Application

Selection Product Information

of Hydraulic Hydraulic & Pneumatic Seals
ISO-9001
ISO/TS-16949

and Pneumatic Seals

Sealing elements are vital in the hydraulic and pneumatic Pressure
equipment. Their use is critical and they provide a way for Temperature

the fluid power to be changed into liner motion. However,

seal failure can be detrimental to the equipment, and so it Media NAK HYDRAULIC & PNEUMATIC RANGE
Size
is important to have the right seals installed. Selection of OF SEALS includes Piston Seals, Rod Seals,
proper hydraulic and pneumatic seals is depending on the Wiper Seals, Wear Rings, etc. Rubber,
following factors: Linear Polyurethane, PTFE, Nylon and other materials
Velocity Application
Application-Hydraulic or pneumatic; piston or rod; are used to create a variety of seals to work
surface conditions of shaft and housing bore; for use under different hydraulic and pneumatic
under dry running, lubrication, or without lubrication. conditions. Most of these seals are designed
Size-Shaft outer diameter (seal inner diameter); bore diameter (seal outer diameter); axial for the reciprocating motion used commonly
cross section and radial cross section. in hydraulic and pneumatic applications such
Temperature-Fluid temperature and operating temperature. Both average and peak as cylinders. To meet the critical requirements
temperatures should be taken into consideration. of the hydraulic and pneumatic equipment
Pressure-Static as well as dynamic pressure industries, NAK offers a wide range of designs.
should be noticed. Maximum operating
Disclaimer
1. NAK product is prohibited to use, install or apply in or on
pressure is also an important parameter.
any aerospace related instrument and equipment. Linear Velocity-Number of cylinder strokes,
2. NAK has no liability under any express or implied Warranty maximum speed, etc.
if NAK Product:
Media / Fluid-Type of media, its volume, etc.
œ is modified or tampered;
œ is misused, abused or misapplied;
œ is used in a critical environment or specific equipment
without NAK prior written acknowledgement;
œ is not used in accordance with the printed user instruction
materials
œ is damaged owing to natural deterioration, decomposition
or transformation of chemical structure
3. If NAK's product to be applied in critical environment or
specific equipment, it is only allowed to launch into mass
production when the sample has been passed the testing
conducted by the user.

NAK Sealing Technologies Corporation

Address: No. 336, Industrial Rd., Nankang Industrial Zone, Nantou, Taiwan
Tel: +886-(0)49-2255011 Fax: +886-(0)49-2250035 Web: www.nak.com.tw
AC Design-04-27071159

ISO9001/TS16949 Company

N a v i g a t o r o f S e a l i n g Te c h n o l o g y
Related data, graphs, drawings, figures, statistics, estimates, and any technical information on this document are for reference only and should not be taken as confirmed specifications PI200711HP-01
Product Description Technical Information
Sealing Products for Hydraulic and Sealing Design for the Hydraulic &
Pneumatic Cylinder Applications Pneumatic Applications
For Hydraulic and
For the hydraulic and pneumatic equipment, the cylinder design is getting more and more high-tech
Pneumatic Seals, NAK provides various types and designs for customer selection.
and complex. As a result, for the cylinder application, a variety of different seals are required, and the
seals need to offer long service life and reliability. Sealing elements are critical components for the
hydraulic and pneumatic cylinder. Their main function is to prevent the cylinder fluid or gas from escaping, NAK Rod & Piston Seal
so that to ensure the normal functioning of the cylinder whether in a pressurized or un-pressurized state.

Function of Cylinder Seals

UNP UNR HB HBX

Wiper Seal To prevent external contaminants from entering the system
Rod Seal Installed and fixed on the cylinder bore to seal against the rod
Piston Seal Installed and fixed on the piston groove to seal against the cylinder
Wear Ring To prevent metal-to-metal contact
UIP UIP2 LIP CIP

Rod Seal (UIP)

Wear Ring
Wiper Seal (WP1)
UOP COP LOP
Piston Seal (UOP)

NAK Wiper Seal

WP1 WP2 WP3 WP4

WP5 WP10 WP21 WP22

For more information of type selection and details, please contact us.
Product Description Technical Information
Sealing Products for Hydraulic and Sealing Design for the Hydraulic &
Pneumatic Cylinder Applications Pneumatic Applications
For Hydraulic and
For the hydraulic and pneumatic equipment, the cylinder design is getting more and more high-tech
Pneumatic Seals, NAK provides various types and designs for customer selection.
and complex. As a result, for the cylinder application, a variety of different seals are required, and the
seals need to offer long service life and reliability. Sealing elements are critical components for the
hydraulic and pneumatic cylinder. Their main function is to prevent the cylinder fluid or gas from escaping, NAK Rod & Piston Seal
so that to ensure the normal functioning of the cylinder whether in a pressurized or un-pressurized state.

Function of Cylinder Seals

UNP UNR HB HBX

Wiper Seal To prevent external contaminants from entering the system
Rod Seal Installed and fixed on the cylinder bore to seal against the rod
Piston Seal Installed and fixed on the piston groove to seal against the cylinder
Wear Ring To prevent metal-to-metal contact
UIP UIP2 LIP CIP

Rod Seal (UIP)

Wear Ring
Wiper Seal (WP1)
UOP COP LOP
Piston Seal (UOP)

NAK Wiper Seal

WP1 WP2 WP3 WP4

WP5 WP10 WP21 WP22

For more information of type selection and details, please contact us.
 Application

Selection Product Information

of Hydraulic Hydraulic & Pneumatic Seals
ISO-9001
ISO/TS-16949

and Pneumatic Seals

Sealing elements are vital in the hydraulic and pneumatic Pressure
equipment. Their use is critical and they provide a way for Temperature

the fluid power to be changed into liner motion. However,

seal failure can be detrimental to the equipment, and so it Media NAK HYDRAULIC & PNEUMATIC RANGE
Size
is important to have the right seals installed. Selection of OF SEALS includes Piston Seals, Rod Seals,
proper hydraulic and pneumatic seals is depending on the Wiper Seals, Wear Rings, etc. Rubber,
following factors: Linear Polyurethane, PTFE, Nylon and other materials
Velocity Application
Application-Hydraulic or pneumatic; piston or rod; are used to create a variety of seals to work
surface conditions of shaft and housing bore; for use under different hydraulic and pneumatic
under dry running, lubrication, or without lubrication. conditions. Most of these seals are designed
Size-Shaft outer diameter (seal inner diameter); bore diameter (seal outer diameter); axial for the reciprocating motion used commonly
cross section and radial cross section. in hydraulic and pneumatic applications such
Temperature-Fluid temperature and operating temperature. Both average and peak as cylinders. To meet the critical requirements
temperatures should be taken into consideration. of the hydraulic and pneumatic equipment
Pressure-Static as well as dynamic pressure industries, NAK offers a wide range of designs.
should be noticed. Maximum operating
Disclaimer
1. NAK product is prohibited to use, install or apply in or on
pressure is also an important parameter.
any aerospace related instrument and equipment. Linear Velocity-Number of cylinder strokes,
2. NAK has no liability under any express or implied Warranty maximum speed, etc.
if NAK Product:
Media / Fluid-Type of media, its volume, etc.
œ is modified or tampered;
œ is misused, abused or misapplied;
œ is used in a critical environment or specific equipment
without NAK prior written acknowledgement;
œ is not used in accordance with the printed user instruction
materials
œ is damaged owing to natural deterioration, decomposition
or transformation of chemical structure
3. If NAK's product to be applied in critical environment or
specific equipment, it is only allowed to launch into mass
production when the sample has been passed the testing
conducted by the user.

NAK Sealing Technologies Corporation

Address: No. 336, Industrial Rd., Nankang Industrial Zone, Nantou, Taiwan
Tel: +886-(0)49-2255011 Fax: +886-(0)49-2250035 Web: www.nak.com.tw
AC Design-04-27071159

ISO9001/TS16949 Company

N a v i g a t o r o f S e a l i n g Te c h n o l o g y
Related data, graphs, drawings, figures, statistics, estimates, and any technical information on this document are for reference only and should not be taken as confirmed specifications PI200711HP-01