ST 2000
ST 2000
ST 2000
ST-2000
AC/DC Ammeter & Voltmeter are moving coil or Rectifier instrument.
Name Range No. Name Range No.
20/100mA 1301 50/100uA 1403
50/100mA 1302 100/500uA 1404
100/500mA 1303 2 Ranges 500/1000uA 1405
0.2/1A 1304 10/50mA 1406
2 Ranges
0.5/1A 1305 50/100mA 1407
1/5A 1306 10/30/100mA 1409
2/10A 1307 0.1/0.3/1A 1410
5/25A 1308 DC 3 Ranges
AC Ammeter 1/3/10A 1411
20/100/500mA 1310 3/10/30A 1412
Ammeter 0.2/0.5/1A 1312 0.1/0.3/1/3mA 1414
3 Ranges 0.5/1/2A 1313 1/3/10/30mA 1415
2/5/10A 1314 10/30/100/300mA 1416
5/10/20A 1315 4 Ranges
0.1/0.3/1/3A 1417
20/50/100/200mA 1316 1/3/10/30A 1418
0.1/0.2/0.5/1A 1317 30/100/300/1000mA 1419
4 Ranges
0.5/1/2/5A 1318 1 Range 50mV 1601
2/5/10/20A 1319
5/10V 1602
15/30V 1501 1/3V 1603
30/75V 1502 10/30V 1604
2 Ranges 75/150V 1503 2 Ranges
30/100V 1605
AC 150/300V 1504 100/300V 1607
Voltmeter 300/750V 1505 300/1000V 1608
75/150/300V 1506 DC 0.3/1/3V 1609
3 Ranges 150/300/600V 1507 Voltmeter 1/3/10V 1610
3 Ranges
150/300/750V 1508 3/10/30V 1611
30/100/300V 1612
Principle: Moving coil type 0.3/1/3/10V 1613
Accuracy: ±0.5% of F.S. 3/10/30/100V 1614
1/3/10/30V 1615
Scale Length: Approx. 135mm(5-3/8") 4 Ranges
10/30/100/300V 1616
Weight: Approx. 1.7kg 30/100/300/1000V 1617
0.2/2/20/2000V 1618
Dimension: 196(L)x170(W)x87(D)(mm)
Case Material: Bakelite with glass window
Special Ranges Are Available Upon Request.
Portable Frequency Meter
The Hz meters uses a frequency-to-DC current transducer
which drives a high sensitivity moving coil type indicator. It
features accurate frequency measurements without
noticeable influence of line voltage fluctuation (50 to 300V)
or waveform distortion.
Principle: Frequency sensing transducer
Accuracy: 0.5% of full scale value on 45 to 65 Hz range
±1.0% of full scale value on 20 to 100Hz range
±0.5% of full scale value on 100 to 500Hz range
Scale Length: Approx. 135mm(5-3/8”)
Case material: Bakelite with glass window
Name Frequency Voltage No.
45-65Hz 120/240V 1701
Hz
0-100Hz 120/240V 1702
meter
0-500Hz 120/240V 1703
Portable Wattmeter
The wattmeter is an electrodynamometer type. This instrument
is highly reliable, and designed for use in laboratories or
factories for precision measurement of power at AC and
commercial frequencies up to 1000Hz.
Principle: Electrodynamometer type
Accuracy: ±0.5% of full scale
Scale Length: Approx. 135mm(5-3/8")
Scale Divisions: 120
Frequency Ranges: AC 25 to 1000Hz (COSØ=1.0) (suitable for DC)
AC 25 to 500Hz (COSØ=0.2)
Range
Name Power Factor No.
Current Voltage
0.2/1A 120/240V 1.0 2101
1/5A 120/240V 1.0 2102
Single-Phase
2/10A 120/240V 1.0 2103
Wattmeter
5/25A 120/240V 1.0 2104
1/2.5A 120/240V 1.0 2105