Voestalpine Range of Supply Electrical Steel EN 030720

ELECTRICAL STEEL – isovac®
Range of supply
July 2020
voestalpine Steel Division

www.voestalpine.com/isovac
FULLY PROCESSED ELECTRICAL STEEL
Specific total loss Magnetic polarization
at 50 Hz at 50 Hz
Magnetic 1.0 T 1.5 T 2500 A/m 5000 A/m 10000 A/m Mechanical Yield strength 0.2 % yield strength Tensile strength Elongation Hardness
sample P10 P15 J25 J50 J100 sample ReH Rp0.2 Rm A80 HV5
Steel grade direction [W/kg] [W/kg] [T] [T] [T] direction [MPa] [MPa] [MPa] [%] [-]
isovac® fully processed
EN 10106 1) P10 P15 J25 J50 J100 ReH Rp0.2 Rm A80 HV5
isovac 235-35 A Long. + Trans. 0.80 2.10 1.51 1.61 1.74 Transverse 455 445 550 15 210
isovac 600-100 A Long. + Trans. 2.20 5.30 1.59 1.68 1.79 Transverse 410 385 520 32 180 2)
voestalpine special grade P10 P15 J25 J50 J100 ReH Rp0.2 Rm A80 HV5
1)
Steel grade designation deviates from standard
2)
Hardness HV10 [-]
2 ELECTRICAL STEEL – isovac ®

• R A N G E O F S U P P LY • 07/2 02 0 3
at 50 Hz at 50 Hz
isovac® fully processed high-perm
isovac HP 210-35 A Long. + Trans. 0.75 1.95 1.56 1.65 1.77 Transverse 435 430 540 15 200
isovac HP 230-50 A Long. + Trans. 0.94 1) 2.20 1) 1.57 1) 1.65 1) 1.77 1) Transverse 470 460 590 25 225
isovac HP 1300-100 A Long. + Trans. 3.60 8.50 1.67 1.75 1.86 Transverse 250 230 380 37 120 2)
isovac HP 1400-100 A Long. + Trans. 5.40 13.00 1.69 1.78 1.88 Transverse 385 275 360 39 110 2)
1)
Magnetic measurement pursuant to DIN IEC 60404-2, eroded edges
2)
Hardness HV10 [-]

• R A N G E O F S U P P LY • 07/2 02 0 5
at 50 Hz at 50 Hz
isovac® fully processed high-conductivity
isovac HP 235-35 A HC Long. + Trans. 0.80 2.00 1.60 1.69 1.81 Transverse 350 340 460 18 165
isovac 250-35 A HC Long. + Trans. 0.95 2.25 1.55 1.64 1.76 Transverse 355 340 480 25 160
isovac HP 250-50 A HC Long. + Trans. 0.95 2.25 1.60 1.69 1.81 Transverse – 380 505 19 195

• R A N G E O F S U P P LY • 07/2 02 0 7
at 50 Hz at 50 Hz
isovac® fully processed high-frequency
isovac 330-35 A HF Long. + Trans. 1.20 2.80 1.56 1.65 1.77 Transverse 400 370 520 30 165
isovac HP 270-50 A HF Long. + Trans. 0.95 2.25 1.58 1.67 1.79 Transverse 460 450 580 23 220
isovac HP 330-50 A HF Long. + Trans. 1.25 2.80 1.60 1.69 1.80 Transverse 385 370 510 30 180
isovac® fully processed high-strength

isovac 470-50 A HS Long. + Trans. 1.70 3.70 1.55 1.64 1.76 Transverse 560 525 635 26 220
1)
Hardness HV10 [-]

• R A N G E O F S U P P LY • 07/2 02 0 9
at 400 Hz 1) at 50 Hz 1)
isovac® automotive grades
EN 10303 2) P10 P15 J25 J50 J100 ReH Rp0.2 Rm A80 HV5
isovac HP NO25-13 Y420 Long. + Trans. On request On request On request On request On request Longitudinal On request On request On request On request On request
isovac HP NO27-14 Y420 Long. + Trans. 13.50 33.00 1.54 1.64 1.76 Longitudinal 440 435 550 19 180
isovac HP NO27-18 Y320 Long. + Trans. On request On request On request On request On request Longitudinal On request On request On request On request On request
isovac NO35-22 Y460 Long. + Trans. 21.40 51.00 1.51 1.60 1.72 Longitudinal 500 470 600 25 205
isovac NO35-26 Y500 Long. + Trans. 24.50 56.40 1.51 1.60 1.72 Longitudinal 560 530 630 27 210
Further NO grades are available upon request.
Indicated steel grades are excerpts from the isovac® product range.
1)
Magnetic measurement pursuant to DIN IEC 60404-2
2)

• R A N G E O F S U P P LY • 07/2 02 0 11
SEMI-PROCESSED ELECTRICAL STEEL
Magnetic values after final annealing according to EN 10341
Specific total loss Magnetic polarization Relative
at 50 Hz at 50 Hz permeability
Magnetic 1.0 T 1.5 T 2500 A/m 5000 A/m 10000 A/m 1.5 T Mechanical 0.2 % yield strength Tensile strength Elongation Hardness
sample P10 P15 J25 J50 J100 µr sample Rp0.2 Rm A80 HV5
Steel grade direction [W/kg] [W/kg] [T] [T] [T] [-] direction [MPa] [MPa] [%] [-]
isovac® semi-processed
EN 10341 1) P10 P15 J25 J50 J100 µr Rp0.2 Rm A80 HV5
isovac 560-50 K Long. + Trans. 1.80 4.10 1.64 1.72 1.84 2100 Transverse 440 490 18 180
isovac® semi-processed high-perm

voestalpine special grade P10 P15 J25 J50 J100 µr Rp0.2 Rm A80 HV5
isovac HP 290-50 K HE Long. + Trans. 1.10 2.85 1.60 1.68 1.80 1600 Transverse 420 470 22 185
isovac® semi-processed high-efficiency

EN 10341 1) P10 P15 J25 J50 J100 µr Rp0.2 Rm A80 HV5
isovac 340-50 K HE Long. + Trans. 1.25 3.15 1.57 1.66 1.78 1100 Transverse 455 500 17 190
1)

• R A N G E O F S U P P LY • 07/2 02 0 13
SEMI-PROCESSED ELECTRICAL STEEL
Magnetic values after final annealing according to EN 10341
Specific total loss Magnetic polarization Relative
at 60 Hz at 60 Hz permeability
Magnetic 1.0 T 1.5 T 2500 A/m 5000 A/m 10000 A/m 1.5 T Mechanical 0.2 % yield strength Tensile strength Elongation Hardness
sample P10 P15 J25 J50 J100 µr sample Rp0.2 Rm A80 HV5
Steel grade direction [W/Ib] [W/Ib] [T] [T] [T] [-] direction [MPa] [MPa] [%] [-]
isovac® CRML (Cold Rolled Motor Lamination)
ASTM A726-05 1) P10 P15 J25 J50 J100 µr Rp0.2 Rm A80 HV5
isovac 47D175 Long. + Trans. 0.66 1.65 1.60 1.68 1.80 1600 Transverse 420 470 22 185
Indicated steel grades are excerpts from the isovac® product range.
Additional CRML grades (Cold Rolled Motor Lamination) are available based on the ASTM A683 and ASTM A726-05 standard.
1)

• R A N G E O F S U P P LY • 07/2 02 0 15
COLD-ROLLED POLE SHEETS HOT-ROLLED POLE SHEETS
Magnetic polarization Magnetic polarization
Minimum value at 2) Minimum value at 1)
0.2 % yield Tensile 0.2 % yield Tensile Elongation 15000
strength strength Elongation 5000 A/m 15000 A/m strength strength min. [%] 5000 A/m A/m
Sample Rp0.2 min. Rm min. A80 min. J50 J150 Sample Rp0.2 min. Rm min. J50 J150
Steel grade direction [MPa] [MPa] [%] [T] [T] Steel grade direction [MPa] [MPa] A80 A5 [T] [T]
Cold-rolled pole sheets Hot-rolled pole sheets
Standard grades Standard grades
Rp0.2 Rm A80 J50 J150 Rp0.2 Rm A80 A5 J50 J150
according to EN 10265 according to EN 10265
250-TF-183 Transverse 250 325 16 1.60 1.83 250-TG-180 Transverse 250 350 22 26 1.60 1.80
voestalpine special grade Rp0.2 Rm A80 J50 J150 450-TG-179 Transverse 450 550 14 17 1.54 1.79
550-TF-177 1) Transverse 550 570 10 1.46 1.78 600-TG-178 Transverse 600 700 10 12 1.50 1.78
600-TF-176 1) Transverse 600 620 8 1.46 1.78 650-TG-178 Transverse 650 750 10 12 1.48 1.78
800-TF-178 1)
Transverse 800 980 6 1.46 1.78 700-TG-178 Transverse 700 800 10 12 1.46 1.78
Ultra-high-strength Rp0.2 Rm A80 A5 J50 J150
The values indicated in the table are guaranteed. voestalpine special grade
750-VA-175 Long. + Trans. 750 800 10 12 1.46 1.75
1)
On request
2)
DC (Direct current) 900-VA-175 Long. + Trans. 900 940 - 10 1.46 1.75
Measurement of fracture elongation: A

80 for thicknesses < 3 mm
A5 for thicknesses ≥ 3 mm
1)
DC (Direct current)

• R A N G E O F S U P P LY • 07/2 02 0 17
INSULATING VARNISH SYSTEMS DIMENSIONS
AND SERVICES
Deliverable insulating varnish systems Available dimensions: wide strip (coil)
Product variant Uncoated C-3 Backlack C-5 C-6 Thickness Width 1) Outside diameter Inside diameter
Product variant [mm] max. [mm] max. [mm] [mm]
isovac ®
isovac® 0.25 - 1.00 1600 2000 600

Cold-rolled pole sheets On request
Cold-rolled pole sheets 0.70 - 1.00 1600 2000 600
Range of properties for available insulating varnish systems Hot-rolled pole sheets 2.00 - 12.00 1620 (1750) 2000 600
Requirements C-3 Backlack C-5 C-6

Available dimensions: slit (slit strip)
Layer thickness 1 µm 2-4 µm 2-8 µm 1 µm 2-3 µm 3-10 µm
Thickness Strip width 1) Outside diameter Inside diameter
Layer thickness tolerance ± 0.5 µm ± 1.0 µm ± 1.0 µm ± 0.5 µm ± 1.0 µm ± 1.5 µm Product variant [mm] [mm] max. [mm] [mm]
Insulation resistance + ++ +++ ++ +++ +++ isovac® 0.25 - 1.00 19 - 1600 850 - 2000 500 / 600
Corrosion resistance + ++ ++ ++ +++ +++ Cold-rolled pole sheets 0.70 - 1.00 19 - 1600 850 - 2000 500 / 600
Punchability +++ +++ +++ ++ ++ ++
Al die casting ++ + + +++ ++ ++ Available dimensions: cut-to-length (sheet)
Weldability + + + +++ ++ + Thickness Width Length Package weight
Resistance to annealing + + + +++ ++ ++ Product variant [mm] [mm] [mm] max. [t]
Pressure resistance + + + +++ ++ +++ isovac® 0.25 - 1.00 300 - 1550 300 - 5000 6
Abrasion resistance +++ +++ +++ +++ ++ +++ Cold-rolled pole sheets 0.70 - 1.00 300 - 1550 300 - 5000 6
Burn-off repair + + + +++ ++ +++ Hot-rolled pole sheets 2.00 - 12.00 900 - 1620 (1750) 1250 - 14000 10
AISI C-3 C-3 C-3 C-5 C-5 C-6 1)
Indicated references are standard values. The available combinations of widths and thicknesses and supply forms vary depending on the
steel grade and insulating varnish system. Limitations are possible depending on thickness.
+ Not recommended ++ Recommended +++ Highly recommended
Selected services Customized thicknesses can be supplied for individual solutions.

Inside coil diameter Cost-saving advisory Material selection and Logistics advisory services to
of 500 mm services innovation advisory services effectively reduce lead times This document provides an overview of the electrical steel products supplied by the voestalpine Steel Division. Other
grades are available upon request. Please find further information and downloads under the following link:
Indicated references are standard values. Limitations are possible depending on thickness.
Available insulating varnish systems and combinations of widths and thicknesses vary depending
on the steel grade.
The information and product properties contained in this printed material are non-binding and serve the sole purpose of technical orientation.
They do not replace individual advisory services provided by our sales and customer service teams. The product information and characteristics
set forth herein shall not be considered as guaranteed properties unless explicitly stipulated in a separate contractual agreement. For this rea-
son, voestalpine shall not grant any warranty nor be held liable for properties and/or specifications other than those subject to explicit agree-
ment. This also applies to the suitability and applicability of products for certain applications as well as to the further processing of materials
into final products. All application risks and suitability risks shall be borne by the customer. The General Terms of Sale for Goods and Services of
the voestalpine Steel Division shall apply to all materials supplied by the voestalpine Steel Division and can be accessed using the following link:
www.voestalpine.com/stahl/en/The-Steel-Division/General-Terms-of-Sale
Technical changes are reserved. Errors and misprints are excepted. No part of this publication may be reprinted without explicit written
permission by voestalpine Stahl GmbH.

• R A N G E O F S U P P LY • 07/2 02 0 19
07/2020
voestalpine Steel Division

voestalpine-Straße 3
4020 Linz, Austria
productmanagement@voestalpine.com

Voestalpine Range of Supply Electrical Steel EN 030720

Uploaded by

Copyright:

Available Formats

Voestalpine Range of Supply Electrical Steel EN 030720

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Voestalpine Range of Supply Electrical Steel EN 030720

Uploaded by

Copyright:

Available Formats

ELECTRICAL STEEL – isovac®

voestalpine Steel Division

2 ELECTRICAL STEEL – isovac ®

4 ELECTRICAL STEEL – isovac ®

6 ELECTRICAL STEEL – isovac ®

isovac® fully processed high-strength

8 ELECTRICAL STEEL – isovac ®

Further NO grades are available upon request.

10 ELECTRICAL STEEL – isovac ®

isovac® semi-processed high-perm

isovac® semi-processed high-efficiency

12 ELECTRICAL STEEL – isovac ®

14 ELECTRICAL STEEL – isovac ®

Measurement of fracture elongation: A

16 ELECTRICAL STEEL – isovac ®

isovac® 0.25 - 1.00 1600 2000 600

Requirements C-3 Backlack C-5 C-6

Selected services Customized thicknesses can be supplied for individual solutions.

18 ELECTRICAL STEEL – isovac ®

voestalpine Steel Division

You might also like