Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Extract From The Online Catalog: QUINT-PS-100-240AC/24DC/20

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

QUINT-PS-100-240AC/24DC/20

Please note that the data given here has been taken from the online catalog. For comprehensive information and
data, please refer to the user documentation at http://www.download.phoenixcontact.com. The General Terms
and Conditions of Use apply to Internet downloads.

Extract from the online catalog

DIN rail power supply unit 24 V DC/20 A, primary


switched-mode, 1-phase

Order No. 2938620


Ord designation QUINT-PS-100-240AC/24DC/20

EAN 4017918890544
Pack 1 Pcs.
Customs tariff 85044081
Weight/Piece 3,2925 KG
Catalog page information Page 413 (IF-2005)

Technical data

PHOENIX CONTACT GmbH & Co. KG Page 1/6


http://www.phoenixcontact.com Apr 21, 2006
QUINT-PS-100-240AC/24DC/20

Product description
QUINT POWER is the high-capacity DC current supply of 60 - 960 watts for universal use worldwide. This is
ensured by the wide-range input, one and three-phase versions as well as an international approval package that
has yet to be matched. QUINT POWER stands for guaranteed supply: Generously dimensioned capacitors
guarantee a mains buffering of more than 20 ms under full load. All three-phase devices provide the full output
power, even in the event of a continuous phase failure. The Power Boost power reserve easily starts loads with
high inrush currents and ensures that fuses are reliably triggered. A preventive function monitoring diagnoses
improper operating states and minimizes downtime in your system. Remote monitoring is provided by an active
transistor switching output and a floating relay contact. All devices are protected against idling and short circuits
and are available with a regulated and adjustable output voltage of 12, 24 and 48 volts DC with output currents of
2.5, 5, 10, 20, 30 and 40 A. The comprehensive range of products is rounded off by power supplies for use in the
Ex zone 2, uninterruptible solutions, AS-i power supplies and a Quint diode.

Input data
Nominal input voltage 100 V AC ... 240 V AC
AC input voltage range 85 V AC ... 264 V AC
DC input voltage range 90 V DC ... 350 V DC
AC frequency range 45 Hz ... 65 Hz
DC frequency range 0 Hz
Current consumption Approx. 4.76 A (at 120 V AC (nominal load))
Current consumption Approx. 2.3 A (at 230 V AC (nominal load))
Inrush surge current < 15 A (typical)
Power failure bypass > 30 ms (for 120 V AC)
Power failure bypass > 30 ms (for 230 V AC)
Input fuse 12 A (slow-blow, internal)
Name of protection Transient surge protection
Protective circuit/component Varistor

Output data
Nominal output voltage 24 V ±1%
Setting range of the output voltage 22.5 V DC ... 28.5 V DC
Output current 20 A (up to 60°C)
Output current 26 A (with POWER BOOST)
Connection in parallel Yes, for assembling redundant systems and increasing
efficiency
Max. capacitive load Unlimited
Current limitation Approx. IBOOST = 26 A (for short circuit)
Control deviation < 1 % (change in load, static 10% ... 90%)
Control deviation < 2 % (change in load, dynamic 10% ... 90%)
Control deviation < 0.1 % (change in input voltage ±10%)
Residual ripple SS (with nominal values)
Peak switching voltages nominal load SS (20 MHz)
Maximum power dissipation idling 3W
Power loss nominal load max. 44 W

PHOENIX CONTACT GmbH & Co. KG Page 2/6


http://www.phoenixcontact.com Apr 21, 2006
QUINT-PS-100-240AC/24DC/20

General data
Width 157 mm
Height 130 mm
Depth 125 mm
Weight 2.5 kg
Operating voltage display LED green
Efficiency > 92 %
Insulation voltage input/output 4 kV AC (type test)
Insulation voltage input/output 2 kV AC (routine test)
Degree of protection IP20
Class of protection Class 1, with PE connection
MTBF > 500 000 h in acc. with IEC 61709 (SN 29500)
Ambient temperature (operation) -25 °C ... 70 °C (> 60°C derating)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Max. permissible. relative humidity (operation) 95 % (at 25°C, no condensation)
Installation position On horizontal DIN rail NS 35 in acc. with EN 60715
Assembly instructions Can be aligned: Vertical with spacing = 8 cm
Approval UL
Approval GL
Standard - Electrical safety EN 60950/VDE 0805 (SELV)
Standard - Electrical safety EN 61558-2-17
Standard - Electrical safety CB scheme
Standard - Electrical safety UL/C-UL recognized UL 60950
Standard - Safe isolation DIN VDE 0100-410
Standard - Safe isolation DIN VDE 0106-1010
Electromagnetic compatibility Conformance with EMC directive 89/336/EEC
Emitted interference EN 50081-2
Immunity to interference EN 61000-6-2

Connection data, input


Type of connection Screw connection
Conductor cross section solid min. 0.2 mm
Conductor cross section solid max. 6 mm
Conductor cross section stranded min. 0.2 mm
Conductor cross section stranded max. 4 mm
Conductor cross section AWG/kcmil min. 24
Conductor cross section AWG/kcmil max 10
Stripping length 8 mm
Screw thread M3

Connection data, output


Type of connection Screw connection
2
Conductor cross section solid min. 0.5 mm
2
Conductor cross section solid max. 16 mm
2
Conductor cross section stranded min. 0.5 mm
2
Conductor cross section stranded max. 10 mm
Conductor cross section AWG/kcmil min. 20
Conductor cross section AWG/kcmil max 6
Stripping length 10 mm

PHOENIX CONTACT GmbH & Co. KG Page 3/6


http://www.phoenixcontact.com Apr 21, 2006
QUINT-PS-100-240AC/24DC/20

Signaling
Output name DC OK active
Output description UOUT > 0.9 x UN: High signal
Output voltage + 24 V DC (signal)
Continuous current Max. 40 mA
Status display LED green (Uout N: LED flashes)
Output name DC OK floating
Output description Relay contact, Uout >0.9 x UN: Contact closed
Continuous current Max. 1 A
Maximum switching voltage Max. 30 V AC/DC
Status display LED green (Uout N: LED flashes)

PHOENIX CONTACT GmbH & Co. KG Page 4/6


http://www.phoenixcontact.com Apr 21, 2006
QUINT-PS-100-240AC/24DC/20

Drawings

Block diagram

PHOENIX CONTACT GmbH & Co. KG Page 5/6


http://www.phoenixcontact.com Apr 21, 2006
QUINT-PS-100-240AC/24DC/20

Address

PHOENIX CONTACT GmbH & Co. KG


Flachsmarktstr. 8
32825 Blomberg
Germany
Phone +49 5235 3 00
Fax +49 5235 3 41200
http://www.phoenixcontact.com
Phoenix Contact
Technical modifications reserved;

PHOENIX CONTACT GmbH & Co. KG Page 6/6


http://www.phoenixcontact.com Apr 21, 2006

You might also like