Roaming Profile

Creating a Roaming User Profile
Creating a roaming user profile is a two-step process. First you create a test user profile, and
then you copy the test user profile to a network server.
Create a Test Profile
To create a test profile for the roaming user, follow these steps:
1. Log on as Administrator.
2. Click Start, point to Administrative Tools, and then click Computer Management.
3. In the console tree, expand Local Users and Groups, and then click Users.
4. Right-click Users, and then click New User.
5. Type a name and password for the user.
6. Click to clear User must change password at next logon.
7. Click Create, and then click Close.
8. Quit the Computer Management snap-in.
9. Log off the computer.
10. Log on as the test user account that you created in step 7.
A user profile is automatically created on the local computer in the drive:\Documents and
Settings\username folder (where drive is the drive on which Windows is installed).
11. Configure the desktop environment, including appearance, shortcuts, and Start menu
options.
12. Log off, and then log on as Administrator.
Copy the Test Profile
To copy the test profile to a network server, follow these steps:
1. Create a folder on a network drive in which you can store network profiles. For example:
\\server_name\Profiles\user_name
2. Click Start, point to Control Panel, and then click System.
3. Click the Advanced tab, and then click Settings in the User Profiles section of the
System Properties dialog box.

4. Under Profiles Stored On This Computer, click the profile for the user that you created
in the "Create a Test Profile" section of this article, and then click Copy To.
5. In the Copy Profile To dialog box, type the network path to the folder.
6. Under Permitted to Use, click Change.
7. Type the name of the user account that you created in the "Create a Test Profile" section,
and then click OK.
8. Click OK three times.

9. Click Start, point to Administrative Tools, and then click Computer Management.
10. In the console tree, expand Local Users and Groups, and then double-click Users.
11. Double-click the user account that you created in the "Create a Test Profile" section.
12. Click the Profile tab. In the Profile path box, type the path to the network profile folder.
For example, type \\server_name\Profiles\user_name.
13. Click OK.

14. Quit the Computer Management snap-in.
NOTE: To make this profile mandatory, rename the Ntuser.dat file as Ntuser.man in the user's
profile folder.
MICROSOFT CERTIFIED SYSTEMS ENGINEER
NETWORK: A network is a collection of computers connected together.
.NETWORKING: is a process of communication between the interconnected
devices basically to share the network resources.
Benefits of Networking:
1. Share resources.
i) Data
ii) Hardware
2. Share S/W
3. Sharing of license
Network is a collection of computers connected together to get benefited from
networking.
Networking: Networking is a process of communication among systems.
Types of Networks:
1) Local Area Network (LAN): Systems connected within the same
geographical area is called LAN. A LAN can span 2 kilometers.
Components of LAN:
1. .NIC (Network Interface Card) 2. Cable – Co axial, cat5 or cat6 3. Hubs or Switches.
2) Metropolitan Area Networking: MAN is a combination of LANs or WANS
located and connected within the same city.
Components of MAN:
1. Router
2. Brouter (Brouter is a combination of bridge or router)
3. ATM Switches
4. DSL connectivity (DSL – Digital Subscriber Link) ex: Star cables
.
3) Wide Area Networking (WAN): Interconnection of LANs or MANs located within the
same geographical area or different area it depends on telecommunication services.
Components of WAN: Same as MAN:
MCSE
Networking devices:
Hubs, Switches, Routers and NICs.
HUB: Hub is a centralized device provides communication among systems when
we have more than 2 computers we need to have a device called hub to
interconnect.
Disadvantage of a Hub:
When we want to transfer some data from one system to another system.
If our network has 24 systems the data packet instead of being sent only to the destined
system it is being send to all the network participants. (i.e. 24 systems.) Hubs follow
broadcasting
SWITCH: It is an advanced version over a Hub.
The main benefit of switch is Unicast. Data packets are transmitted only to the
target computer instead of all.
Switch maintains a table called MIT (Mac Information Table.) which is generated as soon
as we turn on the switch, which acts like an index table and easy the process of finding
the networked system. MIT contains the port no, IP address and MAC address.
MAC: (Media Access Control): It is an address burnt in the NIC by the
manufacturer.
MAC address is of 48 bits in the farm of Hexa decimal.
Every NIC has its own unique MAC address.
MAC address determines the physical location of a system.
ROUTER: Router is a device connects two different networks.
Class A network with Class C network etc.
Routing is a process of communication between two different networks.
Network Topologies:
The way of cabling is called topology.
The architecture of a network is called topology
E.g.: Bus, Star, Ring, and Mesh Topologies.
Bus Topology:
Components of Bus Topology:
1. Co-axial cable (back bone cable)
2. T- connectors
3. BNC (British Network Connector)
4. Terminator
5. Patch cable
Disadvantages of Bus:
If anything goes wrong with backbone cable whole network is down.
Follows a serial communication.
Outdated these days.
Star Topology:
Star topology is an advanced version over bus topology. Where it uses either a
hub or a switch, it uses cat5/6 cables.
It uses connecters called (Recommend Jack) - RJ45
Star topology offers faster data transfer or processing.
Ring Topology:
Ring topology is useful when we want redundancy (fault tolerance) we go with
this type of topology.
Ring topology uses a device called MSAU. (Multi Station Access Unit)
It is a unit inside which a logical ring is formed. This ring ensures the availability
of Network. The availability of ring ensures availability of network.
It was basically implemented in IBM networks.
Logical Topologies: are two types
1. Work group.
2. Domain
Workgroup (peer to peer):
•
Collection of computers connected together to share the resources.
•
No servers are used.
•
Only Client OS is mostly used.
•
Any O/S like, DOS, 95, 98, workstation, win 2000 pro, and XP pro can
be configured as work-group model.
•
Suitable for smaller organizations.
•
Where security is not the criteria.
•
No administrator is required
•
Where we are not using client server based applications. Like oracle,
SQL and exchange etc.
Domain (Client/Server)
Domain is a collection of computers connected together with a server and users
Domain model can have servers like UNIX, Novell NetWare, WIN-NT server,
2000 server, and 2003 server.
Provides centralized administration.
Suitable for medium to large size networks/organizations.
Suitable when we have client server architecture (Back ends & front ends)
Domain offers security and provides logon authentication.
Suitable if security is criteria
Requires an administrator.
The History of MS Network O/S:
1. Desktop O.S.: DOS, 95, WKS, 98, 2k Prof., XP-Prof.
2. Network O.S.: UNIX, Win NT server 4.0, Win 2000 server, Win 2003 server.
Win NT 3.1 – was introduced in 1993
Win NT5.0 was renamed as windows 2000 server.
.NET server was renamed as windows 2003 server
WINDOWS 2000
FAMILY
Professional (Client)
Standard Server
Advanced server
Data center server
WINDOWS 2003
FAMILY
Standard Server
Enterprise edition
Advanced server
Data center server
HARDWARE REQUIREMENTS
Windows 2003 Standard Edition:
RAM: Min:128 MB
Rec: 256 MB
Max. RAM 4 GB
Processor: Pentium 550 MHz
HDD free space 1.5GB
SMP: 4 processors
Windows 2003 Enterprise Editions:
RAM: Min:128 MB
Rec: 256 MB
Max. RAM 16 GB
Processor: Pentium 733MHz
SMP:16 processors
Windows 2003 Web Edition:
RAM: Min:128 MB
Rec: 256 MB
Max. RAM 2 GB
Processor: Pentium 550 MHz
Windows 2003 Data Center Edition:
RAM: Min: 1GB
Rec: 2GB
Max. RAM 64 GB
Processor: Pentium 733MHz
IP Addressing:
There are two versions of IPs
1. IP version 4: offers IPs up to 4.2 billion (32 bit size)
2. IP version 6: 128 bit size.
IP address is used for identifying the system and provides communication.
IP address is of 32 bits divided in four octets.
Each Octet is of 8 bits, separated by a (.) dot.
IP is a combination of Network ID & Host ID.
Uses subnet mask to differentiate Network ID with Host ID.
Subnet mask acts like a mask between Network ID & the Host ID.
Numbers range between 0-255.
Organizations responsible for assigning IPs to clients.
IANA: Internet Assign Naming Authority.
ICANN: Internet Corporation assigning for name Numbers.
IANA has classified IP addressing into classes.
Class A:
1-126(used in LAN/WAN)
Class B:
128 – 191(used in LAN/WAN)
Class C:
192 – 223(used in LAN/WAN)
Class D:
224 – 239 (used for multi casting)
Class E:
240 – 254 (used for experimentation & research)
Class Format
No of N/Ws
No of Hosts
Subnet mask Range
A
N.H.H.H
28-1126
224 –216.777.214
255.0.0.0
1 – 126
B
N.N.H.H
216-216.384
216 –265.534
255.255.0.0
128 - 191
C
N.N.N.H
224-32.097.152
28 –2254
255.255.255.0
192 – 223
D
MULTICAST
N/A
N/A
N/A
224 – 239
E
RESEARCH
N/A
N/A
N/A
240 - 254
Class A:The first octet is reserved for network ID.
The first bit of first octet is always (0).
Class B: The first two octets are reserved for Network IDs.
The first two bits of first octet are reserved as (10)
Class C: The first three octets are reserved as network portions.
The first three bits of first octet are reserved as (110)
Class D: Used for Multicasting.
The first four bits of first octet are reserved as (1110)
Class D: Used for Experimentation.
The first four bits of first octet are reserved as (1111)
The first bit of first octet is called as priority bit which determines the class of N/W
0.0.0.0. Are reserved as N/W ID.
255.255.255.255 is reserved as broadcast ID.
127.0.0.1 Is reserved as loop back ID
Implementing/Configuring TCP/IP.
On Desktop
Right click on my network places-properties
Double click local area network-Select properties
Click-Use the following ip address
Specify the address in the box
DNS also same as IP address.
Verifying:
Go to command prompt
Type” ping IP address”. (PING: Packet Internet Groper)
ACTIVE DIRECTORY
AD: Is a centralized database where it contains the information about the
objects like users, groups, computers, printers etc.
AD is a centralized hierarchical Directory Database.
AD is a searchable Database.
2003 O/S. when installed (gets installed as a stand alone server) to promoting to
D.C. We have to install A.D.
Domain Controller (D.C.)
A server where A.D. is installed is called D.C.
Functionality of A.D.:
Using A.D. we can organize, manage and control resources.
It provides single point of administration.
Purpose of A.D.:
1. Provides user logon authentication services.
2. To organize and manage user A/Cs, computers, groups and n/w
resources.
3. Enables authorized users to easily locate n/w resources.
Features of A.D.:
1. Fully integrated security system with the help of Kerberos.
2. Easy administration using group policy.
3. Scalable to any size n/w
4. Flexible (install/uninstall)
5. Extensible (modify the schema)
New features in 2003
6. Rename computer name & Domain names.
7. Cross –forest trust relationship.
8. Site-to-Site replication is faster.
Evolution of LDAP:
Earlier we had no database standard; hence TTU & ISO introduced X-500
LDAP (Light Weight Directory Access Protocol): It is an industry standard
directory access protocol used for querying and providing communication among
the objects in A.D.
It is directory access protocol.
It runs on the port no. 389.
DAP: It is based on OSI model.
LDAP: Is based on TCP/IP model
Installing A.D:
Requirements:
Windows 2003 O.S.
A static IP
NTFS partition with 250 MB of free HDD space
DNS (Domain Naming System)
Step1: on 2003 machine
Start > Run> dcpromo>next>next
>Select domain controller for a new domain
>Domain in a new forest >next
>Specify the domain name (Ex: zoom.com)
>Net bios name (do nothing)>Next
>database>next
>Sysvol>next
>Select middle one>next
>Provide pwd>next
>Restart - when it prompts
After installing A.D.
Go to
Start>programs> administration tools
We should notice 5 options like ADUC, ADDT, ADSS, DCSP, and DSP
Safe removal of A.D.
>Start >run >dcpromo
Forceful removal of A.D
.>Start >run > dcpromo / forceremoval
Tools used for:
Active Directory Domains and Trusts:
Implementing trusts
Raising domain/forest functional levels
Adding user logon suffixes
Active Directory Sites and Services:
Configuring intrasite/intersite replication
Configuring global catalog
Creation of sites, site links, subnets.
Scheduling replication
Active Directory Users and Computers:
Managing users/groups
Managing computers.
Managing OUs
Managing Group Policy (Domain Level)
Managing Operations masters.
Raising domain functional level.
Domain controller security policy:
Set account, audit and password policies
Set user rights
Permissions or policies Pertains only to the DC where you set.
Domain security policy:
Set account, audit and password policies
Set user rights
Permissions or policies pertain to the DC as well as to all the domains
within.
Installing ADC (Additional Domain Controller):

Requirements:
D.C.
Static .P.
DNS
Stand-alone or Member Server.
Step1: on Stand alone machine or member server
Specify I.P.
Specify prefer DNS as servers IP.
Start > run >ping server’s IP.
Step2: >start >run >dcpromo>next>next>select ADC for an existing domain
Specify administrator’s name & pwd.
Domain name of DC (eg.zoom.com)
Browse the domain
Next>next> restore pwd.
ADC is a back up for DC
ADC maintains a back up copy of A.D., which will be in read only format.
ADCs provide fault tolerance & load balancing
There can be any no. of ADCs for a DC.
ADCs should be placed and maintained offsite away from the DC.
ADC maintains same domain name.
Verifying whether the server is configured as DC or ADC.
Start>run>cmd>net accounts
For DC we will find “primary”
For ADC we will find “Backup”
ACTIVE DIRECTORY COMPONENTS
LOGICAL STRUCTURE
PHYSICAL STRUCTURE
Domains
Trees
Forest
Organizational units
Sites
Domain controllers
A.D. Components:
•
Logical structure is useful for organizing the network.
•
Logical components cannot be seen
•
Physical structure is useful for representing our organization for
developing the organizational structure.
•
It reflects the organization (mirrors)
•
Physical structure can be seen. Ex. Site – India, US, UK etc.
TREE:
A tree is a group of domains which share contiguous name space.
If more than one domain exits we can combine the multiple domains into
hierarchical tree structures.
The first domain created is the root domain of the first tree.
Additional domains in the same domain tree are child domains.
A domain immediately above another domain in the same domain tree is its
parent.
FOREST:
Multiple domain trees within a single forest do not form a contiguous
namespace. I.e. they have non-contiguous DNS domain names
Although trees in a forest do not share a name space, a forest does have a
single root domain, called the forest root domain
The forest root domain is, by definition, the first domain created in the forest.
The two forest wide predefined groups – Enterprise.
Administrators and schema administrators reside in this domain.
Physical structure
SITES:
Site is a combination of TCP/IP, subnets, connected with high-speed links.
Sites provide replication
There are 2 types of replications
1. Intrasite replication
2. Intersite replication
Intrasite Replication: It is a replication with in the same site. It offers full time
replication between DC & ADC when they are within the same site.
Intersite Replication: It is a replication between two different sites.
Intersite replication is implemented when the sites are away from each other.
-It requires a site link

-Site link is a logical connection between sites, which can be created &
scheduled.
-Site link offers communication only at scheduled intervals.
Implementing sites:
Forceful replication:
On DC
Start >programs> admin tools > ADSS > expand sites > default first site>servers
>Expand DC server > NTDS settings >right click on automatically generated>replicate
now>ok.
Repeat the same for DC & ADC
Creating a site:
Open ADSS>Right click on sites>New site>Site name (e.g. UK, US)
Select default site link>Ok
Moving ADC into another site:
Select ADC>Right click on ADC>Select move>Select site.
Creating a Site link:
Expand inter site transports>Right click on IP>Select new site link
Link name (ex. Link US –UK)
Scheduling a site link:
Expand inter site transport>IP>Double click on site link>Change schedule
Click on replication not available>set the timings>click on replication available.
KCC: (Knowledge Consistency Checker): It is a service of A.D., which is
responsible for intimating, or updating the changes made either in DC or ADC.
Active Directory is saved in a file calledNTDS.DI T
C:\windows\ntds\ntds.dit
NTDS.DIT - New Technology Directory Services. Directory Information Tree
It is a file logically divided into four partitions.
1. Schema partition
2. Configuration partition
3. Domain partition
4. Application partition
It is a set of rules schema defines AD, it is of 2 parts classes & attributes.
Ad is constructed with the help of classes and attributes.
1. Schema: Logical partition in AD database “template” for AD database.
•
Forms the database structures in which data is stored.
•
Extensible
•
Dynamic
•
Protect by ACL (Access Control Lists) DACL’s and SACL’s
(Directory&System ACL’s)
•
One schema for AD forest.
Collection of objects is called class.
Piece of information about the object is called attribute.
2. Configuration Partition: Logical partition in AD database.
•
“map” of AD implementation
•
Contains information used for replication logon searches.
•
Domains
•
Trust relationships
•
Sites& site links
•
Subnets
•
Domain controller locations.
3. Domain Partition:
•
Logical partition in AD database.
•
Collections of users, computers, groups etc.
•
Units of replication.
•
Domain controllers in a domain replicate with each other and contain a full
copy of the domain partition for their domain.
•
DCs do not replicate domain partition information for other domains
4. Application Partition:
•
It is a newly added partition in win2003. It can be added or removed
•
It can be replicated only to the specified DCs.
•
Useful when we are using AD integrated services like DNS, TAPI services
etc..
FSMO roles: (Flexible Single Master Operations):
Forest wide Master Operation
1. Schema master
2.Domain Naming master
Domain wide master operation
3. PDC emulator
4. RID master
5. Infrastructure master
Schema Master:
Responsible for overall management of the entire schema in a forest.
The first DC installed acts as a schema master in the entire forest.
There can be only one schema master in the entire forest
Domain Naming Master:
Responsible for addition /removal of domains.
It maintains the uniqueness of domain names.
There can be only one DNM in the entire forest.
3. PDC emulator:
PDC provides backward compatibility for existing NT BDCs and workstations. (If
it is running in mixed mode)
PDC updates the password changes made by the users.
It is also responsible for synchronizing the time.
There can be only one PDC emulator per domain.
4. RID master:
Responsible for assigning unique IDs to the objects created in the domain.
There can be only one RID master per domain
SID – Security Identifier it maintains a access control list. It is divided into two
parts.
1. DID (Domain Identifier)
2. RID (Relative Identifier)
For knowing the SID of the user
>Start>run>cmd> who am I /user
5. Infrastructure master:
Responsible for maintaining the updates made to the user & group membership.
It also maintains universal group membership.
There can be only one infrastructure master per domain
The term flexibility means we can transfer any of the 5 roles from DC to ADC.
Transfer of Roles
:We can transfer the roles for some temporary maintenance issues on to ADC
and again we can transfer back the roles onto DC.
We can transfer the roles in two ways
1. Command mode
2. Graphical mode
Transfer of roles through command
On DC
Go to command prompt and type ntdsutil
Type: roles
Connections
Connect to server (name of ADC ex.sys2)
QTransfer schema master
Transfer RID master
Transfer infrastructure master
Transfer
PDC
QQExit
Transferring roles using GUI
:On DC
Register the schema
For registering schema
Start > run > regsvr32 schmmgmt.dll
Transferring schema master
On Dc
Start>Run>mmc>click on file> select add/remove snap in
Select A.D.Schema>add>close>ok
From console root
Expand console root
Right click AD Schema
Change domain controller
Specify name
Ok
Right click AD schema
Select operations master
Click on change
Yes> ok> file> exit (need not to save)
Transferring Domain naming master:
On DC
Start>p>admin tools> ADDT>right click on ADDT
Connect to domain controller

Select ADC
Ok
Right click on ADDT
Operations master
Click on change>yes>ok> close
Transferring Domain wide master operations:
Start >p>admin tools> ADUC
Right click on ADUC
Connect to DC
Select ADC > ok
Right click on Domain name
Select operations master
Change>yes
Select PDC> change>yes>select infrastructure>change>close>close.
GLOBAL CATALOG
It is a service responsible for maintaining information about the objects and
serving the requests made by the users by providing the location of the object.
Global Catalog runs on the port number 3268.
All types of queries are first heard on this port number and forward the query to
port no.389 (LDAP’s).Maintains the complete information about the objects within
the same domain and partial information about other domains.
GC communicates to infrastructure master.
If DC & ADC are located in the same location only one GC is enough.
If the DC&ADC are located remotely to avoid network traffic we need to configure
ADC as GC
Infrastructure master contacts global catalog for obtaining the updates about user
& group membership and universal group membership.
The primary functions of GC
To maintain universal group membership information, to easily locate the objects
with in the AD.:
Configuring a Global catalog server.
Either on ADC or on Child DC
>Start >program>admin tools> ADSS> expand sites >default first site>server>
On NTDS right click> properties>check the box Global Catalog.
Installing Child DC:
Requirements:
Parent DC
Member server or stand alone server
Static IP
DNS
NTFS volume with 250 MB of free HDD space
On Member Server or stand alone machine specify the server’s DNS.
>Start
>run>dcpromo>next>next>next>domain
controller
for
a
new
domain>next>
Child Domain in an existing tree>specify the parent domain’s administrator’s name &
pwd. >Specify the child name>next>netbios name> next> database folder>
next>Sysvol>next>restart.
Installing New Domain tree in an existing forest:
Requirements:
Forest (initial domain controller or root domain controller)
On member server or stand-alone machine.
Specify the server’s DNS.
Start>run>dcpromo>next>next>next>Domain Controller for a new domain.
Select Domain tree in an existing forest.
Specify the root domain’s admin’s name & pwd
Next> specify the new domain name>next>net bios name>next>database >
next>sysvol>next>DNS next>permission compatible >next>restore mode pwd>next
Trust Relationship: Trust is a process of enabling resources of one domain to be
accessed by another domain.
Functional Levels:
1. Domain Functional Level:
A) Windows 2000 mixed
B) Windows 2000 native
C) Interim
D) Windows 2003 server
2. Forest Functional Level:
a) Windows 2000 mixed
b) Interim
c) Windows 2003 server.
Windows 2000 mixed:
By default when we install 2000 or 2003 o/s it gets installed in win 2000 mixed
mode.
This mode supports older versions of win2003. We can add NT, 2000 flavors in
2003 networks.
Windows 2000 native:
It supports only 2000 and 2003; Native mode can have 2000&2003 flavors only.
Interim:
This mode can have NT and 2003. Useful when we upgrade NT to 2003
Windows 2003 server:
This mode supports only 2003 server family.
We can’t join NT/2000 domains
Types of Trusts:
Trust relationships in Windows server2003:
Default two way transitive Kerberos trusts (intra forest)
Shortcut – one or two away transitive Kerberos trusts (intraforest)
Reduce authentication requests
Forest-one or two way- transitive Kerberos trusts.
WS2003 forests WIN 2000 does not support forest trusts
> Only between forest roots
>Creates transitive domain relationships.
External – one way non-transitive NTLM trusts.
Used to connect to /from win NT or external 2000 domains.- manually created.
Realm – one or two way non-transitive Kerberos trusts.
Connect to /from UNIX MT Kerberos realms.
Establishing Trusts:
The Domain where we have user accounts is called trusted domain.
The domain where we have resource is called trusting domain.
Trust between parent and child is two way transitive trusts.
Ex; A trusts B, automatically B trusts A this is a two way trust.
Trust between parent and Grandchild domain is called implicit trust.
One-way trust or Non-transitive Trust: A trusts B, but B doesn’t trust A
Transitive trust (2 ways):
If A trusts B, B automatically trusts A
One way incoming trust:
It means A is getting the resources from B and B is offering the resources.
One way out going trust:

A is offering resources to B and B is getting resources from A
Benefits of Domain Functional Level:
Win 2003 server Level:
The moment we raise the functional level, form mixed mode to win 2003 mode
we get the following benefits.
Universal groups
Group nesting
Domain renaming tools.
Benefits of Forest Functional Level:
Win 2003 level
We get complete benefits of 2003 when we raise the level from 2000 to win 2003
server.
We can implement forest trusts.
Acceleration of global catalog replication information.
Domain renaming
Implimenting Forest Level:
Raising Domain Functional in both the machines:
>Start>program>admin tools>ADDT>right click on Domain>raise Domain
Functional Level>select win 2003>click on raise>ok>ok
Raising Forest Functional Level:
>Start>p>ADDT>right click on ADDT>raise forest functional level>select
win2003>rise>ok.
Member Server: A server, which is a part of DC, is called Member Server.
Server like WINNT, 2000 and 2003 can be configured as Member Server.
Server, which is part of the Domain, is called Member Server.
Member Servers are used
Load balancing
Load sharing form DCs
A member server can be configured as any of the following servers.
Application service (oracle/SQL)
Mail server
File server
Print server
DNS server
DHCP sever
Web server
RIS server
RAS server
T.S.
Configuring a member server
Requirements:
DC
Stand alone server 2003 flavor
On Stand-alone server:
Configure TCP/IP
Specify DNS server’s address
My computer right click
Select properties
Computer name
Change
Domain
Specify name (ex: zoom.com)
Ok> it says welcome to domain
Restart system.
Configuring win2003 or XP professional as a client:
Same as configuring member server;
Server: Ex: NT, 2000, 2003
Client: ex: WKS, Prof., And XP
User Management:
User Account: User A/Cs is useful for assigning to the user to participate in the
network.
There are two types of accounts
Domain User Accounts
Local User Accounts
1. Domain User Accounts: These are created in the AD and they proved
centralized management of users besides easy administration
2. Local User Accounts: These can be created on the Local machines where the
client works. Ex. 2000 prof. XP prof. < win2003 member server etc.
These accounts do not provide centralized management.
Suitable only for smaller organizations where there is no server.
Creating a Domain User Accounts
.On DC
Start> Programs>Admin tools> ADUC>expand domain name(ex.IBM.com)

>Right click on users>new>user>supply name &pwd. >User must change pwd at
next logon>next>finish
Creating a Domain User A/C through command prompt;
Start>run>cmd
dsadd user cn=username,cn=users,dc=ibm,dc=com –pwd zoom_123
For removing
dsrm user cn=username…….
Creating a local user Account in Member Server
On member server
Log on to local user a/c
Right click on my computer
Manage
Expand local users
Right click on users.
New user
Supply the user name&pwd
Click on create
Log off
Log in as user
Creating a Local user a/c from command mode
On member server
Login as administrator
Net user username
Password
Ex: net user u1 zoom_123 /add
If we want to delete.. /del
User right assignments (Logon locally allowing logon locally right to a normal
user.)
On DC
Create a user a/c in ADUC
Allowing him to logon
Start >programs>admin tools>DCSP>expand local policies>user rights>D/C
allow logon locally>add the user.
Start>run>gpupdate.
Verify:
On DC logon as a user
Disabling password complexity policy:

Start
>programs>admin
tools>domain
security
policy>expand
a/c
policies>password policy
>Double click on p/w must meet complexity requirements.
Select disabled
Apply >ok
Minimum pwd length (do it as 0 characters)
Close
For refreshing policy
Start >run>cmd>gpupdate
Password policies: Enforce password history 24 pwds remembered
Maximum p/w age
Minimum pwd age
Pwd must meet complexity requirements
Store pwds using reversible encryption.
Re-setting User passwords:
On DC
Start >p> ADUC >expand users
Select the user right click
Reset password select
Shortcuts:
Start > Run
For ADUC
dsa.msc
For ADSS
dssite.msc
For ADTT
domain.msc
For DCSP
dcpor.msc
For DSP
dompol.msc
SHARING
In order to make a resource to be available over the network and to be accessed
by network users we need to implement sharing.
The moment we create a share on a server, server acts like a file server.
Sharing a resource:
On DC
Open my computer
Select any drive
Create a new folder
Give name of the folder
Right click on the folder
Select sharing and security
Share this folder
Apply > ok
Accessing share resources from a client machine:
On client machine
Open my network places
Entire network
Microsoft windows n/w
Domain name (ex. Zoom)
Computer name
Creating a share through command line
:On DC
md sharename
net share sharename=c: \share name
Connecting to a share resource through a command prompt:
On member server
net use z:\\computername\sharename
Mapping a drive (connecting to the share from GUI):
On member server
Right click on my computer
Map network drive
Select the drive letter
Uncheck or check reconnect logon
Browse the share folder
Computer name>share name>ok>finish.
Permissions
Using permissions an administrator can either allow or deny access to a
resource.
Resource can be a network resource or local resource
Permissions are of two types
1. Share level
2. File system or NTFS
Share level permissions
Share level permissions are applied over the network.
Share level permissions are not applied on the local machine where the resource
is existing.
There are three types of share level permissions
Full control RWXDO (Read/Write/Execute/Delete/Ownership)
Change
RWXD
Read
R
Practice:
On DC
Create a share
Create three users
Set permissions
Setting permissions:
Create folder> share> right click on folder> properties> permission
> Remove everyone
>Add all the users whom you want to allow or deny.
>Apply>ok.
Verification:
Move on to client machine
Login as different users
Try to access the n/w resources.
2. NTFS permissions:
NTFS permissions are powerful permissions and they offer file and folder level
security. NTFS permissions are useful for securing locally available resources.
NTFS Features:
File/folder level security
Compress
Encryption
Quotas
Reduced fragmentation
Hot fixing
Volume shadow copy services
Mounting
Separate recycle bin for each user
NTFS permissions
Full control
RWXDO
Modify
RWXD
Read & Execute
RX
List folder contents L
Read
R
Write
RWX
Implementing NTFS permissions
:On member server-Create a folder
On DC-Create 3 users.
On member server
Right click on the folder
Properties
Security
Add the users we have created on DC
Ok
Select the user and set the permission
U1-full control
U2-modify
U3-read
Apply-ok.
Experiment2:
Login as administrator on member server
Create a folder
Folder properties
Security
Advanced-uncheck the box allow inheritable permissions..
Remove
Apply – ok.
Add the users we have created along with the administrator
Administrator -full control
U1 – full control
U2 – modify
U3 – read – apply – ok
Full control permissions

This permission offers complete control i.e., taking ownership and setting
permissions on files and folders.
Users who have full control permission can take ownership of a resource
The moment a user creates a folder he becomes an owner of a folder.
Owners will have full control access
Taking ownership of a folder:
On member server
Create a folder
Go to properties of the folder
Security
Add the user to whom we want to give permission
Ex: u1-full control
Apply – ok
Step2: login as a user1 (u1)
Go to the folder properties
Security
Advanced
Owner
Select user
Check the box replace owner on
Apply – ok
Share level
NTFS level
N/W
Local
Read
read
read
read
Change
read
change
read
Read
modify
read
modify
Read
write
read
write
Profiles
Profiles are used for providing basic user environment needs
Environment needs can be
Desktop settings
Startup applications
N/w connectivity.
Profile is responsible for providing the initial desktop environment needs with the help of
desktop folder, favorites, cookies, my documents, start menu, and Internet settings, n/w
connections and etc.
When a user logs in for the first time the user will be loaded with a default user
profile.
Default user profile is located under
C:\documents and settings\default user
Types of profiles:
Local profile
Roaming profile
Mandatory profile
Local profile: It is a profile loaded for the user and saved in the local hard drive
where the user works.
And profile will be saved when a user logs off
Local profiles are limited only to the machine where they are saved.
A user with a local profile will not be loaded with a network profile when he logs
on from another machine.
Verifying the type of the profile:
My computer
Properties
Advanced
User profile – settings
Roaming Profile: It is a profile, which is saved in the shared folder on the server.
Hence available in the entire network.
Roaming profile is a n/w profile which is available in the entire network. As a result
when a user logs in from any machine in the n/e he will be loaded with a roaming.
Creating a roaming profile:
On DC
Create a user A/C
Create a folder
And share it and give full control permission for everyone
Start >P>ADUC
Double click the user
Profile
Profile path ex: \\sys1\profile\username
Apply – ok
Move on to member server
Log in as user
My computer
Properties
Advanced-profile settings-you should notice “roaming profile”.
Mandatory Profile: Mandatory Profile is a profile used for controlling desktop

environment setting especially used for restricting user from saving user data,
setting, and configuration on the desktop.
It is a type of roaming profile but settings are not saved when a user logs off.
Changes will be available only for the session where user is active. (Active
session)
Creating a mandatory profile:
Open the profiles folder you’ve created for roaming
There will be a user folder
Take the ownership of the folder of the user
Right click on the folder properties
Security – ok – advanced
Owner – administrators
Replace owner on sub >apply – ok
Open the folder
Rename the file
Ntuser.dat to ntuser.man
Back
Give back the permission (ownership)
Folder
Properties
Security – advanced
Check the box Allow inheritable
Check - Replace permission entries on all
Apply – ok
Verifying:
Login as user
Make some desktop changes
Create a folder or delete a folder
For removing mandatory profile just rename ntuser.man to ntuser.dat
Home folders:
Home folders are separate folders where users save their data and protect their data from
other users every user can have one home folder either on the server on the local
machine.
If the home folder is in the server an administrator can secure it and back-up.
If the home folders are created in the local machine backing up is not that easy.
Creating a user home folder in a server
On member server
Create a home folder for user1
Share it
Permissions
Remove everyone
Add administrator and user1
Give full control for both
Apply ok
Open ADUC
Create a user a/c
Go to user properties
Profile
Connect home folder
Select the drive letter
To mention the path
Ex: sys1\u1\home\u1
Apply ok
Verifying:
On client machine
Log in as user
Open my computer
We should notice an extra drive letter
Go to cmd prompt
We should not get the drive letter we have assigned.
Creating a local home folder:
On Member server
Create a folder in any drive
Share it
Permissions
Remove everyone
Add administrator &u2
Give full access
Apply – ok
Move on to server or DC
Open
ADUC
create a user
Profile
Home folder
Give local path
Ex: E:\u2home
Apply-ok
Verifying:
Login as user
Go to command prompt.
We should notice the local folder
Offline folders:
It is a feature of 2000&03-network resources in spite of no network connections
(offline)
Implementing offline folders
On server client
Open my computer
Tools
Folder options
Offline files
Check the box enable offline files
Apply – ok
Repeat same process on the client also
On server
Create a folder
Share it
Everyone full access
On the client machine
Access the share resources through the n/w places
Right click on the share resources
Make available offline
Next
Check the box automatically
Next – finish
Access the n/w share
Disabling NIC
Network places
Properties
Right
click
on
LAN
select disable
Open n/w places
We will notice another system
Access the offline folder from server
Do some modifications to that folder
Enable NIC.
DFS (Distributed File System)
DFS allows administrators to make it easier for users to access and manage file
that are physically distributed across a network.
With DFS, you can make files distributed across multiple servers. It may appear
for users that files actually reside in one place (computer) on the network.
Benefits of DFS
1. Easily access: users need not remember multiple locations form where they
get data just by remembering one location they get access to the data.
2. Fall tolerance: for master DFS server we can have a replica (Target) on another DFS
server. With the master DFS server face users can still continue accessing the data from
back up DFS (Target)
There is no interruption to accessing data
3. Load balancing: if all the DFS root servers and targets are working fine it leads
to load balancing.
This is achieved by specifying locations for separate users.
4. Security: We can implement security by using NTFS settings.
DFS Terminology:
1. DFS root
2. DFS links
3. DFS targets
4. Domain DFS root
5. Stand – alone DFS root
Domain DFS root: it is a server configurable in the domain and offers fall tolerance and
load balancing. It is a root server, which maintains links from other file servers
Requirements: DC or Member Server
Stand-alone DFS root: It is configurable work group model and does not provide
fall tolerance &load balancing
DFS root: DFS root is the beginning of a hierarchy of DFS links that points to
shared folders.
DFS link: a link from a DFS root to one or more shared file or folders.
Targets: the mapping destination of a DFS root or links, which corresponds to a
physical folder that has been shared.
Implementation of DFS
Creating a DFS root:
On DC
Create a folder in any drive
Share it
Give everyone full control
Use the folder name as DFS root
Create 2 more folders for links
Share them & everyone full control
Start >p>admin tools>DFS
Right click on DFS
New root
Select domain root
Domain name
Browse the server DC
Next mention the root name
Browse the folder to share
Next – finish.
Implementing DFS links
On DC
Create 2 folders.
Share them & give full control permission
On Member Server also same process
On DC
Start > P>Admin tools>DFS>right click on DFS
New link
Link name (e.g. Germany)
Browse the share folder from DC
Ok
Create all four links two from DC & two from member server
Accessing the resources (links)
Either on DC or member server
\\domain name\DFS root name
ex: \\zoom.com\DFS root
Implementing of DFS target:
On Dc
Open DFs
Right click on DFs root
Select new root target
Browse server name >next
Browse folder to share
Next>finish
Replication: After configuring the target we can configure the replication between
DFS root and DFS target.
And this can be scheduled.
Types of replication topologies:
Ring topology
Hub & spoke topology
Mesh topology
Configuring replication between DFS root & target.
On DC
Open DFS
Right click on the DFS root
Configure replication>next
Select topology
Finish
Disk Quotas:
It is a new feature of 2000&03
Using this feature an administrator can restrict the users from using disk space.
i.e. an administrator can limit the size of the disk space usage.
Quotas can be implemented in two ways
On computer basis (local machine)
User basis (network resource)
Quotas can be implemented only on NTFS volumes.
Implementing & quota for a user (user basis)
On member server
Open my computer
Right click on D or E drive
Properties
Quota
Check the box enable quota management and
Deny disk space to users
Click on quota entries tab
Select quota
New quota entry
Select the user
Set limit disk space to the user (in KB or MB only)
Verification
Login as user
Open the restricted or quota drive
Try to save something
Implementing quota on computers
On member server
Login as admin
Open my computer
E drive properties
Quota
Enable quota management
Deny disk space to user
Select limit disk space
Specify the limits in KB or MB
Apply – ok
Organizational Units (OU)
It is a logical component of AD
It is a container object
It can contain objects like users, groups, computers, share folder, printer, and
contacts.
OUs are basically used for dividing a single domain into smaller portions for
efficient management and organization of the resources
Creation of OUs:
On DC
Start >P>admin tools>ADUC
Right click on the domain
New
Organizational unit
Give the name of the unit
Delegate Control:
Useful when an administrator to handover partial administration of the domain to
an assistant administrator delegate control can be assigned to sub admins on
OUs or on domains.
Assigning Delegate control for sub administrator.
On DC
Open
ADUC
select domain controller (right click)
New user
Right click on OU
Delegate control
Next – add the user we’ve created.
Next>select as our wish
Next – finish
Verification:
Login as sub administrator
Start – run – dsa.msc
Try to create users in delegated OU
Taking back delegation of control from a User:
On DC
Open ADUC
Click on view
Advanced features
Select the OU which we want to take back control
Right click > properties
Security
Select the sub admin user
Remove – apply – ok
Group Policy
It is a feature of 2000&03 with which an administrator can have full control on users and
computers. Using group policy we can implement security, policies, software
deployment, folder redirection, Internet explorer maintenance.
Group policies enable the users either to access or to be denied of an object.

Group policy can be implemented on computers &users.
Group Policy Object (GPO)
GPO defines polices implemental for the objects. One group policy object can be
linked with multiple objects like site, domains, DCs, OUs, etc…
The order in which the group policy is applied.
When user logs in
Computer policy
Eg: no shut down, no time setting
User profile
Eg. Local, roaming, mandatory
User policy (local computer)
Site
Domain
OU
Implementing group policy on OU:
Aim: Deny accessing Control Panel
On DC
Open ADUC
Create an OU
Create user within the OU
Right click >properties
Group policy> new>
Specify GPO name
Edit
Expand user configuration
Select administrative templates
Control panel
Double click “prohibit access to control panel”
Select enable
Apply – ok
Policy inheritance:
If we implement policy on sites it applies to all the domains and OUs within that
site. All the domains & OUs within that site inherit policy from its parent.
Block policy inheritance:
Block policy inheritance is useful for blocking the inheritance of the policy from its
parent object
Note: 1. Useful when we have to perform shorter administrative tasks.
2. When there is conflict between two policies applied to the same object.
Implementing block policy inheritance:

On DC
Open
ADUC
create an OU and a child OU within it.
Create a user a/c in child OU
On the parent OU deny control panel
Select child OU > properties
Group policy
Check the box block policy inheritance
Verification
Move client machine log in as user, we have created in child OU.
We should notice control panel.
No override: It is an option available from group policy useful when we want to
override all the policies implemented on the child objects
Implementing override
On DC
Open ADUC
Select the parent OU
We have created
Properties
Group policy
Options select no over ride
Note: No over ride is opposite to block policy inheritance;
Important group policies
User configuration
Administration templates
Windows components
Windows explorer
-Prevent access to drive
-No entire network
-Remove map drive
Under user configuration
Administrative templates
Expand system
-Run only allowed windows applications
-Do not run specified applications
Group policies are of two types.
1. Computer configuration
Software settings Windows settings Security settings
2. User configuration
Software setting
Windows setting
Administrative templates
Group Policy – II
Software Deployment
It is a feature of 2000&03 can be implemented through group policies either on
computers or users.
It is a process of spreading out the software required onto the client machines
when a user starts the computer.
With the help of software deployment we can install, uninstall, upgrade, repair
and add patches &service packets.
Software deployment is possible only when the software is with .msi extension.
(msi – Microsoft Installer)
MSI provides the services like
Installation
Uninstallation
Roll back
Repair over the network.
Software deployment is possible only with .msi or .zap extension.
Using WININSTALLLE 2003 software we can convert *.exe files to *.msi files
Setup.exe file cannot be deployed over the network but can be converted to setup.msi
files with the help of the software ‘wininstall le2003’. This is the product of Veritas
Company.
Installing wininstall le2003 software
On DC
Open D or E drive
Application folder
Double click on wininstallle.exe
Next – I accept – next
Provide email details – next
Next – next – install – finish.
Phase – I
Converting .exe to .msi (before snap shot)
On DC
Open my computer
Select any drive
Create 2 folders with the names .exe and .msi
And share them with full access
Open D or E drive
Open application folder
Copy acrobat &retina
Paste it in the .exe folder we have created
On DC
Start > p> wininstall le2003
Right click on that
Run discover ok – next
Specify the name of the application (ex. Acrobat)
Click on the dotted tab
Browse .exe folder from my n/w places
Open the folder and name the application (ex. Acrobat.msi)
Open – next - select C drive
Add the drives, which we have
Next – finish
Phase – II
Installation
On DC
Open my computer
Open exe folder we have created
Install acrobat software
In this phase II process comes up to .mxi
Phase – III
Performing After snap shot
On DC
In wininstall le
Right click on wininstall le packages
Run discover – ok
Perform after snap shot
Next
P-I
P- II
P- III
Scans the system
install acrobat
changes made after
installation
Registry
Software
Available
. mxi
.msi
Conversion Process
Phase –I (before snap shot)
In this wininstall le scans the complete system and the register and checks for
installed applications. And takes the snap shot of the current condition of the OS.
Phase- II (Installation)
In this phase we have to install the software, which we want to convert to .msi
Phase – III (After snap shot)
In this phase wininstall le compares two previous states, before snap shot
&installation and takes another snap shot with installation.
Note: Using these three phases the Microsoft software installer can trouble-
shoot or deploy the software.
Software Deployment
On DC
Open ADUC
Create 2 OUs
Create a user in each OU
Select 1st OU properties
Group policy new
Name the GPO (ex. Deploy)
Edit user configuration
Software settings
Right click s/w installation
New package
Browse the msi s/w from my n/w places
Select .msi
Select publish
Ok
Verification:
On member server
Login as user we’ve created in OU
Open control panel
We should notice the s/w we’ve deployed
Add/remove program
Ok
Types of deployment
1) Publish
2) Assigned
3) Advanced
1) Publish
If we use publish software will be available in control panel and can be installed
when the user wants. (on demand)
2. Assigned
If we select assigned, s/w gets installed on the client machine when a user opens
the application for the first time.
3. Advanced:
It is useful when we want to upgrades s/w, install service packs or patches etc…
Folder Redirection
It is useful when we have implemented mandatory profile for users as a result they cannot
save anything on the desktop, unknowingly if they save, that saved desktop contents
should be saved in another location we call it as folder redirection. (Users do not lose
their data)
Implementing folder redirection:
On DC
Create a roaming profile for a user
And convert it into mandatory
Note: create a new OU at first and create a user in that and make that user
profile as mandatory.
On DC
Open ADUC
Right click on OU we’ve created
Group policy
New > GPO name> edit
User configuration
Windows settings
Folder redirection
On desktop right click
Properties
Select the settings as basic
Browse share folder from n/w places
Ok.
Create a folder
Share it
Every one full access
Verification
On member server
Login as user we’ve created in OU
Save something on the desktop
Ex: save some folders > properties
We should notice the location should be UNC path (Universal Naming
Convention)
Logoff &login
SCRIPTS
Scripts are useful to automate administrative tasks, which are routine. We can
have startup and shutdown scripts, administrative scripts, login & logoff scripts
Implementing scripts using group policy
On DC
Create a folder (in D or E drive)
Share it with full control

Start-run (notepad)
Type wscript.echo “use the force read the source”
Save the file as (filename.vbs) in the share folder we have created
Open ADUC
Create an OU and a user
OU properties
Group policy
GPO name (ex. Script)
Edit
User configuration
Windows settings
Scripts
Double click on logon
Add
Browse the script we’ve save in the share folder from n/w places
Ok
Verification:
Log in as a user
We should notice a welcome message
Backup:
It is a process of protecting user data or system state data on to separate storage
devices.
NT supported only one type of storage media, i.e. tapes.
2000&03 supports tapes, floppies, HDDS (Hard Disk Drives), zip floppies, RSD
(Remote Storage Devices)
Back up utilities:
The default backup utility provided by NT, 2000, 2003.
NTbackup utility Comes along with the OS. Provides minimum benefits could
have optimum benefits.
There are some third part utilities
•
Veritas - BackupExec
•
Veritas - Foundation suite (for UNIX flavors)
•
Veritas - volume manager
•
Tivoli storage manager (IBM)
•
Netback up
Starting back up utility:
On DC
Or member server
Start
Run – ntbackup (or) start > programs> accessories>system tools>backup

Backing up a folder:
Create a folder in D drive and a file in that
Start - run – ntbackup – click on advanced mode
Back up
Next
Select 2nd option (backup selected files.)
Expand my computer from D drive select the folder you’ve created
Next
Select the destination to save the back up
Next – select the type of back up (ex. Normal)
Check the box disables volume shadow copy
Next – finish
Verifying
Delete the backed up folder
Restoring the backed up folder:
Start – run – (ntbackup)
Advanced – restore – next
Select the backed-up file – next – finish
Back up types
Normal
Copy
Incremental
Differential
Daily
1. Normal Backup: It is a full backup backs up all selected files & folders after
back up removes the Archie bit (A)
Achieve Bit: It is a bit used by backup utility to know whether a file is backed up.
It is used as a backup marker.
2. Copy backup: Copy backs up all selected folders but does not remove archive bit after
backing up. Copy is used between normal backup and incremental backup.
3. Incremental backup: backs up all selected files & folders which are changed since
backup marks the files as having been backed up. Removes the archive bit after back up.
4. Differential backup: backs up all selected files & folders. After backup does not
remove the archive bit. It backs up all the files changed since normal back up.
5. Daily backup: it backs up all selected files & folders created or changed
during the day after backed up does not remove the archive bit.
Recommended backup strategy:
1. If we select incremental back up it is faster and restoration is slower. I.e.
more number of tapes have to be restored
2. If we go with differential backup, backup is slow, but restoration is fast i.e.,
just by restoring 2 tapes.
System state data:
Components of SSD:
AD
Boot files
System files
Services
Registry
Com+inf
Cluster info
I.I.S.
SSD is a data store if we want to backup complete AD we can back up system
state data from backup utility.
Taking a back up of system state data:
Start - run – ntbackup – click on advanced mode – backup – next
Select 3rd one system state data – next – save in E drive - create a folder (SSD)
in this folder create a file with filename .bkf – next – advanced - next
Restoration
There are two types of restoration
Non-authoritative restore
Authoritative restore
Restoration of system state data can be done either authoritative or non
authoritative
Non-authoritative restore is a normal restore useful when we have only one DC in the
network. It does not increment the USN values of the objects after restoration. It uses
older USN values only.
1. Authoritative restore: This is useful when we want to restore a specific object
or specific object by incrementing the USN value.
Useful when we have multiple DCs in the N/W.
i.e. one Dc and multiple ADCs
USN Numbers: (Update Sequence Number)
It is a number assigned to the object and gets modify according to the changes
made on the object.
Checking USN values:

Open
ADUC
click on view
Advance features
Object
When we want to perform authoritative restore, we have to restart the system in directory
services restore mode (DSRM) by pressing F8. While booting and selecting DSRM.
Going to backup utility we can restore system state data on completion of the restoration
system prompt us to restart the system. “DO NOT RESTART THE SYSTEM”
If we are not restarting it becomes authoritative restoring, if we are restarting it
becomes non-authoritative restore.
Tombstone: It is an object deleted from AD but not removed. It remains in the AD
for 90 days.
Practice:
On DC
Open ADUC
Create OU & users
Back
up
SSD
check the USN values of user
Delete the user1
Restart the system in DSRM mode
By pressing F8
Open backup utility
Restore SSD
Do not restart
Start> run >ntdsutil
Authoritative restore
Restore subtree cn=u1,ou=India,dc=zoom,dc=com
Yes (or)
Restore database
QQExit
NETWORK ADMINISTRATION
DHCP (Dynamic Host Configuration Protocol)
IPs: (Internet Protocols)
There are two versions in IP
1. Version 4.0
2. Version 6.0
IPs are of two types

Static IPs
Dynamic IPs
Static IP: static IPs are IPs what an admin assigns to the computer manually.
Which are not changeable.
Dynamic IPs: Are the IPs, which are assigned by DHCP server, which are
dynamic. i.e. not constant, changeable.
DHCP: useful for extremely larger networks where we want to centralize the I.P.
management to reduce human errors.
Case2: Useful for smaller networks where there are no administrators or
administrator may not be comfortable with assigning IPs.
ISP – Internet Service Provider
Usually ISPs implement DHCP servers
DHCP is a server which assigns IPs to the clients requested automatically from a
range of IPs.
IP leasing process:
1. DHCP discover: The client machine when turned ON broad casts the network id, broad
castes id, MAC address on Network for discovering DHCP server.
2. Offer: The DHCP server listening to the request made by the client offers a
pool of IP addresses to the client machine.
3. Selection: The client machine on receiving the pool of IP address selects
an IP and requests the DHCP server to offer that IP
4. Acknowledgement: The DHCP sends a conformation about the allotment
of the IP assigned to the client as an acknowledgement.
5. IP lease: If the client machine is not restarted for 8 days, exactly after 4days the client
machine requests the DHCP server to extend the IP lease duration, on listening to this the
DHCP server adds 8 more days for existing 4 days =12 days
If the client machine is restarted again the DHCP lease process takes place and
again the client gets an IP for 8 days.
DHCP requirements:
DC or member server
Static IP
AD
DNS (if it is win 2003)
Installing DHCP server (insert 2003 server CD)
On DC
Start - setting – control panel – add\remove programs – add \rem windows
components - Select n/w services – click on details
Select DHCP server – ok – next
Authorization: When we have multiple DHCP servers we can designate one of
the DHCP servers as an authorized DHCP server.
Authorizing DHCP server:
On DC
Start >p>admin tools
DHCP right click on the server
Click authorize
Refresh
Scope: Scope is a range of IP addresses from which the DHCP server assigns
IPs to the clients.
Creating a Scope:
Open DHCP Server
Right click on server
New scope- scope name
Specify the range next
Specify if we want any exclusion
Lease duration
Next – DHCP options
Router – next – specify the domain name
Server name – client on resolve – add – next – WINS server – next - yes I want
– next – finish
Configuring a client machine to obtain IP from DHCP server
By default all the clients configured as obtain IP automatically
On client machine
Right click on my n/w places
Properties – LAN properties
TCP/IP double click
Ensure that “obtain an IP address automatically” is selected.
Releasing an existing IP: (give up an IP)
Start >run>cmd>ipconfig /release
Obtaining a new IP
Start >run>cmd>ipconfig /renew
Super Scopes:
Group of scopes is called as super scope.
Note: when we have multiple scopes only one scope can be active in order to
enable all the scopes we have to merge all the scopes with super scope.
Creating super scope
Requires multiple scopes
Create 2 scopes.
Right click on server
Say new super scope
Specify the super scope name
Select 2 scopes by holding ctrl key
Next – finish
Address Pool: gives the range of IP addresses we have specified
Address leases: specifies the client (names) and the IP addresses assigned
Reservations: useful when we want to dedicate a particular IP to a particular
system.
Ex: managerial systems, important clients.
To check the MAC address
Start-run-cmd>getmac
To check the MAC address of remote system
Start-run-cmd>getmac /s \\systemname
Implementing reservation
Open DHCP
Right click on reservations
New – reservation – give name - mention reservation name - MAC address of the
remote machine – mention the IP address to be reserved
Close
Start - run – cmd – ipconfig /release – ipconfig - /renew
Scope options: Using scope options we can specify the other servers addresses available
in the network. So that the DHCP server maintains information about all other servers
and provides it to the client machines along with the I.P. addresses. For NT – 66servers
addresses - for 2000-03 - 77
Server options: Useful when we have multiple scopes and provide information to
all the scopes. Where as scope options are limited only to that scope.
Backing up DHCP:
Open DHCP - right click on DHCP – select backup

Select location where we want to save – ok
Restoring DHCP server:
Uninstall DHCP server
Install DHCP server
Open DHCP
Right click on it
Click on restore – specify the backed up path
We should notice our previous scopes.
Name Resolvers:
There are 2 types of name resolvers:
WINS
DNS
Resolver: It is a file which will contain the mapping information of the clients. Ex.
System name and its IP address
WINS: (Windows Internet Naming Service) It is a service of Microsoft used basically on
windows network to resolve NetBIOS names to IP address and IPs to NetBIOS names.
LMhosts: It is a static text file which contains NetBIOS to IP mapping information
it was used instead of WINS.
WINS follow NetBIOS names: operating systems like NT, 95, workstation, 98
rely on WINS. Because these OS follow NetBIOS names
NetBIOS Names: Net bios names are the names assigned to network nodes. NetBIOS
names are the names without extensions. They are called ‘flat names’. 2000 & 2003 also
support WINS.
DNS (Domain Naming Service):
DNS resolves host names to IP addresses IP addresses to host names. Supports
all type of OS. Ex. Windows, Linux, UNIX, Mac.., etc...
DNS: defines a hierarchical namespace where each level of the namespace is
separated by a “.”
Resolver:
Resolving: It is a process of converting IPs to host names & host names to IPs.
Computer that requests DNS resolution.
Issues queries that ask for specific types of mapping of computers and IP
addresses (records)
Query types determine behavior of DNS server receiving query.
Lookup types determine whether a name to IP mapping or an IP to name
mapping is sought.
Query:
Query is a request to find an address of the DNS there are 2 types of queries.
Recursive queries
Iterative queries
Recursive Queries: When a client start a query, query is passed onto local DNS for
resolution if a query cannot find the solution then the DNS on behalf of client forwards
the query to another DNS, And to another DNS and so on until it finds the mapping
information or an answer.
Iterative Query: Query raised by the client to the DNS. If the DNS cannot resolve it sends
a negative response to the client, then the client has to contact another DNS and so on.
In this case the DNS is not forwarding the query but the client itself is contacting
other DNS.
Zone: Zone is a subtree of DNS database. Zone contains the mapping
information with the help of forward lookup zone & reverse look up zone.
Forward Look up zone: Contains host record, which contain host names to IP,
address mapping information
Reverse Lookup zone: it contains mapping information about IPs to host.
DNS requirements:
DC or member server
Static IP address
Installing DNS
Either on member server or on DC
Start - settings – control panel – add/remove programs – add/remove windows
components – select networking services – details – check the box DNS – ok – next
Insert the CD - next

Creating a forward lookup zones:
Start – p – admin tools – DNS
Right click on forward lookup zone
New zone – next – select primary – next – specify the zone name – zone file –
next –select allow both non secure & secure – next – finish
Records:
It is a database which contains information about the zone
There are a few types of records
Host record (A record) used in FLZ
PTR record (pointer) used in RLZ
Alias record (nick name of a host record)
MX record (used for mail server)
1. Creating a host record:
Right click on the zone you have created - new host – specify the servers
address –and IP
Add host - ok - done
2. Creating an alias record:
Right click on zone – new alias
Specify www. – Click on browse the host records – ok
Verification:
Start - run – cmd – ping www.Yahoo.com
Or ping sys1.yahoo.com
Creating a Reverse Lookup zone:
Right click on the R-L zone
New zone – next - zone type - next – specify the IP address – zone file – next –
allow both – next – finish
Creating a PTR record
Right click on reverse lookup zone.
New- pointer – specify IP
Browse host record – ok
Verification:
Start – run – cmd
Nslookup 192.168.1.17
- Reverse lookup zone
Nslookup www.yahoo.com Forward lookup zone.
DNS: DNS server can be configured as follows>
Secondary
Stub (feature of 2003)
AD integrated
Forwarders
Root servers
Caching only server
Primary
Configuring a primary zone:
On DC
Start - p – admin tools – DNS - create a zone & host record
Creating a secondary zone:
On Member server
If DNS is not available install DNS first
Open DNS - right click on FLZ
New zone – next – specify the primary – DNS servers IP address –add – next –
finish
Zone Transfer
On DC
On Primary DNS
Open DNS – right click on zone
Properties
Zone transfer – check box allow zone
Select only to the following servers
Specify the secondary DNS servers IP address
Apply – ok
Primary Zone: Primary zones are created on the primary DNS servers. It is a
read /write copy.
Secondary Zone: There are created on the second DNS server where it holds a
read only copy of the zone.
Secondary zones provide fall tolerance and load balancing to the primary zone.
Secondary zone is a back up for primary zone
Zone transfer:
Zone transfer is a process of transferring the zone from primary to secondary or
secondary to primary. Zone transfers occur when there is a change or modification taken
place on either of the zones.
AD integrated zones:
These are useful when we want to maintain zone information in the AD . zone is saved in
the AD as a result when we back up AD we are also backing up zone information.
If it is a primary zone, zone is saved as a normal text file as a result we have to back p the
zone separately, AD integrated zone is created when we install AD with a domain name.
Creating in AD integrated zone:
On DC
Open DNS
Right click on FLZ
New zone
Next - check the box store the zone
Next - specify zone name
Next – allow both – next – finish
Stub zone:
Stub zone is a newly added feature in WIN 2003 stub zone contains name server
information or name server records and SOA records (Start of Authority)
Stub zones provide fault tolerance & load balancing besides providing the name
server & SOA record information.
Stub zones are useful for resolving the query faster.
Creating stub zones:
On DC
Create a primary zone with a host record ex: hp.com
On member server
Open DNS
Right click on FLZ
New zone - next
Select stub zone
Next – zone name ex.hp.com
Zone file – specify the primary DNS server’s address - next – finish
Resource Records (RR):
RRS are useful to provide the information about the zone. There are a few types
of resource records.
Host a record
Pointer record
Alias record
MX record
AAAArecord
ATMA
HINFO etc…
Service Records: There are also called as SRV records. These are useful for locating the
services. There are totally 6 service records created when we install AD. They are located
in DNS under domain subtree.
When we install AD, system automatically creates an AD integrated zone with the
corresponding domain name.
Record types:
Msdcs: Contains the Dc’s information
Default site: Contains site name
Tcp: (server side) provides global catalog, Kerberos and LDAP information
Udp: (client side) provides Kerberos information
Domain DNS zone
Forest DNS zones
both are the part of application partition. Provides
DNS information in entire forest.
Creating a secondary zone for (DC) domain name zone:
On member server
Open
DNS
right
click
on
F
L
Z
next – secondary – specify the DC’s
Domain name (ex: zoom.com)
Specify the DC’s IP address
Next – finish
Move on to DC
Open DNS
DC’s zone properties
Zone transfers
Only on the following
Specify the IP address (secondary)
Move onto member server refresh the zone
This process is we call as safe zone transfer.
Note:
1) If the 6 service records are not found in secondary server we need to restart
net logon & DNS services on DC & Member server.
2) Still if we can’t find the 6 service records we need to perform a forceful transfer
For accessing C drive through command prompt.
Ex. \\sys1\c$
Implementing forceful transfer:

Create secondary zone for dc zone.
On member server
Start – run - \\server name \c$
Open windows\System32\ config\netlogon.dns – open – select all – copy the
contents – open my computer of local machine – windows – system32 – DNS
open domain name.dns ex. Zoom.com
Come down of the page - paste - save - close –
Open DNS
Should be noticed 6 service files without refreshing
Verifying the type of zone:
Open
DNS
right click on the zone properties
Type of zone secondary
If we want to change click on change
Dynamic Updates:
It is a feature of 2000 & 03 when a client machine or a network node comes on
line; automatically get their names registered in DNS database.
Dynamic updates take place when there is a modification or change done at the
client or when we have DHCP server.
There are 2 types of Dynamic updates
Secure & Non-secure
Secure Updates:
Useful when we do not want our DNS maintain outside our network host
information.
Non-secure updates:
DNS gets updated as and when what all the hosts come online get their names
registered with DNS server.
Note: secure updates can occur only when the client machines have their a/cs in
DC
Configuring secure &non secure updates:
Zone – properties
Dynamic updates
Select either secure or non-secure
Apply - ok
Zone properties:
Name Server - Existing DNS server’s address
Zone transfer
General (status, type, aging, Dynamic Update)
SOA (Serial no., Responsible person, refresh interval)
WINS (existing WINS address, used for NetBIOS resolution)
DNS Server Properties:
forwarders
event logging
interfaces ( used when we have multiple NICs)
Monitoring
Security
Root hints
Debug logging
Advanced
Interfaces:
Useful when our system has multiple NICs and the DNS can listen the queries
from all available NICs
Offers load balancing
Forwarders: If the query is not resolvable by the local DNS it is being forwarded
to another DNS server for name resolution
Configuring Forwarding
:On DC
Create a primary zone with a host
On Member server
Open DNS – properties
Forwarders
Add the DC’s IP (DNS1’s IP)
Verification:
On Member server
Start - run cmd – ping www.Zonename.com
Advanced:
Disable recursion
BIND secondary (Berkeley internet naming domain)
Fail on load if bad zone data
Enable round robin
Enable net mask ordering
Secure cache against pollution
Disable recursion: By default this is disabled i.e., recursion is enabled
BIND secondaries: useful when we have older BIND servers (ex. UNIX) as
secondaries BIND is a standard followed by DNS.
All UNIX based machines older version used BIND servers as DNS. Ex. BIND
version 4.0 series.
Useful when our network has old BIND version based DNS servers with new BIND
versions like 9.1.2, to provide zone transfer at faster rate to BIND secondaries.
Faster zone transfer is possible by transferring multiple zones at a time besides
compression.
Fail on Load if bad zone data:
If the secondary zone comes across stale records or unwanted records the zone
will not be loaded if we check this box.
Enable Round Robin (RR):
Useful when the DNS has multiple NICs to listen the queries all NICs. If the query
is not resolvable by one NIC it can be listened by another NIC
Enable net mask ordering:
Secure cache against pollution: By default the cache DNS information is secured
against pollution.
In windos\system32\DNS\cache.dns
Root Hints: Root hints provide the root server’s information
There are totally 13 root servers throughout the world.
2003 server can be configured as root server. Once configured as root sever
disable forwarders and root hints.
Root servers zone name is always represented by a dot. (.)
Configuring a root server:
On DC
Open DNS
Right click on FLZ - new zone –
Primary – next – specify the root name as dot (.)
Next - zone file – allow both-Next – finish
* We should notice that forwarders &root servers are disabled.
Security: We can add sub administrator for administrator and set permission on
these administrators.
Monitoring: used for troubleshooting DNS.
Event logging: Used for maintaining events occurred pertaining to DNS can be
Errors only
Errors & warnings
All events (by default)
Debug Logging: to assist with debugging we can record the packets sent and
received by the DNS server to a log file. Debug logging is disabled by default.
Implementing Round Robin:
Assigning multiple IPs to the NIC. By going to TCP/IP properties – advanced –
add – multiple ips – ok (ex. 192.168.1.17, 192.168.1.18, 192.168.1.19)
Open
DNS
create a primary zone – create a host record - create 3 more host records with
the IPs created above
Verification:
Go to command prompt.
For clearing DNS cache
C:\> ipconfig /flushdns
Pingww w.z onenam e.com
IIS
Internet Information Service (I.I.S.): It is a web server from Microsoft used for
administering, managing, controlling websites.
I.I.S. is the server component which provides services like www, http, ftp, nntp,
SMTP, FrontPage, .net frame works
WWW: World Wide Web: enables use of internet.
HTTP: (Hiper text transfer Protocol): Supports file types like text, audio &video
Gopher: used prior to http supported only text.
FTP: (File Transfer Protocol): used for uploading or downloading, huge size files.
NNTP (Network News Transfer Protocol): Used for publishing the same message
for a group of people.
SMTP: (Simple mail transfer protocol); Used by exchange server for sending
mails.
Front page: It is a designing tool for WebPages
Win – NT 4.0 had I.I.S. version 2, 3 and 4.
Win 2000 I.I.S. version is 5.0
Win 2003 - 6.0
Port number details are available at c:\windows\system32\drivers\etc\services
Port: port is a communication channel through which services of one system

communicate with the services of other system each service has one port number allotted
Features of I.I.S. (6.0)
Fully secured
Reliability
Salability
Manageability
Isolation of users.
Backup of websites
Requirements
:DC or member server
Static IP
NTFS partition
Web pages
DNS
and
Zones
with
concerned
records.
Installing I.I.S.:
On DC or member server
From Control Panel
Add/rem programs
Add/rem windows components
Select application server
Click on details
Select I.I.S.
Details
Select F.T.P. & www. Services
Ok – next
Requirements of a website
Web content or web pages
Zones with host records
Public IP
Creation of a Website:
(Create the zones in DNS with a host records)
Start - p – admin tools – I.I.S. right click on websites – new - website –
description ( site name, ex: yahoo)
Select the I.P> (system’s IP)
Specify the host header as www. Sitename.com ex: www.yahoo.com

Browse the WebPages folder
Next
Check the box ‘browse’
Next – finish
Adding the web content:
Right click on the .htm file name concerned
Rename – select copy – right click on the website we’ve created >properties –
documents – add - paste – ok – move up the htm we’ve copied. – Apply – ok.
Verification:
Open internet explorer
Type the website you’ve created
Virtual Directory: These are useful for creating child websites or links
Ex: mail servers, chat servers, advertisement servers etc…
Creation of Child websites:
Right click on the parent website we’ve created
New – virtual directory – next – child name - ex: mail- chat etc..
Browse WebPages folder
Check the box browse - next – finish.
Adding Web Contents
Select .htm file
Right click – rename
Copy – select child website – properties – documents – add – paste – ok
Move up – apply – ok
Verification: open Internet Explorer and type website name.”www.yahoo.com\chat
Redirecting a website:
Redirection is useful in various cases.
Case1: renaming of the website where users are unaware of the change.
Case2: when the website is under construction
Case3: when the website hosting server is unavailable, we go for redirection
Implementing redirection or configuring redirection:
Create 2 websites
Select web content create 2 websites
Select web content
Create 2 zones with host records corresponding
Open I.I.S.
Right click on the website we want to redirect

Properties - home directory – select a redirection to url
Ex:http:// w ww. Sitename.co m apply – ok
Verification:
Open I.E. type the 1st website name
It should open second website
Document footer:
Useful for publishing advertisements in a particular websites and seen as a footer
for the website
Open I.I.S.
Right click on the website
Properties
Documents
Check the box enable documents footer
Browse webpages folder
Select any .htm file
Apply – ok
Backup of website:
It is a new feature in 2003. We can backup and restore websites.
Open I.I.S.
Right click on the website we want to back up
All tasks-Save configuration to a file
Give filename & select the browse
File where we want to save – ok
Verification:
Delete the website you’ve backed up
Restoring a website:
Open I.I.S.
Right click on the websites
Select website from file
Browse the backup file we have saved
Click on read file
Select the site name – ok
FTP (File Transfer Protocol)
It is a service of I.I.S. used for uploading or downloading large amount of files
over internet or intranet. runs on a port no.21
Creating an FTP site:
On DC
Open E drive
Create a folder FTP root

Create few files in that folder
Open I.I.S.
Right click on FTP - new – FTP site
Next – FTP name – ex EDPFTP – Select IP
Next - do not isolate users – browse the FTP folder we have created in E drive
Next – select read &write - next – finish
Connecting to FTP server
On member server
Start – run – cmd – create a folder local in E drive - ex: md local
Cd local
Ftp (server’s ip address)
Type administrator
Type password
You will be at FTP>.
Downloading a file from command line:
Get
Type the filename to be downloaded
Type the filename to be saved as (same file name)
Uploading a file from command line
Put
Type the filename to be uploaded
Type the filename to be saved as (same file name)
Downloading multiple files: mget *
Turning off interactive mode: prompt (system does not prompt for conformation
while downloading multiple files.)
Uploading multiple files: mput *
Practice: on DC
Create an FTP folder
Host some files in that FTP folder
On member server
Connect to ftp site
Download the files
Upload the files
Create a folder in ftp site
Upload the files to this remote folder
FTP commands:
Dir
-
for listing FTP contents
Get
-
for downloading
Put
-
uploading
Prompt
-
disable interactive mode
Mget
-
downloading multiple files
Mput
-
uploading multiple files
Bye
-
ending session
Close
-
close the session
Mkdir
-
to create a folder in ftp site
Rmdir
-
to delete a folder
Del
-
to delete a file
Pwd
-
to list present working dir
Lcd
-
locally change directory
Cd
-
change directory in ftp site
Bell
-
gives beep sound after the action
Anonymous account: It is a default a/c available with ftp any user can login to ftp
server despite no a/c in FTP server.
Connecting to FTP server as anonymous user
Ftp server’s I.P. or
Open I.P. address
Type anonymous
Provide password if it has
Disabling anonymous connections:
Open I.I.S.
FTP site properties
Security accounts
Uncheck the box allow anonymous connections - yes
Verification
Go to FTP prompt & try to login as anonymous user.
Isolation of Users:
When we want to secure the ftp contents or when we want ftp users to have their
own folders with ftp site we use isolating users.
Creation of isolating ftp users
Create 2 users in AD
Open E drive
Create a root folder
In the folder create a subfolder named as our domain name without extension ex.
Zoom, India. - - u1, u2, u3
Creating a FTP site for isolating users open I.I.S.
Right click on new FTP site
FTP site name – select the IP
Select isolate users – next
Browse the root folder we’ve created
Ok – next – check the box write – next - finish.
Verification:
On Member server
Open I.E.
Type ftp:\\I.P. add of ftp server
We should notice logon window
Provide user name & pwd
Then we notice the file we’ve created.
Groups
Groups: Are two types
Security
Distribution
Groups are useful for setting common privileges or type of access to a group of
users.
Security Groups: These are used for setting permissions on the objects (printer,
data) it can also be used as a distribution groups.
This can also be used for maintaining distribution list
Distribution group: Do not provide security, used for e-mails.
Group scope: identifies the extent of the group within in a domain or a forest.
•
Domain Local Group: all builtin class groups
•
Global Groups: domain user, domain admins, domain guests, domain
computers.
•
Universal groups: schema admins, enterprise administrators.
Domain Local Groups: DLG pertains to the domain and it is a powerful group used for
setting permissions a DLG can contain user a/cs, global groups, it cannot contain DLG.
Group scope:
DLG used for setting permission on resources

GG: used for organizing the users.
UG: used for or organizing the users, groups from more than one domain.
Creating Groups:
On DC
Open ADUC
Create users like s1, s2, s3, a1, a2, a3, t1, t2, t3 and m1, m2, m3
Right click on the user
Create 4 groups (sales, account, technical, marketing)
Adding users to a group: double click a group
Click on members and add the users
Creating a DLG:
Right click on users
New- group name – select domain local
Adding users to DLG
Double click the DLG we’ve created
Add the users
Creating universal groups:
By default UGs are not available because the O.S. runs in mixed mode. In order
to enable UGs. We’ve to raise the domain functional level to native mode.
Raising domain functional level:
Open ADUC
Right click on domain
Raise domain F.L.
Select windows 2000 native raise
Creating a universal group
Right click on users class
New – group – name – select universal – ok
ROUTING
It is a process of enabling communication between two different networks.
There are two types of routers.
1. Hardware router
2. Software router
Hardware router is a physical hardware device.
Software router: A server with 2 NICs called software router.
Ex: NT, 2000, 2003, UNIX can be configured as software router
A computer with 2 NICs is called a multihomed system.
Requirements of the Software Router:
DC or member server or stand alone machine
2 NIC cards
Two different networks
Routing &RAS service
Benefits of Routing:
DUN (Dial Up Networking)
NAT (Network Address Transmission)
Basic firewall
VPN (Virtual Private Network)
LAN routing
Enabling LAN routing
Start > P> Admin tools>RRAS>r/c server> configure & enable routing.
NAT: It is a service of routing provides network address translation from private to
public
When we have 2 networks public & private in order to protect private network
from public network (intruders) we need NAT.
NAT enables one way communication. I.e. private network can communicate with
public network but not vice versa.
Implementing NAT
S-P- Admin tools
Open RRAS
Expand IP routing
Right click on general
New- routing protocol – select NAT/basic firewall – ok
Adding interfaces
Right click on NAT/basic firewall
Select new interface
Select the private interface
Ok
Again right click on NAT basic services
New interface
Select public interface
Click on public inter face connected to the internet
Checks the box enable NAT on this interface
Apply – ok
Verification:
On private network
Ping public network
It should ping
Move on to public network
Ping private network
It should not ping
Disabling NATing
On router
Open RRAS – expand IP routing
Right click on NAT /basic firewall
Delete – yes
Routing Protocols:
Static
Dynamic
Dynamic: It requires dynamic routing protocols there are a few dynamic routing
protocols. Dynamic routing enables a router could prepare dynamically automatically on
its own.
i.e., when a router is added or removed when there is a change of I.P.S. etc. will
be known by the dynamic routing protocols, to see the routing table.
On command prompt
Type root print
Routing table contains the information about
Network destination: destination of the packet reached
Net mask: subnet mask of the system.
Gateway: another router’s address
Interface: Local NIC’s address
Metric: determines best path
RIP (Routing Information Protocol)
OSPF (Open Shortest Path first)
NAT
IGMP (International group management)
IGRP (international gateway)
DHCP Relay agent
Static routing: It does not require any protocols; an administrator has to create a
routing table which is constant or not changeable.
DHCP Relay agent:
It is a protocol responsible for listening to the client request for assigning an IP to
the clients dynamically on behalf of DHCP server from the other network
Implementing DHCP relay agent
On router
Open RRAS
Expand IP routing
Right click on general
New routing protocol
Select DHCP relay agent
Ok – add public interface
General new interface
Select public
Configuring public network
Move on to public network
Go to TCP/IP properties
Check ‘obtain IP automatically’
RAS (Remote Access Service)
It is a feature of 2000 & 2003 enables communication between a local machine &
a remote machine
RAS connectivity: types of connectivity
PSTN (public switch telephone network)
ISDN (Integrated Services Digital Network)
X.25
RS 232 (Recommended standard)
DSL (Digital Subscriber Link)
Direct cable
PSTN:
•
Modem
•
Telephone line
•
28.8 kbps
•
cheaper
•
analog communication
ISDN:
•
ISDN adaptors (TA)
•
ISDN line
•
64- 128 kbps
•
Digital communication
•
Costly
X – 25
•
PADS (frame relay)
•
Packet switching n/w
•
Rarely found
•
PADS - Packet Assemblers & De assemblers
RS – 232
•
Serial cable (direct cable)
•
Provides serial communication
•
Used for testing RAS
•
Provides RAS environment
•
It is also called as ‘Null modem’.
DSL (Digital Subscriber Link)
•
DSL modem or NIC
•
Widely available
•
Easy to implement
Direct cable
•
When we are in same geographical
•
Implemented only in LAN
•
Bridge modem (special devices)
•
Uses a direct cable to establish a communication between local& remote
network
Installing Modem:
On server& client
Open control panel
Open phone & modems
Click on modems – add
Check box don’t detect modem
Select communication between two computers
Select comp1 – next – finish
Same process in client machine also
Enabling routing on DC
Open RRAS
Right click server
Configure & enable routing
Next – custom configuration
Next – select VPN, dial up – next – finish.
Creating a dial connection
My network places - properties
Double click on new connection wizard
Next – select setup &advance connection
Next - connect directly to another computer – guest – next –computer name
(server’s name)
Select the device ‘communication cable between 2 computers
Connection availability – next – finish
Note: By default users are denied permission to dial in.
To enable a user to dial in
On server
Open ADUC
Dial in
Allow access – ok
Error: 649 enable the user dial in access
Error: 777 – Reinstall the modem.
Establishing Dial up connection
Dialing into the server
My network places – properties
Double click DUN we’ve created
Provide user name & pwd
Click on connect
Accessing resources of a remote computer over RAS connection
Start – run (\\server name\resource name) ex: (\\sys1\c$)
LAN protocols:
NETBEUI protocols
IPX/SPX
TCP/IP
NW link
AppleTalk
DEC net
1. NETBEUI: It is a self-configurable protocol mostly use in small networks, outdated
protocol, jointly developed by IBM &Microsoft. Does not support routing.
2. IPX/SPX: It is a proprietary protocol of Novell NetWare. IPX stands for
Internet Packet exchanger SPX – Sequential Packet exchange.
Suitable for larger networks. It is a routable protocol.
3. TCP/IP: (Transmission Control Protocol): It is an industry standard
protocol.
IP – supported by many OS. It is a routable and robust (ever changing)
protocol.
4. NW Link: (Netware Link) from Microsoft enables communications between
NT, 2000&2003 & Novell NetWare.
5. Apple talk: from Microsoft enables communication between NT 2000/03
used in Mac. OS.
6. DEC Net: (Digital Equipment Corporation): protocol used by mini computers , super
computers and jet direct printers. (this printer has its own NIC)
WAN protocols:
SLIP
PPP(Point to Point Protocol)
SLIP: SERIAL LINE INTERNET PROTOCOL
It is used on UNIX networks
Outdated protocol (not available now)
Doesn’t support
Data compression
Data encryption
Error checking
Doesn’t support
NETBEUI
IPX/SPX
PPP: POINT TO POINT PROTOCOL
Most popularly used in WAN protocol replaced by SLIP
Supports various protocols
Supports data compression
Data encryption
Error checking
VPN (Virtual Private Network)

Using public network for private use we call it as VPN.
To protect the private data over internet, It uses protocols like L2TP, PPTP
VPN uses internet for providing communication between two different networks and
With the help of these VPN protocols private data is tunneled and sent to the destination.
L2TP: (Layer 2 Tunneling Protocol)
Jointly developed b Microsoft & CISCO
Supports all types of networks ex: IP, frame relay, IP sec etc..
Supports header compression
PPTP: (Point to Point Tunneling Protocol):
Developed by Microsoft runs only on IP based networks
Doesn’t support header compression
Establishing VPN connection:
VPN connection requires a primary connection which can be DUN, ISDN,
internet etc.,
Creating a VPN connection
On client machine
My network places – properties
Double click new connection wizard
Next- connect to network at my work place
Next – VPN – name – public network
Specify the server name ex: sys1
Anyone’s use – finish
Terminal Services:
Terminal Server is a server used for centralizing the management of applications
It provides remote administration for administrators.
T.S. provides sharing of application and resources.
It is used when a company cannot upgrade their client machines, hardware
infrastructure.
Benefits of terminal services:
Centralized management applications
Centralized security using NTFS permissions
Easy to administer
Easy management of TS clients
Remote administration
Terminal server provides only the subset portion of the desktop to the client machines.
i.e. when a client establishes a terminal session only the desktop portion is downloaded to
the client machine to interact with.
During the session the terminal server uses the protocol called RDP. (Remote
Desktop Protocol)
With the help of this protocol client obtains the server’s desktop on to the client it
is nothing but thin client. Only the mouse clicks and key stokes are sent to the TS
Requirements of Terminal server:
DC
Member server
Applications (MS office, oracle, java, PageMaker etc)
Installing terminal server
On DC
Open control panel add/remove programs
Add/rem windows components
Check the box terminal server - next – yes – next –
Select relaxed security - insert CD (win2003)
T.S. operates in two modes
remote desktop mode
application mode
If we want to configure T.S. only for remote administration we should select
remote administration mode.
If we want to configure T.S. for centralizing management application server we
should go with application mode.
Application mode offers remote administration as well as applications.
In win2003 we can install T.S. in 2 ways.
fully secured mode
fully relaxed mode
Fully secured mode: if we select this option users will not have access to registry files &
system files and it doesn’t provide backward compatibility for existing OS or
applications.
Fully Relaxed mode: Provides access to registry and other system resources
useful when the security is not criteria or for performing remote administration.
Terminal Server Licensing:
By default when we install T.S. the clients can access T.S. only for 120 days.
It is a free license provided by T.S. license manager.

T.S. License manager: responsible for maintaining the T.S. license information
and contacting Microsoft clearing house for obtaining the license activation.
When a T.S. client establishes a session with T.S. the client has to obtain a
license key in order to access the applications.
Licensing mode:
There are 2 modes
1. Domain Licensing mode
2. Enterprise licensing mode.
1. Domain Licensing mode: suitable when we want to maintain a separate
licensing manager for each & every domain.
NOTE: T.S & licensing manager cannot be configured in same server.
Enterprise license mode:
Suitable when we’ve multi domain model and centralizing the licensing manager
or issuing of the license keys to the terminal clients.
Only one T.S. licensing manager is maintained in the enterprise domain and is
connected to Microsoft clearing house from where it gets authenticated.
Installing T.S. client or Remote Desktop:
On client machine
C:\windows\system32\clients\tsclient\win32&setup
Before establishing the T.Session on both T.S. & client machines
Step1: my computer - properties – remote – check the box remote desktop (allow
users)
On DC
Create a user in ADUC
On member server
Establishing a session
Start – p – accessories – communication – remote desktop connections
Supply the IP of TS - connect
Provide the username &pwd we’ve created – ok
Error1: the local policy of system
Solution: move on to DC
Start – p – admin tools – DCSP – expand local policies &user rights – select the
option ‘allow log on through terminal services’
Add the user whom we want to allow
Apply - ok - start – run – gpupdate
Try to login with the same user name
Error2: We don’t have access to logon to terminal session
Solution: move on to DC
Start – p – admin tools
Open T.C. configuration

Double click RDP- TCP - permissions
Add the user – full control - apply - ok
Again try to login – we should login.
Remote control: R.C. is used for viewing the session or interacting with the
session.
•
View Session: If the administrator selects this option, the remote control
session will be give only used for monitoring users.
•
Interacting session: useful when an administrator wants with user to
provide remote assistance or troubleshooting.
Remote Control: To have remote control of the user, an administrator has to
login to the TS and only through the TS he can take the remote control of the
user.
Implementing remote control:
On member server
Login as a user
Establish a terminal session as a user
On DC
Start - P – admin tools – Terminal Services configuration
Double click RDP - remote control
Select the type of control we want to view/interact
Apply – ok
Establish a session on to the same machine by typing server’s IP
In terminal session
Start – p – admin tools
Open terminal services manager
Right click on user – remote control
Select the release keys (ex.Ctrl+ Z)(used for giving up remote control ) – ok
Allowing Local resources to be available on TS session.
Before login
On the member server - options
Open remote desktop connections
Options - local resources
Check the box disk drives
Connect & ok
* When we open my computer of T.S. we should notice the local drives.

Allowing user to access only a particular application through TS.
(Run only allowed applications for a user)
On DC
Open
ADUC
Go to the user properties
Following program
Specify the program (ex. Notepad, cmd, etc.)– File name – ok
Allowing a common application for all the users from TS
On DC
Start – p admin tools – open TS configuration – double click RDP
Environment – check the box override setting – specify the application name
Ok
ISA (Internet Security Accelerator)
It is useful to speedup internet access and to protect private network from public
network. It is actually firewall & acts as a proxy.
Types of firewalls:
Hardware firewall
Software firewall
Hardware firewall: CISCO pix, watch guard, multi com Ethernet II
Software firewall: ISA server
Checkpoint
Smooth wall
Firewall: a firewall protects networked computers from international hostile
intrusions.
Types of Attacks:
1. Foot printing
2. Scanning
3. Dos attack (denial of service)
4. Exploits ex. Cgi scripts, perl scripts etc.)
5. Trojan horses ex: netbus, bo2k
6. Port scanner
1. Foot printing: the art of gathering the complete security profiles of an organization or a
target computer. By using a combination of tools and techniques the hacker can take up
the system and determine its IP address and domain names.
2. Scanning: Scanning the system for bugs and loopholes in OS. Hacker uses scanning
technique to determine which ports are open what services are running and what is the
OS
Ex: RATINA, shadow security scanner, ANSIL etc..
3. DOS attack: Denial of service attack which is an attempt to get the service
or the server down by overflowing the buffer. Eg. Win spoof a7, my spoof.
4. Exploits: Exploits are usually bugs in applications or OS which can be
exploited by using a piece of code often referred as scripts.
Ex: CGI scripts, perl scripts etc..
5. Trojan Horses: Trojan horses are a program that pretends to be a useful
tool but actually installs malicious or damaging software.
Trojan Horses can be used to take over the remote system sending viruses to
steal the data. Ex. Netbus, Bo2k.
7. Port scanner: Scanning the port to get into the application ex: port
scanner, etc.
ISA can be configured as firewall or proxy server.
If it is configured as a firewall,
Packet filtering: ex: routers controls data transfer based on source destination IP
addresses
TCP/UDP port of source destination IP address.
Packets are allowed or dropped through the device depending on the access
control list.
If it is configured as proxy it acts like a web server
Application gateway: ex: proxy server.
Packets are allowed based on type of application and IP address.
Filter application commands such as http, GET and POST etc..
Application level gateways can also be used to log user activity and logins.
Flavors of ISA server:
Standard edition
enterprise edition
Server deployment
stand-alone only
multiple servers with
centralized
management.
Policy based support
Local only
enterprise
&array
policies
Scalability
CPU’s only
no limit.
ISA server requirements:
Member server or DC
Service pack 1 or above
Two interfaces (public & private)
RRAS
Processor: PIII 300 MHz. Or above
256 MB RAM
20 MB of H.D. space on NTFS 5.0
Array considerations:
ISA server models:
Firewall model
Cache model
Integrated model.
Installing ISA
On router
Open D or E drive
ISA standard - ISA – setup.exe
Select integrated mode &continue
Private
Router
Pubic
IP: 192.168.1.2
192.168.1.1
202.153.32.2
202.153.32.1
G/W 192.168.1.1
202.153.32.1
DNS 202.153.32.2
202.153.32.2
202.153.32.2
1) Enable LAN routing
create websites & zones
2) Install ISA
Specify the range of address.
Installing ISA service pack
Open D or E drive
ISA 2k standard
ISA service pack2.enu
Update
Update.exe – next – agree – next
Cache mode: select this option if security is not the criteria as it is used for
accelerating the access speed of websites by the private network users. Since it
maintains the recently accessed websites information in the ISA as cache

information.
It can’t act like a firewall.
Firewall: useful if we want to configure ISA as firewall, which protects the private
network from public network. With the help of some protocol rules and policy elements
we can set the security. We can also control the type of traffic to be allowed in or
allowed-out.
Integrated mode: useful when we want to configure ISA as cache&firewall server.
Key features of ISA:
internet firewall (Instruction detection)
secure sever publishing
Web caching server.
Secure NAT.
Integrated VPN.
Tiered policy management
Web filters (for blocking audio, images etc.,)
Alerts
Multi processor support
QOS (Quality of Service)
Client side auto discovery.
Access is controlled based on
client address sets
destination sets
protocol rules
bandwidth priorities
Allowing websites
On router (ISA)
Start - programs – ISA server
ISA management – expand server
Creating a client address set:
Expand policy elements
Right click on client address set
New – set name of the set – ex. Sales
Add the range of available IP adds. Including ISA – ok
Setting Protocol rules:
For allowing websites
Expand access policy
Right click on protocol rules
New rule
Specify the rule name

Allow next protocols next schedule
Next – client type – select specific computers
Next – add the client add set we’ve created – ok – next – finish
Configuring the proxy client
Move onto private network
Right click IE
Properties
Connections
LAN settings - check the box proxy server
Specify the add of ISA server &port no. 8080
Ok
Open Internet explorer and access any website
Denying a particular website
Creating a destination set:
Expand policy elements
Right click on destination set
New set - specify the destination
Website name – click on add – specify the destination name
(Which site we want to block) – Ok
Creating a site & content rule:
Expand access policy
Right click on site & content rule
New rule - specify the name allow or deny
Rule action (do nothing)
Rule configuration
Destination set, select specified destination set
Select the name – next – finish
Verification:
Move on to private network
Try to access yahoo.com.
It shouldn’t open
Redirecting a website
Create a destination set
Right click site & content rule
New rule specify the name of the rule ex: YRG, YRR
Next - check the box http
Specify the target site name (to which we want to go)
Next – select specify destination set
Click the radio button

Next – finish
Verification:
Typing the source website we should find the redirected website.
Yahoo redirected to google.
Blocking images:
Create a destination set
Site (which we want to block)
Create a site & content rule
Double click on the root we’ve created
Http content
Select content groups
Check the box whatever we want (ex. Images)
Apply – ok
Open the website
We should notice no images
Specifying schedule
Double click the site & content rule we’ve created
Click on schedule
New -specify the day and timing
Mention the schedule name – ok – apply – ok
RIS (Remote Installation Service)
It is a feature of 2000&2003 using which we can deploy operating system
remotely on to the client machines.
Requirements of RIS:
Server side;
AD, DNS, A static IP, DHCP, RIS, 2GB of free space with NTFS partition
Client side Requirements.
Client machine
PXE enabled NIC (Pre Boot execution Environment) or remote boot floppy.
Installing RIS service
On DC
Start
Settings - control panel
Add/remove - add/remove windows programs
Check the box RIS
Insert2003 OS CD- next

Restart
Once the RIS server is ready it depends on the three RIS services for
accomplishing remote installation
Remote installation process
Client machine with pxe enable ROM when booted it will load an initial program to find
an OS from RIS server that program is called ‘start ROM’. When it is doing so it (client)
broadcasts network broadcast, MAC address on the network.
DHCP Server: the DHCP server on listening t the request from the client, assigns
an IP along with the DNS address.
DNS Server: It provides the DC’s information so that the client can contact DC
With the help of MSDCS record
AD: RIS is integrated with AD and AD maintains complete information about RIS server
and available types of images and directs the request made by the client to the RIS server
RIS server: starts the services BINL, TFTPD, SIS. With the help of these services
can perform remote installation of OS on to the requested client.
RIS services:
1. BINL: or RIS: (Boot Information Negotiation Layer): Responsible for
overall management of RIS. It is a service invokes TFTPD and SIS.
2. TFTPD: (Trivial File Transfer Protocol Demon): Responsible for downloading the
O.S. and related files only onto the client machine for remote installation
3. SIS (Single Instance Services): It is responsible for efficient management of Hard Disk
space. Whenever there is a repetition of file copying occurs, it omits copying file, instead
it creates a pointer and this pointer will be pointing to the actual files.
Creating a CD image for remote installation: ex. 2003
On DC
Or RIS server
Start – r – Risetup – next
Check the box respond to the clients
Provide CD ROM drive path
Folder name – next
Friendly description name ex: CD image
Next – finish
Implementing RIS:
On RIS server
Install DHCP server
Authorize it
Create a scope
Verifying RIS server before performing RIS installation
On RIS server
Open
ADUC
Domain controllers
Right side pane- double click on the server
Remote install - verify server-Done.
Performing remote install on client
Boot from pxe enabled NIC or remote bootable floppy.
Press F12 key when the system prompts and installation proceeds.
Note: If don’t see “press F12 for booting from n/w” you have to restart the
services before performing RIS installation:
Start – Admin tools – services
Restart services following
RIS, DHCP, DNS, netlogon, remote installation, TFTPD, single instance store
Insert COMBO CD
Press F12 when it prompts
Creating a remote boot floppy requires 1.44MB floppy
On RIS server
Open the RIS folder from remote install\admin\i386
Insert floppy and double click Rbfg.exe
Creating Additional images.
Open
ADUC
DC properties (right side ex: sys1)
Remote install
Advance settings
Images – add – insert CD
Editing an answer file:
On RIS server
Open the folder remote install\setup\English\images\windows\i386\templates
Double click ristndrd.sif
Do whatever modifications you want
Ex: set it as, Use whole disk =no
Save – close.
RIPREP image
:It is a type of images which includes OS+ applications, settings, security and etc..
Useful when we want to perform remote installation of OS +applications.
To achieve this we have to install OS+ applications +settings & security on one of
the client machines & keep it read
Performing riprep image
On the client machines, which are ready with applications and settings
Start – run -\\ris server name; ex;\\s ys1
Double click reminst\admin\i386
Double click riprep
Next
Server name
Next
Folder name
Ex: client image
Friendly description ex; sales dept.
Next – answer further questions
NOTE: on completion of this, the client will get restarted and starts a mini windows setup
where you’ll have to provide the company name, CD key and so on. Once it is over the
riprep image is ready.
NOTE: riprep image requires a CD image also.
DISK MANAGEMENT
2000 and 2003 uses a tool called Disk management for administering or
managing Hard Disk Drives
Using this we can create, delete, modify, partitions and volumes.
We can also implement software rate, and disk analysis.
To open Disk manager
Start – run – diskmgmt.msc
Or right click on my computer – select manage.
Creation of a primary partition:
Select free space (black color)
R/C -new – partition – select primary
Alter the size - select drive letter
Select the type of format – ex: NTFS
Next – finish.
Creating extended partition:

Right click on free space
New – partition – next – select extended partition
Don’t alter the size - next – finish
Creating Logical partitions:
Right click on the green color partition
New – logical – drive – next – alter the size
Next – drive letter
Type of file system
Next – finish
If we want to delete a partition, right click the partition and delete partition
Storage
Basic Disks – partition – primary partition – extended – Logical partitions
Dynamic disks: simple volume – spanned volume – stripped volume – mirrored
volume – RAID – 5v
Basic Disk: These are referred to partitions.
Using basic disks we can create partitions like primary, extended, logical.
Basic disks are useful for providing backward compatibility with older OS. Like
DOS, 95, 98 etc..
Basic disks are useful while implementing clustering and when we want to have
dual OS in our computers.
Basic disks can have 1primary, 1 extended and logical partition
Or four primary or 3 primary 1 extended and so on.
Basic disks can be converted to dynamic disks
For converting it requires 1MB of free space.
Conversion of basic disk to dynamic:
We can convert form basic to dynamic but not vice versa.
Possible when we get advanced
Converting from basic to Dynamic: (requires 1MB of free space)
Go to disk management
Right click on the disk1
Convert to dynamic disk.
Volume: Volume is made up of free space club or merged fro more than one H.D.
volumes avoid using of multiple drive letters or drives.
Easy to administer
Dynamic volume: Dynamic disks refer to volumes. Using dynamic disks we can
implement and extend volumes and implement raid.
Dynamic disk can be attached or detached on the file.
Simple Volumes: simple volumes are similar to partitions which can be created
only one Hard disk which do not offer fall tolerance.
Spanned Volume: A volume can be created by selecting the free space from
more than 1 Hdd
Span volumes offer extending of volume.
Do not offer fall tolerance
Maximum 32 Hdds
Min 2 Hdds
Creating simple volumes:
Open disk management
Right click on the black bar
New – volume
Select simple volume
Alter the space – next
Drive letter
File system
Check box perform quick format
Next – finish
Creating a spanned volume:
Open disk management
Right click on black bar
New volume
Select span – next
Select disk1&2 reduce &specify the size.
Drive letter – next
Perform – quick format – finish
Extending volume:
Right click on the volume we want to extend
Extend volume - next
Select the drive on which we want to extend the volume
Specify the size - next – finish
RAID: (Redundancy Array Inexpensive Disks or Independent disks)
Raid offers fall tolerance
Fault Tolerance: It is a technique used for protecting data against hardware
failures.
Software RAID: It can be implemented from the OS. Which is not a guaranteed
fault tolerance?
Hardware RAID: can be implemented above the O.S. including the OS is
protected.
Offers highest fault tolerance.
There are five RAID levels
RAID 0, 1, 2, 3, 4 and 5 these are supported by NT/2000/2003
RAID 0: striping without parity
Striped volumes:
Requires min 2 Hdds, max 32 Hdds.
Offers no fault tolerance
Suitable when performance is criteria.
Data is written evenly on to all drives
If any one of the drives fails whole data is lost.
Space selected on all the drives should be of identical size.
RAID 1 or Disk mirroring:
Requires min.2Hdds max.also 2 Hdds
Offers fall tolerance
Data is written onto both the drives simultaneously.
If one drive fails data is still available in the second drive.
I/P performance: reading is fast and writing is slow.
Implementation of mirror:
Create a simple volume ex: 100mb
Right click on S.V. and add mirror
Break mirror: Breaks the mirror and retains the partition and data and changes
the drive letter
Right click on desired drive
Select break mirror
Remove mirror: Removes the mirrored volume.
If we want to break or remove the volume
Right click on mirror volume

Select break or remove
RAID 5 Striping with parity
Requires min 3Hdds max 32 Hdds.
Offers highest fault tolerance
Data is written evenly on to all member striped volumes and
Parity information is also added.
Parity bit: It is mathematical calculation added to every piece of data and used for
regenerating the data when any HDD fails.
Offers performance and availability
I/O performance: Reading and writing both are fast.
Mounting:
It is a feature of 2000 & 2003 used for accessing free space on the hard drive
through a folder when drive letters get exhausted.
Using
mounting:
open disk management
Create a simple volume
While creating select mount in the following MT, NTFS folder
Browse – new folder (create a folder here) – next – quick format – next
Finish
Accessing the Free space through a mount point.
Open the drive where we’ve created the folder.
We find here folder name with a drive icon
ADVANCED
Seizing of Roles: DC & ADC, when Dc abruptly goes down, irreparable, no hopes
of bringing back DC online we should seize the FSMO roles onto ADC
Permanently configures ADC as DC
Implementing:
On ADC
Start - run – cmd – (ntdsutil)
Roles
Connections
Connect to server ADC’s server name
QSeize schema master
Seize Domain naming master
Seize RID master
Seize Infrastructure master
Seize PDC – q – q – exit.
Volume shadow copy services: VSCS

It is a new feature available only in 2003 flavor. Useful for taking online backup
and access recent versions of files and folders.
Useful when the users inadvertently delete their files from network share and want them
back. In case an administrator had taken a snapshot of the volume can retrieve the recent
versions of the files.
Implimenting VSCS:
On server /DC
Create a folder with 2, 3 files in D or E drive
Share the folder
Give full access permissions
Taking a snapshot (VSCS):
Open my computer
Go to the drive properties where we’ve created the folder.
Click on shadow copies
Select the volume
Click on enable
Click on create now
Apply -ok
Verification:
Login from the client machine access the network resources from my network
places
Delete 1or 2 files we’ve created – logoff
To restore a deleted file
Access the network share from my network places
Right click on the share folder
Properties
Previous versions
Click on restore
Apply – ok
Try to access the network share from client machine
We should notice the deleted file restored.
SUS (Software Update Services):
It is a new feature of 2003. When our network client or servers wat their updates
from internet, if internet is available to all the client machines whole network will
be busying updating OS &software. This leads to network traffic
To overcome this problem we have to use a separate server configure as SUS, which is
connected to Internet and obtains updates. Client machines instead of contacting Internet
for updates contact the intranet SUS server for updates. This can be scheduled.
SUS software has to be downloaded from the internet and also I.I.S.
Implimenting SUS:
Install SUS in one of the member servers
On DC
Configuring client machines to contact SUS server for updates.
On DC
Open ADUC
Create an OU
Join the client machines to this OU
OU properties
Group policy
GPO name
Edit
Expand computer configuration
Administrative templates
Windows components
Windows updates
Double click on specified intranet
Enable – specify the server’s add in both the boxes.
To schedule the updates;
Double click o configure automatic updates
Specify the schedule
MBSA (Microsoft Baseline Security Analyzer):
It is a new feature of 2003. It is a service responsible for preparing a report which reveals
a loop holes and draw backs of the OS and the applications installed in the server. Using
this report an administrator can take some precautions.
It is also freely available software in internet. We can download it.
File name is mbsa.msi
It acts like a guide to the administrator
Using MBSA
:start
-
programs
–
MBSA
select scan a computer/scan more than one computer
Provide the IP address of the computer
Click on start scan
It creates a report contains the information about the system.
RSOP: (Resultant Set of Policies):
It is a new feature of 2003 using which we can gather all the policies
implemented by group policy in the entire forest.
RSOP works in two modes logging and planning
Logging: Generates the reports for the users who all have logged in and effected
with the policy.
Planning: it is useful for experimentation. I.e. as an admin Would like to see the
result of the policy before it is implemented.
Using RSOP
Open ADUC
Right click on the OU
Select RSOP
CIMOM (Common Information Management Object Model) is database where
GP settings are registered.
GPMC (Group Policy Management Consol):
It is a new feature in 2003 which centralizes the management of group policies for ex.
multiple forests, sites, OUs; Domains can be administered from a central location.
Gathering of group policies implemented in the entire forest is easy.
Implementing Group policy is also very easy
Back and restore of G.Ps is easy
Once installed, disables group policy option for local, sites & domain.
Software available in internet. Filename is gpmc.msi

Roaming Profile

Uploaded by

Copyright:

Available Formats

Roaming Profile

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Roaming Profile

Uploaded by

Copyright:

Available Formats

Creating a Roaming User Profile

then you copy the test user profile to a network server.

Create a Test Profile

4. Right-click Users, and then click New User.

5. Type a name and password for the user.

6. Click to clear User must change password at next logon.

7. Click Create, and then click Close.

8. Quit the Computer Management snap-in.

9. Log off the computer.

Settings\username folder (where drive is the drive on which Windows is installed).

12. Log off, and then log on as Administrator.

Copy the Test Profile

To copy the test profile to a network server, follow these steps:

2. Click Start, point to Control Panel, and then click System.

System Properties dialog box.

6. Under Permitted to Use, click Change.

and then click OK.

8. Click OK three times.

13. Click OK.

Installing ADC (Additional Domain Controller):

-It requires a site link

Connect to domain controller

One way out going trust:

Start> Programs>Admin tools> ADUC>expand domain name(ex.IBM.com)

Disabling password complexity policy:

Full control permissions

Mandatory Profile: Mandatory Profile is a profile used for controlling desktop

Group policies enable the users either to access or to be denied of an object.

Implementing block policy inheritance:

Share it with full control

Run – ntbackup (or) start > programs> accessories>system tools>backup

Checking USN values:

IPs are of two types

Open DHCP - right click on DHCP – select backup

Insert the CD - next

Implementing forceful transfer:

Port: port is a communication channel through which services of one system

Specify the host header as www. Sitename.com ex: www.yahoo.com

Right click on the website we want to redirect

Create a folder FTP root

DLG used for setting permission on resources

VPN (Virtual Private Network)

It is a free license provided by T.S. license manager.

Open T.C. configuration

* When we open my computer of T.S. we should notice the local drives.

maintains the recently accessed websites information in the ISA as cache

Specify the rule name

Click the radio button

Insert2003 OS CD- next

Creating extended partition:

Right click on mirror volume

Volume shadow copy services: VSCS

You might also like