GasStandards 15

Gas Reference Standards
Gas Regulators
Environmental Air Monitoring Gas Standards
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Scott/Air Liquide-meeting lab
requirements for two separate sources of calibration standards. Mixes are produced gravimetrically using NIST (National Institute of
Science and Technology) traceable weights. Each comes with a Certificate of Analysis and unique serial number. All cylinders are dis-
posable and do not require rental or demurrage fees. Recertification of cylinders is available directly with our suppliers. All cylinders
are drop-shipped from our suppliers to provide fast delivery and the "freshest" standard possible. 12-month stability on all cylinders
unless otherwise specified.
TO-14A Calibration Mix (39components) TO-14A 43 Component Mix (43components)

benzene ethyl chloride acrylonitrile ethyl benzene
bromomethane hexachloro-1,3-butadiene benzene ethyl chloride
carbon tetrachloride methylene chloride bromomethane 4-ethyltoluene
chlorobenzene styrene 1,3-butadiene hexachloro-1,3-butadiene
chloroform 1,1,2,2-tetrachloroethane carbon tetrachloride methylene chloride
chloromethane tetrachloroethylene chlorobenzene styrene
1,2-dibromoethane toluene chloroform 1,1,2,2-tetrachloroethane
m-dichlorobenzene 1,2,4-trichlorobenzene chloromethane tetrachloroethylene
a-dichlorobenzene 1,1,1-trichloroethane 3-chloropropene toluene
p-dichlorobenzene 1,1,2-trichloroethane 1,2-dibromoethane 1,2,4-trichlorobenzene
dichlorodifluoromethane trichloroethene m-dichlorobenzene 1,1,1-trichloroethane
1,1-dichloroethane trichlorofl uoromethane a-dichlorobenzene 1,1,2-trichloroethane
1,2-dichloroethane 1,l,2-trichlorotrifluoroethane p-dichlorobenzene trichloroethene
1,1-dichloroethene 1,2,4-trimethylbenzene dichlorodifluoromethane trichlorofluoromethane
cis-1,2-dichloroethene 1,3,5-trimethylbenzene 1,1-dichloroethane 1,1,2-trichlorotrifluoroethane
1,2-dichloropropane vinyl chloride 1,2-dichloroethane 1,2,4-trimethylbenzene
cis-1,3-dichloropropene m-xylene 1,1-dichloroethene 1,3,5-trimethylbenzene
trans-1,3-dichloropropene a-xylene cis-1,2-dichloroethene vinyl chloride
dichlorotetrafluoroethane p-xylene 1,2-dichloropropane m-xylene
ethyl benzene cis-1,3-dichloropropene a-xylene
1ppm innitrogen, 104 liters @ 1,800psi trans-1,3-dichloropropene p-xylene
cat. # 34400 (ea.) dichlorotetrafluoroethane
1ppm in nitrogen, 104 liters @ 1,800psi
100ppb in nitrogen, 104 liters@ 1,800psi
cat. # 34432 ea.)
cat. # 34421 (ea.)
1ppm in nitrogen, no liters @ 1,BOOpsi (Pi-marked Cylinder)
1ppm innitrogen, no liters @ 1,800psi (Pi-marked Cylinder)
_ _ _ _ _ _ _ _~ca==t.'""#~ 34~40 ~0~-PI~~ (e~ a.}'_ _ cat. # 34432-PI (ea.)
100ppb in nitrogen, 104 liters @ 1,800psi
100ppb in nitrogen, no liters@ 1,800psi (Pi-marked Cylinder)
_ _ _ _ _ _ _ _..:::ca:::.t.:...:#'-"-
34""'
4""21=--:...:
PI~ (e=a .}'_ _ cat. # 34433 (ea.)
100ppb in nitrogen, no liters @ 1,BOOpsi (Pi-marked Cylinder)
TO-14A41 Component Mix (41 components)

acrylonitrile
benzene
bromomethane
1,3-butadiene
carbon tetrachloride
ethyl benzene
ethyl chloride
hexachloro-1,3-butadiene
methylene chloride
styrene
2nd Source TO-14AITO-15
cat. # 34433-PI (ea.)
n
chlorobenzene 1,l,2,2-tetrachloroethane Gas Calibration Standards
chloroform tetrachloroethylene
chloromethane toluene
1,2-dibromoethane 1,2,4-trichlorobenzene • Standards from TWO manufacturers provide
m-dichlorobenzene 1,1,1-trichloroethane second source on one order.
a-dichlorobenzene 1,1,2-trichloroethane
p-dichlorobenzene trichloroethene • 12 month stability in transportable cylinders.
dichlorodifluoromethane trichlorofluoromethane • Drop shipped for fast delivery and maximum shelf life.
1,1-dichloroethane 1,l,2-trichlorotrifluoroethane
1,2-dichloroethane 1,2,4-trimethylbenzene
1,1-dichloroethene 1,3,5-trimethylbenzene A. Spectra (Linde)
cis-1,2-dichloroethene vinyl chloride 104L Cylinders
1,2-dichloropropane m-xylene
cis-1,3-dichloropropene a-xylene B. Scotty (Air Liquide)
trans-1,3-dichloropropene p-xylene
dichlorotetrafluoroethane
11OLCylinders
1ppm in nitrogen, 104 liters@ 1,800psi (Pi-marked Cylinders
cat. # 34430 (ea.) for EU Regulations)
1ppm in nitrogen, no liters@ 1,800psi (Pi-marked Cylinder)
_ _ _ _ _ _ _ _~ca==t.'""#~ 344= 30~-~ PI~"' ea~.}'_ _ For regulators,
100ppb in nitrogen, 104 liters @ 1,800psi see page 433.
cat. # 34431 (ea.)
100ppb in nitrogen, no liters @ 1,800psi (Pi-marked Cylinder)
_ _ _ _ _ _ _ _..:::ca:::.t.:...:#'-"-
344.:.=
31=--:...:
PI'-"'e=a.}'_ _
please note
Gas standardsare subject to hazardousmaterials shipping fees by most For more available gas standards,
freight carriers. All calibration gas standardsare nonreturnable due to
DOThazardousshipping requirements. visit www.restek.com/air
~. A"."oJIIlIn OJ."/bu,.,,..
"'/01' 876% 2034
RESTEK hJr~"' 4'N.. ",I'NI'f'U~"
wwv cbrulUf*rh.nrf,JIU
l~z www.restek.com 427
Website: www.chromtech.net.au E-mail: info@chromtech.net.au TelNo: 0397622034 ... in AUSTRALIA Mar 2011
TO-14A GC/MS Tuning Mix TO-15 Subset 25 Component Mix (25 components)
4-bromofluorobenzene acetone 4-ethyltoluene
Ipprn in nitrogen, 104 liters @ 1,800psi allyl chloride heptane
cat. # 34406 (ea) benzyl chloride* hexane
Ipprn in nitrogen, no liters @ 1,800psi (Pi-marked Cylinder) bromodichloromethane 2-hexanone (MBK)
cat. # 34406-PI (ea.) bromoform 4-methyl-2-pentanone
1,3-butadiene methyl tert-butyl ether(MTBE)
100ppb in nitrogen, 104liters @ 1,800psi
2-butanone (MEK) 2-propanol
cat. # 34424 (ea.) carbon disulfide* propylene
100ppb in nitrogen, no liters @ 1,800psi (Pi-marked Cylinder) cyclohexane tetrahydrofuran
cat. # 34424-PI (ea.) dibromochloromethane 2,2,4-trimethylpentane
trans-l,2-dichloroethene vinyl acetate
l,4-dioxane vinyl bromide
TO-14A Aromatics Mix (14 components) ethyl acetate
benzene toluene Ippmin nitrogen, 104 liters @ 1,800psi
chlorobenzene 1,2,4-trichlorobenzene cat. # 34434 (ea.)
m-dichlorobenzene 1,2,4-trimethylbenzene Ippmin nitrogen, no liters @ 1,800psi (Pi-marked Cylinder)
o-dichlorobenzene 1,3,5-trimethylbenzene
cat. # 34434-PI (ea.)
p-dichlorobenzene m-xylene
ethyl benzene o-xylene 100ppb in nitrogen, 104 liters @ 1,800psi
styrene p-xylene cat. # 34435 (ea.)
Ippmin nitrogen, 104 liters @ 1,800psi
cat. # 34435-PI (~)~ _
cat. # 34404 (ea.)
Ipprn in nitrogen, no liters @ 1,800psi (Pi-marked Cylinder) *Stabilityof this compound cannot beguaranteed.
cat. # 34404-PI (ea.)
100ppb in nitrogen, 104liters @ 1,800psi TO-15 65 Component Mix (65 components)
cat. # 34423 (ea.)
100ppb in nitrogen, no liters @ 1,800psi (Pi-marked Cylinder) acetone 1,2-dichlorotetrafluoroethane
acrolein (Freon 114)
cat. # 34423-PI (ea.)
benzene heptane
benzyl chloride* hexachloro-l,3-butadiene
TO-14A Chlorinated Hydrocarbon Mix (19 components) bromodichloromethane hexane
bromoform 2-hexanone (MBK)
carbon tetrachloride hexachloro-l,3-butadiene bromomethane 4-methyl-2-pentanone (MIBK)
chloroform methyl chloride 1,3-butadiene methylene chloride
l,l-dichloroethane methylene chloride 2-butanone (MEK) methyl tert-butyl ether(MTBE)
1,2-dichloroethane 1,1,2,2-tetrachloroethane carbon disulfide* methyl methacrylate
l,l-dichloroethene tetrachloroethylene carbon tetrachloride naphthalene
cis-l,2-dich loroethylene l,l,l-trichloroethane chlorobenzene 2-propanol
1,2-dichloropropane 1,1,2-trichloroethane chloroethane propylene
n
cis-l,3-dichloropropene trichloroethene chloroform styrene
trans-l,3-dichloropropene vinyl chloride chloromethane 1,1,2,2-tetrachloroethane
ethyl chloride cyclohexane tetrachloroethene
Ipprn in nitrogen, 104 liters @ 1,800psi dibromochloromethane tetrahydrofuran
cat. # 34402 (ea.) 1,2-dichlorobenzene toluene
Ippmin nitrogen, no liters @ 1,800psi (Pi-marked Cylinder) 1,3-dichlorobenzene 1,2,4-trichlorobenzene
cat. # 34402-PI (~), _ l,4-dichlorobenzene l,l,l-trichloroethane
l,l-dichloroethane 1,1,2-trichloroethane
100ppb in nitrogen, 104liters @ 1,800psi 1,2-dichloroethane trichloroethene
cat. # 34422 (ea.) l,l-dichloroethene 1,2,4-trimethylbenzene
100ppb in nitrogen, no liters @ 1,800psi (Pi-marked Cylinder) cis-l,2-dichloroethene 1,3,5-trimethylbenzene
cat. # 34422-PI (ea.) trans-l,2-dichloroethene vinyl acetate ~-----_
1,2-dichloropropane vinyl chloride Now with
cis-l,3-dichloropropene m-xylene
TO-14A Internal Standard Mix (3 components) trans-l,3-dichloropropene o-xylene Naphthalene!
bromochloromethane 1,4-difluorobenzene l,4-dioxane p-xylene
chlorobenzene-d5 ethanol*
ethyl acetate
Ippmin nitrogen, 104 liters @ 1,800psi ethyl benzene
cat. # 34412 (ea.) ethylene dibromide
Ipprn in nitrogen, no liters @ 1,800psi (Pi-marked Cylinder) (1,2-dibromoethane)
cat. # 34412-PI (ea.) 4-ethyltoluene
100ppb in nitrogen, 104liters @ 1,800psi trichlorofluoromethane (Freon 11)
cat. # 34427 (ea.) dichlorodifluoromethane (Freon 12)
100ppb in nitrogen, no liters @ 1,800psi (Pi-marked Cylinder) 1,1,2-trichloro-l,2,2-trifluoroethane
(Freon un
cat. # 34427-PI (ea.)
Ippmin nitrogen, 104 liters@ 1,800psi
cat. # 34436 (ea.)
TO-14A Internal StandardlTuning Mix (4 components)
Ippmin nitrogen, no liters@ 1,800psi (Pi-marked Cylinder)
bromochloromethane chlorobenzene-d5 cat. # 34436-PI (ea.)
I-bromo-4-fluorobenzene 1,4-difluorobenzene 100ppb in nitrogen, 104 liters @ 1,800psi
(4-bromofluorobenzene)
cat. # 34437 (ea.)
Ippmin nitrogen, 104 liters @ 1,800psi 100ppb in nitrogen, no liters @ 1,800psi (Pi-marked Cylinder)
cat. # 34408 (ea.) $690 cat. # 34437-PI (ea.
Ippmin nitrogen, no liters @ 1,800psi (Pi-marked Cylinder)
*Stability of this compound cannot beguaranteed.
cat. # 34408-PI (ea.)
100ppb in nitrogen, 104liters @ 1,800psi
cat. # 34425 ea.)
cat. # 34425-PI (ea.)
~,
428 www.restek.com RESTEK f/O! 87 2 :lO:l4

u«
Website: www.chromtech.net.au E-mail: info@chromtech.net.au Tel No: 0397622034 ... in AUSTRALIA Mar 2011
TO-14A1TO-15JTO-17 Performance Test Standard Sulfur 5-Component Mix (5 components)
Restekis pleased to offer the Performance cylinder 12-month stability. +/- 10% accuracy.
carbonyl sulfide hydrogen sulfide
TestingIVOC Audit Sample Program in dimethyl sulfide methyl mercaptan
cooperation with Spectra/Linde. This is design ethyl mercaptan
an on-going testing program in which Performance Ippmin nitrogen, no liters @ 1,800psi
Test Standard cat. # 34561 (ea.)
laboratories, and/or other users of VOC Ipprn in nitrogen, no liters @ 1,800psi (Pi-marked Cylinder)
standards, are able to evaluate their own Size: SA disposable _ _ _ _ _ _ _ _-"' ca""t.:...:#'-""34.:.5""
: 61
=..-:...:
PI'-"'ea.):
"" - _
capabilities, as well as compare their (3.2"x 12")
results and accuracy against other labora- Volume/Pressure:
150L@1,800psig Massachusetts APH Mix (26 components)
tories. As a participant in the program, Now with
CGA 180 outlet fitting benzene p-isopropyltoluene
you will receive a disposable cylinder, Weight: 2.21bs 1,3-butadiene methyl tert-butyl ether Naphthalene!
directly from Spectra/Linde, containing butylcyclohexane I-methyl-3-ethylbenzene
multiple unknown TO-14NTO-15 components at varying con- cyclohexane naphthalene
n-decane n-nonane
centrations that are to be identified, quantified, and reported via 2,3-dimethylheptane n-octane
the Spectra/Linde P-T Audit Program forms. The results will be 2,3-dimethylpentane toluene
n-dodecane 1,2,3-trimethylbenzene
published and distributed for peer review. To ensure confiden- ethylbenzene 1,3,5-trimethylbenzene
tiality, all participating laboratories will be anonymous, and only n-heptane n-undecane
the individual laboratory will know their own results. To provide n-hexane o-xylene
isopentane m/p-xylene (combined)
statistical analysis,the audit sample will be shipped to all labora- isopropylbenzene
tories at the same time, once a year during the fourth quarter. Ippmin nitrogen, 104 liters @ 1,800psi
150 liters @ 1,800psig cat. # 34540 (ea.)
cat. # 34560 (ea.) $1040 140-450ppb in nitrogen, 90liters @ 1,500psig (Pi-marked Cylinder)
cat. # 34540-PI (ea.)
BTEXGas Mix (6 components)

benzene m-xylene Japan Calibration Mix (9 components)
ethylbenzene o-xylene acrylonitrile dichloromethane
toluene p-xylene benzene tetrachloroethylene
Ipprn in nitrogen, 104 liters@ 1,800psi 1,3-butadiene trichloroethylene
cat. # 34414 (ea.) chloroform vinyl chloride
Ipprn in nitrogen, no liters@ 1,800psi (Pi-marked Cylinder) 1,2-dichloroethane
cat. # 34414-PI (ea.) Ipprn in nitrogen, 104 liters @ 1,800psi
n
100ppb in nitrogen, 104 liters @ 1,800psi cat. # 34418 (ea.)
cat. # 34428 (ea.) Ippmin nitrogen, no liters @ 1,800psi (Pi-marked Cylinder)
100ppb in nitrogen, no liters @ 1,800psi (Pi-marked Cylinder) cat. # 34418-PI (ea)
cat. # 34428-PI (ea.)
cylinder design
BTEXand MTBE Gas Mix (7 components) Spectra (Linde) Scotty (Air Liquide)
benzene m-xylene 104L Cylinders: 11OLCylinders
ethylbenzene o-xylene (Pi-marked Cylinders for
methyl tert-butyl ether(MTSE) p-xylene Aluminum construction
toluene EU Regulations):
Size: 8 x 24 cm
Ipprn in nitrogen, 104 liters@ 1,800psi Volume/Pressure: Aluminum construction
cat. # 34541 (ea.) 104 liters of gas Size: 8.3 x 29.5cm
Ippm in nitrogen, no liters@ 1,800psi (Pi-marked Cylinder) @l,800psi Volume/Pressure:
cat # 34541-PI (e""'a",..) _
CGA-180 110 liters of gas
100ppb in nitrogen, 104 liters @ 1,800psi
outlet fitting. @l,800psi
cat. # 34542 (ea.)
Weight: CGA-180 outlet fitting.
cat. # 34542-PI (ea.) 1.5 Ibs/0.7 kg Weight: 2.2 Ibs/l kg
See page 433 for regulators. USDOTSpecs: 3AL2216
Higher Concentration did you know?

Pi-marked Gas Cylinders for EUCountries
MORE STAN DARD for Our Pi-marked gas standards from Scott/Air Liquide meet the
requirements of the Transportable Pressure Equipment Directive (TPED)
your money! implemented in 2001 that regulates the safetransport of pressurized
containers used throughout the Europeancommunity.
please note Custom Gas Calibration

Gasstandards are subject to hazardous materials shipping fees by most
Standards Quote
freight carriers. All calibration gas standards are nonreturnable due to www.restek.com/customgas
DOThazardousshipping requirements.
·"/01' 876% 2034
Ozone Precursor Mixture/PAMS (57components) Ozone Precursor/PAMSMix
acetylene isopropylbenzene (57 components at EPA concentrations: ppbC)
benzene methylcyclohexane acetylene 40 isopropylbenzene 40
n-butane methylcyclopentane benzene 30 methylcyclohexane 30
I-butene 2-methylheptane n-butane 40 methylcyclopentane 25
cis-2-butene 3-methylheptane !-butene 30 2-methylheptane 25
trans-2-butene 2-methylhexane cis-2-butene 35 3-methylheptane 25
cyclohexane 3-methylhexane trans-2-butene 25 2-methylhexane 25
cyclopentane 2-methylpentane cyclohexane 40 3-methylhexane 25
n-decane 3-methylpentane cyclopentane 20 2-methylpentane 20
m-diethylbenzene n-nonane n-decane 30 3-methylpentane 40
p-diethylbenzene n-octane m-diethylbenzene 40 n-nonane 25
2,2-dimethylbutane n-pentane p-diethylbenzene 25 n-octane 30
2,3-dimethylbutane I-pentene 2,2-dimethylbutane 40 n-pentane 25
2,3-dimethylpentane cis-2-pentene 2,3-dimethylbutane 50 I-pentene 25
2,4-dimethylpentane trans-2-pentene 2,3-dimethylpentane 50 cis-2-pentene 35
n-dodecane propane 2,4-dimethylpentane 40 trans-2-pentene 25
ethane n-propylbenzene n-dodecane 40 propane 40
ethylbenzene propylene ethane 25 n-propylbenzene 30
ethylene styrene ethylbenzene 25 propylene 25
m-ethyltoluene toluene ethylene 20 styrene 40
o-ethyltoluene 1,2,3-trimethylbenzene m-ethyltoluene 25 toluene 40
p-ethyltoluene 1,2,4-trimethylbenzene o-ethyltoluene 30 1,2,3-trimethylbenzene 25
n-heptane 1,3,5-trimethylbenzene p-ethyltoluene 40 1,2,4-trimethylbenzene 40
n-hexane 2,2,4-trimethylpentane n-heptane 25 1,3,5-trimethylbenzene 25
l-hexene 2,3,4-trimethylpentane n-hexane 30 2,2,4-trimethylpentane 30
isobutane n-undecane I-hexene 60 2,3,4-trimethylpentane 25
isopentane o-xylene isobutane 25 n-undecane 30
isoprene rotp-xylene (combined) isopentane 40 o-xylene 25
Ipprn in nitrogen, 104 liters @ 1,BOOpsi isoprene 40 rotp-xylene (combined) 40
cat. # 34420 (ea.) 20-60ppbC in nitrogen, 104 liters @ 1,BOOpsi
lppm in nitrogen, 30liters @ 500psi (Pi-marked Cylinder) cat. # 34445 (ea.)
cat. # 34420-PI (ea.) 20-60ppbC in nitrogen, no liters @ 1,BOOpsi (Pi-marked Cylinder)
100ppb in nitrogen, 104 liters @ 1,BOOpsi cat. # 34445-PI (ea.) _
cat. # 34429 (ea.)
100ppb in nitrogen, no liters @ 1,BOOpsi (Pi-marked Cylinder)
cat. # 34429-PI (e
""a::L.) _
n 2nd Source TO-14AITO-15

Gas Calibration Standards
• Standards from TWO manufacturers provide
second source on one order.
• 12 month stability in transportable cylinders.
• Drop shipped for fast delivery and maximum shelf life.
A. Spectra (Linde)
104L Cylinders
B. Scotty (Air Liquide)
Small Cylinder Stand 11 OL Cylinders
• Supports and stabilizes disposable gas cylinders. (Pi-marked Cylinders
• Fits cylinders up to 3'1s" (8 em) in diameter. for EU Regulations)
• Adjustable screw secures cylinder in place. For regulators,
see page 433.
This cylinder stand is designed to support small diameter cylin-
ders, such as 104 L and 110 L disposable cylinders. It is a simple,
safe, and economical way to stabilize the position of small cylin-
ders, while keeping them within close proximity. The stand is
constructed of heavyweight painted steel and includes an
adjustable screw for safely securing cylinders.
For more available gas standards,
Descri tion cat# rice
Small Cylinder Stand 24129
visit www.restek.com/air
~.

u«
Natural Gas and Refinery Gas Standards
• Each available in three varying concentrations.
• Mini-regulator designed specially for these standards.
Natural Gas Standards

Availablein three mixes, from lean to rich. Each has an extended list of C6+ components.
Natural Gas Standard #2 Natural Gas Standard #3 please note
cal.# 34439, ea. cal.# 34440, ea.
% each compound** % each compound** Gas standardson this page are not available in
nitrogen 2.500 5.000 Pi-markedcylinders for EU countries.
carbon dioxide 1.000 1.500
methane UHP 85.250 70.000
ethane UHP 5.000 9.000
propane 3.000 6.000
isobutane 1.000 3.000
n-butane 1.000 3.000
isopentane 0.500 1.000
n-pentane 0.500 1.000
hexanes plus* 0.2S0 0.500
Concentration
Volume
IdealHeatin Value Dr
RefineryGas Standards
Available in three mixes with varying CS unsaturates or extended C6+ components.
Refinery Gas Standard #1 Refinery Gas Standard #2 Refinery Gas Standard #5
cal.# 34441, ea. cal.# 34442, ea. cal.# 34443, ea.
% each compound** % each compound** % each compound**
hydrogen 40.750 12.500 12.500
argon 0.500 1.000 1.000
nitrogen 4.000 37.200 37.200
carbon monoxide 1.000 1.000 1.000
carbon dioxide 3.000 3.000 3.000
methane 8.500 5.000 5.000
ethane
ethylene
acetylene
propane
propylene
propadiene
6.000
2.000
7.000
3.000
0.850
4.000
2.000
1.000
6.000
3.000
1.000
4.000
2.000
1.000
6.000
3.000
1.000 cylinder design
n
cyclopropane 0.040
isobutane 6.000 5.000 5.000
DCG Partnership Cylinders:
n-butane 4.000 4.000 4.000
isobutvlene 2.000 1.000 1.000 Size:7.6x 24 cm
1,3 butadiene 3.000 3.000 3.000 CGA-170/110 connection.
cis-2-butene 2.000 2.000 2.000 USDOTSpecs: DOT-4B-240ET
trans-2-butene 2.000 3.000 3.000 Please note: This cylinder is not approved for
butene-l 2.000 2.000 2.000 use in Canada.
2-methyl-2-butene 0.200 0.200
isopentane 1.000 1.000 1.000
n-pentane 1.000 1.000 1.000
cis-2-pentene 0.400 0.400
trans-2-pentene 0.160 0.200
pentene-l 0.400 0.400
n-hexane 0.500 0.100
hexanes plus 0.100
Concentration
Volume
mole
5.2L @Z!)psi 4.9L ~
mole mole
4.6L@60p",s",i_ _
also available
*ContactRestek or your Restek representative for a complete list of hexanes plus. Seepage 433 for regulators.
**Precise concentrations are provided on the datasheetincluded with each cylinder andmayvary slightly
from those listed here.
-"/01' 876% 2034
Scott/AirLiquideTransportable PureGases and Mixtures
We offer a wide range of ScottiAir Liquide transportable gases, from pure gases for purging or calibrating to multi-component mixes
which are ideal for peak identification work.
The 14-liter container has a CGA 160 connection for more precise integration with analytical systems. The 48-liter cylinder has a
CGA 165 connection, and can deliver large volumes of sample. The 110-liter cylinder has a CGA 180 connection.
See regulators pages 433-434 for cylinder information.

Scotty 14 Scotty 48 Scotty 110
Shelf (14Liter) (48Liter) (110 Liter)
Descriotion Life cat.# orice cat.# orice cat.# orice
Pure Gases
Air, zero (THC < Ippm) 2 yrs. 34448 34449 34449-PI
Argon, 99.995% 2 yrs. 34457 - - 34457-PI
Carbon dioxide, 99.80% 2 yrs. 34451 34452 34452-PI
Hydrogen, 99.99% 2 yrs. 34453 - - 34453-PI
Methane, 99.00% 2 yrs. 34454 - - 34454-PI
Oxygen, 99.60% 2 yrs. 34455 - - - -
Two-Component Mixtures
Benzene in air (lppm) 1 yr. - - 34458 34458-PI
Benzene in air (lOOppm) 1 yr. - - 34459 34459-PI
1,3-Butadiene in nitrogen (10ppm) 2 yrs. 34460 34461 34461-PI
Carbon dioxide in helium (lOOppm) 2yrs. 34462 - - 34462-PI
Carbon dioxide in nitrogen (lOOppm) 2 yrs. 34463 34464 34464-PI
Carbon dioxide in nitrogen (1000ppm) 2 yrs. 34465 34466 34466-PI
Ethylene in air (8-10ppm) 2 yrs. 34467 34468 34468-PI
Ethylene in helium (100ppm) 2 yrs. 34489 - - 34489-PI
Hydrogen in helium (lOOppm) 2 yrs. 34469 - - 34469-PI
Hydrogen in nitrogen (1%) 2 yrs. 34471 34472 34472-PI
Hydrogen in nitrogen (100ppm) 2 yrs. 34473 34474 34474-PI
Methane in helium (lOOppm) 2 yrs. 34476 34477 34477-PI
Methane in nitrogen (100ppm) 2 yrs. 34478 - - 34478-PI
n Methane in nitrogen (1%)

Nitrogen in helium (100ppm)
Nitrous oxide in nitrogen (lppm)
Oxygen in helium (100ppm)
Oxygen in nitrogen (2%)
Oxygen in nitrogen (6%)
2 yrs.
2 yrs.
2 yrs.
2 yrs.
2 yrs.
2 yrs.
34482
34479
34484
34480
34487
34491
34483
34485
34488
34492
-
-
-
-
34483-PI
34479-PI
34485-PI
34480-PI
34488-PI
34492-PI
1,1,I-Trichloroethane in nitrogen (lOppm) 2 yrs. - 34493 34493-PI
Trichloroethylene in nitrogen (10ppm) 2 yrs. 34494 34495 34495-PI
Vinyl chloride in nitrogen (lppm) 2 yrs. 34496 34497 34497-PI
Vinyl chloride in nitrogen (10ppm) 2 yrs. 34498 34499 34499-PI
Vinyl chloride in nitrogen (50ppm) 2 yrs. 34500 - - 34500-PI
Multi-Component Mixtures
Carbon monoxide, carbon dioxide, hydrogen and oxygen in nitrogen (0.5% each) 2 yrs. 34504 34505 34505-PI
Carbon monoxide, carbon dioxide, hydrogen and oxygen in nitrogen (1% each) 2 yrs. 34507 34508 34508-PI
Carbon monoxide, carbon dioxide, methane, ethane, ethylene and acetylene in nitrogen (1% each) 1 yr. - - 34511 34511-PI
Carbon monoxide, carbon dioxide, nitrogen, and oxygen, (5% each) and methane and hydrogen
2 yrs. 34512 - - 34512-PI
(4% each) in helium
Carbon monoxide (7%), carbon dioxide (15%) and oxygen (5%) in nitrogen 2 yrs. 34514 - - 34514-PI
Carbon monoxide (7%), oxygen (4%), carbon dioxide (15%) and methane (4.5%) in nitrogen 2 yrs. 34515 34516 34516-PI
CI-C6 n-Paraffins: methane, ethane, propane, butane, pentane, hexane in nitrogen (15ppm each) 2 yrs. 34518 34519 34519-PI
CI-C6 n-Paraffins: methane, ethane, propane, butane, pentane, hexane in helium (100ppm each) 2 yrs. 34521 34522 34522-PI
CI-C6 n-Paraffins: methane, ethane, propane, butane, pentane, hexane in helium (1000ppm each) 2 yrs. 34524 34525 34525-PI
CI-C6 n-Paraffins: methane, ethane, propane, butane, pentane, hexane in nitrogen (100ppm each) 2 yrs. 34527 34528 34528-PI
C2-C60Iefins: ethylene, propylene, I-butene, I-pentene, I-hexene in helium (100ppm each) 2 yrs. 34529 34530 34530-PI
C2-C60Iefins: ethylene, propylene, I-butene, I-pentene, I-hexene in nitrogen (lOOppmeach) 2 yrs. 34531 34532 34532-PI
Branched Paraffins: 2,2-dimethylbutane, 2,2-dimethylpropane, isobutane, 2-methylbutane,
2 yrs. 34534 - - 34534-PI
2-methylpentane, 3-methylpentane in nitrogen (15ppm each)
Methane, ethane, ethylene, acetylene, propane, propylene, n-butane, propyne in nitrogen
1 yr. - - 34537 34537-PI
(15ppm each)
n-butane, isobutane, cis-2-butene, trans-2-butene, l-butene, iso-butylene, 1,3-butadiene,
1 yr. - - 34539 34539-PI
ethyl acetylene in nitrogen (15ppm each)
~.

u«
Website: www.chromtech.net.au E-mail: info@chromtech.net.au Tel No: 0397622034 ... in AUSTRALIA Mar 2011
Gas Regulators for Transportable Cylinders
For this cylinder: Use this regulator:
DCG Partnership Cylinders: Mini-Regulator for natural gas and refinery gas standards
Size: 7.6 x 24 cm • 0-300 psig inlet pressure range.
CGA-170/110 connection. • 0-15 psig outlet pressure range.
US DOT Specs: DOT-4B-240ET • Supplied with 0-15 psig outlet pressure gauge, brass
CGA 170 nut and nipple.
Pleasenote: Thiscylinder is not
approved for use in Canada. Description gty. cat.# price
Mini-Regulator ea. 22032
For these cylinders:
Spectra (Linde) 104L: Scotty· (Air Liquide) 11OL

Aluminum construction (Pi-markedCylinders
Size:8 x 24 cm for EURegulations):
Volume/Pressure: Aluminum construction
104 liters of gas Size:8.3 x 29.5 cm
@ 1,800 psi Volume/Pressure:
n
CGA-180outlet fitting. 110 liters of gas @ 1,800 psi
Weight: 1.5 Ibs/O.7 kg CGA-180 outlet fitting.
Weight: 2.2 Ibs/l kg
DOTSpecifications: 3AL2216
Use these regulators:
Spectra Gas 7621 High-PurityVOC Regulator

• Single-stage, stainless steel.
• Two pressure gauges and CGA-IBO fitting.
• 3,000 psig maximum inlet pressure.
• Stainless steel diaphragm and Kel-F@ seat.
• lIs-inch tube compression outlet.
• Low internal volume: 3.03 cc.
• Accurate pressure control even at low flow rates.
• Individually tested for leaks and impurities.
21572
g • cat.# rice
ea. 21572
ea. 21572-R100
See nextpage for a syringe adapter kit.
Continued on next page.
-"/01' 876% 2034
RESTEK --......~==~~ hJr~"' 4'N.. ",I'NI'f'U~"
wwv cbrulU f*rh.nrf,JIU
Scotty" (Air Liquide) 14 Scotty" (Air Liquide) 48
Contents: 14 liters Contents: 48 liters
Pressure: 240 psig (17bar) Pressure: 300 psig (21 bar)
Outlet Fitting: CGA 160 Outlet Fitting: CGA 165
Weight: 1.5Ibs/O.7 kg Weight: 1.75 Ibs/0.8 kg
Dimensions: 3" diameter x Dimensions: 4" diameter x
11"height (7.6 x 28 cm) 16 'j," height (10.2 x 41em)
DOT Specifications: 48240 DOT Specifications: 39 NRC
Please note: This cylinder is not approved
for use in Canada.

Regulators
for use with 14-liter and 48-liter Scott (Air Liquide) Transportable Gases
Specifications: Materials of Construction:
Maximum Inlet Pressure: 300 psig Body: Brass
Outlet Pressure Range: 2-10 psig Diaphragm: Viton'"
Maximum Delivery Pressure: 25psig Seat: Acetal
Operating Temperature Range: Seal: Viton'"
35 OF to 150OF (2°C to 65 0c)
Outlet Connection: '1." female NPT
Use the CGA 160 inlet connection with 14-liter Scott/Air Liquide Transportable
Gases. Use the CGA 165 inlet connection with 48-liter Scott/Air Liquide
Transportable Gases.
Description gty. cat.# price
Regulator, CGA 160 InletConnection ea. 22690
Regulator, CGA 165 InletConnection
n
ea. 22691
Syringe Adapter Kitfor Single-Stage voe Regulator

Use to withdraw sample from a high-pressure cylinder after pressure reduction through
the high-purityVOC single-stage regulator.
Kit contains one nickel-plated brass 1/." NPT to female luer fitting, which can be used
with an A-2 Luer syringe (cat.# 20162 or 20163, see page 385), and one stainless steel
1/." NPT x 1/," compression fitting with septum (can be used with any syringe needle).
Description gty. cat.# price
SyringeAdapterKit kit 21118
21118
also available
Single-Stage and Dual-Stage
Ultra-High Purity Gas Regulators
Seepages 309-311.
~,

u«
Specialty Gas Product Specifications
It is the guiding principle of MESA Specialty Gases offers three types of product grade available for your calibration gas standard, Primary,
MESA Specialty Gas and Certified and Gravimetric Standards.
equipment to offer only the
highest quality calibration
gas products to our
The Primary Standard is the most accurate and is made by weight. Unless stated otherwise, the specialty gas
customers. mixture is certified to ± 1% analytical accuracy of the numbers reported.
The Certified Standard is made by a combination of pressure and/or weight measurements. Unless stated
otherwise, the calibration gas mixture is certified to ± 2% analytical accuracy of the numbers reported.
We recognize that only
excellent customer service
will allow our growth in this In the case of all specialty gas products, final calibration gas mixtures are analyzed by gas chromatography or
highly competitive other suitable analytical methodology to confirm they are within the allowed tolerances. All calibration gas
calibration gas industry. mixtures are supplied with a "Certificate of Analysis" that details the requested and analytical values as well as
preparative and analytical methods used by MESA Specialty Gases to prepare the calibration gas standard.
MESA Specialty Gas offers

technical support through
top experts in the field. Let STANDARD SPECIFICATIONS FOR CALIBRATION GAS, SPECIALTY
us know how we can assist
you.
GAS, NATURAL GAS, PETROCHEMICAL AND REFINERY GAS
STANDARDS
Product Grade Blend Tolerance Blend Tolerance (1) Certification Accuracy (1)
Primary Below 5 ppm (2) ±10 to 15% ±1 to 2%
5-100 ppm ±5% ±1%
101-5000 ppm ±5% ±1%
Above 0.5% ±5% ±1% (1)
Certified Below 5 ppm (2) ±15-20% ±2-5%
5-100 ppm ±10% ±2%
101-5000 ppm ±10% ±2%
Above 0.5% ±5% ±2%
Gravimetric (3) 0-100 ppm ±20% Non-Certified by independent
laboratory analysis.
101-5000 ppm ±10% Concentration Ranges are
reported based on the
Above 0.5% ±5% gravimetric values.
1. The Blend Tolerances and Certification Accuracy are expressed as the relative percentage deviation from
the requested concentration of the individual components. Certification Accuracy for Primary Standards
over 2% concentration will be ± 0.02% absolute of the reported value.
2. Tolerances of minor components below 5ppm may vary depending on the component and the complexity
of the mixture.
3. Each component is reported at the requested concentration ± the % stated for the concentration range.
Natural Gas and BTU Standards
It is the guiding principle of The following BTU mixes are held in inventory and are available for immediate delivery in small disposable
MESA Specialty Gas and cylinders. For cylinder information, please see cylinder specifications for the 20L and 14L Cylinder. The
equipment to offer only the recommended regulator for use with the 20L and 14L is a Series 300 regulator.
gas products to our
customers.
STOCK #: K2I5585 03143 360816 M-03085 99282 X-20987
COMPONENTS CONCENTRATION CONCENTRATION CONCENTRATION CONCENTRATION CONCENTRATION CONCENTRATION
We recognize that only NITROGEN 1.53% 2.39% 0.23% 0.95% 9.11% 0.23%
excellent customer service CARBON DIOXIDE 1.91% 10.05% 6.91% 2.97% 10.44%
will allow our growth in this METHANE BALANCE BALANCE BALANCE BALANCE BALANCE BALANCE
highly competitive ETHANE
calibration gas industry. 2.49% 4.80% 4.19% 6.50% 2.94% 9.95%
PROPANE 2.51% 0.973% 1.87% 4.63% 1.00% 4.01%
ISO-BUTANE 0.50% 0.286% 0.880% 0.919% 0.398% 0.890%
N-BUTANE 2.00% 0.288% 0.301% 0.920% 1.010% 0.837%
technical support through NEOPENTANE 0.100%
top experts in the field. Let ISO-PENTANE 0.301% 0.095% 0.210% 0.461% 0.201% 0.398%
us know how we can assist N-PENTANE 0.500% 0.095% 0.110% 0.463% 0.397% 0.349%
you. HEXANE 0.201% 0.077% 0.372% 0.324% 0.050% 0.298%
HEPTANE 0.006%
LIST IN 14L (AUD) 504.00 616.00 560.00 560.00 616.00 560.00

LIST IN 20L (AUD) 567.00 693.00 630.00 630.00 69300 630.00
RGA Standards
The following RGA mixes are held in inventory and are available for immediate delivery in small
disposable cylinders. For cylinder information, please see cylinder specifications for the 20L and
14L Cylinder. The recommended regulator for use with the 20L and 14L is a Series 300 regulator.
STOCK #: 47968AW 32286AW 8994AW

COMPONENTS CONCENTRATION CONCENTRATION CONCENTRATION
HELIUM
HYDROGEN BALANCE 3.26% 12.01%
NITROGEN 3.91% BALANCE BALANCE
OXYGEN
ARGON 0.49% 0.17% 0.99%
CARBON MONOXIDE 0.98% 1.01%
CARBON DIOXIDE 2.94% 0.10% 3.02%
METHANE 8.23% 1.99% 5.00%
ETHANE 5.84% 0.51% 3.99%
PROPANE 6.83% 0.94% 5.95%
CYCLOPROPANE 0.05% 0.03%
ISO-BUTANE 4.91% 2.07% 5.14%
N-BUTANE 3.86% 0.54% 3.98%
NEOPENTANE
ISO-PENTANE 0.97% 1.48% 0.99%
N-PENTANE 0.98% 0.49% 0.98%
HEXANE 0.49% 0.59% 0.10%
ETHYLENE 1.97% 0.51% 1.96%
ACETYLENE 1.94% 1.00%
PROPYLENE 1.95% 2.36% 2.99%
PROPADIENE 1.76% 0.99%
1-BUTENE 1.96% 0.62% 2.00%
CIS-2-BUTENE 1.96% 0.90% 0.99%
TRANS-2-BUTENE 1.95% 1.09% 2.96%
ISOBUTYLENE 1.94% 1.05% 0.99%
1,2-BUTADIENE
1,3-BUTADIENE 2.91% 0.12% 3.04%
METHYL ACETYLENE
VINYL ACETYLENE
ETHYL ACETYLENE
1-PENTENE 0.59% 0.39%
TRANS-2-PENTENE 0.30% 0.20%
CIS-2-PENTENE 0.20% 0.30%
2-METHYL-2-BUTENE 0.41% 0.19%
2-METHYL-1-BUTENE
3-METHYL-1-BUTENE 0.14%
3-METHYL-1,2-BUTADIENE
LIST IN 14L (AUD) 966.00 1008.00 1134.00
LIST IN 20L (AUD) 1127.00 1176.00 1323.00
MESA CALIBRATION GASES
Gas PRODUCT LIST
CGA FITTINGS: 17, 34 LITER - CGA 600

103 LITER - CGA C-10
221 LITER - CGA 165; 550 LITER - VARIES WITH GAS
29, 58, & 76* LITER - CGA C-10 *(76 LITER OFFERED WITH CGA 170)
OLD PART # NEW PART # DESCRIPTION
AIR ZERO
17 liter cylinders
P1002 P1002 Zero Air
34 liter cylinders
HP1002 H1002 Zero Air
103 liter cylinders
1002 J1002 Zero Air
221 liter cylinders
IM1002 M1002 Zero Air
550 liter cylinders
E1002 E1002 Zero Air
AMMONIA (NH3)
29 liter cylinders
F100525 F100525PN 25 ppm / N2
F100550A F100550PA 50 ppm / Air
F100550 F100550PN 50 ppm / N2
58 liter cylinders
Z100510 Z100510PN 10 ppm / N2
Z100525A Z100525PA 25 ppm / Air
Z100525 Z100525PN 25 ppm / N2
Z100550A Z100550PA 50 ppm / Air
Z100550 Z100550PN 50 ppm / N2
Z1005100A Z1005100PA 100 ppm / Air
Z1005100 Z1005100PN 100 ppm / N2
Z1005150 Z1005150PN 150 ppm / N2
Z1005200 Z1005200PN 200 ppm / N2
Z1005250 Z1005250PN 250 ppm / N2
Z1005300 Z1005300PN 300 ppm / N2
76 liter cylinders
X100550 X100550PN 50 ppm / N2
X1005100 X1005100PN 100 ppm / N2
BENZENE
58 liter cylinders
Z11145N Z11145PN 5 ppm / N2
Z11145 Z11145PA 5 ppm / Air
Z111450N Z111450PN 50 ppm / N2
Z111450 Z111450PA 50 ppm / Air
BTEX MIXTURES
76 liter cylinders
XD111410MX XD111410PM2 10 ppm Benzene, Toluene
Ethylbenzene, o-Xylene / N2
XD111420MX3 XD111420PM3 20 ppm Benzene, Toluene

Ethylbenzene, o-Xylene / N2
Other concentrations available
N-BUTANE
17 liter cylinders
P10118N P10118VN 8% / N2
P101125 P101125LA 25% LEL / Air
P101150 P101150LA 50% LEL / Air
34 liter cylinders
HP101125 H101125LA 25% LEL / Air
HP101150 H101150LA 50% LEL / Air
103 liter cylinders
101125 J101125LA 25% LEL / Air
101150 J101150LA 50% LEL / Air
CARBON DIOXIDE (CO2)
17 liter cylinders
P1013500N P1013500PN 500 ppm / N2
P1013700N P1013700PN 700 ppm / N2
P1013800N P1013800PN 800 ppm / N2
P10131000N P10131000PN 1000 ppm/ N2
P10132000N P10132000PN 2000 ppm / N2
34 liter cylinders
HP1013700N H1013700PN 700 ppm / N2
HP10131000N H10131000PN 1000 ppm / N2
HP10135N H10135VN 5% by Volume / N2
103 liter cylinders
1013100N J1013100PN 100 ppm / N2
1013200N J1013200PN 200 ppm / N2
10131000MX J101650PM3 1000 ppm / CO 50 ppm / Air
10131000N J10131000PN 1000 ppm / N2
10132000N J10132000PN 2000 ppm / N2
101325N J10132.5VN 2.5% by Volume / N2
10135N J10135VN 5% by Volume / N2
101310N J101310VN 10% by Volume / N2
221 liter cylinders
IM10131000N M10131000PN 1000 ppm / N2
IM10132000N M10132000PN 2000 ppm / N2
CARBON MONOXIDE (CO)

17 liter cylinders
P101610 P101610PA 10 ppm / Air
P101620 P101620PA 20 ppm / Air
P101625 P101625PA 25 ppm / Air
P101635 P101635PA 35 ppm / Air
P101640 P101640PA 40 ppm / Air
P101650 P101650PA 50 ppm / Air
P101650N P101650PN 50 ppm / N2
P101660 P101660PA 60 ppm / Air
P1016100 P1016100PA 100 ppm / Air
P1016100N P1016100PN 100 ppm / N2
P1016200 P1016200PA 200 ppm / Air
P1016200N P1016200PN 200 ppm / N2
P1016250 P1016250PA 250 ppm / Air
P1016300 P1016300PA 300 ppm / Air
P1016400 P1016400PA 400 ppm / Air
34 liter cylinders
HP101610 H101610PA 10 ppm / Air
HP101620 H101620PA 20 ppm / Air
HP101625 H101625PA 25 ppm / Air
HP101635 H101635PA 35 ppm / Air
HP101640 H101640PA 40 ppm / Air
HP101650 H101650PA 50 ppm / Air
HP101650N H101650PN 50 ppm / N2
HP101660 H101660PA 60 ppm / Air
HP1016100 H1016100PA 100 ppm / Air
HP1016100N H1016100PN 100 ppm / N2
HP1016150 H1016150PA 150 ppm / Air
HP1016200 H1016200PA 200 ppm / Air
HP1016200N H1016200PN 200 ppm / N2
HP1016250 H1016250PA 250 ppm / Air
HP1016300 H1016300PA 300 ppm / Air
HP1016400 H1016400PA 400 ppm / Air
103 liter cylinders
101610 J101610PA 10 ppm / Air
101620 J101620PA 20 ppm / Air
101625 J101625PA 25 ppm / Air
101635 J101635PA 35 ppm / Air
101640 J101640PA 40 ppm / Air
101650 J101650PA 50 ppm / Air
101650N J101650PN 50 ppm / N2
101660 J101660PA 60 ppm / Air
101660N J101660PN 60 ppm / N2
101675 J101675PA 75 ppm / Air
103 Liter cylinders CARBON MONOXIDE (CO)
101680 J101680PA 80 ppm / Air
101680N J101680PN 80 ppm / N2
1016100 J1016100PA 100 ppm / Air
1016100N J1016100PN 100 ppm / N2
1016150 J1016150PA 150 ppm / Air
1016200 J1016200PA 200 ppm / Air
1016200N J1016200PN 200 ppm / N2
1016250 J1016250PA 250 ppm / Air
1016300 J1016300PA 300 ppm / Air
1016400 J1016400PA 400 ppm / Air
1016400N J1016400PN 400 ppm / N2
1016500 J1016500PA 500 ppm / Air
1016500N J1016500PN 500 ppm / N2
10161000N J10161000PN 1000 ppm / N2
550 liter cylinders
E101620 E101620PA 20 ppm / Air
E101650 E101650PA 50 ppm / Air
E1016100 E1016100PA 100 ppm / Air
E1016250 E1016250PA 250 ppm / Air
CHLORINE (CL2)
29 liter cylinders
FB10175 FB10175PN 5 ppm / N2
FB101710 FB101710PN 10 ppm / N2
58 liter cylinders
ZB10175 ZB10175PN 5 ppm / N2
ZB101710 ZB101710PN 10 ppm / N2
ETHYLENE
17 liter cylinder
P196212 P196212PA 12 ppm / Air
P196227 P196227PA 27 ppm / Air
ETHYLENE OXIDE (ETO)

58 liter cylinders
Z10405 Z10405PN 5 ppm / N2
Z104010 Z104010PN 10 ppm / N2
Z104050 Z104050PN 50 ppm / N2
CFC'S/HCFC'S/HFC'S (REFRIGERANTS)
103 liter cylinders R-11
251710N J251710PN 10 ppm / N2
251730N J251730PN 30 ppm / N2
2517100N J2517100PN 100 ppm / N2
R-12
102810N J102810PN 10 ppm / N2
102830N J102830PN 30 ppm / N2
1028100N J1028100PN 100 ppm / N2
R-22
101810N J101810PN 10 ppm / N2
101830N J101830PN 30 ppm / N2
1018100 J1018100PA 100 ppm / Air
1018100N J1018100PN 100 ppm / N2
R-123
12310N JR12310PN 10 ppm / N2
12330N JR12330PN 30 ppm / N2
123100N JR123100PN 100 ppm / N2
R-134A
315910N J315910PN 10 ppm / N2
315930N J315930PN 30 ppm / N2
3159100N J3159100PN 100 ppm / N2
3159100 J3159100PA 100 ppm / Air
17 Liter cylinders HEXANE
P120820 P120820LA 20% LEL / Air
P120825 P120825LA 25% LEL / Air
P120830 P120830LA 30% LEL / Air
P120840 P120840LA 40% LEL / Air
34 liter cylinders
HP1208025 H120825PA 25 ppm / Air
HP1208050 H120850PA 50 ppm / Air
HP1208075 H120875PA 75 ppm / Air
HP1208100 H1208100PA 100 ppm / Air
HP1208400 H1208400PA 400 ppm / Air
HP1208500 H1208500PA 500 ppm / Air
HP120810 H120810LA 10% LEL / Air
HP120820 H120820LA 20% LEL / Air
HP120825 H120825LA 25% LEL / Air
HP120830 H120830LA 30% LEL / Air
103 liter cylinders
1208025 J120825PA 25 ppm / Air
1208050 J120850PA 50 ppm / Air
1208100 J1208100PA 100 ppm / Air
1208500 J1208500PA 500 ppm / Air
120810 J120810LA 10% LEL / Air
120820 J120820LA 20% LEL / Air
120825 J120825LA 25% LEL / Air
120830 J120830LA 30% LEL / Air
221 liter cylinders
IM120840 M120840LA 40% LEL / Air
HYDROGEN (H2)
17 liter cylinders
P1049 P1049 100%
P10492000 P10492000PA 2000 ppm / Air
P104920 P104920LA 20% LEL (0.8% by Volume) / Air
34 liter cylinders
HP1049 H1049 100%
HP104920 H104920LA 20% LEL (0.8% by Volume) / Air
HP104925 H104925LA 25% LEL (1.0% by Volume / Air
103 liter cylinders
104920 J104920LA 20% LEL (0.8% by Volume) / Air
1049100 J1049100PA 100 ppm / Air
1049500 J1049500PA 500 ppm / Air
10491000 J10491000PA 1000 ppm / Air
221 liter cylinders
IM104950N M10492VN 50% LEL (2.0% by Volume) / N2
HYDROGEN CYANIDE (HCN)

58 liter cylinders
Z10515 Z10515PN 5 ppm / N2
Z105110 Z105110PN 10 ppm / N2
Z105120 Z105120PN 20 ppm / N2
HYDROGEN SULFIDE (H2S)

29 liter cylinders
F105310 F105310PN 10 ppm / N2
F105310A F105310PA 10 ppm / Air
F105325 F105325PN 25 ppm / N2
F105325A F105325PA 25 ppm / Air
F105350 F105350PN 50 ppm / N2
F105350A F105350PA 50 ppm / Air
F105310MX12 F105310PM12 10 ppm / Pentane Sim. 58% LEL (1.5% CH4) / CO 300 ppm / O2 15% / N2
F105310MX21 F105310PM21 10 ppm / Methane 50% LEL / CO 300 ppm / O2 15% / N2
F105310MX24 F105310PM24 10 ppm / Methane 50% LEL / CO 50 ppm / O2 20.9% / N2
F105325MX45 F105325PM45 25 ppm / Methane 50% LEL / CO 50 ppm / Air
F105325MX48 F105325PM48 25 ppm / Methane 50% LEL / CO 100 ppm / Air
F105325MX55 F105325PM55 25 ppm / Pentane 50% LEL / CO 50 ppm / O2 20.9% / N2
F105325MX57 F105325PM57 25 ppm / Propane Sim.50% LEL (1.62% CH4) / CO 50 ppm / O2 19% / N2
F105325MX58 F105325PM58 25 ppm / Pentane 25% LEL / CO 100 ppm / O2 19% / N2
F105325MX77 F105325PM77 25 ppm / Prop. Sim. 50% LEL (1.62% CH4) / CO 50 ppm / O2 18% / N2
F105320MX1 F105320PM1 20 ppm / Pentane sim. 58% LEL (1.5% CH4) / 60 ppm CO/ 15% O2/ N2
Other mixtures available upon request
58 liter cylinders HYDROGEN SULFIDE (H2S)
Z10535 Z10535PN 5 ppm / N2
Z10535A Z10535PA 5 ppm / Air
Z105310 Z105310PN 10 ppm / N2
Z105310A Z105310PA 10 ppm / Air
Z105320 Z105320PN 20 ppm / N2
Z105320A Z105320PA 20 ppm / Air
Z105325 Z105325PN 25 ppm / N2
Z105325A Z105325PA 25 ppm / Air
Z105330 Z105330PN 30 ppm / N2
Z105335 Z105335PN 35 ppm / N2
Z105340 Z105340PN 40 ppm / N2
Z105340A Z105340PA 40 ppm / Air
Z105350 Z105350PN 50 ppm / N2
Z105350A Z105350PA 50 ppm / Air
Z105360 Z105360PN 60 ppm/ N2
Z105390 Z105390PN 90 ppm / N2
Z1053100 Z1053100PN 100 ppm / N2
Z1053100A Z1053100PA 100 ppm / Air
Z105310MX4 Z105310PM4 10 ppm / Pentane Sim. 58% LEL (1.5% CH4) / CO 60 ppm / O2 15% / N2
Z105310MX10 Z105310PM10 10 ppm / Pentane 10% LEL / CO 35 ppm / O2 18% / N2
Z105310MX12 Z105310PM12 10 ppm / Pent.Sim. 58% LEL (1.5% CH4) / CO 300 ppm / O2 15% / N2
Z105310MX17 Z105310PM17 10 ppm / Methane 10% LEL / CO 35 ppm / O2 18% / N2
Z105325MX35 Z105325PM35 25 ppm / Pentane 25% LEL / O2 19% / N2
Z105325MX37 Z105325PM37 25 ppm / Methane 50% LEL / O2 19% / N2
Z105325MX38 Z105325PM38 25 ppm / Methane 50% LEL / Air
Z105325MX42 Z105325PM42 25 ppm / Propane 50% LEL / CO 50 ppm / Air
Z105325MX43 Z105325PM43 25 ppm / Propane 50% LEL / CO 50 ppm / O2 19% / N2
Z105325MX45 Z105325PM45 25 ppm / Methane 50% LEL / CO 50 ppm / Air
Z105325MX48 Z105325PM48 25 ppm / Methane 50% LEL / CO 100 ppm / Air
Z105325MX55 Z105325PM55 25 ppm / Pentane 50% LEL / CO 50 ppm / Air
Z105325MX56 Z105325PM56 25 ppm / Pentane 50% LEL / O2 16% / N2
Z105325MX57 Z105325PM57 25 ppm / Prop.Sim. 50% LEL (1.62% CH4) / CO 50 ppm / O2 19% / N2
Z105325MX60 Z105325PM60 25 ppm / Prop.Sim. 50% LEL (1.62% CH4) / CO 50 ppm / Air
Z105325MX64 Z105325PM64 25 ppm / Methane 50% LEL / CO 200 ppm / O2 20.9% / N2
Z105325MX65 Z105325PM65 25 ppm / Methane 30% LEL (1.5%) / CO 95 ppm / O2 18% / N2
Z105325MX66 Z105325PM66 25 ppm / Propane 50% LEL (1.05%) / CO 50 PPM / O2 18% / N2
Z105325MX67 Z105325PM67 25 ppm / Pentane 50% LEL / CO 100 ppm / Air
Z105325MX68 Z105325PM68 25 ppm / Methane 50% LEL (2.5%) / CO 100 PPM / O2 13% / N2
Z105325MX69 Z105325PM69 25 ppm / Methane 50% LEL (2.5%) / CO 50 PPM / O2 17% / N2
Z105325MX77 Z105325PM77 25 ppm / Prop. Sim. 50% LEL (1.62% CH4) / CO 50 ppm / O2 18% / N2
Z105325MX78 Z105325PM78 25 ppm / CH4 50% LEL / CO 100 ppm / O2 19% / N2
Z105325MX83 Z105325PM83 25 ppm / n-Pentane 25% LEL / O2 19% / N2
11 liter aerosol BUMP GAS

A1053BG1 A1053BG1 Bump Gas (H2S / CO / Methane (LEL) / O2 )
A1053BG2 A1053BG2 Bump Gas (H2S / CO / Pentane (LEL) / O2 )
A1053BG3 A1053BG3 Bump Gas (H2S / CO / Propane (LEL) / O2 )
76 liter cylinders
X105325 X105325PN 25 ppm / N2
X105325A X105325PA 25 ppm / Air
X105350 X105350PN 50 ppm / N2
X105350A X105350PA 50 ppm / Air
X105325MX50 X105325PM50 25 ppm / Pentane 25% LEL / CO 50 ppm / O2 19% / N2
X105325MX51 X105325PM51 25 ppm / Methane 50% LEL / CO 50 ppm / O2 12% / N2
Other mixtures available upon request
ISOBUTYLENE
17 liter cylinders
P105510 P105510PA 10 ppm / Air
P105525 P105525PA 25 ppm / Air
P105550 P105550PA 50 ppm / Air
P105575 P105575PA 75 ppm / Air
P1055100 P1055100PA 100 ppm / Air
P1055500 P1055500PA 500 ppm / Air
P10551000 P10551000PA 1000 ppm / Air
34 liter cylinders
HP105510 H105510PA 10 ppm / Air
HP105520 H105520PA 20 ppm / Air
HP105550 H105550PA 50 ppm / Air
HP105575 H105575PA 75 ppm / Air
HP1055100 H1055100PA 100 ppm / Air
103 liter cylinders
105510 J105510PA 10 ppm / Air
105520 J105520PA 20 ppm / Air
105525 J105525PA 25 ppm / Air
105550 J105550PA 50 ppm / Air
105575 J105575PA 75 ppm / Air
1055100 J1055100PA 100 ppm / Air
221 liter cylinders
IM1055100 M1055100PA 100 ppm / Air
550 liter cylinders
E1055100 E1055100PA 100 ppm / Air
METHANE (CH4)
17 liter cylinders
P1971 P1971 99%
P197110 P197110PA 10 ppm / Air
P197150 P197150PA 50 ppm / Air
P197175 P197175PA 75ppm / Air
P197195 P197195PA 95 ppm / Air
P1971100 P1971100PA 100 ppm / Air
P1971015VMX P197115VM1 15% by Volume / CO2 15% by Volume / N2
P1971020VN P197120VN 20% by volume / N2
P1971050VN P197150VN 50% by Volume / N2
P1971050VMX P197150VM2 50% by Volume / CO2 35% by Volume / N2
P197110MX2 P197110LM2 10% LEL / CO 35 ppm / O2 18% / N2
P197129MX3 P197129LM3 29% LEL / O2 15% / N2
P197150MX1 P197150LM1 50% LEL / CO 50 ppm / Air
P197150MX16 P197150LM16 50% LEL / CO 200 ppm / O2 20% / N2
34 liter cylinders
HP1971 H1971 99%
HP19710162VMX H19711.62VM4 Prop. Sim. 50% LEL (1.62% CH4 ) / CO 50 ppm / Air
HP197150MX H197150LM42 50% LEL / O2 17% / N2
HP197150MX1 H197150LM1 50% LEL / CO 50 ppm / Air
HP197150MX8 H197150LM8 50% LEL / CO 200 ppm / O2 19.5% / N2
HP197150MX16 H197150LM16 50% LEL / CO 200 ppm / O2 20% / N2
103 liter cylinders
197110 J197110PA 10 ppm / Air
197150 J197150PA 50 ppm / Air
197195 J197195PA 95 ppm / Air
1971100 J1971100PA 100 ppm / Air
1971200 J1971200PA 200 ppm / Air
1971400 J1971400PA 400 ppm / Air
1971500 J1971500PA 500 ppm / Air
103 liter cylinders METHANE (CH4)

19710162VMX J19711.62VM4 Prop. Sim. 50% LEL (1.62% CH4 ) / CO 50 ppm / Air
19710162VMX1 J19711.62VM1 Prop. Sim 50% LEL (1.62% CH4) / CO 50 ppm / O2 18% / N2
19713N J19713VN 3% by Volume / N2
197129MX2 J197129LM2 29% LEL / CO 60 ppm / O2 15% / N2
197129MX3 J197129LM3 29% LEL / O2 15% / N2
197150MX1 J197150LM1 50% LEL / CO 50 ppm / Air
221 liter cylinders
IM1971100 M1971100PA 100 ppm / Air
IM19711 M197120LA 20% LEL (1.0% by Volume) / Air
550 liter cylinders
E197125 E197150LA 50% LEL (2.5% by Volume) / Air
NITRIC OXIDE (NO)
29 liter cylinders
F16605 F16605PN 5 ppm / N2
F166010 F166010PN 10 ppm / N2
F166025 F166025PN 25 ppm / N2
F166050 F166050PN 50 ppm / N2
F1660100 F1660100PN 100 ppm / N2
58 liter cylinders
Z16605 Z16605PN 5 ppm / N2
Z166010 Z166010PN 10 ppm / N2
Z166025 Z166025PN 25 ppm / N2
Z166030 Z166030PN 30 ppm / N2
Z166050 Z166050PN 50 ppm / N2
Z166080 Z166080PN 80 ppm / N2
Z1660100 Z1660100PN 100 ppm / N2
Z1660800 Z1660800PN 800 ppm / N2
76 liter cylinder
XD166010 XD166010PN 10 ppm / N2
XD166025 XD166025PN 25 ppm / N2
XD166050 XD166050PN 50 ppm / N2
NITROGEN (N2)
17 liter cylinders
P1066 P1066 99.999%
34 liter cylinders
HP1066 H1066 99.999%
103 liter cylinders
1066 J1066 99.999%
221 liter cylinders
IM1066 M1066 99.999%
550 liter cylinder
E1066 E1066 99.999%
NITROGEN DIOXIDE (NO2)

29 liter cylinders
F10675A F10675PA 5 ppm / Air
F10675 F10675PN 5 ppm / N2
F106710A F106710PA 10 ppm / Air
F106710 F106710PN 10 ppm / N2
F106725A F106725PA 25 ppm / Air
F106725 F106725PN 25 ppm / N2
58 liter cylinders
Z10675A Z10675PA 5 ppm / Air
Z10675 Z10675PN 5 ppm / N2
Z106710A Z106710PA 10 ppm / Air
Z106710 Z106710PN 10 ppm / N2
Z106725A Z106725PA 25 ppm / Air
Z106725 Z106725PN 25 ppm / N2
Z106730A Z106730PA 30 ppm / Air
Z106730 Z106730PN 30 ppm / N2
Z106750A Z106750PA 50 ppm / Air
Z106750 Z106750PN 50 ppm / N2
76 liter cylinders
XD10675A XD10675PA 5 ppm / Air
XD10675 XD10675PN 5 ppm / N2
XD106710A XD106710PA 10 ppm / Air
XD106710 XD106710PN 10 ppm / N2
Contact Customer Service for other mixture information
NITROUS OXIDE (N2O)

17 liter cylinders
P107010 P107010PA 10 ppm / Air
P107025 P107025PA 25 ppm / Air
P1070500 P1070500PA 500 ppm / Air
34 liter cylinders
HP107010 H107010PA 10 ppm / Air
HP107025 H107025PA 25 ppm / Air
HP1070500 H1070500PA 500 ppm / Air
103 liter cylinders
107010 J107010PA 10 ppm / Air
107025 J107025PA 25 ppm / Air
1070500 J1070500PA 500 ppm / Air
550 liter cylinders
E107010 E107010PA 10 ppm / Air
E107025 E107025PA 25 ppm / Air
E1070500 E1070500PA 500 ppm / Air
OXYGEN (O2)
17 liter cylinders
P107204 P1072.4VN 0.4% / N2
P10722 P10722VN 2.0% / N2
P10724 P10724VN 4.0% / N2
P10725 P10725VN 5.0% / N2
P10728 P10728VN 8.0% / N2
P107217 P107217VN 17.0% / N2
P107218 P107218VN 18.0% / N2
P1072209 P107220.9VN 20.9% / N2
34 liter cylinders
HP107204 H1072.4VN 0.4% / N2
HP10722 H10722VN 2.0% / N2
HP10724 H10724VN 4.0% / N2
HP10725 H10725VN 5.0% / N2
HP10728 H10728VN 8.0% / N2
HP107217 H107217VN 17.0% / N2
HP107218 H107218VN 18.0% / N2
HP1072209 H107220.9VN 20.9% / N2
103 liter cylinders
107202 J1072.2VN 0.2% / N2
107204 J1072.4VN 0.4% / N2
107205 J1072.5VN 0.5% / N2
10722 J10722VN 2.0% / N2
10724 J10724VN 4.0% / N2
10725 J10725VN 5.0% / N2
10728 J10728VN 8.0% / N2
107210 J107210VN 10.0% / N2
107217 J107217VN 17.0% / N2
107218 J107218VN 18.0% / N2
1072209 J107220.9VN 20.9% / N2
107221 J107221VN 21.0% / N2
221 liter cylinders
IM10722 M10722VN 2% / N2
IM10724 M10724VN 4% / N2
550 liter cylinders
E107204 E1072.4VN 0.4% / N2
E10722 E10722VN 2% / N2
PENTANE
17 liter cylinders
P126550 P126550LA 50% LEL / Air
P126550MX2 P126550LM2 50% LEL / O2 15% / N2
34 liter cylinders
HP126510 H126510LA 10% LEL / Air
HP126525 H126525LA 25% LEL / Air
HP126525MX4 H126525LM4 25% LEL / CO 100 ppm / O2 19% / N2
HP126525MX7 H126525LM7 25% LEL / O2 19% / N2
HP126550MX2 H126550LM2 50% LEL / O2 15% / N2
103 liter cylinders
126525 J126525LA 25% LEL / Air
126550 J126550LA 50% LEL / Air
126550MX2 J126550LM2 50% LEL / O2 15% / N2
550 liter cylinders
E126525MX E126525LM5 25% LEL / CO 50 ppm / O2 19% / N2
PHOSPHINE (PH3)
58 liter cylinders
Z219905 Z2199.5PN 0.5 ppm / N2
Z21991 Z21991PN 1 ppm / N2
Z21995 Z21995PN 5 ppm / N2
76 liter cylinders
X219905 X2199.5PN 0.5 ppm / N2
X21991 X21991PN 1 ppm / N2
X21995 X21995PN 5 ppm / N2
PROPANE
17 liter cylinders
P1075 P1978 99%
P107530 P197830LA 30% LEL / Air (0.63% by Volume)
P107550 P197850LA 50% LEL / Air (1.05% by Volume)
34 liter cylinders
HP107520 H197820LA 20% LEL / Air (0.42% by Volume)
103 liter cylinders
107520 J197820LA 20% LEL / Air (0.42% by Volume)
107530MX J197830LM1 30% LEL / CO 60 ppm / O2 15% / N2
SULFUR DIOXIDE (SO2)
29 liter cylinders
F107910 F107910PN 10 ppm / N2
F107910A F107910PA 10 ppm / Air
F107925 F107925PN 25 ppm / N2
F107925A F107925PA 25 ppm / Air
F107950 F107950PN 50 ppm / N2
58 liter cylinders
Z10795 Z10795PN 5 ppm / N2
Z10795A Z10795PA 5 ppm / Air
Z10795MX Z10795PM4 5 ppm / Pentane 25% LEL / CO 50 ppm / O2 15% / N2
Z107910 Z107910PN 10 ppm / N2
Z107910A Z107910PA 10 ppm / Air
Z107910MX Z107910PM8 10 ppm / Propane 52% LEL / CO 50 ppm / Air
Z107920 Z107920PN 20 ppm / N2
Z107925A Z107925PA 25 ppm / Air
Z107925 Z107925PN 25 ppm / N2
Z107925MX Z107925PM6 25 ppm / Pentane 25% LEL / CO 50 ppm / O2 19% / N2
Z107925MX1 Z107925PM1 25 ppm / Pentane 50% LEL / CO 200 ppm / O2 20 / N2
Z107935 Z107935PN 35 ppm / N2
Z107950 Z107950PN 50 ppm / N2
76 liter cylinders
X10795 X10795PN 5 ppm / N2
X10795A X10795PA 5 ppm / Air
X107910 X107910PN 10 ppm / N2
TOLUENE
58 liter cylinders
Z1294100 Z1294100PA 100 ppm / Air
Z1294400 Z1294400PA 400 ppm / Air
ACCESSORIES
REGULATORS FOR 17 / 34 LITER STEEL CYLINDERS
CGA 600
400 N/A Dispensing Valve W/Tubing
400-150 N/A Regulator 1.5 LPM (17 / 34 liter)
REGULATORS FOR 29 / 58 LITER ALUM. and 103 LITER STEEL CYL

CGA C-10
500-030 N/A Regulator 0.3 LPM (58/103 liter)
500-050-SS N/A SS Regulator 0.5 LPM (58 liter)
500-100-SS N/A SS Regulator 1.0 LPM (58 liter)
Gauge N/A 1000 PSI gauge for 500 series regulator
GaugeSS N/A 1000 PSI S.S. gauge for 500 series regulator
REGULATORS w/MULTIPLE FLOW SETTINGS

OF: 0.3 - 0.5 - 1 - 1.5 - 2 - 2.5 - 3 - 5 - 6 -7 - 8 liters per minute
For 17 / 34 / 103 / 29 / 58 / 76 LITER CYLINDERS & REFILLABLES
600-165 N/A Regulator with CGA 165 inlet (221 liter cylinders)
600-170 N/A Regulator with CGA 170 inlet
600-330 N/A Regulator with CGA 330 inlet (Refillable cylinder)
600-600 N/A Regulator with CGA 600 ( 17/ 34 liter steel cylinders)
600-660 N/A Regulator with CGA 660 (Refillable cylinder)
600-C10 N/A Regulator for 103 liter cylinders (Non-Reactive Mixtures-Brass Gauge)
600-C10-SS N/A Regulator for 29 / 58 liter aluminum cylinder (Reactive Mixtures-SS Gauge)
MINIATURE REGULATORS
For 221 liter cylinders
701 N/A Regulator with 25 PSIG delivery pressure and CGA 165 inlet
MINIATURE REGULATORS
For 76 liter, 550 liter cylinders
900-30 N/A Regulator w/3500 psig inlet pressure, 0-30 psig delievery range
(various cga connections)
DEMAND FLOW REGULATORS

For 17 / 34 / 103 / 29 / 58 / 76 LITER CYLINDERS & REFILLABLES
8C10 N/A Demand Flow Regulator for 103 / 29 / 58 liter cylinders
8180 N/A Demand Flow Regulator with CGA 180
500A N/A EMPTY CASES

Case to Hold 4 ea-17 / 29 / 34 Ltr. Cyl
500B N/A Case for 1 ea 58 / 103 Ltr. & 2 ea 17 / 29 / 34 Ltr. Cyl.
500C N/A Case to Hold 3 ea 58/103 Ltr. Cyl
500D N/A Case to Hold 2 ea 17 / 29 / 34 Ltr. Cyl
505 N/A Case to Hold 2 ea 58/103 Ltr. Cyl
CYLINDER TRANSPORT BAG

CTB-100 N/A Dual cylinder Transport Bag
SUPPLEMENTAL ACCESSORIES
TY2002 N/A Tygon Tubing (Per ft.)
FEP-2 N/A 1/8" diameter tubing (for chlorine)
FEP-4 N/A 1/4" diameter tubing (for chlorine)
909D N/A DeLuxe Tedlar Span Bag 9x9 Double Valve
MESA 300 Series
It is the guiding principle of 20L Regulator
MESA Specialty Gas and
highest quality calibration Recommended Applications
gas products to our
customers. The 300 Series regulator is for use with MESA’s 20L Cylinder. These
regulators are recommended for non-corrosive gas service.

Description
will allow our growth in this
highly competitive The 300 Series regulator is a single stage diaphragm style regulator.
calibration gas industry. The pressure control knob permits adjustment of the outlet delivery
pressure. Each regulator comes with a delivery pressure gauge.

top experts in the field. Let
us know how we can assist Available Models
you.
Part Number Output Range

300-030 0-30 psig
Standard Materials
Body Brass
Diaphragm Viton
Seat Acetal
Seal Viton
Standard Specifications
Maximum Inlet 300 psig

Flow Coefficient Cv= 0.36
Temperature Range 35o to 150o F
Inlet Connection CGA 165
Outlet Connection ¼" FNPT
Gauge 0-30 psig
MESA 400 Series
It is the guiding principle of 17L Preset Flow Regulator
gas products to our
customers.
The 400 Series regulator is for use with MESA's 17L Cylinder. These regulators
are recommended for non-corrosive gas service.
excellent customer service Description
highly competitive The 400 Series regulator is a single stage piston style regulator. The control valve
calibration gas industry.
permits constant gas flow and easy on/off. Each regulator comes with a cylinder
pressure gauge and is available in five preset flow models.
top experts in the field. Let
us know how we can assist Available Models
you.
Part Number Flow Rate

400-025 0.25
400-030 0.30
400-050 0.50
400-100 1.00
400-150 1.50
Standard Materials
Body Brass Bar Stock

Spring Housing Chrome Plated
Cap Brass
Piston Brass
Piston "O" Rings Buna-N
Seal Teflon
Maximum Inlet 500 psig

Inlet Connection CGA 600
Outlet Connection 3/16" Hose Barb
High Performance Specialty Gas Regulators
It is the guiding principle of
equipment to offer only the MESA Series 200 Dual Stage Cylinder Regulator
gas products to our
customers.
Standard Configuration Description
We recognize that only All regulators are sold complete with inlet CGA, two gauges and a The MESA 200 Series regulators are precision manufactured
excellent customer service diaphragm packless outlet control valve. from machined bar stock. This design minimizes
will allow our growth in this contamination of the gas stream by in-board diffusion of
highly competitive atmospheric contaminates. The design also minimizes cross-
calibration gas industry. Recommended Applications contamination of the gas stream as is frequently
encountered with less expensive forged body regulators.
The two stage cylinder
regulator is recommended Standard Materials of Construction
where delivery pressure
technical support through Body Options:
must be maintained
top experts in the field. Let Brass
constant as the cylinder
us know how we can assist Chrome Plated Brass
pressure decreases. These
you. 316L Stainless Steel
regulators are ideally suited
for continuous withdrawal Diaphragm:
of gas from pressurized Teflon Lined 304 Stainless Steel
cylinders. Seat:
Tefzel
Seals:
Brass bodies are Teflon
recommended for non- Poppet:
corrosive gases. Chrome plated brass bodies are also recommended for 316L Stainless Steel
non-corrosive gases. The addition of chrome plating to the brass body Poppet Spring:
helps to protect the outside body of the regulator from corrosive Inconel 600
ambient conditions such as found in chemical plants and refineries. Inlet Filter:
316L Stainless Steel bodies are recommended for mildly corrosive 20 Micron 316 Stainless Steel
gases. Monel and Hastelloy bodies are available upon special request. Adjusting Knob:
Black Anodized Aluminum
Available CGA: 110, 170, 180, 320, 326, 330, 346, 350, 510, 540, 580, 590, 660, 679 and 705
High Performance Specialty Gas Regulators
It is the guiding principle of
equipment to offer only the MESA Series 100 Single Stage Cylinder Regulator
gas products to our
customers.
Standard Configuration Description
We recognize that only All regulators with the exception of the low inlet pressure series (see The MESA 100 Series regulators are precision
excellent customer service below) are sold complete with inlet CGA, two gauges and a diaphragm manufactured from machined bar stock. This design
will allow our growth in this packless outlet control valve. minimizes contamination of the gas stream by in-board
highly competitive diffusion of atmospheric contaminates. The design also
calibration gas industry. minimizes cross-contamination of the gas stream as is
Recommended Applications
frequently encountered with less expensive forged body
regulators.
The single stage cylinder
MESA Specialty Gas offers regulator is recommended Standard Materials of Construction
technical support through where slight changes in
top experts in the field. Let delivery pressure are Body Options:
us know how we can assist acceptable as the cylinder Brass
you. pressure decreases. These Chrome Plated Brass
regulators are ideally suited 316L Stainless Steel
for periodic withdrawal of gas Diaphragm:
from pressurized cylinders. Teflon Lined 304 Stainless Steel
Seat:
Tefzel
Brass bodies are recommended for non-corrosive gases. Chrome plated
Seals:
brass bodies are also recommended for non-corrosive gases. The
Teflon
addition of chrome plating to the brass body helps to protect the outside
Poppet:
body of the regulator from corrosive ambient conditions such as found in
316L Stainless Steel
chemical plants and refineries. 316L Stainless Steel bodies are
Poppet Spring:
recommended for mildly corrosive gases. Monel and Hastelloy bodies are Inconel 600
available upon special request. Inlet Filter:
20 Micron 316 Stainless Steel
Adjusting Knob:
Black Anodized Aluminum
Special Configuration for Low Inlet Pressure Applications
A specially designed regulator is available for low inlet pressure applications such as encountered when sampling hydrocarbon mixes in
low pressure cylinders. The regulator has a special seat designed to insure precise control of the delivery pressure at low inlet
pressures. The regulator is sold complete with inlet CGA and two gauges. The standard diaphragm packless valve is replaced by a
packed outlet control valve.
Available CGA: 110, 170, 180, 320, 326, 330, 346, 350, 510, 540, 580, 590, 660, 679 and 705
MESA 500 Series
It is the guiding principle of 58L/103L Preset Flow Regulator
gas products to our
customers.
The 500 Series regulator is for use with MESA's 58L and 103L Cylinders. These
regulators are recommended for non-corrosive gas service. However, they have
also been found acceptable for low level reactive gases provided the minor
reactive component is less than 100 ppm in concentration and the regulator is
will allow our growth in this removed from the cylinder after each use. MESA's 600 Series aluminum body
highly competitive regulator is recommended for extended use with reactive calibration gas
calibration gas industry. standards. These regulators are recommended for non-corrosive gas service.
Description
top experts in the field. Let The 500 Series regulator is a single stage piston style regulator. The control valve
us know how we can assist permits constant gas flow and easy on/off. Each regulator comes with a cylinder
you. pressure gauge and is available in five preset flow models.
Recommended Applications
The 400 Series regulator is for use with MESA's 17L Cylinder. These regulators are recommended for non-corrosive
gas service.
Available Models
Part Number Flow Rate

500-020 0.20
500-025 0.25
500-030 0.30
500-050 0.50
500-100 1.00
500-150 1.50
500-250 2.50
500-600 6.00
Standard Materials
Body Brass Bar Stock

Spring Housing Chrome Plated
Cap Brass
Piston Brass
Piston "O" Rings Buna-N
Seal Teflon
Maximum Inlet 1,000 psig

Inlet Connection 5/8-18 UNF (C-10)
MESA 600 Series
It is the guiding principle of 58/103L Multi-Flow Regulator
gas products to our
customers.
The 600 Series regulator is for use with
MESA's 58L, 103L and 104L Cylinders.
They can also be used on conventional high
pressure cylinders and lecture bottles. These
will allow our growth in this regulators are recommended for both non-
highly competitive corrosive and corrosive gas service including
calibration gas industry. Ammonia, Hydrogen Sulfide, Nitric Oxide and Sulfur Dioxide standards.
Description
top experts in the field. Let The 600 Series regulator is a single stage piston style regulator. All wetted parts of the regulator are
us know how we can assist either aluminum or stainless steel. The regulator has 8 switch selectable flow settings ranging from 0.2 to
you. 6 liters per minute. It is available with either a brass or stainless steel gauge and various CGA
connections.
Available Models
Part Number Gauge (psig) Inlet

610-CGA 0-3,000 Brass CGA
620-CGA 0-3,000 SS SS CGA
610-CGA-BRC10 0-1,000 Brass Brass C-10
620-SSC10 0-1,000 SS SS C-10
NOTE: C-10 is same as 5/8"- 18UNF
Standard Materials
Body Aluminum
Spring Housing Aluminum
Cap Aluminum
Nozzle Aluminum
Seal Viton
Seat Kel-F 50 Micron
Inlet Filter Stainless Steel
Maximum Inlet 2,000 psig

Flow Settings 0.2, 0.3, 0.5, 1.0, 1.5, 2.5, 5.0, 6.0
Gas Cylinder Specifications
It is the guiding principle of MESA Specialty Gases offers a wide variety of specialty gas and calibration gas cylinders. Take a
MESA Specialty Gas and look at our most common specialty gas cylinder packages available below. If you are interested in
equipment to offer only the disposable calibration gas, take a look at our disposable calibration gas web site for product
gas products to our details. We also offer a stock of BTU specialty gas mixtures, Natural gas standards and RGA
customers. mixtures available for immediate delivery. Take a look at our RGA and BTU standards page for
details.

excellent customer service High Pressure Steel to 2640 psi
highly competitive Water Height w/ Nominal
Cylinder Diameter
calibration gas industry. Capacity Valve Shipping
Designation (inches)
(liters) (inches) Weight(lbs)*
049-HP 49-50 9.25 60 150
technical support through 044-HP 43-44 9.00 56 125
top experts in the field. Let 028-HP 27-28 7.00 47 70
us know how we can assist
you. 016-HP 16-17 7.00 36 53
010-HP 10-11 7.00 28 38
008-HP 7-8 7.00 23 31
*includes estimated weight of contents
High Pressure Aluminum to 2200 psi
Water Height w/ Nominal
Cylinder Diameter
Capacity Valve Shipping
A030-HP 29-30 8.00 53 65
A016-HP 15-16 7.25 38 45
A010-HP 10-11 7.25 29 32
A006-HP 5-6 7.00 21 22
Low Pressure Steel and Aluminum 240 psi

Water Height w/ Nominal
Cylinder Diameter
Capacity Valve Shipping
Low Pressure Steel Cylinders
216-LP 216-217 24.00 40 175
110-LP 108-110 15.00 50 75
065-LP 64-65 12.00 43 46
046-LP 43-44 12.00 29 30
028-LP 27-28 9.00 35 28
022-LP 21-22 12.00 18 20
012-LP 11-12 9.00 17 15
Low Pressure Aluminum Cylinders
A022-LP 21-22 12.00 18 13
A012-LP 11-12 9.00 17 10
Disposable and Transportable

Cylinder Service Gas Contents Diameter Height
Material Outlet Fitting
Designation Pressure (psi) (liters) (inches) (inches)
14L Steel CGA-160* 240 14 3 10
17L Steel CGA-600 240 17 3 11
GAS Regulators: Pressure/Flow
GAS Regulators: Pressure/Flow
GasCon Systems
(Australian Standard)
Cylinder Pressure Regulators

(Australian Standard)
Brass-Body
401
High
Purity
Single-Stage
411
High
Purity
Dual-Stage
also available SS-Body : Corrosive Gases
CGA( -180,N2) Bottle Thread
see also Restek CGA Regulators & Accessories
Gascon Systems Single Stage Regulators
The Gascon Systems range of single stage regulators are

manufactured from brass bar stock and are recommended for
use in non-corrosive gas applications. Versions are available
for industrial, laboratory, medical and scientific grade gases.
Wide range of options including; inlet connection

orientations, inlet fittings (eg. AS, CGA, BS, DIN,
AFNOR), diaphragm materials, outlet pressure ranges,
ventable pressure relief valves, internal flow restrictors for
pressure charging systems, preset outlet pressure models,
different seat configurations for different flow/pressure
characteristics, wall mount brackets and panel mount kits.
Specifications:
Max. Inlet Pressure: 20,000 kPa @ 15°C
(31,500 kPa optional)
Outlet Pressures: 0 – 20,000 kPa
Gauges: 50mm diameter brass
Body Ports: ¼” NPT (F)
Weight: 1.4 kg
Materials:
Body: Chrome plated brass bar stock
¾ Encapsulated seat assembly with built-in filter
Bonnet: Chrome plated brass
¾ Bar Stock body
¾ Maximum outlet pressure adjusting stop Seat: PCTFE or PTFE
¾ Colour coded control knobs Filter: 63 micron cupro nickel
¾ Australian made
Diaphragm: Neoprene; EDPM; PTFE coated neoprene; or
316L stainless steel
Applications:
• For use in non-corrosive gas applications
• Where a slight variation in delivery pressure is acceptable as
cylinder contents pressure decreases
• Regulator is used for intermediate short periods of time
• Used with liquefied gas supplies
• Laboratory reticulation system supply regulator.
ORDERING INFORMATION XX - X - X - X - XXXX - XXX - XXX - XXX - XX - XXXX
Port Pressure Outlet Optional Inlet Outlet

Model Inlet Options Gas
s Adjustment Pressure Fittings Fitting Fitting
R Standard 2 V Vertical A Adjustable Required G Inlet Gauge T10 (AS2473 Type 10) 4F (1/4“ Female Port) WM Wall ACET Acetylene
(up to grade 3.5) 3 S Side P Preset Outlet GG Inlet & T11 (AS2473 Type 11) 2S (1/8” Tube Fitting) Mount Bracket AIR Air
PR Laboratory 4 R Rear Pressure in Outlet Gauge T20 (AS2473 Type 20) 4S (1/4“ Tube Fitting) AR Argon
(up to grade 4.5) 5 kPa P Pressure Relief T30 (AS2473 Type 30) 6S (3/8” Tube Fitting) PM Panel CO Carbon Monoxide
HR High Purity 6 Valve T50 (AS2473 Type 50) 8S (1/2“ Tube Fitting) Mount Bracket CO2 Carbon Dioxide
(up to grade 5.5) GGP 2 Gauges & T51 (AS2473 Type 51) 2M (1/8”NPT male) HE Helium
MR Medical PRV T60 (AS2473 Type 60) 4M (1/4“ NPT male) H2 Hydrogen
T61 (AS2473 Type 61) 6M (3/8” NPT male) LPG Propane
320 (CGA320) 8M (1/2“ NPT male) METH Methane
330 (CGA330) 2B (1/8” hose barb) N2 Nitrogen
350 (CGA350) 4B (1/4“ hose barb) N2O Nitrous Oxide
510 (CGA510) 8B (1/2“ hose barb) OXY Oxygen
540 (CGA540) FA (fine adjust valve) SF6 Sulfur Hexafluorid
580 (CGA580) 58R (5/8”-18UN RH) OTHERS by Symbol
Y (Medical Yoke) 58L (5/8”-18UN LH)
4F (1/4” Female NPT) SIS (medical sleeve
indexed system)
Others by Description Others by Description
Ordering examples
HR-5-V-A-1000-GGP-T20-4S-H2 Scientific hydrogen single stage regulator, vertical Type 20 inlet, adjustable to 1000 kPa, inlet and outlet
gauges, pressure relief valve and ¼” brass tube outlet fitting
MR-4-S-P-400-GP-Y-SIS-AIR Medical air single stage regulator, side pin indexed yoke inlet, preset 400 kPa, inlet gauge, pressure relief
valve and a sleeved indexed outlet fitting
GC Systems Dual Stage Regulators
The GC Systems range of dual stage regulators are

manufactured from brass bar stock and are recommended for
use in non-corrosive gas applications. Versions are available
for industrial, laboratory, medical and scientific grade gases.
Wide range of options including; inlet connection

orientations, inlet fittings (eg. AS, CGA, BS, DIN,
AFNOR), diaphragm materials, outlet pressure ranges,
ventable pressure relief valves, preset outlet pressure
models, different seat configurations for different
flow/pressure characteristics, and panel mount kits.
Specifications:
Max. Inlet Pressure: 20,000 kPa @ 15°C
(31,500 kPa optional)
Outlet Pressures: 0 – 5,000 kPa
Gauges: 50mm diameter brass
Body Ports: ¼” NPT (F)
Weight: 2.1 kg
Materials:
Body: Chrome plated brass bar stock
¾ Encapsulated seat assembly with built-in filter
¾ Bar Stock body
¾ Maximum outlet pressure adjusting stop Seat: PCTFE or PTFE
¾ Australian made Filter: 63 micron cupro nickel
Diaphragm: Neoprene; EDPM; PTFE coated neoprene; or
Applications: 316L stainless steel
• For use in non-corrosive gas applications
• Where a constant delivery pressure is required as cylinder
contents pressure decreases
• Regulator is used for continuous long periods of time
• Laboratory reticulation system supply regulator
ORDERING INFORMATION XX - X - X - X - XXXX - XXX - XXX - XXX -XXX - XXXX
Port Pressure Outlet Optional Inlet Outlet

Model Inlet Options Gas
s Adjustment Pressure Fittings Fitting Fitting
D Standard 2 V Vertical A Adjustable Required G Inlet Gauge T10 (AS2473 Type 10) 4F (1/4“ Female Port) PM Panel ACET Acetylene
(up to grade 3.5) 3 S Side P Preset Outlet GG Inlet & T11 (AS2473 Type 11) 2S (1/8” Tube Fitting) Mount Bracket AIR Air
PD Laboratory 4 Pressure in Outlet Gauge T20 (AS2473 Type 20) 4S (1/4“ Tube Fitting) AR Argon
(up to grade 4.5) 5 kPa P Pressure Relief T30 (AS2473 Type 30) 6S (3/8” Tube Fitting) CO Carbon Monoxide
HD High Purity 6 Valve T50 (AS2473 Type 50) 8S (1/2“ Tube Fitting) CO2 Carbon Dioxide
(up to grade 5.5) GGP 2 Gauges & T51 (AS2473 Type 51) 2M (1/8”NPT male) HE Helium
MD Medical PRV T60 (AS2473 Type 60) 4M (1/4“ NPT male) H2 Hydrogen
GGPP 2 Gauges T61 (AS2473 Type 61) 6M (3/8” NPT male) LPG Propane
& 2 PRV’s 320 (CGA320) 8M (1/2“ NPT male) METH Methane
330 (CGA330) 2B (1/8” hose barb) N2 Nitrogen
350 (CGA350) 4B (1/4“ hose barb) N2O Nitrous Oxide
510 (CGA510) 8B (1/2“ hose barb) OXY Oxygen
540 (CGA540) FA (fine adjust valve) SF6 Sulfur Hexafluorid
580 (CGA580) 58R (5/8”-18UN RH) OTHERS by Symbol
Y (Medical Yoke) 58L (5/8”-18UN LH)
4F (1/4” Female NPT) SIS (medical sleeve
indexed system)
Others by Description Others by Description
Ordering examples
HD-5-V-A-700-GGP-T10-4ST-OXY Scientific oxygen dual stage regulator, vertical Type 10 inlet, adjustable to 700 kPa, inlet and outlet
gauges, pressure relief valve and ¼” stainless steel tube outlet fitting
PD-5-S-A-100-GP-Y-4B-CO2 Medical carbon dioxide dual stage regulator, side pin indexed yoke inlet, adjustable to 100 kPa, inlet
And outlet gauges, pressure relief valve and a ¼” hose barb outlet
401 Series Single Stage Brass Bodied Scientific Regulator
¾ Pressure ranges of 0-15 to 0-500 PSI are Specifications:
available to cater for a broad range of Max. Inlet Pressure: 3000 PSI (210 BAR)
applications 4500 PSI (310 BAR) Option
¾ Brass barstock body means a smoother Gauges: 2” diameter brass, (chrome plated)
surface finish
¾ Versatility of configuring the regulator Temperature Range: -40º C to 60º C
with either front or rear panel mounting Body Ports: ¼” FPT
¾ Metal-to-metal diaphragm seal prevents Helium Leak Integrity: 1 x 10-9 scc/sec
gas contamination
¾ Capsule seat design for greater Cv: 0.1
serviceability and life Weight: 1.8 kg
¾ 316L stainless steel diaphragm
¾ Leak test certificate Materials:
Body: Brass bar stock
Seat: PTFE
PCTFE with 4500 PSI inlet option
The 401 Series regulators are intended for
primary pressure control of non-corrosive, Filter: 10 micron sintered bronze
high purity or liquefied gases, or where Diaphragm: 316L stainless steel
minor fluctuations in outlet pressure (as
gas supply diminishes) can be tolerated. Internal Seals: PTFE
ORDERING INFORMATION S401 - XXX - XXX - XXX - XX
Series Outlet Pressure Inlet Fitting Outlet Fitting Options

401 15 (0-15 psi) T10 (AS2473 Type 10) 4F (1/4” NPT Female) Inlet Purge
50 (0-50 psi) T20 (AS2473 Type 20) 2S (1/8” Tube) Captured Bonnet Vent
100 (0-100 psi) T30 (AS2473 Type 30) 4S (1/4” Tube) Panel Mount Kit
150 (0-150 psi) T50 (AS2473 Type 50) 8S (1/2” Tube) Wall Mount Bracket
250 (0-250 psi) T60 (AS2473 Type 60) 2B (1/8” Hose Barb)
500 (0-500 psi) 350 (CGA350) 4B (1/4” Hose Barb)
540 (CGA540) FA (Fine adjust valve)
580 (CGA580) 4M (1/4” NPT Male)
4F (1/4” NPT Female) DK (1/4” Diaphragm valve)
Others by description Others by description
411 Series Dual Stage Brass Bodied Scientific Regulator

surface finish
¾ Front panel mountable that is easily Temperature Range: -40º C to 60º C
installed Body Ports: ¼” FPT
¾ Metal-to-metal diaphragm seal prevents
Helium Leak Integrity: 1 x 10-9 scc/sec
gas contamination
Bonnet: Brass bar stock
primary pressure control of non-corrosive, Seat: PTFE
high purity or liquefied gases for
applications requiring constant pressure Filter: 10 micron sintered bronze
control and delivery regardless of supply Diaphragm: 316L stainless steel
pressure variations.
Internal Seals: PTFE

150 (0-150 psi) T50 (AS2473 Type 50) 8S (1/2” Tube)
580 (CGA580) 4M (1/4” NPT Male)
401 Series Regulator
Single Stage
Brass Barstock Body
Six-Port
Configuration
316L Stainless Steel 401-1331 shown
Diaphragm Typical Applications Advanced Features

• Gas and liquid chromatography • Brass barstock body
The 401 Series regulators are intended for Smooth surface finish
• High purity carrier gases
primary pressure control of noncorrosive,
• Zero, span and calibration gases • Front and rear panel mountable
high purity or liquefied gases, or for
Versatile system configuration
applications where minor fluctuations in • High purity chamber pressurization
• Pressure ranges 0-15 to 0-500 PSIG
outlet pressure due to diminishing inlet • Liquefied hydrocarbon gas control
Broad range of applications
supply can be tolerated. • Control of cryogenic gases
400 Advantage Materials Specifications

• Metal-to-metal diaphragm seal Body Maximum Inlet Pressure
No possibility of gas contamination Brass barstock 3000 PSIG (210 BAR)
• Capsule® seat Bonnet 4500 PSIG (310 BAR) optional
Increased serviceability and life Chrome Plated barstock Temperature Range
• 316L stainless steel diaphragm -40°F to 140°F (-40°C to 60°C)
Seat
No inboard diffusion PTFE Gauges
• Orientable captured vent capable PCTFE with 4500 PSIG inlet option 2” diameter chrome plated
Safety in any installation Filter Ports
• Low wetted surface area 10 micron sintered bronze ¼” FPT
Minimal purge requirements Diaphragm Helium Leak Integrity
• Field-adjustable pressure limit 316L stainless steel 1 x 10-9 scc/sec
Safeguard downstream equipment Internal Seals Cv
• Pipe away relief valve PTFE 0.1
Safely vent exhaust gases Weight (401-1331-580)
• Delivery pressure range easily changed 3.99 lbs. (1.81 kg)
Maximum flexibility
CRN OH 5216.5C
Flow Performance Curves
100 500
(6.9) (34.5)
90 450 2000 PSIG (138 BAR)

(6.2) (31) INLET PRESSURE
2000 PSIG (138 BAR)

80 INLET PRESSURE 400 1000 PSIG (138 BAR)
INLET PRESSURE
(5.5) (27.6)
70 500 PSIG (35 BAR)

350
OUTLET PRESSURE - PSIG (BAR)

INLET PRESSURE
(4.8) (24.1)
200 PSIG (13.8 BAR)
60 INLET PRESSURE
300
(4.1) (20.7)
50 250
(3.4) (17.2)
40
200
(2.8) 2000 PSIG (138 BAR)
(13.8) INLET PRESSURE
30 150 500 PSIG (35 BAR)

(2.0) (10.3) INLET PRESSURE
500 PSIG (35 BAR) 2000 PSIG (138 BAR)

200 PSIG (13.8 BAR)
20 INLET PRESSURE
INLET PRESSURE INLET PRESSURE
100
(1.4) (6.9) 2000 PSIG (138 BAR)
INLET PRESSURE
10 50 500 PSIG (35 BAR)

(0.7) (3.4)
INLET PRESSURE
2000 PSIG (138 BAR)
200 PSIG (13.8 BAR) 500 PSIG (35 BAR) INLET PRESSURE
INLET PRESSURE INLET PRESSURE
5 10 15 20 5 10 15 20 25 30 35 40
(142) (283) (425) (566) (142) (283) (425) (566) (708) (850) (991) (1133)
FLOW RATE - SCFM (LPM) N2 FLOW RATE - SCFM (LPM) N2
Ordering Information (For information about how to use this table please see page 4.)
401 A B C D -Inlet Options
Series Outlet Outlet Inlet Outlet Assembly/ Inlet Installed
401 Pressure Gauge Gauge Assemblies Gauges Connections Options
1: 0-15* 30”-0-30 PSIG 0: None 0: ¼” FPT Port 0: Bare Body 000: ¼” FPT A: Protocol
2: 0-50 30”-0-100 PSIG 3: 0-4000 PSIG 1: ¼” MPT 1: Standard Assembly TF2: 1/8” Tube Alarm Station
3: 0-100 30”-0-200 PSIG 5: 0-1000 PSIG 2: ¼” Tube Fitting (PSIG/kPa Gauges) TF4: ¼” Tube (110V)
4: 0-250 0-400 PSIG 6: 0-300 PSIG 3: Diaphragm Valve 2: Standard Assembly TF6: 1/8” Tube B: Protocol
¼” Tube Fitting (BAR/PSIG Gauges) Alarm Station
5: 0-500** 0-1000 PSIG 7: 0-400 PSIG M06: 6mm Tube
4: Cleanroom Assembly (220V)
7: 0-150 30”-0-200 PSIG 8: 0-6000 PSIG* 4: Diaphragm Valve
¼” MPT (PSIG/kPa Gauges) C: Protocol
5: Needle Valve 5: Cleanroom Assembly Switchover
*Not available with 4500 PSIG *Maximum inlet
maximum inlet pressure pressure 4500 PSIG ¼” MPT (BAR/PSIG Gauges) Station
(310 BAR) with 6: 1/8” Tube Fitting D: Deep Purge*
**Standard assembly does not PCTFE Seat Capsule G: Protocol
include relief valve 7: 1/8” Tube Fitting
Switchover
8: Diaphragm Valve Station with
1/8” Tube Fitting Alarm (110V)
9: Diaphragm Valve H: Protocol
¼” FPT Switchover
A: 1/8” BSP Station with
Right Hand Fitting Alarm (220V)
M: 6mm Tube Fitting M: Protocol
S: Diaphragm Valve Station
6mm Tube Fitting *Not available with 4500
PSIG max inlet pressure
Related • Panel Mount Kit (550-0002)

• Captured Vent Kit (550-0001)
Options • Helium Leak Certification (476-0002)
CONCOA
-33- Beach, VA 23454 USA
1501 Harpers Road • Virginia
1.800.225.0473 • 757.422.8330 • Fax: 757.422.3125 • www.concoa.com
401 Series Single Stage Brass Bodied Scientific Regulator
surface finish
¾ Versatility of configuring the regulator Temperature Range: -40º C to 60º C
with either front or rear panel mounting Body Ports: ¼” FPT
¾ Metal-to-metal diaphragm seal prevents Helium Leak Integrity: 1 x 10-9 scc/sec
gas contamination
Seat: PTFE
primary pressure control of non-corrosive, Filter: 10 micron sintered bronze
high purity or liquefied gases, or where Diaphragm: 316L stainless steel
minor fluctuations in outlet pressure (as
gas supply diminishes) can be tolerated. Internal Seals: PTFE

150 (0-150 psi) T50 (AS2473 Type 50) 8S (1/2” Tube) Wall Mount Bracket
580 (CGA580) 4M (1/4” NPT Male)
411 Series Dual Stage Brass Bodied Scientific Regulator

surface finish
¾ Front panel mountable that is easily Temperature Range: -40º C to 60º C
installed Body Ports: ¼” FPT
¾ Metal-to-metal diaphragm seal prevents
Helium Leak Integrity: 1 x 10-9 scc/sec
gas contamination
Bonnet: Brass bar stock
primary pressure control of non-corrosive, Seat: PTFE
high purity or liquefied gases for
applications requiring constant pressure Filter: 10 micron sintered bronze
control and delivery regardless of supply Diaphragm: 316L stainless steel
pressure variations.
Internal Seals: PTFE

150 (0-150 psi) T50 (AS2473 Type 50) 8S (1/2” Tube)
580 (CGA580) 4M (1/4” NPT Male)
Dual Stage
Brass Barstock Body
Six-Port
Configuration
316L Stainless Steel 411-1331 shown
Diaphragm Typical Applications Advanced Features

• EPA Protocol gases • Brass barstock body
• Gas and liquid chromatography Smooth surface finish
The 411 Series regulators are intended
• High purity carrier gases • Front panel mountable
for primar y pressure control of
• Zero, span and calibration gases Easy installation
noncorrosive, high purity or liquefied
gases for applications requiring constant • High purity chamber pressurization • 10 micron filtration in both stages
pressure control and delivery regardless Fail-safe seat performance
of supply pressure variations. • Pressure ranges 0-15 to 0-250 PSIG
Broad range of applications
400 Advantage Materials Specifications

• Metal-to-metal diaphragm seal Body Maximum Inlet Pressure
No possibility of gas contamination Brass barstock 3000 PSIG (210 BAR)
• Capsule® seat Bonnet 4500 PSIG (310 BAR) optional
Increased serviceability and life Chrome-Plated Brass barstock Temperature Range
• 316L stainless steel diaphragm -40°F to 140°F (-40°C to 60°C)
Seat
No inboard diffusion PTFE Gauges
• Orientable captured vent capable PCTFE with 4500 PSIG inlet option 2” diameter Chrome Plated
Safety in any installation Filter Ports
• Low wetted surface area 10 micron sintered bronze ¼” FPT
Minimal purge requirements Diaphragm Helium Leak Integrity
• Field-adjustable pressure limit 316L stainless steel 1 x 10-9 scc/sec
Safeguard downstream equipment Internal Seals Cv
• Pipe away relief valve PTFE 0.1
Safely vent exhaust gases Weight (411-2331-580)
• Delivery pressure range easily changed 5.3 lbs. (2.40 kg)
Maximum flexibility
CRN OH 5216.5C
-38-
20Đ 250Đ
(1.38) 400 Series Dual Stage Regulator (17.2) 400 Series Dual Stage Regulator
2000 PSIGĐ
INLET PRESSURE
18Đ
225Đ
(1.24)
(15.5)
500 PSIGĐ
INLET PRESSURE
16Đ
200Đ
(1.1)
(13.8)

14Đ

Đ 175Đ
(0.97) (12.0)
12Đ
(0.83) 150Đ
(10.3)
2000 PSIGĐ 2000 PSIGĐ

10Đ INLET PRESSURE 125Đ INLET PRESSURE
(0.69) (8.6)
500 PSIGĐ
INLET PRESSURE
200 PSIGĐ
500 PSIGĐ
8Đ INLET PRESSURE 100Đ INLET PRESSURE
(0.55) (6.9)
200 PSIGĐ
INLET PRESSURE
6Đ
(0.41) 75Đ
(5.2)
2000 PSIGĐ
INLET PRESSURE
4Đ
50Đ 200 PSIGĐ
(0.27) 500 PSIGĐ
INLET PRESSURE
2Đ
25Đ 2000 PSIGĐ
(0.13)
200 PSIGĐ
INLET PRESSURE 500 PSIGĐ
INLET PRESSURE
1Đ 2Đ 3Đ 4Đ 5Đ 10Đ 15Đ 20Đ
(28.3) (56.6) (85) (113) (142) (283) (425) (566)
FLOW - SCFM (LPM) FLOW - SCFM (LPM)
411 A B C D -Inlet Options
Series Outlet Outlet Inlet Outlet Assembly/ Inlet Installed
411 Pressure Gauge Gauge Assemblies Gauges Connections Options
1: 0-15 30”-0-30 PSIG 0: None 0: ¼” FPT Port 0: Bare Body 000: ¼” FPT A: Protocol
2: 0-50 30”-0-100 PSIG 3: 0-4000 PSIG 1: ¼” MPT 1: Standard Assembly TF2: 1/8” Tube Alarm Station
3: 0-100 30”-0-200 PSIG 5: 0-1000 PSIG 2: ¼” Tube Fitting (PSIG/kPa Gauges) TF4: ¼” Tube (110V)
4: 0-250 0-400 PSIG 6: 0-300 PSIG 3: Diaphragm Valve 2: Standard Assembly TF6: 1/8” Tube B: Protocol
¼” Tube Fitting (BAR/PSIG Gauges) Alarm Station
7: 0-150 30”-0-200 PSIG 7: 0-400 PSIG M06: 6mm Tube
4: Diaphragm Valve 4: Cleanroom Assembly (220V)
8: 0-6000 PSIG*
¼” MPT (PSIG/kPa Gauges) CGA C: Protocol
5: Needle Valve 5: Cleanroom Assembly Switchover
*Maximum inlet DIN 477
pressure 4500 ¼” MPT (BAR/PSIG Gauges) Station
BS 341
PSIG (310 BAR) 6: 1/8” Tube Fitting and others D: Deep Purge*
with PCTFE Seat G: Protocol
Capsule® 7: 3/8” Tube Fitting available
Switchover
8: Diaphragm Valve Station with
1/8” Tube Fitting Alarm (110V)
9: Diaphragm Valve H: Protocol
¼” FPT Switchover
A: 3/8” BSP Station with
Right Hand Fitting Alarm (220V)
M: 6mm Tube Fitting M: Protocol
S: Diaphragm Valve Station
6mm Tube Fitting *Not available with 4500
PSIG max inlet pressure

• Captured Vent Kit (550-0001)
Options • Helium Leak Certification (476-0002)
-39-
Single Stage
Piston-Sensed
Ultra-High
Pressure
Chrome-Plated 492-5952 shown
Brass Barstock Body Typical Applications Advanced Features

• Airplane strut charging • Chrome-plated brass barstock body
• Research and development laboratories Smooth surface finish
• Chemical manufacturing • Front and rear panel mountable
• Aerospace hydraulic systems Versatile system configuration
The 492 Series regulators are intended
• Pharmaceutical manufacturing • Pressure ranges 0-750 to 0-6000 PSIG
for primary pressure control of non-
• Gauge calibration Broad range of applications
corrosive gases at a maximum inlet
pressure of 6000 PSIG. • Six-port design
Flexible installation alternatives
Features Materials Specifications

• Large piston sensor Body Maximum Inlet Pressure
Safely control pressures to 6000 Chrome-plated brass barstock 6000 PSIG (420 BAR)
PSIG Bonnet Temperature Range
• Capsule® seat Chrome-plated brass barstock -40°F to 140°F (-40°C to 60°C)
Increased serviceability and life Gauges
Seat
• Low wetted surface area PCTFE (3000 and 4500 PSIG inlet) 21⁄2” diameter chrome-plated brass
Minimal purge requirements Arlon® (PEEK) (6000 PSIG inlet) Ports
• Field-adjustable pressure limit Piston 1⁄4” FPT
Safeguard downstream equipment Brass barstock Cv
Filter 0.1
10 micron sintered brass Weight (492-4851-680)
Internal Seals 5.59 lbs. (2.54 kg)
Viton®
492- A B C D -Inlet Options
Series Outlet Outlet Inlet Inlet Outlet Assembly/ Inlet Installed
492 Pressure Gauge Maximum Gauge Assemblies Gauges Connections Options
1: 0-750 0-1000 PSIG 0: 6000 PSIG None 0: 1⁄4” FPT 0: Bare Body* CGA A: Protocol
2: 0-1500 0-4000 PSIG 3: 3000 PSIG 0-4000 PSIG 1: 1⁄4” MPT 1: Standard DIN 477 Alarm Station
3: 0-2500 0-4000 PSIG 8: 5500 PSIG 0-6000 PSIG 2: 1⁄4” Tube Assembly BS 341 (110V)
4: 0-4500* 0-6000 PSIG 9: 6000 PSIG 0-10,000 PSIG 5: Needle Valve (PSIG/kPa and others B: Protocol
1⁄4” MPT Gauges) available Alarm Station
5: 0-6000† 0-10,000 PSIG
6: 1⁄8” Tube 2: Standard (220V)
6: 0-3500* 0-6000 PSIG
Assembly C: Protocol
7: 3⁄8” Tube
(BAR/PSIG Switchover
*Not available with 3000 PSIG M: 6mm Tube Gauges)
maximum inlet pressure Station
G: Protocol
†Only available with 6000 PSIG *6000 PSIG Switchover
maximum inlet pressure maximum inlet only
Station with
Alarm (110V)
H: Protocol
Switchover
Station with
Alarm (220V)
M: Protocol
Station
Options
304-312_GCacc-Gas.qxp 11/29/2010 10:07 PM Page 309
GC ACCESSORIES | GAS PURIFICATION ESSENTIALS

Gas Regulators
Silcosteel® Regulators
Single and dual stage regulators are now available with Silcosteel® surface treatment.
This proprietary passivation process, developed by SilcoTek™, provides excellent inert- NEW!
ness for sulfur and mercury calibration standards and improved corrosion resistance
over bare 316L stainless steel or other more expensive alloys.
Silcosteel® treated sampling and transfer systems allow oil and gas exploration, chemi-
cal and petrochemical plants, and refineries to obtain accurate sulfur and mercury data
the first time, every time, with no delay, sample errors, or false readings, down to part-
per-billion (ppb) levels. Analysts charged with monitoring sulfur and mercury levels in
process streams can save thousands of dollars in improved yields, better test cycle times,
and improved system reliability.
Applications:
• CEM Continuous Emission Monitoring
• Environmental Stack and Gas Emission Standards
• Low level sulfur and mercury analysis
• Reactive or corrosive gases
• Off-shore platform systems
• Corrosive and salt water exposure
Outlet pressure: 0 to 100 psig
Outlet gauge: 30" – 0 to 200 psig
Inlet gauge: 0 to 4000 psig
Outlet assembly: diaphragm valve, 1/4" tube fitting
Description qty. cat.# price

Single-Stage Regulator
CGA 330 (H2S and other reduced sulfurs) ea. 21361-5
CGA 350 (H2, P5) ea. 21361-6
CGA 660 (NO, NO2, SO2) ea. 21361-11
Dual-Stage Regulator
CGA 330 (H2S and other reduced sulfurs) ea. 21360-2
CGA 350 (H2, P5) ea. 21360-7
CGA 660 (NO, NO2, SO2) ea. 21360-12
For other CGA fittings, please contact your local Restek representative.
also available
Regulators for use
with gas standards.
See pages 433-434.
www.restek.com 309

Gas Regulators
Overview of Restek’s Ultra-High Purity (UHP) Gas Regulators
• Regulators feature metal-to-metal seals throughout for long-term leak-tightness.
• Metal diaphragm outlet valve ensures gas purity.
• Each regulator is helium leak-test-certifiable to 1x10-8 scc/sec.
• Temperature range: -40 °C to 60 °C
Ultra-High Purity (UHP) Brass Body Gas Regulators

UHP brass regulators are the best choice when using ultra-high purity carrier gas for
sensitive GC applications using MS, PID, or ECD detection methods. They feature
reduced internal dead-volume, relative to stainless steel bodies. The metal valve
diaphragm ensures leak-free shut-off. Oxidation-resistant chrome plating maintains a
like-new appearance.
Dual-Stage Ultra-High Purity Chrome-Plated Brass Gas Regulators

• Oxidation-resistant, chrome-plated.
• Most stable outlet pressure control.
• Secondary pressure regulation not needed.
• Most widely used regulator.
• Less internal volume than stainless steel gas regulators.
Inlet gauge: 0 to 4,000psig (0-27,579kPa)
Fitting Outlet Pressure Outlet Gauge qty. cat.# price
CGA 580 (N2 He, Ar) 0 to 100psig (0-689kPa) 30" – 0 to 200psig (0-1379kPa) ea. 21667
CGA 350 (H2, P5) 0 to 100psig (0-689kPa) 30" – 0 to 200psig (0-1379kPa) ea. 21668
CGA 590 (Air) 0 to 100psig (0-689kPa) 30" – 0 to 200psig (0-1379kPa) ea. 21669
Single-Stage Ultra-High Purity Chrome-Plated Brass Gas Regulators

• Use when there is secondary pressure regulation downstream.
• Identical gas purity protection as with dual-stage gas regulators.
CGA 580 (N2, He, Ar) 0 to 100psig (0-689kPa) 30" – 0 to 200psig (0-1379kPa) ea. 20646
Ultra-High Purity Chrome-Plated Brass Line Gas Regulator

• Use where you need to reduce the line pressure by 20 psig (138 kPa) or more.
• Same purity protection as high-pressure cylinder regulators.
1
Inlet connections: /4" FPT
1
Outlet assembly: /4" FPT port
1
/4" female NPT ports* 0-50psig (0-345kPa) 30" - 0 to 100psig (0-689kPa) ea. 21666
1
/4" female NPT ports* 0-100psig (0-689kPa) 30" - 0 to 200psig (0-1379kPa) ea. 22452
*Order appropriate male connector, pipe-to-tube fittings.
Swagelok® Male Connector, Pipe-to-Tube Fittings

Fitting Type Size Similar to Brass Stainless Steel
(inches) Swagelok qty. cat.# price qty. cat.# price
1
Male Connector /4" to 1/4" NPT 400-1-4 10-pk. 23134 $44 2-pk. 23184
1
Male Connector /8" to 1/4" NPT 200-1-4 10-pk. 23136 $50 2-pk. 23186
23134 23179 Tube End Reducer 1
/4" to 1/8" 200-R-4 5-pk. 23129 $29 2-pk. 23179
310 www.restek.com

Gas Regulators and Accessories
Ultra-High Purity (UHP) Stainless Steel Body Gas Regulators
UHP stainless steel regulators are the standard for ultra-high-purity and corrosion-
resistant pressure regulation. They are more easily purged of atmospheric components,
compared to brass gas regulators, making them ideal for the most demanding applica-
tions. Stainless steel is especially useful in atmospheres of dry corrosive gases such as
hydrogen.
Dual-Stage Ultra-High Purity Stainless Steel Gas Regulators

• Most stable outlet pressure control.
• Secondary pressure regulation not needed.
Single-Stage Ultra-High Purity Stainless Steel Gas Regulators

• Use when there is secondary pressure regulation downstream.
• Identical gas purity protection as with dual-stage gas regulators.
Flexible Stainless Steel Hoses

Description Length Fittings qty. cat. # price
1
Flexible Stainless Steel Hose 36" /4" Female NPT ea. 21339
1
Flexible Stainless Steel Hose 18" /4" Female NPT ea. 21340
Flexible Stainless Steel Hose 36" Stainless Steel CGA 580 ea. 21344
Flammable Gas Flash Arrestor—Factory Mutual Approved*

• Gas flow shuts off in the event of a flashback.
• Flame extinguished—flame front prevented from reaching the gas supply.
• No gas flow restriction under normal operating conditions.
Description qty. cat.# price 21334
Flammable Gas Flash Arrestor, Brass Body ea. 21334
*Approved for brass body servicing hydrogen, acetylene, propane, or natural gas only.
CGA Fittings
CGA-specified nuts and nipples with internal frit, 1/4-inch NPT nickel-plated brass.
CGA 580 Fitting, (N2, He, Ar) ea. 21336
21336
CGA 350 Fitting, (H2, P5) ea. 21337
CGA 590 Fitting, (Air) ea. 21338
ordering note
International Fittings
All gas regulators are available with the following BS (British Standard) and DIN
(German Industrial Standards Organization) connections. Please contact your local
Restek representative for more information.
BS 341 #01 BS 341 #08 BS 341 #15 DIN 477 #06 DIN 477 #10 DIN 477 #14
BS 341 #02 BS 341 #10 DIN 477 #01 DIN 477 #07 DIN 477 #11 DIN 477 #15
BS 341 #03 BS 341 #13 DIN 477 #03 DIN 477 #08 DIN 477 #12
BS 341 #04 BS 341 #14 DIN 477 #05 DIN 477 #09 DIN 477 #13
www.restek.com 311

Gas Pressure System Accessories
Critical Purity Automatic Switchover System for
Noncorrosive Gases
High-purity automatic
switchover systems pro-
vide a continuous supply 21322
of high purity gas to the
laboratory, process, or Universal Cylinder Wrench
instrument, to allow you Use this versatile wrench for tightening gauges and gas regulator
to replace a depleted gas CGA fittings to cylinder outlets and pipe thread connections.
source without interrup- 20668580
tion in the gas supply. Continuous gas supply is achieved by set- Universal Cylinder Wrench ea. 21322
ting the two regulators at slightly different pressures and dis-
charging one side of the system at a time. These models include
flexible, all-stainless-steel pigtails with armor casing. The CGA
connection on each pigtail has a check valve in the gland to pre-
vent contamination and minimize purging requirements. 20635
Switching pressure: 200psig/170psig (1379/1172kPa)
Inlet connections: flexible SS pigtails (36") Backpressure Gas Regulator
Line regulator: 0 to 100psig (0-689kPa) Capillary GC inlet systems have backpressure regulators to
Brass Automatic Switchover System maintain a constant upstream pressure and rapidly respond to
with Line Regulator qty. cat.# price catastrophic leaks. The 0–60 psig (0-414 kPa) operating range is
CGA 580 (N2, He, Ar) ea. 20668580 sufficient to operate a 105 m, 0.25 mm ID column at its opti-
CGA 350 (H2, P5) ea. 20668350 mum flow rate.
CGA 590 (Air) ea. 20668590
Stainless Steel Automatic Switchover System Description qty. cat.# price
with Line Regulator qty. cat.# price Backpressure Gas Regulator ea. 20635
CGA 580 (N2, He, Ar) ea. 21593580
MINICYL Regulator
This compact general purpose regulator
Protocol Station has many laboratory applications
The protocol station is designed including air-drying glassware, sparging
for convenient wall mounting or evaporating solutions, and control-
of high-purity gas regulators. ling pneumatic valves. It is constructed
Wall mounting provides ease of of lightweight aluminum with an elas-
21347
use, prevents gas regulator dam- tomer diaphragm. Includes a 0–60 psig
age, and improves safety. Either (0-414 kPa) gauge and either 1/8- or
chrome-plated brass or 316 1
/4-inch tube fittings. 20610
stainless steel option is complete with a 3-foot, flexible, all-stain- Description Fittings qty. cat.# price
less-steel pigtail with armor casing. The CGA connection on the MINICYL Regulator 1
/8" Fittings ea. 20610
pigtail has an integral check valve in the gland to prevent MINICYL Regulator 1
/4" Fittings ea. 20611
contamination during cylinder changeout.
Chrome-Plated Brass Protocol Station* qty. cat.# price
CGA 580 (N2, He, Ar) ea. 21347
CGA 350 (H2, P5) ea. 21348 23400
CGA 590 (Air) ea. 21349
Stainless Steel Protocol Station* qty. cat.# price
CGA 580 (N2, He, Ar) ea. 21327 23401
*Pressure regulator not included. Order separately. 21333
23402
Cylinder Holders, Wall Mounted
Prevent serious injuries! These holders are designed to prevent
free-standing gas cylinders from tipping over and injuring per-
21321 sonnel. The cast aluminum holder can be secured to a wall or the
side of a work bench. Each mount will secure a cylinder 4-15
Cylinder Valve Wrench inches in diameter.
This specially-designed wrench enables easy opening of cylinder
valves that are fitted with a hand wheel. It is also suitable for Description Size qty. cat.# price
removing difficult cylinder caps. Cylinder Holder, Wall Mounted Single ea. 21333
Cylinder Holder, Wall Mounted Double ea. 23400
Description qty. cat.# price Cylinder Holder, Wall Mounted Triple ea. 23401
Cylinder Valve Wrench ea. 21321 Cylinder Holder, Wall Mounted Four ea. 23402
312 www.restek.com
408-437_AIR.qxp 11/22/2010 8:14 PM Page 434
SAMPLE HANDLING | AIR MONITORING

Regulators

Scotty® (Air Liquide) 14 Scotty® (Air Liquide) 48
Contents: 14 liters Contents: 48 liters
Pressure: 240 psig (17 bar) Pressure: 300 psig (21 bar)
Outlet Fitting: CGA 160 Outlet Fitting: CGA 165
Weight: 1.5 lbs/0.7 kg Weight: 1.75 lbs/0.8 kg
Dimensions: 3" diameter x Dimensions: 4" diameter x
11" height (7.6 x 28 cm) 16 1/4" height (10.2 x 41 cm)
DOT Specifications: 4B240 DOT Specifications: 39 NRC
Please note: This cylinder is not approved
for use in Canada.

Regulators
for use with 14-liter and 48-liter Scott (Air Liquide) Transportable Gases
Specifications: Materials of Construction:
Maximum Inlet Pressure: 300 psig Body: Brass
Outlet Pressure Range: 2–10 psig Diaphragm: Viton®
Maximum Delivery Pressure: 25 psig Seat: Acetal
Operating Temperature Range: Seal: Viton®
35 °F to 150 °F (2 °C to 65 °C)
Outlet Connection: 1/4" female NPT
Use the CGA 160 inlet connection with 14-liter Scott/Air Liquide Transportable
Gases. Use the CGA 165 inlet connection with 48-liter Scott/Air Liquide 22690
Transportable Gases.
Regulator, CGA 160 Inlet Connection ea. 22690
Regulator, CGA 165 Inlet Connection ea. 22691
Syringe Adapter Kit for Single-Stage VOC Regulator

Use to withdraw sample from a high-pressure cylinder after pressure reduction through
the high-purity VOC single-stage regulator.
Kit contains one nickel-plated brass 1/4" NPT to female luer fitting, which can be used
with an A-2 Luer syringe (cat.# 20162 or 20163, see page 385), and one stainless steel
1
/4" NPT x 1/8" compression fitting with septum (can be used with any syringe needle).
Syringe Adapter Kit kit 21118
21118
also available
Single-Stage and Dual-Stage
Ultra-High Purity Gas Regulators
See pages 309–311.
434 www.restek.com
408-437_AIR.qxp 11/22/2010 8:14 PM Page 433
SAMPLE HANDLING | AIR MONITORING

Regulators
Gas Regulators for Transportable Cylinders
For this cylinder: Use this regulator:
DCG Partnership Cylinders: Mini-Regulator for natural gas and refinery gas standards
Size: 7.6 x 24 cm • 0–300 psig inlet pressure range.
CGA-170/110 connection. • 0–15 psig outlet pressure range.
US DOT Specs: DOT-4B-240ET • Supplied with 0–15 psig outlet pressure gauge, brass
CGA 170 nut and nipple.
Please note: This cylinder is not
approved for use in Canada. 22032
Mini-Regulator ea. 22032
Spectra (Linde) 104L: Scotty® (Air Liquide) 110L

Aluminum construction (Pi-marked Cylinders
Size: 8 x 24 cm for EU Regulations):
Volume/Pressure: Aluminum construction
104 liters of gas Size: 8.3 x 29.5 cm
@ 1,800 psi Volume/Pressure:
CGA-180 outlet fitting. 110 liters of gas @ 1,800 psi
Weight: 1.5 lbs/0.7 kg CGA-180 outlet fitting.
Weight: 2.2 lbs/1 kg
DOT Specifications: 3AL2216
Spectra Gas 7621 High-Purity VOC Regulator

• Single-stage, stainless steel.
• Two pressure gauges and CGA-180 fitting.
• 3,000 psig maximum inlet pressure.
• Stainless steel diaphragm and Kel-F® seat.
• 1
/8-inch tube compression outlet.
• Low internal volume: 3.03 cc.
• Accurate pressure control even at low flow rates.
• Individually tested for leaks and impurities.
21572
0–30psig outlet pressure gauge ea. 21572
0–100psig outlet pressure gauge ea. 21572-R100
See next page for a syringe adapter kit.
Continued on next page.
www.restek.com 433
flow, pressure, and on/off control devices
Flow, Pressure, and On/Off

Control Devices
This section includes stainless needle valves, our combination on/off needle
valves, high pressure prime/purge and on/off valves, and VICI pressure regulators
and flow controllers.
Because cast parts can introduce porosity and contamination, every VICI control
device is assembled from components which are precision-machined from bar
stock. This assures that every item has the same high quality workmanship, with
careful assembly and testing to rigid standards.
On/Off and Prime/ Purge Valves

Valco high pressure on/off or The valve needle is made from a
prime/purge valves feature quality special high strength alloy which is
engineering, precision machining, and resistant even to the buffer salts which
extremely low internal volume (< 2 µl), might accidentally precipitate inside
making them the ideal choice in the the valve. Seals are fluorocarbon, with
most demanding liquid or supercritical valve bodies machined from HPLC
fluid chromatography or extraction grade stainless steel, ensuring long
systems.* The on/off function is self- lifetime in even the most demanding
explanatory; in prime/purge models, situations.
mobile phase flows around the needle
The on/off and prime/purge valves are
when the valve is closed, relieving
available in manual or air/CO2 actuated
the back pressure from the column.
versions. The automated valves
When the valve opens, mobile phase
require a single three-way solenoid:
vents to waste to prime the pump.
application of 50 psi opens the valve;
Standard models provide leak-tight venting the air allows the spring to
operation up to 10,000 psi (690 bar) at return the valve to the closed position.
100°C, with high temperature versions ultra-high
rated up to 6,000 psi/300°C. A 1/16" pressure valves
fitting model with a larger bore and See our new 40,000 psi
a 1/8" fitting model are available for on/off and prime/purge
valves
high flow applications. *Not suitable for use with gases. page 85
. . . . . . . . . . .
CHROMalytic TECHnology Pty Ltd AUSTRALIAN Distributors e-mail: sales@chromtech.net.au Tel: 03 9762 2034
212 | VICI AG International Sales: + 41–41–925–6200 Fax: + 41–41–925–6201 | www.vici.com
On/Off and Prime/Purge Valves
On/off valves
specs Manual Manual Air actuated Air actuated
Temp Pressure with 4" standoff with 1" standoff with 4" standoff
Fitting size Bore Prod No Prod No Prod No Prod No
Standard temperature
1/16" 100°C 10,000 psi Standard temperature
1/16" 0.50 mm SFVO ––– ASFVO –––
High temperature / 0.75 mm SFVOL ––– ASFVOL –––
high pressure
High temperature / high pressure
1/16" 300°C 6,000 psi 1/16" 0.50 mm SFVOHT SFVOHT4 ASFVOHT ASFVOHT4
1/8" 300°C 2,000 psi 0.75 mm ––– ––– ASFVOLHT ASFVOLHT4
1/8" 1.50 mm ––– ––– ASFVO2HT ASFVO2HT4
Prime/purge valves
specs Manual Air actuated Air actuated
Temp Pressure with 1" standoff with 4" standoff
Fitting size Bore Prod No Prod No Prod No
Standard temperature
1/16" 100°C 10,000 psi Standard temperature
1/16" 0.50 mm SFV ASFV –––
High temperature / 0.75 mm SFVL ASFVL –––
high pressure
High temperature / high pressure
1/16" 300°C 6,000 psi 1/16" 0.50 mm ––– ASFVHT ASFVHT4
1/8" 300°C 2,000 psi 0.75 mm ––– ASFVLHT ASFVLHT4
1/8" 1.50 mm ––– ASFV2HT ASFV2HT4
Air actuator option On/off valve Prime/purge valve
mobile
mounting holes phase in
(1.00" center)
inlet vent to waste;

pump is primed
back pressure
from column
is relieved
outlet
to
column
air inlet/outlet
(60 psi actuation)
open position open position
mobile
phase in
inlet outlet
closed
outlet
closed
to
column
closed position closed position

www.vici.com | Valco Instruments Co. Inc. Sales: 800–367–8424 Fax: 713–688–8106 | 213
Combo Valves
A new generation needle and shut-off O-ring seals. Maximum temperature

valve provides screwdriver-adjustable is 100°C, and maximum inlet pressure
control and positive shut-off without is 100 psig. The valve can be panel-
damage to the needle. It is ideal for mounted in an 11/16" or 3/4" hole,
providing hydrogen and air to an FID, using hardware supplied, and all are
since the flow setting is not changed supplied with Valco 1/16" ZDV fittings.
by turning the valve on and off. It can Other configurations are available in
also be used to supply make-up or OEM quantity upon request.
combustion gas in a wide variety of
The standard knob is silver-colored
applications.
and .62" long. Colored knobs for gas
The valve body materials are anodized identification are available separately,
aluminum or stainless steel, with Viton in two lengths.
Combo valves
Maximum flow Aluminum Stainless specs
@ 40 psi He or N2 body body Inlet pressure:
Prod No Prod No 100 psi
Maximum
10 ml/min CNV1A10S1 CNV1S10S1 temperature:
50 ml/min CNV1A50S1 CNV1S50S1 100°C
150 ml/min CNV1A150S1 CNV1S150S1

Optional colored knobs Standard Long

(.62") (1.25")
Prod No Prod No INLET
Green CNVEKG CNVEKLG

Red CNVEKR CNVEKLR
Blue CNVEKU CNVEKLU OUTLET
Silver CNVEKS CNVEKLS
Black CNVEKB CNVEKLB

Condyne Combo Valves
Very similar in function to the Valco temperature of 100°C. The valve can
combo valves, these are the original, be panel mounted through an 11/16"
hex-bodied combo valves made by or 3/4" diameter hole. Valco 1/16"
the Condyne division of VICI Metronics fittings are standard, but 1/8" fittings
for nearly 30 years. Condyne products are also available. Nuts and ferrules
have been transferred to the Valco are included.
Houston location, where a number of
improvements have been made. Typically, the knob color is used as
an indicator of the rated flow, but
Standard construction features the standard knob can be changed
an anodized aluminum body with if desired. A longer version of the
Viton O-ring seals. Maximum inlet knob is also available, as is an all brass
pressure is 100 psi, with a maximum valve (in OEM quantities). Consult the
factory regarding these options.
Condyne combo valves

specs Maximu m flow 1/16" 1/8"
Maximum inlet @ 40psi He or N2 Valco fittings Valco fittings
pressure: Knob Prod No Prod No
100 psi color
Maximum tem-
perature: 10 ml/min Green CVA10GS1 CVA10GS2
100°C 50 ml/min Red CVA50RS1 CVA50RS2
150 ml/min Blue CVA150US1 CVA150US2
500 ml/min Black CVA500BS1 CVA500BS2

1 liter/min Yellow CVA1KYS1 CVA1KYS2
Gas Flow Controllers
Flow controllers provide a stable flow shut-off is provided by an integral

rate under varying pressure. VICI flow Viton-sealed adjustment valve.
controllers are precision machined
With all our flow controllers, the inlet
from aluminum or stainless bar stock
pressure must exceed the outlet
to eliminate the contamination often
pressure by 10 psi.
found in die cast parts. Positive flow
Model 100 gas flow controller Fixed span upstream referenced flow controller
The Model 100 is available in a variety of preset maximum specs
flow rates, from 150 mL/min to 10 liters/min (N2 at 40 psi). Preset max flow rates:
150 mL/min to
Any flow controller in this series can be ordered with a 10 liters/min
10-turn Spectrol digital dial (3 or 4 digits), to permit a visual (N2 at 40 psi).
indication of the flow setting. Maximum inlet
pressure:
All flow rates listed below are based on N2 at 40 psi inlet 200 psi
pressure. Maximum inlet pressure is 200 psi. Maximum temperature:
100°C
Standard fittings:
Aluminum body Aluminum body SS body SS body
■ 1/8" external tube
Viton diaphragm SS diaphragm Viton diaphragm SS diaphragm fittings (EAOR22)
Flow rate
/min Prod No Prod No Prod No Prod No Other fittings are
available. Contact
With standard control knob the factory for further
0 - 150 mL FC10AV1K FC10AS1K FC10SV1K FC10SS1K information.
0 - 250 mL FC10AV2K FC10AS2K FC10SV2K FC10SS2K
0 - 1.2 L FC10AV4K FC10AS4K FC10SV4K FC10SS4K

alternate fitting
types
With Spectrol 3-digit dial Models 100 and 300
0 - 150 mL FC10AV1S3 FC10AS1S3 FC10SV1S3 FC10SS1S3 The standard is the
0 - 250 mL FC10AV2S3 FC10AS2S3 FC10SV2S3 FC10SS2S3
0 - 850 mL FC10AV3S3 FC10AS3S3 FC10SV3S3 FC10SS3S3 EAOR22 1/8" external
tube fitting. Alternative
0 - 1.2 L FC10AV4S3 FC10AS4S3 FC10SV4S3 FC10SS4S3 fitting types are listed
0 - 4.5 L FC10AV5S3 FC10AS5S3 FC10SV5S3 FC10SS5S3 below. Order separately.
0 - 10.0 L FC10AV6S3 FC10AS6S3 FC10SV6S3 FC10SS6S3
Internal
With Spectrol 4-digit dial fitting with
0 - 150 mL FC10AV1S4 FC10AS1S4 FC10SV1S4 FC10SS1S4 O-ring seal
0 - 250 mL FC10AV2S4 FC10AS2S4 FC10SV2S4 FC10SS2S4 Prod No Price
1/8" to
0 - 1.2 L FC10AV4S4 FC10AS4S4 FC10SV4S4 FC10SS4S4 5/16-24 ZAOR22 $14
1/16" to
5/16-24 ZAOR12 14
Model 202
The standard 1/8" NPT
female pipe thread with
pipe adapters to 1/16" OD
tubing included. Another
which kind of controller? adapter is listed below.
An upstream-referenced controller Order separately.
maintains the flow rate as long as the
1/8" NPT
upstream (inlet) pressure is held constant.
male
A downstream-referenced controller pipe to Prod No Price
maintains a constant flow under constant Valco
downstream (outlet) pressure. internal
1/8" PZA22 $14

Gas Flow Controllers
Model 202 gas flow controller Adjustable span upstream-referenced flow controller
specs The Model 202 provides a user-variable span adjustment
Flow range:
infinitely adjustable
permitting it to be used for a variety of flow ranges. After
Min: 5 mL/min the span is adjusted, the flow controller has a full 10 turns of
Max: 1.6 L/min resolution between the minimum and maximum flow rates.
(N2 at 40 psi) When equipped with a Spectrol digital dial, settings are
Maximum inlet reproducible to better than 1%.
pressure:
200 psi
Maximum temperature: Aluminum body Aluminum body SS body SS body
100°C Viton diaphragm SS diaphragm Viton diaphragm SS diaphragm
Standard fittings: Prod No Prod No Prod No Prod No
■ 1/8" NPT female pipe
With standard control knob FC22AV1K FC22AS1K FC22SV1K FC22SS1K
threads
■ Pipe adapters to With Spectrol 3-digit dial FC22AV1S3 FC22AS1S3 FC22SV1S3 FC22SS1S3
1/16" OD tubing
are included. With Spectrol 4-digit dial FC22AV1S4 FC22AS1S4 FC22SV1S4 FC22SS1S4
Other fittings are
available. (See facing
page.)
Model 300 gas flow controller Fixed span downstream-referenced flow controller
specs The Model 300 flow controller provides a stable flow rate
Maximum flow rate: when upstream pressure conditions vary, providing the
1.6 L/min
with ambient downstream pressure remains constant.
downstream pressure
All flow rates listed below are based on N2 at 40 psi inlet
Maximum inlet
pressure:
pressure. Maximum inlet pressure is 200 psi.
200 psi
Maximum temperature:
100°C
Standard fittings:
Aluminum body Aluminum body SS body SS body
■ 1/8" external tube
fittings (EAOR22) Viton diaphragm SS diaphragm Viton diaphragm SS diaphragm
Flow rate
Other fittings are /min Prod No Prod No Prod No Prod No
available. (See facing
page.) Contact the With standard control knob
factory for further 0 - 200 mL FC30AV1K FC30AS1K FC30SV1K FC30SS1K
information. 0 - 300 mL FC30AV2K FC30AS2K FC30SV2K FC30SS2K

With Spectrol 3-digit dial


With Spectrol 4-digit dial


more information With screwdriver adjustable operator

Male pipe adapters 0 - 750 mL FC31AV1
Internal . . . . . . . . page 38
External . . . . . . . . . . . . . . 39
Micrometering Valves
Micrometering (needle) valves switching in multidimensional systems

combine the ease of connection while keeping the gases at oven
associated with Valco zero dead temperature.
volume fittings with convenient
Valves are rated for maximum of
bulkhead mounting. The very low
1000 psi gas. They are individually
internal volume and precision design
tested on a mass spectrometer
make this valve ideal for use as a gas
leak detector to a helium leak rate
control valve in chromatographic
specification of < 1 x 10-8 atm cc/sec.
systems.
An unlubricated version with a
The Viton® model is rated at 225°C,
specially polished seat was designed
while a version with Kalrez™ seals is
to be used with our pulsed discharge
capable of continuous operation at
detectors, and should be used
315°C. This allows a needle valve to
upstream of any ultrapure gas system.
be mounted directly within a heated
There is also a 1/16" tube version.
oven, facilitating control of flow
1/16" micrometering valves with Valco fittings

Seal Lubrication Prod No
Standard: 2–225 ml/min@ 15 psi N2 inlet
Viton Lubricated ZBNV1
Viton Non-lubricated ZBNV1-D
INLET
Kalrez Non-lubricated ZBNV1-KZ
Fine control: 2–175 ml/min@ 15 psi N2 inlet
Viton Lubricated ZBNV1F OUTLET
Viton Non-lubricated ZBNV1F-D
Kalrez Non-lubricated ZBNV1F-KZ
Low flow: 2–90 ml/min@ 40 psi N2 inlet
Viton Lubricated ZBNV1LF
Viton Non-lubricated ZBNV1LF-D
Kalrez Non-lubricated ZBNV1LF-KZ
1/16" micrometering valves with 18" tubes

Seal Lubrication Prod No
Standard: 2–225 ml/min@ 15 psi N2 inlet
Viton Lubricated BNV1
Viton Non-lubricated BNV1-D
Kalrez Non-lubricated BNV1-KZ
Low flow: 2–90 ml/min@ 40 psi N2 inlet
Viton Lubricated BNV1LF
Viton Non-lubricated BNV1LF-D
Kalrez Non-lubricated BNV1LF-KZ
Combo Pressure Regulators
The VICI combo regulator is a diameter) saves panel space and

combination regulator and shut-off permits installation anywhere that an
valve. The pressure is set using the 11/16" hole can be located. Mounting
screwdriver adjustment in the center hardware is supplied.
of the on/off knob. Turning the knob
Available with outlet pressure ranges
counterclockwise provides positive
of 0-15 psi, 0-30 psi, or 0-60 psi, these
shutoff, while clockwise rotation
regulators can be ordered with 1/16"
restores gas pressure to within 0.05 psi
or 1/8" Valco internal fittings or 1/8"
of the setpoint.
external fittings. Other configurations
The regulator is machined from are available in OEM quantities.
aluminum bar stock and then hard-
Maximum operating temperature is
anodized to provide contamination-
100°C, and maximum supply pressure
free service. It features a stainless steel
is 250 psig. The influence of supply
diaphragm and Viton®-sealed stainless
pressure on outlet pressure is less than
poppet. The compact size (3" x 1.125"
0.1 psi per 10 psi change in supply
pressure.
Combo pressure regulators

specs Valco internal Valco internal External
Maximum inlet fittings fittings fittings
pressure: 1/16" 1/8" 1/8"
250 psi Pressure Prod No Prod No Prod No
Maximum range:
temperature: 0-15 psi PR50A15Z1 PR50A15Z2 PR50A15E2
100°C
0-30 psi PR50A30Z1 PR50A30Z2 PR50A30E2
Wetted materials: 0-60 psi PR50A60Z1 PR50A60Z2 PR50A60E2
■ Anodized
aluminum
■ Stainless steel
■ Viton
adapters used for valco and condyne control devices

Prod No Price Used for
ZAOR11 $14 Diaphragm valve; Description

optional on on/off valves
Valco 1/16" internal to 10-32 female
ZAOR12 14 Optional for Model 100 Valco 1/16" internal to 5/16-24 O-ring seal
and 300 flow controllers
ZAOR22 14 Optional for Model 100 Valco 1/8" internal to 5/16-24 O-ring seal
EAOR21 14 Air actuated prime/purge External 1/8" to 10-32 O-ring seal

and on/off valves
EAOR22 14 Standard on Model 100 External 1/8" to 5/16-24 O-ring seal

20L Steel CGA-160 240 20 3 13
LB Steel CGA-170/180 1800 55 2 15
103L Steel C-10** 1000 103 3 14
550L Steel *** 2200 550 4 24
A58L Aluminum C-10** 500 58 3.5 14.5
A76L Aluminum C-10** 500 76 4 16
A104L Aluminum CGA-180 1800 104 3 12
* CGA-160 = Same as 1/8; FNPT
** C-10 5/8;-18UNF
*** Standard CGA outlet depends on gas composition

GasStandards 15

Uploaded by

Copyright:

Available Formats

GasStandards 15

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

GasStandards 15

Uploaded by

Copyright:

Available Formats

Gas Reference Standards

TO-14A Calibration Mix (39components) TO-14A 43 Component Mix (43components)

TO-14A41 Component Mix (41 components)

428 www.restek.com RESTEK f/O! 87 2 :lO:l4

BTEXGas Mix (6 components)

Higher Concentration did you know?

please note Custom Gas Calibration

n 2nd Source TO-14AITO-15

430 www.restek.com RESTEK f/O! 87 2 :lO:l4

Natural Gas Standards

See regulators pages 433-434 for cylinder information.

n Methane in nitrogen (1%)

432 www.restek.com RESTEK f/O! 87 2 :lO:l4

For this cylinder: Use this regulator:

For these cylinders:

Spectra (Linde) 104L: Scotty· (Air Liquide) 11OL

Use these regulators:

Spectra Gas 7621 High-PurityVOC Regulator

Continued on next page.

Use these regulators:

Syringe Adapter Kitfor Single-Stage voe Regulator

434 www.restek.com RESTEK f/O! 87 2 :lO:l4

MESA Specialty Gas offers

LIST IN 14L (AUD) 504.00 616.00 560.00 560.00 616.00 560.00

STOCK #: 47968AW 32286AW 8994AW

CGA FITTINGS: 17, 34 LITER - CGA 600

OLD PART # NEW PART # DESCRIPTION

XD111420MX3 XD111420PM3 20 ppm Benzene, Toluene

Other concentrations available

CARBON MONOXIDE (CO)

ETHYLENE OXIDE (ETO)

HYDROGEN CYANIDE (HCN)

HYDROGEN SULFIDE (H2S)

11 liter aerosol BUMP GAS

Other mixtures available upon request

103 liter cylinders METHANE (CH4)

NITROGEN DIOXIDE (NO2)

Contact Customer Service for other mixture information

NITROUS OXIDE (N2O)

REGULATORS FOR 29 / 58 LITER ALUM. and 103 LITER STEEL CYL

REGULATORS w/MULTIPLE FLOW SETTINGS

DEMAND FLOW REGULATORS

500A N/A EMPTY CASES

CYLINDER TRANSPORT BAG

We recognize that only

MESA Specialty Gas offers

Part Number Output Range

Maximum Inlet 300 psig

Part Number Flow Rate

Body Brass Bar Stock

Maximum Inlet 500 psig

Standard Configuration Description

Standard Configuration Description

Special Configuration for Low Inlet Pressure Applications

Part Number Flow Rate

Body Brass Bar Stock

Maximum Inlet 1,000 psig

Part Number Gauge (psig) Inlet