Copyright Shell Group of Companies. No reproduction or networking permitted without license from Shell.

Not for res

DEP 31.38.01.15-Gen Class 11432, rev. H Page 1 of 15

CLASS 11432

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:58:14
 DEP 31.38.01.15-Gen Class 11432, rev. H Page 2 of 15

Design limits Branch connections 90 degrees

Temperature (°C) Branch Size

-29 0 50 75 100 125 150 Run 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 750 900 1050 1200
Pressure (Barg) size
DN 15-1200 19.6 19.6 19.2 18.4 17.7 16.7 15.8 1200 N N N N P E E E E E E E E E E B B B B A
1050 N N N N P E E E E E E E E E E B B B A
900 N N N N P E E E E E E E E B B B B A
750 N N N N P E E E E E E E B B B B A
Notes 600 N N N N P E E E E E B B B B B A
- Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 500 N N N N P E E E E E B B B B A
- For bending of pipe see DEP 31.38.01.31-Gen. 450 N N N N P E E E E B B B B A
- For basis of design see DEP 31.38.01.10-Gen. 400 N N N N P E E E E B B B A
- Use of coated bolt sets should be considered when exposed to marine environments. 350 N N N N P E E E B B B A
- Piping class range DN 15 [NPS 1/2] up to/incl DN 600 [NPS 24] design meets full vacuum at ambient condition, 300 N N N N P E E B B B A
except DN450 [NPS 18]. 250 N N N N P E B B B A
DN450 [NPS 18] with 2.9 mm [0.114 inch]corrosion allowance meets full vacuum at ambient condition. 200 N N N N P E B B A
For DN 750 [NPS 30] to 1200 [NPS 48], if vacuum condition can occur, piping to be designed accordingly 150 N N N N P B B A
- For hydrotest vent & drains reference is made to standard drawing S.38.154 100 N N N N U B A
- Monoflange slimline valves shall be selected for clean services only. 80 N N N N U A
- Monoflange valve assemblies are offered fitted with 1/2" BSP to either 1/2", 3/8" or 10mm. compression tube 50 N N M M J
fittings. In the assemblies as a default, the 1/2" compression tube fitting is listed. However, selection of relevant 40 N M M J
Monoflange valve assembly to be agreed with principal based on associated local instrument tube fitting 25 M M J
standard. 20 M J
- The use of red. bore ball valves is considered most economical. Use full bore ball valves only when necessary for 15 J
process/operating requirements
- Piston type check valves (DN 15-40) [NPS 1/2-1-1/2] for horizontal mounting only
- The choice of gate valves, swing type check valves vs triple eccentric butterfly valves, dual plate check valves
shall be based upon total purchase and installation cost, as well as weight and space savings. Eccentric butterfly Code Explanation of characters
valves and dual plate check valves shall not be used in fouling or abrasive services. A Equal tee
B Reducing tee
E Branch outlet
Table of schedules J Equal tee BW (alternative SW)
M Reducing tee BW (alternative SW)
DN Schedule N Branch fitting (alternative Branch outlet SW)
15 160 P Branch outlet BW (alternative Branch outlet SW)
20 160 U Reducing tee BW (alternative Branch outlet SW)
25 160
40 160
50 80
80 80
100 40
150 40
200 30
250 30
300 30
350 20
400 20
450 20
500 20
600 20
750 STD
900 STD
1050 11.1 Carbon steel Plant
1200 XS Class no. 11432 Consignee
ASME rating CLASS 150 Engineered by
Corrosion allowance 3 mm Principal
Revision letter H Contr. job no.
Revision date 02/2017 Project no.

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:58:14
 DEP 31.38.01.15-Gen Class 11432, rev. H Page 3 of 15

COMPONENT MATERIAL DESCRIPTION

(For full material description see relevant MESC buying description.)

Pipe Valves

PIPE Pipe DN 15-600 ASTM A106-B BAFF Ball valve float FB flgd DN 15-150 Body: ASTM A105/A216-WCB/WCC
PIPE Pipe DN 400-1200 ASTM A672-C65 cl22 Trim: AISI 316, PTFE
PISM Pipe (API 5L-B sml) DN 100-350 API 5L-B (sml) BARF Ball valve float RB flgd DN 15-250 Body: ASTM A105/A216-WCB/WCC
PIWS Pipe (API 5L-B saw) DN 400-600 API 5L-B (saw) Trim: AISI 316, PTFE
BTFF Ball valve trunn FB flgd DN 200-600 Body: ASTM A105/A216-WCB/WCC
Flanges Trim: AISI 316, filled PTFE
BTRF Ball valve trunn RB flgd DN 300-600 Body: ASTM A105/A216-WCB/WCC
BLFL Blind flange DN 15-1200 ASTM A105 Trim: AISI 316, filled PTFE
LJFL Lap joint flange --- ASTM A105 BUTF Butterfly valve triple of flgd DN 200-1200 Body: ASTM A216-WCB/WCC
SBNF Spectacle blind DN 15-400 ASTM A516-60/65/70 Trim: CS, Duplex, Stellite
SPFL Spade DN 750-1200 ASTM A516-70 CHDF Check valve dual plate flgd DN 300-1200 Body: ASTM A216-WCB/WCC
SPNF Spade DN 15-600 ASTM A516-60/65/70 Trim: AISI 410
SPRT Spacer ring DN 750-1200 ASTM A516-60/65/70 CHVF Check valve flgd DN 15-50 Body: ASTM A105
SRNF Spacer ring DN 15-600 ASTM A516-60/65/70 Trim: AISI 410
WNFL Welding neck flange DN 15-1200 ASTM A105 CHVF Check valve flgd DN 80-600 Body: ASTM A105/A216-WCB/WCC
Trim: AISI 410 , Stellite
Fittings GAVF Gate valve flgd DN 15-50 Body: ASTM A105 (Normalised) Trim: AISI
410/ Stellite 6
CAPB Cap bw DN 15-1200 ASTM A234-WPB GAVF Gate valve flgd DN 80-600 Body: ASTM A105/A216-WCB/WCC
E45B Elbow 45 deg LR bw DN 15-600 ASTM A234-WPB Trim: AISI 410 , Stellite
E45B Elbow 45 deg LR bw DN 750-1200 ASTM A234-WPBW GLVF Globe valve flgd DN 15-50 Body: ASTM A105 (Normalised) Trim: AISI
E90B Elbow 90 deg LR bw DN 15-600 ASTM A234-WPB 410/ Stellite 6
E90B Elbow 90 deg LR bw DN 750-1200 ASTM A234-WPBW GLVF Globe valve flgd DN 80-200 Body: ASTM A105/A216-WCB/WCC
TEEB Tee equal bw DN 15-600 ASTM A234-WPB Trim: AISI 410 , Stellite
TEEB Tee equal bw DN 750-1200 ASTM A234-WPBW MSBG Monofl Slimline SBB G 1/2 TubF DN 15-20 Body: ASTM A182-F316
Trim: AISI 316, PTFE
Reducing fittings MSBH Monofl Slimline SBB G 3/8 TubF DN 15-20 Body: ASTM A182-F316
Trim: AISI 316, PTFE
BN6F Branch fitting flgd DN 40-1200 ASTM A105 MSBJ Monofl Slimline SBB G10mm TubF DN 15-20 Body: ASTM A182-F316
BN6P Branch fitting plain DN 40-1200 ASTM A105 Trim: AISI 316, PTFE
BR3B Branch outlet bw DN 150-1200 ASTM A105 VSBG Monofl ball SBB G 1/2 Tub F DN 15-20 Body: ASTM A182-F316
BROB Branch outlet bw DN 400-1200 ASTM A105 Trim: AISI 316, PTFE
BRSB Branch outlet bw DN 300-900 ASTM A105 VSBH Monofl ball SBB G 3/8 Tub F DN 15-20 Body: ASTM A182-F316
RECB Reducer concentric bw DN 20-600 ASTM A234-WPB Trim: AISI 316, PTFE
RECB Reducer concentric bw DN 750-1200 ASTM A234-WPBW VSBJ Monofl ball SBB G 10mm Tub F DN 15-20 Body: ASTM A182-F316
REEB Reducer eccentric bw DN 20-600 ASTM A234-WPB Trim: AISI 316, PTFE
REEB Reducer eccentric bw DN 750-1200 ASTM A234-WPBW
TERB Tee reducing bw DN 20-600 ASTM A234-WPB Instruments
TERB Tee reducing bw DN 750-1200 ASTM A234-WPBW
TWHD Thermowell flgd DN 50 DN 50-50 ASTM B564 UNS N04400
TWHS Thermowell flgd DN 50 L=230 mm --- ASTM B564 UNS N04400
TWHL Thermowell flgd DN 50 L=255 mm --- ASTM B564 UNS N04400

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:58:14
 DEP 31.38.01.15-Gen Class 11432, rev. H Page 4 of 15

Miscellaneous

GKMA Gasket camprofile DN 750-1200 AISI 316, Graphite

SS centring ring
GKSW Gasket spiral wound DN 15-600 AISI 316, Graphite
CS centring-/SS inner ring
MTRR Meterrun DN 15-40 Alloy 400/ASTM A350-LF2 cl 1 end flanges
ORFS Orifice flange set DN 50-600 ASTM A105
PLUG Plug NPT DN 15-50 ASTM A105
ST3B Strainer Y-type (3 mm ca) DN 50-400 Sieve: AISI 316
STB1 Studbolt with nuts --- ASTM A193-B7/A194-2H
Zn-Ni Electro pl + PTFE top coat

STBT Studbolt with nuts --- ASTM A193-B7/A194-2H

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:58:14
 DEP 31.38.01.15-Gen Class 11432, rev. H Page 5 of 15

PIPING COMPONENTS

Nominal pipe size

15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 750 900 1050 1200
Item description MESC

Pipe

Pipe 743005 0 201 301 401 601 711

Pipe 743005 1 091 491
Pipe 743005 2 111 411 831
Pipe 743005 3 251 731
Pipe 743005 4 211 691
Pipe 743005 5 211 691
Pipe 743023 0 391
Pipe 743023 1 021 601
Pipe 743023 2 161
Pipe 743023 5 471 781
Pipe 743023 6 081 381
Pipe (API 5L-B saw) 741317 4 191 691
Pipe (API 5L-B saw) 741317 5 211 691
Pipe (API 5L-B sml) 741312 1 491
Pipe (API 5L-B sml) 741312 2 111 411 831
Pipe (API 5L-B sml) 741312 3 251 731

Flanges

Blind flange 766211 0581 0621 0661 0681 0701 0721 0741 0761 0781 0801 0821 0841 0861 0881 0901 0921
Blind flange 767012 0561 0621 0681 0741
Spacer ring 768875 0031 0061 0091 0121
Spacer ring 768902 0021 0041 0061 0081 0101 0121 0141 0161 0181 0201 0221 0241 0261 0281 0301 0321
Spade 768895 0031 0061 0091 0121
Spade 768930 0021 0041 0061 0081 0101 0121 0141 0161 0181 0201 0221 0241 0261 0281 0301 0321
Spectacle blind 768960 0021 0041 0061 0081 0101 0121 0141 0161 0181 0201 0221 0241 0261
Welding neck flange 766278 4021 4041 4061 4081 3601 3621 3141 3161 2581 2601 2621 2141 2161 2181 2201 2241
Welding neck flange 767082 0171 0411 0611 0751

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:58:14
 DEP 31.38.01.15-Gen Class 11432, rev. H Page 6 of 15

PIPING COMPONENTS
Nominal pipe size
15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 750 900 1050 1200
Item description MESC

Fittings

Cap bw 763019 0221 0281 0321 0421 0581 0781 0951 1151 1331 1531 1731 1921 2121 2321 2551 2751 6191 7691 8411 9031
Elbow 45 deg LR bw 763038 5721 5781 5821 5921 6081 6281 6451 6651 6831 7031 7231 7421 7621 7821 8051 8251 1191 2691 9401 9841
Elbow 90 deg LR bw 763040 5721 5781 5821 5921 6081 6281 6451 6651 6831 7031 7231 7421 7621 7821 8051 8251 8641 9011 9431 9631
Tee equal bw 763084 5721 5781 5821 5921 6081 6281 6451 6651 6831 7031 7231 7421 7621 7821 8051 8251 1121 2691 3381 4031

Valves

Ball valve float FB flgd 770025 5031 5041 5051 5071 5081 5101 5121 5131
Ball valve float RB flgd 770025 0031 0041 0051 0071 0081 0101 0121 0441 0451 0461
Ball valve trunn FB flgd 770228 5151 5161 5171 5181 5191 5201 5211 5231
Ball valve trunn RB flgd 770228 0171 0181 0191 0201 0211 0231
Butterfly valve triple of flgd 774130 0151 0161 0171 0181 0191 0201 0211 0231 0261 0291 0321 0341
Check valve dual plate flgd 776711 0171 0181 0191 0201 0211 0231 0261 0291 0321 0341
Check valve flgd 771013 0031 0041 0051 0071 0091
Check valve flgd 771020 0101 0121 0141 0151 0161 0171 0181 0191 0201 0211 0231
Gate valve flgd 772020 3031 3041 3051 3071 3091 0101 0121 0141 0151 0161 0171 0181 0191 0201 0211 0231
Globe valve flgd 773014 0031 0041 0051 0071 0091
Globe valve flgd 773020 0101 0121 0141 0151
Monofl ball SBB G 1/2 Tub F 778558 8701 9201
Monofl ball SBB G 10mm Tub F 778558 8721 9221
Monofl ball SBB G 3/8 Tub F 778558 8711 9211
Monofl Slimline SBB G 1/2 TubF 778559 8701 9201
Monofl Slimline SBB G 3/8 TubF 778559 8711 9211
Monofl Slimline SBB G10mm TubF 778559 8721 9221

Miscellaneous

Gasket camprofile 854190 0481 0541 0601 0661

Gasket spiral wound 854136 3041 3061 3081 3121 3141 3181 3201 3241 3261 3281 3301 3321 3341 3361 3381 3421
Meterrun 766496 0521 0541 0561 0581
Orifice flange set 766295 1051 1061 0231 0241 0131 0141 0151 0061 0071 0081 0091 0101
Plug NPT 760518 0081 0121 0161 0181 0201
Strainer Y-type (3 mm ca) 768319 4261 4281 4061 4081 4451 4461 4471 4481 4491

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:58:14
 DEP 31.38.01.15-Gen Class 11432, rev. H Page 7 of 15

REDUCING/PIPING COMPONENTS

Run x Br RECB REEB TERB Thermowell flgd DN 50

20 x 15 7630721411 7630731411 7630890391 Length (mm) MESC number
25 x 15 7630721511 7630731511 7630890491 230 7683385611
25 x 20 7630721611 7630731611 7630890591 255 7683385621
40 x 15 7630721711 7630731711 305 7683385731
40 x 20 7630721811 7630731811 7630890791 355 7683385751
40 x 25 7630721911 7630731911 7630890891 405 7683385761
50 x 20 7629461931 7629611931 455 7683385771
50 x 25 7630721991 7630731991 7630891111
50 x 40 7630722081 7630732081 7630891201
80 x 40 7630722291 7630732291
80 x 50 7630722371 7630732371 7630891331
100 x 40 7630722521 7630732491
100 x 50 7630722661 7630732661 7630891571
100 x 80 7630722761 7630732761 7630891691
150 x 80 7630722961 7630732961 7630891811
150 x 100 7630723051 7630733051 7630891891
200 x 100 7630723241 7630733241 7630892111
200 x 150 7630723341 7630733341 7630892311
250 x 100 7629463421 7629613421 7630892591
250 x 150 7630723521 7630733521 7630892771
250 x 200 7630723631 7630733631 7630892901
300 x 150 7630723811 7630733811 7630893161
300 x 200 7630723941 7630733941 7630893271
300 x 250 7630724031 7630734031 7630893491
350 x 150 7629466001 7629616001
350 x 200 7629466451 7629616371 7630893971
350 x 250 7630724321 7630734311 7630894221
350 x 300 7629467151 7629616871 7630894481

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:58:14
 DEP 31.38.01.15-Gen Class 11432, rev. H Page 8 of 15

REDUCING/PIPING COMPONENTS

Run x Br RECB REEB TERB

400 x 200 7629468251 7629617731
400 x 250 7629468701 7630734601 7630895121
400 x 300 7630724781 7629618751 7630895381
400 x 350 7630724821 7630734821 7630895541
450 x 250 7630725321 7630735321 7630896101
450 x 300 7630725621 7630735621 7630896341
450 x 350 7630725811 7630735811 7630896501
450 x 400 7630726111 7630736111 7630896741
500 x 300 7630726521 7630736521 7630897541
500 x 350 7630726711 7630736711 7630897701
500 x 400 7630727011 7630737011 7630897941
500 x 450 7630727311 7630737311 7630898181
600 x 300 7630898741
600 x 350 7630898901
600 x 400 7630728811 7630738811 7630899141
600 x 450 7630729111 7630739111 7630899381
600 x 500 7630729411 7630739411 7630899621

Comp.name Description
BN6F Branch fitting flgd
BN6P Branch fitting plain
BR3B Branch outlet bw
BROB Branch outlet bw
BRSB Branch outlet bw
RECB Reducer concentric bw
REEB Reducer eccentric bw
TERB Tee reducing bw

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:58:14
 DEP 31.38.01.15-Gen Class 11432, rev. H Page 9 of 15

REDUCING/PIPING COMPONENTS

Run x Br RECB REEB TERB Run x Br RECB REEB TERB

750 x 400 7630956501 1050 x 600 7630967821
750 x 450 7630957101 1050 x 750 7630968141
750 x 500 7630957611 1050 x 900 7629526321 7629726321 7630968451
750 x 600 7629510901 7629710901 7629898111 1200 x 600 7629896461
900 x 450 7630963441 1200 x 750 7629897061
900 x 500 7630963501 1200 x 900 7629897661
900 x 600 7630963701 1200 x 1050 7629526651 7629726651 7629898261
900 x 750 7630613031 7630793031 7630964301

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:58:14
 DEP 31.38.01.15-Gen Class 11432, rev. H Page 10 of 15

REDUCING/PIPING COMPONENTS

Branch Run pipe BN6F BN6P BR3B BROB BRSB

15 40 - 50 7672293201 7672693511
15 80 - 150 7672293211 7672693521
15 200 - 900 7672293221 7672693541
15 1050 - 1200 7672293231 7672693551
20 50 - 50 7672293241 7672693561
20 80 - 250 7672293251 7672693571
20 300 - 900 7672293261 7672693581
20 1050 - 1200 7672293271 7672693591
25 80 - 250 7672291681 7672693611
25 300 - 900 7672293301 7672693621
25 1050 - 1200 7672293311 7672693631
40 80 - 80 7672293321 7672693651
40 100 - 100 7672293331 7672693661
40 150 - 200 7672293341 7672693671
40 250 - 450 7672293351 7672693681
40 500 - 900 7672293361 7672693691
40 1050 - 1200 7672293371 7672693701
50 150 - 150 7678311471
50 200 - 250 7678311481
50 300 - 450 7678311501
50 500 - 900 7678311541
50 1050 - 1200 7678901131
80 200 - 200 7678311581
80 250 - 250 7678311591
80 300 - 350 7678311601
80 400 - 500 7678311621
80 600 - 600 7678311651
80 750 - 900 7678901201
80 1050 - 1200 7678901261

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:58:14
 DEP 31.38.01.15-Gen Class 11432, rev. H Page 11 of 15

REDUCING/PIPING COMPONENTS

Branch Run pipe BN6F BN6P BR3B BROB BRSB

100 300 - 350 7678312391
100 400 - 500 7678312411
100 600 - 900 7678312441
100 1050 - 1200 7678901391
150 350 - 350 7678312471
150 400 - 400 7678312481
150 450 - 450 7678312491
150 500 - 500 7678312501
150 600 - 600 7678312511
150 750 - 750 7678902461
150 900 - 900 7678902491
150 1050 - 1200 7678901521
200 400 - 400 7679001081
200 450 - 450 7679001091
200 500 - 500 7678310481
200 600 - 600 7678310491
200 750 - 750 7678037591
200 900 - 900 7678037621
200 1050 - 1050 7678001651
200 1200 - 1200 7678005681
250 500 - 500 7678310541
250 600 - 600 7678310551
250 750 - 750 7678037721
250 900 - 900 7678037751
250 1050 - 1050 7678001781
250 1200 - 1200 7678005811
300 750 - 750 7678037801
300 900 - 900 7678037851
300 1050 - 1050 7678001821
300 1200 - 1200 7678005831
350 750 - 750 7678030541
350 900 - 900 7678030551
350 1050 - 1050 7678000861
350 1200 - 1200 7678004851
400 900 - 900 7678030591
400 1050 - 1050 7678000901
400 1200 - 1200 7678004871
450 1050 - 1050 7678000941
450 1200 - 1200 7678004891
500 1050 - 1050 7678000971
500 1200 - 1200 7678004971

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:58:14
 DEP 31.38.01.15-Gen Class 11432, rev. H Page 12 of 15

BOLTING

Coated boltset std flange Std boltset mrun flg Coated boltset blind/spc
DN nr inch x mm MESC number DN nr inch x mm MESC number DN nr inch x mm MESC number
15 4 1/2 x 60 8138150231 15 4 5/8 x 130 8138612781 15 4 1/2 x 70 8138150251
20 4 1/2 x 70 8138150251 20 4 5/8 x 130 8138612781 20 4 1/2 x 80 8138150271
25 4 1/2 x 70 8138150251 25 4 5/8 x 130 8138612781 25 4 1/2 x 80 8138150271
40 4 1/2 x 80 8138150271 40 4 3/4 x 140 8138613351 40 4 1/2 x 80 8138150271
50 4 5/8 x 90 8138150751 50 4 5/8 x 100 8138150771
80 4 5/8 x 100 8138150771 Coated boltset orificeflg 80 4 5/8 x 110 8138150791
100 8 5/8 x 100 8138150771 DN nr inch x mm MESC number 100 8 5/8 x 110 8138150791
150 8 3/4 x 110 8138151431 50 8 5/8 x 130 8138150831 150 8 3/4 x 120 8138151451
200 8 3/4 x 110 8138151431 80 8 3/4 x 140 8138151491 200 8 3/4 x 130 8138151471
250 12 7/8 x 120 8138152161 100 8 3/4 x 150 8138151511 250 12 7/8 x 140 8138152201
300 12 7/8 x 120 8138152161 150 12 3/4 x 150 8138151511 300 12 7/8 x 150 8138152221
350 12 1 x 140 8138152991 200 12 7/8 x 170 8138152261 350 12 1 x 170 8138153051
400 16 1 x 140 8138152991 250 16 1 x 190 8138153091 400 16 1 x 170 8138153051
450 16 1 1/8 x 150 8138153841 300 16 1 1/8 x 210 8138153961 450 16 1 1/8 x 180 8138153901
500 20 1 1/8 x 160 8138153861 350 20 1 1/8 x 220 8138153981 500 20 1 1/8 x 200 8138153941
600 20 1 1/4 x 180 8138154701 400 20 1 1/4 x 230 8138154801 600 20 1 1/4 x 220 8138154781
750 28 1 1/4 x 240 8138154821 450 24 1 1/4 x 250 8138154841 750 28 1 1/4 x 280 8138154901
900 32 1 1/2 x 290 8138156411 500 24 1 1/4 x 260 8138154861 900 32 1 1/2 x 340 8138156511
1050 36 1 1/2 x 300 8138156431 600 24 1 1/2 x 290 8138156411 1050 36 1 1/2 x 360 8138156551
1200 44 1 1/2 x 320 8138156471 1200 44 1 1/2 x 390 8138156611
Std boltset orifice flg
Std boltset standard flg DN nr inch x mm MESC number Std boltset blind/spacer
DN nr inch x mm MESC number 50 8 5/8 x 130 8138612781 DN nr inch x mm MESC number
15 4 1/2 x 60 8138611531 80 8 3/4 x 140 8138613351 15 4 1/2 x 70 8138611551
20 4 1/2 x 70 8138611551 100 8 3/4 x 150 8138613371 20 4 1/2 x 80 8138611571
25 4 1/2 x 70 8138611551 150 12 3/4 x 150 8138613371 25 4 1/2 x 80 8138611571
40 4 1/2 x 80 8138611571 200 12 7/8 x 170 8138614091 40 4 1/2 x 80 8138611571
50 4 5/8 x 90 8138612711 250 16 1 x 190 8138614771 50 4 5/8 x 100 8138612731
80 4 5/8 x 100 8138612731 300 16 1 1/8 x 210 8138615381 80 4 5/8 x 110 8138612741
100 8 5/8 x 100 8138612731 350 20 1 1/8 x 220 8138615401 100 8 5/8 x 110 8138612741
150 8 3/4 x 110 8138613301 400 20 1 1/4 x 230 8138615981 150 8 3/4 x 120 8138613321
200 8 3/4 x 110 8138613301 450 24 1 1/4 x 250 8138615861 200 8 3/4 x 130 8138613341
250 12 7/8 x 120 8138614011 500 24 1 1/4 x 260 8138616031 250 12 7/8 x 140 8138614041
300 12 7/8 x 120 8138614011 600 24 1 1/2 x 290 8138617121 300 12 7/8 x 150 8138614061
350 12 1 x 140 8138614691 350 12 1 x 170 8138614741
400 16 1 x 140 8138614691 Std boltset monoflg. ball 400 16 1 x 170 8138614741
450 16 1 1/8 x 150 8138615291 DN nr inch x mm MESC number 450 16 1 1/8 x 180 8138615331
500 20 1 1/8 x 160 8138615301 15 4 1/2 x 80 8138611571 500 20 1 1/8 x 200 8138615251
600 20 1 1/4 x 180 8138615901 20 4 1/2 x 70 8138611551 600 20 1 1/4 x 220 8138615971
750 28 1 1/4 x 240 8138616001 750 28 1 1/4 x 290 8138616081
900 32 1 1/2 x 290 8138617121 Std boltset monoflg.sliml 900 32 1 1/2 x 340 8138617021
1050 36 1 1/2 x 300 8138616961 DN nr inch x mm MESC number 1050 36 1 1/2 x 360 8138617131
1200 44 1 1/2 x 330 8138617171 15 4 1/2 x 100 8138611611 1200 44 1 1/2 x 390 8138617151
20 4 1/2 x 100 8138611611
Coated boltset mrun flg
DN nr inch x mm MESC number
15 4 5/8 x 130 8138150831
20 4 5/8 x 130 8138150831
25 4 5/8 x 130 8138150831
40 4 3/4 x 140 8138151491

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:58:14
 DEP 31.38.01.15-Gen Class 11432, rev. H Page 13 of 15

ASSEMBLIES PI.conn.monofl.sliml DN 20 Fig.AB DN20 - 40

Branch: according to branch table
Drain or vent point DN 15 Fig.I DN15 - 15 Orif conn.monof.ball DN 15 Fig.AB DN50 - 600 Welding neck flange 1 7662784041
Branch: according to branch table Branch: not applicable Gasket spiral wound 1 8541363061
Blind flange 1 7662110581 Welding neck flange 2 7662784021 Monofl Slimline SBB G 1/2 TubF 1 7785599201
Welding neck flange 1 7662784021 Gasket spiral wound 2 8541363041 Studbolt with nuts 4 8138611611
Gasket spiral wound 1 8541363041 Monofl ball SBB G 1/2 Tub F 2 7785588701
Studbolt with nuts 4 8138611531 Studbolt with nuts 8 8138611571 Temp instr conn DN 50 Fig.HS DN80 - 100
Branch: according to branch table
Drain or vent point DN 20 Fig.H DN50 - 50 Orif conn.monof.slim DN 15 Fig.AB DN50 - 600 Lap joint flange 1 7662202201
Branch: branch nipple flanged Branch: not applicable Pipe 1 7430050711
Blind flange 1 7662110621 Welding neck flange 2 7662784021 Welding neck flange 1 7662783601
Gasket spiral wound 1 8541363061 Gasket spiral wound 2 8541363041 Gasket spiral wound 1 8541363141
Studbolt with nuts 4 8138611551 Monofl Slimline SBB G 1/2 TubF 2 7785598701 Thermowell flgd DN 50 L=230 mm 1 7683385611
Studbolt with nuts 8 8138611611 Studbolt with nuts 4 8138612741
Drain or vent point DN 20 Fig.I DN20 - 40
Branch: according to branch table PI.conn.monofl.ball. DN 15 Fig.AB DN15 - 15 Temp instr conn DN 50 Fig.HL DN150 - 1200
Blind flange 1 7662110621 Branch: according to branch table Branch: according to branch table
Welding neck flange 1 7662784041 Welding neck flange 1 7662784021 Lap joint flange 1 7662202201
Gasket spiral wound 1 8541363061 Gasket spiral wound 1 8541363041 Pipe 1 7430050711
Studbolt with nuts 4 8138611551 Monofl ball SBB G 1/2 Tub F 1 7785588701 Welding neck flange 1 7662783601
Studbolt with nuts 4 8138611571 Gasket spiral wound 1 8541363141
Drain or vent point DN 25 Fig.H DN80 - 300 Thermowell flgd DN 50 L=255 mm 1 7683385621
Branch: branch nipple flanged PI.conn.monofl.ball. DN 20 Fig.AB DN20 - 40 Studbolt with nuts 4 8138612741
Blind flange 1 7662110661 Branch: according to branch table
Gasket spiral wound 1 8541363081 Welding neck flange 1 7662784041
Studbolt with nuts 4 8138611551 Gasket spiral wound 1 8541363061
Monofl ball SBB G 1/2 Tub F 1 7785589201
Drain or vent point DN 40 Fig.H DN350 - 1200 Studbolt with nuts 4 8138611551
Branch: branch nipple flanged
Blind flange 1 7662110681 PI.conn.monofl.ball. DN 20 Fig.AA DN50 - 1200
Gasket spiral wound 1 8541363121 Branch: branch nipple flanged
Studbolt with nuts 4 8138611571 Gasket spiral wound 1 8541363061
Monofl ball SBB G 1/2 Tub F 1 7785589201
Mrun conn.monof.ball DN 15 Fig.AA DN15 - 40 Studbolt with nuts 4 8138611551
Branch: not applicable
Gasket spiral wound 2 8541363041 PI.conn.monofl.sliml DN 15 Fig.AB DN15 - 15
Monofl ball SBB G 1/2 Tub F 2 7785588701 Branch: according to branch table
Studbolt with nuts 8 8138611571 Welding neck flange 1 7662784021
Gasket spiral wound 1 8541363041
Mrun conn.monof.slim DN 15 Fig.AA DN15 - 40 Monofl Slimline SBB G 1/2 TubF 1 7785598701
Branch: not applicable Studbolt with nuts 4 8138611611
Gasket spiral wound 2 8541363041
Monofl Slimline SBB G 1/2 TubF 2 7785598701 PI.conn.monofl.sliml DN 20 Fig.AA DN50 - 1200
Studbolt with nuts 8 8138611611 Branch: branch nipple flanged
Gasket spiral wound 1 8541363061
Monofl Slimline SBB G 1/2 TubF 1 7785599201
Studbolt with nuts 4 8138611611

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:58:14
 DEP 31.38.01.15-Gen Class 11432, rev. H Page 14 of 15

ALTERNATIVE COMPONENT MATERIAL DESCRIPTION (SOCKET WELDED) ALTERNATIVE PIPING COMPONENTS (SOCKET WELDED)
(For full material description see relevant MESC buying description.) Nominal pipe size
15 20 25 40 50 80 100 150
Flanges Item description MESC

FLWS Flange sw DN 15-50 ASTM A105 Flanges

Fittings Flange sw 766270 3011 3021 3031 3041 2051

CAS3 Cap sw cl 3000 DN 50-50 ASTM A105 Fittings

CAS6 Cap sw cl 6000 DN 15-40 ASTM A105
COS3 Coupling sw cl 3000 DN 50-50 ASTM A105 Cap sw cl 3000 763422 0201
COS6 Coupling sw cl 6000 DN 15-40 ASTM A105 Cap sw cl 6000 763422 1081 1121 1161 1181
E4S3 Elbow 45 deg sw cl 3000 DN 50-50 ASTM A105 Coupling sw cl 3000 763426 0201
E4S6 Elbow 45 deg sw cl 6000 DN 15-40 ASTM A105 Coupling sw cl 6000 763426 1081 1121 1161 1181
E9S3 Elbow 90 deg sw cl 3000 DN 50-50 ASTM A105 Elbow 45 deg sw cl 3000 763435 0201
E9S6 Elbow 90 deg sw cl 6000 DN 15-40 ASTM A105 Elbow 45 deg sw cl 6000 763435 1081 1121 1161 1181
TES3 Tee equal sw cl 3000 DN 50-50 ASTM A105 Elbow 90 deg sw cl 3000 763435 5201
TES6 Tee equal sw cl 6000 DN 15-40 ASTM A105 Elbow 90 deg sw cl 6000 763435 6081 6121 6161 6181
UNS3 Union sw cl 3000 DN 50-50 ASTM A105 Tee equal sw cl 3000 763480 0201
UNS6 Union sw cl 6000 DN 15-40 ASTM A105 Tee equal sw cl 6000 763480 1081 1121 1161 1181
Union sw cl 3000 763485 0201
Reducing fittings Union sw cl 6000 763485 1081 1121 1161 1181

B3ST Bosset sw x thrd DN 80-1200 ASTM A105 Valves

B6ST Bosset sw x thrd DN 40-1200 ASTM A105
BR3S Branch outlet sw DN 80-1200 ASTM A105 Check valve sw 771107 1531 1541 1551 1571 1581
BR6S Branch outlet sw DN 40-1200 ASTM A105 Gate valve sw 772107 1531 1541 1551 1571 1581
CRS6 Coupling reducing sw cl 6000 DN 20-50 ASTM A105 Gate valve sw x thrd 772170 1531 1541 1551 1571 1581
IRS6 Insert reducing sw cl 6000 DN 20-50 ASTM A105 Globe valve sw 773107 1531 1541 1551 1571 1581
SCBP Swage concentric bw x plain DN 80-100 ASTM A234-WPB Globe valve sw x thrd 773170 1531 1541 1551 1571 1581
SEBP Swage eccentric bw x plain DN 80-100 ASTM A234-WPB
TRS6 Tee reducing sw cl 6000 DN 20-50 ASTM A105 Miscellaneous

Valves Plug Bosset sw x thrd 768066 8081 8121 8161 8181 8201

CHVS Check valve sw DN 15-50 Body: ASTM A105

Trim: AISI 410
GAST Gate valve sw x thrd DN 15-50 Body: ASTM A105 (Normalised) Trim: AISI
410/ Stellite 6
GAVS Gate valve sw DN 15-50 Body: ASTM A105 (Normalised) Trim: AISI
410/ Stellite 6
GLST Globe valve sw x thrd DN 15-50 Body: ASTM A105 (Normalised) Trim: AISI
410/ Stellite 6
GLVS Globe valve sw DN 15-50 Body: ASTM A105 (Normalised) Trim: AISI
410/ Stellite 6

Miscellaneous

BPST Plug Bosset sw x thrd DN 15-50 ASTM A105

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:58:14
 DEP 31.38.01.15-Gen Class 11432, rev. H Page 15 of 15

Branch Run pipe B3ST B6ST BR3S BR6S

15 40 - 50 7680662021 7673100601
15 80 - 150 7680662041 7673100621
15 200 - 900 7680662061 7673100641
15 1050 - 1200 7680662081 7673100651
20 50 - 50 7680662101 7673100661
20 80 - 250 7680662121 7673100681
20 300 - 900 7680662141 7673100701
20 1050 - 1200 7680662161 7673100711
25 80 - 250 7680662181 7673100721
25 300 - 900 7680662201 7673100741
25 1050 - 1200 7680662221 7673100751
40 80 - 80 7680662241 7673100761
40 100 - 100 7680662261 7673100781
40 150 - 200 7680662281 7673100801
40 250 - 450 7680662301 7673100821
40 500 - 900 7680662321 7673100841
40 1050 - 1200 7680662341 7673100851
50 80 - 80 7680661461 7673100461
50 100 - 100 7680661481 7673100481
50 150 - 150 7680661501 7673100501
50 200 - 250 7680661521 7673100521
50 300 - 450 7680661541 7673100541
50 500 - 900 7680661561 7673100561
50 1050 - 1200 7680661581 7673100581
ALTERNATIVE REDUCING/PIPING COMPONENTS (SOCKET WELDED)

Run x Br CRS6 IRS6 SCBP SEBP TRS6

20 x 15 7634275061 7634405061 7634815061
25 x 15 7634275231 7634405231 7634815231
25 x 20 7634275251 7634405251 7634815251
40 x 15 7634275331 7634405331
40 x 20 7634275351 7634405351 7634815351
40 x 25 7634275371 7634405371 7634815371
50 x 15 7634275431 7634405431
50 x 20 7634275451 7634405451
50 x 25 7634275471 7634405471 7634815471
50 x 40 7634275491 7634405491 7634815491
80 x 40 7625601831 7625801831
80 x 50 7625601941 7625801941
100 x 40 7625602291 7625802291
100 x 50 7625602491 7625802491

This document has been supplied under license by Shell to: Metric units
UOP Honeywell ted.fuger@honeywell.com 24/01/2018 01:58:14