Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 77 views

    Aircol SR 68

    Uploaded by

    nauta007
    Aircol SR 68 is a synthetic compressor oil intended for use in marine turbochargers and rotary compressors. It provides benefits like extended service intervals, reduced maintenance, and cleaner operation compared to mineral and synthetic oils. Aircol SR 68 is particularly suitable for oil-flooded rotary screw compressors due to its outstanding oxidation stability and anti-wear performance. It is not recommended for use in reciprocating air compressors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Aircol SR 68

    Uploaded by

    nauta007
    77 views2 pages
    Aircol SR 68 is a synthetic compressor oil intended for use in marine turbochargers and rotary compressors. It provides benefits like extended service intervals, reduced maintenance, and cleaner operation compared to mineral and synthetic oils. Aircol SR 68 is particularly suitable for oil-flooded rotary screw compressors due to its outstanding oxidation stability and anti-wear performance. It is not recommended for use in reciprocating air compressors.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Aircol SR 68 is a synthetic compressor oil intended for use in marine turbochargers and rotary compressors. It provides benefits like extended service intervals, reduced maintenance, and cleaner operation compared to mineral and synthetic oils. Aircol SR 68 is particularly suitable for oil-flooded rotary screw compressors due to its outstanding oxidation stability and anti-wear performance. It is not recommended for use in reciprocating air compressors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    77 views2 pages

    Aircol SR 68

    Uploaded by

    nauta007
    Aircol SR 68 is a synthetic compressor oil intended for use in marine turbochargers and rotary compressors. It provides benefits like extended service intervals, reduced maintenance, and cleaner operation compared to mineral and synthetic oils. Aircol SR 68 is particularly suitable for oil-flooded rotary screw compressors due to its outstanding oxidation stability and anti-wear performance. It is not recommended for use in reciprocating air compressors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Product Data

    Aircol SR 68
    Synthetic turbocharger and rotary compressor oil

    Description
    Aircol SR 68 is a polyalphaolefin-based synthetic compressor oil, using an advanced additive system to enhance thermal
    and oxidation stability and reduce component wear.

    Application
    Aircol SR 68 is intended for use in Marine turbochargers and rotary compressors where it will provide significant in-service
    benefits when compared with other mineral and synthetic based lubricants.

    Aircol SR 68 is also particularly suitable for use in oil-flooded rotary screw compressors. It has outstanding oxidation
    stability and anti-wear performance. The ester-free formulation eliminates acidic corrosion resulting from hydrolysis.

    Aircol SR 68 is not suitable for use in Reciprocating Air Compressors for which Aircol SN is recommended.

    Conditions of Use
    Avoid prolonged or repeated contact with skin. Wash thoroughly after handling.

    Advantages
    Aircol SR 68 provides significant benefits when used as a system oil in separately lubricated turbochargers, where
    extended oil change intervals will be possible.

    The performance of Aircol SR 68 compressor oil offers the following specific benefits:
    Extended service intervals.
    Reduced maintenance.
    Extended drain periods.
    Cleaner operation.
    Reduced friction.

    Page 1 of 2
    Typical Characteristics
    Name Method Units Aircol SR 68

    Density @ 15°C, Relative ASTM D4052 g/ml 0.839

    Viscosity, Kinematic 40°C ASTM D445 mm²/s 68

    Viscosity, Kinematic 100°C ASTM D445 mm²/s 10.7

    Foam Sequence I, Tendency ASTM D892 ml 10

    Foam Sequence I, Stability ASTM D892 ml 0

    Demulsification 54°C, mins to 40/37/3 ASTM D1401 minutes 15

    Viscosity Index ASTM D2270 - 142

    Pour Point ASTM D97 °C -54

    Rust Test, Procedure B ASTM D665 - Pass

    Rotating bomb ASTM D2272 minutes 3000

    Air Release Mins to 0.2%v @ 50°C IP 313 minutes 2

    Acid Number, Total (Potentiometric) ASTM D664 mg KOH/g 0.1

    Copper Corrosion, 3hrs @ 100°C ASTM D130 - 1B

    FZG Gear Test ( A/8.3/90 ) DIN 51354 FLS 9

    Flash Point, PMCC ASTM D93 °C 235

    The above figures are typical of those obtained with normal production tolerance and do not constitute a specification.

    Storage
    All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to
    avoid the possible ingress of water and the obliteration of drum markings.
    Products should not be stored above 60°C, exposed to hot sun or freezing conditions.

    Aircol SR 68
    16 Aug 2012
    Castrol, the Castrol logo and related marks are trademarks of Castrol Limited, used under licence.

    This data sheet and the information it contains is believed to be accurate as of the date of printing. However, no warranty or representation, express or implied, is
    made as to its accuracy or completeness. Data provided is based on standard tests under laboratory conditions and is given as a guide only. Users are advised
    to ensure that they refer to the latest version of this data sheet. It is the responsibility of the user to evaluate and use products safely, to assess suitability for the
    intended application and to comply with all applicable laws and regulations. Material Safety Data Sheets are available for all our products and should be
    consulted for appropriate information regarding storage, safe handling, and disposal of the product. No responsibility is taken by either BP plc or its subsidiaries
    for any damage or injury resulting from abnormal use of the material, from any failure to adhere to recommendations, or from hazards inherent in the nature of the
    material. All products, services and information supplied are provided under our standard conditions of sale. You should consult our local representative if you
    require any further information.

    Castrol Marine, Technology Centre, Whitchurch Hill, Pangbourne, Reading RG8 7QR, United Kingdom

    www.castrolmarine.com

    Page 2 of 2

    You might also like