Häggloader 10HR-B: Atlas Copco
Häggloader 10HR-B: Atlas Copco
Häggloader 10HR-B: Atlas Copco
Häggloader 10HR-B
Technical specification
Technical features
• Hydraulic system powered by an electric motor or a diesel engine. • The front and rear axle, Dana Spicer 213, provides
• The electro-hydraulic drive provides low installation and energy excellent manoeuvrability and the ability to travel sideways
costs, and maintains good air quality in confined spaces
• The diesel-hydraulic drive is used for transportation and can • Service brake: Dana Spicer internal wet discs. The
also be used for minor digging work Häggloader also has a spring applied hydraulic released
• The back-hoe digging system loads the muck onto the parking and emergency brake, Dana Spicer internal S.A.H.R
conveyor, which then fills the haulage vehicle with a constant
flow of muck »»Standard
• The dozer blades effectively clean the floor, thus eliminating the
need for manual clean up • CE mark according to European standards
• The back-hoe system can also be used for lifting and scaling and
provides excellent flexibility for up to 6,2 meter tunnel width »»Options
• The conveyor can be raised and lowered to suit the loading • Extended conveyor + 400 kg
height of different haulage vehicles • Coupling device
• Significantly reduces the number of niches needed and reduces • Cable reel
tyre wear Length and dimension of cable depends on the voltage
• A built in sprinkler system controls dust effectively. chosen. Capacity 100 m at 400V
• Suitable for use in drifts and tunnels with a cross section • Dual digging arm system
from 12 m² and upwards • Quick tool + 90 kg
• The cabin is FOPS II approved and has protective grating. • Hydraulic hammer SB152, SB302
• As standard the cabin is provided with heater and • Other options and dimensions on request
an air conditioner
• The machine is operated from an ergonomic chair with
joysticks placed on pods
• The Häggloader is controlled by PLC via a LCD-panel and
joysticks
• The Häggloader is equipped with two cameras, one front and
rear back, with a monitor in the cabin
• The chassis and conveyor are made of heavy duty steel plate
and use continuous weld processes to ensure maximum
fatigue strength
Häggloader 10HR-B
Technical data
equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information. Graphic by Tomas Öhrling.
© Copyright 2012 Atlas Copco Rock Drills AB, Örebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may show
»»Engine
• Deutz diesel engine (stage III) including silencer and catalytic
purifier. Diesel engine for transport and minor loading
Type: TCD 2012 LO42V, 100kW @ 2300 rpm
Brakes Hydraulic
Tyres 12.00x20”