Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 91 views

    Davit Eye Plate Design Calculation

    Uploaded by

    mechengg01
    This document provides design calculations for a pipe davit eye plate. It includes calculations to check for tension failure at the sides of the hole, crushing due to bearing above the pin, tearing tension failure at the plate edge, and shear failure as the pin attempts to plow toward the free edge of the plate. Key parameters of the eye plate design are specified, and calculations are shown to check that the allowable load is not exceeded based on the selected material and safety factor. The eye plate design is summarized as being safe based on the calculations against the specified failure modes.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Davit Eye Plate Design Calculation

    Uploaded by

    mechengg01
    91 views5 pages
    This document provides design calculations for a pipe davit eye plate. It includes calculations to check for tension failure at the sides of the hole, crushing due to bearing above the pin, tearing tension failure at the plate edge, and shear failure as the pin attempts to plow toward the free edge of the plate. Key parameters of the eye plate design are specified, and calculations are shown to check that the allowable load is not exceeded based on the selected material and safety factor. The eye plate design is summarized as being safe based on the calculations against the specified failure modes.

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides design calculations for a pipe davit eye plate. It includes calculations to check for tension failure at the sides of the hole, crushing due to bearing above the pin, tearing tension failure at the plate edge, and shear failure as the pin attempts to plow toward the free edge of the plate. Key parameters of the eye plate design are specified, and calculations are shown to check that the allowable load is not exceeded based on the selected material and safety factor. The eye plate design is summarized as being safe based on the calculations against the specified failure modes.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    91 views5 pages

    Davit Eye Plate Design Calculation

    Uploaded by

    mechengg01
    This document provides design calculations for a pipe davit eye plate. It includes calculations to check for tension failure at the sides of the hole, crushing due to bearing above the pin, tearing tension failure at the plate edge, and shear failure as the pin attempts to plow toward the free edge of the plate. Key parameters of the eye plate design are specified, and calculations are shown to check that the allowable load is not exceeded based on the selected material and safety factor. The eye plate design is summarized as being safe based on the calculations against the specified failure modes.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 5

    CLIENT : FW A/C IOCL (P)

    YAMUNA NAGAR
    INDIA EQPT. : DEISOBUTANIZER PAGE: 1

    Designed by: PZG JOB NO. DV-099 DR NO. DV-099D REV. 2

    DESIGN REPORT ( D R )

    TITLE : DESIGN OF PIPE DAVIT

    DESIGN REFERENCE PRESURE VESSEL DESIGN MANUAL BY DENNIS R. MOSS

    WORKS JOB NUMBER : DV-099

    NAME OF PROJECT : IOCL, PARADIP

    FOA NO. : PDRPLL1020 DTD. 21.12.09

    ITEM NUMBER : 024-C-0002

    SERVICE : DEISOBUTANIZER

    VENDOR DOC. REF. : ISGEC REF./ DOC. NO.


    2009-DV099-S1 R5
    2009-DV099-S2 R5
    2009-DV099-S17 R1

    2 31.10.2011 ( Sandeep Bhargava ) ( Peeyush Vaish )


    DESIGN ENGINEER HEAD DESIGN

    1 21.07.2011 ( Vakul Kakra ) ( Peeyush Vaish )


    DESIGN ENGINEER HEAD DESIGN

    0 28.12.2010 ( Shailendra Tiwari ) ( Peeyush Vaish )


    DESIGN ENGINEER HEAD DESIGN

    REV. DATE PREPARED BY APPROVED BY

    2318/1299
    CLIENT : FW A/C IOCL (P)
    YAMUNA NAGAR PAGE 2
    INDIA EQUIPMENT : DEISOBUTANIZER
    Designed by: PZG JOB NO. DV-099 REV. 2

    INDEX

    PAGE NO. DESCRIPTION R0 R1 R2 R3


    1 Cover Page 0 1 2
    2 Index 0 1 2
    3 Sketch 0 0 2
    4 Lifting davit design 0 1 2
    5 Design of davit support bracket 0 1 2
    6 Calculation of weights 0 1 2
    7 Calculation of section modulus 0 0 2
    8 Calculation of radial force & shell stresses 0 1 2
    9 Bracket Cleat Detail - - 2
    10 WRC of Pipe Davit 0 1 2
    19 Davit Eye Plate design Calculation - - 2

    PREPARED BY: Brijesh Vakul PZG

    APPROVED BY: Peeyush Peeyush PZP


    2319/1299
    CLIENT : FW A/C IOCL (P)
    YAMUNA NAGAR
    INDIA EQPT. : DEISOBUTANIZER PAGE: 1

    Designed by: PZG JOB NO. DV-099 DR NO. DV-099D REV. 2


    Davit Eye Plate Design Calculation
    Ref: David T. Ricker, "Design and Construction of Lifting Beams", Engineering Journal, 4th Quarter, 1991.
    R t
    `

    dp
    theta

    h
    aa aa
    o
    p
    f
    d
    r
    R = 185 mm
    r = 65 mm
    h= 280 mm
    d= 50 mm
    t= 25 mm
    f= 18 mm
    dp = 273 mm
    Capacity of pipe davit Pcap = 1000 kg
    = 9806.65 N
    Tension failure at the sides of the hole
    R−r = 25.38 °
    theta = Sin−1
    r
    ( )
    h = 71.94 mm aa aa
    op =
    Cos(theta )
    Least plate width at d = 46.94 mm
    side of hole
    a= op− Pu
    2
    Material of construction MOC = IS2062 Gr B
    Ultimate tensile strength Fu = 400 N/mm^2
    Ultimate tensile load Pu = 2 atF
    u
    = 938836.335 N
    Since "Pu" is a theoretical failure load, an appropriate factor of safety must be applied
    Factor of safety FS = 2
    Allowable load P
    =
    Pu
    FS
    = 469418.168 N
    SAFE
    CLIENT : FW A/C IOCL (P)
    YAMUNA NAGAR
    INDIA EQPT. : DEISOBUTANIZER PAGE: 2

    Designed by: PZG JOB NO. DV-099 DR NO. DV-099D REV. 2

    Crushing due to bearing above pin

    Local yielding and enlargement of the bearing contact area is anticipated as the load increased
    Yield strenth Fy = 248.2 N/mm^2
    Allowable bearing stress Fp = 0.9F
    = y223.38 N/mm^2
    Allowable crusing load Pp = Fp×t×d
    = 279225 N
    SAFE

    Tearing tension failure at the plate edge

    d
    0.8d
    P

    e
    e e

    Assumption: A block of steel 0.8d in length, e in height, and with a


    thickness the same as the lug plate performs as a fixed-end beam.
    P
    Maximum bending moment M = P×0 . 8 d pin
    8
    Section Modulus Z = t×e 2
    hole
    6
    Allowable bending stress of lug Fb = 0.66Fy
    = 163.812 N/mm^2
    Allowable load P = Pcap
    = 9806.65 N
    Required minimum emin =
    P×d

    =
    √ 1 . 67×Fb×t
    8.467 mm
    Provided eactual = d
    r−
    2
    = 40 mm
    SAFE

    Shear failure in the lug plate as the pin attempts to plow its way toward the free edge of the plate
    Allowable shear stress of lug Fs =
    =
    0 . 4 Fy
    99.28 N/mm^2
    Shear resisting area As = 2×e×t
    = 2000 mm^2
    Allowable shear load Pu = Fs× As
    = 198560 N SAFE
    CLIENT : FW A/C IOCL (P)
    YAMUNA NAGAR
    INDIA EQPT. : DEISOBUTANIZER PAGE: 3

    Designed by: PZG JOB NO. DV-099 DR NO. DV-099D REV. 2

    Circular fillet weld subjected to shear


    Allowae shear stree of weld Fs weld = 0.4 Fy
    = 99.28
    Throat thickness t throat = 0.707×f N/mm^2
    = 12.726 mm
    Shear resisting area As weld = π ×d ×t
    p throat
    = 10914.5149 mm^2
    = Fs
    weld × As weld
    Allowable shear load Pu weld
    = 1083593 N
    SAFE

    You might also like