Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Hapter: Parental Control

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

C HAPTER 16

Parental Control

16.1 Overview
Parental control allows you to block web sites with the specific URL. You can also define time
periods and days during which the AMG1302-T11C performs parental control on a specific user.

16.2 The Parental Control Screen


Use this screen to enable parental control, view the parental control rules and schedules.

Click Security > Parental Control to open the following screen.

Figure 94 Security > Parental Control

The following table describes the fields in this screen.

Table 69 Security > Parental Control


LABEL DESCRIPTION
Parental Control Use this field to activate or deactivate parental control.
Add new PCP Click this to create a new parental control rule.
# This is the index number of the rule.
Status This indicates whether the rule is active or not.

A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not
active.
PCP Name This shows the name of the rule.
Home Network User This shows the MAC address of the LAN user’s computer to which this rule applies.
Internet Access This shows the day(s) and time on which parental control is enabled.
Schedule
Network Service This shows whether the network service is configured. If not, None will be shown.

AMG1302-T11C User’s Guide

181
Chapter 16 Parental Control

Table 69 Security > Parental Control (continued)


LABEL DESCRIPTION
Website Blocked This shows whether the website block is configured. If not, None will be shown.
Modify Click the Edit icon to go to the screen where you can edit the rule.

Click the Delete icon to remove an existing rule.


Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.

16.2.1 Add/Edit Parental Control Rule


Click Add new PCP in the Parental Control screen to add a new rule or click the Edit icon next to
an existing rule to edit it. Use this screen to configure a restricted access schedule and/or URL
filtering settings to block the users on your network from accessing certain web sites.

Figure 95 Add/Edit Parental Control Rule

The following table describes the fields in this screen.

Table 70 Parental Control: Add/Edit


LABEL DESCRIPTION
General
Active Select the checkbox to activate this parental control rule.

AMG1302-T11C User’s Guide

182
Chapter 16 Parental Control

Table 70 Parental Control: Add/Edit (continued)


LABEL DESCRIPTION
Parental Control Enter a descriptive name for the rule.
Profile Name
Home Network User Select the LAN user that you want to apply this rule to from the drop-down list box. If
you select Custom, enter the LAN user’s MAC address. If you select All, the rule
applies to all LAN users.
Internet Access Schedule
Day Select check boxes for the days that you want the AMG1302-T11C to perform parental
control.
Time of Day to Apply
Start Time Enter the starting and ending time that the LAN user is allowed access.

End Time
Network Service
Network Service If you select Block, the AMG1302-T11C prohibits the users from viewing the Web sites
Setting with the URLs listed below.

If you select Access, the AMG1302-T11C blocks access to all URLs except ones listed
below.
Add new service Click this to show a screen in which you can add a new service rule. You can configure
the Service Name, Protocol, and Name of the new rule.
Active This shows whether a configured service is activated or not.
Service Name This shows the name of the rule.
Protocol This shows the protocol of the rule.
Port This shows the port of the rule.
Modify Click the Edit icon to go to the screen where you can edit the rule.

Click the Delete icon to remove an existing rule.


Blocked Site/URL Enter the URL of web sites or URL keywords to which the AMG1302-T11C blocks
access.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.

AMG1302-T11C User’s Guide

183

You might also like