
Ash AM4802BCN AM4803M1BCN AM4819BCN AM4803BCN AM4804BCN AM4806BCN AM4826BCN
METALLICS
Silver AM4802MSL AM4803M1MSL AM4819MSL AM4803MSL AM4804MSL AM4806MSL AM4826MSL
Iron AM4802MIR AM4803M1MIR AM4819MIR AM4803MIR AM4804MIR AM4806MIR AM4826MIR
Gold AM4802MGL AM4803M1MGL AM4819MGL AM4803MGL AM4804MGL AM4806MGL AM4826MGL
Titanium AM4802MTA AM4803M1MTA AM4819MTA AM4803MTA AM4804MTA AM4806MTA AM4826MTA
TEXTURE
Lime white AM4802TBC AM4803M1TBC AM4819TBC AM4803TBC AM4804TBC AM4806TBC AM4826TBC
Terracotta AM4802TRT AM4803M1TRT AM4819TRT AM4803TRT AM4804TRT AM4806TRT AM4826TRT
Brown coffee AM4802TGG AM4803M1TGG AM4819TGG AM4803TGG AM4804TGG AM4806TGG AM4826TGG
Blue mercury AM4802TBM AM4803M1TBM AM4819TBM AM4803TBM AM4804TBM AM4806TBM AM4826TBM
COLOURS
Ice AM4802CBN AM4803CBN AM4804CBN AM4806CBN AM4826CBN
Ivory AM4802CAV AM4803CAV AM4804CAV AM4806CAV AM4826CAV
Green tea AM4802CVC AM4803CVC AM4804CVC AM4806CVC AM4826CVC
Turquoise AM4802CAR AM4803CAR AM4804CAR AM4806CAR AM4826CAR
Coral AM4802CRD AM4803CRD AM4804CRD AM4806CRD AM4826CRD
Amber AM4802CAB AM4803CAB AM4804CAB AM4806CAB AM4826CAB
Emerald AM4802CVS AM4803CVS AM4804CVS AM4806CVS AM4826CVS
Cobalt AM4802CBU AM4803CBU AM4804CBU AM4806CBU AM4826CBU
GALVANICS
Shiny crome AM4802GCR AM4803M1GCR AM4819GCR AM4803GCR AM4804GCR AM4806GCR AM4826GCR
Shiny gold AM4802GOR AM4803M1GOR AM4819GOR AM4803GOR AM4804GOR AM4806GOR AM4826GOR
Satin gold AM4802GOS AM4803M1GOS AM4819GOS AM4803GOS AM4804GOS AM4806GOS AM4826GOS

FRAME
500S/23A
500SM2A 503SA 503SA 504SA 506LSA 506SA
503S/2A

24
SPECIAL COVER PLATES

Anti-removal cover plates in zamak

The anti-removal cover plates

are fixed to the frame by means
of 4 Torx screws with slot
Specific frame supplied AM4803WAR - 3 modules - white AM4803NAR - 3 modules - native
with the cover plate AM4804WAR - 4 modules - white AM4804NAR - 4 modules - native

Antimicrobial polymer plastic cover plates

Traditional frame AM4802BAB - 2 modules - white

AM4803BAB - 3 modules - white
AM4804BAB - 4 modules - white
NOTE: antimicrobial cover plates form part of a complete product range, ideal for medical surroundings – see the “Solutions for health structures and care homes” chapter.

Installation on plasterboard, masonry wall and profiles

BOXES COPERCHI NO. OF MODULES COVER PLATES WITH FRAME

1 module
510LN 510L AM4811/1BN AM4811/1SL
(white) (silver)

510LN 510L

2 modules
AM4811/2BN AM4811/2SL
510LN 510L (white) (silver)
NOTE: either white or ivory devices can be installed.

MÀTIX CATALOGUE 25
 IP44 UNIVERSAL COVER

IP44 protection cover (guaranteed when closed). Ideal for

installation where an IP44 protection degree is required.
It is fully compatible with all ranges, both BTicino and
other brands. It’s made using high quality materials that
ensure long-term resistance in all weather conditions.
It can be installed on Italian standard 3-module flush mounted box.
Size: H=11.6 mm - L=14.3 mm

26603

IDROBOX - IP55 WATERPROOF COVERS

DESCRIPTION DESCRIPTION DESCRIPTION

Installation Installation
on 502E on 502E
flush-mounting flush-mounting
box 2 modules box 2 modules
grey RAL7035 white
25602 25602B

Installation Installation Installation

on 503E on 503E on 503E
flush-mounting flush-mounting flush-mounting
box3 modules box 3 modules box blank
grey RAL7035 white grey RAL7035
25603 25603B 23940

Installation Installation
on 504E on 504E
flush-mounting flush-mounting
box 4 modules box 4 modules
grey RAL7035 white
25604 25604B

IDROBOX PLUS
DESCRIPTION DESCRIPTION DESCRIPTION

wall-mounting two wall-mounting nameplate

way switch - IP55 housing pushbutton 26108L
- 2 Màtix - for 503E, 502E,
26003 modules boxes
- guarantee IP55 - finishes:
26055
when cover is anthracite,
closed white and tech
- IP55 26108N
wall-mounting
pushbutton - IP55

26005
26108T

wall-mounting wall-mounting
adapter for 503E enclosure - with enclosure for Màtix
boxes to mount two way switch sockets - IP66 (the
the items: 26003, and 2 Màtix IP protection rate
26005, 26055. module is guarantee when
23953 housing - IP55 26200 plugs is in and
cover is closed). 26066

26
IDROBOX - IP40 WALL-MOUNTING ENCLOSURES

DESCRIPTION DESCRIPTION DESCRIPTION

1 module 2 modules 3 modules

25401 25402 25403

4 modules 4 modules 6 modules

25404 25404/2 25406

8 modules 12 modules 16 modules

25408 25412 25416

4 modules 6 modules 8 modules 12 modules

25404/2V 25406V 25408V 25412V

IDROBOX - IP55 WALL-MOUNTING ENCLOSURES

DESCRIPTION DESCRIPTION DESCRIPTION

1 horizontal 2 horizontal 3 horizontal

module modules modules

25501 25502 25503

4 horizontal 8 vertical 12 vertical

modules modules modules

25504 25508V 25512V

MÀTIX CATALOGUE 27
 IDROBOX - ACCESSORIES FOR WALL MOUNTING ENCLOSURES

23983 23984 25700 25700F/16 25701 25702

25700F/20 25701V

23854 23858 23866/20

Item IP55 WALL-MOUNTING JUNCTION BOXES Item ACCESSORIES FOR IP40 AND IP55 BOXES
Module Dimension in mm 25700 elastic cable gland Ø from 5 to 14-16-20 mm – IP55
23983 503 94x82x58 25700F/16 IP55 quick-coupling conduit clamp for Ø 16 mm conduit
23984 504 142x82x58 25700F/20 IP55 quick-coupling conduit clamp for Ø 20 mm conduit
ACCESSORIES FOR JUNCTION BOXES 25701 horizontal partition
23854 fairlead Ø 16 mm 25701V vertical partition
23858 threaded adapter - PG16 pitch 25702 internal terminal for earth connection
23866/20 quick-coupling conduit clamp Ø 20 mm

28
 BTicino SpA
Viale Borri, 231

www.bticino.com
21100 Varese - Italy

BTicino SpA reserves at any time the right to modify the contents of this booklet and to communicate,
AD-EXMX18S/3C/GB - Edition 11/2017
in any form and modality, the changes brought to the same.