Fosroc Structuro W450: Constructive Solutions
Fosroc Structuro W450: Constructive Solutions
Fosroc Structuro W450: Constructive Solutions
Uses
Structuro W450 is higher-range high performance hyper- Structuro W450 combines the properties of water reduction
plasticizer to product rheoplastic concrete with higher water and workability retention. It allows the production of high
reduction intended for applications where increased early performance concrete and/or concrete with high workability.
and ultimate compressive strengths are required, and it has
Structuro W450 is a particularly strong hyperplasticiser
been developed for use in:
allowing production of consistent concrete properties around
Self compacting concrete the required dosage.
Pumped concrete
Technical support
Concrete requiring long workability retention
High performance concrete Fosroc provides a technical advisory service for on-site as-
sistance and advice on admixture selection, evaluation trials
Pre-cast concrete
and dispensing equipment. Technical data and guidance can
be provided for admixtures and other products for use with
Advantages
fresh and hardened concrete.
Increased early and ultimate compressive strengths
Typical Properties
Increased flexural strength
Improved adhesion to reinforcing and stressing steel Appearance : dark yellowish brown coloured
liquid
Improved resistance to carbonation
Specific gravity : 1.10 @ 25°C
Lower permeability Chloride content : Nil to BS 5075 / BS:EN934
Increased resistance to aggressive atmospheric
Dosage Guidelines
conditions
The optimum dosage of Structuro W450 to meet specific
Reduced shrinkage and creep
requirements should always be determined by trials using
Increased durability the materials and conditions that will be experienced in use.
Normal dosage range is between 0.2 to 3.0% by weight of
Standards compliance cement or cementitious materials including PFA, GGBFS &
Structuro W450 conforms with BS 5075, BS:EN 934-2 and microsilica.
with ASTM C494 as Type F and G depending on dosage Use at other dosages
used.
Dosages outside the above dosage guidelines can be used
Description to meet particular concrete mix requirements. Please con-
tact Fosroc for advice in such cases.
Structuro W450 is differentiated from conventional super-
plasticisers in that it is based on a unique carboxylic ether Effects of overdosing
polymer with long lateral chains. This greatly improves ce- Overdosage may cause delay in the setting time.
ment dispersion. At the start of the mixing process an elec-
trocstatic dispersion occurs but the presence of the lateral
chains, linked to the polymer backbone, generate a steric
hindrance which stabilises the cement particle’s capacity to
separate and disperse. This mechanism considerably reduc-
es the water demand in flowable concrete.
Structuro W450
Fosroc Structuro W450
Structuro W450 is suitable for use with all types of Portland Precautions
cements and cement replacement materials such as PFA,
Health and safety
GGBFS, SRC and microsilica.
Structuro W450 does not fall into the hazard classifications
Mixing
of current regulations. However, it should not be swallowed
When used at the mixing plant, Structuro W450 should be or allowed to come into contact with skin and eyes.
added in the mixing water. Suitable protective gloves and goggles should be worn.
In some instances, e.g. addition to ready mix concrete on Splashes on the skin should be removed with water. In case
site, Structuro W450 can be added directly in the truck mixer of contact with eyes rinse immediately with plenty of water
and mixed at maximum speed for an extra 5 minutes. and seek medical advice. If swallowed seek medical atten-
For high flow Self compacting concrete, Auramix V200 can tion immediately - do not induce vomiting.
be used at a dosage between 0.5 to 1.5 Litres per cubic For further information consult the Material Safety Data
meter. Sheet available for this product.
Dispensing Fire
The correct quantity of Structuro W450 should be measured Structuro W450 is water based and non-flammable.
by means of a recommended dispenser. The admixture
should then be added to the concrete with the mixing water Cleaning and disposal
to obtain the best results. Contact Fosroc for advice regard- Spillages of Structuro W450 should be absorbed onto sand,
ing suitable equipment and its installation. earth or vermiculite and transferred to suitable containers.
Remnants should be hosed down with large quantities of
Estimating water.
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for the Supply of
Goods and Service. All Fosroc datasheets are updated on a regular basis. It is the user’s responsibility to obtain the latest version.
Head Office
telephone: (+9714) 2039699 fax: (+9714) 2859649 email: agf@fosroc.com
Al Gurg Fosroc LLC
Regional offices
Post Box 657, Dubai Abu Dhabi, Al Gurg Fosroc telephone: 673 1779 fax: 673 1449 email: abudhabi@fosroc.com
Bahrain, YBA Kanoo telephone: 17738200 fax: 17732828 email: bahrain@fosroc.com
United Arab Emirates Kuwait, Boodai telephone: 4817618 fax: 4832124 email: kuwait@fosroc.com
Oman, Al Amana telephone: 24815080 fax: 24817554 email: oman@fosroc.com
www.fosroc.com Qatar, Tadmur telephone: 4665501 fax: 4664147 email: qatar@fosroc.com
UAE/0488/15/L