Grooved-End Fittings B-15

Shurjoint Grooved Fittings

Most fittings are provided in ductile iron conforming to ASTM A536 Gr. 65-45-12
and or ASTM A395 Gr. 65-45-15. Some styles and sizes larger than 14”
(350mm) are fabricated from carbon steel pipe to ASTM A53 Gr. B or fabricated
of segmentally welded steel of the same or equivalent grade. Fittings are
painted orange or red, or as an option can be supplied hot-dip galvanized or
epoxy coated. Pressure ratings conform to couplings and/or pipe being used.

Flow Data / Frictional Resistance

Flow Data
Elbows Tees
Nominal #7110 90o #901 90o #7110LR 90o #7111 45o #7111LR 45o #7120 #903
Pipe Pipe Pipe Wall Standard Short. Long Radius Standard Long Radius
Size O.D. Thickness Radius Radius (1.5 D LR) Radius (1.5 D LR) Branch Branch
in in in feet feet feet feet feet feet feet
mm mm mm meters meters meters meters meters meters meters
1 1.315 0.133 1.7 --- --- 0.8 --- 4.2 ---
25 33.4 3.4 0.5 --- --- 0.2 --- 1.3 ---
1¼ 1.660 0.140 2.5 2.5 --- 1.0 --- 4.7 4.7
32 42.2 3.6 0.8 0.8 --- 0.3 --- 1.4 1.4
1½ 1.900 0.154 3.5 3.5 --- 1.5 --- 6.5 6.5
40 48.3 4.0 1.1 1.1 --- 0.5 --- 2.0 2.0
2 2.375 0.203 4.0 4.0 2.5 1.7 1.1 8.5 8.5
50 60.3 5.2 1.2 1.2 0.8 0.5 0.3 2.6 2.6
2½ 2.875 0.197 4.5 4.5 2.9 2.0 1.4 10.0 10.0
65 73.0 5.0 1.4 1.4 0.9 0.6 0.4 3.1 3.1
3 3.500 0.237 5.0 5.0 3.8 2.5 1.5 12.0 12.0
80 88.9 6.3 1.5 1.5 1.2 0.8 0.5 3.7 3.7
4 4.500 0.220 6.7 6.7 5.0 3.0 2.1 15.0 15.0
100 114.3 5.6 2.0 2.0 1.5 0.9 0.6 4.6 4.6
5 5.563 0.258 7.5 7.5 6.0 4.0 2.5 19.0 19.0
125 141.3 6.6 2.3 2.3 1.8 1.2 0.6 5.8 5.8
6 6.625 0.280 9.0 9.0 7.5 4.5 3.0 22.0 22.0
150 168.3 7.1 2.7 2.7 2.3 1.4 0.9 6.7 6.7
8 8.625 0.322 13.0 13.0 9.8 6.5 4.0 33.0 33.0
200 219.1 8.2 4.0 4.0 3.0 2.0 1.2 10.1 10.1
10 10.750 0.365 17.0 --- 12.0 8.3 5.0 41.0 ---
250 273.0 8.8 5.2 --- 3.7 2.5 1.5 12.5 ---
12 12.750 0.375 20.0 --- 14.5 10.0 6.0 49.0 ---
300 323.9 9.5 6.1 --- 4.4 3.1 1.8 14.9 ---
14 14.000 0.375 24.5 22.3 --- 13.8 --- 69.9 69.9
350 355.6 9.5 7.5 6.8 --- 4.8 --- 21.3 21.3
16 16.000 0.375 28.0 25.3 --- 15.8 --- 80.0 80.0
400 406.4 9.5 8.5 7.7 --- 4.8 --- 24.4 24.4
18 18.000 0.375 31.0 28.2 --- 18.7 --- 89.9 89.9
450 457.2 9.5 9.5 8.6 --- 5.7 --- 27.4 27.4
20 20.000 0.375 34.0 30.8 --- 20.9 --- 100.0 100.0
500 508.0 9.5 10.4 9.4 --- 6.3 --- 30.5 30.5
24 24.000 0.375 42.0 37.7 --- 24.2 --- 120.0 120.0
600 609.6 9.5 12.8 11.5 --- 7.4 --- 36.6 36.6
The values listed in this table express the frictional resistance of representative Shurjoint fittings as equivalent feet (meters) of straight pipe. For the branch of
a tee that is reduced in size, use the value that corresponds to the branch size. For example, the branch value of a 4” x 4” x 3” tee is 12.0 feet (3.7 meters).
For fittings not listed in this table, the equivalent length of straight pipe can be estimated from the data provided. For example, the flow resistance of a 22½ o
elbow is approximately one half that of a 45o elbow.

B-15- 1/1 Rev.F 20160314