Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

StorageTek SL150 Modular Tape Libraries Installation (IDO) Specialist Assessment

Download as pdf or txt
Download as pdf or txt
You are on page 1of 13

Prueba: StorageTek SL150 Modular Tape Libraries Installation (IDO) Specialist Assessment

Revise las respuestas, los resultados y las puntuaciones de las preguntas que se muestran a continuación.
Las respuestas correctas están marcadas con un asterisco (*).

This 45 - question assessment test is the final component of the StorageTek SL150 Modular Tape
Library Installation (IDO) Specialist guided learning path. This assessment will allow you to test your
knowledge level of the information learned from the Installation (IDO) courses. Passing with a >80%
score from this assessment makes you eligible to become an Oracle Installation (IDO) Specialist for this
subject matter.

ESD
(Responder todas las preguntas de esta sección)

1. The leading cause of semiconductor failure is due to?


Marcar para Revisión
(1) Puntos

The increased use of 45nm technology in manufacturing


semiconductors
Damage during shipments
Incorrect power supply used with the system
Electrostatic discharge (*)

Correct

2. Which of the following descriptions best defines ESD?


Marcar para Revisión
(1) Puntos

The sudden transfer, or discharge, of electricity from one object to


another. (*)
The failure of an item that would result in failure of the system.
Damage to system components due to the use of an incorrect
power supply
The ability of a part to withstand a static charge without failure.

Correct

3. Low humidity environments reduce the voltage generated from friction


and moving, Marcar para Revisión
(1) Puntos

Verdadero
Falso (*)

Correct

4. Standing up can generate up to 1,400 volts.


Marcar para Revisión
(1) Puntos
Verdadero (*)
Falso

Correct

5. Why are ESD "soft failures" the most serious type of failures?
Marcar para Revisión
(1) Puntos

The damage is not immediately noticed or detected (*)


They represent 60% of failures
They represent 40% of all failures
The damage is immediate and easily detected

Correct

Página 1 de 9 Siguiente Resumen

6. EIS
consists of Marcar para Revisión
how many (1) Puntos
standards?

5
6 (*)
4
3

Correct

7. True or False? The EIS Methodololgy can be applied to other


post-installation activities such as a Solaris OS upgrade. Marcar para Revisión
(1) Puntos

Verdadero (*)
Falso

Correct

8. During the EIS Compliance Sign Off step:


Marcar para Revisión
(1) Puntos

Obtain project signoff and handover of project


documentation
Perform the system tests as defined.
Create customer documentation and hand over for signoff.
(*)
Follow the additional steps through PS or Partners. In
WINGS, this depends on the availablility of templates
reflecting these services.

Correct

9. True or False? The acclimatization standard helps installer


successfully introduce new Sun servers and storage to a Marcar para Revisión
customer's data center. (1) Puntos

Verdadero (*)
Falso

Correct

10. True or False? The EIS methodology guarantees identical


installations on all systems world-wide. Marcar para Revisión
(1) Puntos

Verdadero
Falso (*)

Correct

Anterior Página 2 de 9 Siguiente Resumen


11. Planning is
a very Marcar para Revisión
important (1) Puntos
phase of a
successful
installation
and helps
determine,
and
confirm,
the
deliverables
with the
customer.
What tool
is used for
this type of
work?

CapacityTOOL
INSTALLplan
EISplan
WINGS (*)

Correct
12. EIS-DVD: (Select all that apply)
Marcar para Revisión
(1) Puntos

Includes patches for Sun software required in most


installations
Includes scripts to carry out standard settings and to
unpack and install the patches
Includes programs and tools, such as explorer and Griffon
Enables the systems to be installed consistently and
without need for internet connectivity
All of the above (*)

Correct

13. How do you identify a system that has been installed using
EIS? (Select all that apply) Marcar para Revisión
(1) Puntos

(Seleccione todas las respuestas correctas)

The EIS-DVD ejects from the DVD reader.


the file /var/sun/EIS-CD.log is populated when running
the setup-standard script and the patch installation
scripts. (*)
The system boots without error.
The results from Griffon should be clean. (*)

Incorrect. Refer to the Using


EIS Methodology training for
more information.

14. Where are the major changes between EIS-DVD revisions


found? (Select all that apply() Marcar para Revisión
(1) Puntos

(Seleccione todas las respuestas correctas)

On the EIS web site (*)


In the history .txt file on the DVD (*)
In the changes.txt file on the DVD
None of the above

Correct

15. The grounding standard states that:


Marcar para Revisión
(1) Puntos

All server installations are to be properly grounded


according to the methods described in the appropriate
Sun hardware documentation. (*)
A clean data center environment must be maintained:
systems should be unpacked outside of the data center,
and then moved into the center.
A system should not experience a maximum positive or
negative temperature gradient of more than 2 degrees
Celsiuls or 4 degrees Farenheit per hour.
Processes are in place to ensure that equipment is not
damaged due to improper handling or climage changes
between transportation and the final destination.

Correct

Anterior Página 3 de 9 Siguiente Resumen


16. Global
EIS Web Marcar para Revisión
contains: (1) Puntos

Patches and SunSolve information


Information, links, downloads, detailed training, and success
stories (*)
Sun System Handbook links and links to
heep://docs.sun.com
All of the above

Correct

17. How often is the EIS-DVD released?


Marcar para Revisión
(1) Puntos

Once a year
Once a quarter
Once a month (*)
Twice a month

Correct

18. True or False? Enterprise installation Standards (EIS) is a


methodology that ensures consistent, high-quality, cost-effective Marcar para Revisión
Sun systems and storage installations for Sun customers. (1) Puntos

Verdadero (*)
Falso

Correct

19. The EIS Methodology is a set of standards, processes, tools, and


documentation that helps an installation team perform Marcar para Revisión
installations of Sun equipment in a consistent manner and (1) Puntos
provides them with a set of installation best practices for
perfoming what particular installations?

Currently concentrating on Solaris for Sun storage only


Currently concentraing on Solaris for SPARC platform,
Solaris for x86 platform servers, and Sun storage (*)
Currently concentrating on Solaris for SPARC platfor only
Currently concentratin on Solaris for Solaris for x86 platform
servers only.

Correct

20. True or False? EIS is an optional service for installations carried


out by Sun staff and their installation partners. Marcar para Revisión
(1) Puntos

Verdadero
Falso (*)

Correct

Anterior Página 4 de 9 Siguiente Resumen

21. The EIS


cabling Marcar para Revisión
standard (1) Puntos
states
that:

Cable labels consist of two lines of text, each containing up


to five fields.
Cables must be labeled at both ends (identically).
All of the ablve (*)
A customer's existing cable labeling scheme can be used if it
meets the EIS requirements.
The fields designate the cabinet, insertion point, board, slot,
and port.

Correct

22. During the System Specification and Test Definitions step:


Marcar para Revisión
(1) Puntos

Ensure that explorer (with the instinfo option) has been run
and the explorer data file has been uploaded to the correct
configDB.
Make sure the project can range from a single server
installation to a complex international configuration involving
multiple sites, servers, storage, and services.
Create customer documentation and hand over for signoff.
Define details such as host names, IP addresses, and boot
disk layout for the new systems. Furthermore, the testes
that will be performed during customer handover are
defined. (*)

Correct
23. During the Project Initiation step:
Marcar para Revisión
(1) Puntos

Customer details, the installation team, Radiance case


numbers, and order number (as appropriate) are
documented.
A project can range from a single server installation to a
complex internation configuration involving multiple sites,
servers, storage, and services. (*)
The purpose is to define details such as hostnames, IP
addresses, and boot disk layout for the new systems.
Furthermore , the test that will be performed during
customer handover are defined.
You ensure that explorer (with the instinfo option) has been
run and the explorer data file has been uploaded in the
correct configDB.

Correct

24. True or False? EIS is a living process and is constantly being


updated to keep abreast of our products and latest knowledge. Marcar para Revisión
(1) Puntos

Verdadero (*)
Falso

Correct

25. EIS technical installation checklists are available for:


Marcar para Revisión
(1) Puntos

Servers, Storage, Appliances


Servers, Workstations, Software items

Workstations, Servers, Storage


Servers, Storage, Software items (*)

Incorrect. Refer to the Using EIS


Methodology training for more
information.

Anterior Página 5 de 9 Siguiente Resumen


26. What
type of Marcar para Revisión
traffic (1) Puntos
goes
across
the TTI
interface?

SCSI commands
Tape alerts
Library commands (*)
SNMP traps

Correct

27. After a tape drive has powered up and IPL'ed what occurs next?
Marcar para Revisión
(1) Puntos

The library does initial drive configuration (*)


The drive requests status from the library
The library loads a cleaning cartridge
The library writes an even log

Correct

28. On the SL8500 Library Console, the code version displayed on


the System details page for each drive has a slash (/) followed Marcar para Revisión
by some digits that indicate which of the following? (1) Puntos

The fault symptom code


The install date
The version of the TTI code in that drive (*)
The tape expiration date

Correct

29. Which of the following tapes would not automatically be


rewound and unloaded at the end of the operation? Marcar para Revisión
(1) Puntos

Dump cartridges
Code tape cartridges
Data tapes (*)
Cleaning cartridges

Incorrect. Please refer to the


“Sun StorageTek Tape Transport
Interface Fundamentals” course
for more information.

30. The TTI Interface contains what components?


Marcar para Revisión
(1) Puntos

Library management software, cabling, tape drive, library


Twisted pair cables, connectors, library, tape drive (*)
Backup software, cabling, tape drive, library
Host software, cabling, tape drive, library

Correct

Anterior Página 6 de 9 Siguiente Resumen

31. True or
False - Marcar para Revisión
Refer to the (10) Puntos
StorageTek
SL150
Modular
Tape
Library
System
Customer
Replaceable
Unit Guide
for detailed
instructions
on
replacing
SL150
FRUs.

Verdadero
Falso (*)

Correct!

32. You can add up to ____ 2U modules to expand cartridge


capacity and increase the number of available tape drives. Marcar para Revisión
(10) Puntos

three
two
nine (*)
four

Correct!

33. The SL150 is being released as a replacement for the?


Marcar para Revisión
(10) Puntos

(Seleccione todas las respuestas correctas)

SL24/48 (*)
SL3000
SL500 (*)
SL700

Correct!

34. The SL150 remote browser graphical user interface can be


used to configure the following tasks: Marcar para Revisión
(10) Puntos

Creating Additional User Accounts


Partitioning
Configuring Tape Drives
Configuring Drive Cleaning Operations
All of the above (*)

Correct!

35. True or False - The SL150 should be powered on using the


Browser Graphical User interface. Marcar para Revisión
(10) Puntos

Verdadero
Falso (*)

Correct!

Anterior Página 7 de 9 Siguiente Resumen


36. The
HP Marcar para Revisión
Library (10) Puntos
and
Tape
Tool
(LTT)
diag
tool
will
allow
you
to:

Retrieve Support Dumps from a tape drive


Upgrade the firmware on a tape drive
Run diagnostics/health checks on a tape drive
All of the above (*)

Correct!

37. True or False - The SL150 supports encryption.


Marcar para Revisión
(10) Puntos
Verdadero (*)
Falso

Correct!

38. The base model of the SL-150 features how many USB ports?
Marcar para Revisión
(10) Puntos

9 (*)
8
6
7

Correct!

39. The SL150 supports the following drives:


Marcar para Revisión
(10) Puntos

LTO4 and LTO5


LTO4
T10K C
LTO5 (*)

Correct!

40. Basic library initialization performed from the touch screen of the
SL150 front control panel involves the following tasks: Marcar para Revisión
(10) Puntos

(Seleccione todas las respuestas correctas)

Configuring the library network interface (*)


Setting the date and time for the library (*)
Creating a partition
Changing the default administrator password (*)

Correct!

Anterior Página 8 de 9 Siguiente Resumen

41. The main


approaches Marcar para Revisión
to (10) Puntos
monitoring
the health
and
operations
of the
StorageTek
SL150
Modular
Tape
Library
System
are:

(Seleccione todas las respuestas correctas)

Reading the event log


Monitoring the Library from the User Interface (*)
Reviewing SL150healthstatus.log
Using Simple Network Management Protocol (SNMP) (*)
All of the above

Correct!

42. True or False - The SL150 features new robotics.


Marcar para Revisión
(10) Puntos

Verdadero (*)
Falso

Correct!

43. Which of the following are hot-swappable components for the


SL-150? Marcar para Revisión
(10) Puntos

(Seleccione todas las respuestas correctas)

Magazines
LTO Drives (*)
Operator Panel
Power Supplies (*)

Correct!

44. True or False - The SL150 does not have a license.


Marcar para Revisión
(10) Puntos

Verdadero (*)
Falso
Correct!

45. The initial SL150 touch screen default password is:


Marcar para Revisión
(10) Puntos

changeme
password
passw0rd (*)
null

Correct!

You might also like